Decided to OTA (not sure why) my Moto G LTE that was and was running stock but with an unlocked bootloader but have ran into issues and think i am now just digging a bigger hole for myself so I am asking for some help please.
I after the attempted update i started having issues with some apps not working and/or uninstalling themselves. Play store was the worst (tired wiping cache and data but no joy) then the camera decided it would uninstall and then any other camera apps in added wouldn't save pictures. Managed to get a fresh stock rom install.
So i though i'd update to CM13, downloaded the file, twrp and Gapps and set about booting into recovery to install twrp but initially i was unable to enter recovery and it stayed on the fastboot screen. Now i am getting the dead android and the red triangle but have a working stock rom.
I can now no longer use fastboot, all it does is start the rom as if i had just powered on normally.
Any help appreciated.
mclovin9091 said:
Decided to OTA (not sure why) my Moto G LTE that was and was running stock but with an unlocked bootloader but have ran into issues and think i am now just digging a bigger hole for myself so I am asking for some help please.
I after the attempted update i started having issues with some apps not working and/or uninstalling themselves. Play store was the worst (tired wiping cache and data but no joy) then the camera decided it would uninstall and then any other camera apps in added wouldn't save pictures. Managed to get a fresh stock rom install.
So i though i'd update to CM13, downloaded the file, twrp and Gapps and set about booting into recovery to install twrp but initially i was unable to enter recovery and it stayed on the fastboot screen. Now i am getting the dead android and the red triangle but have a working stock rom.
I can now no longer use fastboot, all it does is start the rom as if i had just powered on normally.
Any help appreciated.
Click to expand...
Click to collapse
You say you have working stock rom, so can you boot your phone to home screen? If so in ADB try using this command in CMD "mfastboot reboot bootloader" without the speech marks.
stonedpsycho said:
You say you have working stock rom, so can you boot your phone to home screen? If so in ADB try using this command in CMD "mfastboot reboot bootloader" without the speech marks.
Click to expand...
Click to collapse
Yes can get onto the home screen and use the phone (so far) without issue, get as far as the fastboot screen but then states 'fastboot' is not recognized as an internal or external command, operable program or batch file. That is given for any command including "reboot"
Stock ROMs do things like that to unlocked phones.
Check if you still have root access - I'm guessing you lost it, so you'll need to root again - Root Checker
Flash again the last and the proper TWRP tool (make sure you download for THEA) using the Rashr Flash Tool app if you can't access the fastboot screen.
Put your ROM on a SD card, erase everything and reinstall the system and the proper gapps (use at least MINI, so you could recover your old settings from your google account at first launch).
But think about ditching the stock - give Temasek a try. You will have to modify a couple of files to make the TITAN release work on your THEA, but it's worth aplenty.
Keep us posted.
mclovin9091 said:
Yes can get onto the home screen and use the phone (so far) without issue, get as far as the fastboot screen but then states 'fastboot' is not recognized as an internal or external command, operable program or batch file. That is given for any command including "reboot"
Click to expand...
Click to collapse
Have you enabled "usb debugging"? in developer settings (tap the build number 7 times) Do you have ADB installed? If so did you open CMD in the ADB folder?
FCorvin said:
Stock ROMs do things like that to unlocked phones.
Check if you still have root access - I'm guessing you lost it, so you'll need to root again - Root Checker
Flash again the last and the proper TWRP tool (make sure you download for THEA) using the Rashr Flash Tool app if you can't access the fastboot screen.
Put your ROM on a SD card, erase everything and reinstall the system and the proper gapps (use at least MINI, so you could recover your old settings from your google account at first launch).
But think about ditching the stock - give Temasek a try. You will have to modify a couple of files to make the TITAN release work on your THEA, but it's worth aplenty.
Keep us posted.
Click to expand...
Click to collapse
Cheers, any info on what files need modding?
Was rooted, managed to get adb to work last night and managed to reinstall twrp but now i can't get the rom to load and can't flash any CROM.
So used the all in one tool to re install stock 5.0.2.
Going to grab a brew and chill for a bit.
Aiight, once you downloaded the zip on your PC, go to:
1. ...titan.zip\META-INF\com\android
Drag the "metadata" file on a notepad page and replace 0x4882 with 0x4821 (your phone's bootloader code) and save.
2. ...titan.zip\META-INF\com\google\android
Drag the "updater-script" file on a notepad page, hit "Search and replace" for any of the XT's in there with yours, XT1072.
You will have 3 hits.
Example: Search and replace XT1069 with XT1072 ->
getprop("ro.product.device") == "XT1069"
getprop("ro.build.product") == "XT1069"
titan,titan_umts,titan_udstv,titan_umtsds,titan_retaildsds,XT1068,XT1064,XT1063,XT1069
will become:
getprop("ro.product.device") == "XT1072"
getprop("ro.build.product") == "XT1072"
titan,titan_umts,titan_udstv,titan_umtsds,titan_retaildsds,XT1068,XT1064,XT1063,XT1072.
(3 - while still here)
Search and replace the initial 0x4882 bootloader with yours, 0x4821.
Save the changes.
And... you're good to go.
Some native Moto apps won't show up in PlayStore because of this, but you can get all the Moto stuff from here (if you really love them).
Once installed, enjoy the full power of your brand new Android 6 phone.
Don't forget to do all the things you did as a kid once: activate the developer options as mentioned above, set the SuperSu permissions and so on.
However: screw-ups occur mainly because of conflicts between the new and the old, so you will have to perform a clean install as advised here, which means wiping everything you had - so you won't be able to return to your Lollipop Stock through any recovery.
So chill some more and consider everything thoroughly.
Cheers.
bloody phones, dunno ewhat happened but seems like reinstalling the SROM for the 2nd time allowed me to boot into recovery, twrp and load the CROM. Only issue this time was that apparently stock gapps was too big for the phone so had to download and install the mini version.
Will see how CM13 goes and download the Temasek for install later once im happy everythings working.
Related
**Disclaimer** If you don't understand what follows, don't attempt this. I'm not responsible for you softbricking your device,
This is a quick guide for how to install the new android without losing anything. You'll need fastboot for this. Also, before doing this, be sure to download the supersu cwm update zip, and have it on your sdcard. Make sure you also already have a custom recovery installed (I did twrp, but i'm sure cwm will work just as well). I would also suggest having a backup done, through titanium backup and through recovery, just incase.
First, download the factory images for the n7 from google's website. Decompress them (if you're in windows, you'll need winrar or something similar.) After you decompress the archive, there'll be another one inside (image-nakasi-jop40c.zip), decompress this one as well. Under here, you'll see the .img files for all the partitions. For now, go up one directory. You'll also see here bootloader-grouper-4.13.img. Once you have all this, reboot into the bootloader.
Once you're in the bootloader, you can update the bootloader to the new version (this step isn't needed, but I did it anyways). Plug into your pc, and type fastboot devices. Make sure it's not blank. If it is, you have to update drivers. If you can see the device, open up a command prompt, and cd to the directory that has the bootloader-grouper file. Type the following:
fastboot flash bootloader-grouper-4.13.img
then, after it's done, type:
fastboot reboot-bootloader
Now, you'll be booted back into the bootloader, it'll say 4.13. On to the rom.
cd into the folder image-nakasi-jop40c (make sure you see the files system.img and boot.img before you continue. If you don't see them, the next steps will do nothing but erase your kernel and system parition.)
now, you see the image files. Type the following (still in the bootloader)
fastboot erase system
fastboot flash system system.img
wait until it completes, then type:
fastboot erase boot
fastboot flash boot boot.img
Once this is done, hit the volume up on the device until it shows recovery mode on the top. When it does, push the power key and you'll boot into your recovery (shouldn't be touched.) Inside here, flash the supersu cwm zip file, which'll flash the superuser binary, and supersu. Once this is done, do a factory reset (removing your data and cache.) Boot into the rom.
Once it's booted, you'll notice your internal sd card appears to be empty (mine did, I was worried at first.) For some odd reason, it moved the entire contents of my sdcard into a folder on it called 0. When you get back into android, simply move the folder all up one level so they're in the proper place. You now have the rom booted, rooted, with all your data. Now, you can do a titanium restore to get all your stuff back.
My first boot got stuck for some reason. if it happens to you, just hold the power button and hard reboot. (I did this on 2 devices, it only happened to one of them, so I figured I'd give you all warning.)
Links:
SuperSu binary: https://docs.google.com/open?id=0B7a8xHNJlpgTR0ZkR1pWZWR2VzA
Google Factory Images: https://developers.google.com/android/nexus/images
Thanks for this.
I flashed the 4.2 ota in the dev section and I lost root. Can I just flash the supersu binary in cwm to regain root?
Thanks for this.. Apparently you found out too a clean 4.2 isn't rootable via typical methods.
That SuperSU package did the trick. I have to remember to keep a SuperSU binary on hand for these kinds of situations that SuperUser fails..
jefferson9 said:
Thanks for this.
I flashed the 4.2 ota in the dev section and I lost root. Can I just flash the supersu binary in cwm to regain root?
Click to expand...
Click to collapse
Yes. If you do it though cwm, you're not using any exploits, you're just inserting the superuser binary and supersu.apk into the proper places on the rom. On any nexus device, any rom, this will root it.
mstrk242 said:
Once it's booted, you'll notice your internal sd card appears to be empty (mine did, I was worried at first.) For some odd reason, it moved the entire contents of my sdcard into a folder on it called 0. When you get back into android, simply move the folder all up one level so they're in the proper place.
Click to expand...
Click to collapse
DANGER WILL ROBINSON!!
The "odd reason" is called "multiple users" - add a second user and they get a folder called 10.
tehSmoogs said:
DANGER WILL ROBINSON!!
The "odd reason" is called "multiple users" - add a second user and they get a folder called 10.
Click to expand...
Click to collapse
Exactly.
If everything goes right we should have an AOSP prerooted build in about *looks at watch* 20 minutes.... Unless there is a compile error or SU error. *laff*
Back to watching the scrolling terminal window
Just got this working on a mac...
did not update bootloader(couldnt get it to)
other than that, same commands except all fastboots are ./fastboot on a mac
the only other trick is i needed the fastboot and abd files in the jop40c folder...seems to have worked like a charm....im deff on 4.2 with su installed... and it looks like my data is still there...once google is done restoring i'll know just how sucessfull it is, but so far, seems to work!!!
kwhee07 said:
Just got this working on a mac...
did not update bootloader(couldnt get it to)
other than that, same commands except all fastboots are ./fastboot on a mac
the only other trick is i needed the fastboot and abd files in the jop40c folder...seems to have worked like a charm....im deff on 4.2 with su installed... and it looks like my data is still there...once google is done restoring i'll know just how sucessfull it is, but so far, seems to work!!!
Click to expand...
Click to collapse
I did this all on linux, just kind of adapted the guide for windows. I figured all the linux users would understand how to do it on their own. Glad to know it's the same for mac as well.
OK where did they put the developer options? Not in settings on my 32GB 4.2 device
Never mind. This: http://www.androidpolice.com/2012/1...hidden-in-android-4-2-heres-how-to-find-them/
rootbrain said:
OK where did they put the developer options? Not in settings on my 32GB 4.2 device
Never mind. This: http://www.androidpolice.com/2012/1...hidden-in-android-4-2-heres-how-to-find-them/
Click to expand...
Click to collapse
Settings - about tablet - build number
push it a few times and it will enable dev options
You have .bat file in the package.
Why so complicated?
I downloaded 4.2 from here:
http://android.clients.google.com/p...gned-nakasi-JOP40C-from-JZO54K.094f6629.zipia
I then just flashed it from recovery via CWM.
Done.
CWM asked me if I wanted to maintain root and of course I chose the correct answer on this, so now my N7 is running on a rooted 4.2.
Here is my method:
1. Download official 4.1.2 from http://forum.xda-developers.com/showthread.php?t=1929270 and 4.2 OTA image from http://forum.xda-developers.com/showthread.php?t=1989188
2. Boot into CWM (i have CWM touch installed)
3. Clear data and install 4.1.2, don't forget to turn on root in the installer
4. reboot check that root is fully working
5. reboot into recovery install 4.2
6. before reboot CWM will ask to disable recovery flash and protect root. Ansver yes to both questions
I'm confused, it says if you are already on a custom rom, just flash as usual.
What makes this different?
I was on stock ROM rooted with some system modifications, and this wwadd the only way I could get the update working...
Sent from my Nexus 7 using xda app-developers app
mstrk242 said:
For some odd reason, it moved the entire contents of my sdcard into a folder on it called 0. When you get back into android, simply move the folder all up one level so they're in the proper place. You now have the rom booted, rooted, with all your data. Now, you can do a titanium restore to get all your stuff back.
Click to expand...
Click to collapse
So I'm at the step listed above. I have 4.2 on my device but I can't seem to find this "0" folder. I'm browsing the /sdcard folder via adb shell. Am I looking at the wrong place? Do I have have the incorrect permissions? Or might it not be there?
Thanks.
Ill have to wait until a rooted rom is created, I have no comp.
Sent from my Nexus 7 using XDA Premium HD app
can I install image-nakasi-jop40c.zip directly without upgrading bootloader?
Zuk. said:
So I'm at the step listed above. I have 4.2 on my device but I can't seem to find this "0" folder. I'm browsing the /sdcard folder via adb shell. Am I looking at the wrong place? Do I have have the incorrect permissions? Or might it not be there?
Thanks.
Click to expand...
Click to collapse
Not advisable to move this folder - if it got moved to a new location by the o/s then there's probably a good reason why - maybe like 4.2 introducing multiple users
Each user appears to get their own "home" directory created in /mnt/shell/emulated/
Default user dir is "0"
Second user dir is "10"
Each contain the standard dir's from 4.1 and earlier.
Travelawyer said:
Why so complicated?
I downloaded 4.2 from here:
http://android.clients.google.com/p...signed-nakasi-JOP40C-from-JZO54K.094f6629.zip
I then just flashed it from recovery via CWM.
Done.
CWM asked me if I wanted to maintain root and of course I chose the correct answer on this, so now my N7 is running on a rooted 4.2.
Click to expand...
Click to collapse
You had two extra characters at the end of your link, but I fixed it above and it's good to go for others in the future. Just flashed it in TWRP, it didn't ask if I wanted to maintain root, hit reboot when it was complete and lost root, so it doesn't work for everyone - good news is that all my data remained intact without having to resort to advanced restoring my data from a backup....
When I tried the SuperSU binary root flash trick, I finally got root back. But don't think it's as easy to get to recovery! I had to obtain the TWRP Recovery one more time since it wiped it and put in place a recovery that did absolutely nothing but reboot the device after a few minutes, so you'll have to
Code:
fastboot flash recovery openrecovery-twrp-2.3.1.1-grouper.img
to get TWRP back.... Hope that helped everyone!
Currently irate because I already typed all this then hit enter to be told I can only register once from this ip.
Any way...
Rooted vs98027a Android 4.4.2 via Stump Root
Used AutoRec which installed TWRP 2.7.00
Backed up Stock Rom
Mount button is missing
Rebooted into Stock to transfer backup to PC and place "cm-12-20150603-NIGHTLY-vs980.zip" as well as Lp gapps.
Rebooted back into TWRP
Wiped, then Installed the CM Nightly, wiped cache and rebooted.
Stuck in LG Boot loop.
Use buttons to boot back into TWRP, open Restore and It's just a blank navigation window.
TWRP just became ****ing worthless
Tried to wipe and possibly install same CM again. Still boot looping.
Tried getting to download mode, but it reboots before installing driver.
I have not a clue as to what to do next.
I can't get it to mount.
ADB Sideload Fails.
Terminal Command lets me select a blank navigation window.
And my original file structure is in like sdcard/0/0/0/0/0/0/0/0/ etc.
Please help, or at least redeem CM and TWRP's value somehow, because this is bs.
I sort of fixed it.
Restore showed up blank, because within the many /0/0/0/0/0/0/0/0 a new TWRP folder would be made or course containing nothing.
I also learned the adb is this magnificent goddess that can do things even when your phone can't.
Throughout further reading I glimpsed upon something about "loki" files that aren't compatible with specific versions of twrp or something. So If you've also been through this and still feel brave enough to flash a custom, then make sure you get the newest version of twrp...
As for the Restore issue, assuming you have a backup saved on pc, wipe everything then adb push the whole file (TWRP/BACKUPS/BLAHBLAH/BLAUGHESDIHF) to /sdcard/.... then it should show up in restore, if it doesn't then use file manager to place it in the right TWRP directory... You can also use the file manager to move the restore folder to the "correct" twrp folder if you don't have it backed up.
Hello there!
Today, after a bit of tinkering around I managed to get my OnePlus 3 in a decrypted state without losing data!
However, this is NOT a method where your data will remain on the phone, it requires you to copy a backup to your PC and then copy everything back + fix permissions. In this guide you'll completely wipe/reset your phone prior to restoring everything.
FAQ:
Q: Why do I need an undecrypted phone?
A: So far (as of today, 06.07.2016) multiboot will not work on encrypted phones. That's probably the only reason why you'll ever want to decrypt your phone.
Q: Will updating the ROM force encryption again?
A: If you're using OxygenOS (or another encryption forcing ROM), yes. However if you flash the Full ROM ZIP and immediately after that SuperSU (DO NOT USE SYSTEMLESS OR IT WILL ENCRYPT AGAIN!!!) WITHOUT REBOOTING it'll not encrypt the device again. (Thanks to @JumboMan)
Q: I've followed your guide but my phone got encrypted again!
A: You've probably used the Systemless SuperSU version which does indeed not prevent your device from being encrypted again. Use the normal version available HERE.
You'll need:
A PC (obviously)
Unlocked OnePlus 3 (will probably work on other OnePlus phones, not tested!)
TWRP Recovery (follow THIS LINK for a guide)
About 50 GB of free space on your PC (depends on how much data you have on the phone)
ADB and Fastboot drivers installed on your PC (to get those connect your OP3 to your PC, as storage choose MTP, open the emulated OnePlus CD-Drive and install those drivers)
(Optional) 15 Seconds ADB Installer
A bit of time, roughly 30 minutes to 1 hour
!!!DISCLAIMER!!!
I'M NOT RESPONSIBLE FOR ANYTHING YOU'RE ABOUT TO DO HERE, THIS GUIDE IS PURELY WRITTEN "OUT OF MY HEAD" AND I CANNOT CONFIRM ANY OF THE FOLLOWING STEPS ANYMORE!!!!
ONLY DO THIS IF YOU KNOW HOW TO RECOVER FROM A HALF-INSTALLED OR COMPLETELY WIPED SYSTEM!!!
How To:
READ AND ACKNOWLEDGE THE DISCLAIMER ABOVE!
Done? Are you really sure? ... Okay!
If you don't need your data backed up simply start at Step 10 and ignore the restore parts after that.
Still on OxygenOS (or any other ROM) make sure you've enabled ADB in Developer Options and connected + allowed your PC at least one time, else ADB in TWRP will not work.
If you have Titanium Backup, create a backup of all your apps before starting. Just in case, you never know...
Once done boot into TWRP (see above for an installation guide)
Create a normal TWRP backup
Type in "adb devices" to check if you're allowed to use ADB inside TWRP. If it says "unauthorized" refer to Step 1 again.
Once done open up a CMD on your PC and cd to the directory you want all your backup-files to be (or navigate via Windows Explorer to the folder, hold "Shift", right-click and choose "Open command window here...")
Type in "adb pull /data/media" and wait. Depending on the size this can take a few minutes.
After that's done make sure all your files are here and ADB is not reporting any skipped files.
Checked all your files? Okay!
In TWRP choose "Reboot" and "Bootloader". This will put your phone into Fatboot mode.
Type in "fastboot devices" to check if your phone is recognized. If not go into device manager, find the Google Bootloader drivers and install those.
NOW IS YOUR LAST CHANCE TO MAKE SURE EVERYTHING'S BACKED UP AND THERE!
Next type in "fastboot format userdata" and hit enter. This will completely wipe your device.
Boot back into TWRP by using the volume rocker and the Power Button.
ADB is probably not working now (will only report "unauthorized"), MTP however still works. Copy the TWRP folder we backed up earlier onto the device again.
Once copying finished restore the backup and reboot into recovery again. You're now able to use ADB due to the adbpub.key being present again. (You could've done this earlier but it's easier that way.)
Copy the rest back onto the device with "adb push / /data/media". (I'm not really sure if this command is right, beware!)
Now type "adb shell chown -R media_rw:media_rw /data/media" to fix issues later in the ROM.
You're basically finished now! Simply reboot and wait till it boots up again. If you're getting stuck at a "Wrong PIN" or "Wrong Pattern" screen SEE THIS COMMENT I made in another thread.
Finished!
As said, I'm not sure if I forgot something here or not. However I think I got everything covered
Thank you. This was a much needed guide for all of us
Sent from my ONEPLUS A3003 using Tapatalk
Nice
Noob questions: is the decrypted OS faster? Performances of the phone are the same? What about updates (any update will crypt it again?
Thanks for any feedback!
Sent from my OnePlus3 using XDA Labs
IlD4nX said:
Noob questions: is the decrypted OS faster? Performances of the phone are the same? What about updates (any update will crypt it again?
Thanks for any feedback!
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Performance is about the same.
I have no idea if updates will crypt it again, I think not tho? Not sure.
ota updates might encrypt it again if you're on stock. depending if there's a new kernel. the kernel I think forces encryption. so we need a modified boot img to disable forced encryptions. or use a custom kernel that disables force encryption.
If you're on a custom rom based on aosp/cm. most of them doesn't force encryption. so there's no need to worry.
Sent from the moon and back
Thanks for the guide, will this wipe my internal storage?
daavid1995 said:
Thanks for the guide, will this wipe my internal storage?
Click to expand...
Click to collapse
Yes, however the guide shows you how to get a backup of ALL your files before anything gets wiped.
Ajo, und servus aus Österreich
IlD4nX said:
Noob questions: is the decrypted OS faster? Performances of the phone are the same? What about updates (any update will crypt it again?
Thanks for any feedback!
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Yes. updates will encrypt data again.
if you want to remain non encrypted after update then following procedure.
1. download full rom zip (not ota zip)
2.flash full update zip
3.without rebooting after flashing update just flash SuperSU zip. SuperSU will patch your boot img to remain in non encrypted state.
Proof- myself tried it on 3.2.0 update and it works without any problem
JumboMan said:
Yes. updates will encrypt data again.
if you want to remain non encrypted after update then following procedure.
1. download full rom zip (not ota zip)
2.flash full update zip
3.without rebooting after flashing update just flash SuperSU zip. SuperSU will patch your boot img to remain in non encrypted state.
Proof- myself tried it on 3.2.0 update and it works without any problem
Click to expand...
Click to collapse
Added to the OP Thanks for testing!
Thanks, i will try
Dere haha :fingers-crossed::good:
EpicLPer said:
Yes, however the guide shows you how to get a backup of ALL your files before anything gets wiped.
Ajo, und servus aus Österreich
Click to expand...
Click to collapse
maybe stupid questions, but not clear for me:
is there a negative point decrypting the phone or are there any risks?
will decrypting have an effect on the security of the phone?
odooo said:
maybe stupid questions, but not clear for me:
is there a negative point decrypting the phone or are there any risks?
will decrypting have an effect on the security of the phone?
Click to expand...
Click to collapse
As long as you're not an "international searched criminal" where the FBI tries to break into your phone then, no
I'd say it is a bit less secure but who cares, anyone who wants access to your phone somehow gets it anyways, TWRP isn't helping here either since anyone can simply boot into recovery and recover all files from there nonetheless.
Decryption risks are only when you're not good at backing up your data, else there are no risks of doing so.
@EpicLPer:
17. Copy the rest back onto the device with "adb push / /data/media". (I'm not really sure if this command is right, beware!)
Click to expand...
Click to collapse
"adb push / /data/media" doesnt work for me. Can somebody help? I restored the TWRP-Backup and only need to copy the rest on the device.
Edit: I did it in another way, copied all files manually.
Can someons dcrypt this
IzpG+nubzE2m3krvbos0lVDLANkIkiekZt209MYU12Vzny8WNOS7o4JGNoVAm41e/44IYPHmh
0Y7NnLW1JghbWJwbzL1WIpQw7nkzQoH9dEwvTiloTg5BI1u9TYRExzLGQEDUqN2hjq1G5cn
CqDmYoQnMs2bMiuajZweq9ZDC7gLruq6dse0L96gzZFoC/33lF0h1mEh7SBgW3FrcsjhRQ==
Sent from my SM-N910P using XDA-Developers mobile app
Worked, Thanks
How can I check if my device is decrypted or encrypted?
odooo said:
How can I check if my device is decrypted or encrypted?
Click to expand...
Click to collapse
Go to Settings > Device Security and check if it says encrypted or if it gives you the option to encrypt. If second, you know it's decrypted.
Can somebody do some benchmarks? I am really curious whether it makes a difference or not.
from what I've heard it makes a big difference in sequential rw speeds, which are actually pretty important on android.
Will it wipe my rom too?? Or just internal storage??
---------- Post added at 04:03 PM ---------- Previous post was at 03:31 PM ----------
EpicLPer said:
Hello there!
Today, after a bit of tinkering around I managed to get my OnePlus 3 in a decrypted state without losing data!
However, this is NOT a method where your data will remain on the phone, it requires you to copy a backup to your PC and then copy everything back + fix permissions. In this guide you'll completely wipe/reset your phone prior to restoring everything.
FAQ:
Q: Why do I need an undecrypted phone?
A: So far (as of today, 06.07.2016) multiboot will not work on encrypted phones. That's probably the only reason why you'll ever want to decrypt your phone.
Q: Will updating the ROM force encryption again?
A: If you're using OxygenOS (or another encryption forcing ROM), yes. However if you flash the Full ROM ZIP and immediately after that SuperSU WITHOUT REBOOTING it'll not encrypt the device again. (Thanks to @JumboMan)
You'll need:
A PC (obviously)
Unlocked OnePlus 3 (will probably work on other OnePlus phones, not tested!)
TWRP Recovery (follow THIS LINK for a guide)
About 50 GB of free space on your PC (depends on how much data you have on the phone)
ADB and Fastboot drivers installed on your PC (to get those connect your OP3 to your PC, as storage choose MTP, open the emulated OnePlus CD-Drive and install those drivers)
(Optional) 15 Seconds ADB Installer
A bit of time, roughly 30 minutes to 1 hour
!!!DISCLAIMER!!!
I'M NOT RESPONSIBLE FOR ANYTHING YOU'RE ABOUT TO DO HERE, THIS GUIDE IS PURELY WRITTEN "OUT OF MY HEAD" AND I CANNOT CONFIRM ANY OF THE FOLLOWING STEPS ANYMORE!!!!
ONLY DO THIS IF YOU KNOW HOW TO RECOVER FROM A HALF-INSTALLED OR COMPLETELY WIPED SYSTEM!!!
How To:
READ AND ACKNOWLEDGE THE DISCLAIMER ABOVE!
Done? Are you really sure? ... Okay!
If you don't need your data backed up simply start at Step 10 and ignore the restore parts after that.
Still on OxygenOS (or any other ROM) make sure you've enabled ADB in Developer Options and connected + allowed your PC at least one time, else ADB in TWRP will not work.
If you have Titanium Backup, create a backup of all your apps before starting. Just in case, you never know...
Once done boot into TWRP (see above for an installation guide)
Create a normal TWRP backup
Type in "adb devices" to check if you're allowed to use ADB inside TWRP. If it says "unauthorized" refer to Step 1 again.
Once done open up a CMD on your PC and cd to the directory you want all your backup-files to be (or navigate via Windows Explorer to the folder, hold "Shift", right-click and choose "Open command window here...")
Type in "adb pull /data/media" and wait. Depending on the size this can take a few minutes.
After that's done make sure all your files are here and ADB is not reporting any skipped files.
Checked all your files? Okay!
In TWRP choose "Reboot" and "Bootloader". This will put your phone into Fatboot mode.
Type in "fastboot devices" to check if your phone is recognized. If not go into device manager, find the Google Bootloader drivers and install those.
NOW IS YOUR LAST CHANCE TO MAKE SURE EVERYTHING'S BACKED UP AND THERE!
Next type in "fastboot format userdata" and hit enter. This will completely wipe your device.
Boot back into TWRP by using the volume rocker and the Power Button.
ADB is probably not working now (will only report "unauthorized"), MTP however still works. Copy the TWRP folder we backed up earlier onto the device again.
Once copying finished restore the backup and reboot into recovery again. You're now able to use ADB due to the adbpub.key being present again. (You could've done this earlier but it's easier that way.)
Copy the rest back onto the device with "adb push / /data/media". (I'm not really sure if this command is right, beware!)
Now type "adb shell chown -R media_rw:media_rw /data/media" to fix issues later in the ROM.
You're basically finished now! Simply reboot and wait till it boots up again. If you're getting stuck at a "Wrong PIN" or "Wrong Pattern" screen SEE THIS COMMENT I made in another thread.
Finished!
As said, I'm not sure if I forgot something here or not. However I think I got everything covered
Click to expand...
Click to collapse
Will it wipe my rom too?? Or just internal storage??
Okay so I got my oneplus 3t today and I updated it to Nougat via the ota file all good so far. I then decided that I wanted to install a custom rom so I downloaded twrp supersu etc everything needed to root and install the rom. Here's where it went wrong in knowingly I downloaded the wrong twrp flashed it and it would just hang at the flash screen for twrp. Anyway after hours of trying to install a recovery I managed to get a stock one to semi work, now it turns out I don't know how I did it but my phone won't even boot it just turns on and goes straight to fastboot mode. I managed to get a stock recovery semi working but it won't let me install the stock rom from internal storage and I've tried updating through adb and it will hang at a random percentage for a good 20 mins and then just fail. Really need some help here it would be great, thanks
Hi,
If you can get into fastboot mode then the best recourse is through there. Hope you properly OEM unlocked your device.
First of all, you MUST have the latest adb/fastboot binaries and FOR SURE have the correct drivers.
Follow the links on this XDA article to download the latest adb and fastboot binaries: https://www.xda-developers.com/google-releases-separate-adb-and-fastboot-binary-downloads
This is the link for the Windows binary: https://dl.google.com/android/repository/platform-tools-latest-windows.zip
Extract all the contents of the zip file in a folder on your PC.
Then, also make sure to have THE CORRECT twrp, 3.0.2.0 or 3.0.3.0. This is the link but currently it is down: https://twrp.me/devices/oneplus3t.html
Download THE IMAGE, NOT FLASHABLE ZIP and put it in the same folder as the android platform tools above.
Finally, download the latest complete 3T firmware from OnePlus from this link: http://downloads.oneplus.net/devices/oneplus-3t/
I STRONGLY recommend not to use an update zip, even a full ROM update zip as that one might not include certain firmware images.
Put THE ZIP on the same folder as the others, DO NOT EXTRACT ANYTHING.
On your PC, open a command prompt in the folder where you extracted the android platform tools and run the following: fastboot boot twrp-3.0.3-0-oneplus3t.img (assuming you downloaded the 3.0.3 version of twrp).
Your phone will TEMPORARILY accept the twrp recovery as a boot image and boot from there. NOTHING IS BEING PERMANENTLY WRITTEN AT THIS TIME.
After that, enter TWRP's Wipe menu and wipe system, data and cache.
Finally, use TWRP's Advanced menu and enter adb sideload mode. Once there slide that slider to the right to enable adb mode and return to your PC and enter the following command in the command prompt:
adb sideload OnePlus3TOxygen_28_OTA_029_all_1612131737_17e7161d2b234949.zip (assuming you downloaded the 3.5.4 binary from OnePlus).
TWRP should properly flash the OnePlus ROM and hopefully, return you to proper function. You can then update back to Nougat.
Hope that helped!
Yeah that sorted it thanks a lot
Use the emergency tool for OP3T and start from scratch:
https://forums.oneplus.net/threads/unbrick-guide-oneplus-3t.481214/
@KeyperOS
I'm trying to follow this guide, but did you miss something out here?
On your PC, open a command prompt in the folder where you extracted the android platform tools and run the following: fastboot boot twrp-3.0.3-0-oneplus3t.img (assuming you downloaded the 3.0.3 version of twrp).
Your phone will TEMPORARILY accept the twrp recovery as a boot image and boot from there. NOTHING IS BEING PERMANENTLY WRITTEN AT THIS TIME.
Click to expand...
Click to collapse
Once I do "fastboot boot twrp" and get a success, then what?
Do I need to somehow reboot the phone into TWRP - because that didn't happen on its own.
If so, how do I do this?
Thanks,
jackmacbunton said:
Yeah that sorted it thanks a lot
Click to expand...
Click to collapse
Glad that sorted it out
PugRallye said:
@KeyperOSI'm trying to follow this guide, but did you miss something out here?
Once I do "fastboot boot twrp" and get a success, then what? Do I need to somehow reboot the phone into TWRP - because that didn't happen on its own. If so, how do I do this? Thanks,
Click to expand...
Click to collapse
My instructions while detailed are not step-by-step. I expect the person reading them to have their PC configured correctly and at least a vague idea of what they're doing.
So, assuming you put the correct TWRP image (my command uses the name of the image for TWRP 3.0.3.0, you MUST alter it to reflect the actual image's filename if it's not that) on the same folder as the fastboot binary then yeah, the command
fastboot boot twrp-3.0.3-0-oneplus3t.img
should have made your phone reboot and enter into the TWRP image that you had on your PC.
If it didn't then you did sth else wrong before that.
Either you didn't OEM unlock your phone when you still could or you didn't use the android platform tools that I linked or you don't have the correct ADB drivers installed on your PC.
Start from there.
Hope that helped!
Thanks for your help @KeyperOS - I know where I went wrong...
To save some time, when I tried to reboot into TWRP, I typed "fastboot boot " then I dragged and dropped the TWRP img file onto that line in the cmd window (rather than typing the filename manually) - when you do that, it appears to include the full path to the img - it was that that was causing the problem.
When I typed the TWRP filename manually, it worked.
The only thing that caught me out was after I'd installed the ROM (via adb sideload) I tried to reboot the device from TWRP recovery - this seemed to just hang. In the end I just powered off the phone using the power key, then powered it back up as per usual.
Checked that the phone booted to the first of the setup screens, then powered off/booted into fastboot mode, relocked the bootloader and it seems to be OK.
I'm now back on 3.5.4 again, which was what I was trying to do...
4.0.0/1 had felt a bit laggy, and I'd sensed some issues with wifi and BT, I can now run 3.5.4 and see how it compares - was I just imagining it?
Thanks again for the guide and your help - I really appreciated it
@PugRallye
Windows' command prompt has an autocomplete feature. If you want it to add the name of a file, type a couple letters and then present TAB, it's gonna complete the filename itself and if it's the wrong file you can keep tapping tab to cycle through all the options.
Really glad it worked out Btw [emoji4]
In my experience, 3.5.4 was great but 4.0 is a step up in both battery life, which IME is amazing and features, with it I almost didn't need root and certainly don't need xposed which was a first.
Where I can find official ROM for asus me375cl based on android 5.1.1?
Finaly, i find zip with official ROM on 4pda:
4pda-ru/forum/index.php?showtopic=799982
(put '.' (dot) instead '-' in url)
A special thank to alexoid79 for instruction.
little_pindos said:
Finaly, i find zip with official ROM on 4pda:
4pda-ru/forum/index.php?showtopic=799982
(put '.' (dot) instead '-' in url)
A special thank to alexoid79 for instruction.
Click to expand...
Click to collapse
Thank you so much for posting where you found this, this is exactly what I needed!!! You saved my tablet, it is much appreciated! :good:
Flashing Factory Image
The following instructions worked for me when trying to reflash the factory firmware for the ATT Asus MemoPad 7 LTE (ME375CL). I did originally try using the Asus Flash Tool and the raw firmware file (link below) but the tool said it could not unzip the package for some reason or another. So the steps below show how I did it using ADB with fastboot.
I ASSUME NO LIABILITY SHOULD THIS GO WRONG FOR YOU! However, it probably shouldn't matter if you are bricked, I doubt it will make it any worse Either way, I will not replace your tablet or be responsible for troubleshooting it should you mess it up more...
This scenario is based on the tablet stuck on the Asus boot screen and not going any further. I was trying some in depth rooting attempts and bricked it badly. I was then trying to install a custom recovery and that is why I could not reset it and bricked it.
PRE-REQS:
1. ADB installed - Download: https://drive.google.com/open?id=0B0fKccJIuWsna04wMjY1eG9YREU
2. Asus Drivers installed
3. Firmware - Download: https://drive.google.com/open?id=0B0fKccJIuWsnWGhwYzA0Vkluc2s (file is 1 Gb + in size, may take a bit)
SETUP:
If you already have a working ADB setup, do not download the one above. If you are using the one above, I extracted the folder into my C: drive, so the path for ADB would be C:\adb (to keep it simple and less typing).
MAKE SURE THE ASUS DRIVERS ARE INSTALLED! If you have plugged the tablet in to a pc before, they should already be there. Otherwise search, download and install the appropriate drivers.
INSTRUCTIONS:
Extract the firmware zip file to somewhere easily accessible like your desktop. In there, you should see the boot.img, recovery.img and system.img files, copy/paste those files to your ADB folder (for easier typing later on). There are also additional files like these but start with "unsigned_", do NOT use those!
1. Ensure you probably have at least 30% battery charge, I would still recommend more though.
2. Put the tablet in Fastboot mode by ensuring the tablet is completely powered down and then press/hold the VOLUME UP and POWER keys at the same time. When the Asus screen appears, let go of the POWER button but continue to hold the VOLUME UP button. Let go of the VOLUME UP button when the fastboot screen appears.
3. Plug the tablet in to the computer and then open a CMD prompt as administrator.
4. The following uses the ADB downloaded and placed in the folder as listed above, you may need to adjust the location path as needed if you already have ADB installed or located in a different path.
Type in the following without the quotes: "cd c:\adb" (this will change the path to the ADB files for the CMD prompt)
Type in the following without the quotes: "fastboot devices" (you should then see a device listed)
Type in the following without the quotes: "fastboot flash recovery recovery.img" (flashes the factory recovery image)
Type in the following without the quotes: "fastboot flash system system.img" (flashes the factory system image, may take a while to flash)
Type in the following without the quotes: "fastboot flash boot boot.img" (flashes the factory boot image)
5. Once those 3 images have been flashed, you should have seen a message that says "OKAY" after each one. You should be fine as long as you do not have any red error messages on your tablet.
Type in the following without the quotes: "fastboot reboot" (reboots device normally)
6. If all goes well, it should now boot to the Asus screen and then go to the ATT screen. If so, it will stay on the ATT screen for a while, just wait it out. Mine took about 12-15 minutes and then it opened to the new setup screen to set the tablet up as if its new!
This is how I was able to recover my bricked tablet, hopefully it can help someone else that may run into this.
John, thank you for the write-up. Just bought my ME375CL with 4.4.4.4.
When I try to flash the recovery partition, I get the following error:
C:\Users\Myself\Desktop\adb>fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (11312 KB)...
OKAY [ 1.047s]
writing 'recovery'...
(bootloader) Official image.
FAILED (remote: flash_cmds error!
)
finished. total time: 2.344s
Click to expand...
Click to collapse
and on the tablet's screen:
FASTBOOT CMD WAITING...
RECEIVE DATA...
E:recovery flash failed!
FLASH FAILED!
RESULT: FAIL(flash_cmds error! )
Click to expand...
Click to collapse
I haven't tried the other commands for system.img or boot.img as I don't want to do anything out of order from the write-up. Ever run into this?
The firmware in the download is 5.1.1, not 4.4.4. That is probably the issue. If you are running good on that, I would try rooting it instead. If you are just wanting to upgrade, you will need to have an active AT&T SIM in the tablet to upgrade over the air. I am not sure if there is a flashable upgrade or not somewhere.
Oh ok John. I misread the title of the thread. I thought it was for updating from 4 to 5.
Quick question then: Is it possible, using the adb / fastboot tools, to backup the current 4.4.4.4 before I allow the tablet to update to Lollipop? After reading around, I understand that Lollipop can't be rooted but I have no real concern for it. But just in case I need the tablet to do something else in the future, I'd like to be able to return it to kit kat to be able to root.
Once you upgrade to lollipop, there is no downgrading for this tablet. There really is not much development for this device. I have kind of been working on a lollipop root when I can. Between my limited time and knowledge of android, I can't promise anything.
Overcoming red messages?
Dear John,
Thank you very much for your help. My device runs KitKat 4.4, I can't upgrade over the air, as I damaged my sim slot struggling to remove a stuck nano sim, which I had inserted before I realized that it required a micro sim. (I'd wrongly assumed that by now the world uses only nano).
I followed the steps above, which you wrote so clearly for lay men, thank you a lot.
The flash for recovery.img and system.img worked fine (no red error messages on device).
The flash for boot.img had a red error message.
Might you have an idea or workaround on how I can address this?
If it refuses, is it possible to factory reset?
Thank you very much again for any words of advice and kind regards.
Gor- said:
Dear John,
Thank you very much for your help. My device runs KitKat 4.4, I can't upgrade over the air, as I damaged my sim slot struggling to remove a stuck nano sim, which I had inserted before I realized that it required a micro sim. (I'd wrongly assumed that by now the world uses only nano).
I followed the steps above, which you wrote so clearly for lay men, thank you a lot.
The flash for recovery.img and system.img worked fine (no red error messages on device).
The flash for boot.img had a red error message.
Might you have an idea or workaround on how I can address this?
If it refuses, is it possible to factory reset?
Thank you very much again for any words of advice and kind regards.
Click to expand...
Click to collapse
Sounds odd that it did 2 out of 3 flashes. After you flashed those and rebooted, are you still on KitKat or did it actually update to Lollipop (5.1)? I ask because I assume the system image that flashed would be the operating system.
I still want to stress that this post is for recovering a bricked tablet that will not boot at all. I would not suggest using this as a flashing upgrade as I do not know if it will truly work. If you are still on KK (even after flashing) you could try installing the Asus Flash Tool and use the raw firmware that you downloaded and try it that way. It did not work for me so that is why I used fastboot. It might work for you.
Here is a link for the Asus Flash Tool:
https://drive.google.com/open?id=0B0fKccJIuWsndXJUa1FEbXVzTjA
johnkirchner said:
Sounds odd that it did 2 out of 3 flashes. After you flashed those and rebooted, are you still on KitKat or did it actually update to Lollipop (5.1)? I ask because I assume the system image that flashed would be the operating system.
I still want to stress that this post is for recovering a bricked tablet that will not boot at all. I would not suggest using this as a flashing upgrade as I do not know if it will truly work. If you are still on KK (even after flashing) you could try installing the Asus Flash Tool and use the raw firmware that you downloaded and try it that way. It did not work for me so that is why I used fastboot. It might work for you.
Here is a link for the Asus Flash Tool: ]
Click to expand...
Click to collapse
As a follow up on your question above, Tab restart stalled at a screen (after the Asus logo), presenting some options to do recovery, reboot, factory reset, etc. (factory reset did not help), and red error messages at bottom.
To the GOOD news for anyone interested. I used the Asus Flash Tool and the firmware zip for 5.1.1 (many thanks for the advice).
Note: Tool did not install correctly on Win10 pc, citing error in installing some devcon.exe or similar file (guess that may be a firewall/antivirus issue).
Flash tool took some 15 or so mins unzipping firmware, after which I saw some action on the tab. Another 15 mins, and it rebooted to the At&t logo, stayed here for another 15 mins and unraveled a whole new device on Android 5.1
Glad to hear it worked for you and that I guess you can use this to flash upgrade from kitkat!
There is working way to root our device on lollipop! It is for the other Asus model, but it works for our
http://4pda.ru/forum/index.php?s=&showtopic=640814&view=findpost&p=53047686
I will check this out!
The root works, installed without any issues and verified with a root checker!
Here is a direct download from my Drive folder: https://drive.google.com/open?id=0B0fKccJIuWsnN21ZbnZpc2F6b1E
1. Download the file above.
2. Extract the zip contents.
3. Plug your ME375CL tablet in to pc via usb cable.
4. Make sure you have enabled Developer Mode and allowed USB Debugging first!
5. Open the folder you extracted and double click the "Root-One-Click.cmd" file.
6. It should reboot to fastboot mode and flash the needed files and then reboot again.
You should now have root access. Verify this by installing a root checker app from the play store. Keep in mind, it may say root not installed on the first run. Sometimes it will take a moment for superuser to initially run or prompt for access.
Side note: the root uninstall did not seem to work, got an error...but oh well, the point is to have root!
Thanks go to @little_pindos for finding this file...you are a rockstar!
Anyone get xposed on LP?
ATT Boot Up Sound
Tired of the ATT boot sound? If you used the rooting method above, then you can get rid of the annoying ATT startup sound by doing the following:
1. Install a Root Browser app (I recommend Rom Toolbox Pro, it has a built in file manager)
2. Navigate to the following path:
root/system/media
3. Find the file named "powerup.wav"
4. Simply rename the file by adding .bak to the end (ex - powerup.wav.bak)
5. Make sure it took the name change (some file managers have issues with that)
6. Reboot and see if it got rid of the sound!
You can also use your own startup sounds as long as they are in a .wav format, I believe. Make sure that the name of the file is powerup.wav.
You can also change your boot animation with "boot animation" app.
Best tweak IMO is adding "ro.config.low_ram=true" to build prop, or installing the low ram device xposed module if we can get it to work (both do the same thing). You gain about 100mb more free RAM on average.
TimmyP said:
You can also change your boot animation with "boot animation" app.
Best tweak IMO is adding "ro.config.low_ram=true" to build prop, or installing the low ram device xposed module if we can get it to work (both do the same thing). You gain about 100mb more free RAM on average.
Click to expand...
Click to collapse
I'll have to try that!
AT&T no longer has updates in system for this tablet
Gor- said:
Dear John,
Thank you very much for your help. My device runs KitKat 4.4, I can't upgrade over the air, as I damaged my sim slot struggling to remove a stuck nano sim, which I had inserted before I realized that it required a micro sim. (I'd wrongly assumed that by now the world uses only nano).
I followed the steps above, which you wrote so clearly for lay men, thank you a lot.
The flash for recovery.img and system.img worked fine (no red error messages on device).
The flash for boot.img had a red error message.
Might you have an idea or workaround on how I can address this?
If it refuses, is it possible to factory reset?
Thank you very much again for any words of advice and kind regards.
Click to expand...
Click to collapse
AT&T removed the last update for this tablet months ago and no longer supports it. ASUS states AT&T has all the updates. Total cluster.