Database Develop

Help rooting Huawei P7 L10 B839 Lollipop 5.1.1 & UNLOCKING BOOTLOADER

Hello guys, I need help with this and I know a lot of people need info about this too, I want to root my Huawei P7 L10 with Android Lollipop 5.1.1 (P7-L10C900B839). I already tried with ROOT GENIUS and it didn't work, I got a message something like right now there is not root for my phone, and another saying that the phone disconnected from the pc WHICH IS NOT TRUE. So, could anyone help me please? Also, I don't want to unlock the bootloader, I may be wrong so you should correct me if I am but I think if I just want to root I don't necessarily have to unlock the bootloader, I just want the root for a few minimal changes (to change the font since EMUI 3.1 doesn't let us do that and apply the new emojis to my phone changing a system file). So yeah, could anyone help me, I already checked the other threads and they only suggested a procedure involving unlocking the bootloader...so HEEEEEEEEEEEEEELP PLEASE :crying:

there is no other way than unlocking bootloader if you want to root your phone..
for b839 you need to replace the stock recovery with the newest TWRP custom recovery..
through this you can flash the super su (should be available as a zip-file)..
after that you have to delete the set_immutable.list by installing busybox and through commands by a terminal emulator..
when you have done these steps you should have successfully rooted your phone..
if you have read the threads entirely you should have read these information as well - because this had been adviced many times since the b805 beta..
for replacing stock boot or recovery it is always neccessary to unlock the bootloader, otherwise you will always get a "failed" if you try to flash a custom one..
Gesendet von meinem HUAWEI P7-L10 B852

Ok thank you for clearing this to me, I wasn't sure so I asked. Now I wish you could tell us step by step how to unlock the bootloader of the B839, I read the [GUIDE][HOW-TO] Unlock Bootloader Huawei Ascend P7-L10 thread but they talk about the B121, B126, nothing about B839
I used to root my phones long time a go, so I have a little experience, but I have never unlocked a bootloader or rooted a huawei, this is my first huawei. Could you please help me with this? I Know there are people looking info about B839 too. Thank you.

HowlingSoul said:
Ok thank you for clearing this to me, I wasn't sure so I asked. Now I wish you could tell us step by step how to unlock the bootloader of the B839, I read the [GUIDE][HOW-TO] Unlock Bootloader Huawei Ascend P7-L10 thread but they talk about the B121, B126, nothing about B839
I used to root my phones long time a go, so I have a little experience, but I have never unlocked a bootloader or rooted a huawei, this is my first huawei. Could you please help me with this? I Know there are people looking info about B839 too. Thank you.
Click to expand...
Click to collapse
It's really simple, once you've unlocked your bootloader and updated to the latest stock firmware, just flash a custom recovery using flashtool (flashtool flash recovery RECOVERYNAME.img) and flash supersu zip in recovery.
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
http://www.mediafire.com/download/wl1gua834qefkvy/recovery_cwm_emui3.0_B609.img

Ok, but I don't know how to unlock the bootloader part sorry, as I said I have never done that. But the other things you said and the other person above about the flashing a custom recovery and flashing super su zip I think I don't have any more questions, although I don't know why in the second link you sent it says emui3.0 and B609, it will work with my lollipop 5.1.1 emui 3.1 and B839? because downgrading is not an option

HowlingSoul said:
Ok, but I don't know how to unlock the bootloader part sorry, as I said I have never done that. But the other things you said and the other person above about the flashing a custom recovery and flashing super su zip I think I don't have any more questions, although I don't know why in the second link you sent it says emui3.0 and B609, it will work with my lollipop 5.1.1 emui 3.1 and B839? because downgrading is not an option
Click to expand...
Click to collapse
Hi everyone!
I just purchased a P7-L12 and I just upgraded to Lollipop 5.1.1. I'm very sure this update locked bootloader. Previous versions have unlocked bootloader.
Does anybody know the steps to unlocked this?

on huawei website should be a button for unlocking bootloader..
it is a small one..
just so the steps the website asks to do and you should get clear instructions how to unlock your bootloader..
Gesendet von meinem HUAWEI P7-L10 B852

dude this should help you..
download adb or fastboot programs on you computer then go to the same file were you installed them then press Control button at keyboard then right click then you get option to open with fastboot
then once you get the cmd screen follow the instruction in the picture

abuelzoz2005 said:
dude this should help you..
download adb or fastboot programs on you computer then go to the same file were you installed them then press Control button at keyboard then right click then you get option to open with fastboot
then once you get the cmd screen follow the instruction in the picture
Click to expand...
Click to collapse
I think this is the right help! But the picture is uncompleted. Could you send the thread link of this picture?

sorry but I have as a screen shot...but I think it's clear...

abuelzoz2005 said:
sorry but I have as a screen shot...but I think it's clear...
Click to expand...
Click to collapse
Here it is: http://forum.xda-developers.com/ascend-p7/general/guide-unlock-bootloader-p7-l10-oem-t3062851
I just tried the dialer code thing and I got this:
FAILED (remote: data parse fail)

boss follow these procedures
1- Download adb or fastboot programs and save them to c: partition on your computer.
2- go to the file were you download the programs.
3- Press ctrl button at keyboard and right click at the mouse at same time.
4- You one option I don't remember exactly but it says something like open file here with adb.
5- You get the cmd screen for adb then you should type the following:
a- adb reboot bootloader.
b- fastboot oem unlock UNLOCK CODE.

It's not going to work, you need to request huawei for unlocking code

yaaa this is what I told him he needs to have unlock code that's why I capitalized this word.

Just go on huawei website and find about bootloader unlocking code. Its very simple

tommykole96 said:
Just go on huawei website and find about bootloader unlocking code. Its very simple
Click to expand...
Click to collapse
This is the link to unlock bootloader:
http://emui.huawei.com/en/plugin.php?id=hwdownload&mod=list
There is a button Unlock Bootloader. Fill the form and then the unlock code will be generated!

I always get "server is busy" or something like that....

Try to login with your facebook-account. That worked fine for me

bluescoobie said:
I always get "server is busy" or something like that....
Click to expand...
Click to collapse
Hi!
Which link are you trying with?

I follow the link from your post....
Reyse said:
Hi!
Which link are you trying with?
Click to expand...
Click to collapse

[Help] Failed to root and cant boot but still can enter recovery mode.

Hello, Im really2 noob about these and just tried to root last night and failed, now my phone cant boot, but it still can enter recovery mode which is (CWM - based Recovery v6.0.4.7 so I have discover so many step and now become confused which one should I do, plus all the new terms I never heard before like flash rom, image, bootloader...
What Ive done since last night (after the problem occur) I download a ROM (maybe) which is http://forum.xda-developers.com/z3-compact/development/d5803-23-2-1-62-slim-t3127115
So I put it in sd and install the zip file through recovery mode I mentioned and reboot but still nothing happen..and also I do the same way to super SU.zip file, install it from recovery and yeah still like before cant boot, stuck at logo, just can enter recovery mode.
Hope any of you can help.
Sincerely, Noob.

Download stock firmware using XperiFirm and then flash that firmware with Flashtool,there is over 1000 guides on how to do that,and as well this will completely wipe your phone so if you didn't backup basically all of your data is gone.
Then try to root again,put recovery and flash that ROM.

Ax3_M3n said:
Hope any of you can help.
Click to expand...
Click to collapse
I would stop trying to flash random roms while the phone still works and concentrate on following a proper guide on how to root and back up your TA partition.
You will need flashtool. Once installed look inside for a folder called Drivers, run the exe in that folder, this will give you flashtool drivers. If you are on windows 10 then installing these drivers is a bit complicated. You will also need Z3 compact drivers.
Follow the instruction on the above thread to downgrade your firmware to 23.0.A.2.93 or older. You will then be able to root very easily, then recovery and supersu are a couple of clicks away.
Once you have working recovery then you can choose a good MM build and flash that
Check that the rom you are trying to flash supports locked bootloader [STOCK] and if you are tempted to unlock your bootloader, then just take a minute to read through the Q&A thread bellow your question looking at all the DRM questions and why you'll never get your camera working properly again.

Didgesteve said:
I would stop trying to flash random roms while the phone still works and concentrate on following a proper guide on how to root and back up your TA partition.
You will need flashtool. Once installed look inside for a folder called Drivers, run the exe in that folder, this will give you flashtool drivers. If you are on windows 10 then installing these drivers is a bit complicated. You will also need Z3 compact drivers.
Follow the instruction on the above thread to downgrade your firmware to 23.0.A.2.93 or older. You will then be able to root very easily, then recovery and supersu are a couple of clicks away.
Once you have working recovery then you can choose a good MM build and flash that
Check that the rom you are trying to flash supports locked bootloader [STOCK] and if you are tempted to unlock your bootloader, then just take a minute to read through the Q&A thread bellow your question looking at all the DRM questions and why you'll never get your camera working properly again.
Click to expand...
Click to collapse
I still can follow all the step that you gave me even I have unlock the bootloader...But wait, correct me If I'm wrong, when we gonna unlock the bootloader, in the process, we will get email and some code and after enter the code and some other step it unlock it right? because Im quite unsure that I have unlock it or not...

Ax3_M3n said:
I still can follow all the step that you gave me even I have unlock the bootloader...But wait, correct me If I'm wrong, when we gonna unlock the bootloader, in the process, we will get email and some code and after enter the code and some other step it unlock it right? because Im quite unsure that I have unlock it or not...
Click to expand...
Click to collapse
Don't unlock your bootloader
Follow the instructions, you can have MM rom, rooted with bootloader locked. Your camera will still work !!

Didgesteve said:
Don't unlock your bootloader
Follow the instructions, you can have MM rom, rooted with bootloader locked. Your camera will still work !!
Click to expand...
Click to collapse
I think I have unlocked the bootloader :crying: I have receive the email and unlock it thru the sony web...and from that time I knew my warranty was void already and I dont care since my warranty left about 1 month.

Ax3_M3n said:
I think I have unlocked the bootloader :crying: I have receive the email and unlock it thru the sony web...and from that time I knew my warranty was void already and I dont care since my warranty left about 1 month.
Click to expand...
Click to collapse
Hopefully you made a backup of your TA partition?

Didgesteve said:
Hopefully you made a backup of your TA partition?
Click to expand...
Click to collapse
I did not...

Didgesteve said:
Don't unlock your bootloader
Follow the instructions, you can have MM rom, rooted with bootloader locked. Your camera will still work !!
Click to expand...
Click to collapse
I have downloaded the FTF file but my Flashtool doesnt detect it even I have browse to te right location of the FTF file..Help..

Ax3_M3n said:
I have downloaded the FTF file but my Flashtool doesnt detect it even I have browse to te right location of the FTF file..Help..
Click to expand...
Click to collapse
you need to place the firmware in c:\Users\%username%\.flashtool\firmwares
Then start the flashtool and it will show up

Huawei P9

Hello, I'm new member and i just came here for help because i don't know what to do i searched a lot. So i need recovery.img for huawei p9 EVA-L19C432B383 model number EVA-L19 android version 7.0 and EMUI 5.0 thanks for helping AND I need help with one more thing it writes that my phone is rooted but it's not when i check in root checker when i boot it then writes your phone unlocked and not trusted something like that ,but there's no root so how do i remove it or just fully root it?

It's not that your phone is rooted, that message is to let you know the bootloader is unlocked

d_mouse81 said:
It's not that your phone is rooted, that message is to let you know the bootloader is unlocked
Click to expand...
Click to collapse
How to fully root then it? And i need huawei p9 recovery.img too because i don't want to be with teamwin recovery..

For L19 I'm not sure where exactly to get a stock recovey image, but if you look around here you should be able to find one easy enough. Once you have one, boot into the bootloader, flash it, and then re-lock the bootloader

d_mouse81 said:
For L19 I'm not sure where exactly to get a stock recovey image, but if you look around here you should be able to find one easy enough. Once you have one, boot into the bootloader, flash it, and then re-lock the bootloader
Click to expand...
Click to collapse
Well as i said i was searching so long but i couldn't find one from yesterday so yea that's why i written here that someone could find it for me because i only see p8 or other recoveries that i don't know properly

[Solved] Mate 10 FRP Locked, Phone Unlocked

so I was trying to update to EMUI 9 using Beta Flashy and I forgot to reflash stock recovery after flashing root via TWRP to get Flashy to work, so after the update, it couldn't reset, and when I checked bootloader, FRP was locked and now its stuck in bootloop. can anyone provide me with a method to fixing this issue without requiring me to pay the absurd amount that FunkyHuawei and DC Unlocker charge for restoring?
thank you
edit: solution here

Try Dload method and go back to EMUI8

majidamiri15300 said:
So I was trying to update to EMUI 9 using Beta Flashy and I forgot to reflash stock recovery after flashing root via TWRP to get Flashy to work, so after the update, it couldn't reset, and when I checked bootloader, FRP was locked and now its stuck in bootloop. I read this guide https://forum.xda-developers.com/showpost.php?p=73556776&postcount=24 saying that restoring the oeminfo partition should get it to work (don't worry, I still have my bootloader unlock code), but I can't find any images for the Mate 10 (ALP-L29).
Can anyone provide me with one? If not, can you provide me with a method to fixing this issue without requiring me to pay the absurd amount that FunkyHuawei and DC Unlocker charge for restoring?
Thank you
Click to expand...
Click to collapse
Have you tried factory reset from stock recovery?
Flashing someone elses oeminfo will not help you. All it will do is lock bootloader and change your unlock code. (that thread is for Mate 9 on Nougat where oeminfo can be flashed without breaking anything. On Oreo and higher it uses oeminfo to calculate unlock code. But it also uses the imei that's embedded in oeminfo to calculate it. If you flash someone elses oeminfo your imei in oeminfo will not be the same and unlock code will change)
You most likely didn't do anything wrong. Updating stock firmware will replace your recovery with stock recovery. If it got that far in installation that is?
FH should work but it cost a lot. DC does not work since June so don't bother with it.
Else you can try service firmware from androidhost.ru.

ante0 said:
Have you tried factory reset from stock recovery?
Flashing someone elses oeminfo will not help you. All it will do is lock bootloader and change your unlock code. (that thread is for Mate 9 on Nougat where oeminfo can be flashed without breaking anything. On Oreo and higher it uses oeminfo to calculate unlock code. But it also uses the imei that's embedded in oeminfo to calculate it. If you flash someone elses oeminfo your imei in oeminfo will not be the same and unlock code will change)
You most likely didn't do anything wrong. Updating stock firmware will replace your recovery with stock recovery. If it got that far in installation that is?
FH should work but it cost a lot. DC does not work since June so don't bother with it.
Else you can try service firmware from androidhost.ru.
Click to expand...
Click to collapse
It supposedly went fine, but its still as is so. im downloading the Oreo update i was on, hopefully it works. of course the download speed isnt of much help

ante0 said:
Have you tried factory reset from stock recovery?
Flashing someone elses oeminfo will not help you. All it will do is lock bootloader and change your unlock code. (that thread is for Mate 9 on Nougat where oeminfo can be flashed without breaking anything. On Oreo and higher it uses oeminfo to calculate unlock code. But it also uses the imei that's embedded in oeminfo to calculate it. If you flash someone elses oeminfo your imei in oeminfo will not be the same and unlock code will change)
You most likely didn't do anything wrong. Updating stock firmware will replace your recovery with stock recovery. If it got that far in installation that is?
FH should work but it cost a lot. DC does not work since June so don't bother with it.
Else you can try service firmware from androidhost.ru.
Click to expand...
Click to collapse
i tried but got an "Software install failed" error.

majidamiri15300 said:
i tried but got an "Software install failed" error.
Click to expand...
Click to collapse
Which build and cust are you trying to install?

ante0 said:
Which build and cust are you trying to install?
Click to expand...
Click to collapse
128, C185

majidamiri15300 said:
128, C185
Click to expand...
Click to collapse
Wait, you were on B128?!
That's from December 2017/January 2018. And that's the reason why it won't downgrade. It has old bootloader, and you are now on new bootloader. (Since Pie has new bootloader and it flashed).
Try a more recent build, like B139 or B140
You can also try downloading from androidhost.ru using JDownloader, it seem to ignore the limit.

ante0 said:
Wait, you were on B128?!
That's from December 2017/January 2018. And that's the reason why it won't downgrade. It has old bootloader, and you are now on new bootloader. (Since Pie has new bootloader and it flashed).
Try a more recent build, like B139 or B140
You can also try downloading from androidhost.ru using JDownloader, it seem to ignore the limit.
Click to expand...
Click to collapse
does it matter though? because i cant even flash Pie. it's like its not accepting anything.

majidamiri15300 said:
does it matter though? because i cant even flash Pie. it's like its not accepting anything.
Click to expand...
Click to collapse
But it did update before bootlooping, no?

ante0 said:
But it did update before bootlooping, no?
Click to expand...
Click to collapse
i think so, yes. im downloading and trying anyway cuz what do i have to lose here.
edit: B135 didn't work, B139 still downloading...

majidamiri15300 said:
i think so, yes. im downloading and trying anyway cuz what do i have to lose here
Click to expand...
Click to collapse
It's just that B128 has old bootloader, and Pie (Including Oreo firmware from June and forward) has new bootloader. You can not downgrade from new bootloader to old bootloader.
So that's most likely why it fails to flash B128.
And you would only be able to update Pie using NoCheck recovery/TWRP, which is impossible to flash as you are FRP locked.

ante0 said:
It's just that B128 has old bootloader, and Pie (Including Oreo firmware from June and forward) has new bootloader. You can not downgrade from new bootloader to old bootloader.
So that's most likely why it fails to flash B128.
And you would only be able to update Pie using NoCheck recovery/TWRP, which is impossible to flash as you are FRP locked.
Click to expand...
Click to collapse
yeah i get that. ugh why does Huawei have to make everything so hard?

majidamiri15300 said:
i think so, yes. im downloading and trying anyway cuz what do i have to lose here.
edit: B135 didn't work, B139 still downloading...
Click to expand...
Click to collapse
majidamiri15300 said:
yeah i get that. ugh why does Huawei have to make everything so hard?
Click to expand...
Click to collapse
B135 should be able to install. It's new bootloader.
Check the instruction pdf that's included in the firmware, it will show you the directory path to use. And if you need to use microsd or USB OTG to SD adapter or something.

ante0 said:
B135 should be able to install. It's new bootloader.
Check the instruction pdf that's included in the firmware, it will show you the directory path to use. And if you need to use microsd or USB OTG to SD adapter or something.
Click to expand...
Click to collapse
i tried B139 and it didnt work. what the hell is going on???
edit: nevermind, nevermind, im just a giant idiot. ive been extracting the UPDATE.APP and using that instead of the full image. its flashing now.

majidamiri15300 said:
i tried B139 and it didnt work. what the hell is going on???
edit: nevermind, nevermind, im just a giant idiot. ive been extracting the UPDATE.APP and using that instead of the full image. its flashing now.
Click to expand...
Click to collapse
Hi. Have you solved the problem? I'm stuck on Android pie beta too and I can't rollback to Oreo. I'm frp locked too.

Todesdoktor said:
Hi. Have you solved the problem? I'm stuck on Android pie beta too and I can't rollback to Oreo. I'm frp locked too.
Click to expand...
Click to collapse
Which model and cust are you on? (ex. BLA-L29 C432)

Pretoriano80 said:
Which model and cust are you on? (ex. BLA-L29 C432)
Click to expand...
Click to collapse
ALP-L29 C636 But my build says ALP-LGRP2-OVS

Todesdoktor said:
Hi. Have you solved the problem? I'm stuck on Android pie beta too and I can't rollback to Oreo. I'm frp locked too.
Click to expand...
Click to collapse
yeah i did, it was relatively easy. just go to https://androidhost.ru, download the version for your phone, and when you unzip, you'll find a folder with instructions on how to flash. easy process, although keep in mind, this process will relock your bootloader (if you already unlocked it).
if you did unlock and it relocked, firstly, check your email if you still have the unlock code buried somewhere in your deleted emails, and if not, then check out this guide, should help you find your unlock code. it worked for me, and only cost $5 or so.

majidamiri15300 said:
yeah i did, it was relatively easy. just go to https://androidhost.ru, download the version for your phone, and when you unzip, you'll find a folder with instructions on how to flash. easy process, although keep in mind, this process will relock your bootloader (if you already unlocked it).
if you did unlock and it relocked, firstly, check your email if you still have the unlock code buried somewhere in your deleted emails, and if not, then check out this guide, should help you find your unlock code. it worked for me, and only cost $5 or so.
Click to expand...
Click to collapse
Thank you. So, for confirm, this works on frp locked? And yes, I'm unlocked and I have my code and my OEM file backup.

Relock bootloader VOG-L29

Hello
I purchased the device of the title already unlocked and would like to return it to stock rom and lock the bootloader but I don't have the unlock code. I followed a guide found here using an otg cable and a pendrive to return to stock in hopes that it would also lock my bootloader but it did not. The procedure completed successfully twice, 1st going from .178 to .185 and second attempt from .185 back to .178. Every time the phone was factory reset but the bootloader remained unlocked. Any ideas on how to relock the bootloader on this thing without having the unlock code?

tassos_chry said:
Hello
I purchased the device of the title already unlocked and would like to return it to stock rom and lock the bootloader but I don't have the unlock code. I followed a guide found here using an otg cable and a pendrive to return to stock in hopes that it would also lock my bootloader but it did not. The procedure completed successfully twice, 1st going from .178 to .185 and second attempt from .185 back to .178. Every time the phone was factory reset but the bootloader remained unlocked. Any ideas on how to relock the bootloader on this thing without having the unlock code?
Click to expand...
Click to collapse
That's very strange, service firmware always lock bootloader but in your case it can't. Anyway I have two suggestions for you first go to developer option and uncheck OEM Unlock option then try dload.
Second is try this method Thread Link Click here. Third and last use erecovery for stock firmware restore.
Hope this will help you.
Thanks,
goldybewon

goldybewon said:
That's very strange, service firmware always lock bootloader but in your case it can't. Anyway I have two suggestions for you first go to developer option and uncheck OEM Unlock option then try dload.
Second is try this method Thread Link Click here. Third and last use erecovery for stock firmware restore.
Hope this will help you.
Thanks,
goldybewon
Click to expand...
Click to collapse
is a bad idea uncheck "oem unlock" if you have problem on a flash and need an open bootloader for something simply you are fu..ed

goldybewon said:
That's very strange, service firmware always lock bootloader but in your case it can't. Anyway I have two suggestions for you first go to developer option and uncheck OEM Unlock option then try dload.
Second is try this method Thread Link Click here. Third and last use erecovery for stock firmware restore.
Hope this will help you.
Thanks,
goldybewon
Click to expand...
Click to collapse
Hello and thanks for your answer. How do you suggest to follow the second method as I am already on emui 9.1?

maurydes said:
is a bad idea uncheck "oem unlock" if you have problem on a flash and need an open bootloader for something simply you are fu..ed
Click to expand...
Click to collapse
My lord he doesn't know BL Code and desperately trying to lock it.:laugh:
tassos_chry said:
Hello and thanks for your answer. How do you suggest to follow the second method as I am already on emui 9.1?
Click to expand...
Click to collapse
Hi did you tried above methods? What's the result? If not try TWRP tool which I've suggested you.
Another guide for you follow this link CLICK HERE.
I personally advise don't lock bootloader, if you don't know code ask your seller for it.
Thanks,
goldybewon

Hi. I'm in the same situation. I have a Huawei P30 Pro that came with an unlocked bootloader. The yellow message at startup is really disturbing. I would like to relork the bootloader but in vain. The fastboot oem relock command does not work. I flashed the firmware in ota and also by erecovery but nothing works. Recently I noticed on the back of the phone the inscription NOT FOR SALE. I don't know if it has anything to do with it or not.
Translated with www.DeepL.com/Translator (free version)

Hi guys,
Sorry for this stupid question but how do you check your bootloader status on this device?

fastboot oem relock command need oem bootloader code.
you can try with full ota upgrade via OTG via Dload metod. long press the volume up key + volume down key + power button.
Choose the right firmware ,same country of your PHone (example europe C432).
But you are very lucky to have an P30 pro unlocked...don't relock.....
look here
https://androidhost.ru/search.html
torytory said:
Hi. I'm in the same situation. I have a Huawei P30 Pro that came with an unlocked bootloader. The yellow message at startup is really disturbing. I would like to relork the bootloader but in vain. The fastboot oem relock command does not work. I flashed the firmware in ota and also by erecovery but nothing works. Recently I noticed on the back of the phone the inscription NOT FOR SALE. I don't know if it has anything to do with it or not.
Translated with www.DeepL.com/Translator (free version)
Click to expand...
Click to collapse

tassos_chry said:
Hello
I purchased the device of the title already unlocked and would like to return it to stock rom and lock the bootloader but I don't have the unlock code. I followed a guide found here using an otg cable and a pendrive to return to stock in hopes that it would also lock my bootloader but it did not. The procedure completed successfully twice, 1st going from .178 to .185 and second attempt from .185 back to .178. Every time the phone was factory reset but the bootloader remained unlocked. Any ideas on how to relock the bootloader on this thing without having the unlock code?
Click to expand...
Click to collapse
lets exchange phones i'll give you a locked one gimme your unlocked one friend

so, how can you do relock if you do not have the code? I have the same problem...