Database Develop

[how-to] erase partition table of redmi 2/prime/2a....

I AM NOT RESPONSIBLE FOR BRICKED DEVICES, DEAD SD CARDS,
THERMONUCLEAR WAR.YOU ARE CHOOSING TO MAKE THESE MODIFICATIONS, AND IF
YOU POINT THE FINGER AT ME FOR MESSING UP YOUR DEVICE, I WILL LAUGH AT YOU. HARD. A LOT.
THIS GUIDE WILL HELP YOU TO ERASE PARTITION TABLE AND RESTORE STOCK PARTITION TABLE OF REDMI 2.
IF YOU MESSED UP WITH YOUR PHONE PARTITION TABLE, OR SOMETHING ELSE.
THIS WILL REWRITE THE WHOLE PARTITION TABLE FOR YOUR PHONE RATHER SIMPLY FLASHING THE PARTITIONS.
REQUIRMENTS:
1.) REDMI 2 (ANY VARIANT) CHARGED ABOVE 75%.
2.) A WINDOWS PC.
3.) MI FLASH TOOL AND GET IT INSTALLED. ---> http://en.miui.com/thread-339517-1-1.html
ALTERNATE MI FLASH TOOL IF YOUR DEVICE IS NOT DETECTED AFTER RUNNING .BAT FILE--> https://1drv.ms/u/s!AjRyVY8i_bd1nURHfzNelaEUosue
4.) MI FASTBOOT ROM DOWNLOAD AND EXTRACT IT. ---> http://en.miui.com/forum.php?mod=viewthread&tid=439829
(I RECOMMEND 1 GB VARIANTS OWNER TO DOWNLOAD REDMI 2 PRIME FASTBOOT ROM.)
5.) ERASE_PARTITION_TABLE.zip FROM ATTACHMENTS.
PROCEDURE:
1.) DOWNLOAD AND EXTRACT ERASE_PARTITION_TABLE.zip
2.) CONNECT YOUR DEVICE TO PC IN FASTBOOT MODE.
3.) RUN .BAT FILE FROM ERASE_PARTITION_TABLE.zip
4.) A DIALOG FROM WINDOWS WILL APPEAR TO FORMAT DRIVE. JUST CLICK CANCEL.
5.)YOU PHONE SCREEN WILL BE BLACK. DONT PULL OUT USB CABLE.
6.)RUN MI FLASH TOOL AND FLASH DOWNLOADED REDMI 2 PRIME FASTBOOT ROM USING FLASH_ALL.BAT
7.) AFTER 5-10 MINS YOUR PHONE WILL BOOT INTO MIUI ROM.
8.) TO USE CUSTOM ROM FLASH APPROPRIATE CUSTOM RECCOVERY AND ROM.
HOPE THIS FIXES ALL ISSEUES RELATED TO MODEL NUMBER CHANGE,VO-LTE, etc,etc,etc.

Simply reserved.

It hard bricked my phone, not showing in miflash and can't go into recovery or fastboot mode. Only showing as Local Disk G in pc

Bhargab Deka said:
It hard bricked my phone, not showing in miflash and can't go into recovery or fastboot mode. Only showing as Local Disk G in pc
Click to expand...
Click to collapse
Does it show as HS Q loader something?

aashishdamrait said:
Does it show as HS Q loader something?
Click to expand...
Click to collapse
Its showing qualcomm hs usb diagnostics 9006 (com11) in device manager -ports

it happened here too, what should I do????
---------- Post added at 16:46 ---------- Previous post was at 16:17 ----------
@aashishdamrait I was scared as **** bro, my device was black and 23 disk partitions opened in the windows, but I managed to revive the device by using the other mi flash, that was scary as hell

@TecnoTailsPlays
Now, I hope phone is working fine?

aashishdamrait said:
@TecnoTailsPlays
Now, I hope phone is working fine?
Click to expand...
Click to collapse
Yep, back to normal state

@TecnoTailsPlays
Did this fixed random reboots for you?

aashishdamrait said:
@TecnoTailsPlays
Did this fixed random reboots for you?
Click to expand...
Click to collapse
Nope

ASK a senior member
I have to problem with flashing xiaomi redmi 2 prime HM2014813 as a notifcation unspecified error( 0×80004005) failed ( remote : failed to write partition)
Please help me a lord
How can it fixed flashing xiaomi redmi 2 prime hm2014813?
Sent from my SM-J500G using Tapatalk

IAM_COOL49 said:
ASK a senior member
I have to problem with flashing xiaomi redmi 2 prime HM2014813 as a notifcation unspecified error( 0×80004005) failed ( remote : failed to write partition)
Click to expand...
Click to collapse
Kindly Send the Screenshots.
do tell me about the Mi flash tool you are using , rom and and.

aashishdamrait said:
Kindly Send the Screenshots.
do tell me about the Mi flash tool you are using , rom and and.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Run "erase_partition_table.bat" again.
do verify you have selected all the files under browse category like patch.xml.

Okay i'm trying flash using erase partition a lord

I messed up with my mi3w
can I use it on my mi3w? Will it work ?

it works. thanks for the guide I have Redmi 2 Pro wt88047.

aashishdamrait said:
Run "erase_partition_table.bat" again.
do verify you have selected all the files under browse category like patch.xml.
Click to expand...
Click to collapse
Hey, I have a problem with my Redmi 2 version 2014813 and I can only access TWRP, whenever I try to flash any compatible ROM I get the errors I attached in the picture.
Also when I try to flash via fastboot it fails --> fastboot flash partition gpt_both0.bin --> FAILED to write partition
Any idea how to try to fix this? You think your scrip for the partition table can help?

Adi59 said:
Hey, I have a problem with my Redmi 2 version 2014813 and I can only access TWRP, whenever I try to flash any compatible ROM I get the errors I attached in the picture.
Also when I try to flash via fastboot it fails --> fastboot flash partition gpt_both0.bin --> FAILED to write partition
Any idea how to try to fix this? You think your scrip for the partition table can help?
Click to expand...
Click to collapse
Same here. Did you find a solution ?

oferyuval said:
Same here. Did you find a solution ?
Click to expand...
Click to collapse
I tried many different ways to flash any ROM into it without any success. I read somewhere in the miui eu forums that the redmi2 pro had a stupid software update that was not meant for one type of emmc and broke it. Someone who contacted the Chinese support got his/her phone swapped or money back.
I still have the phone in same condition hoping to manage one day to replace the emmc chip. I think that will fix the issue.
EDIT: original post:
"Bad news - Redmi 2 the series 2014813 has faulty NAND memory. After 1 to 1.5 year of operation the memory dies. First warning is "App stopped working" message. Then the phone dies and after rebooting you see just the Mi logo.
Flashing new ROM usualy fixes this problem and phone works for 1-2 months without problems. Then the fault apears again and it is end for the phone. You can enter fastboot mode, TWRP, but there is no was how to write any data to internal memory. Fastboot, TWRP nor MiFlash do not work because this is a hardware problem. The only way is replacing NAND memory, but this is extremely complicated task." source: http://en.miui.com/thread-268891-3-1.html
EDIT2: check this thread also: https://forum.xda-developers.com/android/help/how-to-boot-sd-card-qmobile-z8-bricked-t3712171

Lenovo a7000-a won't boot & can't enter to recovery

Hello, i have spartphone Lenovo a7000-a, with TWRP Recovery and custom rom "Resurrection remix". When i wanted to update rom to newer version, mobile stuck on booting, and he falled to endless restarting. I can't enter to recovery, i can't do anything with mobile.
i used smart phone flash tool, with stock rom, but tool can't find my mobile.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Mobile stuck on this screen, and sometimes restarts and again stuck on this screen.
i hope that anybody can help me, I don't know what else to do. Many thanks for helping

Firstly, install mediatek vcom drivers, don't use the add hardware option in device manager. Right click proper .inf file in explorer and click install, click continue with the installation on the warning prompt. If you are on Windows 8/8.1/10 search for how to install unsigned drivers and do the same. Then download the twrp package from this forum. It should have boot.img and recovery.img . Install with sp flash tool, select the scatter file from the folder and make sure both boot and recovery are ticked. Go to options ->download and make sure both checksums are ticked. SP flash tool dropdown menu should show download only. Click download/start/whatever and connect powered off phone with a good data cable. Flash should start and it'll finish soon. Now disconnect data cable, press both volume buttons firmly and press power button. Don't let go unless you see a Lenovo logo. It should boot into TWRP. You custom ROM may not boot but now you have TWRP.
Edit: Here is the TWRP link http://forum.xda-developers.com/lenovo-a7000/development/twrp-recovery-lenovo-a7000-mm-t3358436. Do NOT untick boot.img. If you can't get to recovery you must flash boot.img as well

fingerwarrior said:
Firstly, install mediatek vcom drivers, don't use the add hardware option in device manager. Right click proper .inf file in explorer and click install, click continue with the installation on the warning prompt. If you are on Windows 8/8.1/10 search for how to install unsigned drivers and do the same. Then download the twrp package from this forum. It should have boot.img and recovery.img . Install with sp flash tool, select the scatter file from the folder and make sure both boot and recovery are ticked. Go to options ->download and make sure both checksums are ticked. SP flash tool dropdown menu should show download only. Click download/start/whatever and connect powered off phone with a good data cable. Flash should start and it'll finish soon. Now disconnect data cable, press both volume buttons firmly and press power button. Don't let go unless you see a Lenovo logo. It should boot into TWRP. You custom ROM may not boot but now you have TWRP.
Edit: Here is the TWRP link http://forum.xda-developers.com/lenovo-a7000/development/twrp-recovery-lenovo-a7000-mm-t3358436. Do NOT untick boot.img. If you can't get to recovery you must flash boot.img as well
Click to expand...
Click to collapse
Hi i tried your way, but i got error error.
here is how i proceeded:
where i made a mistake?

There are two possibilities here,
1. Your phone is not really A7000, rather it is A7000 plus or turbo
2. The installed partitions are different enough that SP Flash tool refuses to flash it.
You can try to flash the stock rom S228 if you are sure it is lenovo A7000. If it again throws out same error and you are perfectly SURE it is lenovo a7000, you can try to format first and then flash the rom, although it is not recommended.

fingerwarrior said:
There are two possibilities here,
1. Your phone is not really A7000, rather it is A7000 plus or turbo
2. The installed partitions are different enough that SP Flash tool refuses to flash it.
You can try to flash the stock rom S228 if you are sure it is lenovo A7000. If it again throws out same error and you are perfectly SURE it is lenovo a7000, you can try to format first and then flash the rom, although it is not recommended.
Click to expand...
Click to collapse
1.) I have lenovo a7000-a
2.) I also tried a7000-a stock firmware, but when i downloaded it via SPFlashTool, downloading stuck at Download DA 100% and then i get timeout.
EDIT:
it seems that, mobile is soft-bricked, without recovery.
But i can enter to META mode & FACTORY mode. I can Flash (via SPFlashTool) but it stucks at Download DA 100% (on red line).
Downloading stuck on this screen and then i get Timeout.

Powering said:
1.) I have lenovo a7000-a
2.) I also tried a7000-a stock firmware, but when i downloaded it via SPFlashTool, downloading stuck at Download DA 100% and then i get timeout.
EDIT:
it seems that, mobile is soft-bricked, without recovery.
But i can enter to META mode & FACTORY mode. I can Flash (via SPFlashTool) but it stucks at Download DA 100% (on red line).
Downloading stuck on this screen and then i get Timeout.
Click to expand...
Click to collapse
I also have Lenovo a7000-a. Tried flashing stocks roms (as per other thread) as stock ROM but still gets grey screen and white lines.
What ROM build number are you using. Can you share the link?
I just want to revert back to original (stock) ROM and make it work again.
Sent from my Pixel XL using Tapatalk
---------- Post added at 01:03 PM ---------- Previous post was at 01:02 PM ----------
fingerwarrior said:
There are two possibilities here,
1. Your phone is not really A7000, rather it is A7000 plus or turbo
2. The installed partitions are different enough that SP Flash tool refuses to flash it.
You can try to flash the stock rom S228 if you are sure it is lenovo A7000. If it again throws out same error and you are perfectly SURE it is lenovo a7000, you can try to format first and then flash the rom, although it is not recommended.
Click to expand...
Click to collapse
What's the stock ROM for Lenovo a7000-a? I have grey screen and white lines.
Sent from my Pixel XL using Tapatalk

Bro i advise you to follow the below link and download the stock rom again and flash it again by spflashtool
And follow every step as mentioned in the below link
http://forum.xda-developers.com/lenovo-a7000/development/flashing-stock-rom-via-sp-flash-t3364235

PrashantRana said:
Bro i advise you to follow the below link and download the stock rom again and flash it again by spflashtool
And follow every step as mentioned in the below link
http://forum.xda-developers.com/lenovo-a7000/development/flashing-stock-rom-via-sp-flash-t3364235
Click to expand...
Click to collapse
I tried this, but process stucks at "Download flash 0%" (yellow bar)

Powering said:
I tried this, but process stucks at "Download flash 0%" (yellow bar)
Click to expand...
Click to collapse
as your download is not starting so it may be possible that driver are not correctly installed

( Xiaomi Mi Mix can not enter recovery mode or fastboot mode no LED light) any hope !

hello there
i have Xiaomi Mi Mix 256gb +6gb ram , the full story in summary is that :
the phone before the issue was on global official rom Version: V8.2.1.0.MAHMIDL (MIUI8)
the phone is bootloader unlocked with no root and on official xiaomi recovery
unfortunately yesterday i try to install new recovery in order to get a root and full permission on this device and to over take the restricted mi ui system
So through minimal adb tools i successfully flash this recovery twrp-3.0.2-0 by MrRaines_from here and there flash this root (SR3-SuperSU-v2.79-SR3) at that time evey think was ok i reboot my device and get full acecss to my device through superuser apps
then i install this apps from google play ( Sytem app remover from here )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and i get root access then try to remove the securty system apps ! ( due to it is restrict installing apps from usb mode and every time is ask for permission to install apps and i want to install bulk of apps in same time so it is so annoying to click the install permission on the device !! )
after that the device is do alof of lag and boot lop so i try to enter recovery mode again and make a full factory reset ( by using wipe option in twrp-3.0.2-0 recovery )
i do full reset but did not know whey the phone state that you have no system os in the device !
so i try to flash a rar official global rom through usb-c flash memory ! but every time it state error flashing
so i try to install rom through PC by intering fatboot mode and using mi flash tools ( using global flashboot rom from here
with no any hope and again error statment
so i try to flash the rom in recovey mode through offical mi pc suite also no hope , i try to flash official mi recovey thinking that will solve the issue of flashing offical rom through PC
so i flash the official recovery
i try to flash the official rom through pc - mi flash 2016 ( in fastboot mode ) with no hope
then try to flash official global rom through pc ( mi recovery mode ) in English mi pc suite with no hope
then try to flash official global rom through pc ( mi recovery mode ) in Chinese mi pc suite from here with no hope
but if mistakely flash this file ( get it from so friends that try to solve the issue as he said it will solve the fastboot and recovery flashing ! )
mione_plus_images_4.12.5_4.1_cn_c82d90f6ee from here or this https://nofantz.blogspot.co.id/2016/08/firmware-xiaomi-fastboot-mode.html
try it in offical xiaomi recovery mode through chinese mi pc suite and it accept flashing ! then it nere accept to flash any rom !
and i retry all previous step with no any hope to solve the issue !
so i try to do last choice by enter fastboot mode again and re install costume recovery and flash a costume rom like EpicROMGlobal_V8.2.1.0._MrRaines_MrTomatico_v1.0
but unconditionally when i try to do that ( entering fastbood mode ) the device is look like to be turnd off with no any response ! just black screen and no any sign of normal working i can not enter recovery mode again can not enter fastboot again !! try to connect to charging no LED light !
try to connect to PC it just appear that the device is recognized by pc by hearing a sound of usb flash connection ( as a routine sound like u connect any usb device ) !
then a driver is installed it was Qualcomm_USB_Driver
and the device in just black screen appearance
if i try to flash through mi flash program it identify the device as
and the string think is that when i connect the device through Wondershare MobileGo it identfy the device as this name Vestel VSP 355g ! ( before the issue in normal state the program identify the phone as it name mi mix but in this state never ! )
now the phone is in black screen state with no any response
no LED light when try to charging or connect to pc
no recovey mode
no fastboot mode
can not flash it through MI pc suite ( chinses of english version )
can not flash through Mi flash
can not identified by Mininmal adb tools
jut i hear the sound when i connect the device to PC or pressing the power button or power bottom and volume key
Now is there any hope to get the phone back to normal state or it is totally hardware dead phone

thanks for god i try this last chance to save my phone
my phone is like that same video issue with changing device !
try this tip to Disable Driver Signature in windows 10
then i flash the fastboot rom via mi flash 2016 ( chinese rom the only one which can solve the issue )
now i finaly can get into fastboot mode
but the recovery mode is strange it is in Chinese languages mi recovery v 3.0
i will update the result when i get full functioning phone

Finally now my phone is fully functioning and i am in the offical global rom V 8.2.1
Thanks to god
It is solved

medicalman said:
Finally now my phone is fully functioning and i am in the offical global rom V 8.2.1
Thanks to god
It is solved
Click to expand...
Click to collapse
I see the post now but I'm glad that you solve the issue

egentreri said:
I see the post now but I'm glad that you solve the issue
Click to expand...
Click to collapse
thnx for u
it is to frustrated when you loss you phone
and i am so happy that i can solve the issue by my self without needing to send the phone back to the main company or replacing any part of it !

medicalman said:
thanks for god i try this last chance to save my phone
my phone is like that same video issue with changing device !
https://www.youtube.com/watch?v=https://www.youtube.com/watch?v=VjEIg6ntfoY&index=54&list=WL&t=190s
try this tip to Disable Driver Signature in windows 10
https://www.youtube.com/watch?v= Disable Driver Signature
then i flash the fastboot rom via mi flash 2016 ( chinese rom the only one which can solve the issue )
now i finaly can get into fastboot mode
but the recovery mode is strange it is in Chinese languages mi recovery v 3.0
i will update the result when i get full functioning phone
Click to expand...
Click to collapse
That's just official recovery, glad you sorted it

How long did it take to flash under XiaoMiFlash with global fastboot stable or other? My phone has been flashing since 25 min and still there is no end.

gszych said:
How long did it take to flash under XiaoMiFlash with global fastboot stable or other? My phone has been flashing since 25 min and still there is no end.
Click to expand...
Click to collapse
That's not right

[RECOVERY] TWRP 3.3.1 Lenovo Z6 Pro

DISCLAIMER
As usual, you do anything described in this post at your own risk. No one but you is responsible for any data loss, bricking or damage of your device.
INSTALLATION:
Pre-Requirements
ADB means Android Debug Bridge, and it is software that you should always do have installed on your PC.
Pre-Requisite 1
Make sure that you have the drivers for your phone installed on your PC.
If not, you can download and install them from here
Pre-Requisite 2
You must also install: Minimal ADB & Fastboot, you can download the software
from here
Pre-Requisite 3
Your device needs this with unlocked bootloader
Pre-Requisite 4
Make sure you have enabled 'USB Debugging' and OEM Unlocking on your device
Settings -> Advanced settings -> Developer Options
PAY ATTENTION: If you do not see the Developer Options menu you need to do this:
Settings -> Device Info -> tap 6 or 7 times on the 'ZUI version' entry
A pop-up should appear, telling you 'now you are a developer'
And now, how to install:
1.Reboot phone to Fastboot mode (via adb -type adb reboot bootloader)
2.Download patched vbmeta and TWRP recovery
3.Extract it to folder with minimal adb and fastboot
4.Open cmd in this folder and type fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
5.Then type fastboot reboot bootloader
6.Type fastboot flash recovery twrp_3.3.1_decrypt_works_by_alexeei.img
7.Press volume - and select Reboot recovery, then press power button
8.Enjoy
What worked:
All functions (may be if not, please say). Also TWRP now see exFAT microsd.
Thanks wzsx150 for it's TWRP for Lenovo Z5 Pro GT, some decrypt stuff taken from it.

This is f*cking awesome. Thank you for your efforts. Will install asap and bring some feedback.

Is it working ? Any custom roms then ?

Please provide custom ROM the official ROM is no less than terrible and bad.

Finally compiled TWRP with decryption support, added in first post

hammad5507 said:
Please provide custom ROM the official ROM is no less than terrible and bad.
Click to expand...
Click to collapse
There are some "globalised" china roms which are doing a decent job (with notifications sound fixed, chinese bloatware removed and google services installed), I recommend the one made by Francko76.
Also you can try all the treble stuff out there. I only tried two GSIs so far and I went back to Francko´s build.
Anyway I´m like you looking forward z6 pro dedicated custom roms.

descarao81 said:
I recommend the one made by Francko76.
Click to expand...
Click to collapse
Can you share a link to the Roms you mentioned ?
thanks

descarao81 said:
There are some "globalised" china roms which are doing a decent job (with notifications sound fixed, chinese bloatware removed and google services installed), I recommend the one made by Francko76.
Also you can try all the treble stuff out there. I only tried two GSIs so far and I went back to Francko´s build.
Anyway I´m like you looking forward z6 pro dedicated custom roms.
Click to expand...
Click to collapse
benjieb said:
Can you share a link to the Roms you mentioned ?
thanks
Click to expand...
Click to collapse
what rom is Francko´s build? if you have a link, can you share it please?

Sorry to ask, is this vbmeta patched only for this device or can i installed in others device ?

Please share the links
Please share links for the Franko's build.
and also is there any custom pie rom available??
Pls share if any.. I am very unsatisfied with the global rom. Pls help.

@alexei sir, can you make custom kernel or give way to our devices gets exfat support ?

this is twrp for Lenovo Z6 (not pro) ?

geepnozeex said:
this is twrp for Lenovo Z6 (not pro) ?
Click to expand...
Click to collapse
No this is Twrp for Z6 Pro ( L78051 )

Very tempted to get this phone... has anyone try with phh’s GSI? Does under screen scanner works?

alexeei said:
DISCLAIMER
As usual, you do anything described in this post at your own risk. No one but you is responsible for any data loss, bricking or damage of your device.
INSTALLATION:
Pre-Requirements
ADB means Android Debug Bridge, and it is software that you should always do have installed on your PC.
Pre-Requisite 1
Make sure that you have the drivers for your phone installed on your PC.
If not, you can download and install them from here
Pre-Requisite 2
You must also install: Minimal ADB & Fastboot, you can download the software
from here
Pre-Requisite 3
Your device needs this with unlocked bootloader
Pre-Requisite 4
Make sure you have enabled 'USB Debugging' and OEM Unlocking on your device
Settings -> Advanced settings -> Developer Options
PAY ATTENTION: If you do not see the Developer Options menu you need to do this:
Settings -> Device Info -> tap 6 or 7 times on the 'ZUI version' entry
A pop-up should appear, telling you 'now you are a developer'
And now, how to install:
1.Reboot phone to Fastboot mode (via adb -type adb reboot bootloader)
2.Download patched vbmeta and TWRP recovery
3.Extract it to folder with minimal adb and fastboot
4.Open cmd in this folder and type fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
5.Then type fastboot reboot bootloader
6.Type fastboot flash recovery twrp_3.3.1_decrypt_works_by_alexeei.img
7.Press volume - and select Reboot recovery, then press power button
8.Enjoy
What worked:
All functions (may be if not, please say). Also TWRP now see exFAT microsd.
Thanks wzsx150 for it's TWRP for Lenovo Z5 Pro GT, some decrypt stuff taken from it.
Click to expand...
Click to collapse
At step 4 I'm getting "fastboot: unknown option -- disable-verity"
Any idea?
Thanks

threeeye said:
At step 4 I'm getting "fastboot: unknown option -- disable-verity"
Any idea?
Thanks
Click to expand...
Click to collapse
NVM, just updated the adb tools and now everything is good

Restore stock bootloader?
Hello, I recently went through the whole process of unlocking bootloader, installing TWRP recovery and flashing ROM, and I am at version 11.0.350 ST ROW currently.
The ROM works fine, but now at every boot I am greeted by the "The boot loader is unlocked and software integrity cannot be guaranteed. <snip> Press power button to pause boot/continue" notice.
According to google, it's apparently a result of the bootloader unlocking process.
I tried to lock the bootloader again using "fastboot flashing lock", but then the phone stopped booting normally. It got stuck at the boot logo (which I believe means bricked?).
It wouldn't work until I unlocked bootloader and reflash the ROM.
So what I want to ask is, is it possible at this time to restore the bootloader to stock to avoid that "boot loader unlocked" notice and possibly become eligible for warranty again?

kagoromo said:
Hello, I recently went through the whole process of unlocking bootloader, installing TWRP recovery and flashing ROM, and I am at version 11.0.350 ST ROW currently.
The ROM works fine, but now at every boot I am greeted by the "The boot loader is unlocked and software integrity cannot be guaranteed. <snip> Press power button to pause boot/continue" notice.
According to google, it's apparently a result of the bootloader unlocking process.
I tried to lock the bootloader again using "fastboot flashing lock", but then the phone stopped booting normally. It got stuck at the boot logo (which I believe means bricked?).
It wouldn't work until I unlocked bootloader and reflash the ROM.
So what I want to ask is, is it possible at this time to restore the bootloader to stock to avoid that "boot loader unlocked" notice and possibly become eligible for warranty again?
Click to expand...
Click to collapse
Share screenshot, I think this normal boot step when BL is unlocked on lenovo / Zuk phones.

benjieb said:
Share screenshot, I think this normal boot step when BL is unlocked on lenovo / Zuk phones.
Click to expand...
Click to collapse
Here is the "The boot loader is unlocked..." screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And here's the boot loader:

kagoromo said:
Hello, I recently went through the whole process of unlocking bootloader, installing TWRP recovery and flashing ROM, and I am at version 11.0.350 ST ROW currently.
The ROM works fine, but now at every boot I am greeted by the "The boot loader is unlocked and software integrity cannot be guaranteed. <snip> Press power button to pause boot/continue" notice.
According to google, it's apparently a result of the bootloader unlocking process.
I tried to lock the bootloader again using "fastboot flashing lock", but then the phone stopped booting normally. It got stuck at the boot logo (which I believe means bricked?).
It wouldn't work until I unlocked bootloader and reflash the ROM.
So what I want to ask is, is it possible at this time to restore the bootloader to stock to avoid that "boot loader unlocked" notice and possibly become eligible for warranty again?
Click to expand...
Click to collapse
Do you try flash qfil rom after lock bootloader?

Question How to setup spflash for the soft bricked phone

Hi, my wife gifted me that Chopin phone form China, after a wrong "flash and lock" global firmware now my phone is stuck on bootloader.
According to this thread:
Redmi Note 10 Pro 5G brick
Redmi Note 10 Pro 5G Chinese version with fastboot unlocked. After unsuccessful firmware. At startup, it goes into fastboot, you can load it into recovery. Wipe doesn't help. When trying to flash through fastboot MiFlashPro "FAILED (remote: 'not...
forum.xda-developers.com
I have all the files needed to setup sp flash and try to put again the Rom in the phone, which is now not unlocked and no usb debugging on.
Can someone please give me a tutorial on how to use those files? My phone still not recognised in sp flash com port, I don't know how to do.
If anyone will help me it will be so appreciated, thanks!

If you need to disable authorisation, did you run the MTK Auth Bypass tool and get the message "Protection disabled"? That's what I had to do before SP Flash Tool would flash the phone (without disconnecting it or rebooting), and I also had to set the baud rate to 921600, although that was all under Linux, and the phone was still unlocked.

it's complicated. with phone locked fastboot commands don't work. with my hold mi a3 fastboot flashing unlock command work. but with miui and mtk chipset probably it's useless. but u can try. if u boot into bootloader with mediatek driver the pc should recognize your phone also if it's blocked

1: Unzip this attached file into a folder. run it.
2: select the unlock bootloader and start, then connect you phone via usb with all three buttons pressed. (Phone must be off before connect, )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3: Your bootloader will be unlocked.
4: Close the program and re-start again, this time, select auth bypass and start, then repeat the phone connection. after at the bottom line, it show bypass ok.
from here you may flash again rom via Miflash or SPflash.
P.S: I think the file size is too big, I can not attach it here. Sorry! P.M me if you wish.

Thanks for the help, the problem I'm facing it's Auth tool cont recognise the phone, when I open the shell keep saying waiting for the device.
Driver are mtk with Libus installed, dunno.
When I restart the phone immediately have the logo then, if volume up I can log mi assistant or with volume down the bootloader screen.

Bonscia said:
Thanks for the help, the problem I'm facing it's Auth tool cont recognise the phone, when I open the shell keep saying waiting for the device.
Driver are mtk with Libus installed, dunno.
When I restart the phone immediately have the logo then, if volume up I can log mi assistant or with volume down the bootloader screen.
Click to expand...
Click to collapse
1. Check your device driver for USB, suggest you re-install the MTK usb driver.
2. First run the program, select the Auth by pass then press start.
3. Make sure phone is in "power off" state, press Vol+, Vol- and power (all three at the same time), and don't release it, plug in USB cable and wait.... Don't release these three buttons until it is Auth by pass OK.
During this process, take a look at device manager, there must be one item like portable device - USB ( Com 3). keep flashing.

sure u add reinstall mtk driver

Tried many drivers, always same result:
Driver says the device can't start. Tried to install lisbus too but no changes.

Bonscia said:
Tried many drivers, always same result:
View attachment 5499127
View attachment 5499129
Driver says the device can't start. Tried to install lisbus too but no changes.
Click to expand...
Click to collapse
you "must" remove (uninstall) the driver first then re-install the MTK usb driver again.

kirinin said:
you "must" remove (uninstall) the driver first then re-install the MTK usb driver again.
Click to expand...
Click to collapse
I did that many times, with win 10 no drivers signed mode, with many different mtk drivers but nothing was working. I'll try clean my windows and then start again with the drivers.

Bonscia said:
I did that many times, with win 10 no drivers signed mode, with many different mtk drivers but nothing was working. I'll try clean my windows and then start again with the drivers.
Click to expand...
Click to collapse
is a win10 problem that i also haved. hard to solve. u can try windows 7 via virtualbox (solved a lot of my problems in the past) or format and install a modded version of win10 (but i dont suggest this)

Virtual box looks no longer available, I'll install a fresh copy of win 7 in another partition, never give up lol

virtualbox is available for all system. i have a win7 virtualized under my linux pc, and miflash works fine. no bugs. if my tips makes you happy dont try. is not my problem, i didnt bricked my phone. i dont make things without know what i'm doing. good look. u can buy a new phone if u prefere

wetito said:
virtualbox is available for all system. i have a win7 virtualized under my linux pc, and miflash works fine. no bugs. if my tips makes you happy dont try. is not my problem, i didnt bricked my phone. i dont make things without know what i'm doing. good look. u can buy a new phone if u prefere
Click to expand...
Click to collapse
? I've just told you I've tried to download virtual box for win 10 but it's not avaible now or server was temporarily down for the download, so my only way it's to set up a fresh copy on win 7 on my pc, I can't understand your hanger answer.

kirinin said:
1: Unzip this attached file into a folder. run it.
2: select the unlock bootloader and start, then connect you phone via usb with all three buttons pressed. (Phone must be off before connect, )
View attachment 5498521
3: Your bootloader will be unlocked.
4: Close the program and re-start again, this time, select auth bypass and start, then repeat the phone connection. after at the bottom line, it show bypass ok.
View attachment 5498523
from here you may flash again rom via Miflash or SPflash.
P.S: I think the file size is too big, I can not attach it here. Sorry! P.M me if you wish.
Click to expand...
Click to collapse
Hi, can you share this Zip file with link drive or mega?
Thanks in advance

Which zip file? I have only this one
https://forum.xda-developers.com/attachments/mtk_bypass_final-rar.5444529/I
finally flashed the Rom with so flash but now the phone reboot in assistance mode sayings "NV data corrupted" I'm about to cry

Hi, I've followed your instructions, I've finally flashed the Rom into the phone, but now phone bootloop into recovery, it says "nvdata is corrupted", I've took the scatter file from the Rom folder, how to fix that problem now? Thanks.

Link with files is this, I've seen other link don't work
Redmi Note 10 Pro 5G brick
Redmi Note 10 Pro 5G Chinese version with fastboot unlocked. After unsuccessful firmware. At startup, it goes into fastboot, you can load it into recovery. Wipe doesn't help. When trying to flash through fastboot MiFlashPro "FAILED (remote: 'not...
forum.xda-developers.com
Download MTK Universal Tool V5 | MediaTek All in One Tool Latest Free
MTK Universal V5 Tool is a small MediaTek All in One Tool designed to disable user locks, bypass FRP, Auth Bypass, Format Data (user data format),
www.gadgetsdr.com

Bonscia said:
Hi, I've followed your instructions, I've finally flashed the Rom into the phone, but now phone bootloop into recovery, it says "nvdata is corrupted", I've took the scatter file from the Rom folder, how to fix that problem now? Thanks.
Click to expand...
Click to collapse
try wipe data. also u can control the active slot. try change it and reboot

Hi, finally I can install the Recovery V12.5.16.0.RKPCNXM rom and the engineering rom but have no baseband and no IMEI. Tried many times to put my IMEI codes with no luck, looks I need the mt6893 modem file to use sn writer but no way to find them on net, can someone share those files please? Thanks