Database Develop

[XT1097 AT&T] Last Time Flashing Failed Bootloop

Well.. I may have messed up beyond belief.
I accidentally ordered the AT&T variant instead of going with XT1095, and instead of returning it, I figured I'd unlock it and convert.
To my error, I tried CF-Auto-Root-victara-victararetbr-xt1097 with a locked bootloader and I was put into a bootloop with the error "Fastboot Reason: Last time flashing failed"
Am I screwed? Are there ways to fix this new $325 brick?
I just remembered, I have my old XT1095 IMEI and bootloader code. Is there anyway to flash my XT1097 with those numbers so my phone can pretend to be my old 'Pure' edition and be able to unlocked?

Have you check unlocking the bootloader from motorola site? I heared xt1097 is also unlocking now via motorola website, you can also try these lines hope it will help you reboot in fastboot first then type these:
Fastboot reboot-bootloader
Fastboot oem fb_mode_set
Fastboot erase cache
Fastboot oem fb_mode_clear
Fastboot reboot
Hope you will get the device back running.. If these didnt help kindly get back here.. And dont try any imei tweak etc you will hard brick that

Salik Iqbal said:
Have you check unlocking the bootloader from motorola site? I heared xt1097 is also unlocking now via motorola website, you can also try these lines hope it will help you reboot in fastboot first then type these:
Fastboot reboot-bootloader
Fastboot oem fb_mode_set
Fastboot erase cache
Fastboot oem fb_mode_clear
Fastboot reboot
Hope you will get the device back running.. If these didnt help kindly get back here.. And dont try any imei tweak etc you will hard brick that
Click to expand...
Click to collapse
I've tried what you posted to no avail.
I've been trying to download VICTARA_ATT_XT1097_5.1_LPE23.32-21.9_cid1_CFC.xml.zip or VICTARA_ATT_XT1097_5.1_LPE23.32-21.2_cid1_CFC.xml.zip from FileFactory, but because i'm using the "Slow Speed" download(50Kb/s), it keeps failing, so I haven't even been able to try flashing the official ATT Victara firmware.
I'm almost positive it's because the partition was flashed over... so I'm hoping if I can get one of these files downloaded, I can try flashing the original gpt.bin and it boot fine..
Any other ideas would be extremely helpful.
If this helps, this is all the info from my bootloader
AP Fastboot Flash Mode (S)
60.16 (sha-496ce05,c2015-04-02 18:55:00)
CPU: MSM8974AC ES1.1
eMMC: 32GB Samsung RV=07 PV=0B TY=57
DRAM: 2048MB Elpida S8 SDRAM DIE=4GB
Battery OK
Device is LOCKED. Status Code: 0
Software status: Official

Fastboot getvar all
Paste the output pls

Salik Iqbal said:
Fastboot getvar all
Paste the output pls
Click to expand...
Click to collapse
I just need VICTARA_ATT_XT1097_5.1_LPE_23.32-21.9 gpt.bin if I do belive so myself. Teach me if i'm wrong, I truly am interested in learning this stuff!
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 6016
(bootloader) product: victara
(bootloader) secure: yes
(bootloader) hwrev: 0x82BF
(bootloader) radio: 0x1
(bootloader) emmc: 32GB Samsung REV=07 PRV=0B TYPE=57
(bootloader) ram: 2048MB Elpida S8 SDRAM DIE=4Gb
(bootloader) cpu: MSM8974AC ES1.1
(bootloader) serialno: TA449074CQ
(bootloader) cid: 0x0001
(bootloader) channelid: 0x84
(bootloader) uid: 6FD5BD0D0B000000000000000000
(bootloader) unlocked: no
(bootloader) iswarrantyvoid: no
(bootloader) mot_sst: 0
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: ***************
(bootloader) meid:
(bootloader) date: 02-11-2016
(bootloader) sku: XT1097
(bootloader) iccid:********************
(bootloader) cust_md5: ********************************
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sat Jun 28 20:20:35 UTC 2014"
(bootloader) ro.build.fingerprint[0]: motorola/victara_att/victara:5.1/L
(bootloader) ro.build.fingerprint[1]: PE23.32-21.9/3:user/release-keys
(bootloader) ro.build.version.full[0]: Blur_Version.23.16.9.victara_att.
(bootloader) ro.build.version.full[1]: att.en.US
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband[0]: MSM8974BP_4235210.110.09.11R VICTARA_A
(bootloader) version-baseband[1]: TT_CUST
(bootloader) kernel.version[0]: Linux version 3.4.42-gff6f5d9 ([email protected]
(bootloader) kernel.version[1]: ilclbld32) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Tue Sep 29 04:22:36 CDT 2015
(bootloader) sdi.git: git=MBM-NG-V60.16-0-g582b967
(bootloader) sbl1.git: git=MBM-NG-V60.16-0-gfd10553
(bootloader) rpm.git: git=MBM-NG-V60.16-0-gc54d917
(bootloader) tz.git: git=MBM-NG-V60.16-0-g04e322b
(bootloader) aboot.git: git=MBM-NG-V60.16-0-g496ce05
(bootloader) qe: qe 0/0
(bootloader) ro.carrier: att
all: listed above
finished. total time: 0.101s

you need full flash, not just gpt.bin.. if you did flashing this gpt only, you will have dead bricked device.. check the pvt msg i gave you fast download link there.. download rsd lite, unzip that and flash the full stock rom.. good luck!

Salik Iqbal said:
you need full flash, not just gpt.bin.. if you did flashing this gpt only, you will have dead bricked device.. check the pvt msg i gave you fast download link there.. download rsd lite, unzip that and flash the full stock rom.. good luck!
Click to expand...
Click to collapse
THANK YOU! I really appreciate it, you have no idea how happy I am.
RSD Lite and fastboot, gives me the error: version downgraded for primary_gpt.

ibphantom said:
THANK YOU! I really appreciate it, you have no idea how happy I am.
RSD Lite and fastboot, gives me the error: version downgraded for primary_gpt.
Click to expand...
Click to collapse
It was latest that i gave you..

Salik Iqbal said:
It was latest that i gave you..
Click to expand...
Click to collapse
Uhh... so what could the problem be? lol.

ibphantom said:
THANK YOU! I really appreciate it, you have no idea how happy I am.
RSD Lite and fastboot, gives me the error: version downgraded for primary_gpt.
Click to expand...
Click to collapse
There are other att files on that folder, download and check if they work for you.. Also edit the xml abd remove two lines gpt.bin and motoboot.img start it with boot.img

Salik Iqbal said:
There are other att files on that folder, download and check if they work for you.. Also edit the xml abd remove two lines gpt.bin and motoboot.img start it with boot.img
Click to expand...
Click to collapse
I removed
<step MD5="72167323145a532c1158c13f8543e6d3" filename="gpt.bin" operation="flash" partition="partition"/>
<step MD5="a942904bb71a2ba69c27a440e1f9801e" filename="motoboot.img" operation="flash" partition="motoboot"/>
and it flashed up to the boot.img
I got another 'Version Downgraded' error for boot
Does it matter that my bootloader CPU is MSM8974AC ES1.1 and the release keys are for MSM8974BP_4235210.110.09.11R?

I have same problem please somehow help me too
I can't flash boot.img
(bootloader) version: 0.5
(bootloader) version-bootloader: 6016
(bootloader) product: victara
(bootloader) secure: yes
(bootloader) hwrev: 0x82BF
(bootloader) radio: 0x1
(bootloader) emmc: 16GB Samsung REV=07 PRV=0B TYPE=57
(bootloader) ram: 2048MB Elpida S8 SDRAM DIE=4Gb
(bootloader) cpu: MSM8974AC ES1.1
(bootloader) serialno: TA98901CI9
(bootloader) cid: 0x0001
(bootloader) channelid: 0x84
(bootloader) uid: F9FED40C0B000000000000000000
(bootloader) unlocked: no
(bootloader) iswarrantyvoid: no
(bootloader) mot_sst: 0
(bootloader) max-download-size: 536870912
(bootloader) reason: UTAG "bootmode" configured as fastboot
(bootloader) imei: 359279050697553
(bootloader) meid:
(bootloader) date: 09-16-2014
(bootloader) sku: XT1097
(bootloader) iccid: 89014103286416801740
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Mon Feb 22 11:45:36 UTC 2016"
(bootloader) ro.build.fingerprint:
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-gff6f5d9 ([email protected]
(bootloader) kernel.version[1]: ilclbld32) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Tue Sep 29 04:22:36 CDT 2015
(bootloader) sdi.git: git=MBM-NG-V60.16-0-g582b967
(bootloader) sbl1.git: git=MBM-NG-V60.16-0-gfd10553
(bootloader) rpm.git: git=MBM-NG-V60.16-0-gc54d917
(bootloader) tz.git: git=MBM-NG-V60.16-0-g04e322b
(bootloader) aboot.git: git=MBM-NG-V60.16-0-g496ce05
(bootloader) qe: qe 0/0
(bootloader) ro.carrier: att
all: listed above
finished. total time: 0.092s
Click to expand...
Click to collapse

MrSaba said:
I have same problem please somehow help me too
I can't flash boot.img
Click to expand...
Click to collapse
Does anybody know how to erase the gpt.bin so that I can flash stock?
I flashed from XT1095 gpt.bin and now I get the "Version Downgraded for primary_gpt" error.

ibphantom said:
Does anybody know how to erase the gpt.bin so that I can flash stock?
I flashed from XT1095 gpt.bin and now I get the "Version Downgraded for primary_gpt" error.
Click to expand...
Click to collapse
Is your bootloader locked? It must be unlocked to flash firmware from other models as well as to downgrade.
Sent from my XT1095 using Tapatalk

AGISCI said:
Is your bootloader locked? It must be unlocked to flash firmware from other models as well as to downgrade.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Yeah, it's locked. I was just asking in hope that someone had a work around.
I guess I'll try to ship it back to Motorola(since it's within 14 days) and pretend I never even turned it on and ask for the PURE as a replacement.

ibphantom said:
Yeah, it's locked. I was just asking in hope that someone had a work around.
I guess I'll try to ship it back to Motorola(since it's within 14 days) and pretend I never even turned it on and ask for the PURE as a replacement.
Click to expand...
Click to collapse
Yeah, there is nothing you can do. Never flash anything with a locked bootloader, it's a recipe for disaster.
Sent from my XT1095 using Tapatalk

ibphantom said:
Does anybody know how to erase the gpt.bin so that I can flash stock?
I flashed from XT1095 gpt.bin and now I get the "Version Downgraded for primary_gpt" error.
Click to expand...
Click to collapse
Dont play with gpt.bin mate.. You will brick your phone, just wait a little bit more Marshmallow is comming soon, you will have your device working soon, dont try other variant gpt partitions you will brick your phone..
---------- Post added at 11:02 PM ---------- Previous post was at 10:51 PM ----------
Salik Iqbal said:
Dont play with gpt.bin mate.. You will brick your phone, just wait a little bit more Marshmallow is comming soon, you will have your device working soon, dont try other variant gpt partitions you will brick your phone..
Click to expand...
Click to collapse
Umm i found something stupid in your fastboot getvar :/ can you please try this:
Fastboot reboot-bootloader
Fastboot oem fb_mode_clear
Fastboot reboot

softbrick?

I have the same problem, i have XT1097 AT&T and i flashed other provider XT1097 Rom and i cant power on my device i only show fastboot mode and the error to downgrade bootloader , i do not know how can i return to stock , can anyone tell me what can i do ?

Try to install TWRP on Moto X 2014 XT1097.

Hi,
I already unlock the bootloader. I see
Code:
Device is UNKLOCKED. Status Code: 3
It's not the first phone I have TWRP installed. That phone appear to be lock or something else.
Code:
61.00 (sha-130760b, 2016-08-24 12:39:46)
When I fastboot
Code:
flash recovery twrp.img
I see Okay message on my Windows cmd but I see mismatched partition size (recovery)
I cannot boot in my custom recovery partition.
Can you help me please!!!
Thank you!

metabsd said:
Hi,
I already unlock the bootloader. I see
Code:
Device is UNKLOCKED. Status Code: 3
It's not the first phone I have TWRP installed. That phone appear to be lock or something else.
Code:
61.00 (sha-130760b, 2016-08-24 12:39:46)
When I fastboot
Code:
flash recovery twrp.img
I see Okay message on my Windows cmd but I see mismatched partition size (recovery)
I cannot boot in my custom recovery partition.
Can you help me please!!!
Thank you!
Click to expand...
Click to collapse
So you get the latest fastboot from here:
https://developer.android.com/studio/releases/platform-tools.html
The latest TWRP for Victara here: (I still use twrp-3.0.2-2-victara.img)
https://dl.twrp.me/victara/
https://eu.dl.twrp.me/victara/
You put the phone in bootloader mode and connect it, then type:
fastboot flash recovery twrp.img (whatever the name of the .img file is)
Then use the volume rocker only to launch recovery.
The mismatch error is not a problem, you get it because you're flashing a non-stock recovery, but it still works.

Gus Ghanem said:
So you get the latest fastboot from here:
https://developer.android.com/studio/releases/platform-tools.html
The latest TWRP for Victara here: (I still use twrp-3.0.2-2-victara.img)
https://dl.twrp.me/victara/
https://eu.dl.twrp.me/victara/
You put the phone in bootloader mode and connect it, then type:
fastboot flash recovery twrp.img (whatever the name of the .img file is)
Then use the volume rocker only to launch recovery.
The mismatch error is not a problem, you get it because you're flashing a non-stock recovery, but it still works.
Click to expand...
Click to collapse
Hi,
Thanks to reply to my thread
I already try multiple time to flash the recovery with the latest SDK Tool. I also use the same twrp.img file.
I read about a potential problem after the august 2016 update of Motorola and I have that update already install.
I think I have to flash back to a older version (if it's possible) and retry the same twrp recovery flash.
Do you know something about that possible latest patch lock ...
Thank you!

metabsd said:
Hi,
Thanks to reply to my thread
I already try multiple time to flash the recovery with the latest SDK Tool. I also use the same twrp.img file.
I read about a potential problem after the august 2016 update of Motorola and I have that update already install.
I think I have to flash back to a older version (if it's possible) and retry the same twrp recovery flash.
Do you know something about that possible latest patch lock ...
Thank you!
Click to expand...
Click to collapse
I have an XT1097 RETCA, it was updated to the latest stock firmware MPES24.49-18-7, no issues, I've been flashing TWRP and custom ROMs for a couple of years on it.
Don't try to downgrade your stock firmware, if you try to downgrade the bootloader or partition table, you'll brick the phone. Just reflash the latest stock firmware, and try again, because sometimes partitions get corrupted.
In bootloader mode type this, and copy and save the info for your reference:
fastboot getvar all

Gus Ghanem said:
I have an XT1097 RETCA, it was updated to the latest stock firmware MPES24.49-18-7, no issues, I've been flashing TWRP and custom ROMs for a couple of years on it.
Don't try to downgrade your stock firmware, if you try to downgrade the bootloader or partition table, you'll brick the phone. Just reflash the latest stock firmware, and try again, because sometimes partitions get corrupted.
In bootloader mode type this, and copy and save the info for your reference:
fastboot getvar all
Click to expand...
Click to collapse
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: 6100
(bootloader) product: victara
(bootloader) secure: yes
(bootloader) hwrev: 0x82BF
(bootloader) radio: 0x1
(bootloader) emmc: 16GB Sandisk REV=07 PRV=01 TYPE=57
(bootloader) ram: 2048MB Elpida S8 SDRAM DIE=4Gb
(bootloader) cpu: MSM8974AC ES1.1
(bootloader) serialno: TA9890126J
(bootloader) cid: 0x000E
(bootloader) channelid: 0x82
(bootloader) uid: BLAH
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: BLAH
(bootloader) meid:
(bootloader) date: 09-13-2014
(bootloader) sku: XT1097
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Sep 1 15:42:14 UTC 2016"
(bootloader) ro.build.fingerprint:
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband[0]: MSM8974BP_42352121.25.09.24R VICTARA_T
(bootloader) version-baseband[1]: ELUS_CUST
(bootloader) kernel.version[0]: Linux version 3.4.42-g0dad312 ([email protected]
(bootloader) kernel.version[1]: ilclbld72) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Thu Sep 1 10:53:00 CDT 2016
(bootloader) sdi.git: git=MBM-NG-V61.00-0-g582b967
(bootloader) sbl1.git: git=MBM-NG-V61.00-0-g5147b20
(bootloader) rpm.git: git=MBM-NG-V61.00-0-gc54d917
(bootloader) tz.git: git=MBM-NG-V61.00-0-gacbc999
(bootloader) aboot.git: git=MBM-NG-V61.00-0-g130760b
(bootloader) qe: qe 2/1
(bootloader) ro.carrier: tkpca
all: listed above
finished. total time: 0.066s

After you flash recovery, you use volume down to choose recovery, then volume up to launch it. You have to do it right after flashing it, don't reboot the phone before launching TWRP.

Gus Ghanem said:
After you flash recovery, you use volume down to choose recovery, then volume up to launch it. You have to do it right after flashing it, don't reboot the phone before launching TWRP.
Click to expand...
Click to collapse
Mouahahahah Holy Fu**ing s**it
No I press power button to select ...
loool
I'm a noob.
Thank you!!!

metabsd said:
Mouahahahah Holy Fu**ing s**it
No I press power button to select ...
loool
I'm a noob.
Thank you!!!
Click to expand...
Click to collapse
Excellent! Glad it worked!

My XT1063 goes "failed to validate boot image"

I am stuck in the AP Fastboot Flash Mode (S). Recovery, Factory, BP Tools doesn't function, giving the same line "failed to validate xxx image". I can't flash stock ROMs through fastboot commands, all of those were "Failed". The bootloader lock can't even be unlocked, same reason above. Anybody from XDA can help me with this? I desperately tried almost everything on the forum and nothing has progressed so far. Here is the getvar-all information of my device:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 4887
(bootloader) product: titan
(bootloader) secure: yes
(bootloader) hwrev: 0x8400
(bootloader) radio: 0x1
(bootloader) emmc: 8GB Sandisk REV=06 PRV=07 TYPE=17
(bootloader) ram: 1024MB Elpida S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8226 CS
(bootloader) serialno: ZX1D325JTJ
(bootloader) cid: 0x0009
(bootloader) channelid: 0x8d
(bootloader) uid: AAED95070F000000000000000000
(bootloader) unlocked: no
(bootloader) securestate: locked
(bootloader) iswarrantyvoid: no
(bootloader) mot_sst: 0
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 359297055872880
(bootloader) meid:
(bootloader) date: 01-21-2015
(bootloader) sku: XT1063
(bootloader) battid: (null)
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Nov 1 4:11:27 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/titan_retuglb/titan_umts:
(bootloader) ro.build.fingerprint[1]: 6.0/MPBS24.65-34-4/6:user/release-
(bootloader) ro.build.fingerprint[2]: keys
(bootloader) ro.build.version.full[0]: Blur_Version.24.201.4.titan_retug
(bootloader) ro.build.version.full[1]: lb.retuglb.en.US
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband[0]: MSM8626BP_1032.3116.99.00R RETUSA_GLB_
(bootloader) version-baseband[1]: CUST
(bootloader) kernel.version[0]: Linux version 3.4.42-g495dfd8 ([email protected]
(bootloader) kernel.version[1]: ilclbld36) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Wed Aug 24 07:20:10 CDT 2016
(bootloader) sdi.git: sdi.git
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) aboot.git: git=MBM-NG-V48.87-0-g1b80345
(bootloader) partition-type: raw
(bootloader) partition-size:
(bootloader) qe:
(bootloader) productid:
(bootloader) sutinfo:
(bootloader) ro.carrier: retus
all: listed above
finished. total time: 34.876s
I would really appreciate if somebody can solve this problem for me.

Hi! Sorry if im late, but did you use a 1 click flash tool? I reflashed 5.0.2 on my 1063 but i used a 6.0 flash tool and i got the same error! It got corrected once i used the correct flash tool

Angel064able said:
Hi! Sorry if im late, but did you use a 1 click flash tool? I reflashed 5.0.2 on my 1063 but i used a 6.0 flash tool and i got the same error! It got corrected once i used the correct flash tool
Click to expand...
Click to collapse
I used mfastboot and manually entered the codes. Where can I get that flashtool?

imnewbieplsnokick said:
I used mfastboot and manually entered the codes. Where can I get that flashtool?
Click to expand...
Click to collapse
I used this video:youtu.be/Jav4tIv5sCI
Credit to the creator.

Did you downgraded the ROM of your device? The one which comes out of the box? The chances are this happens when you flash downgraded Stock flash files on upgraded bootloader. Try flashing latest factory image available for your device and firstly re flash partition, boot, recovery and bootloader files. Then go for all other flash files serially. This solution 'might' help. Otherwise there's nothing you can do.

imnewbieplsnokick said:
I used mfastboot and manually entered the codes. Where can I get that flashtool?
Click to expand...
Click to collapse
Did you solved your issue? My device went to the same state while I was trying to relock the bootloader and re-unlocking it fixed it!

Angel064able said:
Did you solved your issue? My device went to the same state while I was trying to relock the bootloader and re-unlocking it fixed it!
Click to expand...
Click to collapse
Sorry, I was quite busy with my mid-semester. I tried it out and it didn't work. I guess it is dead now. However, I am thinking about breaking the phone, turning it into a hard-brick state and then reincarnate it back to life. Is it possible?

XT1926-6 Your device is corrupt

Hi, I have a Motorola g6 xt1926-6, with a leyend “your device is corrupt” I try to upload so many softwares but it show me only error, the device have lock the bootloader
I need help me please

yxmikx said:
Hi, I have a Motorola g6 xt1926-6, with a leyend “your device is corrupt” I try to upload so many softwares but it show me only error, the device have lock the bootloader
I need help me please
Click to expand...
Click to collapse
Unlock the bootloader on the Motorola website, take the steps, and once unlocked when you flash the factory firmware you will be installed
Enviado desde mi moto g(6) mediante Tapatalk

stifmaster81 said:
Unlock the bootloader on the Motorola website, take the steps, and once unlocked when you flash the factory firmware you will be installed
Enviado desde mi moto g(6) mediante Tapatalk
Click to expand...
Click to collapse
I can not enter the system to activate the oem option, that's why I have not unlocked

yxmikx said:
I can not enter the system to activate the oem option, that's why I have not unlocked
Click to expand...
Click to collapse
your Motorola goes into recovery?
Power More volume less?
Enviado desde mi moto g(6) mediante Tapatalk

yxmikx said:
I can not enter the system to activate the oem option, that's why I have not unlocked
Click to expand...
Click to collapse
Hmm, can you remember what firmware you had? Have you tried booting to recovery and tried a cache wipe or factory reset?
If your bootloader is still locked and you did not request an unlock key from Motorola, it might be worth considering visiting a service centre and getting your device looked at. You've still got the warranty, hopefully - might as well use it...

yxmikx said:
I can not enter the system to activate the oem option, that's why I have not unlocked
Click to expand...
Click to collapse
You don't need to enter the system. Hold Volume Down and the power button then follow the steps to flash your stock firmware. You need fastboot.exe on your pc. Plug in a USB cable to the pc and phone then flash the stock firmware. Make sure when you power on the device using power + Vol Down to unlock your bootloader. The option you refer to in system does nothing on its own.
Also tell us how you ended up in this situation. I'm guessing you did something to cause the problem?
Sent from my moto g(6) plus using Tapatalk

Xplorer4x4 said:
You don't need to enter the system. Hold Volume Down and the power button then follow the steps to flash your stock firmware. You need fastboot.exe on your pc. Plug in a USB cable to the pc and phone then flash the stock firmware. Make sure when you power on the device using power + Vol Down to unlock your bootloader. The option you refer to in system does nothing on its own.
Also tell us how you ended up in this situation. I'm guessing you did something to cause the problem?
Sent from my moto g(6) plus using Tapatalk
Click to expand...
Click to collapse
I believe you need the bootloader unlocked in order to flash anything. I have a 1926-7 and I'm stuck in bootloader, since I can't access the operating system to allow Developer Options, I can't unlock bootloader, and my os is corrupt.
What can I do? Thanks

DavCan said:
I believe you need the bootloader unlocked in order to flash anything. I have a 1926-7 and I'm stuck in bootloader, since I can't access the operating system to allow Developer Options, I can't unlock bootloader, and my os is corrupt.
What can I do? Thanks
Click to expand...
Click to collapse
You should be able to flash official Moto firmware whether your bootloader is unlocked or not.
Look here:
https://mirrors.lolinet.com/firmware/moto/evert/official/
Download the correct firmware for your device and flash.

Ragarianok said:
You should be able to flash official Moto firmware whether your bootloader is unlocked or not.
Look here: URL
Download the correct firmware for your device and flash.
Click to expand...
Click to collapse
Thanks for your reply. I've tried many firmwares already, no luck. Here's the thing:
I'm stuck in Fastboot, it says "flashing_locked" , so I'm not allowed to flash. If you try the command "flashing unlock" it sends you to enable USB debugging and OEM unluck but I DO NOT have access to the operating system anymore.
I hope there's something I can do. Very costly paperweight I have now haha :crying:

help!
I keep trying things with no luck, it seems like I fogot my car keys inside, no spare keys, and the car is bulletproof
Code:
fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-uefi-bf761ac-180305
(bootloader) product: evert
(bootloader) board: evert
(bootloader) secure: yes
(bootloader) hwrev: PVT1
(bootloader) radio: LATAM
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB SAMSUNG DH6DMB RV=08 PV=05 FV=0000000000000005
(bootloader) ufs: N/A
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: SDM630 1.0 (6)
(bootloader) serialno: ZY323366HL
(bootloader) cid: 0x0032
(bootloader) channelid: 0x1b
(bootloader) uid: 473E091F
(bootloader) securestate: flashing_locked
(bootloader) verity-state: logging (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: UTAG bootmode configured as fastboot
(bootloader) imei: 351853092729596
(bootloader) meid:
(bootloader) date: 08-22-2018
(bootloader) sku: XT1926-7
(bootloader) carrier_sku: XT1926-7
(bootloader) battid: SB18C20873
(bootloader) battery-voltage: 4150
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/evert_n/evert_n:9/PPWS29.
(bootloader) ro.build.fingerprint[1]: 116-11-2/00cb:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.201.2.evert.retai
(bootloader) ro.build.version.full[1]: l.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-05300-sdm660.0
(bootloader) version-baseband: M660_23.40.01.85R EVERT_LATAMDSDS_CUST
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-gba3f1d6 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Wed Feb 6 01:31:11 CST 2019
(bootloader) git:abl: MBM-3.0-uefi-bf761ac-180305
(bootloader) git:xbl: MBM-3.0-uefi-976f2e6-180305
(bootloader) git:pmic: MBM-3.0-uefi-976f2e6-180305
(bootloader) git:rpm: MBM-3.0-uefi-80b016f-180305
(bootloader) git:tz: MBM-3.0-uefi-2c297a4-dirty-180305
(bootloader) git:hyp: MBM-3.0-uefi-2c297a4-dirty-180305
(bootloader) git:devcfg: MBM-3.0-uefi-2c297a4-dirty-180305
(bootloader) git:cmnlib: MBM-3.0-uefi-2c297a4-dirty-180305
(bootloader) git:cmnlib64: MBM-3.0-uefi-2c297a4-dirty-180305
(bootloader) git:keymaster: MBM-3.0-uefi-2c297a4-dirty-180305
(bootloader) git:prov: MBM-3.0-uefi-2c297a4-dirty-180305
(bootloader) git:storsec: MBM-3.0-uefi-2c297a4-dirty-180305
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: retla
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.297s

No luck
No love? Can't believe there's anything I can do with this. What I was thinking I know, but... still...
I've tried the method downloading the Qualcomm drivers, putting the PC in test mode, etc. but I only get the "<Waiting for device>" and nothing else happens.
Hope you can shed some light here. Thanks

Moto G2 XT1072 can't boot

Hi all,
I had a XT1072 with Android 6 and wanted to go back to 5 due to problems with GPS.
I unlocked the boot loader, flashed stock ROM with Android 6 and all was fine.
I next tried to flash stock ROM with Android 5 and was stuck in fast boot with errors like "invalid system image signature" or similar.
Next I messed around with TWRP, stock again, lock, unlock... a mess.
Now it's stuck in fastboot with status "LOCKED, status code 2" (0 is LOCKED, 3 UNLOCKED, 2 what is it?)
I tried flashing stock ROM both 5 and 6 in different versions:
RETDEALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETESALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.99-24_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.99-24_cid7_subsidy-DEFAULT_CFC.xml
Motorola_Moto_G2_XT1072_MPB24.65-34_CID12_6.0
But all fail with "failed validation";
Unlock fails, but I cannot boot in Android to change mentioned option:
Code:
mfastboot-v2> .\mfastboot oem unlock XSVDURWNGOWYDFMGU5ZT
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.057s
RSD Lite to flash stock ROM doesn't see my device.
Rescue and Smart Assistant cannot proceed due to "missing version-baseband:" (see empty var listed below).
Code:
mfastboot-v2> .\mfastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 4821
(bootloader) product: thea
(bootloader) secure: yes
(bootloader) hwrev: 0x8300
(bootloader) radio: 0x3
(bootloader) emmc: 8GB Toshiba REV=06 PRV=51 TYPE=17
(bootloader) ram: 1024MB Elpida S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8926
(bootloader) serialno: ZX1C2272TX
(bootloader) cid: 0x0007
(bootloader) channelid: 0x40
(bootloader) uid: C96B590915000000000000000000
(bootloader) unlocked: no
(bootloader) securestate: locked
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 2
(bootloader) max-download-size: 536870912
(bootloader) reason: Fall-through from mot-charger boot mode
(bootloader) imei: 353310061467870
(bootloader) meid:
(bootloader) date: 04-28-2015
(bootloader) sku: XT1072
(bootloader) battid: SNN5956A
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Fri Sep 16 3: 2:45 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/thea_reteu/thea:6.0/MPBS2
(bootloader) ro.build.fingerprint[1]: 4.65-34-5/6:user/release-keys
(bootloader) ro.build.version.full[0]: Blur_Version.24.201.5.thea_reteu.
(bootloader) ro.build.version.full[1]: reteuall.en.EU
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-g495dfd8 ([email protected]
(bootloader) kernel.version[1]: ilclbld71) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Sat Sep 10 01:48:29 CDT 2016
(bootloader) sdi.git: git=MBM-NG-V48.21-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V48.21-0-gbffe41a
(bootloader) rpm.git: git=MBM-NG-V48.21-0-gbe53f43
(bootloader) tz.git: git=MBM-NG-V48.21-0-g31cba28
(bootloader) aboot.git: git=MBM-NG-V48.21-0-gd8d8d9e
(bootloader) partition-type: raw
(bootloader) partition-size:
(bootloader) qe: qe 0/0
(bootloader) productid: ZX1C2272TX
(bootloader) sutinfo:
(bootloader) ro.carrier: reteu
all: listed above
finished. total time: 0.105s
Do you have any suggestions to restore it?
Let me know if I can give you more information.
Thanks

enricocava said:
Hi all,
I had a XT1072 with Android 6 and wanted to go back to 5 due to problems with GPS.
I unlocked the boot loader, flashed stock ROM with Android 6 and all was fine.
I next tried to flash stock ROM with Android 5 and was stuck in fast boot with errors like "invalid system image signature" or similar.
Next I messed around with TWRP, stock again, lock, unlock... a mess.
Now it's stuck in fastboot with status "LOCKED, status code 2" (0 is LOCKED, 3 UNLOCKED, 2 what is it?)
Click to expand...
Click to collapse
Sometimes the bootloader will relock, when using a custom recovery is used.
I'm not sure why usually when trying to install a rom.
It's very common, but it happens on many Moto devices.
enricocava said:
I tried flashing stock ROM both 5 and 6 in different versions:
RETDEALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETESALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.99-24_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.99-24_cid7_subsidy-DEFAULT_CFC.xml
Motorola_Moto_G2_XT1072_MPB24.65-34_CID12_6.0
Click to expand...
Click to collapse
That will have made it worse.
enricocava said:
But all fail with "failed validation";
Unlocking fails with "Please allow OEM unlock from developer options", but Android is not booting so I cannot change it.
RSD Lite to flash stock ROM doesn't see my device.
Click to expand...
Click to collapse
RSD Lite doesn't work with Windows 9/10/11
Use XP/7
enricocava said:
Rescue and Smart Assistant cannot proceed due to "missing base version" (string is not correct, I'll chek it later).
Do you have any suggestions to restore it?
Let me know if I can give you more information.
Thanks
Click to expand...
Click to collapse
What does getvar all say?
Code:
fastboot getvar all
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com

Thank you for your quick reply.
sd_shadow said:
RSD Lite doesn't work with Windows 9/10/11
Use XP/7
Click to expand...
Click to collapse
Colud it work on a Win7 on a Virtual machine or does it need direct access to USB ports? At the moment I have not an old Windows available.
sd_shadow said:
What does getvar all say?
Click to expand...
Click to collapse
I updated the original post.
sd_shadow said:
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Click to expand...
Click to collapse
I missed this post, I'll take a look.

enricocava said:
Hi all,
I had a XT1072 with Android 6 and wanted to go back to 5 due to problems with GPS.
I unlocked the boot loader, flashed stock ROM with Android 6 and all was fine.
I next tried to flash stock ROM with Android 5 and was stuck in fast boot with errors like "invalid system image signature" or similar.
Next I messed around with TWRP, stock again, lock, unlock... a mess.
Now it's stuck in fastboot with status "LOCKED, status code 2" (0 is LOCKED, 3 UNLOCKED, 2 what is it?)
I tried flashing stock ROM both 5 and 6 in different versions:
RETDEALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETESALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.99-24_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.99-24_cid7_subsidy-DEFAULT_CFC.xml
Motorola_Moto_G2_XT1072_MPB24.65-34_CID12_6.0
But all fail with "failed validation";
Unlock fails, but I cannot boot in Android to change mentioned option:
Code:
mfastboot-v2> .\mfastboot oem unlock XSVDURWNGOWYDFMGU5ZT
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.057s
RSD Lite to flash stock ROM doesn't see my device.
Rescue and Smart Assistant cannot proceed due to "missing version-baseband:" (see empty var listed below).
Code:
mfastboot-v2> .\mfastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 4821
(bootloader) product: thea
(bootloader) secure: yes
(bootloader) hwrev: 0x8300
(bootloader) radio: 0x3
(bootloader) emmc: 8GB Toshiba REV=06 PRV=51 TYPE=17
(bootloader) ram: 1024MB Elpida S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8926
(bootloader) serialno: ZX1C2272TX
(bootloader) cid: 0x0007
(bootloader) channelid: 0x40
(bootloader) uid: C96B590915000000000000000000
(bootloader) unlocked: no
(bootloader) securestate: locked
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 2
(bootloader) max-download-size: 536870912
(bootloader) reason: Fall-through from mot-charger boot mode
(bootloader) imei: 353310061467870
(bootloader) meid:
(bootloader) date: 04-28-2015
(bootloader) sku: XT1072
(bootloader) battid: SNN5956A
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Fri Sep 16 3: 2:45 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/thea_reteu/thea:6.0/MPBS2
(bootloader) ro.build.fingerprint[1]: 4.65-34-5/6:user/release-keys
(bootloader) ro.build.version.full[0]: Blur_Version.24.201.5.thea_reteu.
(bootloader) ro.build.version.full[1]: reteuall.en.EU
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-g495dfd8 ([email protected]
(bootloader) kernel.version[1]: ilclbld71) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Sat Sep 10 01:48:29 CDT 2016
(bootloader) sdi.git: git=MBM-NG-V48.21-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V48.21-0-gbffe41a
(bootloader) rpm.git: git=MBM-NG-V48.21-0-gbe53f43
(bootloader) tz.git: git=MBM-NG-V48.21-0-g31cba28
(bootloader) aboot.git: git=MBM-NG-V48.21-0-gd8d8d9e
(bootloader) partition-type: raw
(bootloader) partition-size:
(bootloader) qe: qe 0/0
(bootloader) productid: ZX1C2272TX
(bootloader) sutinfo:
(bootloader) ro.carrier: reteu
all: listed above
finished. total time: 0.105s
Do you have any suggestions to restore it?
Let me know if I can give you more information.
Thanks
Click to expand...
Click to collapse
Code:
(bootloader) ro.build.fingerprint[0]: motorola/thea_reteu/thea:6.0/MPBS2
(bootloader) ro.build.fingerprint[1]: 4.65-34-5/6:user/release-keys
This should be the correct firmware
https://mirrors-obs-2.lolinet.com/firmware/motorola/2015/thea/official/RETEU/
XT1072_THEA_RETEU_6.0_MPBS24.65-34-5_cid7_subsidy-DEFAULT_CFC.xml.zip
Try flashing
Code:
fastboot flash partition gpt.bin
fastboot reboot bootloader
Then flash the firmware using the flash_file.xml as reference.

sd_shadow said:
Code:
(bootloader) ro.build.fingerprint[0]: motorola/thea_reteu/thea:6.0/MPBS2
(bootloader) ro.build.fingerprint[1]: 4.65-34-5/6:user/release-keys
This should be the correct firmware
https://mirrors-obs-2.lolinet.com/firmware/motorola/2015/thea/official/RETEU/
XT1072_THEA_RETEU_6.0_MPBS24.65-34-5_cid7_subsidy-DEFAULT_CFC.xml.zip
Try flashing
Code:
fastboot flash partition gpt.bin
fastboot reboot bootloader
Then flash the firmware using the flash_file.xml as reference.
Click to expand...
Click to collapse
Thank you, it worked! So the problem was the wrong fw version and messing up gpt with random commands, right?
For a downgrade I can follow this one, right? https://forum.xda-developers.com/t/guide-flashing-motorola-firmware.4042039/post-84863341

enricocava said:
Thank you, it worked! So the problem was the wrong fw version and messing up gpt with random commands, right?
Click to expand...
Click to collapse
I believe so
enricocava said:
For a downgrade I can follow this one, right? https://forum.xda-developers.com/t/guide-flashing-motorola-firmware.4042039/post-84863341
Click to expand...
Click to collapse
Do not downgrade unless the bootloader says unlocked again.
If the bootloader is reported as unlocked again,
sure you should be able to downgrade the firmware.