hello together,
my doogee x5 shows strange behavior.
the pohne has root, this is clear and works fine.
now i try to install a recovery image, this i try by different ways and it says okay (done).
i try it more than 10 times with the sp flash tool, and more than 5 times with rashr.
allways the final screen shows okay by both methods, but when i boot in recovery nothing happens.
any idears for this strange behavior?
big thx
trek
Try to find its stock rom either by the official doogee site or another that you trust. I can suggest you some but i guess that you already searched for them. Then try to flash it by the sp tool. It depends on your device and basebrand version if its recovery should be suitable to recover your bricked device.
Flash the Infinix Hot 2 6.0 completely and the twrp of it wil be your new recovery,it worked for me with even unrooted x5
Related
EDIT : I got rid of the problem and managed to root my phone.
I'm having trouble rooting the K3 note flashed with VIBE UI 3.0. I'm using Lenovo K50a40, Indian Version and I flashed the Dev version of Vibe UI ROM (v 3.0 from hackerpower's signature) . The flashing went all fine. Then I tried to reroot the phone but I noticed that the recovery was the stock one. So I proceeded to reflash the recovery using fastboot but it showed that the file had been downloaded but could not be flashed to the recovery partition. I thought of using SP Flash Tool to flash the recovery. I flashed AthlonX's material TWRP recovery and it flashed okay. Then on rebooting the phone I find it remains stuck on the boot logo with Lenovo written on white backdrop. There's also text written in a small black strip on the bottom left which says "=>Tool DL Image Fail" . The phone stays on that screen for a minute or two and then goes out. Earlier I couldn't boot into the phone due to the above mentioned problem. Then I waited for the battery to drain and then powered the phone on normally (without pressing the button combination for recovery mode) and the phone booted up just fine but the recovery was the stock one .
From all this, there's one thing I've concluded- that this phone has some kind of defense mechanism that protects against installing a custom recovery. This occurred even when I tried rooting on Stock 2.5 VIBE UI. That time I overcame the problem by flashing recovery using fastboot and then booting directly into the recovery instead of system. Now, however, fastboot isn't able to flash the recovery (the transfer of the image is successful but the flashing fails) .
Finally, I request anyone who can help me in any way to Root the phone or to get a recovery installed to please reply.
Thanks.
how were you able to root it
Lord AJ said:
EDIT : I got rid of the problem and managed to root my phone.
I'm having trouble rooting the K3 note flashed with VIBE UI 3.0. I'm using Lenovo K50a40, Indian Version and I flashed the Dev version of Vibe UI ROM (v 3.0 from hackerpower's signature) . The flashing went all fine. Then I tried to reroot the phone but I noticed that the recovery was the stock one. So I proceeded to reflash the recovery using fastboot but it showed that the file had been downloaded but could not be flashed to the recovery partition. I thought of using SP Flash Tool to flash the recovery. I flashed AthlonX's material TWRP recovery and it flashed okay. Then on rebooting the phone I find it remains stuck on the boot logo with Lenovo written on white backdrop. There's also text written in a small black strip on the bottom left which says "=>Tool DL Image Fail" . The phone stays on that screen for a minute or two and then goes out. Earlier I couldn't boot into the phone due to the above mentioned problem. Then I waited for the battery to drain and then powered the phone on normally (without pressing the button combination for recovery mode) and the phone booted up just fine but the recovery was the stock one .
From all this, there's one thing I've concluded- that this phone has some kind of defense mechanism that protects against installing a custom recovery. This occurred even when I tried rooting on Stock 2.5 VIBE UI. That time I overcame the problem by flashing recovery using fastboot and then booting directly into the recovery instead of system. Now, however, fastboot isn't able to flash the recovery (the transfer of the image is successful but the flashing fails) .
Finally, I request anyone who can help me in any way to Root the phone or to get a recovery installed to please reply.
Thanks.
Click to expand...
Click to collapse
i have been using the sp flash tool to download the recovery i want and every time goes back to the stock one
obviously i lost my gapps with the update
but i dont have the google play services issue since i had to re install stock rom and never update google services and just when ahead and applied the updates 2.8 and 3.0,
do you have any ideas
daniiaroxyo said:
i have been using the sp flash tool to download the recovery i want and every time goes back to the stock one
obviously i lost my gapps with the update
but i dont have the google play services issue since i had to re install stock rom and never update google services and just when ahead and applied the updates 2.8 and 3.0,
do you have any ideas
Click to expand...
Click to collapse
If the recovery goes back to stock then you should probably try to boot into the recovery before rebooting to system after SP Flash Tool has done it's job.
Hi so I down loaded one more time the recovery thru sp tool
But this time I took the battery out for few seconds instead of rebooting right away
And it worked
Once I rooted back the phone I tried flashing the gapps but it didn't work
I tried changing the permission s thru root explorer for the google base app as I so on a post and nothing
Any ideas
Hello everyone
I brick my device yesterday by reflashing franco kernel r2 on top of r1 , then suddenly my device behavior was so strange it boot me into the device but i lost google services and the 2nd restart i stuck out
i tried to use twrp cant boot into it to restore
i tried many method but nothing happens
i tried to flashboot boot.img , flashboot system system.img (cant)
then i tried to install the stock recovery and that went successfully but when i try to boot into it i get stuck
so all recoveries not working stock and twrp
i already unlocked my device
any idea?
Here's the unbrick too thread for this device. I know it works because I did the same thing the other day flashing Franco from r1 to r2. Enjoy and make sure you read all directions carefully.
http://forum.xda-developers.com/oneplus-3t/help/unbrick-unbrick-tutorial-oneplus-3t-t3515306/page2
let me explain everything why have i created this thread.
My phone was only charging when switched off. I was on Lineage OS (by daniel_hk) at that time so i thought it is because of that custom ROM.
I, then, intended to flash stock ROM, this one: https://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537
debloated version.
I booted into TWRP recovery (v3.1.1-2 by daniel_hk).
Wiped everything and tried flashing K3 Note S433 Debloated ROM from the link i mentioned above. I received error 7. Now i was stuck without any OS in the phone.
Then I tried to flash other version of twrp (3.1.1-0) in phone using sp flash tool but received another error- "PMT is changed for the ROM! It must be downloaded" :/
I googled and found the solution is format the flash using sp flash tool. I did it and flashed the recovery but my phone went dead completely! No responses at all.
Finally i decided to install the original S433 ROM in K3 Note using SP Flash tool but then i receved another error - "BROM: Error 4008"
Then I tried another version of SP Flash tool, v5.1628 (previously v5.1604), Received the PMT changed error then formatted again then flashed the Original ROM.
Now my phone is Unbricked but still not charging and i have no IMEI also.
Favours/Helps that i want-
1. Main thing i want my phone to charge when it is powered on. Watched this video on youtube https://www.youtube.com/watch?v=N7qtDMu_WTU but I am not able to enter Engineering Mode.
2. I want to install debloated version of this ROM through TWRP and for that i have to flash twrp now but to flash TWRP i will need to format using SP Flash tool first (becuase of error "PMT is Changed in the ROM") and if i do that my phone will be bricked again! If i somehow flashed the recovery then i'll not be able to flash the debloated version of the ROM because of the "Error 7".
3. Want my IMEI back
Any Help will be really appreciated.
And sorry if any similar thread already exists I couldn't find the best solution for me anywhere so i created my own!
dude , first thing to remember;
even if your os is completely gone and recovery option is still working , then don't ever do these stupid things.
I've been in your place . But i always knows that if your recovery is still working then there's 99.9% you can fix it.but it seems like you've ruined everything with other flash tools. Dude , unlike every phones, k3 note has it's own k3 note manager software available in xda forums. You can download twrp backups here . Lenovo stock rom backup was here, only you have to do is download and place it on the correct folder. Then press restore!!!
But you ruined everything. I don't know if it turn on again. You came here after all of this and asking us to help now? I
install a custom rom after installing the stockrom (which got error7 during install)
after u get error7 when installing the firmware,,you wont have any os for the phone to boot.
just flash someother custom rom after u got that error.. phone will boot up.
Please compare whether all files of the stockrom you downloaded are extracted,i got error 7,and when i investigated the reason was that one of the file inside the rar file was not extracted.which inturn caused error during instalation
aK_mr3'ofive said:
let me explain everything why have i created this thread.
My phone was only charging when switched off. I was on Lineage OS (by daniel_hk) at that time so i thought it is because of that custom ROM.
I, then, intended to flash stock ROM, this one: https://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537
debloated version.
I booted into TWRP recovery (v3.1.1-2 by daniel_hk).
Wiped everything and tried flashing K3 Note S433 Debloated ROM from the link i mentioned above. I received error 7. Now i was stuck without any OS in the phone.
Then I tried to flash other version of twrp (3.1.1-0) in phone using sp flash tool but received another error- "PMT is changed for the ROM! It must be downloaded" :/
I googled and found the solution is format the flash using sp flash tool. I did it and flashed the recovery but my phone went dead completely! No responses at all.
Finally i decided to install the original S433 ROM in K3 Note using SP Flash tool but then i receved another error - "BROM: Error 4008"
Then I tried another version of SP Flash tool, v5.1628 (previously v5.1604), Received the PMT changed error then formatted again then flashed the Original ROM.
Now my phone is Unbricked but still not charging and i have no IMEI also.
Favours/Helps that i want-
1. Main thing i want my phone to charge when it is powered on. Watched this video on youtube https://www.youtube.com/watch?v=N7qtDMu_WTU but I am not able to enter Engineering Mode.
2. I want to install debloated version of this ROM through TWRP and for that i have to flash twrp now but to flash TWRP i will need to format using SP Flash tool first (becuase of error "PMT is Changed in the ROM") and if i do that my phone will be bricked again! If i somehow flashed the recovery then i'll not be able to flash the debloated version of the ROM because of the "Error 7".
3. Want my IMEI back
Any Help will be really appreciated.
And sorry if any similar thread already exists I couldn't find the best solution for me anywhere so i created my own!
Click to expand...
Click to collapse
i hv facing same issue try every think bt nothing is work thn i hv flash my phone sp flash with original stock rom and when i flash i untk recovery option bcoz in 89 percent i got error than aftr untk it successfully flash and when i start i only show twrp thn i reconnect my phone to pc and untck all in stock rom only tck recovery and successfully flash recover and restart my mobile....... and boom its work nw i very happy
aK_mr3'ofive said:
let me explain everything why have i created this thread.
My phone was only charging when switched off. I was on Lineage OS (by daniel_hk) at that time so i thought it is because of that custom ROM.
I, then, intended to flash stock ROM, this one: https://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537
debloated version.
I booted into TWRP recovery (v3.1.1-2 by daniel_hk).
Wiped everything and tried flashing K3 Note S433 Debloated ROM from the link i mentioned above. I received error 7. Now i was stuck without any OS in the phone.
Then I tried to flash other version of twrp (3.1.1-0) in phone using sp flash tool but received another error- "PMT is changed for the ROM! It must be downloaded" :/
I googled and found the solution is format the flash using sp flash tool. I did it and flashed the recovery but my phone went dead completely! No responses at all.
Finally i decided to install the original S433 ROM in K3 Note using SP Flash tool but then i receved another error - "BROM: Error 4008"
Then I tried another version of SP Flash tool, v5.1628 (previously v5.1604), Received the PMT changed error then formatted again then flashed the Original ROM.
Now my phone is Unbricked but still not charging and i have no IMEI also.
Favours/Helps that i want-
1. Main thing i want my phone to charge when it is powered on. Watched this video on youtube https://www.youtube.com/watch?v=N7qtDMu_WTU but I am not able to enter Engineering Mode.
2. I want to install debloated version of this ROM through TWRP and for that i have to flash twrp now but to flash TWRP i will need to format using SP Flash tool first (becuase of error "PMT is Changed in the ROM") and if i do that my phone will be bricked again! If i somehow flashed the recovery then i'll not be able to flash the debloated version of the ROM because of the "Error 7".
3. Want my IMEI back
Any Help will be really appreciated.
And sorry if any similar thread already exists I couldn't find the best solution for me anywhere so i created my own!
Click to expand...
Click to collapse
hows your phone?? alive??
I have bricked my phone after Magisk install fail.
I first unlocked bootloader succesfully
then i installed twrp succesfully
then i flashed magisk using twrp - this failed and sent device to erecovery. (which won't find package)
i used twrp to wipe data, now i was able to boot, and it installed like a fresh EMUI. However, almost all apps were broken- could not download themes/camera shut down etc.
To fix this, i wanted to restore to stock and did the following: download update package for my VTR-L09 of EMUI b175 (I was on b162 before), used Huawei Update Extractor to extract files and flashed BOOT.IMG, SYSTEM.IMG and RECOVERY.IMG. This was done without error.
Now my phone won't boot at all. I am stuck at the 'your device can't be trusted' screen. I cannot go into recovery. When I connect via USB, I hear the chime in Windows but I can't seem to connect with ADB.
What to do now?? Am I hard-bricked? I hope that anyone knows how to deal with my phone bricked like this. Please help me to solve this issue.
Best of wishes.
Edit: I am able to enter forced recovery, however updates fail at 5%.
I am also able to fastboot with USB, however I am unsure what to do next.
I unbricked my phone! Many thanks to who ah way and his solution found here: https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
:victory:
why are you doing it when you dont understand it?
You cannot flash part of B175 firmwar eover B162 firmware.. OMG.
use the HWOTa to go back to stock and please stop playing with the device without propper knowledge
So I was messing around with my newly bought M4 Pro 5G and I wanted to root it. I started the process of unlocking the phone(bootloader) a week ago and just yesterday I was actually able to do it. Then I installed TWRP to get a backup of the system but I guess that during that process I managed to wipe the whole system. Now I'm stuck in a bootloop that only shows the POCO logo and nothing else. Pressing VOL+/VOL- and Power button don't do anything at all and I think I've run out of options. I was wondering if there is anything I could do to install OS or TWRP back because for some reason it doesnt want to go into neither Fastboot or TWRP(I think I didnt install it properly because I had to use console commands almost everytime I wanted to launch it). Title sums up the problem.
Try to flash boot.img file of you stock ROM. It can help to exit bootloop. Or if this does not work i recommend you to reflash full rom once again from MI FLASH TOOL.
Hope it will help you.
NOAKNAVAS said:
Try to flash boot.img file of you stock ROM. It can help to exit bootloop. Or if this does not work i recommend you to reflash full rom once again from MI FLASH TOOL.
Hope it will help you.
Click to expand...
Click to collapse
Doesn't the phone have to be on fastboot to flash? I'm stuck in the POCO logo by the way. I haven't tried the "reflash full rom", is there anything else I might need besides the ROM and MI FLASH TOOL?