I NEED TO FLASH OR CHANGE ROM IN MY M100S GALAXY S COREAN VERSIO IS THIS POSIBLE
sorry for my poor english
mikeppl said:
I NEED TO FLASH OR CHANGE ROM IN MY M100S GALAXY S COREAN VERSIO IS THIS POSIBLE
sorry for my poor english
Click to expand...
Click to collapse
hi bro, this is only an advise or suggestion.. or educated guess..
since the M100S is found in ASIA.. i guess, you can download the ASIA firmware from the website below and use the latest firmware available.
http://samsung-firmware.webs.com/WEBPROTECT-samsungi9000.htm
**you must be registered to be able to download the firmwares available on the site.
Do take note that your phone does have that antenna feature and korean custom content.. if you do update your firmware to the EU/EURO version.. you might lose the application to be able to use it unless there is a special menu under Settings to configure and use it.
i got a problem with firmware version
i got a problem with firmware version
when i type *#1234#
i got this
PDA: M110S.DF30.1854
PHONE:M110S.DF29.0944.ST
H/W:REVO.8
MOVINANDF29
i really need to flash to european version and lose all corean trash
i really thanks for your help
Isn't Korean phone version slightly different having a TV tuner built in?
Better check if you can easily flash a firmware.
go: http://matpclub.com/board/index.html?id=tipn&no=3
download tools.zip (contains ODIN3 and CSC file for M110S)
follow directions found on XDA or Samdroid -
might be a good read: http://forum.xda-developers.com/showthread.php?t=725407
Hello all,
I have tried to search regarding this issue but did not get any real clear answer to have to solve the problem.
When I check for new firmware for my Galaxy tab 8.9 (GT-P7300) in Kies it says: your device does not support software upgrading via kies
I have had different firmwares in my tab latest ICS_CM9, but I tried to restore original firmware with Clockwork_Recovery_5.5.0.4
But somehow my backup does not seam to be approved by Kies.
When my tab was brand new I wrote down the info from About and this is the data:
Model Number: GT-P7300
Android Version : 3.1
Baseband Version : P7300XXKHC
Kernel version : 2.6.36.3 [email protected]#1 SHP PREEMPT fri Sep 2 16:00:16 KST 2011
Build number : HMJ37 P7300XWKI1
Also could someone from that data say what country model this Tab is supposed to be, I live in Finland (and its bought here) but I don´t get it to add up ...
Any ideas how to get kies to approve my firmware? Soon ICS will be released by Samsung and I like to test the official version. And to do that I probably need to have kies up and running.
This as I like to do it official way , and not true Odin ...
You need to reflash stock firmware, and remove root if you are rooted. Then kies will work.
Sent from my GT-P7310 using XDA Premium HD app
Riche101UK said:
You need to reflash stock firmware, and remove root if you are rooted. Then kies will work.
Sent from my GT-P7310 using XDA Premium HD app
Click to expand...
Click to collapse
I now tried to reflash stock firmware to something i thing was same version as I had from the beginning (http://hotfile.com/dl/145798475/58cc500/P7300XWKI1.zip.html).
I also removed root rights and put back stock recovery, but now kies don't even see what software version i have on my Tab. current software version is blank.
Any more ideas ?
Install app name check fus, it tell you tab product code.
Download lastest stock rom from sammobile.com by select the match version of rom with your product.
Samsung Kies will upgrade only if you have right version of match firmware and product code.
cheers
Sent from my GT-P7300 using XDA
keijames said:
Install app name check fus, it tell you tab product code.
Download lastest stock rom from sammobile.com by select the match version of rom with your product.
Samsung Kies will upgrade only if you have right version of match firmware and product code.
cheers
Sent from my GT-P7300 using XDA
Click to expand...
Click to collapse
Thanks for this info, learned some more but still no luck as sammobile.com don't seam to have my product codes firmware?
Product code was : GT-P7300UWANEE
Any ides for download place ?
Firstly, Odin is the official way. Samsung service centers use Odin to flash firmware on devices. If official ICS will be released, I'm sure we will get a Odin flashable .tar long before the update will show up in Kies for your Nordic tab. So i don't see the point in worrying about Kies, infact i have never used Kies to update any of my Samsung devices. I just don't trust this crappy software.
If you still want to locate your stock rom then send me a PM, i believe i can help you.
I just bought my second I9305 (first one was stolen) and it doesn’t connect to any network band. It is the same International model I had before that worked perfectly. I’m not sure if it has some country code limitation, but the frequencies and bands should be the right ones.
The phone is stock version. Baseband version XXUEMK1.
I’m not sure if I should flash to another Baseband. My cellular service provider works LTE at 1800 frequency and Band 3.
Any clues about what I should do?
Thanks
Henning
hbergold said:
I just bought my second I9305 (first one was stolen) and it doesn’t connect to any network band. It is the same International model I had before that worked perfectly. I’m not sure if it has some country code limitation, but the frequencies and bands should be the right ones.
The phone is stock version. Baseband version XXUEMK1.
I’m not sure if I should flash to another Baseband. My cellular service provider works LTE at 1800 frequency and Band 3.
Any clues about what I should do?
Thanks
Henning
Click to expand...
Click to collapse
Hi,
Which is your stock firmware version JB 4.1.2 ? JB 4.3, or ?
Rooted or not ?
If you want to be sure your phone is OK, just reflash via ODIN your stock firmware from your country (and if you want from your carrier), it includes PDA, CSC and MODEM . Be sure your phone is an internationnal model i9305 and download your firmware HERE or HERE. I recommand this GUIDE from MaHo_66 xda member.
FLooDW said:
Hi,
Which is your stock firmware version JB 4.1.2 ? JB 4.3, or ?
Rooted or not ?
If you want to be sure your phone is OK, just reflash via ODIN your stock firmware from your country (and if you want from your carrier), it includes PDA, CSC and MODEM . Be sure your phone is an internationnal model i9305 and download your firmware HERE or HERE. I recommand this GUIDE from MaHo_66 xda member.
Click to expand...
Click to collapse
Hi, thanks for your reply. I'm not sure where to find these JB numbers tou are asking. The BuIld number is JSS15J.19305XXUEMKC. In Kies appears: PDA: MKC, Phone:MK1, CSC:MK2 (VDI).
The list of firmwares in the Samsung Updates page doesn't have the specific country/carrier I use. How do I know which one is equivalent?
Thanks
Henning
hbergold said:
Hi, thanks for your reply. I'm not sure where to find these JB numbers tou are asking. The BuIld number is JSS15J.19305XXUEMKC. In Kies appears: PDA: MKC, Phone:MK1, CSC:MK2 (VDI).
The list of firmwares in the Samsung Updates page doesn't have the specific country/carrier I use. How do I know which one is equivalent?
Thanks
Henning
Click to expand...
Click to collapse
JSS15J.19305XXUEMKC build correspond to Android 4.3.
What is your country ?
FLooDW said:
JSS15J.19305XXUEMKC build correspond to Android 4.3.
What is your country ?
Click to expand...
Click to collapse
Venezuela, the carrier is Digitel.
hbergold said:
Venezuela, the carrier is Digitel.
Click to expand...
Click to collapse
I've made some googling but I didn't found which modem version you have to use. I guess you have to find a latin america modem version but it has to be compatible with your current Android 4.3 build.
Did you previous stolen i9305 was running Android 4.3 as well ?
Do you know some ways to remember which versions you had on your previous phone ? Do you know someone else with the same phone ?
FLooDW said:
I've made some googling but I didn't found which modem version you have to use. I guess you have to find a latin america modem version but it has to be compatible with your current Android 4.3 build.
Did you previous stolen i9305 was running Android 4.3 as well ?
Do you know some ways to remember which versions you had on your previous phone ? Do you know someone else with the same phone ?
Click to expand...
Click to collapse
Sadly I don't have this information. I only remember that it was a German version. I do have a couple of friends that have the Samsung 4 LTE in my same carrier.
One is: I9055XXUEMK8, the other friend has I905VJUGNE2.
Hope this helps to find out the best version for my Samsung 3.
Thanks again for you help.
Henning
has the
hbergold said:
I only remember that it was a German version.
Click to expand...
Click to collapse
German MODEM Or German PDA ?
I do have a couple of friends that have the Samsung 4 LTE in my same carrier.
One is: I9055XXUEMK8, the other friend has I905VJUGNE2.
Click to expand...
Click to collapse
Those I9055XXUEMK8 and I905VJUGNE2 = MODEM or PDA number ?
FLooDW said:
German MODEM Or German PDA ?
Those I9055XXUEMK8 and I905VJUGNE2 = MODEM or PDA number ?
Click to expand...
Click to collapse
One of the Samsung 4 (brought from Italy-TIM) works perfectaly in my countro (Venezuela), the numbers are:
AP: I9505XXUEMK8
CP: I9505XXUEMK8
CSC: I9505TIMEMJ8
Which would be the equivalent Firmware for the Galaxy 3 LTE?
Could I flash this via Odin?
Thnaks
Henning
hbergold said:
One of the Samsung 4 (brought from Italy-TIM) works perfectaly in my countro (Venezuela), the numbers are:
AP: I9505XXUEMK8
CP: I9505XXUEMK8
CSC: I9505TIMEMJ8
Which would be the equivalent Firmware for the Galaxy 3 LTE?
Could I flash this via Odin?
Thnaks
Henning
Click to expand...
Click to collapse
So try do a clean install by wiping all and flash latest build I9305XXUEML9 from italy (TIM) with Odin. It's Android 4.3 like you currently have.
You can grab it here for exemple : http://samsung-updates.com/details/24460/Galaxy_S_3_LTE/GT-I9305/TIM/I9305XXUEML9.html
Follow MaHo_66 guide.
Don't forget to backup.
I hope it will do the trick.
Hi,hbergold,why not flash the version firmware 4.4.4 Stock.Here you have two versions of 4.4.4:http://samsung-updates.com/device/?id=GT-I9305 So you would be clear if the problem is the modem.I use the version DBT Poland, I live in Spain and everything works great.Version 4.4.4 also includes again the possibility of entering service mode and choose the bands.You can flash it with Odin.Pasate por aqui:http://www.htcmania.com/showthread.php?t=920004
FLooDW said:
So try do a clean install by wiping all and flash latest build I9305XXUEML9 from italy (TIM) with Odin. It's Android 4.3 like you currently have.
You can grab it here for exemple : http://samsung-updates.com/details/24460/Galaxy_S_3_LTE/GT-I9305/TIM/I9305XXUEML9.html
Follow MaHo_66 guide.
Don't forget to backup.
I hope it will do the trick.
Click to expand...
Click to collapse
Thanks FLooDW, I am just a bit concerned that the phone does have KNOX, and the MaHo_66 guide suggests not to flask with this. What are your suggestions?
HB
viktorak said:
Hi,hbergold,why not flash the version firmware 4.4.4 Stock.Here you have two versions of 4.4.4:http://samsung-updates.com/device/?id=GT-I9305 So you would be clear if the problem is the modem.I use the version DBT Poland, I live in Spain and everything works great.Version 4.4.4 also includes again the possibility of entering service mode and choose the bands.You can flash it with Odin.Pasate por aqui:http://www.htcmania.com/showthread.php?t=920004
Click to expand...
Click to collapse
Gracias viktorak, but does this modem work with LTE band 3 (1800) ?
I can`t confirm, but with the the Service Mode you can force the band you will.Have you read the post I linked?Your partner, also from Venezuala wanted to force the band 5 -3G, and according to reported- it works.Then,using Service Mode you can force the band you will.
You need to first install the 4.4.4 Rom and then if it doesn`t work normally use Service mode.
hbergold said:
Thanks FLooDW, I am just a bit concerned that the phone does have KNOX, and the MaHo_66 guide suggests not to flask with this. What are your suggestions?
HB
Click to expand...
Click to collapse
viktorak said:
I can`t confirm, but with the the Service Mode you can force the band you will.Have you read the post I linked?Your partner, also from Venezuala wanted to force the band 5 -3G, and according to reported- it works.Then,using Service Mode you can force the band you will.
You need to first install the 4.4.4 Rom and then if it doesn`t work normally use Service mode.
Click to expand...
Click to collapse
@hbergold, about KNOX, you told me you have an Android 4.3 build, so if it's an official one, you already have a KNOX bootloader (the one from sammy Android 4.3).
About bootloaders:
- if you ever flash 4.3 or 4.4 via Odin or updated from OTA you have new Bootloader from android 4.3 or from 4.4.4.
- if you bought your device and you dont know what bootloader you have, turn off your phone,reboot to download mode (hold power + volume down +home buttons) and when is there Knox flag 0x1 you have new bootloader and you are warranty off. When Knox flag is there 0x0 you have also new bootloader, but you are still in warranty and when you'll flash any custom recovery or unofficial firmware via Odin, you'll have then Knox 0x1 and you will be warranty off - so it's on your deciding. When isn't in download mode any records about about Knox, you still have old bootloader (from android 4.1.2).
- since the new sammy Android 4.4.4 bootloader, now there is also a line in blue color saying ´´SECURE DOWNLOAD : ENABLED''
About @MaHo_66 's opinion, please read here : http://forum.xda-developers.com/showpost.php?p=56506775&postcount=12. I hope he will not find any problem of sharing his post
I also recommand to upgrade to an Android 4.4.4 build but it's your choice and it depends on what you want to do with your phone (install custom ROM or not = warranty stuffs / if you want to sell the phone later, ....). Also I think you will not be able to flash any older official build (Android 4.1.2 or 4.3) if you upgrade to 4.4.4 because of the bootloader. I recommand it mainly because there is no more this random ******* stuck mdm_hsic_pm0 wakelock issue appeared since sammy Android 4.3 and which was a big problem for battery life. And also because it's smoother and faster.
I hope for you that @viktorak service mode trick will work for you if you decide to upgrade to android 4.4.4 official.
Dear Sir/Madam,
May I know how to upgrade this model SM-N920S to 6.0.1? May I know why it still 5.1.1 no matter how many times I press software update?
Any rom that can be installed in this model?
thanks
new too
edwardsiow said:
Dear Sir/Madam,
May I know how to upgrade this model SM-N920S to 6.0.1? May I know why it still 5.1.1 no matter how many times I press software update?
Any rom that can be installed in this model?
thanks
Click to expand...
Click to collapse
Hi I'm quite new too in the note 5 section and just got a used mint one because my N6 broke down.
Anyways, you can just do an odin flash for your said model (+ if it's a carrier model, be sure to check too).
If you want a custom rom, you just too just flash TWRP on top of you current rom then flash what ever custom rom you want. I'm currently on XStock V2 going as a daily driver
any have a firmware SM-N920S for delete account samsung note 5
please share link or firmware
Here is the official 7.0 firmware for the N920S.
https://www.sammobile.com/firmwares/galaxy-note5/SM-N920S/
Flash with Odin in download mode.
Just get it downloaded for now. I/someone can elaborate on the instructions once you've acquired the rom. The download time is quite long.
Hello everybody
i bought a gw3 on amazon but it went from east europe. now i want to change csc, but where can i find an update combination file for GW3 SM-R850? or can i use the old combination file with the new firmaware?
Warning!
Old files could be obsolete because can brick SM-R850.
Try to find latest Combination Firmware AND Stock Firmware.
Best Regards
i didn't find it anywhere
Can you check Firmware from your SM-R850?
To identify which Firmware Version is on Device...
Easiest IMHO is to enter this Code:
*#1234#
As example...
http://fota-cloud-dn.ospserver.net/firmware/ITV/SM-R850/version.xml
R850XXU1BUD1/R850OXA1BUD1
BUD1 seems latest for ITV...
Notify Update
doc.samsungmobile.com
Best Regards
csc: R850OXA1BUA8
Thank you so much for your help
Maybe somebody could help with these files:
COMBINATION-FT55_R850XXU1AUA3.tar.md5
and
R850XXU1BUAB
Maybe B is wrong maybe 8
R850XXU1BUA8
If somebody can share please.
Thanx in advance.
Best Regards
@adfree I am a new member in this Forum. can you please help me to find out a combination file and stock firmware to change region in my Galaxy Watch 3 RM-845F it is now on
AP:R845FXXU1BTH4
CP:R845FXXU1BTH4
CSC:R845FOLB1BTH4
SOFTWARE VERSION R845FXXU1BTH4
Tizen VERSION 5.5.0.1
I am from India and I don't receive any OTA updates.
changed the region from India to Australia by the person who gave me the watch but now I am stuck I have extensively gone through the forums and the net but couldn't find any way to change the region back to India. Any help or leads from your side is much appreciated.
Regards,
adfree said:
Can you check Firmware from your SM-R850?
To identify which Firmware Version is on Device...
Easiest IMHO is to enter this Code:
*#1234#
As example...
http://fota-cloud-dn.ospserver.net/firmware/ITV/SM-R850/version.xml
R850XXU1BUD1/R850OXA1BUD1
BUD1 seems latest for ITV...
Notify Update
doc.samsungmobile.com
Best Regards
Click to expand...
Click to collapse
Hi,
I'm also looking for R850XXU1BUD1/R850OXA1BUD1.
I'm not quite sure what your example mean, the website doesn't seem to work: http://fota-cloud-dn.ospserver.net/firmware/ITV/SM-R850/version.xml
Mine is currently
AP : R850XXU1ATF3
CP : No Phone
CSC: R850OXA1ATF3
Region : XSP
Why do I lose the ability to auto update?
Thanks,