I updated to Marshmallow and after the update I could not install the twrp i got failed
Message
PHP:
<ID:0/010> Odin engine v(ID:3.1101)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> recovery.img
<ID:0/010> NAND Write Start!!
<ID:0/010> FAIL! (Auth)
<ID:0/010>
<ID:0/010> Complete(Write) operation [QRCODE]failed[/QRCODE].
<OSM> All threads completed. (succeed 0 / failed 1)
I just found the solution turned out the reactivation lock was the problem. just turn it off
setting> security and turn off 'reactivation lock
Related
Hi , When I run Odin3_v1.7 to flash my GT-P1000 with GB_Stock_Safe_v5, the flash always fails after movinand.mst.
I really appreciate your help guys.
Here is odin report:
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> cache.rfs
<ID:0/005> dbdata.rfs
<ID:0/005> factoryfs.rfs
<ID:0/005> movinand.mst
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When i tried to unbrick my phone in odin i get this error:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ho, i have a S6 from att g920a, i do a factory reset and dont start any more, only see the first screen "S6" and reboot constantly, turn on only if its connected to the charger, already try to flash with odin but not lucky, THANKS!!!
this is with odin 3.10.7
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
latest firm OJ7
THANKS!!!
I was using Odin to flash the combination file, I received this error.
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> abl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone help me?
dl1421 said:
Can anyone help me?
Click to expand...
Click to collapse
Use Odin3_v3.12.3
flash SM-G950U_1_20171206190014_0q1dpbea53_fac
reset
flash
COMBINATION_FA70_G950USQU2AQK2_CL12501507_QB15652609_REV00_user_mid_noship_MULTI_CERT.tar
unlok
flash
SM-G950U_1_20171206190014_0q1dpbea53_fac
reset
frp unlock
When I try to flash my phone I get errors like
1.
<ID:0/010> Odin engine v(ID:3.1401)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 4659 M
<ID:0/010> SetupConnection..
<ID:0/010> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
2.
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin.lz4
<ID:0/008> NAND Write Start!!
3.
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
4.
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 4661 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> param.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How to fix it
UPD: i fixed it https://samfw.com/firmware/SM-A600FN/SEK/A600FNXXU9CVE1
And the same error occurs with other firmware versions? Any error shows on phone screen? And what are you trying to flash?
nqnxev said:
And the same error occurs with other firmware versions? Any error shows on phone screen? And what are you trying to flash?
Click to expand...
Click to collapse
1.Yes
2.No
3.I am trying to flash official android 8 firmware (downgrade)
blvxrd said:
3.I am trying to flash official android 8 firmware (downgrade)
Click to expand...
Click to collapse
Here's the problem. It's impossible to downgrade to firmware with lower bootloader version. However, it is possible if you unlock your bootloader, flash custom recovery and then flash your Oreo through TWRP/OrangeFox.
nqnxev said:
Here's the problem. It's impossible to downgrade to firmware with lower bootloader version. However, it is possible if you unlock your bootloader, flash custom recovery and then flash your Oreo through TWRP/OrangeFox.
Click to expand...
Click to collapse
thanks, i have already repaired it