Hey guys,
I was using Limonchelo mod so far, and thought I'd swap to VIBE 3.5 (downloaded and tried installing it from here needrom, soryr if this is considered advertising, but I'm really not advertising them at all).
Ok, so anyhow, there was a recovery file, which I had to put into TWRP/Backup, and a boot.img file, which I had to flash.
Somehow, I flashed boot.img in Recovery partition as well, and now I can't boot TWRP, nor will the Android itself boot.
So practically, have 4 partitions, out of which, 2 of them (Boot & Recovery) have this boot.img flashed upon, which appearently, doesn't work! While trying to boot my phone, it remains STUCK at the lenovo - powered by android screen.
So, in short:
- Android doesn't boot (infinite loop at lenovo screen)
- Flashed the boot.img which doesn't boot over Recovery, so TWRP won't boot neither (same thing as above happens)
I could follow some guide and perhaps unbrick my phone with it, but I wouldn't like to **** things up further, and rather hear the opinion of a person that has more experience than me.
I would require some assistance with this matter, if anyone has done something similar or stupid like me before , I'd appreciate the help! xD
Thanks in advance!
Can you access fastboot mode?
When yes: Try to install the recovery: fastboot flash recovery recovery.IMG
And install Boot: fastboot flash Boot Boot.img
hey,
thanks for your reply, I wasn't able to access anything at all, however, I've fixed it using SP flash tool, dl-d some random firmware and just installed it, luckily it worked, so if anyone does sth as stupid as I did, this'll save ya. there's also a guide on YouTube for it.
Related
Goodday everyone,
Last year I soft-bricked(stucked at bootloop) my phone and I was trying to get it done. I tried all the method I saw online but none worked until I discovered one method that worked.
THE METHOD
--------------
First of all I downloaded a custom rom(NokDroid v1.1) from xda. I used phil rcovery to install the rom. But after this the Nokia logo just get stuck without it booting fully, only my recovery mode was accessible, I thought to myself since I have changed the ROM, probably it might be that the bootloader image is corrupt so I used a trick to boot into my phone. what I did was this:
1.After somethings I did, I unknowingly made my phone to boot straight to my recovery without me using any button combination and I didn't know what happen to my bootloader
2.Discovery this I renamed a bootloader image I found in NokDroidv1.1 system.zip folder to recovery.img and push the bootloader image into my phone to replace my recovery using fastboot.
In summary, I replaced my recovery With NokDroid bootloader image.
And whoa..... it worked, I boot into my phone but my problem now is that i have no recovery and if i needed it I would have to boot it in back and by doing this I would have no booloader.
So my question is:
*. Has anyone tried this method before.? (Did I invent this method?)
*. Secondly is there anyway I can get my phone to have both bootloader and recovery?
*.Why did my phone boot straight to recovery?
Hi,
I'm having a bit of trouble. I had a brand new Redmi 4X, and I was advised to install TWRP, root it, and install the Xiaomi.eu rom until LineageOS is released. I unlocked the bootloader, flashed TWRP, managed to get into it once and now I can't do it again. When TWRP loaded it asked me for a password for decryption but it let me just skip it it seems (not sure if that is the problem) but now I can't boot normally, I can't boot into recovery, but fastboot seems to work okay. How do I go about fixing this?
I've tried reflashing TWRP but I still can't get to it, and I don't really know enough about this stuff to know where I've gone wrong.
UPDATE - I think this is to do with dm-verity and having the stock kernel installed. Now it's too late to undo what I've already done, so I hope to god that someone knows how to fix this.
UPDATE - Right, the problem is solved I think. I had to do an awful lot of googling, and I'm not entirely sure what it was specifically that fixed it. But I found a guide that taught me the fastboot command "fastboot boot twrp.img" which saved the day. Even when my phone wouldn't let me into recovery, it allowed me to flash a no-verity.zip which i think is what allowed me to boot, and it allowed me to flash superSU.zip and then the ROM I was aiming for. And now I've booted into the ROM successfully and hopefully I am rooted and all is well. Plus I can access TWRP as normal now.
Any help would be greatly appreciated
Can you boot into TWRP by pressing the buttons so that you boot directly to TWRP??
Have you tried Command Prompt to boot with commands in to recovery??
And if you get into TWRP you should have everything on the SDCard and then just
format all things except SDCard and then flash from SDCard everything
That is what I would try..and yes it ask for a password but just skip it to get to it
If you can get into TWRP to flash from SDCard then you good to go..if not
Google all the commands for CMD..and plug your phone to the PC and flash everything with the
commands.....
Let us know what is working and what not and what steps exectly you are doing
EDIT
Turn off your device > Press and hold “Power” and “Volume +” buttons at the same time.
After short vibration signal release the power button and wait for TWRP to start.
To boot in stock recovery open “Update” app.
In the setting select “Boot in recovery”.
brljak83 said:
Can you boot into TWRP by pressing the buttons so that you boot directly to TWRP??
Have you tried Command Prompt to boot with commands in to recovery??
And if you get into TWRP you should have everything on the SDCard and then just
format all things except SDCard and then flash from SDCard everything
That is what I would try..and yes it ask for a password but just skip it to get to it
If you can get into TWRP to flash from SDCard then you good to go..if not
Google all the commands for CMD..and plug your phone to the PC and flash everything with the
commands.....
Let us know what is working and what not and what steps exectly you are doing
EDIT
Turn off your device > Press and hold “Power” and “Volume +” buttons at the same time.
After short vibration signal release the power button and wait for TWRP to start.
To boot in stock recovery open “Update” app.
In the setting select “Boot in recovery”.
Click to expand...
Click to collapse
Thanks for the reply. I can't get into TWRP. Even if I could get into TWRP how would I get files on the phone to flash them?
Is it possible to flash any rom from the pc directly and if it is will this possibly help? I think it's not booting because the kernel is still stock.
I'm not sure what you mean in the edit, how do I boot into stock recovery without being able to boot the phone (and when I have already flashed TWRP)?
brokemyG2 said:
Thanks for the reply. I can't get into TWRP. Even if I could get into TWRP how would I get files on the phone to flash them?
Is it possible to flash any rom from the pc directly and if it is will this possibly help? I think it's not booting because the kernel is still stock.
I'm not sure what you mean in the edit, how do I boot into stock recovery without being able to boot the phone (and when I have already flashed TWRP)?
Click to expand...
Click to collapse
Hii
I just have been reading about this bootloop
Go over here and read all of the 6 pages..will not take much time but could help you out much
https://forum.xda-developers.com/xiaomi-redmi-4x/development/official-twrp-3-2-1-0-xiaomi-redmi-4x-t3718217
Hey, I have exactly the same problem. Latest stock rom, flashed twrp in fastboot and got into the boot loop. Nothing works. I can only enter fastboot. What exactly did you do then? What is this no-verity.zip? I can't find anything about it.
I had a problem
I unlocked bootloader then installed redwolf recovery and took a nandroid backup. After that i rebooted to system but stuck into bootloop, could not boot to recovery, could not boot into system, So the only thing worked was that i flashed fastboot rom with mi flasher. And syccessfully rebooted to system with bootloader locked and stock recovery. So, if anyone have same problem you can do the same. How do i install recovery safely again? Should i use TWRP only? Should i flash v3.1.0 with lazy flasher or v3.2 directly without lazy flasher? I don't want to stuck into bootloader again, have to get all data deleted.
I tried to unlock bootloader and installing the twrp in micromax bharat 4. Unlocking was success and then i installed twrp using 'fastboot flash recovery twrp.img'. then i tried flashing magisk on to it. There i made a mistake in the code. I used 'fastboot flash recovery \magisk_patched.img' instead of 'fastboot flash boot \magisk_patched.img'. all the process are showed as succeasfully completed. After that when i reboot the phone, it was stuck at 'powered by android' screen. It is not showing any logos or anything. I also cant access bootloader or fastboot mode.
Anyone please help!
Thanks in advance.
A bad flash to the recovery partition should normally not mess up the bootloader (which is fastboot mode, same thing). To get everything back up and running again you'd have to be able to enter the bootloader though, so you're going to have to figure that one out.
There's a pretty active Bharat 4 thread here that might be a good place to ask for help:
https://forum.xda-developers.com/an...p-root-micromax-bharat-4-q440-cg-sky-t4001911
Thanks for the help. I read the entire forum but didnt find the relevant solution for me. The problem is that i cannot access the fastboot mode micromax bharat 4
Hello guys!
Yesterday I tried to flash the newest Lineage-built to my new G7+ (XT1965-3, bought in Germany via Amazon), but something went wrong and now I'm afraid, I bricked my phone.
It's not my first flash of Lineage, as I did this in the past already on some older Phones (SII, SIII, S5), but it's the first time, that I have a major issue.
So I followed all the steps on the Lineage-Wiki (on Win10).
After flashing the recovery (the lineage-recovery, not TWRP) I wasn't able to enter the recovery-mode, so the phone booted to StockRom. And probably this was the problem: As it didn't react to VolumeDown+Power, I reflashed the recovery a second time. After that the touch-screen is not working any more.
I am able to enter the recovery-mode and I can boot to Stock-Rom, but in both modes the phone does not react to touch, so I can only use the Volume- and Power-Buttons.
Probably I made more mistakes after that: I thought, that a factory-reset would help, but It didn't. I also relocked the bootloader, but as I saw, that it also did not bring any solution, I unlocked it a second time.
Conclusion: I have a brand new phone, with lineage-recovery, an unlocked bootloader but without touch working.
I also tried to flash Lineage, but the sideload got stuck at 47%. So Lineage is not installed and it boots into Stock, where I can not get any further without touch.
Has anyone any idea, what could be the issue and how I can fix it? I would like to start from scratch, but I don't know, what is the exact problem and if i can for example return to stock recovery.
Thank you!
---- EDIT ----
If it helps: I am able to boot TWRP via "fastboot boot twrp-xxx.img". And in TWRP the touch works!
I could flash lineage directly via TWRP from external sd-card, but i am afraid that after that I won't be able to return if something goes wron.
probably your best bet is to go right back to stock using the LMSA tool and starting fresh. I've seen others encounter similar issues on different devices and always the cleaneast solution was just to role back everything and start over.
Thank you so much. With LMSA I managed to restore everything to stock and touch is working!
So I'm going to start from scratch and finally install Lineage.
Is is indicated to use the Lineage-Recovery, as the Lineage-Wiki says, or would it better to use TWRP?
TWRP gives me the option to flash from sd-card, which seems to me better than via sideload.
joglxv said:
Thank you so much. With LMSA I managed to restore everything to stock and touch is working!
So I'm going to start from scratch and finally install Lineage.
Is is indicated to use the Lineage-Recovery, as the Lineage-Wiki says, or would it better to use TWRP?
TWRP gives me the option to flash from sd-card, which seems to me better than via sideload.
Click to expand...
Click to collapse
Glad your back up and running. Take a look in the lineage thread, but it does appear most people lean towards using twrp, shouldnt have an issue with either however.
digitaljeff said:
Glad your back up and running. Take a look in the lineage thread, but it does appear most people lean towards using twrp, shouldnt have an issue with either however.
Click to expand...
Click to collapse
I'm having a similar problem. At first touch was fubar but I was able to return to stock using LMSA and now touch works. I can load TWRP with fastboot and even install a custom ROM and TWRP, but installing any custom ROM results in a boot loop during the finding and installing updates part of the phone setup during first boot. I'm tried Evolution X which I was running previously(for about a month, and then a boot loop started yesterday), PixelOS 10, and AncientOS, but all result in the boot loop on first boot after connecting to wifi.
Fixed
I fixed this somehow by manually flashing the latest stock firmware to slot a, and then extracting the evolution x Rom and manually extracting the IMG files inside and manually fastboot flashing those to slot b. I then set b as the active slot and booted up, patched the boot image with magisk, flashed that, and everything works. Not sure why twrp wouldn't do the trick.
Finally had the time to install Lineage. Now everything works.
I followed the instructions someone posted in the [ROM][OFFICIAL] LineageOS 17.1 [nightlies]-thread and the instructions of the lineage-wiki:
1. fastboot boot TWRP
2. sideload the copy-partitions.zip from lineage-wiki
3. factory reset via TWRP (wipe cache, dalvik and data)
4. sideload lineage
5. reboot bootloader
6. fastboot boot TWRP
7. sideload magisk
8. reboot system
Had a little bootloop the first time rebooting the system, but that was because I forgot to wipe data-partition in step 3. Wiping data and rebooting did it for me.
So I have a working Lineage17.1 with root via Magisk.
Thank you for the help!
I had exactly the same problem like you had. Bought a brand new moto g7 plus and after recovery flash, Touchscreen was not working anymore. I could manage to go back to the bootloader, sideloaded TWRP, but side loading lineage worked for me then. It seemed to be stuck on 47 percent, but this seems to be a normal issue, the file was there and after installing, touchscreen worked normally.
My phone keeps getting stuck on fastboot mode.
I'll flash the standard MIUI ROM using the MiFlash Tool, then I flash a custom recovery and a custom ROM(EvolutionX in this case), everything works and I can set up my phone, but as soon as I reboot I can no longer boot into android or recovery. i've tried flashing multiple recoveries using fastboot and straight up booting a recovery using "fastboot boot recovery.img" but it still always go to fastboot. The only solution is to start the process all over again, and obviously that's just not an option since I can never turn my phone off after that.
Any tips?
I think I got it solved, at least I got it to reboot into Android and TWRP.
I used this guide, but I'll write the steps I took here in case you're having the same issue. I wound up using xiaomi.eu MIUI rom, but it shouldn't matter what you use, I'll assume you're stuck in fastboot.
Do "fastboot flash vendor vendor.img", you get this vendor.img from the fastboot version of the official MIUI ROM, after you decompress the .tar.gz it should be in the "images" folder
Do "fastboot flash recovery twrp.img" then "fastboot boot twrp.img", this should flash twrp as your recovery and then boot into it, for some reason it only worked with the official twrp, not orange fox.
Assuming you got into TWRP you should now flash the latest firmware(I got mine from xiaomifirmwareupdater.com) make sure you download just the firmware not the entire rom, mine was named something like fw_raphael_miui... .zip
Format data (not wipe, format, it's a separate option in TWRP), it should ask you to type yes, so do that.
Flash whatever ROM you want
Hopefully this helps you, I hate finding forum posts marked "solved" but with no instructions. I also tried the "vbmeta_dv_shivsom.img" method some threads mentioned but it didn't work
Here's a pastebin of the guide I used in case the original link goes down
You can get all the files I mentioned from xiaomifirmwareupdater.com and the official TWRP site
Out of all that, the one instruction that solves it is the format data step. This is the magic step required. You always need to do this when flashing over MIUI.
Flashing vendor was totally irrelevant.
This will tell you what you need to do.
Simple Guide to flashing successfully
Here's a quick guide to some of the basics. Which recovery. ---------------------------- Use the latest from here. https://forum.xda-developers.com/k20-pro/development/recovery-unofficial-twrp-xiaomi-redmi-t3944363/post79823568 Do not use Orange...
forum.xda-developers.com
Thanks a lot man! I'm having this issue and it is beyond annoying. I've lost so much time with this BS.
Edit: Does not help actually
I just had the same problem with my Lamentablet.
I was trying stuff up and restarted it in fastboot mode and got stuck there.
So, ways to deal with it:
adb reboot recovery
rebooted the tablet in recovery mode. All I had then was to press the power button to activate Reboot. Solved! From now on it boots normally.
Meanwhile I had discovered that by typing
fasboot continue
the tablet would resume, but at the next reboot cycle, power down + up cycle or reboot after a crash, the tablet would reboot into fastboot mode...
And I found this out when it crashed (it's not called a Lamentablet for nothing!).
Luckily I had a PC with Linux around. It didn't have the software installed but drivers were already in the Kernel and installing adb and fastboot was a matter of mere seconds. If I didn't have an easily ready PC at hand, this tablet would have become a brick until plugged in and rebooted...
OMG Thanks dude.... I'm literally working to installing custom rom on redmi 7a from stock rom but I don't know what reason that make my phone always stuck on fastboot when format data, before this was fine.
Osga21 said:
I think I got it solved, at least I got it to reboot into Android and TWRP.
I used this guide, but I'll write the steps I took here in case you're having the same issue. I wound up using xiaomi.eu MIUI rom, but it shouldn't matter what you use, I'll assume you're stuck in fastboot.
Do "fastboot flash vendor vendor.img", you get this vendor.img from the fastboot version of the official MIUI ROM, after you decompress the .tar.gz it should be in the "images" folder
Do "fastboot flash recovery twrp.img" then "fastboot boot twrp.img", this should flash twrp as your recovery and then boot into it, for some reason it only worked with the official twrp, not orange fox.
Assuming you got into TWRP you should now flash the latest firmware(I got mine from xiaomifirmwareupdater.com) make sure you download just the firmware not the entire rom, mine was named something like fw_raphael_miui... .zip
Format data (not wipe, format, it's a separate option in TWRP), it should ask you to type yes, so do that.
Flash whatever ROM you want
Hopefully this helps you, I hate finding forum posts marked "solved" but with no instructions. I also tried the "vbmeta_dv_shivsom.img" method some threads mentioned but it didn't work
Here's a pastebin of the guide I used in case the original link goes down
You can get all the files I mentioned from xiaomifirmwareupdater.com and the official TWRP site
Click to expand...
Click to collapse
thanks bro. flashing vendor after a format from twrp did the good