I no longer support Swell due to reasons I'd rather not point out.
Thanks for understanding
https://www.dropbox.com/sh/hqfxtnqk9ilnztt/AACooosVtPrZt42LVG8Y29hXa?dl=0
GZR kernel auditor is required for full use. I've attached an APK for those not running Tipsy, Validus, or Tesla
Guys, recommendations make this kernel what it is. I'm always open to suggestions and I'm always open to helping others with their projects. Just make a suggestion and I'll consider it
****ing Annoying Questions (@fusionjack LOL)
1. Does this work on OOS?
No
2. Will I implement such and such?
I'll look into it
3. Why isn't this working anymore?
Because I can't test EVERYTHING. I'll get on it ASAP
4. Why is my phone overclocked?
Read the OP
5. Apps are crashing
Read the OP and then say something
Working on DU :good:
good to see a new kernel
Well done.
Great job
Great work man. Works fine here on AOKP.
Awesome !
How many kernels are you going to build ?
Adesh15 said:
Awesome !
How many kernels are you going to build ?
Click to expand...
Click to collapse
One more lol. Working on a 3.10 based one right now
RJDTWO said:
One more lol. Working on a 3.10 based one right now
Click to expand...
Click to collapse
Consider building a ROM too
yeah was hoping, that lord boeffla having anykernel implemented would push ur project further
will report back. but so far, thanks for ur efforts! appreciated
Gesendet von meinem ONE E1003 mit Tapatalk
---------- Post added at 06:19 AM ---------- Previous post was at 05:28 AM ----------
Okay I just dirty flashed this over blu_spark r162 and it booted into aicp without any issues (still wondering why it's "anykernel" instead of "anyOS/anyROM").
Whatsoever I just went through the settings and personally lack few points:
- tcp algorithm: westwood(+)
- i/o-schedulers: sio, fiops+
- cpu gov: personally i'm actually fine with interactive, tho wondering if u could add yankactive and zzmove
- also will there be lower min freq policy available?
Please don't take this as demanding features! Just think about it
A question in addition: Did I get that right, that max freq during boot is set to 2880MHz? If so I really appreciate that. During normal use I have max freq capped to 1958MHz but on boot I think OC is a very good idea
EDIT: anyway will run this for now and report back. especially excited about battery life
EDIT2: is there usb fast charge? cause i see no setting in kernel auditor.
@RJDTWO , Had few FCs on instagram after longer use. Device froze twice, once it recovered after "system ui not resonding", another time, device rebooted and was stuck in boot loop. From then onwards, everytime I try to boot, it gets stuck in oneplus logo.
Nice feature list tho
saurabh40629 said:
@RJDTWO , Had few FCs on instagram after longer use. Device froze twice, once it recovered after "system ui not resonding", another time, device rebooted and was stuck in boot loop. From then onwards, everytime I try to boot, it gets stuck in oneplus logo.
Click to expand...
Click to collapse
Which rom are u on? also did u run a custom kernel before and dirty flashed this one?
tet-bundy said:
Which rom are u on? also did u run a custom kernel before and dirty flashed this one?
Click to expand...
Click to collapse
AOKP. Nope, i m not a noob mate. I would have grabbed a log but since device didn't even boot, i couldn't.
saurabh40629 said:
AOKP. Nope, i m not a noob mate. I would have grabbed a log but since device didn't even boot, i couldn't.
Click to expand...
Click to collapse
yeah actually didn't think you were. was more like at least the rom ur running might be valuable info to the dev, as its obvious, ure unable to grab logs. and the latter was out of interest, as dirty flash worked just fine for me
tet-bundy said:
yeah actually didn't think you were. was more like at least the rom ur running might be valuable info to the dev, as its obvious, ure unable to grab logs. and the latter was out of interest, as dirty flash worked just fine for me
Click to expand...
Click to collapse
If same kernel, dirty flash works otherwise might cause issues. I tried to avoid all kind of conflicts, only root. It might be conflict with ROM or a bug. These are the issues which are hard to debug and reproduce. I reported in so that probably there is something OP can identify.
saurabh40629 said:
If same kernel, dirty flash works otherwise might cause issues. I tried to avoid all kind of conflicts, only root. It might be conflict with ROM or a bug. These are the issues which are hard to debug and reproduce. I reported in so that probably there is something OP can identify.
Click to expand...
Click to collapse
yah still remains, i guess it's even harder to debug a "didn't boot" issue if one doesn't know what it was that did not boot...
however wasn't meant offensive.
saurabh40629 said:
@RJDTWO , Had few FCs on instagram after longer use. Device froze twice, once it recovered after "system ui not resonding", another time, device rebooted and was stuck in boot loop. From then onwards, everytime I try to boot, it gets stuck in oneplus logo.
Click to expand...
Click to collapse
Did you down clock the OC as mentioned in the OP? That would do it
Related
Hi,
so I'm currently running the Lunar-Kernel because I want to have more clockspeed-cteps, lower minimum clockspeed and voltage-controls so that I can undervolt the CPU slightly which saves a lot of battery.
I just realized that it has this stupid Logo2Wake and Logo2Menu-Feature that I don't need and now I want to know how I can disable those or if there is any kernel that supports those voltage and clockspeed-settings but doesn't have these Logo-Features.
Thanks for your time and help in advance!
Stupid?!
HeavyHDx said:
Hi,
so I'm currently running the Lunar-Kernel because I want to have more clockspeed-cteps, lower minimum clockspeed and voltage-controls so that I can undervolt the CPU slightly which saves a lot of battery.
I just realized that it has this stupid Logo2Wake and Logo2Menu-Feature that I don't need and now I want to know how I can disable those or if there is any kernel that supports those voltage and clockspeed-settings but doesn't have these Logo-Features.
Thanks for your time and help in advance!
Click to expand...
Click to collapse
Ok so because you don't need them, doesn't mean these are stupid features. Devs are working hard to bring those features users asked for. What is stupid imo is someone not searching the forum for something evident. maybe you should read those threads
Not a single kernel there that does what I describe above, except this one:
http://forum.xda-developers.com/showthread.php?t=2301543
But the download isn't available anymore.
HeavyHDx said:
Not a single kernel there that does what I describe above, except this one:
http://forum.xda-developers.com/showthread.php?t=2301543
But the download isn't available anymore.
Click to expand...
Click to collapse
You ca n undervolt and overclock/underclock with elementalx
you can chose what features you want when installing in aroma so you won't be stuck with logo2wake or logo2menu if you don't want them
Yes but it doesn't work with CM11
HeavyHDx said:
Yes but it doesn't work with CM11
Click to expand...
Click to collapse
maybe you should have mentioned this in your op? :laugh:
TeaMSeven kernel for CM11. Why would you not want logo to menu? It is so handy but even if it was there you wouldn't have to ever touch it. Anyway, aroma lets you choose whether to install or not. Btw, my first post after I got my One was asking for a kernel for CM that DID have that feature and I got my a** busted!!
Sent from my GT-p511x
This kernel doesn't have AROMA-Options for all the features :/
I don't need the features and at first I didn't know that they were there, was really confused when the phone randomly woke up or a random menu popped up.
Anyone? :/
HeavyHDx said:
Anyone? :/
Click to expand...
Click to collapse
If you are looking for a kernel that suites your needs maybe you should look into building one yourself.
HeavyHDx said:
This kernel doesn't have AROMA-Options for all the features :/
I don't need the features and at first I didn't know that they were there, was really confused when the phone randomly woke up or a random menu popped up.
Click to expand...
Click to collapse
I installed and selected those options so I'm sure you could unselect them!
Sent from my GT-p511x
Okay I'll try it real quick
This kernel is for users that have flashed the KitKat firmware but decided to return to a 4.1.2 based rom.
To clarify, This is for 4.1.2 Touchwiz based roms only.
Reason for new kernel:
The new KitKat bootloader does not allow offline charging to work properly with the older 4.1.2 kernels. This kernel fixes that issue and offline charging will work as it did on full stock 4.1.2 firmware.
What kernel is this?
This is @ketut.kumajaya's blackhawk 2.1 kernel (compiled by me) modified to work with the new KitKat bootloader. All credit is given to him for the original kernel and the new fix. I am posting this per his wishes.
Other Features:
See the original blackhawk thread for other features of this kernel.
Source:
See original blackhawk thread .
Modifications: See THIS post.
Installation:
Flashed attached zip in your custom recovery.
Reserved
Amazing Work!
Thanks gr8nole for this kernel! You have done so much for us tab 3 users. Keep up the great work! I wish you the best!
Thank you very much for the great work you did here. I appreciate. I'll flash it hence
gr8nole said:
Reserved
Click to expand...
Click to collapse
I have flashed it. But I discovered that my tab is now very slow. Unnecessarily sluggish. I don't know whether it's the kernel or what
odifek said:
I have flashed it. But I discovered that my tab is now very slow. Unnecessarily sluggish. I don't know whether it's the kernel or what
Click to expand...
Click to collapse
It is the same same kernel as ketut's Blackhawk with minimal changes, so it should perform just as well as that one (which always performed great).
Sent from my SCH-I605
OK. Or maybe I should reflash the ROM? Please bear with my ignorance. If there's any other way to make it faster, I'll appreciate that.
gr8nole said:
It is the same same kernel as ketut's Blackhawk with minimal changes, so it should perform just as well as that one (which always performed great).
Sent from my SCH-I605
Click to expand...
Click to collapse
Please there is something I discovered now. Whenever I open maps, after some time the tablet would freeze until I do hard reset.
I also discovered that much RAM is being used, seems the system doesn't manage RAM usage well again by closing some apps when RAM is getting used up. I think this is the reason for the tablet freezing. Even after factory restore, it continued that way. All these after installing the blackhawk kernel.
Can the kernel be replaced with stock by flashing through Odin? Or if there is any other remedy, I'll appreciate it much. Thanks
odifek said:
Please there is something I discovered now. Whenever I open maps, after some time the tablet would freeze until I do hard reset.
I also discovered that much RAM is being used, seems the system doesn't manage RAM usage well again by closing some apps when RAM is getting used up. I think this is the reason for the tablet freezing. Even after factory restore, it continued that way. All these after installing the blackhawk kernel.
Can the kernel be replaced with stock by flashing through Odin? Or if there is any other remedy, I'll appreciate it much. Thanks
Click to expand...
Click to collapse
Just reflash your rom to get your previous kernel back.
Sent from my SCH-I605
OK. Thanks
Sorry I'm new to the Tab 3, as I don't own one but my brother does, but how do I get the KK Bootloader??
awesome work bro, can you make this build for T211 :fingers-crossed: ?
hehk1234 said:
awesome work bro, can you make this build for T211 :fingers-crossed: ?
Click to expand...
Click to collapse
+1
Sent from my GT-I9305
Nick_73 said:
Sorry I'm new to the Tab 3, as I don't own one but my brother does, but how do I get the KK Bootloader??
Click to expand...
Click to collapse
Use odin to install the latest kitkat fireware (on sammobile) for your model number
odifek said:
Please there is something I discovered now. Whenever I open maps, after some time the tablet would freeze until I do hard reset.
I also discovered that much RAM is being used, seems the system doesn't manage RAM usage well again by closing some apps when RAM is getting used up. I think this is the reason for the tablet freezing. Even after factory restore, it continued that way. All these after installing the blackhawk kernel.
Can the kernel be replaced with stock by flashing through Odin? Or if there is any other remedy, I'll appreciate it much. Thanks
Click to expand...
Click to collapse
It's a bug in stock firmware that's why I have switched to 4.4.2
Q&A for [KERNEL][AOSP 4.4.4|CAF][UNIFIED ghost | moto_msm8960dt][TDHK 10/05/2014]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
So this won't work with vzw xt1060 stock rom unlocked BL?
Nope..its made for aosp Roms based off of CM
Sent from my Nexus 7 using XDA Free mobile app
When install de kernel, aptoide doesn't work anymore... I try to open and then close alone. Sorry for my english. I use de liquid ROM and work fine with default kernel, but i flash this and doesn't work anymore.
AnshRosenberg said:
When install de kernel, aptoide doesn't work anymore... I try to open and then close alone. Sorry for my english. I use de liquid ROM and work fine with default kernel, but i flash this and doesn't work anymore.
Click to expand...
Click to collapse
Did you get this fixed up. If not I'll get you set. A great many people are using the kernel across a lot of ROMS so likely it'll work.
tdhite said:
Did you get this fixed up. If not I'll get you set. A great many people are using the kernel across a lot of ROMS so likely it'll work.
Click to expand...
Click to collapse
I had to install a nandroid of the ROM I was using, to get back to the old kernel . yet still not work for me the Aptoide when you used to and is giving me error in the camera application and stops , so I will try to reinstall everything from 0 and see if it works with the kernel stock and try again with this kernel and see if it stops me working again , if you work then it is not kernel problem , but if i happens again I will have to return to report the error or maybe it's something else that I am installed causing this conflict but I doubt it because I install very basic things ...
AnshRosenberg said:
I had to install a nandroid of the ROM I was using, to get back to the old kernel . yet still not work for me the Aptoide when you used to and is giving me error in the camera application and stops , so I will try to reinstall everything from 0 and see if it works with the kernel stock and try again with this kernel and see if it stops me working again , if you work then it is not kernel problem , but if i happens again I will have to return to report the error or maybe it's something else that I am installed causing this conflict but I doubt it because I install very basic things ...
Click to expand...
Click to collapse
This kernel will only work with ROMS based on AOSP. If Aptoide is a stock rom, or anything other than AOSP, forget the effort. It will not work.
So this kernel is compatible with CM12 nightlies coming out at the moment, or am i wrong?
Cassini-Huygens said:
So this kernel is compatible with CM12 nightlies coming out at the moment, or am i wrong?
Click to expand...
Click to collapse
I'll post a LP version tomorrow. it's working fine. The current is kitkat.
Amazing kernel indeed, only thing missing is RGB color correction, because of purple-ish color on low brightnes settings. Keep on good work!
I'm using Battery by Macropinch to monitor amperage. The latest kernel using the smartmax governor, I'm happy to report, is dipping into the 100mA range quite frequently with wifi and LTE on using the the 1-15-2015 cm12 build. I was getting upset that my cheap Huawei Y536A1 LTE phone was hitting this range on stock and lasting two days on a single charge and my Moto X was staying in the 400-500mA without even touching it, but now I think I think this is a good early indication that we can be seeing good idle and casual use power drain on the moto x. Cheers!
PS: I never post, I didn't mean to post this in the Q&A section. How do I delete it?
is double tap to wake coming?
690sid said:
is double tap to wake coming?
Click to expand...
Click to collapse
Actually, it's in the kernel I last uploaded, just fails to keep the touchscreen alive. Once I fix that, we'll have it. Give me a week -- very busy with work.
tdhite said:
Actually, it's in the kernel I last uploaded, just fails to keep the touchscreen alive. Once I fix that, we'll have it. Give me a week -- very busy with work.
Click to expand...
Click to collapse
okay man... really appreciate your work.
Wanted to ask, is there a way to temporarily deal with the memory leak of lollipop using the kernel?
i have moto x sprint UBL. and now I use cm12 5.02 nightly
does this kernel works for me?
thx
redo777 said:
i have moto x sprint UBL. and now I use cm12 5.02 nightly
does this kernel works for me?
thx
Click to expand...
Click to collapse
I can confirm this kernel works as a sweety on cm12 and on ! For battery wise settings of this kernel I recommend smartmax.
Is this the only android 5 compatible kernel we have , us the ghost ppl .. ?
---------- Post added at 12:01 AM ---------- Previous post was at 12:01 AM ----------
Can we hope to see an update any time soon ?
ban.codrut said:
Can we hope to see an update any time soon ?
Click to expand...
Click to collapse
Posted. Check the dev thread Downloads post.
work on cm12
hi can i flash this kernel in cm12 ?
great
Running on candy5 (ghost) with sweetener, droid maxx xt1080 rooted and unlocked! Everything is running great so far, I'll give you some feedback in a few days! Thanks for all the hard work!
help
I have this Kernel (20/7) on my Ressurection Remix. Who is the best configuration to save battery ? I need to know :
- Best CPU Governor
- Best CPU Voltage
-Best GPU Governor
- Etc
Really Thanks. Any help is great.
RealONE Kernel for Moto X 2014!
Only CM or based CM versions like RR,NX...
And only Android M too
Features:
Compiled with UBERTC 4.9.4
Optimized Entropy
FauxSound
Power Suspend
Improved accuracy of MultiCore
CRC disabled by default( 30% extra perfomance on I/O)
Swappiness reduced to 15%
UnderClock CPU (268 Mhz)
Activated Power Eficcient Worqueues
#Governors:
ZZmove
Intellidemand
Smartmax Extreme Power Saver (eps)
Intelliactive
#Hotplugins:
MSM_Hotplug
Intelliplug
Alucard
MSM MP Decision
#I/O Schreduler:
Added Zen
All credits goes to Michel Borges
Thanks Leonardo Augusto
Thanks Faux123
Source of the Kernel on github:
https://github.com/RealOne-Kernel/RealOne-Victara-Kernel
could you give instructions on how to flash a kernel in our device?
marquesini said:
could you give instructions on how to flash a kernel in our device?
Click to expand...
Click to collapse
This is not the place for that.
jlink38 said:
This is not the place for that.
Click to expand...
Click to collapse
oh, ok.
then I dunno, pm me an external link for that ? i really want to try change the kernel, but don't want to mess up the device, i could google it but preffer a recommendation of a tutorial by someone who understands more about it than i dunno.
anyway, thanks.
Hello, your kernel is very good, very fluid and good battery consumption in CM13, it would be possible in the future to add support KCAL?, can change the saturation, contrast, etc., thank you for your work.
[DEV][PATCH] KCAL - Advanced color control for Qualcomm MDSS 8x10/8x26/8974/8084/8939
Great kernel. Has improved battery life quite a bit !
Thanks!! Testing on CM13... Looks good
Good battery consumption.
Sent from my XT1095 using Tapatalk
Great kernel so far, thanks for making a custom kernel for 6.0, I've been waiting for one.
Would it be possible for you to add support for DriveDroid to your kernel?
http://forum.xda-developers.com/showthread.php?t=2196707
https://play.google.com/store/apps/details?id=com.softwarebakery.drivedroid&hl=en
Thxx , give me more feedbackk ! And I'll take a look at suggestions at the weekend guys !!
Can't wait to see what this can do..bout to flash now!!!
some people say they are taking random reboots .. anyone had ? maybe a log for me ?
MichelBorgess said:
some people say they are taking random reboots .. anyone had ? maybe a log for me ?
Click to expand...
Click to collapse
Yes i had that issue, but i reflashed cm, I'll retry tomorrow and get you some logs (hopefully i have time, I'm doing my finals now...).
MichelBorgess said:
some people say they are taking random reboots .. anyone had ? maybe a log for me ?
Click to expand...
Click to collapse
I'll try.its happened a few times to me
---------- Post added at 08:47 AM ---------- Previous post was at 08:39 AM ----------
Where can I post my logcat?
http://pastebin.com/ try this
Your kernel its a dream hahahaha I was waiting for a kernel with fauxsound since I've bought this phone. So, first of all, thank you very much for your kernel and we appreciate your work and your time spent with this kernel. But lets get to the facts:
1) In RR 5.6.0 your kernel cause bootloop;
2) In CM13 (specifically 2015-12-12 build) I had a lot of random reboots and the sound (specifically Play Music and Deezer) sometimes was cracking or just not played;
3) In CrDroid I had the same thing in CM13 but the rom has some serious bugs, so we don't count it;
4) In Nexus Experience 10.0.4 I just had ONE random reboot (take note: the first boot, so lets blame the instability of the rom) and, since then, my phone is working completely perfect.
5) With kernel auditor all of my preferences are saved and sticked after a reboot (in Nexus Experience 10.0.4)
Note: All of the Roms was fresh installed, wiped everything (including internal storage) then installed ROM->GAPPS (NX GApps in Nexus Experience and OpenGApps in the other roms)->KERNEL
Maybe with some work in your kernel and in the newer roms, this phone will gain some fresh air!
Thank you again!
Ps.: not an american guy, so please, I'm sorry for any english mistake
victor19 said:
Your kernel its a dream hahahaha I was waiting for a kernel with fauxsound since I've bought this phone. So, first of all, thank you very much for your kernel and we appreciate your work and your time spent with this kernel. But lets get to the facts:
1) In RR 5.6.0 your kernel cause bootloop;
2) In CM13 (specifically 2015-12-12 build) I had a lot of random reboots and the sound (specifically Play Music and Deezer) sometimes was cracking or just not played;
3) In CrDroid I had the same thing in CM13 but the rom has some serious bugs, so we don't count it;
4) In Nexus Experience 10.0.4 I just had ONE random reboot (take note: the first boot, so lets blame the instability of the rom) and, since then, my phone is working completely perfect.
5) With kernel auditor all of my preferences are saved and sticked after a reboot (in Nexus Experience 10.0.4)
Note: All of the Roms was fresh installed, wiped everything (including internal storage) then installed ROM->GAPPS (NX GApps in Nexus Experience and OpenGApps in the other roms)->KERNEL
Maybe with some work in your kernel and in the newer roms, this phone will gain some fresh air!
Thank you again!
fix in next build
Click to expand...
Click to collapse
Yo guyss ! I redid the kernel, and apparently restarts stopped .. is still simpler, more 'll keep updating
zzmoove
intelliplug
IO Zen
https://www.androidfilehost.com/?fid=24340319927533603
I don't understand this thread. The OP has a different username the one above who has released v2? And why hasn't this been moved to 'original development'?
floepie said:
I don't understand this thread. The OP has a different username the one above who has released v2? And why hasn't this been moved to 'original development'?
Click to expand...
Click to collapse
I just asked for Vinicius post for me , since I had not yet allowed to post in section ...
For those familiar with Velocity Rom this is the kernel I build for it. Velocity hasnt been on XDA as a rule so Im sure not many are familiar. Velocity is my personal Rom Ive been building for years and have shared with all that are interested. This isnt and will never be an "official development project" but will always exist as long as I continue to develop Android roms.
Velocity is focused on speed, stability, and efficiency and not on adding every imaginable feature. As this is my personal Rom it will have everything I deem useful to me and/or that doesnt compromise the goals of the project.
I dont add every conceivable governor, I/O scheduler, or other user tweakable options. In fact, I typically remove all the options and keep the best. This is designed as a plug and play kernel, not something to be changed. Its also not designed for other Roms.
Please do not ask for features, ETA's, or related. Again, this is my personal kernel for my personal Rom and will be shared accordingly. That said, I do encourage healthy, friendly dialog in my threads.
Flashing instructions
1) Reboot to bootloader
2) Fastboot boot 'bootimage_name'.img to make sure it boots with no issues
3) Reboot to bootloader again
4) Fastboot flash boot 'bootimage_name'.img
5) Buckle up for safety - optional of course
Changelog
Download
Source
Thanks for this!
It's great to see another person building for our device. Not that the others aren't doing great work, but the more the merrier.
Once Q source drops, the real fun will begin. I can see potential for crazy speed and battery life over 10 hrs SOT on Q. Im coming from Shamu (Nexus 6) so this is quite a change in use and development. I think Im getting a good handle on what makes it tick though.
Question, am running bootleggers rom, kernel flashed fine and everything smooth, only thing wifi was broken, I wiped dalvik and restart phone issue still persist.
Tmobile 3axl
jsanta11 said:
Question, am running bootleggers rom, kernel flashed fine and everything smooth, only thing wifi was broken, I wiped dalvik and restart phone issue still persist.
Tmobile 3axl
Click to expand...
Click to collapse
Not surprising. This is why I stated it works on stock but no idea on custom ROMs. I can cook a boot image if you want to try that, but that would also be based on stock.
Boot image is up in the same folder if you want to try that, but this really is designed to run on either my Rom or stock. Once velocity is out I won't be building stand alone kernels.
ctfrommn said:
Not surprising. This is why I stated it works on stock but no idea on custom ROMs. I can cook a boot image if you want to try that, but that would also be based on stock.
Boot image is up in the same folder if you want to try that, but this really is designed to run on either my Rom or stock. Once velocity is out I won't be building stand alone kernels.
Click to expand...
Click to collapse
My bad I overlooked that part.. Understood, I'll wait till you cook up the rom and rock with it.. Thanks in advance
Android 10 kernel coming soon. Got it all working correctly now. Will be a magisk patched boot.img for now as that seems to work best.
I don't see any files in the pixel 3a xl folder
Which file is the correct one to download? Folders are showing as empty?
oranget said:
Which file is the correct one to download? Folders are showing as empty?
Click to expand...
Click to collapse
I just updated all the folders and OP. I just uploaded the build to the current link in the OP.
Kernel flashed great....running it now. Will reply soon on overall usage. I flashed it through EX kernel manager.
V10.1 uploaded......see changelog for differences
ctfrommn said:
V10.1 uploaded......see changelog for differences
Click to expand...
Click to collapse
And so it begins. Thank you my friend!
Yes, expect a lot of builds for the next week or two. I'm trying to work on the ROM side too but 10 is very different than Pie and so it's slow going.
Works nicely. Thanks for your effort!
sysak said:
Works nicely. Thanks for your effort!
Click to expand...
Click to collapse
How is your battery life compared to the previous version?
Wasn't on it long enough but I would expect they would be the same. Honestly I won't get a good battery cycle until I'm done getting this where I want it. I'm already several versions newer than 10.1
ctfrommn said:
Wasn't on it long enough but I would expect they would be the same. Honestly I won't get a good battery cycle until I'm done getting this where I want it. I'm already several versions than 10.1
Click to expand...
Click to collapse
Well, thank you for your continued work.
v10.2 up
I had an issue with touchscreen not working when waking up from sleep on 10.2. I use the fingerprint and if i unlock the phone from sleep (always on display showing) touch wont work but if i wake it, switch off the screen with the button and unlock again quickly then it's ok. Reverted to 10.1