Hello! I tried to update my unit during the upgrade RK3188 and trailed off and has not reignited . Or with "hard reset" . I checked fuse , food and all the connections and everything is fine . If I connect to this PC does not recognize anything . Is there any way to recover this "brick " .
Thanks for reading
Dp78 said:
Hello! I tried to update my unit during the upgrade RK3188 and trailed off and has not reignited . Or with "hard reset" . I checked fuse , food and all the connections and everything is fine . If I connect to this PC does not recognize anything . Is there any way to recover this "brick " .
Thanks for reading
Click to expand...
Click to collapse
Have you tried holding down reset and power then releasing reset ? ADB only works on the front usb port.
Yes, I just try the method you describe. The computer detects a device but can not install the driver that says the device has an error ??? . I see difficult solution but I appreciate any help .
Dp78 said:
Yes, I just try the method you describe. The computer detects a device but can not install the driver that says the device has an error ??? . I see difficult solution but I appreciate any help .
Click to expand...
Click to collapse
I would search the original thread, especially the beginning, theres posts in there about getting ADB working and try the wiki.
Read through this
http://forum.xda-developers.com/and...d-kgl-unit-t3457538/post68656680#post68656680
Related
please help me :- after our long wait for 2.2 to become avail for my galaxy s i was over the moon when i was 'allowed' to upgrade but to my horror when downloading to the phone windows vista decided it didn't recognize my device and terminated connection.
ive tried a few things since to try to rectify , i've deleted then reinstalled kies , kies was also telling me to go into recovery mode which my unit doesn't do , the phone & pc communicate fine to upload & download reg media etc it just seems that when digging android is doing his thing on my screen the pc decides NO!!!!!.
Also after each attempt to upgrade the phone seems to be un-affected and will boot & work without any problems.
As i said before please help as i bought android rather than sellout to you know who and all my 'i' mates are laughing.........
i'm desperate guys please help or point me in the right direction.
ongy69 said:
please help me :- after our long wait for 2.2 to become avail for my galaxy s i was over the moon when i was 'allowed' to upgrade but to my horror when downloading to the phone windows vista decided it didn't recognize my device and terminated connection.
ive tried a few things since to try to rectify , i've deleted then reinstalled kies , kies was also telling me to go into recovery mode which my unit doesn't do , the phone & pc communicate fine to upload & download reg media etc it just seems that when digging android is doing his thing on my screen the pc decides NO!!!!!.
Also after each attempt to upgrade the phone seems to be un-affected and will boot & work without any problems.
As i said before please help as i bought android rather than sellout to you know who and all my 'i' mates are laughing.........
Click to expand...
Click to collapse
It might be your antivirus or any other program using/ connected to your phone other than kies.
You can do few possible things, of I can think of
1. Turn off your antivirus during upgrade
2. use another USB cable
3. restart the mobile
4. check if you can copy/ paste files from/ to mobile/ computer
5. If yes, you should be able to upgrade through Kies
6. Sometimes Samsung server is down
If it doesnot help, let me know
many thanks I will try this asap
well ive tried the anti-virus & firewall thing with no effect,is there a coinsidence that my model doesn't have 3 button reset and this problem? unfortunately im not pc savy enough to know where the files are on the pc to copy n paste. i did try a diferent cable & after each attempt to ugrade & device not recognized the phone will only start after ive whipped the battery out ...........................so once again any help would be great , thanks.
ongy69 said:
well ive tried the anti-virus & firewall thing with no effect,is there a coinsidence that my model doesn't have 3 button reset and this problem? unfortunately im not pc savy enough to know where the files are on the pc to copy n paste. i did try a diferent cable & after each attempt to ugrade & device not recognized the phone will only start after ive whipped the battery out ...........................so once again any help would be great , thanks.
Click to expand...
Click to collapse
Dear I am not sure what wrong there, as you said 3 Button combo is not working, I would suggest to enable it 1st from here
http://forum.xda-developers.com/showthread.php?t=810686
Once it is working, you will be able to flash/ install any firmware
maybe If you open Kies as Administrator, it might solve your problem or 1st repair the windows using windows CD and then open kies as Admin and try the same process. I hope you understand I am just guessing what might be the problem with your PC
I own a Galaxy S GT-i9000( bought at SFR)
When I connect it to computer I get the prompt that tells to choose between Storage, Kies...
But whatever I choose the computer tells me USB Device not recognised.
Now I was stupid enough to do the following:
I managed to root using Z4root by copying the APK file on external sd .
I got rom manager and updated my recovery.
I updated using the CM10-unofficial rom that is in the development forum: http://forum.xda-developers.com/showthread.php?t=1775169
The Mobile Network was not working so I did the following
I restored the nand that i did in recovery and now the phone is frozen on the first boot screen (Galaxy S GT-i9000 SCREEN)
Now I can go to Download mode but I can't go to recovery mode.
Let me remind you that my USB data connection is not working. So even though I enter into the Download mode I am not able to use Odin. If you know somthing that I am not doing, let me know.
So now I am looking for a solution that would permit me to flash without USB or allow me to go to recovery mode. Or a tutorial on how to change the usb port myself.
Thanks in advance.
kigordid said:
So now I am looking for a solution that would permit me to flash without USB or allow me to go to recovery mode. Or a tutorial on how to change the usb port myself. Thanks in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=29464733&postcount=10
You can try using Mobile Odin.
Also, you can try Heimdall method: https://www.fixmystuff.in/FMS_Forum...-flashing-to-original-rom-using-heimdall.126/
Hey
have you tried to connect it in Download mode??
Need more solutions
Thanks again to all of you that have answered me so fast.
Well I just finished trying all that you suggested.
unfortunately am still at the same point. Whatever I do, whatever drivers am putting in, cleaning inside the USB port with methylated spirit... Not getting Odin or Kies to detect it.
I read somewhere that when the data connection works, I should see the device named Samsung Device even before installing the drivers, but all I am getting is Unknown device. I still went ahead uninstalling and installing the drivers you provided and there is no successful outcome so far.
I still have faith. I have a little knowledge in electronics. I can open my phone and get to the usb port. My problem is I don't get any tutorial on how to replace the usb port. The thing is the connections are very tiny. I can also do with a bypass way that could make me install a 2nd usb port temporarily just long enough to flash the phone.
Or a hardware solution if I have to remove and flash a specific IC in a certain manner.
Thank you in advance.
help
hi there,
after doing alot of stuff to your phone that wasnt nessacary i'm not surprised it doesnt work er sorry . the only thing i can think of is the following whenever i have a problem with windows i go to linux, which is faster , much more efficient . so i suggest that you install linux ( ubuntu the best ) and try using odin with the linux version, it often detects things that windows doesnt see. other than that sorry cant think of anything else .
see ya
Trying it
thesmegger said:
hi there,
so i suggest that you install linux ( ubuntu the best ) and try using odin with the linux version, it often detects things that windows doesnt see.
see ya
Click to expand...
Click to collapse
Thank you.
Am going to boot on linux right away. I will let you know.
Back to zero
kigordid said:
Thank you.
Am going to boot on linux right away. I will let you know.
Click to expand...
Click to collapse
It doesn't change anything.
Am back to my start point.
Thank you though.
Anything Else?
Does anyone have something else to suggest or I should consider my phone dead?
Look like a quite number of people are having this same issue and haven't got over it.
I just hang on and appeal to all of you cos I know XDA is the best place where I can get a solution.
Lemme know any suggestion... even the ones you are not sure can help. Am willing to do anything.
Thanks again all of you.
hi
hi there
if all else fails there is a jig
http://forum.xda-developers.com/showthread.php?t=1402286
this forces your phone into download mode and will help for sofy bricks so look it up on the link and try that , sometimes on local forums like we have in france members will comme over and lend you one , or just buy one eyc .
hope that helped
see ya :good:
Uninstall from PC Kies, instal samsung drivers, then download and flash mod 2.3.4 xxjvp stock? / Or other, 3.PDA, PHONE, CSC / pit is 512 and re-partition and start to turn in Odin.
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Nardocf said:
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Click to expand...
Click to collapse
Maybe the issue is the cable mate.'......try to change it.
Hope it helps
O2X with Magical ROM and supersonic kernels from my buddies
Hm... Tell us something more about the ROM, baseband and everything you have now on it ?
SREEPRAJAY said:
Maybe the issue is the cable mate.'......try to change it.
Hope it helps
O2X with Magical ROM and supersonic kernels from my buddies
Click to expand...
Click to collapse
I already done this but the usb won't work and the same cable works with another p990. :crying:
torq1337 said:
Hm... Tell us something more about the ROM, baseband and everything you have now on it ?
Click to expand...
Click to collapse
At the moment with Gueste2X_GoodBye-2.0 + gestekrnl 2.1 without oc, baseband 0725.
Did you try to switch mode? From "mass storage" to "mtp"?
amagyar said:
Did you try to switch mode? From "mass storage" to "mtp"?
Click to expand...
Click to collapse
No. How can i try this?
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Iconoclasm said:
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Click to expand...
Click to collapse
Can't enter into this menu usb-connection(pc) when i press menu button nothing happens.. I think we are in the same boat because my phone can't be recognized in apx mode/ sw mode ..
Iconoclasm said:
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Click to expand...
Click to collapse
The same is happening with my p990 to. I can´t connect to pc with pc connection. To transfer data i use the card reader or with airdroid who it make with wifi.
Others users that had this problem they sent the phone in warranty and Lg have changed their mainboards. So if you have warranty go and solve your problem with your LG shop. It´s seems that is not any solution to solve this annoying problem with this bad hardware
Hello, same problem here. Well, "you need to send it to LG".. but there's one problem. I have MIUI and I can't flash back original ROM without nvflash. How to deal with it?
Try this: open LG update tool > options > "?recover (phone)? " > do by imei > enter serial and imei. LG update tool checks baseband for updates, for recovery idk, but I guess recovery cm only needs the numbers entered. Worth a try, and I'd like to know too.... Thanks Ferrum Master, you made me know about this function
SuperSkill said:
Try this: open LG update tool > options > "?recover (phone)? " > do by imei > enter serial and imei. LG update tool checks baseband for updates, for recovery idk, but I guess recovery cm only needs the numbers entered. Worth a try, and I'd like to know too.... Thanks Ferrum Master, you made me know about this function
Click to expand...
Click to collapse
well at mine don´t works. thank you very much for you solution.
I have the same problem. It's not possible to connect to the phone either by LG tool or as mass storage. I've tried different cables, computers and cleaning the connector in the phone without success. I'm running stock GB.
I would really like to root the phone to be able to flash CM10. Is there any way to do this without USB connection?
Edit: I've already tried NVFlash and SuperOneClick
I had the same problem last weeked and i manage to solve it, im busy right now but I promise i'll tell you how i solved it later today or tomorrow
Sent from my Optimus 2X using xda app-developers app
Nardocf said:
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Click to expand...
Click to collapse
Hey hello, I wrote yesterday and told you that I would teach you how to fix this bug, I'm almost done with the tutorial, I had to make all over again so I could tell you step by step, unfortunately, the fix I found is temporal, so, I'm trying one more thing to see if I can make it permanent, and also, i'm wating for Hulk to answer me where to post this fix, 'cuz you're not the only one with this problem, so I think would be better to create a thread with my solution, i'm sorry if I could not give you the instruccions today but I think later today or tomorrow hulk will tell me where to put it, as soon as I post the solution, I'll post here a link to the thread, just wait a bit more
greetings
I just posted my solution, you might want to give it a shot
Look here
http://forum.xda-developers.com/showthread.php?p=33870935#post33870935
Hi,
When I am trying to upgrade my phone (GT-N7000) from ICS to Jelly bean OS in between this process the phone struck up in a stage for long time so that I disconnect the battery and try to on the phone by pressing switch. In the phone there is no response and I try to hard reset the phone that time too no response in my phone. After that I saw a forum in the XDA as per that I used Riff box to recover my phone by resurrection method with the help of a professional, In the process the phone responses for some command after the resurrection. There was nothing happened in my phone. But the change is now when I am connected the phone to computer it detects in the usb mode but it requires sec s5pc210 test b/d driver. I created a forum for this driver requirement. For that forum I got a suggestion
‘You can try the latest Samsung USB Driver.
Just install it and follow the instructions as said in the thread. Hope it helps’
Click to expand...
Click to collapse
I had done the same thing. After that too the device manager displays the same error. Please help me to trouble shoot the problem and to reboot my phone. When I am charging the phone the battery got heat. Please suggest me the possible ways to recover my phone. Thanks in Advance
Saravanan.
I just search for the driver message here in the forum (after googling without result).
There are a few threads with Galaxy devices with this problem - from what I read the devices are "dead". Repair by Samsung necessary.
For the Nexus S I read about a solution that Adam Outler wrote for it (called "UnBrickable Ressurector").
It's a java app you have to use in a debian linux environment.
BUT: There's no "sign" in the thread that it works for the N7000!.
All other threads asking for help in this case didn't show a solution
So you should read and research yourself there. Maybe you find some hints how to do it.
I guess only real repair will help you.
Please help out I have a AOSON M19 Bricked TAB,
I tried to recover the TAB to factory settings, It gone bad during recovery.
when I tried to connect using RKAndroidTool 1.35 It shows the tab like Found RKAndroid Maskrom Rock UBS, but giving error while updating the Image. I found the stock ROM 4.0 update.
I also Tried RKBatch Tool.
I have opened the TAB tried Shorting 7n8 pin on NAND chip tried to boot but failed,
in the PC it is showing RK30 Device but in RKBatch tool it is showing RK29
I have googled everything not able to found solution
Kindly anyone help out its my customer's TAB as I am unable to answer Him
sathvik1 said:
Please help out I have a AOSON M19 Bricked TAB,
I tried to recover the TAB to factory settings, It gone bad during recovery.
when I tried to connect using RKAndroidTool 1.35 It shows the tab like Found RKAndroid Maskrom Rock UBS, but giving error while updating the Image. I found the stock ROM 4.0 update.
I also Tried RKBatch Tool.
I have opened the TAB tried Shorting 7n8 pin on NAND chip tried to boot but failed,
in the PC it is showing RK30 Device but in RKBatch tool it is showing RK29
I have googled everything not able to found solution
Kindly anyone help out its my customer's TAB as I am unable to answer Him
Click to expand...
Click to collapse
I believe that the bootloader partition is corrupted....No way to help that...Try to JTAG it...
BlackSoulxxx said:
I believe that the bootloader partition is corrupted....No way to help that...Try to JTAG it...
Click to expand...
Click to collapse
Dear Fried
Can you please briefly explain what is JTAG
and how can I try it????
sathvik1 said:
Dear Fried
Can you please briefly explain what is JTAG
and how can I try it????
Click to expand...
Click to collapse
Since you are not familiar with it...http://en.wikipedia.org/wiki/Joint_Test_Action_Group
Buy some tool to JTAG eMMC...