I tried flashing the 6.0 marshmallow rom onto my note 5 n920p
but i pugged in the device set up odin everything was fine but when i click start it shows nand write start
then it shows failed and on my phone it says custom binary (boot) blocked by binary
please help
Try this one Developer Option > Enable OEM Unlock
Related
Hey guys I have a Note 5 N9200 and I get this error: "SW REV CHECK FAIL DEVICE 2 BINARY 1" in Download Mode after I tried to flash a new firmware from Sammobile.
I rooted my phone, it worked then I tried to replace the mixer files and I ended up with softbrick and the Download mode error above^ . I can still use TWRP but nothing else..Ty for help
Na7anael said:
Hey guys I have a Note 5 N9200 and I get this error: "SW REV CHECK FAIL DEVICE 2 BINARY 1" in Download Mode after I tried to flash a new firmware from Sammobile.
I rooted my phone, it worked then I tried to replace the mixer files and I ended up with softbrick and the Download mode error above^ . I can still use TWRP but nothing else..Ty for help
Click to expand...
Click to collapse
Install Smart Switch (Kies for newer models) on a computer, and use the option Emergency software recovery and initialization.
[/COLOR]
Uzair40 said:
Install Smart Switch (Kies for newer models) on a computer, and use the option Emergency software recovery and initialization.
Click to expand...
Click to collapse
hey, can you help me please, I have searched enough but unable to find any solution.
I tried Odin to flash Indian firmware on my Australian Optus phone (Note 5) and got failed message in Odin. I tried SmartSwitch as well but unable to find S/N number for my phone. Now My phone is stuck on Odin mode. Please help.
Hi all I,ve got problem
I've got stock rom by my carrier PLS (Poland), I've got root to and TWRP,
now...
I want update my lolipop 5.1.1 to marshmallow 6.0.1 from post: http://forum.xda-developers.com/sam...-cyanogenmod-13-0-unofficial-samsung-t3326297
When I copy files to my SD, I reboot to TWRP but can't, was watching red colour custom binary blocked by frp lock and made a brick for a while,
I go to download mode/odin/stock rom as ap and go...everything goes good.
And now is still a cell not brick, but don't have TWRP now, when I want to add it can't becouse in Downloading mode is:
"ODIN MODE
PRODUCT NAME: SM-A310F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: On
Secure Download: Enabled
KNOX VARRANTY VOID: 1 (0X0304)
RP SWREV: B:2 K:0 S:0
Custom Binary (RECOVERY) Blocked byFRP Lock
How to remove this all FRP? and instal TWRP??
That post you mention is about SM300, not SM 310F, so it won't work for A3 2016 version...
For your issue with TWRP, you need to do "OEM unlock" in ODIN. Just follow this guide: http://forum.xda-developers.com/sam...ent/recovery-samsung-sm-a310f-fd-y-m-t3317339
Just go in Settings -> Developer Options and find "OEM Unlocking"
Enable OEM unlock and you're done
marki555 said:
That post you mention is about SM300, not SM 310F, so it won't work for A3 2016 version...
For your issue with TWRP, you need to do "OEM unlock" in ODIN. Just follow this guide: http://forum.xda-developers.com/sam...ent/recovery-samsung-sm-a310f-fd-y-m-t3317339
Click to expand...
Click to collapse
you're right about the version of the rom , but that does not change the fact that I can not install custom recovery.
Via Odin I can't "OEM unlock", I did this in Settings -> Developer Options and find "OEM Unlocking"
Enable OEM unlock as say ChemicalBRH
So thank you both
but now I've got another problem:
my carieer is PLS (Poland)
And find stock rom android 6.0.1 with CSC XNZ
PDA: A310FXXU2BPGB
CSC: A310FXNZ2BPF2
CHANGELIST: 8352888
BUILD DATE: 26.07.2016
I just update rom to this 6.0.1
and now I Settings -> Developer Options and find "OEM Unlocking"
ok, TWRP is on board, but I can't root my device
Kingroot is blocked in system, via twrp is showing that it was install, in apps is super su, but when I open it
it says su is not install
Pleas help me one more time
_euphonic_ said:
you're right about the version of the rom , but that does not change the fact that I can not install custom recovery.
Via Odin I can't "OEM unlock", I did this in Settings -> Developer Options and find "OEM Unlocking"
Enable OEM unlock as say ChemicalBRH
So thank you both
but now I've got another problem:
my carieer is PLS (Poland)
And find stock rom android 6.0.1 with CSC XNZ
PDA: A310FXXU2BPGB
CSC: A310FXNZ2BPF2
CHANGELIST: 8352888
BUILD DATE: 26.07.2016
I just update rom to this 6.0.1
and now I Settings -> Developer Options and find "OEM Unlocking"
ok, TWRP is on board, but I can't root my device
Kingroot is blocked in system, via twrp is showing that it was install, in apps is super su, but when I open it
it says su is not install
Pleas help me one more time
Click to expand...
Click to collapse
I suggest you to wait till the AutoRoot CF by Chainfire will be on the way.
you can check this at autoroot.chainfire.eu and search with CTRL + F "310F"
Ok it's done.
I just add newest supersu via TWRP, so it's a fine
Tapped by SM A310F
_euphonic_ said:
Ok it's done.
I just add newest supersu via TWRP, so it's a fine
Tapped by SM A310F
Click to expand...
Click to collapse
There are no way except flashing the ROM, and root it again but when rooted the phone, never disable developer options and OEM unlock option.
frp locked
hiya guys i need some help ive rooted my galaxy a3 2016 and had different roms on it recently flashed NougatStockA32017V1.0ForA32016 so what happened i couldnt set my keypad lock and everytime i went to settings to change to pattern or pin my settings would force close so i factory reset put RevolutionOSv5.0.1FinalVersionA310xxExynos-ByZonik(1) onto my sd card to flash with twrp but i fully wiped everything even my system in twrp ready to flash my new rom anyway my recovery went and i could only go to download mode so tried flashing twrp and the rom through odin like i have many times but now i get the frp locked my phone literally has no operating system and no recovery and odin always fails when i try using it to install stock rom, root or flash twrp ive had phones bricked before and managed to fix them but this time ive tried a lot but nothing happens is there anything i can do to get my phone back up and running any help would be appreciated, thanks.
odin mode
product name; sm-a310f
current binary; samsung official
system status; custom
frp lock; on
secure download; enabled
knox warrenty void; 1 (0x0500)
rp swerv; b;3 k;0 s;0
To remove the lock, you will need the engineering binaries from Samsung.
I unfortunately I cant give you the files, they will sue me.
Matt Hinchy said:
hiya guys i need some help ive rooted my galaxy a3 2016 and had different roms on it recently flashed NougatStockA32017V1.0ForA32016 so what happened i couldnt set my keypad lock and everytime i went to settings to change to pattern or pin my settings would force close so i factory reset put RevolutionOSv5.0.1FinalVersionA310xxExynos-ByZonik(1) onto my sd card to flash with twrp but i fully wiped everything even my system in twrp ready to flash my new rom anyway my recovery went and i could only go to download mode so tried flashing twrp and the rom through odin like i have many times but now i get the frp locked my phone literally has no operating system and no recovery and odin always fails when i try using it to install stock rom, root or flash twrp ive had phones bricked before and managed to fix them but this time ive tried a lot but nothing happens is there anything i can do to get my phone back up and running any help would be appreciated, thanks.
odin mode
product name; sm-a310f
current binary; samsung official
system status; custom
frp lock; on
secure download; enabled
knox warrenty void; 1 (0x0500)
rp swerv; b;3 k;0 s;0
Click to expand...
Click to collapse
PLEASE HELP Note8 hang the logo
The problem is as follows:
When I make a software update for the SM-950f / DS, the phone hangs on the samsung logo
I searched and flashed again with Odin but the result was an error
At startup the error message: kernel rev check fail device 2 binary 1
I flash twrp-3.1.1-0-greatlte_V3 the error: flash fail
Flashing TWRP-3.2.3-TwrpBuilder-greatlte-2018-08-21_17-30 similar results
Now I do not know how to start
I think you use the wrong Odin Version. You need Odin v3.13.1.
You used twrp already before your Software Update? Or why you want to flash TWRP?
Normally it's enough to flash a 4 part stock firmware to get your device working again. Use the "home CSC" file to don't lose your own files.
Edit:
on your first try it looks like you tried to flash an older firmware version. You can't downgrade the bootloader. Flash the same or a newer firmware.
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts
m4gicvn said:
PLEASE HELP Note8 hang the logo
The problem is as follows:
When I make a software update for the SM-950f / DS, the phone hangs on the samsung logo
I searched and flashed again with Odin but the result was an error
At startup the error message: kernel rev check fail device 2 binary 1
I flash twrp-3.1.1-0-greatlte_V3 the error: flash fail
Flashing TWRP-3.2.3-TwrpBuilder-greatlte-2018-08-21_17-30 similar results
Now I do not know how to start
Click to expand...
Click to collapse
For the TWRP error, are you wiping data (where you have to type yes) first? If you do not do that TWRP won't work. There is also newer versions of TWRP available.
Logel said:
I think you use the wrong Odin Version. You need Odin v3.13.1.
You used twrp already before your Software Update? Or why you want to flash TWRP?
Normally it's enough to flash a 4 part stock firmware to get your device working again. Use the "home CSC" file to don't lose your own files.
Edit:
on your first try it looks like you tried to flash an older firmware version. You can't downgrade the bootloader. Flash the same or a newer firmware.
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts
Click to expand...
Click to collapse
Previously my phone was not rooted or installed TWRP, everything original.
The phone announces a new software update, I make updates and the result is a phone hang on the samsung logo
I downloaded a stock rom, I made Flash with Odin 3.13.1 but the result was a bug, now I do not have a Bootloader. I found out that I was flashing an old version.
So I need Flash recovery, I was trying to find a new version but as a result I could not successfully flash.
I have been trying to find a newer Fimware (such as Android 8) but now I'm still not successful
Logel said:
Edit:
on your first try it looks like you tried to flash an older firmware version. You can't downgrade the bootloader. Flash the same or a newer firmware.
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts
Click to expand...
Click to collapse
m4gicvn said:
Previously my phone was not rooted or installed TWRP, everything original.
The phone announces a new software update, I make updates and the result is a phone hang on the samsung logo
I downloaded a stock rom, I made Flash with Odin 3.13.1 but the result was a bug, now I do not have a Bootloader. I found out that I was flashing an old version.
So I need Flash recovery, I was trying to find a new version but as a result I could not successfully flash.
I have been trying to find a newer Fimware (such as Android 8) but now I'm still not successful
Click to expand...
Click to collapse
What do you mean you cannot flash and you don't have a bootloader?
"kernel rev check fail device 2 binary 1" means your device is binary 2 and you're trying to flash binary 1 onto your device.
e.g the latest version firmware for note 8 is N950FXXU4CRGA - U4 shows this firmware is binary 4. On the bootloader - SWREV B:1 - this should show if your device is binary 1.
You will need to first oem unlock the device to flash TWRP/custom img. Warning- flashing TWRP will result in KNOX 1.
Note - bootloader should still be there (you might just have drained all your battery) unless the flash failed during flashing bootloader (bootloader is download mode).
Download firmware here (same firmware for n950fd and n950f) - use samfirm program for faster download (only latest ver).
bluecub1st said:
What do you mean you cannot flash and you don't have a bootloader?
"kernel rev check fail device 2 binary 1" means your device is binary 2 and you're trying to flash binary 1 onto your device.
e.g the latest version firmware for note 8 is N950FXXU4CRGA - U4 shows this firmware is binary 4. On the bootloader - SWREV B:1 - this should show if your device is binary 1.
You will need to first oem unlock the device to flash TWRP/custom img. Warning- flashing TWRP will result in KNOX 1.
Note - bootloader should still be there (you might just have drained all your battery) unless the flash failed during flashing bootloader (bootloader is download mode).
Download firmware .
Click to expand...
Click to collapse
Very thank you
I downloaded the android version 8, I successfully flashed. But this time it was like the beginning. the phone is moving, into the upgrade and error, android child back
Then the phone automatically enters recovery mode
I implemented the wipe cache and wipe data but could not change the result
bluecub1st said:
What do you mean you cannot flash and you don't have a bootloader?
"kernel rev check fail device 2 binary 1" means your device is binary 2 and you're trying to flash binary 1 onto your device.
e.g the latest version firmware for note 8 is N950FXXU4CRGA - U4 shows this firmware is binary 4. On the bootloader - SWREV B:1 - this should show if your device is binary 1.
You will need to first oem unlock the device to flash TWRP/custom img. Warning- flashing TWRP will result in KNOX 1.
Note - bootloader should still be there (you might just have drained all your battery) unless the flash failed during flashing bootloader (bootloader is download mode).
Download firmware
Click to expand...
Click to collapse
How to oem unlock the device?
To oem unlock (like all the new samsung devices) you must enable it in the developer options in settings.
As your phone would not boot oem unlock is not available. you must first ensure the phone can boot to stock firmware
I bought a new one from person,who is using M20 for 1 month.
I checked : ROM & recover is stock
when I tried to choose Downloan update manual function . it always display " failed to update software " ( normal it should say your device is latest )
when I access into bootloader it also dispaly :
#reboot recover cause is BL:recovery mode set by key]#
support SINGE-SKU
Block-Based OTA
Supported API : 3
Manual mode V1.0.00
anybody know about this issued?
have any solution?
I also tried flash stock firmware (checked run AP/PCA in Odin only) but it still same issued
crownvn said:
I bought a new one from person,who is using M20 for 1 month.
I checked : ROM & recover is stock
when I tried to choose Downloan update manual function . it always display " failed to update software " ( normal it should say your device is latest )
when I access into bootloader it also dispaly :
#reboot recover cause is BL:recovery mode set by key]#
support SINGE-SKU
Block-Based OTA
Supported API : 3
Manual mode V1.0.00
anybody know about this issued?
have any solution?
I also tried flash stock firmware (checked run AP/PCA in Odin only) but it still same issued
Click to expand...
Click to collapse
I do have a same problem......
Anyone here..any solutions..
Factory reset or flash firmware with odin
Can't download mode....heres my scenario,i flashed a rom in odin but forgot to tick unlock oem in dev option....now my phone is dead (
Did you follow the flashing guide? Added all files to their respective fields in Odin?
M20
Always on display link for m20
Hello,
I've been tried to downgrade from android 12 to android 11 (because it is a requirement to install LineageOS, if I believe their website).
I've downloaded stock firmware for my device and region (SWC) on sammobile and samfw (I was pleased to see that both provides exactly the sames files, checked with md5) for various firmware versions (G973FXXSEFUL1, G973FXXSEGVA9, G973FXXUEGVA4) but I'm not able to flash successfully any of them with heimdall (also tried with Odin on a friend's Windows computer but that didn't help).
When I flash the SYSTEM partition, I see a line that says `CUSTOM Binary(SYSTEM) Blocked By OEM Lock` and after rebooting my device is in "brick"-mode but that doesn't prevent Heimdall from flashing anything I want and whatever I flash then (except SYSTEM) brings it back to normal download mode again.
Right now the lines in small monospace font at the top of the screen say:
```
ODIN MODE (AVB Fail)
system: Error validating footer (6)
CUSTOM system
VBMETA G973FXXSEFUL1, 46766431R
```
One thing I've figured out so far is that enabling "OEM unlock" in the developer settings wasn't enough to actually deactivate it, but since I can't boot into anything other that download mode I can't do much about it now I guess...
Any idea what I should do ? What I should flash in what order ?
Many thanks in advance !