I tried and search but nothing really fit my problem. My diamond all of the sudden incoming or out going calls are sound distort, but when I turn on speaker phone it's clearer and better. I tried change Radio, roms but the same thing. My ring tone doesn't sound distort either. Can someone out there help me or someone has similar problem? may replace speaker? software problem?
Best regards
Hello,
My HTC Diamond on last week gets "MicroPError" and no backlight.
I dismounted the phone to clean the interior and fix the connections inside, after mountin it, the backlight was fixed and I was happy with it, because I could fix the problem on my phone, but when I make the first call, i realised that I fixed one problem and get another one.
So now, the problem on my phone is when I make or when I receive a call no one can hear me.
Can someone help me trying to fix my phone.
Best regards
Ya i can help you. The problem is the with the 2 golden hook like connectors.[ Near the camera ] You might have bend it in the process of cleaning.
To be specific , the top portion of the mobile when removed controls the speakers. You can easily spot the golden connector and make sure that it touches the upper metal connector when closing the top cover.
top cover is the one above the battery in this pic
Click to SEE
Hello,
Thanks for your reply, but it didn't solve my problem, I checked what you said, and the connection is normal.
By the way this is not the connector for the speaker? My problem is not on the speaker, my problem is on the microphone.
My problem is not ear the others, but the other can't ear me on a phone call, so the problem is on the microphone, don't you agree?
Do you have another idea for this problem?
Best regards.
artursant said:
Hello,
Thanks for your reply, but it didn't solve my problem, I checked what you said, and the connection is normal.
By the way this is not the connector for the speaker? My problem is not on the speaker, my problem is on the microphone.
My problem is not ear the others, but the other can't ear me on a phone call, so the problem is on the microphone, don't you agree?
Do you have another idea for this problem?
Best regards.
Click to expand...
Click to collapse
Check your microphone connections at the lower bottom . One with a black cap.
Hello again,
Can you please help me identifying the microphone.
Best regards
Hello again,
I checked it again, and the connections of the microphone sims to be fine.
I think the microphone itself is damaged, because I make another test.
I tryed to use the Voice Recorder, and found that if I talk normal on the recorder, when I play the sound, my voice is very low, almost not earable and a lot of noise, if I talk louder, when playing the sound my voice is already possible to ear, but also with a lot of noise, this is the reason for thinking that the problem is on the microphone. By the way, the black cap of the microphone falls down when I opened the phone for cleaning on the first time, is it normal.
If the problem is, as I think on the microphone, is it possible to replace the microphone, or it must be replaced the pc-board.
Best regards.
Suddenly after update the phone I noticed that the upper headset we hear the calls confusion if i raise the sound through the side buttons of the device
Earphone like a perforated
any help
hd7 t mobile
??? help me too
same problem?
hello,
yesterday my cell fell and after then i have strange issue when for example i calling or somebody calling to me
the b-side person cannot hear me and hear some cracking noise
but when i turn the external speaker the b-side can hear me well
kidnly help by point which part i need change ( i saw on ebay botton loud speaker but i am not sure)
thx
***also if someone could share similar problem & advise it will be great!!!!
It;s probably the microphone, not the loudspeaker.
k, thx
also can you confirm if the mic is a part of the usb port charging part?
BR
Hey folks,
I had the problem with the stock ROM and now I have the similar problem with jackeagels 5.5.1 (SM-G800F).
My microphone works sometimes and sometimes doesn't. People I want to call can't hear me. Eventually after a few calls they do. This is a state I don't want to stay in so does one has any idea what the problem could be? A while ago I pulled some dust out of the mic hole (with a needle) but that doesn't seem to be the problem here
Mines always been dust in the hole. Get compressed air can and blast it. Very annoying.
Hey Guys!
I have a similar problem but only when I use the internal mic, the problem does not occur when I use my headset.
Sometimes, the people I'm calling say that they can hear me very quietly.
Mostly, they say that they hear a constant noise or sound like a "bom bom bom" which is in the background. I can't hear this sound myself and as I said it does not occur when the headset is plugged in.
Any help is appreciated!
Regards, Jens
What phone model? What OS?
The main mic is at the bottom, near USB port. Recording a voice note without earphone, of course, works? The mic hole is dirt or blocked somehow?
lfom said:
What phone model? What OS?
The main mic is at the bottom, near USB port. Recording a voice note without earphone, of course, works? The mic hole is dirt or blocked somehow?
Click to expand...
Click to collapse
Thanks for your reply.
It is a G800F with CyanogenMod 13.
I tested the issue after my initial post with the voice recorder in detail.
So the sound is a kind of buzzing like in the early days of mobile phones when you put your phone near a radio and you get an incoming call.
When I record with the voice recorder, then I hear the buzzing. It is stronger when I say something and quiter when I record silence. Then I also made the same test with my headset, and, unfortunately the buzzing also occured. The intensity was bit lower I think but the sound was there.
Unfortunately, I never tested it with the stock rom. Could this problem be related to a software problem? I'm not sure if I backup my CM and install a stock rom for testing...
Thx!
Yeah, the best way to mak sure it's not software is backup and going back to stock. If it still doesn't work then you have a hardware issue almost certainly...