||| G925AUCS4CPF1 ||| Odin FULL Firmware Restore - AT&T Samsung Galaxy S6 Edge

This is Newest version of 6.0.1.
Is binary number 4! Once updated you can never go back to older software
Hope this helps you.
mega.nz/#F!Xd0TXJhK!3RZu8v2P3rqloIffqraIKg
If you need help with anythin message on skype: hjkjohn

Wow... lets me see...

thanks

John97xj said:
This is Newest version of 6.0.1.
Is binary number 4! Once updated you can never go back to older software
Hope this helps you.
mega.nz/#F!Xd0TXJhK!3RZu8v2P3rqloIffqraIKg
If you need help with anythin message on skype: hjkjohn
Click to expand...
Click to collapse
Thank you!
I have a 5.1.1 version, can I ODIN this version right away, or should I gradually update versions up to this one?
Also, I am not rooted. Will this trip KNOX?
Thanks

[email protected] said:
Thank you!
I have a 5.1.1 version, can I ODIN this version right away, or should I gradually update versions up to this one?
Also, I am not rooted. Will this trip KNOX?
Thanks
Click to expand...
Click to collapse
Flash directly to this version and NO it will not trip KNOX

John97xj said:
This is Newest version of 6.0.1.
Is binary number 4! Once updated you can never go back to older software
Hope this helps you.
mega.nz/#F!Xd0TXJhK!3RZu8v2P3rqloIffqraIKg
If you need help with anythin message on skype: hjkjohn
Click to expand...
Click to collapse
I don't know how gracious the other bloggers are but I want to tell you how much I appreciate this Odin update. I am really grateful. Again thanks!

Serrone said:
I don't know how gracious the other bloggers are but I want to tell you how much I appreciate this Odin update. I am really grateful. Again thanks!
Click to expand...
Click to collapse
Hope the ODIN works.. Much appreciated!

Hello Friend,
if I upgrade to downgrade G925AUCU3CPD6 I can do if something goes wrong?

rafsi said:
Hope the ODIN works.. Much appreciated!
Click to expand...
Click to collapse
Worked perfectly fine. Again a big thank you.

Help Me!!
John97xj said:
This is Newest version of 6.0.1.
Is binary number 4! Once updated you can never go back to older software
Hope this helps you.
mega.nz/#F!Xd0TXJhK!3RZu8v2P3rqloIffqraIKg
If you need help with anythin message on skype: hjkjohn
Click to expand...
Click to collapse
Hello Friend,
if I upgrade to downgrade G925AUCU3CPD6 I can do if something goes wrong?

---------- Post added at 12:17 PM ---------- Previous post was at 12:16 PM ----------
bunnycool said:
Flash directly to this version and NO it will not trip KNOX
Click to expand...
Click to collapse
Great.
Just to make sure, I'm suppose to flash all of the files in the folder, not just the AP, right?
Thanks

[email protected] said:
---------- Post added at 12:17 PM ---------- Previous post was at 12:16 PM ----------
Great.
Just to make sure, I'm suppose to flash all of the files in the folder, not just the AP, right?
Thanks
Click to expand...
Click to collapse
Yes

Can you explain how to update with odin, im new to all this
Enviado desde mi Be Touch 3 mediante Tapatalk

vicente.gonzalez said:
Can you explain how to update with odin, im new to all this
Enviado desde mi Be Touch 3 mediante Tapatalk
Click to expand...
Click to collapse
Hello Friend,
It's really simple , before , you must install kies; in ODIN just place the files :
AP = AP_XXXXXXX
BL = BL_XXXXXXX
CP = CP_XXXXXXX
CSC = CSC_XXXXXXX
Enter in Download Mode. Turn off your device and then press and hold Volume Down + Home + Power buttons simultaneously for 2-3 seconds; in ODIN Click Start, without touching anything more.

phone says: secure check fail : (pit)
when flashing ( if i flash an older version it says that the device is 4 and the binary is 3 )

Can you upload the files to other server? Because I cant donwload the big file (1.7GB) beacuase the free limit its like 1.1GB and the file doesnt donwload complete, I will really appreciate, thanks!

rapidrayo said:
Can you upload the files to other server? Because I cant donwload the big file (1.7GB) beacuase the free limit its like 1.1GB and the file doesnt donwload complete, I will really appreciate, thanks!
Click to expand...
Click to collapse
Wait me a second. I'm uploading all files to Google Drive

Link Google Drive: https://drive.google.com/file/d/0B1CkUUq9QV3AMWE3bDNCTFFRQzg/view?usp=sharing

Dear friend , is it possible to use the version you are providing to upgrade from 5.0.1 ? Or it s needed to upgrade first from 5.0.1 to 5.1.1? Thanks for your help

Alexjab said:
Dear friend , is it possible to use the version you are providing to upgrade from 5.0.1 ? Or it s needed to upgrade first from 5.0.1 to 5.1.1? Thanks for your help
Click to expand...
Click to collapse
you can directly upgrade to 6.0.1 by using the provided files, no need of incremental updates.

Related

[TOOL]MotoTool! ROOT,Flash recovery's,RestoreToStock,Drivers,FixBootLogo]RC1.1

moderators please CLOSE this thread... i have merged my applications and i don't need this one.....
THE NEW TOOL IS HERE.... http://forum.xda-developers.com/showthread.php?p=50029015#post50029015
PLEASE ANY QUESTION, SUGGESTION
Really good
Wow, very nice man. Really helpfull.
Could you the add the option to flash another stock rom? One from Europe, for example?
In any case, good work.
where's the download link?
Great tool, would it be better to take the stock retail us firmware out and people can add there own region firmware to it, and you can upload a smaller tool then.
denzel09 said:
Really good
Click to expand...
Click to collapse
you make me feel fine, thanks
shibumi77 said:
Wow, very nice man. Really helpfull.
Could you the add the option to flash another stock rom? One from Europe, for example?
In any case, good work.
Click to expand...
Click to collapse
will8578 said:
Great tool, would it be better to take the stock retail us firmware out and people can add there own region firmware to it, and you can upload a smaller tool then.
Click to expand...
Click to collapse
yes in the next release maybe will add this function, and will give instructions about where put the the stock images
jerkysh said:
where's the download link?
Click to expand...
Click to collapse
OP updated
i have Global Version , if i do revert stock it will flash US version , does this make any problems with Carrier ?
Jwtiyar said:
i have Global Version , if i do revert stock it will flash US version , does this make any problems with Carrier ?
Click to expand...
Click to collapse
i have the global version too, and always flash this image and all is working great, tell us if this worked for you.. but it should work like a champ!
ok thank you , will give a try after finishing downloads .
---------- Post added at 07:35 PM ---------- Previous post was at 07:26 PM ----------
if get to stock it will unroot and remove my CWM recovery?
Jwtiyar said:
ok thank you , will give a try after finishing downloads .
Click to expand...
Click to collapse
ok buddy, first in the tool reboot to fastboot, and then select Back to stock, my mistake, i will fix this in the next release
Jwtiyar said:
ok thank you , will give a try after finishing downloads .
---------- Post added at 07:35 PM ---------- Previous post was at 07:26 PM ----------
if get to stock it will unroot and remove my CWM recovery?
Click to expand...
Click to collapse
yes you will lose root, and the recovery
but yo can root your device, and install CWM recovery using this tool
excelente aporte
OP Updated
tazlooney89 said:
excelente aporte
Click to expand...
Click to collapse
gracias!
i selected back to stock while device was in boot loader , but nothing happens and boot up my ROM . !!
Jwtiyar said:
i selected back to stock while device was in boot loader , but nothing happens and boot up my ROM . !!
Click to expand...
Click to collapse
buddy you are right, im fix it give me 10 min..
ok i have fix it, i will upload again a tool, if you don want download it, open the folder tool ,open teh folder US_retail_XT1032_KXB20.9-1.8-1.4_CFC.xml and run the windows bat..... or if you want, wait for the upload
UPDATING TO BETA2
some bug fixes
alonsoch said:
buddy you are right, im fix it give me 10 min..
ok i have fix it, i will upload again a tool, if you don want download it, open the folder tool ,open teh folder US_retail_XT1032_KXB20.9-1.8-1.4_CFC.xml and run the windows bat..... or if you want, wait for the upload
Click to expand...
Click to collapse
thanks i did run windows bat , but give error that program cant start because adbwindapi.dll is missing from your computer .
i think it means needed fastboot and adb drivers not exist in this folder . isn't it?

[Q] Need to Flash my Phone (Galaxy S GT-I9000)

Hi Team
Need to Flash my Phone (Galaxy S GT-I9000)
Build (GINGERBREAD.DDJV9)
PLEASE HELP
Could you provide the Baseband?
Gokulbalram said:
Could you provide the Baseband?
Click to expand...
Click to collapse
i have attached it
baby_blues said:
i have attached it
Click to expand...
Click to collapse
You will have to download the latest version of samsung's firmware first.
Just tell me which country you are at.
EDIT: Do you have Root?
Gokulbalram said:
You will have to download the latest version of samsung's firmware first.
Just tell me which country you are at.
EDIT: Do you have Root?
Click to expand...
Click to collapse
am from india
no i do not have root access. also please help me in root this phone ..
baby_blues said:
am from india
no i do not have root access. also please help me in root this phone ..
Click to expand...
Click to collapse
Then go to Samfirmware.com and download the latest firmware. (There will be two Indian versions, choose INU).
i have flashed the phone could you help further please....
baby_blues said:
i have flashed the phone could you help further please....
Click to expand...
Click to collapse
Don't Fret , We at XDA are always here to help. Now that you've flashed a new firmware, could you provide me with another screenshot of the About Screen Window?
Could you also Quote me when you need help please? Otherwise it won't show up under my Notifications.
Gokulbalram said:
Don't Fret , We at XDA are always here to help. Now that you've flashed a new firmware, could you provide me with another screenshot of the About Screen Window?
Could you also Quote me when you need help please? Otherwise it won't show up under my Notifications.
Click to expand...
Click to collapse
i was able to flash and update to 4.3.1 Thanks to XDA
thanks guys for your help :good::good::good:

Help Me - Update Galaxy Gear Sm-V700 To Tizen Frimware

Hi
Please help me friends
My model: Galaxy Gear SM-V700
Today I wanted BTU-V700XXUCNF1-20140704165245 firmware Samsung download site, to update the Tizen.
The first time I went Downloading mode and using Odin 3.9 program, the AP to firmware, I connected to PC and START ...
Unfortunately, still 20 minutes left on the message : BOOTLOADER
What should i do?
Please Help ??
dj_s_021 said:
Hi
Please help me friends
My model: Galaxy Gear SM-V700
Today I wanted BTU-V700XXUCNF1-20140704165245 firmware Samsung download site, to update the Tizen.
The first time I went Downloading mode and using Odin 3.9 program, the AP to firmware, I connected to PC and START ...
Unfortunately, still 20 minutes left on the message : BOOTLOADER
What should i do?
Hi
perhaps try first to flash XEO-NE9 and then BTU- NF1
Click to expand...
Click to collapse
dabenaute said:
dj_s_021 said:
Hi
perhaps try first to flash XEO-NE9 and then BTU- NF1
Click to expand...
Click to collapse
Thanks, I'll give a link to download XEO-NE9 the firmware ...
Then how should I flash?
Click to expand...
Click to collapse
Really thank you
The problem was solved
Thank you very much.
dj_s_021 said:
Really thank you
The problem was solved
Thank you very much.
Click to expand...
Click to collapse
glad for you
Can someone provide more detail on XEO-NE9 firmware?
Where can I find this?
I have been unable to flash my Gear to Tizen, just starts and never finishes and then I have to flash back to stock. Really wanting to get the benefits of Tizen and do not care about any apps compatibility I will loose.
---------- Post added at 09:27 AM ---------- Previous post was at 09:21 AM ----------
dabenaute said:
dj_s_021 said:
Hi
Please help me friends
My model: Galaxy Gear SM-V700
Today I wanted BTU-V700XXUCNF1-20140704165245 firmware Samsung download site, to update the Tizen.
The first time I went Downloading mode and using Odin 3.9 program, the AP to firmware, I connected to PC and START ...
Unfortunately, still 20 minutes left on the message : BOOTLOADER
What should i do?
Hi
perhaps try first to flash XEO-NE9 and then BTU- NF1
Click to expand...
Click to collapse
Think I found it, so flash the Polish firmware first?
Click to expand...
Click to collapse
Think I found it, so flash the Polish firmware first?[/QUOTE]
Yep
arcsum68 said:
Can someone provide more detail on XEO-NE9 firmware?
Where can I find this?
I have been unable to flash my Gear to Tizen, just starts and never finishes and then I have to flash back to stock. Really wanting to get the benefits of Tizen and do not care about any apps compatibility I will loose.
---------- Post added at 09:27 AM ---------- Previous post was at 09:21 AM ----------
dabenaute said:
Think I found it, so flash the Polish firmware first?
Click to expand...
Click to collapse
Here's Canadian ne9
http://www.mediafire.com/?c6qzuvuksuxcega
Click to expand...
Click to collapse
dabenaute said:
Think I found it, so flash the Polish firmware first?
Click to expand...
Click to collapse
Yep [/QUOTE]
Can I flash that and then immediately flash another firmware, or do I need to boot up in between flashes?
Thanks so much, finally got it going, and for anyone else's benefit it automatically reboots after the load so you cannot flash both consecutively.

AT&T S5 Lollipop Stock ROM G900AUCU3BOC4

Hi All:
Click the URL to get the Lollipop 5.0 STOCK Offficial ROM for AT&T S5 SM-G900A.
https://
drive.google.
com/file/d/0B2QQ1ShKpLTtYjU0aDJCLVFFSFk/view?usp=sharing
numatron said:
Hi All:
Click the URL to get the Lollipop 5.0 STOCK Offficial ROM for AT&T S5 SM-G900A.
https://
drive.google.
com/file/d/0B2QQ1ShKpLTtYjU0aDJCLVFFSFk/view?usp=sharing
Click to expand...
Click to collapse
The download filename is G900AUCU3BOC4_OneClick.zip.
Could you expand your OP page to explain what the file is?
Is it an ODIN flash? Is it an executable like the filename suggests?
Good stuff, it will probably prove useful in the future, but 1.5G download without a description, makes me curious.
OC4 Flashing
Has anyone found luck with flashing G900AUCU3BOC4 with the file in OP? (I downloaded the file and I have the executable open right now but I don't want to take any risks flashing this firmware).
More info please
Sent from my SAMSUNG-SM-G900A using Tapatalk
---------- Post added at 10:19 PM ---------- Previous post was at 09:21 PM ----------
I wouldn't trust it. Dude has 2 post 1 in S5 and 1 in S4 thread and both the exact same post except different file name
Sent from my SAMSUNG-SM-G900A using Tapatalk
Confirmed Working
Thank you very much for posting this. I had soft-bricked my brand new GS5 not 2 days into owning it trying to downgrade/root without reading anything in the forums. i ended up having to get a replacement but it has not arrived yet and i still have the one that used to be bricked until i downloaded the file, put the phone into ODIN Mode and ran the application. I'm a little mad at myself for not finding this sooner but happy that this exists just in case anything happens like i previously stated.
Thanks this fixed my bricked S5 that I botched the lollipop update on! This should probably be uploaded to a mirror and added to a couple help threads. Sweet man thanks!
Works
Created an account just to post that this file worked. I soft bricked my phone and tried a few roms without luck before finding this one. Threw my phone into Recovery Mode and ran the application and now my phone is up and running again on 5.0. Awesome!
Is this the stock OC4 OTA update to 5.0? If so, users that use this file wont be able to downgrade back to 4.4.2 as said here: http://forum.xda-developers.com/showthread.php?t=3076803
Sent from my SM-G920F using Tapatalk
Is it possible to pre-root the rom here posted?
Thanks.
quinielascom said:
Is it possible to pre-root the rom here posted?
Thanks.
Click to expand...
Click to collapse
If it's Stock OC4 received by OTA, then no. Go here if you're on 4.4.2 or 4.4.4 : http://forum.xda-developers.com/showthread.php?t=3076803 pre-rooted too.
Sent from my SM-G900F using Tapatalk
UsandThem said:
If it's Stock OC4 received by OTA, then no. Go here if you're on 4.4.2 or 4.4.4 : http://forum.xda-developers.com/showthread.php?t=3076803 pre-rooted too.
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
mmm, i dont have idea but ota update is a small file. i already download the posted file and seem full rom.
and unfortunately i bought the s5 with lollipop 5.0 software.
quinielascom said:
mmm, i dont have idea but ota update is a small file. i already download the posted file and seem full rom.
and unfortunately i bought the s5 with lollipop 5.0 software.
Click to expand...
Click to collapse
Theres no method as of today to root Stock OC4 as the bootloader is locked. Try some Google searches? It doesn't hurt! [emoji1]
Sent from my SM-G900F using Tapatalk
Didn't work, need help?
Hey guys so i tried to downgrade to kitkat from lollipop on my SM-G900A, and i think i softbricked it, it only boots to the odin mode page, anyway i downloaded the executable provided by op and it didnt work it says failed everytime, anyone have a .tar.md5 version that i can try? or something else i can try? i dont know what to do
Edit: Nevermind found the file i was looking for in another thread.
Did you get it working?
Joeohoh said:
Hey guys so i tried to downgrade to kitkat from lollipop on my SM-G900A, and i think i softbricked it, it only boots to the odin mode page, anyway i downloaded the executable provided by op and it didnt work it says failed everytime, anyone have a .tar.md5 version that i can try? or something else i can try? i dont know what to do
Edit: Nevermind found the file i was looking for in another thread.
Click to expand...
Click to collapse
I've also softbricked my phone trying to downgrade to kitkat from lollipop. I tried to use Kies and Smart Switch but no luck. I tried talking to Samsung and they said "You have to send it in". Crazy that software can get so screwed up with no recovery.
My phone's not under warranty so I'm trying to do it myself. Serves me right for not rooting it when I was on kitkat and then getting the OTA of Lollipop.
If anyone can even steer me towards a forum that I can get some suggestions to recover this mess, I'd appreciate it. Thanks!
I can upload the tar that worked for me when I get home
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Joeohoh said:
I can upload the tar that worked for me when I get home
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
I would like this file too. Thanks in advance
Any luck on that .tar file?
There firmware md5 lollipop ?
numatron said:
Hi All:
Click the URL to get the Lollipop 5.0 STOCK Offficial ROM for AT&T S5 SM-G900A.
https://
drive.google.
com/file/d/0B2QQ1ShKpLTtYjU0aDJCLVFFSFk/view?usp=sharing
Click to expand...
Click to collapse
There firmware md5 lollipop ?
---------- Post added at 11:01 PM ---------- Previous post was at 10:33 PM ----------
Joeohoh said:
Hey guys so i tried to downgrade to kitkat from lollipop on my SM-G900A, and i think i softbricked it, it only boots to the odin mode page, anyway i downloaded the executable provided by op and it didnt work it says failed everytime, anyone have a .tar.md5 version that i can try? or something else i can try? i dont know what to do
Edit: Nevermind found the file i was looking for in another thread.
Click to expand...
Click to collapse
i have the same problem, i need some firmware lolipop for odin (tar or md5) please help, thanks.
you are a God!!
numatron said:
Hi All:
Click the URL to get the Lollipop 5.0 STOCK Offficial ROM for AT&T S5 SM-G900A.
https://
drive.google.
com/file/d/0B2QQ1ShKpLTtYjU0aDJCLVFFSFk/view?usp=sharing
Click to expand...
Click to collapse
THHHHAAAAAAAANKKKSSSSSSS!!!! you save my life bro!!! you're the best!!! it's work for my!!! really thanks dude!
It worked +rep +rep +rep you sir are amazing, i have spent so much time on so many different methods none of them worked until this one. If anyone has a softbricked s5 on lolipop 5.0, this is the way to fix it

[Download] SM-N960U1 - Android Pie - N960U1UEU1CSB3 - Odin

Download HERE.
File is now uploaded
Use the many guides on XDA to flash with Odin.
thanks
---------- Post added at 12:08 PM ---------- Previous post was at 11:23 AM ----------
i assume it is still uploading because i dont see it?
Downloaded the file twice, but each time the ZIP couldn't extract. Anybody else with this problem?
it's up on SamFirm if you guys want to use that method instead
what information do i have to have to get it from samfirm i know there are alot of blanks to fill in
ThaGeNeCySt said:
it's up on SamFirm if you guys want to use that method instead
Click to expand...
Click to collapse
Download speeds show I have 8 days left in the download from fw.update.to. Is there another option, perhaps?
download from the link above took an hour
fraize said:
Download speeds show I have 8 days left in the download from fw.update.to. Is there another option, perhaps?
Click to expand...
Click to collapse
ouch... i downloaded at about 112mb / sec and was done in a few minutes.
I guess use the link in OP... i thought samfirmtool would for sure be the fastest
Is this the exact version that will eventually be offered OTA?
serpent2005 said:
Is this the exact version that will eventually be offered OTA?
Click to expand...
Click to collapse
Yep
---------- Post added at 03:04 PM ---------- Previous post was at 03:04 PM ----------
Still no RCS on T-Mobile w/ unlocked device :'(
AndroidUser00110001 said:
Download HERE.
File is now uploaded
Use the many guides on XDA to flash with Odin.
Click to expand...
Click to collapse
This > Joy.
Just finished this and now restoring from SmartSwitch. Works like a charm. Thanks !
AndroidUser00110001 said:
Download HERE.
File is now uploaded
Use the many guides on XDA to flash with Odin.
Click to expand...
Click to collapse
Thank you! Can anyone confirm if this official release enables WiFi calling on Verizon? I want to switch to unlocked firmware, but I need this feature.
anyone know what bootloader version this has?
mangohorse said:
This > Joy.
Just finished this and now restoring from SmartSwitch. Works like a charm. Thanks !
Click to expand...
Click to collapse
Is this the unlocked or Carrier version?
le0.br4zuc4 said:
Is this the unlocked or Carrier version?
Click to expand...
Click to collapse
Isn't the U1 the unlocked version?
Jammol said:
Isn't the U1 the unlocked version?
Click to expand...
Click to collapse
I think all the US Note9 are U1 lol I might be wrong or confusing lol
Does anyone know if WiFi calling will now work on the new unlocked firmware for a Verizon user?
AndroidUser00110001 said:
Download HERE.
File is now uploaded
Use the many guides on XDA to flash with Odin.
Click to expand...
Click to collapse
Can I flash this to my unlocked ATT Note 9, want to change it to the U1 version regardless of what Samsung has coming...
Got the OTA today and the size is 1.6 GB, whereas, the download here is close to 4 GB. Why the difference?
Which security patch does this have?

Categories

Resources