Hi,
I'm having a problem installing TWRP on my doogee X5, in order to root the device. I have tried to flash the recovery with sp flash tool, and every time I try, I can boot to the boot mode menu, select "recovery" and see the doogee logo for a while, then a black screen, then the doogee logo again, following into a normal boot.
This is the X5, not the X5 pro.
firmware on phone: "DOOGEE-X5-B-Android5.1-2016.03.18"
Any help?
PS: I don't want to use kingroot to root the phone, as I also want xposed.
I'm looking for a solution to that very problem too. Let's see if someone comes to help!
Exactly the same goes here too. Probably there's not an updated TWRP for V18 which I am using. I have not the slightest idea who could help us.
Rooting Doogee X5 / TWRP install
Here's what worked for me, thought I'd share this.
Out of the box was on version 18 and wanted to root , so i blindly installed King Root which did work, i then installed Supeer SU me which changed the king root to super user. After that over a week i read that TWRP 3.0.2 worked for one person so using Flashify i flashed the recovery image , after changing it to recovery.img and it worked . Such luck right, i went on to read the forums as im in love with this device , Wakefield helpful was NEEDROM.com , you need to register but there are many roms and tools for mediatek 6580soc . Out of curiosity i downloaded some rar. File roms ACS different fish tools. The best to use if you've only got oneX5 is SP flash tool. Also look for mediatek vcom drivers which auto installs the correct drivers. There are easy to follow you tube videos fur flashing using SP Flash tool. The latest version had been updated for simplicity. the process basically is ( load .bin file in its respective area,( from Flash tool) and load scatter.txt in its box ( from rar. File) the whole interface will polemist populate plug go to format hit start plug in turned off phone without battery, it'll give red then yellow bar and a check, then unplug hi to firmware screen and choose to start dload only except bootloader, start , plug wait for coloured bars and check your done. i even had gotten errors due to a faulty dload and repeated the process till i got it. I understand that not all have the patience for this, therefore i suggest using flash tool of king root messes up though that's rare.
An alternative to supersu me is to root with king root then install twrp with flashify then you can uninstall / repack king root and flash Updateroot.Script available by someone on needrom. That includes super user and busy box. Then installxposed. Etc.
* Each process in the above proven tuturial has been obtained online from other sites not just xda. I've chosen 5.1 as an idealOS for me, I can't say the route to take fur Marshmallow.
This is for -b and non b only version 18, and 19. All others take your own chances but it's resilient chip so have fun.
(SOLVED just flash DOOGEE-X5-HOT2-6.0.zip and the twrp from the rom is installed and works after rebooting in recovery mode.) after flashing CWM recovery
Listed: 10/28/2016 11:16 pm
ROM Version: 6.0 / 5.1 to my doogeex5 (flashing succeed) i got an green android logo with an error sighn(see picture)and some chinese letters...
in normal boot no problem,also upgrading to android 6 (flashed) gave no problem...
how to get new recovery(flashing other recovery`s gave same output exept the chinese sighns disapeard)
kingroot V4.80 couldnt root my doogeex5 after 27%rooting it says cant root device
also doesnt the system update in `my device` recognice the memory card ...no sd card inserted...
any suggestions?
I have a similar problem. Unlocking the boot loader works fine, but i can't seem to find a working twrp file for my phone.
I have an X5 pro (x5pro-android5.1-r17-2015.07.01). I tried different twrp recoverys from needrom and i can flash them to the device, but if i try to boot into recovery i only get the robot with the red warning triangle. Rest of the phone works fine, but i'd like to get a working custom recovery.
Can anyone help me?
So i rooted my phone with kingroot and i wanted to install a custom recovery without breaking the device how should i move next ? My X5 is an old motherboard version android 5.1 V15-2015.11.02 and that was the last official fota update for me. Is there any ofgicial upgrade suitable for my model like android 6.0 ? Two more things. My battery goes down rapidly and i dont know if its battery or chargers problem what should i do ?
http://www.needrom.com/category/doogee/serial-x-doogee/x5-doogee/
even without rooted phone you can flash a lot of roms from above link and read how to
Yeah i noticed this site man but says you need to register first. And one more thing spft always detects scatter files as invalid or maybe not legal even from the official site of doogee. I use the spft from doogeemobile site.
I am using SP_Flash_Tool_exe_Linux_v5.1520.00.100 with ubuntu(linux) maybe try an other flashtool edition,registering needrom is simple just making username and make a password when you are registered take the inifix hot 2.6.0 for the x5 flash it and you have got also a TWRP from wich you can root or install also the .zip roms etc.
I mentioned the inifix hot2.6.0 because that was the one i had succes even with a bricked recovery caused by flashing a cwm recovery without rooting first.
Well i just want for sure make a backup of my current rom without wiping it. I guess the infinit will delete all. Plus i also want to install recovery having rooted it 1st which is easy i think on 5.1. I have the one with the old motherboard not the -b. To sum up i want to install the official updated rom V20 via sd (which i tried and didnt work) luckily it didnt brick or via spft which doesnt load scatter file says is not valid no matter if i use latest or older version of spft in order to flash it manually. Its risky to root and install a recovery by an apk without having my rom backed up 1st. And even with the spft i cant do that. I just want to fix my battery status. Thats all. I use xp pro os.
indeed it is hard to install android 5.1 roms on the doogee x5with a twrp,al the 5.1 roms i could flash,but then i bricked the recovery,wich made no differend for the installed 5.1 roms,they just work.i can only install a working twrp by flashing Infinix Hot 2 6.0,wich is a 6.0 rom,but as far as i know you cant install a 5.1 rom with a 6.0 twrp... error 7.
Thats why we will end this discussion for now and wait for future solutions. Thx for your concern man. I just dont want to brick it since it runs smoothly with 5.1. As i said before i wanted to install the latest (official stock) V20 rom recently released. But i cant do it even from the tutorial that exists on their forum. It's a use of spft but i cant manage to do it. Scatter file always invalid.V20 Rom fixes some bugs and displays your interface like on 6.0 android version. We talk mate.
Hello !
Any news on the matter ?
I have got an X5 with Android 6 (!) on it. Have tried to root it with several one-click tools but this does not work.
Any suggestions?
Hi! What room do you recommend The most stable, And best, Under flashtool To Doogee X5? Thanks in advance for help!
hello i need help on my doogee x5 all 6.0 custom rom flash give me error 11 on twrp how to fix please ,
Any help please?
I have error 7 on all rom
Help?
Having tried to install TWRP it is rejected
Having downloaded twrp_x5max.img from needrom and used the adp method of installing the TWRP.img (https://www.xda-developers.com/how-to-install-twrp/). I get the following error message. "writing 'recovery'...
FAILED (remote: download for partition 'recovery' is not allowed".
So How do I get the TWRP img loaded into the Doogee X5Max (not pro) android with marshmallow?
I have tried using SP FlashTool and it says installed successfully, but I still get the default recovery program, after the dead robot with triangle and a exclamation mark inside, when booting into recovery using keys or adb command.
Is there another way of getting this image file loaded into the recovery partition?
I have followed all the set up steps in developers mode, so why cannot I use adb?
Related
First of all I just bought Global Moto G 2014 (XT1063) from US Amazon and that was KXH21.85-23 (not updatable to Lollipop via shared OTA.)
So I did manage to unlocked the bootloader and flashed KXH21.85-17 and tried to flash the "Blur_Version.21.11.17.titan_retuglb.retuglb.en.US" which supposed to flash the Lollipop.
Unfortunately at first it failed to update me because "Printspooler.apk" mismatch the hash check. After attempt to flash (yes, I ignore the abort message and redo the process, It passed.... I don't know why) and stuck at some "xxx.apk" mismatch the hash again. After redo the process and bypass (for unknown reason that redo bypass the mismatch) I stuck at "velvet.apk" mismatch and this time It won't let me bypass and keep going on update to lollipop.
In my theory, Is it possible that I flash KXH21.85-17 from other country? Yes, any XT1063 (latin american, whereever on earth) supposed to flashable, but maybe the different country has slightly different apk. So that's why I failed the hash check.
Can anyone give me a URL or mirror to USA XT1063 for KXH21.85-17 that confirmed updatable to Lollipop? Since SBF-Dev and MotoFirmware is now down I couldn't find any.
I know what I'm saying is sound ridiculous, but I have no other theory that support my conspiracy anymore.
Hi @bankkung, I was facing similar problems. First you'd want to get back to stock kitkat which is up-gradable to Lollipop, so I would suggest downloading this file, http://180upload.com/bzl3ah1wov5g, which is 21.85-17, you can flash this file with fastboot by following this guide http://forum.xda-developers.com/moto-g-2014/general/index-guide-update-to-lollipop-android-t2941340. Next you'd want to download both Lollipop files, the first and second one. (The second one is the newest update that fixes memory management). First file: https://mega.co.nz/#!UoQ02KLQ!22OUNBctGLoAUOMd_frTRT9jgbB3tRPUa4pPqfesGho.. Second file: https://mega.co.nz/#!s8ZSVJDA!SqUWPZODvM4-GYuXo6MC2JWTmpE9_jdyqlH-ycWi78I. Download both of those files and put them somewhere accessible (like your SD card) so you can flash these in stock recovery, so after you downgrade to kitkat you can flash the first one, then boot up and then go back into stock recovery and flash the second file. I'd recommend factory resetting your phone after this to smoothen everything out.
If all else fails you can flash TWRP recovery using this guide http://forum.xda-developers.com/moto-g-2014/development/recovery-twrp-2-8-0-1-moto-g-2014-t2896165, and then download this TWRP backup of the latest Lollipop, and place it in /data/media/0/TWRP/backups/(your device name here). All of that can be done right in TWRP recovery using the file manager (no need to root your phone). https://mega.co.nz/#!59AAiQaR!cPUsNpI5j-ZaIMX10uiS93EJqpLxua-iwKHj30InX1U
I would really recommend the first option tho, just in case any other updates come you can easily upgrade your phone.
Hope I helped!
Lamech242 said:
Hi @bankkungFirst you'd want to get back to stock kitkat which is up-gradable to Lollipop, so I would suggest downloading this file, http://180upload.com/bzl3ah1wov5g, which is 21.85-17, you can flash this file with fastboot by following this guide http://forum.xda-developers.com/moto-g-2014/general/index-guide-update-to-lollipop-android-t2941340. Next you'd want to download both Lollipop files, the first and second one. (The second one is the newest update that fixes memory management). First file: https://mega.co.nz/#!UoQ02KLQ!22OUNBctGLoAUOMd_frTRT9jgbB3tRPUa4pPqfesGho.. Second file: https://mega.co.nz/#!s8ZSVJDA!SqUWPZODvM4-GYuXo6MC2JWTmpE9_jdyqlH-ycWi78I. Download both of those files and put them somewhere accessible (like your SD card) so you can flash these in stock recovery, so after you downgrade to kitkat you can flash the first one, then boot up and then go back into stock recovery and flash the second file. I'd recommend factory resetting your phone after this to smoothen everything out.
Click to expand...
Click to collapse
Hi Thanks for your help
I've done that several time and still having the same problem (yes, mine is unlocked bootloader and flashed-reflashed that 21.85-17 over twenty time right now)
Lamech242 said:
If all else fails you can flash TWRP recovery using this guide http://forum.xda-developers.com/moto-g-2014/development/recovery-twrp-2-8-0-1-moto-g-2014-t2896165, and then download this TWRP backup of the latest Lollipop, and place it in /data/media/0/TWRP/backups/(your device name here). All of that can be done right in TWRP recovery using the file manager (no need to root your phone). https://mega.co.nz/#!59AAiQaR!cPUsNpI5j-ZaIMX10uiS93EJqpLxua-iwKHj30InX1U
I would really recommend the first option tho, just in case any other updates come you can easily upgrade your phone.
Hope I helped!
Click to expand...
Click to collapse
I'm thinking about getting some Nandroid backup (never used TWRP before but I think this methond you gave is the same thing as I think) to get straight from Custom Recovery to Lollipop.
So what I need to do in the 2nd method is
a
flash TWRP
Place TWRP Backup of XT1063 Lollipop
restore
reflash Stock Recovery + Locked recovery
Is this sound corrected?
bankkung said:
Hi Thanks for your help
I've done that several time and still having the same problem (yes, mine is unlocked bootloader and flashed-reflashed that 21.85-17 over twenty time right now)
I'm thinking about getting some Nandroid backup (never used TWRP before but I think this methond you gave is the same thing as I think) to get straight from Custom Recovery to Lollipop.
So what I need to do in the 2nd method is
a
flash TWRP
Place TWRP Backup of XT1063 Lollipop
restore
reflash Stock Recovery + Locked recovery
Is this sound corrected?
Click to expand...
Click to collapse
Yes once you place the backup on your SD card, flash TWRP, reboot into recovery and go to advanced then go to file manager, then finish following the instructions above. Once you place it in the right place then you restore it. As of the stock recovery issue, it wouldn't make much sense to do that unless you followed the first option, where the stock recovery would actually be needed. But if you find a recovery image then yeah. If you do the second method you won't be able to receive updates nor update it manually unless doing the first method.. But the TWRP backup is the latest lollipop so enjoy!
If you still need help you can just flash TWRP recovery, and download this and flash it. http://forum.xda-developers.com/mot...-stock-rom-t2970427/post57438355#post57438355
Hello,
english powered by google
I desperately my Xperia SP on Android is trying to switch 4.4. Unfortunately, most Totourials are useless, alone because very often missing files or they are just out of date.
After so many problems I managed to flash my Xperia. Unfortunately nothing had the desired effect due to the files.
Currently I have the following problem which I do not get resolved:
I have loaded with the Flash tool the Cyanogenmod bootfile via fastboot, earlier I had installed CWM course with USB debugging and deactivated Bootlock. ect.
Unfortunately, he did not start the CWM but the CyanogenMod and I did not have the possibility to install the ZIP file on the SD card. Instead, I've obviously just all deleted.
Currently I have no system, but only the CyanogenMod. A flash on Standart is suddenly no longer possible FAILED (remote: Download size too large). Even when I extracted the System.sin I had problems to start them in fastboot mode.
I had previously done with older files, unfortunately the installation was on the ZIP file in recovery mode error. Why I have updated the files and all programs.
Restoring the standard firmware previously ran flawlessly ...
So I really do not go on and am really desperate.
I very much hope that my one helps the more clueless than me.
Best regards,
Ben
So i assume you now have installed official sony firmware? If yes , and you have unlocked bootloader then all you have to do is install twrp recovery(TWRP recovery for Xperia SP), then download Custom rom(i.e Cyanogenmod-Cyanogenmod builds for Xperia SP), if you like also google apps(OpenGapps) and install trough recovery. It might seem difficult, i know i did not explain it very good but its late... If you have any question or you want me to write a tutorial how to install cyanogenmod step by step just tell me.
Edit: even if you cant access the system it will be easy to install cyanogenmod
Problem Solved:
Flashtool was the Problem. I used the newest Version. After a Downgrade to 9.8.16 it worked.
Thank You very much
Hi,
I'm working with a Huawei Honour 4x, Android 6.0, Stock Rom, Model: CHE-TL00, EMUI 4.1
I'm looking to root it but could not find anything specific on google or XDA. I've read about systemless root for Android 6.0 but the material largely concerns the nexus phones.
I've got quite an odd brand with a specific model make which differs from other models of the Honour 4x.
Simply put, i'd like to root the device. Can anyone point me towards more information to achieve this ?
I've searched and failed. I'm hoping someone else may know where to look.
#Update: I have twrp installed.
#Update 2: I used TWRP to flash SuperSU. My phone failed to boot afterwards and kept looping. So i recovered using the Nandroid backup.
Back to square one. Any help would really appreciated.
#Update 3: Problem Solved. For anyone who has the same device, here are the steps to take.
1. Flash TWRP using Minimal ADB Flash and Boot
2. Use TWRP to flash the updated version of SuperSU (2.71 Beta). (HAS TO BE THIS VERSION or the latest version!!!)
Used: [BETA-SuperSU-v2.74-2-20160519174328-forced-systemless] or [BETA-SuperSU-v2.71-20160331103524]
3. Reboot; wait for a few minutes for phone to load.
4. Job done. Your phone should be rooted.
TWRP source: https://twrp.me/huawei/huaweihonor4x.html
Thanks for your sharing.
Hi, I recently updated to the 6.0 Rom and am trying to root it (using your guide)
1. Flash TWRP using Minimal ADB Flash and Boot
2. Use TWRP to flash the updated version of SuperSU (2.71 Beta). (HAS TO BE THIS VERSION or the latest version!!!)
Used: [BETA-SuperSU-v2.74-2-20160519174328-forced-systemless] or [BETA-SuperSU-v2.71-20160331103524]
3. Reboot; wait for a few minutes for phone to load.
4. Job done. Your phone should be rooted.
Click to expand...
Click to collapse
I can get my device to reboot into fastboot but it doesn't recognise the device after that?
(Just says "Waiting for device", and nothing shows up if I type 'Fastboot Devices')
Could you tell me what drivers you used? I really want to root it to try and get some space back
follow the steps anyway, dont worry if it say conecting in hisuite, and be sure u have hisuite installed, i.e, u have an hisuite.exe in the folder C:\Program Files (x86)\HiSuite\ .... and for the space, in hi suite desktop app u can uninstall some, goodluck!
Coedy said:
Hi, I recently updated to the 6.0 Rom and am trying to root it (using your guide)
I can get my device to reboot into fastboot but it doesn't recognise the device after that?
(Just says "Waiting for device", and nothing shows up if I type 'Fastboot Devices')
Could you tell me what drivers you used? I really want to root it to try and get some space back
Click to expand...
Click to collapse
I had the same issue. There're a lot of bloatware apps pre-installed which take up crucial internal space. It seems like it is a driver issue.
My process of achieving root was essentially trial and error, so there was a lot of google searching and installing; without making note of everything i installed (when concerning drivers).
So i won't pretend to be an expert but I'll list the most useful places i checked out.
Firstly, i download the basic Android command line tools from the SDK webpage.
Secondly, i followed the steps on the TWRP webpage (can't link as i'm a new user) I download their recommended drivers too.
Thirdly, (Since Huawei do support modification to an extent, you can find a set of their recommended drivers on google or on their webpage). I googled a set of USB drivers for the Honor 4x and downloaded these too.
Following this, I was able to connect my device successfully.
(Failing this, Google has a lot of content on connecting the Honour to Minimal ADB Flash and Boot. Check it out.) :good:
sr993 said:
Hi,
#Update 2: I used TWRP to flash SuperSU. My phone failed to boot afterwards and kept looping. So i recovered using the Nandroid backup.
Click to expand...
Click to collapse
Hi, my model is Ch2-L11 and I'm very noob and very likely to mess up the whole phone, so I was wondering How did you created a nandroid backup?
I installed the minimal adb tool that you suggested in your post. should I use "adb backup all" in cmd? or creating a nandroid backup is different?
Why not sharing where you sourced the TWRP you used is a mystery and makes this correctly referenced thread rather worthless.
thanks for share..
Hi
Been having some major issues with installing Supersu.
Using a Sony M4 with Android 6 Marshmallow on it.
Phone is ok, but it crap on space hence well the desire to root it.
Now i've managed to unlock the boot loader
get TWRP Installed - using the project marshmallow altervista web page ( not allowed to post the link.) version 3 believe it is
Now when I go to install it, found the method that you use via the pc and using adb sideload does not even detect.
So booted up on twrp
Mounted the system and other partitions.
And then this where things start going pete tong.
I've tried to install supersu from internal storage, from SD card.
When I've finished the install it boots up and then it just goes on the wave boot screeen for ever.
Talking like 40 minutes, whacked in a fridge to keep cool.
Luckly I been able to use flashtool by androxyde to get my phone back. And well tried different versions of super su.
Some are able to load android after install, but when you do a root check, no root is installed.
Please can you advise....
cheers
blue
Welcome everyone!
This thread has been created for extreme newbies/noobs and for their benefit. Not only noobs, but everyone is free to post questions and also give answers to those questions. Any type of question is allowed as long as it is related about the device. No off-topic discussions are allowed!
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
Honor 4x hanged (in some Indian kitkat version, not rooted) and after restart it is in bootloop. Honor logo appears then blue light starts to appear then restart.
Recovery mode and dload update not working.
After unlocking bootloader tried fastboot -w, still in bootloop.
Extracted Lollipop, Marshmallow, Kitkat - B161, B126 and flashed in fastboot. Possible to flash only recovery, boot, userdata & system. For others - failed : remote command not allowed. After flashing no change, still in bootloop.
Tried to boot to recovery from fastboot boot
- for lollipop and marshmallow recoveries it says "dtb not found"
- others including twrp, cm it is in bootloop.
Out of warranty.
Need help.
oppili said:
Honor 4x hanged (in some Indian kitkat version, not rooted) and after restart it is in bootloop. Honor logo appears then blue light starts to appear then restart.
Recovery mode and dload update not working.
After unlocking bootloader tried fastboot -w, still in bootloop.
Extracted Lollipop, Marshmallow, Kitkat - B161, B126 and flashed in fastboot. Possible to flash only recovery, boot, userdata & system. For others - failed : remote command not allowed. After flashing no change, still in bootloop.
Tried to boot to recovery from fastboot boot
- for lollipop and marshmallow recoveries it says "dtb not found"
- others including twrp, cm it is in bootloop.
Out of warranty.
Need help.
Click to expand...
Click to collapse
Oh ****, that seems like a frustrating situation. What made the device mess up so much? Have you gone to service centres?
Regards,
PoseidonKing
Not tried to flash or root. It just hanged while using.
Service centre said board gone (as always). MTK devices have a factory mode through which we can check working of all board parts. I did not find any way for this.
oppili said:
Not tried to flash or root. It just hanged while using.
Service centre said board gone (as always). MTK devices have a factory mode through which we can check working of all board parts. I did not find any way for this.
Click to expand...
Click to collapse
Sorry bro, can't help you out over here in this situation.... Best of Luck regarding your device. I would suggest pm'ing a forum moderator for your issue
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
HELP.!!Back to Stock Rom ????
I am struggling like anything to go back to stock rom. I am using Honor 4x Che1-L04 snapdragon. Pls send a link where can i find the instructions to do this. Or Better U expain.
EDIT:
Roll back to EMUI 4.0 success. Used the Hauwei update extractor and used CMD. Anyhow THANKS
NEW Problem:
How to enable ADOPTED STORAGE in honor 4x che1-L04 snapdragon edition.
In Xda they mentioned only about the kirin processor version.
Help!!!!!!!!!!
balongc52b311 after failing kangvip 6.7.1
hey there. will tell you my experience with failing to flashing kangvip 6.7.1 due to wiping problem
i wiped my cache, data, system even internal storage and yet failed to flashing kangvip 6.7.1 4 custom rom due to "cust" folder unable to mount giving me this:
error 1 can't mount /cust (Invalid argument)
so after failing to mount that folder and even deleting it by mistake,i got a new error:
error 1 can't mount cust no such file or directory
i lost hope and let my my honor 4x normally boot but it took too long and i was determined its stuck on bootloop :cyclops:
i woke up today finding it on 5% battery and giving me that first time setup as if all i did was a factory format BUT all in chinese. checked the build number and it was balongc52b311.
i tried mounting "cust" folder to r/w and rebooted into bootloader but it gave me the same first error. i tried deleting the folder and then rebooting into recovery and it gave me the 2nd error. created the folder "/cast" and then rebooted into recovery and it gave me the same first problem that the folder can't mount EVENTHO it was mounted successfully right before i rebooted into recovery (did this 3 times to make sure)
did some researching and found a solution for honor 4c http://forum.xda-developers.com/honor-4x/help/huawei-honor-4x-balong-hi6210sft-fixed-t3324335 or two BUT both for lolllipop and i'm marshmallow.
i'm already halfway at the method i mentioned above but i stopped after i realized it was for lollipop. i rooted my mobile and changed my build number to "Che2-L11C636B330". worth to mention that my model number remained already the same "Che2-L11".
the cust folder error is still there whenever i go to the bootloader
now i have no idea what to do, what firmware to download and if i have to downgrade first to lollipop and then upgrade to marshmallow again...
my marshmallow version was the middle east final version before this balong happened: Che2-L11C185B561 and i would like to go back to it again.. thank you in advance ( :
###*UPDATED BELOW*
fixed my problem trying the method here http://forum.xda-developers.com/honor-8/help/honor-8-rooted-twrp-modaco-rom-unable-t3462039/page2
>>>>worth to mention that i flashed my oeminfo for my UPDATE.APK REGION before flashing the extracted files from UPDATE.APP "wasn't mentioned in that method"
now i'm back to my original marshmallow version "middle east". good luck people.
abdurrahmanzaki said:
hey there. will tell you my experience with failing to flashing kangvip 6.7.1 due to wiping problem
i wiped my cache, data, system even internal storage and yet failed to flashing kangvip 6.7.1 4 custom rom due to "cust" folder unable to mount giving me this:
error 1 can't mount /cust (Invalid argument)
so after failing to mount that folder and even deleting it by mistake,i got a new error:
error 1 can't mount cust no such file or directory
i lost hope and let my my honor 4x normally boot but it took too long and i was determined its stuck on bootloop :cyclops:
i woke up today finding it on 5% battery and giving me that first time setup as if all i did was a factory format BUT all in chinese. checked the build number and it was balongc52b311.
i tried mounting "cust" folder to r/w and rebooted into bootloader but it gave me the same first error. i tried deleting the folder and then rebooting into recovery and it gave me the 2nd error. created the folder "/cast" and then rebooted into recovery and it gave me the same first problem that the folder can't mount EVENTHO it was mounted successfully right before i rebooted into recovery (did this 3 times to make sure)
did some researching and found a solution for honor 4c http://forum.xda-developers.com/honor-4x/help/huawei-honor-4x-balong-hi6210sft-fixed-t3324335 or two BUT both for lolllipop and i'm marshmallow.
i'm already halfway at the method i mentioned above but i stopped after i realized it was for lollipop. i rooted my mobile and changed my build number to "Che2-L11C636B330". worth to mention that my model number remained already the same "Che2-L11".
the cust folder error is still there whenever i go to the bootloader
now i have no idea what to do, what firmware to download and if i have to downgrade first to lollipop and then upgrade to marshmallow again...
my marshmallow version was the middle east final version before this balong happened: Che2-L11C185B561 and i would like to go back to it again.. thank you in advance ( :
###*UPDATED BELOW*
fixed my problem trying the method here http://forum.xda-developers.com/honor-8/help/honor-8-rooted-twrp-modaco-rom-unable-t3462039/page2
>>>>worth to mention that i flashed my oeminfo for my UPDATE.APK REGION before flashing the extracted files from UPDATE.APP "wasn't mentioned in that method"
now i'm back to my original marshmallow version "middle east". good luck people.
Click to expand...
Click to collapse
Thanks on the update about your success on restoring your phone. Surely some poor soul will get along the same problem and your post will help him out. Sorry for the late reply btw.
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
How to Root my honor 4x Che2-L11?
Hi everyone, I'm noob, so I need a step to step guide if there's such a thing
my android version is 6.0 and EMUI 4.0
I have bootloader code for unlocking the phone, thanks in advance guys, also happy new year :good:
Phone Honor 4x (che1-L04) Stuck in fastboot mode
My phone is stuck in fastboot mode. Couldn't get the bootloader unlock key online as it requires the product id which can be obtained by dialing a number which isn't possible. I have requested directly from the customer care number and the official chat portal as well but its been more than a week and still they are asking for 24 working hours. Is there any alternative method of getting the key or atleast the Product ID?
Model name :Che1-L04
Stuck in Fastboot & Rescue mode with the bootloader locked.
I got unlock key after 12 days. Honor 4x hanged after restart it is in bootloop.
3 button sd card update not working ?
oppili said:
I got unlock key after 12 days. Honor 4x hanged after restart it is in bootloop.
3 button sd card update not working ?
Click to expand...
Click to collapse
No the update.app isnt working I guess because I have already flashed the CM13 recovery image with the bootloader locked. However, I recieved the bootloader key yesterday from the email but when I tried unlocking by the fastboot command it said it is an invalid or wrong key. Is there any other way to take my phone back to stock condition atleast without actually unlocking the Bootloader?
Princeshubh said:
No the update.app isnt working I guess because I have already flashed the CM13 recovery image with the bootloader locked. However, I recieved the bootloader key yesterday from the email but when I tried unlocking by the fastboot command it said it is an invalid or wrong key. Is there any other way to take my phone back to stock condition atleast without actually unlocking the Bootloader?
Click to expand...
Click to collapse
1. Try "fastboot continue" it will directly boot without going to recovery.
2. If fastboot flash works flash recovery of the firmware installed in phone before bootloop.
3. If still not works flash boot, system, recovery (in this order) of firmware installed before bootloop.
Confirm unlock key with customer care if it is still locked.
I wanna know is there any other method to install xposed framework since the normal installation is not working for me.
Using Honor 4x Che1-l04 running on (stock ROM) Android marshmallow 6.0.1, have TWRP custom recovery and is rooted.
SumitGupta2442 said:
I wanna know is there any other method to install xposed framework since the normal installation is not working for me.
Using Honor 4x Che1-l04 running on (stock ROM) Android marshmallow 6.0.1, have TWRP custom recovery and is rooted.
Click to expand...
Click to collapse
no other way, unfortunatly.. one way or the other, you have to flash the zip...
ps: if you are on emui, first boot after flashing xposed will take a really long time.. mine took around 25 minutes to boot.. so dont consider it a boot loop, wait untill 30 minutes and you will be profitted
Mine was in boot screen for around 3 minutes and then rebooted into recovery. Same thing was happening again and again. So at last did the restore process from TWRP.
oppili said:
1. Try "fastboot continue" it will directly boot without going to recovery.
2. If fastboot flash works flash recovery of the firmware installed in phone before bootloop.
3. If still not works flash boot, system, recovery (in this order) of firmware installed before bootloop.
Confirm unlock key with customer care if it is still locked.
Click to expand...
Click to collapse
Its not working. Please help me I am still stuck....any way of installing the stock ROM back via fastboot mode with the phone showing 'Phone Locked'
Restoring TOO MUCH with twrp?
Can restoring too much with TWRP damage my phone?
jwalker9715 said:
Can restoring too much with TWRP damage my phone?
Click to expand...
Click to collapse
not really..