Related
Hi guys!
I built two recoveries to install Lollipop ROMs onto the Incredible S. Of course it can be used for older ROMs also.
TWRP 2.8.7.0
Download
CWM-Touch Recovery
Download
I don't want to make a long post, so happy flashing!
How to install:
Reboot to bootloader
Download which recovery you want to install
Code:
fastboot flash recovery the recoveryyouchose.img
You're done!
I was looking for this! Thanks captain!
here is the pg32img.zip
https://drive.google.com/file/d/0Bzc9pSzALhGCMDI1OUlQOFB0Q0E/edit?usp=docslist_api
https://drive.google.com/file/d/0Bzc9pSzALhGCUEVvcm5JUmJDbkk/edit?usp=docslist_api
Sent from my MI 2SC using XDA Free mobile app
how to run cwm_recovery_vivo.img
szezso said:
Hi guys!
I built two recoveries to install Lollipop ROMs onto the Incredible S. Of course it can be used for older ROMs also.
TWRP 2.8.7.0
Download
CWM-Touch Recovery
Download
I don't want to make a long post, so happy flashing!
How to install:
Reboot to bootloader
Download which recovery you want to install
Code:
fastboot flash recovery the recoveryyouchose.img
You're done!
Click to expand...
Click to collapse
Respected sir
i unfortunately used cwm recovery from playstore and launch it with root access via kingo root
now i gotta stuck in recovery mod, it made a loop
and VivoPop_#06.25.zip file is not going to install
kindly tell me how to skip this recovery and use the particular one
i shall be very thankful to you for this ...
best regards
Zubair
can anyone say how can i install it?
thanks
2820 said:
can anyone say how can i install it?
thanks
Click to expand...
Click to collapse
You need to use fastboot.
Make sure you have fastboot installed on your computer.
Open the terminal in your computer.
Turn your phone off.
Then turn it on by pressing Volume Down + Power.
Wait for a bit then select "fastboot" using the power button.
Then connect your phone to your computer.
Then in the terminal in the computer, type:
Code:
fastboot flash recovery recovery.img
**Replace "recovery.img" with the file you want to install.
then go back to the main bootloader screen and select recovery using the power button.
Thank you.i finaly make it
Sent from my GT-P7500 using XDA Free mobile app
pleas help
I do all step but cmd says
'fastboot flash recovery 'TWRP_2.8.7.0_vivo.img' is not recognize as an internal or external cammand operable program or batch file.
Hi, @szezso could you tell me what version this cwm? Because i just flashed it and I am sure it isn't cwm.. It says cyanogen recovery and there is like 5-6 options like wipe cashe and install update.. But there is no advanced wiping like wipe system..
"The reason I flashed cwm instead of twrp is that my backlight is f*cked up and anything more than 50% brightness will turn it off.. Twrp 2.6.0 didn't and this cwm didn't also.. The backlight works fine.. But this twrp did "
It this support vivo V3Max ?
or any versions ?
getting error
C:\Users\Deepak>fastboot flash recovery TWRP_2.8.7.0_vivo.img
error: cannot load 'TWRP_2.8.7.0_vivo.img'
now fastboot how can recognize file by itself
can you please tell me
Show "fastboot devices".
Show "dir ."
[Guide] How To Setup And Use Fastboot.
Problem with twrp in vivo y21L
Sir,
I have installed twrp recovery successfully in my phone vivo Y21L but when I boot my phone in recovery mode it always load the default recovery given by the company. Custom recovery is not booting up what to do please help me
Naman12811 said:
Sir,
I have installed twrp recovery successfully in my phone vivo Y21L but when I boot my phone in recovery mode it always load the default recovery given by the company. Custom recovery is not booting up what to do please help me
Click to expand...
Click to collapse
Buddy, here's the thread about HTC Incredible S.
For homework, read the rules of the XDA forum.
szezso said:
Hi guys!
I built two recoveries to install Lollipop ROMs onto the Incredible S. Of course it can be used for older ROMs also.
TWRP 2.8.7.0
Download
CWM-Touch Recovery
Download
I don't want to make a long post, so happy flashing!
How to install:
Reboot to bootloader
Download which recovery you want to install
Code:
fastboot flash recovery the recoveryyouchose.img
You're done!
Click to expand...
Click to collapse
which model no. Will it show I am using vivo y21L and installed a twrp recovery 3.2.1 it shows vivo y51 and phone is not updating because of this please help
Help please......
vivo y71
do u have custom recovery for vivo y71 its running 8.1 pplsss. help me thanks
I need custom recovery for VIVO 1820 PLZ someone
szezso said:
Hi guys!
I built two recoveries to install Lollipop ROMs onto the Incredible S. Of course it can be used for older ROMs also.
TWRP 2.8.7.0
Download
CWM-Touch Recovery
Download
I don't want to make a long post, so happy flashing!
How to install:
Reboot to bootloader
Download which recovery you want to install
Code:
fastboot flash recovery the recoveryyouchose.img
You're done!
Click to expand...
Click to collapse
Can i flash the official twrp for vivo y51l on y21l, and will magisk work??
szezso said:
Привет, ребята!
Я сделал два восстановления для установки Lollipop ROM на Incredible S. Конечно, его можно использовать и для старых ROM.
TWRP 2.8.7.0
Скачать
CWM-Touch Recovery
Скачать
Не хочу делать длинных постов, радую прошивку!
Как установить:
Перезагрузитесь в загрузчик
Скачайте, какое рекавери хотите установить
Code:
fastboot flash recovery the recoveryyouchose.img [/ CODE]
[*]Готово! :)
[/LIST]
[/QUOTE]
Click to expand...
Click to collapse
Пустой. Нет файла
hi every one greetings i unlocked my boot loader after that i accidently disabled allow oem unlock after that i flashed stock recovery and now my phone is in a boot loop if i try fast boot to flash recover or factory reset it says
failed remote command not allowed
if any one can help really appreciated
Erecovery must work or hisuite ...
Отправлено с моего EVA-L09 через Tapatalk
raber111 said:
Erecovery must work or hisuite ...
Отправлено с моего EVA-L09 через Tapatalk
Click to expand...
Click to collapse
Tried but his itsays device not supported and e recovery says failed to get packages oh and ty for suggestions :good:
Stock recovery doesn't work too ?
Отправлено с моего EVA-L09 через Tapatalk
no
raber111 said:
Stock recovery doesn't work too ?
Отправлено с моего EVA-L09 через Tapatalk
Click to expand...
Click to collapse
no I tried every thing tried to flash stock twrp fast boot with reset command nothing is working the fast boot only shows remote command not allowed
of course you can't flash anything in fastboot because the phone locked . You can't get into stock recovery?
Отправлено с моего EVA-L09 через Tapatalk
no
raber111 said:
of course you can't flash anything in fastboot because the phone locked . You can't get into stock recovery?
Отправлено с моего EVA-L09 через Tapatalk
Click to expand...
Click to collapse
No this is the thing I am unable to go to stock recovery all it says downloading packages and then failed to get package or connect to new wifi
And if you put the update.app into dload folder in SD card and pressing volume up and down with power.. can you flash stock firmware?
Отправлено с моего EVA-L09 через Tapatalk
I don't have the firmware dload file and i tried to flash lo9 firmware but all it does blank screen then goes back to normal
I don't know what else can you do ...
Отправлено с моего EVA-L09 через Tapatalk
May be wait until hi suits supports my device
Any ways ty for ur time really appreciated
I'm sorry to hear that man, that really sucks.
Maybe you find some info here, looks like the same problem (didn't read through all of it) :
http://forum.xda-developers.com/nexus-9/help/to-toggle-allow-oem-unlock-via-fastboot-t3091119
I think this is very important to make clear in all guides dealing with unlocking etc to enable this option before doing anything, because it can lead to difficult situations. Just updated my posts with this info.
Finally, I just rooted my m31 phone without twrp!
Yes, I used the path method, and no I did not get any infinity boot loop.
It's working perfectly fine, I even installed some magisk modules already like iOS emoji font and unistalled some annoying samsung/google apps!
I'm not so sure if it will work worldwide, but for ZTO versions (Brazil) it worked.
This will certainly delete all your files. Make a backup of what you consider important and do at your own risk.
If you need any evidence that is working or you just let me know how can I help.
1) First of all, I put my phone on the last firmware version, which for me is M315FXXU2ATIB
If you're using a version before that and you have no OTA update available, you can download the firmware in specific websites like sammobile.com samfrew.com or stockrom.net and update it by yourself using Odin
2) With this firmware applied on your phone, make sure to use the boot.img attached on this post and paste it to your phone. Now go to magisk, and choose install, and then "select and patch a file". Magisk will give you a new file.
3) Unlock developer options, then set OEM unlocking to unlock your bootloader, and enable USB Debugging.
There's a lot of internet pages teaching this step
4) Shutdown your phone. Press and hold volume up and volume down at same time, hold it and then plug usb cable. Release up and down buttons, and on the next screen press Up to go to the bootloader.
5) Once there, open Odin, click on AP and select the magisk_patched.tar it will take like 2 or 3 seconds. You should see PASS on Odin and your M31 is probably restarting at this point. That's all, your M31 is rooted.
Big thanks to stockroom.net for the files!
useful links:
https://www.stockrom.net/2020/10/sm-m315f-b2-zto-10q-m315fxxu2atib.html
https://www.youtube.com/watch?v=M-AoLbShPI8&ab_channel=Rcelltutoriais
WTF
U legend
hi thank you for sharing this, but i want to know the origin of the file attached (boot.img). and can i go back to making my device unrooted ?
evilhilda said:
hi thank you for sharing this, but i want to know the origin of the file attached (boot.img). and can i go back to making my device unrooted ?
Click to expand...
Click to collapse
ok my bad i had to enable OEM unlock, after factory reset, i installed magisk to check ant it's rooted by wanted to make an update, after that the phone restarted and became very slow and unstable
evilhilda said:
ok my bad i had to enable OEM unlock, after factory reset, i installed magisk to check ant it's rooted by wanted to make an update, after that the phone restarted and became very slow and unstable
Click to expand...
Click to collapse
The img attached is the very same img on the AP file, which means is the original img. Is attached just to make it easy instead of make people extract the file manually.
You have to make sure you have the same firmware installed on your phone as the img before doing the process. It's working perfectly fine on my phone. If your phone became unstable you surely can go back to the stock firmware again using Odin, but the problem is probably the update you tried to do considering is not safe to update a root phone
Take a look here for updating a rooted phone
https://forum.xda-developers.com/galaxy-s10/help/how-to-upgrade-losing-root-twrp-t4042893
mvini_ab said:
The img attached is the very same img on the AP file, which means is the original img. Is attached just to make it easy instead of make people extract the file manually.
You have to make sure you have the same firmware installed on your phone as the img before doing the process. It's working perfectly fine on my phone. If your phone became unstable you surely can go back to the stock firmware again using Odin, but the problem is probably the update you tried to do considering is not safe to update a root phone
Take a look here for updating a rooted phone
https://forum.xda-developers.com/galaxy-s10/help/how-to-upgrade-losing-root-twrp-t4042893
Click to expand...
Click to collapse
Thank you for taking some time to explain the origin of the file, your method is working fine, and it is using magisk to root the device, it worked for my device which had the indian firmware, but its the same as the one rolling in brazil, the concern is that after unlocking the bootloader, factory resetting and installing the magisk created boot file, and running the update from magisk manager (because it requires it for some reason) the check comes out negative, i don't remeber exactly what it said but it was all in red and says that the check failed, honestly i don't understant this part maybe i didn't have to let magisk update & restart (also after trying to open build.prop editor for the first time and granting access it crased a restarted again).
Anyway, the main reason for me trying to root my device, was to enable camera2api to be able to use gcam ports properly, in which i failed miserably, apparently exynos processors aren't easy to enable camera2api using terminal, which renders the root futile in my case. I locked the bootloader and flashed the official rom again and it's working fine.
Thank you again and i hope some developer takes his precious time to make a good guide from rooting to usable gcam.
Can we update without losing root and data ?
evilhilda said:
Thank you for taking some time to explain the origin of the file, your method is working fine, and it is using magisk to root the device, it worked for my device which had the indian firmware, but its the same as the one rolling in brazil, the concern is that after unlocking the bootloader, factory resetting and installing the magisk created boot file, and running the update from magisk manager (because it requires it for some reason) the check comes out negative, i don't remeber exactly what it said but it was all in red and says that the check failed, honestly i don't understant this part maybe i didn't have to let magisk update & restart (also after trying to open build.prop editor for the first time and granting access it crased a restarted again).
Anyway, the main reason for me trying to root my device, was to enable camera2api to be able to use gcam ports properly, in which i failed miserably, apparently exynos processors aren't easy to enable camera2api using terminal, which renders the root futile in my case. I locked the bootloader and flashed the official rom again and it's working fine.
Thank you again and i hope some developer takes his precious time to make a good guide from rooting to usable gcam.
Click to expand...
Click to collapse
I don't think it's your fault for not being able to edit build.prop, from what I know it's a known issue with Android 10. You can check that on several websites. Have a look at this pages:
https://didgeridoohan.com/magisk/Magisk#hn_Cant_edit_system_files
And it looks like this guy found a solution by remounting, but I think is risky:
https://forum.xda-developers.com/apps/magisk/how-modify-priv-app-android-10-magisk-20-t4036633
ariefabuzaky said:
Can we update without losing root and data ?
Click to expand...
Click to collapse
That's the lastest version where I live, but I believe if you update it using Odin and the right settings like CSC HOME, yes, you can update without losing root and data.
i think cant access system, i cant uninstall system apps like Vodafone menu or galaxy store :/ am i wrong bro?
dtanil said:
i think cant access system, i cant uninstall system apps like Vodafone menu or galaxy store :/ am i wrong bro?
Click to expand...
Click to collapse
Install Root Checker to check if you actually have root access and made the process correctly. If not, you have to make it again following step by step carefully.
Once the process is finished and you have root access, go to magisk and allow the app you're using to see the system folder to have access through magisk.
To uninstall apps, I advice you to use this app, because at least on my M31, even Lucky Patcher and TitanumBackup wasn't able to uninstall system apps:
https://forum.xda-developers.com/android/apps-games/app-uninstall-apps-t3776235
Let me know if you're still need help
Stitched only patched boot.img. and it worked
gigabyteua said:
Stitched only patched boot.img. and it worked
Click to expand...
Click to collapse
Good to know. Thank you for the feedback
The method does not work on my European version (DBT) with *System as Root*.
Tried to use just the patched boot.img as suggested here (fail message in Odin) and the patched full AP file as suggested on Magisk website (reboots to download until reflashing the stock ROM).
xdausr11 said:
The method does not work on my European version (DBT) with *System as Root*.
Tried to use just the patched boot.img as suggested here (fail message in Odin) and the patched full AP file as suggested on Magisk website (reboots to download until reflashing the stock ROM).
Click to expand...
Click to collapse
you need to patch boot.img from the firmware that is currently installed, and not the one that is offered. Then, after the firmware, immediately go into recovery and do Wipe data / factory reset and Wipe Cache Partition. And then reboot into the system
gigabyteua said:
you need to patch boot.img from the firmware that is currently installed, and not the one that is offered. Then, after the firmware, immediately go into recovery and do Wipe data / factory reset and Wipe Cache Partition. And then reboot into the system
Click to expand...
Click to collapse
I had extracted the boot.img from my current firmware (M315FXXU2ATIC from SEP2020 with One UI 2.1 and new bootloader), patched it, flashed the tar via Odin, here I got the "failed" message in Odin.
Can you reconfirm if your Samsung firmware version has also System as root? Which region do you use?
xdausr11 said:
I had extracted the boot.img from my current firmware (M315FXXU2ATIC from SEP2020 with One UI 2.1 and new bootloader), patched it, flashed the tar via Odin, here I got the "failed" message in Odin.
Can you reconfirm if your Samsung firmware version has also System as root? Which region do you use?
Click to expand...
Click to collapse
Mod edit: Translation
I am from Ukraine, I am not strong in English, please excuse me. I will write in Russian, I hope you will understand.
After many unsuccessful attempts by various methods, I was overcome by paranoia and I began to do everything that was possible, perhaps not necessary.
1. Installed the latest Ukrainian region SEK - M315FXXU2ATIC with One UI 2.1 used CSC_OMC_OXM_M315FOXM2ATI6
2. Copied AP_M315FXXU2ATIC_CL19748244_QB34588175_REV00_user_ low_ship_meta_RKEY_OS10.tar to your phone
3. Installed CANARY from the forum 4pda.ru/forum/index.php?showtopic=774072 registration required to download
4. Patched all AP_M315FXXU2ATIC.
5. Copied magisk_patched.tar to computer
6 Opened magisk_patched.tar in 7zip and removed everything except boot.img vbmeta.img recovery.img.lz4
7. Deleted Google account, made a hard reset in the phone
8. Once again, enter Recovery and again Wipe data / factory reset and Wipe Cache Partition.
9. Initial setup without registration with Google and Samsung
10. Shutdown.
11. Entering the download mode - holding down both volume buttons and then connecting the cable.
in Odin auto reboot - remove the bird
12. I asked for magisk_patched.tar = bootloop
13. Deleted recovery.img.lz4 stitched = bootloop
14. Removed vbmeta.img I only asked for boot.img
15. Reboot as soon as the screen goes out immediately enter recovery
16.Wipe data / factory reset and Wipe Cache Partition again.
17. Finally, from recovery, reboot into the system.
Root received. System files are edited (deleted, renamed, file permissions, folders are created, etc.)
Я из Украины, в английском не силен прошу извинить. Напишу на русском надеюсь разберетесь.
После многих неудачных попыток разными методами меня охватила паранойя и я начал делать все что можно, возможно и не нужное.
1. Установил последнюю украинскую регион SEK - M315FXXU2ATIC с One UI 2.1 использовал CSC_OMC_OXM_M315FOXM2ATI6
2. Скопировал AP_M315FXXU2ATIC_CL19748244_QB34588175_REV00_user_low_ship_meta_RKEY_OS10.tar на телефон
3. Установил CANARY с форума 4pda.ru/forum/index.php?showtopic=774072 для скачивания необходима регистрация
4. Patched всю AP_M315FXXU2ATIC.
5. Скопировал magisk_patched.tar на компьютер
6 Открыл magisk_patched.tar в 7zip и удалил все кроме boot.img vbmeta.img recovery.img.lz4
7. Удалил учетную запись Google, сделал полный сброс (hard reset) в телефоне
8. Еще раз вход в Recovery и снова Wipe data / factory reset and Wipe Cache Partition.
9. Начальная настройка без регистрации в Google и Samsung
10. Выключение.
11. Вход в режим download - зажатые обе кнопки громкости и затем подключение кабеля.
в Odin auto reboot - снять птичку
12. Прошил magisk_patched.tar = bootloop
13. Удалил recovery.img.lz4 прошил = bootloop
14. Удалил vbmeta.img прошил только boot.img
15. Перезагрузка, как только экран погас сразу вход в recovery
16. снова Wipe data / factory reset and Wipe Cache Partition.
17. И наконец из recovery перезагрузка в систему.
Root получен. Системные файлы редактируются (удаляются, переименовываются, права файлам, папки создаются и.т.д.)
@gigabyteua
Just a friendly FYI my friend. If you would please review XDA Rule #4, and post accordingly, we would be very appreciative.
--Regards: Badger50
gigabyteua said:
Mod edit: Translation
Installed the latest Ukrainian region SEK - M315FXXU2ATIC with One UI 2.1 used CSC_OMC_OXM_M315FOXM2ATI6...
Click to expand...
Click to collapse
Thanks for all the details.
Can you reconfirm your firmware version is SAR (system as root) - this is shown in magisk manager.
Can you reconfirm you unlocked bootloader not only in developer mode but also in bootloader (long press volume up)?
Thanks.
xdausr11 said:
Thanks for all the details.
Can you reconfirm your firmware version is SAR (system as root) - this is shown in magisk manager.
Can you reconfirm you unlocked bootloader not only in developer mode but also in bootloader (long press volume up)?
Thanks.
Click to expand...
Click to collapse
yes unlocked in the developer menu and long press in bootloader mode
Can anyone please help me? I'm running out of options and I'm trying everything I can, I had a completely functional Nubia Z20 with global ROM in Android 9 but I wanted Android 11 so I installed the ROM easily from the phone itself and everything installed correctly but I didn't know it was a Chinese ROM, so I tried to go back and install the stock ROM but then the problem start, I got stuck in that message of "Corrupt Device".
After seen many videos, read in forums, attempts and fails I finally can unlock the bootloader and install TWRP, but I follow exactly the steps everyone recommend here, first before install the ROM I wipe the data, factory reset and now install the stock rom, everything goes fine but when I click on reboot it goes back to the message "Corrupt Device", than I read some post and did exactly what it says, after the installation of the ROM completes I do a factory reset instead of just click on reboot now, but now when I click on reboot it says "There is no O.S installed, do you want to continue?"
So I'm stocked, I don't know what else can I do, please if someone knows something that could help, I WOULD BE THANKFUL.
+1. Same issue. Please help. Installed Chines ROM. Tried to update back to Global and now stuck on "Corrupt Device"
@Alrick920 Can you guide me on the OS thing you did. I haven;t been able to get any sort of progress.
Thanks to the moderator for removing all links now people cannot solve their problems. This is no longer a forum!
inderjit1987 said:
+1. Same issue. Please help. Installed Chines ROM. Tried to update back to Global and now stuck on "Corrupt Device"
@Alrick920 Can you guide me on the OS thing you did. I haven;t been able to get any sort of progress.
Click to expand...
Click to collapse
Finally I could install the Android 11 CN ROM and the Gapps, it was so hard to do it on my own but I'm going to resume the process.
Well, there's one thing that help me to understand exactly why I was struggling so much to unbrick it, but someone in a video tell me that you can't go back from Android 11 to Android 9, there's something to do with the kernel not being downgradable, so if you install the CN ROM in Android 11 you can't go back, but as we tried to install Android 9 again and it isn't possible you brick your Nubia.
So, what I did was this (I can't give you the links or tell you exactly where I download some thing because I download a lot of things and it's confusing where I got the files), ATTENTION: IF YOUR PHONE SHOWS THE COMPLETELY WHITE NUBIA LOGO WHEN THIS TRIES TO BOOT IT'S BECAUSE YOUR PHONE IT'S BRICK BUT WITH ANDROID 11 SO JUMP DIRECTLY TO STEP 5, IF THE LOGO IT'S RED AND WHITE YOUR STUCK BUT WITH ANDROID 9.
1- Install all the drivers of Nubia Z20, Qualcomm Drivers and the ADB drivers, make sure these are installed correctly by opening the ADB as if you were trying to open the bootloader, put it on fastboot mode, connect to PC and put the command: fastboot devices.
You have to see the serial number of your phone in the window, if that's what it shows, then the drivers are correctly installed.
2. Search from a page the TWRP For Nubia Z20 Android P, that's easy to find, it's a program in some strange language that do everything by itself a just putting the phone in fastboot and press the button in the program.
3. After the install of the TWRP finished select recovery mode in your Nubia Z20, it will open the TWRP, now you have to click on factory reset and then wipe data, after that using a USB and OTG or just transfer directly to the internal storage the CN ROM Android 11 Nubia Z20, the official Nubia page has the ROM, it's the V3.17 and weights around 3.2 GB.
4. Now go to install and look the ZIP, click on it and install the ROM, when it finish, will boot normally.
5. Your phone already will be unbricked, if you are bricked in Android 11, go directly to download the TWRP that I will send you and download the correct CN ROM V3.17 Android 11 and install it, when it boots normally the problem now are the Google Apps, for that we have to download the TWRP for Android 11, that was the difficult part, I HAVE THE DOWNLOAD LINK OF TWRP FOR NUBIA Z20 ANDROID 11, I FOUND IT AFTER A DEEP SEARCH, SEND ME MESSAGE AND I WILL SEND IT TO YOU, apparently the key was searching it as Android R instead of 11, I found the file of the same good person that wanted to help us in a post here and the moderator erased, send me a message and I send you the link.
Gizor said:
Thanks to the moderator for removing all links now people cannot solve their problems. This is no longer a forum!
Click to expand...
Click to collapse
I know, this complicate us the this more than it already was, but I found the TWRP Android 11 link from Suriyas, I can't put the link here because they will remove it again, send me a message and I give you the link to solve all the problems.
@Kintamo888 Mod edit - translated by https://www.deepl.com/translator:
Hi! Help please, I have Zte Z20 turned into a brick, I flashed through adb and twrp, even fire hose firmware, but it does not help, depends the same thing that the phone can not be trusted, it will not boot, please help me with global firmware v1.03, even flashed Unbrick tool (Non EU), and it too has not helped, tried everything, does not boot, please help, if possible send a file or links to this email , [email protected], thanks in advance
*******************************
Привет! помогите пожалуйста, у меня Zte Z20 превратился в кирпич, я прошивал через adb и twrp, даже прошивку пожарного шланга, но не помогает, зависит то же самое что телефону нельзя доверять, он не загружается, помогите пожалуйста у меня с глобальной прошивки v1.03, даже прошил инструмент Unbrick (Non EU), и он тоже не помог, все перепробовал, не загружается, помогите пожалуйста, по возможности пришлите файл или ссылки на эту почту , [email protected], заранее спасибо
Alrick920 said:
Finally I could install the Android 11 CN ROM and the Gapps, it was so hard to do it on my own but I'm going to resume the process.
Well, there's one thing that help me to understand exactly why I was struggling so much to unbrick it, but someone in a video tell me that you can't go back from Android 11 to Android 9, there's something to do with the kernel not being downgradable, so if you install the CN ROM in Android 11 you can't go back, but as we tried to install Android 9 again and it isn't possible you brick your Nubia.
So, what I did was this (I can't give you the links or tell you exactly where I download some thing because I download a lot of things and it's confusing where I got the files), ATTENTION: IF YOUR PHONE SHOWS THE COMPLETELY WHITE NUBIA LOGO WHEN THIS TRIES TO BOOT IT'S BECAUSE YOUR PHONE IT'S BRICK BUT WITH ANDROID 11 SO JUMP DIRECTLY TO STEP 5, IF THE LOGO IT'S RED AND WHITE YOUR STUCK BUT WITH ANDROID 9.
1- Install all the drivers of Nubia Z20, Qualcomm Drivers and the ADB drivers, make sure these are installed correctly by opening the ADB as if you were trying to open the bootloader, put it on fastboot mode, connect to PC and put the command: fastboot devices.
You have to see the serial number of your phone in the window, if that's what it shows, then the drivers are correctly installed.
2. Search from a page the TWRP For Nubia Z20 Android P, that's easy to find, it's a program in some strange language that do everything by itself a just putting the phone in fastboot and press the button in the program.
3. After the install of the TWRP finished select recovery mode in your Nubia Z20, it will open the TWRP, now you have to click on factory reset and then wipe data, after that using a USB and OTG or just transfer directly to the internal storage the CN ROM Android 11 Nubia Z20, the official Nubia page has the ROM, it's the V3.17 and weights around 3.2 GB.
4. Now go to install and look the ZIP, click on it and install the ROM, when it finish, will boot normally.
5. Your phone already will be unbricked, if you are bricked in Android 11, go directly to download the TWRP that I will send you and download the correct CN ROM V3.17 Android 11 and install it, when it boots normally the problem now are the Google Apps, for that we have to download the TWRP for Android 11, that was the difficult part, I HAVE THE DOWNLOAD LINK OF TWRP FOR NUBIA Z20 ANDROID 11, I FOUND IT AFTER A DEEP SEARCH, SEND ME MESSAGE AND I WILL SEND IT TO YOU, apparently the key was searching it as Android R instead of 11, I found the file of the same good person that wanted to help us in a post here and the moderator erased, send me a message and I send you the link.
Click to expand...
Click to collapse
Hi Alrick920,
I'm stuck on boot up screen, after installing TWRP, my Z20 is on CN rom, probably i had the wrong version of TWRP. Can you help me with the link of the TWRP and ver. 3.17 rom that you have?
Thank you in advance.
Alrick920 said:
I know, this complicate us the this more than it already was, but I found the TWRP Android 11 link from Suriyas, I can't put the link here because they will remove it again, send me a message and I give you the link to solve all the problems.
Click to expand...
Click to collapse
Hi, Alrick920.
appreciate if you can just point me to the links that helped you to resolve your bricked Z20?
email : [email protected]
thanks
cksy1112 said:
Hi, Alrick920.
appreciate if you can just point me to the links that helped you to resolve your bricked Z20?
email : [email protected]
thanks
Click to expand...
Click to collapse
Click the blue name Alrick920 from one of the posts
Then click start a conversation
Can you help me explaining how to activate the bootloader? and sharing the device drivers please
Hello, I decided to install the official firmware via BPRP and now, after turning it on, it reboots every five seconds, it does not enter the recovery, only fastboot. What to do?
diiimon said:
Hello, I decided to install the official firmware via BPRP and now, after turning it on, it reboots every five seconds, it does not enter the recovery, only fastboot. What to do?
Click to expand...
Click to collapse
Flash the recovery through fastboot
then do fastboot reboot recovery
Kenora_I said:
Прошить рекавери через fastboot
затем выполните восстановление перезагрузки fastboot
Click to expand...
Click to collapse
где скачать рекавери?