Related
Hello,
I have bought an Honor 5C, chinese version (NEM-UL10).
Can i flash any of the international (european) roms?
Thank you
Miguel
mjjferreira said:
Hello,
I have bought an Honor 5C, chinese version (NEM-UL10).
Can i flash any of the international (european) roms?
Thank you
Miguel
Click to expand...
Click to collapse
nop, only flash the one intended for ur model no
otherwise u may brick ur device:crying:
It does not work for the model NEM-AL10 3GB RAM, get a brick! AL10-2GB - lost SIM 100%
CHANGE OF THE LOCATION OF CN - EU
for the further ROM installation
To UNBLOCK the LOADER! SURELY!
Using TWRP installed instead "eRecovery" (recovery2) !!!
BACKUP for TWRP is ALSO OBLIGATORY!
(surely drill the status of an unblocking of the loader)
1) We establish hw_EU.zip through TWRP (Using TWRP installed instead "eRecovery" (recovery2)), after installation click reload.
2) The device will not be able to load the system , reboot and launch itself stock recovery, will be reset to factory default settings , you press SHUTDOWN button.
3) Turn on phone. Long start and optimization. Tapping the build number in Settings -> About 7 times, then going back and selecting the option from the Development menu.
Enable "OEM unlock" in the Development menu. So we will have flashing opportunity phone through fastboot if we receive a brick!
4) We throw on the card dload folder with UPDATE.APP firmware file on the region -EU (NEM-L51C432Bxxx), insert the card into the phone turned off , click the three buttons , waiting for the start of the upgrade process and all !!!)))
:good::good:
PS: In my hw_EU.zip archive three files are used:
custom.bin - the file in which contains one record in which belonging to the region - Vendor Country Info is specified
oeminfo - the binary file, contains information on a phone model and on the version of a firmware
build.prop - the system file from a specific firmware
All these three files from the European firmware of NEM-L51
Don't use this archive for change of a location in other phone models of Honor!!!
This archive - it isn't simple to replace a method a location
This archive - preparation of phone for the subsequent updating by a firmware from the European NEM-L51 model
You need to debrand your phone.
DRUGER said:
method has
I made the transition from Russian (European) firmware to the Chinese , and the Chinese in the European , fingerprint scanner is 100 %
CHANGE OF THE LOCATION OF CN - EU
for the further ROM installation
To UNBLOCK the LOADER! SURELY! To establish TWRP!
BACKUP for TWRP is ALSO OBLIGATORY!
(surely drill the status of an unblocking of the loader)
1) We establish hw_EU.zip through TWRP, after installation, we SWITCH OFF phone, you don't reboot!!!!
2) We return stock recovery, we do reboot, the device won't be able to load system, itself to reboot and will start stock recovery, there will be a dumping to factory, press the SHUTDOWN button
3) We turn on the device as usual, minutes 2-3 can hang on HONOR'S prompt, control of system and start of the device will go!
4) In the engineering menu we check vendor, in information about phone model and number of assembly
5) We throw in the dload folder, on a SD card, the firmware file from the region-EU, we insert the card into the switched-off phone, we press three buttons and wait for the update process!!!
Click to expand...
Click to collapse
does this work?????
has anyone tried??
venom007 said:
does this work?????
has anyone tried??
Click to expand...
Click to collapse
Finalize instructions, now all quickly and easily!
tested 100%
DRUGER said:
Finalize instructions, now all quickly and easily!
tested 100%
Click to expand...
Click to collapse
Good job
DRUGER said:
Finalize instructions, now all quickly and easily!
tested 100%
Click to expand...
Click to collapse
thats cool
As it worked for the 5x, it should work on almost any recent honor device, again good job
PalakMi said:
As it worked for the 5x, it should work on almost any recent honor device, again good job
Click to expand...
Click to collapse
I don't advise to use my instruction in other Honor devices for the reason that I used files specifically for NEM model!
it would work on device which has twrp support.
venom007 said:
it would work on device which has twrp support.
Click to expand...
Click to collapse
In my hw_EU.zip archive three files are used:
custom.bin - the file in which contains one record in which belonging to the region - Vendor Country Info is specified
oeminfo - the binary file, contains information on a phone model and on the version of a firmware
build.prop - the system file from a specific firmware
All these three files from the European firmware of NEM-L51
Once again I repeat!!! Don't use this archive for change of a location in other phone models of Honor!!!
This archive - it isn't simple to replace a method a location
This archive - preparation of phone for the subsequent updating by a firmware from the European NEM-L51 model
DRUGER said:
I don't advise to use my instruction in other Honor devices for the reason that I used files specifically for NEM model!
Click to expand...
Click to collapse
Roger that
can I use this method to change my nmo-l31 to the European NEM-L51 model ?
LIONS1 said:
can I use this method to change my nmo-l31 to the European NEM-L51 model ?
Click to expand...
Click to collapse
as said,only for NEM model
LIONS1 said:
can I use this method to change my nmo-l31 to the European NEM-L51 model ?
Click to expand...
Click to collapse
Don't even think about it
Just did this on my NEM-L21, and now I have an NEM-L51 ... So it works just fine
LINJEinc said:
Just did this on my NEM-L21, and now I have an NEM-L51 ... So it works just fine
Click to expand...
Click to collapse
do u have any problems so far after changing???
venom007 said:
do u have any problems so far after changing???
Click to expand...
Click to collapse
No problems so far, but haven't testing so much, have other things to do right now so.
But i will test more tonight after school.
LINJEinc said:
No problems so far, but haven't testing so much, have other things to do right now so.
But i will test more tonight after school.
Click to expand...
Click to collapse
ok, test it and report back
Hello,
My P9 is completed Wiped and dont want to Install a Firmware via DLOAD everytime i try to install it fails.
I cant use Fastboot because i have the Bootloader Unlock but the OEM is Locked.
I dont have the TWRP Recovery i only have the eRecovery.
Please Help me ..Thank you...
Mangono said:
Hello,
My P9 is completed Wiped and dont want to Install a Firmware via DLOAD everytime i try to install it fails.
I cant use Fastboot because i have the Bootloader Unlock but the OEM is Locked.
I dont have the TWRP Recovery i only have the eRecovery.
Please Help me ..Thank you...
Click to expand...
Click to collapse
I guess you and I are stuck with the same problem.
jonezie said:
I guess you and I are stuck with the same problem.
Click to expand...
Click to collapse
I solved The Problem if you need help say it
Mangono said:
I solved The Problem if you need help say it
Click to expand...
Click to collapse
Please help me out
Guide
jonezie said:
Please help me out
Click to expand...
Click to collapse
So i cant Garantee that this will work for you but it worked verry fine with my (EVA-L09).
1. I started my P9 in Fastboot Mode (Hold Volume Down + Connect USB Cable)
2. I used the Programm DC Phonix 35 at First and used Method 2 (see Link). I used the File for the Dual Sim Version (EVA-L19, you find the File on the Data Base of the DC Phonix Tool) of the P9 because there is no Version for the Solo Sim. But it worked verry fine.
3. After i completed Method 2 i started the Phone and saw that it worked again but it is an verry small android version with no function exept Phone Settings and some Huawei Internal Software.
4. I restarted the Phone into the Fastboot Mode and used Method 1 with the Update.app of the Firmware EVA-L09C432B136. But only do step 1. Step 2 will not work !! After the Process was completed i restarted it and it worked.
5. After that i Searched in the Android Options for an Update and found the EVA-09C432B182. You need to install it to fix some errors. After the Phone installed by itself the B182. I used the Huawei Updater with the Hisuite to Upgrade to B361 because the Phone didnt found a new Version by itself. Guide for Huawei Updater with Software Links
And now my P9 is on the EVA-09C42B361 and can find updates by itself i know the new B383 is out but i will wait a week than the Phone will find the Update by itself and i dont want to Brick it again. In the next Days your Phone will show you that the B383 is avalible.
I hope my Little Guide can Help you. If you have any Problems please write me I know that the DC Phonix tool costs Money but it was the only way it helped me. But i have some credits left at my account i think you can use them if you want
Sorry for my Bad english if there are some questions left please write me
Mangono said:
So i cant Garantee that this will work for you but it worked verry fine with my (EVA-L09).
1. I started my P9 in Fastboot Mode (Hold Volume Down + Connect USB Cable)
2. I used the Programm DC Phonix 35 at First and used Method 2 (see Link). I used the File for the Dual Sim Version (EVA-L19, you find the File on the Data Base of the DC Phonix Tool) of the P9 because there is no Version for the Solo Sim. But it worked verry fine.
3. After i completed Method 2 i started the Phone and saw that it worked again but it is an verry small android version with no function exept Phone Settings and some Huawei Internal Software.
4. I restarted the Phone into the Fastboot Mode and used Method 1 with the Update.app of the Firmware EVA-L09C432B136. But only do step 1. Step 2 will not work !! After the Process was completed i restarted it and it worked.
5. After that i Searched in the Android Options for an Update and found the EVA-09C432B182. You need to install it to fix some errors. After the Phone installed by itself the B182. I used the Huawei Updater with the Hisuite to Upgrade to B361 because the Phone didnt found a new Version by itself. Guide for Huawei Updater with Software Links
And now my P9 is on the EVA-09C42B361 and can find updates by itself i know the new B383 is out but i will wait a week than the Phone will find the Update by itself and i dont want to Brick it again. In the next Days your Phone will show you that the B383 is avalible.
I hope my Little Guide can Help you. If you have any Problems please write me I know that the DC Phonix tool costs Money but it was the only way it helped me. But i have some credits left at my account i think you can use them if you want
Sorry for my Bad english if there are some questions left please write me
Click to expand...
Click to collapse
Thanks so much for your help. I'll follow these steps as you've stated and see how it goes. By the way, I'm on single-sim Eva-L09C432B378. I'll try use the DC Phoenix 35 but it will cost me money as you've said. May I please use your leftover credits at your account?
Thanks in advance
jonezie said:
Please help me out
Click to expand...
Click to collapse
No Problem Please write me a Personal Message i dont Post My Account in this Public Thread
That is my first time to post a Thread in XDA so bare with me
First of all i saw 2 persons with P10 plus stuck in erecovery+no twrp+locked bootloader+unable to unlock Bl
so i searched around the forums with the same problem there is bits of solutions there and here but not a complete one
so i unlocked my phone installed twrp and started the process with no twrp help only using my pc and Firmware finder app on pc
only pick firmware according to your model number
so requirements
1-working pc with windows
2-a USB cable
3-some knowledge of your router system and how to change the DNS in my case it was (ZTE) mostly your default router IP is (192.168.1.1) user:admin pass:admin
4-Firmware application on PC (https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146) download it Open Firmware Finder PC Program Now click on common Base. look for your Firmware in my case i wrote (VKY-L29C185) Now on your Firmware Change-log link right click Copy address (Tip Do not take a firmware that is not approved yet to be safe as an example i picked VKY-L29C185B171 though B172 is approved i took B171 and you can update via OTA later) after you copy the address go firmware finder and go to proxy tab and follow the steps from there
here some pictures of the process in the Attachments
(sorry for my bad English)
i took the idea from that Thread (https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165) Thanks to him and to my friends on Telegram group @Blackball
Mohamed Hasan said:
That is my first time to post a Thread in XDA so bare with me
First of all i saw 2 persons with P10 plus stuck in erecovery+no twrp+locked bootloader+unable to unlock Bl
so i searched around the forums with the same problem there is bits of solutions there and here but not a complete one
so i unlocked my phone installed twrp and started the process with no twrp help only using my pc and Firmware finder app on pc
only pick firmware according to your model number
so requirements
1-working pc with windows
2-a USB cable
3-some knowledge of your router system and how to change the DNS in my case it was (ZTE) mostly your default router IP is (192.168.1.1) user:admin pass:admin
4-Firmware application on PC (https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146) download it Open Firmware Finder PC Program Now click on common Base. look for your Firmware in my case i wrote (VKY-L29C185) Now on your Firmware Change-log link right click Copy address (Tip Do not take a firmware that is not approved yet to be safe as an example i picked VKY-L29C185B171 though B172 is approved i took B171 and you can update via OTA later)
here some pictures of the process in the Attachments
(sorry for my bad English)
i took the idea from that Thread (https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165) Thanks to him and to my friends on Tumbler group @Blackball
Click to expand...
Click to collapse
Thank you again sir.. But your late my phone now ,is in huawei centre.. ??
I need to try this but my phone is there.
Mohamed Hasan said:
That is my first time to post a Thread in XDA so bare with me
First of all i saw 2 persons with P10 plus stuck in erecovery+no twrp+locked bootloader+unable to unlock Bl
so i searched around the forums with the same problem there is bits of solutions there and here but not a complete one
so i unlocked my phone installed twrp and started the process with no twrp help only using my pc and Firmware finder app on pc
only pick firmware according to your model number
so requirements
1-working pc with windows
2-a USB cable
3-some knowledge of your router system and how to change the DNS in my case it was (ZTE) mostly your default router IP is (192.168.1.1) user:admin pass:admin
4-Firmware application on PC (https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146) download it Open Firmware Finder PC Program Now click on common Base. look for your Firmware in my case i wrote (VKY-L29C185) Now on your Firmware Change-log link right click Copy address (Tip Do not take a firmware that is not approved yet to be safe as an example i picked VKY-L29C185B171 though B172 is approved i took B171 and you can update via OTA later)
here some pictures of the process in the Attachments
(sorry for my bad English)
i took the idea from that Thread (https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165) Thanks to him and to my friends on Telegram group @Blackball
Click to expand...
Click to collapse
thanks,
i solve my problem with bricked P10 : https://forum.xda-developers.com/p1...d-frp-lock-t3727666/post75015364#post75015364
skiswim said:
thanks,
i solve my problem with bricked P10 : https://forum.xda-developers.com/p1...d-frp-lock-t3727666/post75015364#post75015364
Click to expand...
Click to collapse
did you solve it ? can you post your result for the benefit of all others
Eyezcripz said:
Thank you again sir.. But your late my phone now ,is in huawei centre..
I need to try this but my phone is there.
Click to expand...
Click to collapse
no problem mate we all are here to help each other
Mohamed Hasan said:
did you solve it ? can you post your result for the benefit of all others
Click to expand...
Click to collapse
before was imposibele to unlock Bootloader so device was be stuck in Bootloader with status:
Phone RELOCKED
frp: LOCK.
with methode eRecovery was simply flash firmware with Locked Bootloader!!
skiswim said:
before was imposibele to unlock Bootloader so device was be stuck in Bootloader with status:
Phone RELOCKED
frp: LOCK.
with methode eRecovery was simply flash firmware with Locked Bootloader!!
Click to expand...
Click to collapse
this tutorial is easy .. you said ur phone and my phone same problem .. this is the 1st tutorial to teach you in funkyteam...:good: erecovery...
btw my phone now is in huawei centre.. they call me later for the result ..if bad result and they said change motherboard .. i try this thread 1st before agree to them..
edit: Work very fine! All good but on my vky-l09 activate automatic dual sim .. i don't not whay but...
Bootloader it's lock automatic so it's good for warranty ...
So all fine only dual sim activat ... is there any way to remove the dual sim?
bondaru18 said:
edit: Work very fine! All good but on my vky-l09 activate automatic dual sim .. i don't not whay but...
Bootloader it's lock automatic so it's good for warranty ...
So all fine only dual sim activat ... is there any way to remove the dual sim?
Click to expand...
Click to collapse
It is good for you that it works but I do not understand the part about dual sim
Mohamed Hasan said:
It is good for you that it works but I do not understand the part about dual sim
Click to expand...
Click to collapse
Ok, my huawei p10 plus have soft/rom from TIM MOBILE ITALIA VKY-L09C55B140 so unlock bootloader, instal twrp , instal oeminfo from C432 and your procedure ...
So, all good , phone works very well but i don't no why dual SIM option was enabled...
I don't instal nothing from L29 or annithing from dual sim version...
bondaru18 said:
Ok, my huawei p10 plus have soft/rom from TIM MOBILE ITALIA VKY-L09C55B140 so unlock bootloader, instal twrp , instal oeminfo from C432 and your procedure ...
So, all good , phone works very well but i don't no why dual SIM option was enabled...
I don't instal nothing from L29 or annithing from dual sim version...
Click to expand...
Click to collapse
What oeminfo you used VKY-L29C432 or VKY-L09C432
mohamed hasan said:
what oeminfo you used vky-l29c432 or vky-l09c432
Click to expand...
Click to collapse
vky-l09c432
bondaru18 said:
vky-l09c432
Click to expand...
Click to collapse
Sry but i do not know what is the problem and why you got dual sim option but i think it is due to rebrand
Mohamed Hasan said:
That is my first time to post a Thread in XDA so bare with me
First of all i saw 2 persons with P10 plus stuck in erecovery+no twrp+locked bootloader+unable to unlock Bl
so i searched around the forums with the same problem there is bits of solutions there and here but not a complete one
so i unlocked my phone installed twrp and started the process with no twrp help only using my pc and Firmware finder app on pc
only pick firmware according to your model number
so requirements
1-working pc with windows
2-a USB cable
3-some knowledge of your router system and how to change the DNS in my case it was (ZTE) mostly your default router IP is (192.168.1.1) user:admin pass:admin
4-Firmware application on PC (https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146) download it Open Firmware Finder PC Program Now click on common Base. look for your Firmware in my case i wrote (VKY-L29C185) Now on your Firmware Change-log link right click Copy address (Tip Do not take a firmware that is not approved yet to be safe as an example i picked VKY-L29C185B171 though B172 is approved i took B171 and you can update via OTA later)
here some pictures of the process in the Attachments
(sorry for my bad English)
i took the idea from that Thread (https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165) Thanks to him and to my friends on Telegram group @Blackball
Click to expand...
Click to collapse
It that it? The howto ends with "Now on your Firmware Change-log link right click Copy address..."
What's the next step?
t.kijas said:
It that it? The howto ends with "Now on your Firmware Change-log link right click Copy address..."
What's the next step?
Click to expand...
Click to collapse
Sry i forgot to put that step in the thread but after you copy the address go to Firmware finder proxy tab and follow the steps from there
I did everything. Downloading package from server stuck at 0%
2% now, extremely slow lol
---------- Post added at 02:20 PM ---------- Previous post was at 02:03 PM ----------
Downloading update failed after waiting for ~20 minutes. I'd appreciate help
This works. Thanks for the effort posting.
D_avi_D said:
I did everything. Downloading package from server stuck at 0%
2% now, extremely slow lol
---------- Post added at 02:20 PM ---------- Previous post was at 02:03 PM ----------
Downloading update failed after waiting for ~20 minutes. I'd appreciate help
Click to expand...
Click to collapse
For mi works fine! Yes it's very slow but works...
my phone huawei nova 2i
fastboot:
Phone RELOCKED
frp: LOCK
how to fix it
my phone can't boot system
tks
anhminhvip said:
my phone huawei nova 2i
fastboot:
Phone RELOCKED
frp: LOCK
how to fix it
my phone can't boot system
tks
Click to expand...
Click to collapse
1. change your router DNS
2. use the FF software, find your package in firmware finder, and set it in proxy, and then double check your eRecovery in the same proxy window.
3. start the phone with eRecovery, you should be good to go.
Follow the original thread, there are bits here and there, if you read it a few times, you should be fine.
download tool from download link below
open tool and put your phone into edl mode
select redmi 4x in xiaomi tab press remove account
voilaaa your done
http://www.mediafire.com/file/6tnf48r4vrvv6m4/MIKO TOOL V1.0-MobileRdx.com.rar
Link to a PC program (on mediafire.com after some ad pages) named MIKO TOOL V1.0 to "fix software issues" on different cell phones.
I wouldn't dare to try it myself.
You can try its very easy , i used this and unlock many mi devices
waiting for someone review
fahmiyufrizal said:
waiting for someone review
Click to expand...
Click to collapse
No need to review , its working
maximran said:
You can try its very easy , i used this and unlock many mi devices
Click to expand...
Click to collapse
You Unlock device bootloader by removing its mi accountnot sure about what you just say.
must wait for someone review btw.
Its not unlocking bootloader , it will unlock ur mi id you have to be in edl mode
maximran said:
Its not unlocking bootloader , it will unlock ur mi id you have to be in edl mode
Click to expand...
Click to collapse
So, if I understand you correctly:
1. you register your phone on MIUI site, you get a user identifier
2. you apply for unlocking bootloader, you get a permission, you unlock bootloader with official miui unlocker
3. you enter recovery and install one of the MIUI ROMs from MIUI website, because you want to use MIUI OS
4. but you don't want your phone to be registered to your MIUI account
5. so you start phone in bootloader, connect it to your PC/notebook etc. and you use Miko tools to remove MIUI account???
I don't get it what is the sense of all of this.
Or is there a "secret identifier number" in your Redmi 4x santoni, regardless what OS you use?
And this tool I don't know looks dangerous.
Does anyone want to do a test and write a review of what you can do whit this tool?
ecsvik said:
So, if I understand you correctly:
1. you register your phone on MIUI site, you get a user identifier
2. you apply for unlocking bootloader, you get permission, you unlock bootloader with official miui unlocker
3. you install one of the MIUI ROMs from MIUI website, because you want to use your MIUI OS
4. but you don't want your phone to be registered to your MIUI account, so you use Miko tools to remove MIUI account
I don't get it what is the sense of all of this.
Or is there a "secret identifier number" in your Redmi 4x santoni, regardless what OS you use?
And this tool I don't know looks dangerous.
Does anyone want to do a test and write a review of what you can do whit this tool?
Click to expand...
Click to collapse
I used this tool and basically its remove ur Persist.img
maximran said:
I used this tool and basically its remove ur Persist.img
Click to expand...
Click to collapse
Doesn't sound good
search MIUI persist.img
---------- Post added at 07:30 AM ---------- Previous post was at 07:18 AM ----------
This "EDL mode" (stands for Qualcomm Emergency Donwload Mode) confuses me. Could someone explain it in details, or give me a link about it?
It was written, you can use it to unharbrick phone, but EDL mode requires bootlader, so I don't get it how could you use it for unhardbricking.
You can enter into EDL mode on a completly dead phone (no recovery nor bootlader works, or phone doesn't turn on) by connecting hardware test points under the cover of phones while it's connected to PC by USB cable.
ecsvik said:
Doesn't sound good
search MIUI persist.img
---------- Post added at 07:30 AM ---------- Previous post was at 07:18 AM ----------
This "EDL mode" (stands for Qualcomm Emergency Donwload Mode) confuses me. Could someone explain it in details, or give me a link about it?
It was written, you can use it to unharbrick phone, but EDL mode requires bootlader, so I don't get it how could you use it for unhardbricking.
You can enter into EDL mode on a completly dead phone (no recovery nor bootlader works, or phone doesn't turn on) by connecting hardware test points under the cover of phones while it's connected to PC by USB cable.
Click to expand...
Click to collapse
You need to unlock bootloader or you need to open back cover and use test points, if you want to know test points just search on YouTube how to test point in redmi 4x
NICE program sir,thanks for sharing
maximran said:
You need to unlock bootloader or you need to open back cover and use test points, if you want to know test points just search on YouTube how to test point in redmi 4x
Click to expand...
Click to collapse
U have to write at the OP, this tool used to remove mi account on UNLOCKED BOOTLOADER
Kuato said:
U have to write at the OP, this tool used to remove mi account on UNLOCKED BOOTLOADER
Click to expand...
Click to collapse
No it doesn't need unlocked bootloader , its only need edl mode , use test points
Kuato said:
U have to write at the OP, this tool used to remove mi account on UNLOCKED BOOTLOADER
Click to expand...
Click to collapse
Could someone explain me what does "removing MI account" means in practice?
Does it make difference on a custom ROM or it has meaning only on MIUI Android OS?
(btw... my PERSIST partition shows 0 byte size in TWRP backup... tho it might not be true.)
maximran said:
No it doesn't need unlocked bootloader , its only need edl mode , use test points
Click to expand...
Click to collapse
I got the point. Nice buddy, we don't nid special flasher anymore, does this work on other model?
Kuato said:
I got the point. Nice buddy, we don't nid special flasher anymore, does this work on other model?
Click to expand...
Click to collapse
Every model of redmi devices
Kuato said:
I got the point. Nice buddy, we don't nid special flasher anymore
Click to expand...
Click to collapse
It is a special flasher itself If you meant that it's more universal than MI Flash Tool, then the answer is yes.
But once you have to dismantle your phone to play with test points, it's already too complicated, should do only if phone doesn't turn on or no bootloader.
is it works on miui 10?
maximran said:
download tool from download link below
open tool and put your phone into edl mode
select redmi 4x in xiaomi tab press remove account
voilaaa your done
http://www.mediafire.com/file/6tnf48r4vrvv6m4/MIKO TOOL V1.0-MobileRdx.com.rar
Click to expand...
Click to collapse
i finish this method but now my 4X cannot start if i charging show battery but i i press power cannot start how to fix this thanks for anwser
Hello guys, after some struggle trying to unbrick my poco m3 pro, i faced a new probem, my IMEI has gone, as a noob that i am, i didn't made any kind of backup, i'm trying alot of ways, and still i didn't had any luck to re-write my IMEI (i still jave the numbem on the box of the phone) to the device, i'm using linux, almost everything that i found is to windows, does jave any kind of tool for linux, or i'll have to put windows on my laptop just for this porpouse?
there is anychance to use mtkdrive tool, the same used to bypass security for sp tools to do this ?
thanks for now
if your mobile services works, write imei is not necessary. and it's a dangerous operation. so if your devices now works fine, my suggestion is DON'T TOUCH ANYTHING
all my old phones that after modding lost originals imei worked without problems
a mobile sim could work also with all imei numbers=0
sadly my mobile service don't work, i keep zero signal, and when i try to get IMEI numbers on Settings > About device, it says unknown on both IMEis
ok
first try your sim into another device to be sure is not damaged
second search xiaomi redmi note 10 5g fastboot engineering rom and flash. this rom should repair some high problems like your.
if boot and all work fine, update to miui13. good luck
wetito said:
ok
first try your sim into another device to be sure is not damaged
second search xiaomi redmi note 10 5g fastboot engineering rom and flash. this rom should repair some high problems like your.
if boot and all work fine, update to miui13. good luck
Click to expand...
Click to collapse
thx, i'll try to find that rom, i already tried my sim on another devices, and works flawless
so... after long searchs and alot of re-bricks, i finally managed to instal an ENG rom, and had found some NVRAM and NVDATA files to flash too, with those i finally made to get some signal, but still my IMEIs is unknown when i get to about phone, and when i type *#06# i get nothing, not even 0000's. now how do i update from eng rom to a more updated version of miui without losing those configuration files
MTK IMEI Repair Tool Download (All Version) Updated 2022 | Mi Account Guide
When you have an MKT Android device, you can use an MTK IMEI Tool to flash or repair IMEI on your device. In order to make your damaged device functional
miaccountguide.com
i found this tool... maybe should work. but u had to test by yourself... this website have other utility that u could try. but now u have signal? data mobile?
wetito said:
MTK IMEI Repair Tool Download (All Version) Updated 2022 | Mi Account Guide
When you have an MKT Android device, you can use an MTK IMEI Tool to flash or repair IMEI on your device. In order to make your damaged device functional
miaccountguide.com
i found this tool... maybe should work. but u had to test by yourself... this website have other utility that u could try. but now u have signal? data mobile?
Click to expand...
Click to collapse
in mtk without box/server patch only sim 2 repair
Yonecloud said:
so... after long searchs and alot of re-bricks, i finally managed to instal an ENG rom, and had found some NVRAM and NVDATA files to flash too, with those i finally made to get some signal, but still my IMEIs is unknown when i get to about phone, and when i type *#06# i get nothing, not even 0000's. now how do i update from eng rom to a more updated version of miui without losing those configuration files
Click to expand...
Click to collapse
not work nv data/ram with out patch firmware ect,you only can return imei 2 for original.
shinobusensui said:
not work nv data/ram with out patch firmware ect,you only can return imei 2 for original.
Click to expand...
Click to collapse
U tryed put SIM on slot 2 with imei2 restored? Coul be a solution? Could u post a screenshot of phone information? (Tap 4 time internal storage
wetito said:
U tryed put SIM on slot 2 with imei2 restored? Coul be a solution? Could u post a screenshot of phone information? (Tap 4 time internal storage
Click to expand...
Click to collapse
its only information and you can use Maui Meta in Meta mode if you enter edl/testpoint, for me the first time lost two imei only return The Second imei, but send to waranty and change the Phone.
of coursed use a Semi Profesional Tools.
Did you find a fix? And where did you go wrong? Please let us know the mistakes you made so that we don't.
shinobusensui said:
its only information and you can use Maui Meta in Meta mode if you enter edl/testpoint, for me the first time lost two imei only return The Second imei, but send to waranty and change the Phone.
of coursed use a Semi Profesional Tools.
Click to expand...
Click to collapse
ok, so at least one of yours sims work. goog luck
Yonecloud said:
so... after long searchs and alot of re-bricks, i finally managed to instal an ENG rom, and had found some NVRAM and NVDATA files to flash too, with those i finally made to get some signal, but still my IMEIs is unknown when i get to about phone, and when i type *#06# i get nothing, not even 0000's. now how do i update from eng rom to a more updated version of miui without losing those configuration files
Click to expand...
Click to collapse
can i ask where did you get the eng rom?