Huawei P9 stuck on Huawei Boot Screen (Rooted and Bootloaded) Please help. - Huawei P9 Questions & Answers

Hi,
Completely new here - but been trying to find some assistance.
I got the Huawei P9 over the weekend and decided to Root it, so that I can play around with it a bit more and its been working fine for a few days. I used the instructions over at stechguide on how to unlock bootloader, and how to root and install TWRP recovery (cant post direct links due to first post).
Today I rebooted my phone, and it now wont power back up - it just sits on the Huawei Logo screen.
I am quite clueless when it comes to this, so I have been looking at trying to put a Stock ROM back onto the phone (P9 EVA-L09 B136), but nothing seems to be working as I am doing it wrong.
Can anybody please help me?

SpongeN0b said:
Hi,
Completely new here - but been trying to find some assistance.
I got the Huawei P9 over the weekend and decided to Root it, so that I can play around with it a bit more and its been working fine for a few days. I used the instructions over at stechguide on how to unlock bootloader, and how to root and install TWRP recovery (cant post direct links due to first post).
Today I rebooted my phone, and it now wont power back up - it just sits on the Huawei Logo screen.
I am quite clueless when it comes to this, so I have been looking at trying to put a Stock ROM back onto the phone (P9 EVA-L09 B136), but nothing seems to be working as I am doing it wrong.
Can anybody please help me?
Click to expand...
Click to collapse
first go to recovery menu

foxy4270 said:
first go to recovery menu
Click to expand...
Click to collapse
TWRP Recovery screen? Because I have tried the Huawei eRecovery and it connects to my WiFi, then I get error "Getting package info failed".

SpongeN0b said:
TWRP Recovery screen? Because I have tried the Huawei eRecovery and it connects to my WiFi, then I get error "Getting package info failed".
Click to expand...
Click to collapse
go to TWRP recovery....then reboot to bootloader

But the full Rom (~1,5gb) on the SD card in folder dload (root directory). You need eRecovery for the following, turn phone off, push all tree buttons at the same time, hold it until update comes on the screen. It should flash the Rom! If your phone shows after that still the unlocked notification, do all these steps one more time.
Gesendet von meinem EVA-L19 mit Tapatalk

Related

Huawei P9 EVA-L09 stuck in boot screen

Hey all, i'm posting to ask you some help !
I wanted to update my P9 to EMUI 5 B360 final and stable version i found in internet, then i create the dload file in sd card and tryed to install it, sadly installation didnt complete it failed at 5%.
After that my phone didnt work so i wanted to reinstall b 186 on it. I first install the intermediate package from the huawei site and then i wanted to install the b186, but installation failed too and now when my p9 is stuck at boot logo when i turn it on. Recovery mode (by puting volum + and power button) does not work, i can only go to fastboot mode.
Edit: my phone is not rooted
Please if someone have a solution to that help me !
Same Problem here!
Firop said:
Hey all, i'm posting to ask you some help !
I wanted to update my P9 to EMUI 5 B360 final and stable version i found in internet, then i create the dload file in sd card and tryed to install it, sadly installation didnt complete it failed at 5%.
After that my phone didnt work so i wanted to reinstall b 186 on it. I first install the intermediate package from the huawei site and then i wanted to install the b186, but installation failed too and now when my p9 is stuck at boot logo when i turn it on. Recovery mode (by puting volum + and power button) does not work, i can only go to fastboot mode.
Edit: my phone is not rooted
Please if someone have a solution to that help me !
Click to expand...
Click to collapse
I also got that issue The official update.app process stopped near 5%, the phone rebootet and now.... I can only see the bootlogo and can boot into Fastboot. Nothing else :/
sooo pleeeaase help if someone has an idea!!!
Same issue here (
Can we flash it via Fastboot maybe?

Looks like a f'ed up, need some help

Hi all,
I was trying to root my mate s following the "How to root properly Huawei Mate S in last version B361" guide. Not sure what went wrong, but after he talks about supersu I reboot like he does cause I had already downloaded it on the phone and it gets stuck in loading screen.
Stuff I tried:
- power+volume up and got into twrp recovery mode, wiped the phone, reboot
- still stuck
- tried to get to recovery again, now i can only get into huawei erecovery
- only option I have are: reboot (get stuck in loading screen), shutdown (shuts down) and donwload new version and recovery.
- I tried the last one, but I get "getting package info failed)
I don't know what to do anymore
The same was happened with me trying to root. So I copied the firmware b380 (dload file) to sd card and keept trying pressing volup+voldown+power until the the phone responded and start updating and now its ok and unbriked. Just keep trying
Thanks that worked!

Bricked, or Stuck ... after going from mOOnlight rom to Stock

Hello guys, I have a big Problem right now.
After finally getting TWRP working on my phone I installed the mOOnlight Rom on there. It was ok, but I had some issues with some settings that I could'nt access.
What I did after that was flashing the Rollback package from Huawei.com and after that the 4.1.1 package that you needed to flash after that. But now I got stuck an a black screen and there is nothing that I can do to fix it.
It always goes on and after the huawei logo it stays black. I can get to safe mode, where i can whipe stuff but that does nothing.
Has anybody help for me? It's so frustrating....
EDIT: I#m in TWRP now, but it can't mount anything.

Huawie P9 will not take any firmware\Bootloop

Hi
I have been searching through different posts and trying different methods of flashing the correct firmware but nothing works.
Here is what happend.
I have a huawei P9 on Vodaphone in the UK
I unlocked the bootloader and rooted but i could not update to android 7 i just kept getting errors and it was a nightmare to get back to anything below that,
I finally did get back to 6 and all worked fine but it was eva-l09c900 that displayed on my phone and still not updated but i was just happy it was working again so i left it.
I decided a few days ago that i need to update but the same thing happened i got an error and now i am stuck in a boot loop.
I first tried the dload method from a sd card but all firmware i tried failed at 4 or 5%
I then tried to fastboot flash boot.img recovery,img and system.img but still in boot loop
After attempting that i no longer have touch capability
I installed twrp recovery but cant do a thing because touch no longer works
Today i have been trying the huawei update tool method through hisuite
That works right upto about 80% then hisuite crashes just as my phone gives an error.
I am now out of idea's
Please any help would be greatly appreciated
Even knowing what firmware i should be on a huawei P9 from the uk on vodaphone might help because im sure its not c900 but that what i had before i tried to update.
I have tried so many different versions now i dont know anymore .
Thank you
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
xtcislove said:
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
Click to expand...
Click to collapse
Hi
Thanks but i cannot flash that firmware it just fails at 5% so i used dc pheonix to flash it
it said flashed successfully but still wont boot it just boots to (your device has been unlocked and cant be trusted) then reboots again
is there anything else i can try from here
jy0un9 said:
Hi
Thanks but i cannot flash that firmware it just fails at 5% so i used dc pheonix to flash it
it said flashed successfully but still wont boot it just boots to (your device has been unlocked and cant be trusted) then reboots again
is there anything else i can try from here
Click to expand...
Click to collapse
Just the same as mine,my phone version is EVA-TL00(chinese cmcc version),and my current number is EVA-TL00C01B182SP01. Now I can't dload any firmware(press volume up+volume down+powerbutton or dail *#*#2846579#*#*),but when I enter ecovery mode,it can check the new version EVA-TL001B198,when connect the wifi downloading ,it update 4%,finally failed.Now I cannot find what it encounter?It is always in the TL00C01B182SP01 version.Can anybody help me solving this problem,thx.
I finally did it i just kept flashing different firmware in dc pheonix until one worked
Thanks though

Help me unbrick my soft-bricked phone, please!

I bought a rooted Huawei P10, and when I tried to restore it to stock firmware, I accidentally soft-bricked it.
I can still turn it on, but it is stuck in a boot loop. I can also put it into fastboot/rescue mode and Huawei eRecovery.
I have tried flashing stock firmware through the micro sd card, but with no succes.
The installation always stops at 5%.
I have tried many different guides, and some have suggested I have the wrong firmware.
I have little to no experience in this field, and therefore I need every single bit of help I can get.
​
INFO:
Model: Huawei P10 VTR-L29
Use firmwarefinder for pc and push an update.
Follow the tutorial that the program will say...and dont forget to push the corect version, try the one that you allready have

Categories

Resources