Hi all,
I rooted my phone and unclocked bootloader.
My rom is a stock rom.
I managed to install CWM recovery using lg-optimus-4xhd-recovery-v1.0.apk but something happened.
I rebooted my phone in recovery mode and it is always locked to LG logo.
Pressing Volume up and power I can see normal android system recovery, wiping cache and factory reset don't work.
I haven't usb debugging enable so my computer can't see the phone connected with usb cable, and it's impossible for me flashing the phone with kdz rom methods.
What can I do?
Thx in advance for your answers
No one can help me?
Flashing with kdz results in "phone was not found", is there a way to resolve? I've tried with ubuntu, OS (adb) only see my phone if usb debugging is enabled and it isn't, and with a laptop running win8, installing LG drivers and so on, nothing works.
This is salvagable
If you can get the stock recovery mode, all is not lost, all of the important bits are still functioning.
Power down. Hold VolDn and insert the USB cable. If you get the Software Update screen with a green icon you CAN recover the phone. It may require a battle with Windows to get it to play nice, Windows and USB is always a hit or miss affair; but the phone is ok if that screen appears. Do not use the VolUP + Power LG Recovery mode, there isn't a known tool for that in the wild.
I don't normally run Windows and the couple of times I have booted it to do this it required some hassle and usually skipping the nice way since I had never installed the bundled LG Desktop stuff before things went wrong. So just do what I did, pick the Emergency mode that requires inputting the IMEI instead of letting it detect your phone and then let it fix things for you.
jmorris_42 said:
If you can get the stock recovery mode, all is not lost, all of the important bits are still functioning.
Power down. Hold VolDn and insert the USB cable. If you get the Software Update screen with a green icon you CAN recover the phone. It may require a battle with Windows to get it to play nice, Windows and USB is always a hit or miss affair; but the phone is ok if that screen appears. Do not use the VolUP + Power LG Recovery mode, there isn't a known tool for that in the wild.
I don't normally run Windows and the couple of times I have booted it to do this it required some hassle and usually skipping the nice way since I had never installed the bundled LG Desktop stuff before things went wrong. So just do what I did, pick the Emergency mode that requires inputting the IMEI instead of letting it detect your phone and then let it fix things for you.
Click to expand...
Click to collapse
Many thanks for your answer, I resolved the problem late at night, yes, after a hard battle with windows.
I installed windows 7 32 bit, I tried a lot of Lg drivers, 3.8.1 maybe the best, after inserting the USB cable with SW Update screen some LG peripherals were recognized but the result in KDZ_FW_UPD was always "phone was not found", then I tried connecting USB cable with the Phone in Android recovery mode ( power & Vol up), and OS added a couple more peripherals, and attempting again with SW Upgrade mode worked.
I did the following things
1. Unlocked the bootloader.
2. Flashed twrp 3.0.2 with fastboot.
3. Flashed a rom cm14 unofficial.
4. Phone stuck into Bootloop.
5. Got update.app file from stock rom.
6. Used HUAWEI update extractor tool and made a flashable zip file for 5.1 Android version.
7. Flashed this file as a rom through twrp.
8. Now phone does not switch on.
9. Not even in bootloader, recovery nothing.
10. Screen completely black, nothing.
11. When connected to PC via USB, qsmusb_hub driver is asked by PC.
12. Adb/fastboot not detecting it.
13. Pressing any combination of volume and power buttons, changes the USB device connection (PC makes sound of USB connection and removal but nothing happens.
The led indicator starts blink after some time, it too goes off if I press volume + the power button. After sometime the indicator starts blinking rapidly.
If anyone can help me how to install stock recovery ir to go to bootloader anyway, will be very grateful
Name = Neeraj
Whatsapp= (0091) 8700748606
Mobile=(0091) 9212281840
Mail= [email protected]
Country= India.
neerajksw said:
I did the following things
1. Unlocked the bootloader.
2. Flashed twrp 3.0.2 with fastboot.
3. Flashed a rom cm14 unofficial.
4. Phone stuck into Bollywood.
5. Got update.app file from stock rom.
6. Used HUAWEI update extractor tool and made a flashable zip file for 5.1 Android version.
7. Flashed this file as a rom through twrp.
8. Now phone does not switch on.
9. Not even in bootloader, recovery nothing.
10. Screen completely black, nothing.
11. When connected to PC via USB, qsmusb_hub driver is asked by PC.
12. Adb/fastboot not detecting it.
13. Pressing any combination of volume and power buttons, changes the USB device connection (PC makes sound of USB connection and removal but nothing happens.
If anyone can help me how to install stock recovery ir to go to bootloader anyway, will be very grateful.
Click to expand...
Click to collapse
When you connect it to a charger while it is off, does the screen show the filling battery animation?
No, it does not show battery filling.
Only led starts blinking blue.
neerajksw said:
No, it does not show battery filling.
Only led starts blinking blue.
Click to expand...
Click to collapse
You need to take it to a service center.
When a phone is plugged in and it doesn't show the charging interface, that's a bad sign.
u need drivers and blank_flash file to get it back to life . that case service only these file are not available !
i did something Stupid and my Z2 Pro dead
there is no fast-boot and no recovery .. only black screen and when i press power button there is a short and long vibration just that and the LED there is flash yellow for 0.1 second
aljthab said:
i did something Stupid and my Z2 Pro dead
there is no fast-boot and no recovery .. only black screen and when i press power button there is a short and long vibration just that and the LED there is flash yellow for 0.1 second[/QUOTE try connecting it to the PC, if it doesn't show anything on PC then just hand it over to the lenovo service center and blame it on the device that it stopped booting :silly:. I thought i had bricked my device but they did something and gave it to me in 3 to 4 days and that was done under the warranty no extra charge and don't confess that I had rooted ur device , If u tell them that they will try to extort money from u :crying:
Click to expand...
Click to collapse
aljthab said:
i did something Stupid and my Z2 Pro dead
e LED there is flash yellow for 0.1 second
Click to expand...
Click to collapse
I have exactly the same, what to do? I installed the dev 44, the rate of established but after 15 minutes, logo is stalled, not waiting until the end of excess freewheeling dev 300, it is not fully established and bug crawled, I rebooted the machine and an endless vibration with green LED :crying:
1 Charging can be a little warm
2. can not be detected pc
3. can not access the fastboot mode
4. when charging, the notification light dies
5. deep flash cable has not helped
sorry my bad english
kerei said:
I have exactly the same, what to do? I installed the dev 44, the rate of established but after 15 minutes, logo is stalled, not waiting until the end of excess freewheeling dev 300, it is not fully established and bug crawled, I rebooted the machine and an endless vibration with green LED :crying:
1 Charging can be a little warm
2. can not be detected pc
3. can not access the fastboot mode
4. when charging, the notification light dies
5. deep flash cable has not helped
sorry my bad english
Click to expand...
Click to collapse
Refer to this http://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ and this http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-z2131-only.104/
same issue with zuk z2
adriano1593 said:
Refer to this http://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ and this http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-z2131-only.104/
Click to expand...
Click to collapse
Hello there... Any solution you found? I am stuck with my zuk z2 in same situation ?? any help ?
I have a similar problem.
What caused the black screen? -
History:
I booted to test mode at 2.5.033 ST, the phone got stucked at this menue there was no way to get out. TWRP Restore to Nandroid bougt only black screen after 2nd vibration and ZUK logo.
I fixed the Test mode bug, by flashing the ZUI 1.9.104 ST Stock ROM via QPST.
After the phone was "repaired" I unlocked the bootloader, installed TWRP, made a nandroid backup of fully stock ROM and restored a nandroid backup from before the test mode problem.
The nandroid restore was successful, I rebooted the phone and it was "dead". Black screen, only rebooting (perioldy vibrating) there was no end, until the battery was empty.
I got no luck to reach any mode with tricky button pressing (vol+ pwr; vol- pwr; vol+ vol- pwr; usb in vol-) nor Windows detecting the phone. That's why I decided to remove the back glass cover, to got access to the battery.
Now I'm able to get the phone detected by my PC.
What I did: disconnect the battery, connect the phone to my computer, pressed the vol- button and connect the battery.
This made my PC able to detect the phone, but no I have an other problem. Windows only detects the phone as "unknown usb device (device descriptor request failed)". I don't know any way to install the driver....
Maybe anyone is able to help me or has any tip?
Thanks!
Cheers,
m_atze
m_atze said:
I have a similar problem.
What caused the black screen? -
History:
I booted to test mode at 2.5.033 ST, the phone got stucked at this menue there was no way to get out. TWRP Restore to Nandroid bougt only black screen after 2nd vibration and ZUK logo.
I fixed the Test mode bug, by flashing the ZUI 1.9.104 ST Stock ROM via QPST.
After the phone was "repaired" I unlocked the bootloader, installed TWRP, made a nandroid backup of fully stock ROM and restored a nandroid backup from before the test mode problem.
The nandroid restore was successful, I rebooted the phone and it was "dead". Black screen, only rebooting (perioldy vibrating) there was no end, until the battery was empty.
I got no luck to reach any mode with tricky button pressing (vol+ pwr; vol- pwr; vol+ vol- pwr; usb in vol-) nor Windows detecting the phone. That's why I decided to remove the back glass cover, to got access to the battery.
Now I'm able to get the phone detected by my PC.
What I did: disconnect the battery, connect the phone to my computer, pressed the vol- button and connect the battery.
This made my PC able to detect the phone, but no I have an other problem. Windows only detects the phone as "unknown usb device (device descriptor request failed)". I don't know any way to install the driver....
Maybe anyone is able to help me or has any tip?
Thanks!
Cheers,
m_atze
Click to expand...
Click to collapse
What id shown in unknown device.
Like ven_9102&dev_1234
Maybe with editing quallcom drivers for your device id, you can still install it.
and if luck qpst can recognize it as qualcomm debug mod
Sent from my ZUK Z2121 using Tapatalk
eryenakgun said:
What id shown in unknown device.
Like ven_9102&dev_1234
Maybe with editing quallcom drivers for your device id, you can still install it.
and if luck qpst can recognize it as qualcomm debug mod
Sent from my ZUK Z2121 using Tapatalk
Click to expand...
Click to collapse
Hi,
Thanks for your quick response.
The Hardware ID: USB\DEVICE_DESCRIPTOR_FAILURE
"Error Message": This device has been stopped because it has reported errors. (Code 43)
An error occurred while requesting the USB device descriptor.
m_atze said:
I have a similar problem.
What caused the black screen? -
History:
I booted to test mode at 2.5.033 ST, the phone got stucked at this menue there was no way to get out. TWRP Restore to Nandroid bougt only black screen after 2nd vibration and ZUK logo.
I fixed the Test mode bug, by flashing the ZUI 1.9.104 ST Stock ROM via QPST.
After the phone was "repaired" I unlocked the bootloader, installed TWRP, made a nandroid backup of fully stock ROM and restored a nandroid backup from before the test mode problem.
The nandroid restore was successful, I rebooted the phone and it was "dead". Black screen, only rebooting (perioldy vibrating) there was no end, until the battery was empty.
I got no luck to reach any mode with tricky button pressing (vol+ pwr; vol- pwr; vol+ vol- pwr; usb in vol-) nor Windows detecting the phone. That's why I decided to remove the back glass cover, to got access to the battery.
Now I'm able to get the phone detected by my PC.
What I did: disconnect the battery, connect the phone to my computer, pressed the vol- button and connect the battery.
This made my PC able to detect the phone, but no I have an other problem. Windows only detects the phone as "unknown usb device (device descriptor request failed)". I don't know any way to install the driver....
Maybe anyone is able to help me or has any tip?
Thanks!
Cheers,
m_atze
Click to expand...
Click to collapse
Alright bro, there is one method you can try.
http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-pro-z2121-only.57/
I assume your phone is a brick now. The only method you can use is the 9008 unbrick mode. (AKA QBST)
There are a few things you need to prepare before you save ur phone. U need to download the require application that the website provided above, after you set everything up,
make sure you download the latest 2.5 QBST rom,
http://bbs.lenovomobile.cn/z2pro/t554654/
Because ur phone wont be able to enter 9008 through software, thus u need to do the following.
1. Load the content XML fille,
2.Turn off your phone. After it's fully shutdown
3. press and hold the volume up button for 3 seconds
4. press power button while hold the volume up (press it for 0.5second and keep holding it)
5. after 0.5 seconds, plug in the usb right away
6. the QFIL tool should appear the Qualcomm usb QD loader
7. the download button should turn blue
8. flash it and wait for reboot
OtakuLi said:
Alright bro, there is one method you can try.
http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-pro-z2121-only.57/
I assume your phone is a brick now. The only method you can use is the 9008 unbrick mode. (AKA QBST)
There are a few things you need to prepare before you save ur phone. U need to download the require application that the website provided above, after you set everything up,
make sure you download the latest 2.5 QBST rom,
http://bbs.lenovomobile.cn/z2pro/t554654/
Because ur phone wont be able to enter 9008 through software, thus u need to do the following.
1. Load the content XML fille,
2.Turn off your phone. After it's fully shutdown
3. press and hold the volume up button for 3 seconds
4. press power button while hold the volume up (press it for 0.5second and keep holding it)
5. after 0.5 seconds, plug in the usb right away
6. the QFIL tool should appear the Qualcomm usb QD loader
7. the download button should turn blue
8. flash it and wait for reboot
Click to expand...
Click to collapse
Thanks for your tip.
I followed your described procedure, but the phone will not be recocnized by the PC.
1st: I loaded QFIL XML file. (By the way this tut is made by me)
2nd: I disconnected the battery (The phone can't be turned off normally!)
3rd, 4th, 5th
6th: nothing happend!
7th: "-"
8th: "-"
The only way the phone will detected by the PC:
1st: disconnect battery
2nd: plug in USB (PC and Phone)
3rd: press VOL+ or VOL- or PWR button (doesn't matter which one)
4th: connect battery
5th: detected as "unknown usb device (device descriptor request failed)"
m_atze said:
Thanks for your tip.
I followed your described procedure, but the phone will not be recocnized by the PC.
1st: I loaded QFIL XML file. (By the way this tut is made by me)
2nd: I disconnected the battery (The phone can't be turned off normally!)
3rd, 4th, 5th
6th: nothing happend!
7th: "-"
8th: "-"
The only way the phone will detected by the PC:
1st: disconnect battery
2nd: plug in USB (PC and Phone)
3rd: press VOL+ or VOL- or PWR button (doesn't matter which one)
4th: connect battery
5th: detected as "unknown usb device (device descriptor request failed)"
Click to expand...
Click to collapse
Make sure you have to plug in the usb right away as soon as you u press power, and keep holding them
OtakuLi said:
Make sure you have to plug in the usb right away as soon as you u press power, and keep holding them
Click to expand...
Click to collapse
Yes, I did exactly you described. Sorry but this isn't working.
I don't know what I should do. Even a repair shop couldn't fix it.
Maybe I need to do this:
http://bbs.lenovomobile.cn/z2/t121791/?highlight=900e
But I don't want to destroy my PC (3000 bugs)
m_atze said:
Yes, I did exactly you described. Sorry but this isn't working.
I don't know what I should do. Even a repair shop couldn't fix it.
Maybe I need to do this:
http://bbs.lenovomobile.cn/z2/t121791/?highlight=900e
But I won't destroy my PC (3000 bugs)
Click to expand...
Click to collapse
oh well, good luck
OtakuLi said:
oh well, good luck
Click to expand...
Click to collapse
I will report the result.
OK. I made the deepflash cable.
After using it there is no difference between pressing one of the button combinations I recently mentioned (VOL+ or VOL- or PWR).
The phone will be detected as Unknown device. After intalling my modified driver to match the unknown ID, QFIL don't detect the COM Port.
Hello had the same problem, only with the difference that my battery was not completely discharged.
What has helped:
1 Start QFIL Tool
2 Press the volume +
3 Connect the original cable to the PC
4 QFIL Tool recognized the phone and I could play an original Rome.
Mfg
Ps. Is now the battery cover (glass) broken?
No, I used a hairdryer, a razorblade, plastic tool and a suction cup to lift the backcover glass.
The glass is fully intact no damages.
You have good nerves. I would not have expected that.
But in the end, it does not matter if it does not start anymore.
Thank you again for your great instructions for playing and rooting the mobile phone.
I hope you get your phone back.
Mfg
Good and bad news
The guy unbricked the phone successfully, I received it today.
Now I have an other problem:
The phone is very very slow and laggy now.
The problem occurs everywere, Recovery, boot (the bootlogo laggs), booted System, also the test mode laggs now
Furthermore the sceen flickers sometimes and at the right side the sceen is mirrored sometimes.
Did anyone has an idea?
What I did today:
reflash through qfil
1.9.104_ST
2.3.044_ST
ZUI_2.5.335_ST
Hi m_atze, I am exactly in the same situation as You. After using deep flash cable method, I got "unknown usb device (device descriptor request failed)". Could You tell me what was the solution to unbrick the phone?
Well, I'd like to say that I know little English. And I'm using google translator.
The problem is the following
I have a Galaxy S3 LTE I9305T. It was working perfectly. Then I installed a custom rom. I installed a custom recovery then went to the custom rom, the device rebooted and worked normally. The problem came next.
I decided to test some adb commands. I installed all the drivers on the computer. The cell was recognized on the computer as an ADB device. And then I went to do the test, with the command adb reboot download ... then the device went into download mode ... great worked ... it goes out that way ... then I tried the recovery mode, to see if the device I was directed to the personalized recovery of the cell phone ... that's when the problem happened ...
After the adb reboot bootloader command ... the device did not work anymore. When and connected it is only on the screen Samsung Galaxy SIII GT-I9305T, and it is in infinite loop until discharge the battery.
Already tried to get into downloader mode. Power button + homer + volume button down and nothing happens besides continuing on the screen. Trying the keys to recovery mode same problem ...
With the cell phone turned off when I plug in the charger, does not appear charged signal, connects directly to the SAMSUNG GALAXY boot screen, when USB cable on the pc, do not hear the connected noise, just the same problem the screen on and off written Galaxy SIII...
Odin does not work because the cell phone is not recognized when connected in the computer, nor in the charger, but the screen turns on at boot. All drivers are installed
@magogm
That doesn't sound promising....
Firstly, you wanted to reboot to recovery, why didn't you use "adb reboot recovery"? AFAIK, and I might be wrong, but I don't think "adb reboot bootloader" works on Samsung phones anyway. I don't think it should have broken anything though.
If you can't enter system, recovery, or download mode, the next thing I would try is a usb jig to try to force the phone into download mode. If that works, try flashing the stock rom for the region from where the phone is from originally. That is the only thing I can think of that might work considering the device is not recognized by your pc in any state.....
You can get usb jigs cheap on ebay or amazon or elsewhere and instructions if you search. Good luck