Database Develop

need help, mucked up during installing cm11

I have a Sony Xperia Z1 and I have had cyanogenmod12.1 on my device for a little while now, but there are a couple of bugs and I wanted to go back to cyanogenmod11, so I downloaded the cm11 zip file onto my device and copyed it to the sd card,I then downloaded TWRP manager because the cyanogenmod recvoary does not have a zip file or flash part in the recovary, so I followed the procedures and then I flashed TWRP recovary. Once I got into the TWRP recovary I found the zip file for cm11 I then clicked flash. Not long later it said succesfull and then i had to reboot, i clicked reboot and this is where it whet wrong. My device then went into a bootloop because I left my device for 10mins. I then tried to access the custom recovary but it just came up with the sony logo and no custom recovary has come up since.

Jack Neilson said:
I ave a Sony Xperia Z1 and I have had cyanogenmod12.1 on my device for a little while now, but there are a couple of bugs and I wanted to go back to cyanogenmod11, so I downloaded the cm11 zip file onto my device and copyed it to the sd card,I then downloaded TWRP manager because the cyanogenmod recvoary does not have a zip file or flash part in the recovary, so I followed the procedures and then I flashed TWRP recovary. Once I got into the TWRP recovary I found the zip file for cm11 I then clicked flash. Not long later it said succesfull and then i had to reboot, i clicked reboot and this is where it whet wrong. My device then went into a bootloop because I left my device for 10mins. I then tried to access the custom recovary but it just came up with the sony logo and no custom recovary has come up since. Please help
-Jack
Click to expand...
Click to collapse
Hello,
I have reported this thread to be moved to the right Q&A so that experts there maybe able to help.
-Vatsal

If you made a backup, flash dual recovery then restore the backup?
Otherwise flash stock and start again

The only solution is to flash your firmware and start from zero point
Since you said there is bootloop and no recovery
Or you can flash twrp img file through fastboot mode
But for safety flash is best

You do not need to do a fresh flash. Doing so without deselected some things might wipe data like photos.
1. If you don't already have the fastboot and ADB drivers, get them here
2. Download a kernel with recovery and extract the boot.img
3. Open up command prompt in the folder the boot.img is in
4. Make sure your device is turned off completely
5. Hold volume down while attaching it to your computer
6a. If you just want to have temporary acces to recovery type in this code:
Code:
fastboot boot boot.img
6b. If you want to keep acces and use the recovery after rebooting type in this code:
Code:
fastboot flash boot boot.img
7. Enter recovery the way you would normally do, backup your important files and/or flash the new rom and kernel you would like to use

(ROOT) (RECOVERY) Samsung galaxy J1 ACE - SM-J111f

Recovery For Sm-j111f
TWRP Custom Recovery
Download Twrp:
https://drive.google.com/file/d/0B-XcW9YJpyynS1ZvOFFZblB4aFU/view?usp=drivesdk
INSTRUCTUIONS:
1. Download and install Odin on your PC.
2. Once you have Odin installed, download the proper .tar file for your device from the download link above.
3.You Need To Install Samsung USB Driver .
4. Power off your device. Turn on your device using the proper key combo to get into download mode and attach the device to your computer via a USB cable
5. Use the PDA tab or button to browse to and select the tar file that you downloaded and flash the device.
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is ooted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
There is a bug After installing the custom recovery It cant mound Phons Extarnal SD Card
.
So you have to Reset your device using TWRP. Then It working Properly
Now Enjoy

any costume rom for sm j111f ?

Thanks. I will try it out after my warranty expires

Any mirror for the recovery?

Will root brick my phone?

help: twrp auto boot

yesterday i wanted to get factory setting but when i did it my phone got me to twrp recovery and i couldn't open the os please help
please.

ahmedhamdy405 said:
yesterday i wanted to get factory setting but when i did it my phone got me to twrp recovery and i couldn't open the os please help
please.
Click to expand...
Click to collapse
I have the problem :/

ahmedhamdy405 said:
yesterday i wanted to get factory setting but when i did it my phone got me to twrp recovery and i couldn't open the os please help
please.
Click to expand...
Click to collapse
1 . wipe everything with TWRP DALVIK/CHACHE/SYSTEM/DATA
2 . INSTALL ROM THAT YOU WANT TO INSTALL WITH TWRP
3 . WIPE CACHE/DALVIK
3 . INSTALL STOCK RECOVERY WITH SP FLASH TOOL
4 . REBOOT WITH STOCK RECOVERY
5 . WIPE USER DATA
6 . REBOOT
ENJOY
Flashing stock recovery via SP Flash Tool.
1.) Download the both spflashtool and recovery package.
2.) Extract both in the pc.
3.) Run SpFlash Tool.
4.) Load the scatter file.
5.) In the menu “Option” tab, go to “Download”, and put a “tick” in the “DA DL All with Checksum.
6.) Flash it in "download only" mode
Download Recovery:click here
Download SpFlash Tool:Click here

Your system parition not ok
Hello guy!
From the second picture, I think your system partition ( /system ) have problem.
I recommend you wipe all data, system, cache, dalvik-cache. Then use stock system.img, flash it by SP tool (just choose "Download" option). If you aren't familiar to SP tool, read these thread :
https://forum.xda-developers.com/le...ovo-a7000-as223160405-row-andoid-6-0-t3360467
https://forum.xda-developers.com/lenovo-a7000/development/flashing-stock-rom-via-sp-flash-t3364235
Have a good day.
Sincerely!

K3 Note bootlooping to TWRP only

I had Resurrection rom installed in my K3 note and needed to sell the phone. So performed a complete wipe of the internal storage and tried to install AICP rom later (TWRP), it shows flashed successfully, but whenever I am booting my phone, it always boots to recovery only. Downloaded the SP flash tool to go back to stock rom with stock firmware, but as soon as I plug my phone woth my laptop with the USB cable, (which is switched off at this moment) after clicking the download option in the SP Flash tool, it just again boots back to recovery and the stock firmware's download never happens because my phone has booted into recovery. So i guess no use of SP Flash tool too.
I am able to connect my phone to my laptop and can see my internal storage and i can transfer files too.
Any help,?
Current rom flashed via TWRP - AICP v4.2 and Gapps micro (arm 64, pico) (Still stuck in booloop to TWRP only )

I am having the same issue! I've selected to restore factory settings and bam, it boots only to TWRP, I've tried to flash it with new rr rom (09.2017) but it is without any improvement still TWRP.
I think I'll try to do things like I did when changing it from stock model.

My phone TWRP-looped many times. The solution is actually easy.
1. Reflash using SPFlashtool ONLY the stock recovery
2. boot into stock recovery
3. choose english > press reboot phone
4. phone will reboot into rom without problemos
5. reflash TWRP
cheers
or
1. Copy stock recovery.img into sdcard
2. In twrp, select Install and navigate to where you put stock recovery.img
3. Press install image. Then, Select recovery.img. Slide to install
4. boot into stock recovery
5. choose english > press reboot phone
6. phone will reboot into rom without problemos
7. reflash TWRP
DONE

what button combination to boot into fastboot
Hi
Whats the key communication to boot into fastboot to flash recovery image ?
Currently, having only stock recovery with no os installation.

Did you get the solution?

I gave reboot phone and the phone is stuck into an infinite restart.
Arjunism said:
My phone TWRP-looped many times. The solution is actually easy.
1. Reflash using SPFlashtool ONLY the stock recovery
2. boot into stock recovery
3. choose english > press reboot phone
4. phone will reboot into rom without problemos
5. reflash TWRP
cheers
or
1. Copy stock recovery.img into sdcard
2. In twrp, select Install and navigate to where you put stock recovery.img
3. Press install image. Then, Select recovery.img. Slide to install
4. boot into stock recovery
5. choose english > press reboot phone
6. phone will reboot into rom without problemos
7. reflash TWRP
DONE
Click to expand...
Click to collapse

[GUIDE] Realme X2 Brick After Flash ROM or TWRP (Realme UI 2.0)

There are only one reason for your device to brick is Wrong File Flash. The Most important think is you remember what you flash last time ,Your Device ROM or Recovery.
these are type of your Deice is brick
1. You are on Stock ROM realme UI 1.0 and Flash TWRP go to click here
2. You are on Stock ROM realme UI 1.0 and TWRP and Flash Custom ROM go to Click here
3. You are On Custom ROM and GO back To stock ROM Realme UI 1.0 , click here this theread is most useful read all think.
4. You are on Realme UI 2.0, and Flash TWRP than Brick....
no post available for root or twrp in ui 2.0 so many users flash last twrp for rooting phone than device are brick or phone boot in fastboot mode only.
Download the stock recovery for Realme UI 2.0 CLICK HERE like recovery_x2_a11.img.
Start (reboot) phone into fastboot mode
Give Command from Your computer(any device to use for fastboot) fastboot flash recovery recovery_x2_a11.img.
Next fastboot reboot recovery now your device boot in recovery UI 2.0.
from the stock recovery u wipe your all data (its required for your device boot in stock rom) than reboot your device may be taken time around 5-6 min on realme logo .
if your device don't boot after 10 min. dont very we have solution force restart Volume+ or Power key (press both) more than 10 sec. and go to Stock recovery.
Download the roll back package and put on SD card or OTG .
Link: Rollback package realme_X2_RMX1992EX / realme_X2_RMX1992AEX
Enter recovery mode to roll back:
Turn off your phone-->Long press the volume down and power buttons at the same time enter recovery mode-->Choose the language -->Install from storage
If you want to custom recovery or ROM Like as TWRP so you downgrade your ROM ui 2.0 to realme ui 1.0 follow Step 6 than 1 or 2
if any other query comment please or sorry for bad English

You are on Realme UI 2.0, and Flash TWRP than Brick....
no post available for root or twrp in ui 2.0 so many users flash last twrp for rooting phone than device are brick or phone boot in fastboot mode only.
Any update on this?
I have started flashing twrp and stuck at fastboot mode only.
Couldn't enter recovery mode

hercules1997 said:
You are on Realme UI 2.0, and Flash TWRP than Brick....
no post available for root or twrp in ui 2.0 so many users flash last twrp for rooting phone than device are brick or phone boot in fastboot mode only.
Any update on this?
I have started flashing twrp and stuck at fastboot mode only.
Couldn't enter recovery mode
Click to expand...
Click to collapse
Follow step 4 if you stuck on fastboot mode only

I have realme X2 (RMX1992 Indian version) currently stuck with no ROM. Only with bootloader screen
How did i end up here:
I have applied all the updates available for Realme X2, then it was in relame UI 2.0.
I have tried to flash ofp of realme 1.0 from official flash tool "realme_Flash_Tool_V2".
Flashing completed without error, But phone rebooted to bootloader
Since then, whatever i have flashed, it done not move further from bootloader
None of the other customer recoveries woking ( Tried TWRP, Orange fox)
I have followed the steps in previous post of this thread and i was able to flash "recovery_x2_a11.img".
But in the recovery, From phone storage shows nothing. I have put realme_X2_RMX1992EX package in SD card and tried to check the same from recovery. But from SD card it shows nothing even though i have put files there. Even From USB OTG, same behaviour
Could someone help how can i get it to some ROM to make the phone alive!! May be with fastboot flashable images for RUI2.0.

Arjun89 said:
I have realme X2 (RMX1992 Indian version) currently stuck with no ROM. Only with bootloader screen
How did i end up here:
I have applied all the updates available for Realme X2, then it was in relame UI 2.0.
I have tried to flash ofp of realme 1.0 from official flash tool "realme_Flash_Tool_V2".
Flashing completed without error, But phone rebooted to bootloader
Since then, whatever i have flashed, it done not move further from bootloader
None of the other customer recoveries woking ( Tried TWRP, Orange fox)
I have followed the steps in previous post of this thread and i was able to flash "recovery_x2_a11.img".
But in the recovery, From phone storage shows nothing. I have put realme_X2_RMX1992EX package in SD card and tried to check the same from recovery. But from SD card it shows nothing even though i have put files there. Even From USB OTG, same behaviour
Could someone help how can i get it to some ROM to make the phone alive!! May be with fastboot flashable images for RUI2.0.
Click to expand...
Click to collapse
hey bro, same as you, Have you solved it?

sauravprofile said:
There are only one reason for your device to brick is Wrong File Flash. The Most important think is you remember what you flash last time ,Your Device ROM or Recovery.
these are type of your Deice is brick
1. You are on Stock ROM realme UI 1.0 and Flash TWRP go to click here
2. You are on Stock ROM realme UI 1.0 and TWRP and Flash Custom ROM go to Click here
3. You are On Custom ROM and GO back To stock ROM Realme UI 1.0 , click here this theread is most useful read all think.
4. You are on Realme UI 2.0, and Flash TWRP than Brick....
no post available for root or twrp in ui 2.0 so many users flash last twrp for rooting phone than device are brick or phone boot in fastboot mode only.
Download the stock recovery for Realme UI 2.0 CLICK HERE like recovery_x2_a11.img.
Start (reboot) phone into fastboot mode
Give Command from Your computer(any device to use for fastboot) fastboot flash recovery recovery_x2_a11.img.
Next fastboot reboot recovery now your device boot in recovery UI 2.0.
from the stock recovery u wipe your all data (its required for your device boot in stock rom) than reboot your device may be taken time around 5-6 min on realme logo .
if your device don't boot after 10 min. dont very we have solution force restart Volume+ or Power key (press both) more than 10 sec. and go to Stock recovery.
Download the roll back package and put on SD card or OTG .
Link: Rollback package realme_X2_RMX1992EX / realme_X2_RMX1992AEX
Enter recovery mode to roll back:
Turn off your phone-->Long press the volume down and power buttons at the same time enter recovery mode-->Choose the language -->Install from storage
If you want to custom recovery or ROM Like as TWRP so you downgrade your ROM ui 2.0 to realme ui 1.0 follow Step 6 than 1 or 2
if any other query comment please or sorry for bad English
Click to expand...
Click to collapse
hi, in the step6, there is nothing in SD card or OTG, and when i click from phone storage, it happens nothing, Could someone help how can i get it to some ROM to make the phone alive!! May be with fastboot flashable images for RUI2.0.

bidoru said:
hi, in the step6, there is nothing in SD card or OTG, and when i click from phone storage, it happens nothing, Could someone help how can i get it to some ROM to make the phone alive!! May be with fastboot flashable images for RUI2.0.
Click to expand...
Click to collapse
6 step have a download link download file transfer in sd card

sauravprofile said:
6 step have a download link download file transfer in sd card
Click to expand...
Click to collapse
sd card can not be detected, so I put files in sd card and insert sd card in otg,but found nothing from recovery