Database Develop

[Q] Best Heavy Duty Case for N6

Ok so i got my N6 back in November, and one thing that is clear to me is the fact that is phone is not a caseless phone or even a TPU phone...It is extreme fragile so much so that that I broke mine 4 days after having it naked, and someone broke their with the case that I had ordered off amazon the night I brought my phone...
Even my lifestyle a TPU case is probably not going to cut it for me so I'm looking for a really good Heavy Duty Case (tragic waste of a beautiful phone)
I found these on amazon Supcase and Poetic
The Supcase have pretty good review...none for the poetic...anyone have either one that can give me a bit of insight?
Please and thank you.

Ringke max? It's a two layer case and is pretty protective while providing a good value.
Sent from my Nexus 6 using Tapatalk

zephiK said:
Ringke max? It's a two layer case and is pretty protective while providing a good value.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I actually have the Ringke Max on now, and its only a single layer protection, also the reason I want a new case is because someone reported breaking their screen with the Ringke on...It's probably would not have broke with if he had a TGSP on (not sure if he did actually, I'm just assume here)
Just wanted a full body case, cause I really don't think Motorola would replace my phone for free again if I broke it again lol :laugh:
**Edit**
Just saw that the Max is 2 layer...the hard layer is just built onto the soft...interesting design.

Gungrave223 said:
I actually have the Ringke Max on now, and its only a single layer protection, also the reason I want a new case is because someone reported breaking their screen with the Ringke on...It's probably would not have broke with if he had a TGSP on (not sure if he did actually, I'm just assume here)
Just wanted a full body case, cause I really don't think Motorola would replace my phone for free again if I broke it again lol :laugh:
**Edit**
Just saw that the Max is 2 layer...the hard layer is just built onto the soft...interesting design.
Click to expand...
Click to collapse
I've dropped my Nexus 6 at the gym with a Cruzerlite TPU case and it fell onto the steel leg on the bench press and it was fine. I thought it would have broken by how it fell but time and time again I'm surprised by TPU cases.

Pilz said:
I've dropped my Nexus 6 at the gym with a Cruzerlite TPU case and it fell onto the steel leg on the bench press and it was fine. I thought it would have broken by how it fell but time and time again I'm surprised by TPU cases.
Click to expand...
Click to collapse
yea, and ordinarily I would be happy with just a tpu case, cause I don't like bulk in fact I dont even like cases on an expensive phone that looks great...but considering how I crack my screen with this phone the first time....I'm extremely cautious with this phone right now :crying:
I also have the Cruzerlite (best looking case so far) but it just dont feel safe enough for me. I just use a TPU and TG for the screen maybe that will be enough...

Gungrave223 said:
yea, and ordinarily I would be happy with just a tpu case, cause I don't like bulk in fact I dont even like cases on an expensive phone that looks great...but considering how I crack my screen with this phone the first time....I'm extremely cautious with this phone right now :crying:
I also have the Cruzerlite (best looking case so far) but it just dont feel safe enough for me. I just use a TPU and TG for the screen maybe that will be enough...
Click to expand...
Click to collapse
I've dropped many phones with a Cruzerlite and never broken a screen. I broke a tempered glass screen protector on my G3 but the phone was fine. Maybe I'm just lucky I can't stand bulky cases. I know how you feel because if I broke my screen I would be upset so I bought moto care just in case.

how about spigen
http://www.amazon.com/dp/B00OH4HZFI...colid=7RUAYDAM88DR&coliid=I1TPLHMALQGPS&psc=1
or
http://www.amazon.com/dp/B00OH4HOOA...olid=7RUAYDAM88DR&coliid=I26NEKSI51U3BY&psc=1
or
http://www.amazon.com/Nexus-Case-Sp...sim_cps_6?ie=UTF8&refRID=18ZJ2HMXA6XV7AGFW9YD
I am considering them personally

abogrhen said:
how about spigen
http://www.amazon.com/dp/B00OH4HZFI...colid=7RUAYDAM88DR&coliid=I1TPLHMALQGPS&psc=1
or
http://www.amazon.com/dp/B00OH4HOOA...olid=7RUAYDAM88DR&coliid=I26NEKSI51U3BY&psc=1
or
http://www.amazon.com/Nexus-Case-Sp...sim_cps_6?ie=UTF8&refRID=18ZJ2HMXA6XV7AGFW9YD
I am considering them personally
Click to expand...
Click to collapse
I wouldn't use the Neo Hybrid unless they fixed the extremely tight fit issue. My bumper broke in less than a week on my Spigen because of this and don't forget you can use that case with a skin. I posted pictures way back when this happened in the Spigen OP. The Slim armor is alright I still have mine because it wasn't worth paying for the shipping to return it.

Pilz said:
I wouldn't use the Neo Hybrid unless they fixed the extremely tight fit issue. My bumper broke in less than a week on my Spigen because of this and don't forget you can use that case with a skin. I posted pictures way back when this happened in the Spigen OP. The Slim armor is alright I still have mine because it wasn't worth paying for the shipping to return it.
Click to expand...
Click to collapse
well i went ahead and got the supcase cause i going to be out in the field for a couple of weeks and electronic devices always gets a beating so ill use the sup case for a few weeks and see how it stands up to military life.

Gungrave223 said:
well i went ahead and got the supcase cause i going to be out in the field for a couple of weeks and electronic devices always gets a beating so ill use the sup case for a few weeks and see how it stands up to military life.
Click to expand...
Click to collapse
You should be fine with the Max then, what branch are you in?

Pilz said:
You should be fine with the Max then, what branch are you in?
Click to expand...
Click to collapse
that would be the army.

Gungrave223 said:
that would be the army.
Click to expand...
Click to collapse
I was in the USMC (got our back in 2012) so I know how it is. The field is never kind to phones, after I was in afghan my iPhone 3gs at the time managed to get sand under the screen

I have almost every case mention in this thread. I've posted pictures already but I will keep this short in sweet. Hands down best protection case is the Supcase, but it's extremely bulky. A much better option is the iblason slim. Provide excellent protection, probably 80% of the supcase, but nowhere near as bulky. I just left that case and now I'm using the S-Case because I wanted something smaller, I have moto care so if I break my phone I will get a new one. My new case will be here next week.... review to follow

Best Case:
1)SUPCASE [Heavy Duty] Belt Clip Holster Case for Google Nexus 6 (2014 Release) [Unicorn Beetle PRO Series] Full-body Rugged Hybrid Protective Cover with Built-in Screen Protector (Black/Black), Dual Layer Design + Impact Resistant Bumper.
http://www.amazon.com/SUPCASE-Full-...0259347&sr=8-2&keywords=Nexus+6+Case,+SUPCASE
2)Ballistic tough-jacket-maxx.
https://www.goballisticcase.com/shop/motorola/nexus-6/tough-jacket-maxx/#.VKdx2yvF9p4
Best Tempered glass screen Protector:
Jelly Comb Premium 9H Tempered Glass Screen Protector for Nexus 6 - Anti-scratch Oleophobic - Anti Shatter - 0.3mm Ultra Slim.
http://www.amazon.com/Nexus-Screen-...+Oleophobic+-+Anti+Shatter+-+0.3mm+Ultra+Slim

I'm thoroughly enjoying my heavy duty supcase with the holster. For the past few years I've used wallet cases on my Galaxy notes. I m happy I went this route.

Slim case to cover sharp side edges?

I like the edge but I don't like the sharp metal rim/edge feeling on the side when I hold it. Is there a slim like case that would cover it?

I have the Spigen Neo Hybrid http://www.amazon.com/gp/product/B00SV635BG/
they have them in clear too.

Rearth Ringke Fusion
You might also want to look at the Rearth Ringke Fusion Case. It has pretty slim yet solid sides and a transparent back.

this looks good
http://www.amazon.de/gp/product/B00TQ03PMU/ref=noref?ie=UTF8&psc=1&s=telephone

I tried 2 Spigen ones (neo hybrid and another), but I like this Obliq the best.
http://www.amazon.com/gp/aw/d/B00UA7LTFS

Spigen Slim Armor is working pretty well so far...

I love this case. Great price to.
I've been using this one. Love it.
http://www.amazon.com/gp/product/B00SV63WVE/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

HotInEER said:
I've been using this one. Love it.
http://www.amazon.com/gp/product/B00SV63WVE/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
When I bought the Slim Armor, I also purchased the Space Crystal version of that case.. Really nice. I almost want to say the phone's design lends itself perhaps a little too much to having some kind of case. If it wasn't for that, I probably would have gone with the regular S6. I don't regret getting the Edge though.

HotInEER said:
I've been using this one. Love it.
http://www.amazon.com/gp/product/B00SV63WVE/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
yep, using this one too and no issues at all

wase4711 said:
yep, using this one too and no issues at all
Click to expand...
Click to collapse
How annoying is the back film? I've been debating the Spigen, but the horribly cut back film puts me off a lot. That being said, I'm waiting for the Verizon Galaxy S6 Edge Gold, which puts me in the unfortunate position of not being able to test anything out currently.

inkrededibles said:
How annoying is the back film? I've been debating the Spigen, but the horribly cut back film puts me off a lot. That being said, I'm waiting for the Verizon Galaxy S6 Edge Gold, which puts me in the unfortunate position of not being able to test anything out currently.
Click to expand...
Click to collapse
well, frankly, since I look at the front of the phone more than the back, and when the case is on, you don't see the back that clearly anyways. I't nice the film is there to protect the back from being scuffed by any case, but, I guess you would be fine if you didn't bother with it..

whittikins said:
I tried 2 Spigen ones (neo hybrid and another), but I like this Obliq the best.
http://www.amazon.com/gp/aw/d/B00UA7LTFS
Click to expand...
Click to collapse
whats the grip on the obliq case like? Im using the official samsung case atm (the clear one without the flip cover) and it gets super slippery after a little while.

HotInEER said:
I've been using this one. Love it.
http://www.amazon.com/gp/product/B00SV63WVE/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
+1 for this case as well. I got the metal slate. It ended up being black rubber but still looks great. The rubber really helps with the grip and the clear back and slim profile really show off the sexiness of the phone.

Speaking of sharp sides, the Spigen Slim Armor has really sharp edges where the TPU meets the plastic. Was using the phone for a couple of hours, and the sides of the case and the cutouts for the ports were digging into and irritating my hands. While the overall form factor is nice (it doesn't thicken the phone too much), I'll be getting another case instead.
Did anyone else have this issue?

What's the lightest but still good case for LG G4

I have the I-Blason Clear Halo case on the phone. It looks nice and fits fairly well except for the bottom where it's not as high as the top and the sides. Goes on and off easily, even over the leather back. But it weighs 26 grams. That's a lot of extra weight for this phone. The Diztronic TPU case is 18 grams and they usually make nice cases. Would love to go bareback but I'm not quite that brave. Anyone found anything lighter that still provides some protection?

rgs2 said:
I have the I-Blason Clear Halo case on the phone. It looks nice and fits fairly well except for the bottom where it's not as high as the top and the sides. Goes on and off easily, even over the leather back. But it weighs 26 grams. That's a lot of extra weight for this phone. The Diztronic TPU case is 18 grams and they usually make nice cases. Would love to go bareback but I'm not quite that brave. Anyone found anything lighter that still provides some protection?
Click to expand...
Click to collapse
lol, I just posted about a sale on this one, it was 30 but a new seller has it for 25 including shipping.
It is about 9 grams according to the seller page, but it is bareback. I got the leather though, so that is what I was looking for. Also it looks like it is an officially licensed lg case so it should fit the curve perfect.
Once I get mine in I will do a review. I hope this helps:highfive:

Thanks. I'm looking forward to your review.

What my knowledge and experience say is that the "revolution" case is super rugged, protective and durable it has a *screen protector and is impact shock and water resistant, ( will fit leather backing) its also light in weight and very much secured.

For this situation,a tpu case would a good choice.

I've got the diztronic. While nice and adds good protection I think it's too thick and heavy. Really takes away from the elegance of the G4. I've ordered the Nilkin Nature and heard it is very light and thin. Not much if any drop protection, but added grip and scratch protection

jbdan said:
I've got the diztronic. While nice and adds good protection I think it's too thick and heavy. Really takes away from the elegance of the G4. I've ordered the Nilkin Nature and heard it is very light and thin. Not much if any drop protection, but added grip and scratch protection
Click to expand...
Click to collapse
Diztronic is one of my favourites. Been using it on my Nexus 5 for more than a year, dropped it numerous times and nothing ever happened. For the G4 however, I ordered Ringke Slim, which provides only basic protection, as I wanted something slimmer. Haven't received it yet, but if I'm not satisfied with it, I'm gonna go with Diztronic again.

rgs2 said:
I have the I-Blason Clear Halo case on the phone. It looks nice and fits fairly well except for the bottom where it's not as high as the top and the sides. Goes on and off easily, even over the leather back. But it weighs 26 grams. That's a lot of extra weight for this phone. The Diztronic TPU case is 18 grams and they usually make nice cases. Would love to go bareback but I'm not quite that brave. Anyone found anything lighter that still provides some protection?
Click to expand...
Click to collapse
I have the same case as you. I don't mind the weight too much, but I agree that it does add more than i expected. My phone looks like one of those leather couches with the plastic covering it .

inpherknow said:
I have the same case as you. I don't mind the weight too much, but I agree that it does add more than i expected. My phone looks like one of those leather couches with the plastic covering it .
Click to expand...
Click to collapse
Good comparison! Now I can't look at it without thinking about those plastic covered couches.

benmarc said:
What my knowledge and experience say is that the "revolution" case is super rugged, protective and durable it has a screen protector and is impact shock and water resistant, ( will fit leather backing) its also light in weight and very much secured.
Click to expand...
Click to collapse
Don't care for the looks but I like the rest of what you said. I'll check it out.

0rigin said:
Diztronic is one of my favourites. Been using it on my Nexus 5 for more than a year, dropped it numerous times and nothing ever happened. For the G4 however, I ordered Ringke Slim, which provides only basic protection, as I wanted something slimmer. Haven't received it yet, but if I'm not satisfied with it, I'm gonna go with Diztronic again.
Click to expand...
Click to collapse
Interesting. Looking forward to your comments on the Ringke.

james491225 said:
For this situation,a tpu case would a good choice.
Click to expand...
Click to collapse
Maybe so. Can you recommend a good one?

I picked up a basic Insignia™ brand case at Best Boy. Good edge coverage, snug fit and all cases should have something very close to what has been incorporated into this design -
actual textured grip enhancement on the side-edges. I've been *****in about this for years and here it finally is . . . on a low cost case.

The Spigen Exact Fit is my fave. Super thin, protects all sides. Cheap too but quality. It is a hard shell case. I dislike the TPU cases on anything other than tablets.
I had Ringke before but its coated plastic. Eventually the color starts to wear off. I had a metallic gray and it was black underneath.
The spigen is a solid color throughout.
The only thing I dislike is it is slick. I had a Incipio Feather on my G2 and it had a rubber type coating that I prefer. But Incipio isnt making a Feather case so the Spigen Exact Fit is thr best choice IMO.

I've got the Ringke Slim case. If you're looking for a very slim, not in the way case, this is a very good choice. Very tight fit with a slight lip so the screen doesn't touch whatever you put it on when placed face down. I love it since it barely adds any size or weight while still offering some protection. Only downside is it's very, very difficult to take off since it's a tight fit. If you're planning on swapping out batteries often or changing backs, this case may not be the best option.

Easy Removal and Lightweight??
This Ringke looks to be lightweight, and easy to remove. I need both of these abilities with my G4, because I replace the battery at least once a day. Does anyone know of any other cases that are both lightweight and easy to remove (I have the tan leather backed version from T-Mobile)??

The UAG is surprisingly lightweight considering the protection it provides. I love it.
Sent from my LG-H811 using XDA Free mobile app

I have verus verge, and though it fits perfect with all cuts and it is rugged and good finish. It does add a heft to device.

jaggrey said:
The UAG is surprisingly lightweight considering the protection it provides. I love it.
Sent from my LG-H811 using XDA Free mobile app
Click to expand...
Click to collapse
Looks very interesting but I wish they would tell us the weight.

Ringke Slim and Spigen Exact Fit are the same style hard cases.
I chose the Spigen because I didn't like the lines in the corner of the Ringke Slim, or the speaker cut out.
The Spigen, IMO, looks better. It also comes in Teal.

Thinnest case

What is the thinnest case out? I don't necessarily like cases...just want something as thin as possible for scratch protection.

Rinkge Slim is probably the thinnest. It fits VERY well and is about as minimal as it gets. I really like it.
However, I switched to a TPU case because I can be a bit clumsy and needed more protection from drops on pavement.

If you just want scratch protection then a skin is the way to go.
Sent from my Nexus 5X using Tapatalk

sn0warmy said:
Rinkge Slim is probably the thinnest. It fits VERY well and is about as minimal as it gets. I really like it.
However, I switched to a TPU case because I can be a bit clumsy and needed more protection from drops on pavement.
Click to expand...
Click to collapse
I have this one and have had it on past phones and I felt it made the 5x quite a bit bigger for a "thin" case. Maybe because its designed to fit flush with the camera and since the camera protrudes out, it the case does too.

EeZeEpEe said:
If you just want scratch protection then a skin is the way to go.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
I have a dbrand on the way.

There is a thread here about the LG hardshell. I think it's about as thin as it can get, similar to the sand paper like hard cases

jbdan said:
There is a thread here about the LG hardshell. I think it's about as thin as it can get, similar to the sand paper like hard cases
Click to expand...
Click to collapse
fitchpuckman said:
I've heard a lot about this one... Also the Nillkin Nature case keeps coming up, too, and lists itself as .66mm thick. That's a pretty slim case, and would be far thinner than my Cimo tpu case. I'm probably going to order both the Nillkin and Lg Hardshell and see which one is best. I like that the Nillkin comes in clear and smoked options, too, instead of just solid colors. Haven't been able to confirm that option on the LG case since it doesn't appear for sale in the US just yet.
Click to expand...
Click to collapse
Based on this guy's caliper and Amazon.com, the Nillkin should be quite a bit thinner than the LG case...
http://forum.xda-developers.com/nex...ll-snap-thinnest-hard-case-lip-t3268751/page2

Nillkin nature tpu case. Also has the best feeling buttons I ever had with a silicone case. Ports on bottom have protection . also nice

sn0warmy said:
Rinkge Slim is probably the thinnest. It fits VERY well and is about as minimal as it gets. I really like it.
However, I switched to a TPU case because I can be a bit clumsy and needed more protection from drops on pavement.
Click to expand...
Click to collapse
IMO the Ringke and Spigen "slim" cases look like Otterboxes in comparison to the LG Snap On, that one is basically like a hard skin. The quicksand cases are similar to those in thickness.
fitchpuckman said:
Based on this guy's caliper and Amazon.com, the Nillkin should be quite a bit thinner than the LG case...
http://forum.xda-developers.com/nex...ll-snap-thinnest-hard-case-lip-t3268751/page2
Click to expand...
Click to collapse
How thin is the Nilkin? I don't see it advertised. The LG Snap On is advertised at 0.75mm but we don't know at which point of the case they measured.
The Nilkin is a gel case, or "condom" case as I like to call them. They are thin but that's about all they have going for them.

bblzd said:
IMO the Ringke and Spigen "slim" cases look like Otterboxes in comparison to the LG Snap On, that one is basically like a hard skin. The quicksand cases are similar to those in thickness.
How thin is the Nilkin? I don't see it advertised. The LG Snap On is advertised at 0.75mm but we don't know at which point of the case they measured.
The Nilkin is a gel case, or "condom" case as I like to call them. They are thin but that's about all they have going for them.
Click to expand...
Click to collapse
The nillkin is advertised at. 0.6mm. Not much for rugged protection, I suppose, but should be nice for some coverage without added bulk. Mine just shipped (from somewhere in east Asia) and should be here in about 2 weeks. Will keep y'all posted.

The Lg case has a s light inward curve to it so it's hard to get measurements. After trying multiple angles the thinnest I got was .80, that's coming straight up from the bottom.

Diztronic hands down

fitchpuckman said:
The nillkin is advertised at. 0.6mm. Not much for rugged protection, I suppose, but should be nice for some coverage without added bulk. Mine just shipped (from somewhere in east Asia) and should be here in about 2 weeks. Will keep y'all posted.
Click to expand...
Click to collapse
Just got the Nillkin. Definitely the thinnest TPU case I've ever owned. Also the buttons still retain most of their clicky feedback. This has happily replaced the Orzly as my main case.

fascinate said:
Just got the Nillkin. Definitely the thinnest TPU case I've ever owned. Also the buttons still retain most of their clicky feedback. This has happily replaced the Orzly as my main case.
Click to expand...
Click to collapse
This is awesome to hear. I'm pumped...the next 10+ days of waiting for mine to arrive from China are going to be tough! Mind if I ask, from where did you order yours?

fitchpuckman said:
This is awesome to hear. I'm pumped...the next 10+ days of waiting for mine to arrive from China are going to be tough! Mind if I ask, from where did you order yours?
Click to expand...
Click to collapse
Bought it from the below listing. Ordered on Dec. 19 and received it on Dec. 29 (Shipped to US). Let us know how you like the case when it arrives!
http://www.ebay.com/itm/252207673672

I have a PLESON before and it works well,is there anyone who also have bought from pleson?

fascinate said:
Bought it from the below listing. Ordered on Dec. 19 and received it on Dec. 29 (Shipped to US). Let us know how you like the case when it arrives!
http://www.ebay.com/itm/252207673672
Click to expand...
Click to collapse
I've got my Nillkin Nture TPU case. It's awesome! I don't have pics yet, but will try getting some for y'all when possible. In short, it's amazingly thin for TPU, adding minimal bulk. This is far superior and much thinner than my Cimo TPU case. It's not going to offer much drop protection, but I'm not too concerned about that. Plus it'll certainly prevent scratches. It also has a slight raised edge at the bezel so you can set the phone screen-down on a flat surface and the screen won't touch, but the added bonus here is that since its such a thin case, the offset is minimal which makes it MUCH easier to swipe left-to-right (for example to open an app menu or Google Now) than thicker TPU caes (which can often make it hard to touch the edge of the screen.
Anyway, I'm really happy about this case. It does had small flaps that cover and plug the charging alot and headphone jack, which I waver between liking and disliking. However, those could easily be cut off if wanted. Anyway, easily the best $10 I've ever spent on a case.

fascinate said:
Bought it from the below listing. Ordered on Dec. 19 and received it on Dec. 29 (Shipped to US). Let us know how you like the case when it arrives!
http://www.ebay.com/itm/252207673672
Click to expand...
Click to collapse
Hey I see the listing color options are white, gray, or gold. What color did you get? I'm wondering if by "white" do they actually mean clear?

SeriesOfTubes said:
Hey I see the listing color options are white, gray, or gold. What color did you get? I'm wondering if by "white" do they actually mean clear?
Click to expand...
Click to collapse
Yup, the white is actually clear. That's the one I bought.

My Nillkin is on its way from China. I'm excited to get it. I'm using the Ringke Fusion right now and I think the profile is slim along the edges but the extra thickness is killing me.
With the Nillkin should I look into getting a screen protector for the camera lens or does the case lip around the camera keep it from touching the surface?

OnePlus accessories quality / suitable

Hello,
Here you can add some real life review about the original produits proposed by OnePlus itself for the OP3, like TGSP, case, ...
Thank you.

Getting my Rosewood case tomorrow. Hope will fit well.
Heard it doesn't give too much of a protection and scratches a bit.

piotrkruczek said:
Getting my Rosewood case tomorrow. Hope will fit well.
Heard it doesn't give too much of a protection and scratches a bit.
Click to expand...
Click to collapse
yeah you're right. my brother had one on his old oneplus x. The protection wasn´t very good.
I bought me the flip case original from oneplus for my op3. The quality is ok but it have no magnet so the cover get open on its own
After these i bought me finally a Case by Tudia.
Amazon link https://www.amazon.de/Tudia®-OnePlu...id=1473771743&sr=8-4&keywords=oneplus+3+tudia
UK link (i live in germany so you cant use the german link https://www.amazon.co.uk/TUDIA-Slim...id=1473771803&sr=8-3&keywords=oneplus+3+tudia
Its about 16Euros and about 11 pounds
The TPU are harder then i thought and doesn´t bend too much
The plastic shell on the back are like rubbery. It gives you a very good feeling when holding your phone

After these i bought me finally a Case by Tudia.
Amazon link https://www.amazon.de/Tudia®-On...neplus+3+tudia
UK link (i live in germany so you cant use the german link https://www.amazon.co.uk/TUDIA-Slim-...neplus+3+tudia
Its about 16Euros and about 11 pounds
The TPU are harder then i thought and doesn´t bend too much
The plastic shell on the back are like rubbery. It gives you a very goof feeling when holding your phone
Click to expand...
Click to collapse
Aren't they too big for you? I bought Rosewood Case just because it's stylish and slim in the same time. Strong "armours" are great, but they lack in overall appearance of the phone. And even while phone by itself is minimalistic, in case looks like Nokia 3310
But yeah, it's a matter of preferences. I understand yours.
Cheers!

piotrkruczek said:
Aren't they too big for you? I bought Rosewood Case just because it's stylish and slim in the same time. Strong "armours" are great, but they lack in overall appearance of the phone. And even while phone by itself is minimalistic, in case looks like Nokia 3310
But yeah, it's a matter of preferences. I understand yours.
Cheers!
Click to expand...
Click to collapse
The Case is not too big. It's not an Bullet proof Case.
For me it's perfect and the feeling is much better than with the original Case for me
But everybody have to decide by themself which protection is the best for them
PS: i know the name at Amazon for my case is a little bit strange. It says heavy duty and extreme protection but it's like an normal protection.
But as I said before everyone should buy only one Case which are perfect for themself

I plan on using this.
https://www.amazon.com/gp/aw/d/B01H...F8&qid=1473798799&sr=1&pi=AC_SX236_SY340_QL65
Sent from my SAMSUNG-SM-G891A using XDA-Developers mobile app

I use Orzly Grip Pro case.
Its true to its name.
And apart from being very grippy for oily hands like mine it is stylish as well as protective.

Joyo-rocker said:
I use Orzly Grip Pro case.
Its true to its name.
And apart from being very grippy for oily hands like mine it is stylish as well as protective.
Click to expand...
Click to collapse
Does it makes your hands become wet ? Like you know the sweating due to the case in TPU ?
Thank you

Dogematique said:
Does it makes your hands become wet ? Like you know the sweating due to the case in TPU ?
Thank you
Click to expand...
Click to collapse
Nope bro it's fine for me.

any suggestions on a water-proof or water-resistant case?