I've messed up with EFIESP Partition and i'm unable to flash my Device.
I've Lumia 520.
Replaced with dev ROM,
DisableWriteProtect.test
ffuloader.efi
mmosloader.efi
mobilestartup.efi
resetphone.efi
sigcheck.efi
and its packages.
Only efisimpleio.efi is original.
Stuck at Red Screen. (.FFU is not signed for this device or Invalid signature)
Stuck at "NOKIA BOOTMGR"
djamol said:
I've messed up with EFIESP Partition and i'm unable to flash my Device.
I've Lumia 520.
Replaced with dev ROM,
DisableWriteProtect.test
ffuloader.efi
mmosloader.efi
mobilestartup.efi
resetphone.efi
sigcheck.efi
and its packages.
Only efisimpleio.efi is original.
Stuck at Red Screen. (.FFU is not signed for this device or Invalid signature)
Stuck at "NOKIA BOOTMGR"
Click to expand...
Click to collapse
seems you change anything and it's a djamol lumia 520 not nokia one so create your own signed rom
I think you have to flash it over JTag or ATF
ngame said:
seems you change anything and it's a djamol lumia 520 not nokia one so create your own signed rom
I think you have to flash it over JTag or ATF
Click to expand...
Click to collapse
So there is no any way to recover partition ?
then JTag is a last option :/
djamol said:
So there is no any way to recover partition ?
then JTag is a last option :/
Click to expand...
Click to collapse
I don't know if there's any option to do but I know JTAG 100% works .
ngame said:
I don't know if there's any option to do but I know JTAG 100% works .
Click to expand...
Click to collapse
If I could solved this error, then you can also unlock your Lumia 920
Code:
thor2 -mode uefiflash -partitionname efiesp -partitionimagefile "efiesp.bin" -restorepartition
Code:
C:\Program Files\Microsoft Care Suite\Windows Phone Recovery Tool>thor2 -mode uefiflash -partitionname efiesp -partit
imagefile "efiesp.bin" -restorepartition
THOR2 1.8.2.15
Built for Windows @ 13:33:08 Mar 11 2015
Thor2 is running on Windows of version 6.2
thor2 -mode uefiflash -partitionname efiesp -partitionimagefile efiesp.bin -restorepartition
Process started Tue May 05 09:34:18 2015
Logging to file C:\Users\Saurabh\AppData\Local\Temp\thor2_win_20150505093418_ThreadId-960.log
Debugging enabled for partitionimageflash
Initiating flash of partition image operations
WinUSB in use.
Using restoring of partition backup method
isDeviceInNcsdMode
isDeviceInNcsdMode is false
Detecting UEFI responder
HELLO success
Lumia Flash detected
Protocol version 1.15 Implementation version 1.28
Disable timeouts
Get flashing parameters
Lumia Flash detected
Protocol version 1.15 Implementation version 1.28
Size of one transfer is 2363392
Size of buffer is 2359296
Number of eMMC sectors: 15155200
Platform ID of device: Nokia.MSM8227.P6036.1.2
Async protocol version: 01
Security info:
Platform secure boot enabled
Secure FFU enabled
JTAG eFuse blown
RDC not found
Authentication not done
UEFI secure boot enabled
SHK enabled
Device supports FFU protocols: 0019
Cannot flash partition image. Write the RDC into the device or use open/RnD HW & SW
Operation took about 0.00 seconds.
THOR2_ERROR_UEFI_RDC_OR_AUTHENTICATION_REQUIRED
THOR2 1.8.2.15 exited with error code 84214 (0x148F6)
djamol said:
If I could solved this error, then you can also unlock your Lumia 920
Code:
thor2 -mode uefiflash -partitionname efiesp -partitionimagefile "efiesp.bin" -restorepartition
Code:
C:\Program Files\Microsoft Care Suite\Windows Phone Recovery Tool>thor2 -mode uefiflash -partitionname efiesp -partit
imagefile "efiesp.bin" -restorepartition
THOR2 1.8.2.15
Built for Windows @ 13:33:08 Mar 11 2015
Thor2 is running on Windows of version 6.2
thor2 -mode uefiflash -partitionname efiesp -partitionimagefile efiesp.bin -restorepartition
Process started Tue May 05 09:34:18 2015
Logging to file C:\Users\Saurabh\AppData\Local\Temp\thor2_win_20150505093418_ThreadId-960.log
Debugging enabled for partitionimageflash
Initiating flash of partition image operations
WinUSB in use.
Using restoring of partition backup method
isDeviceInNcsdMode
isDeviceInNcsdMode is false
Detecting UEFI responder
HELLO success
Lumia Flash detected
Protocol version 1.15 Implementation version 1.28
Disable timeouts
Get flashing parameters
Lumia Flash detected
Protocol version 1.15 Implementation version 1.28
Size of one transfer is 2363392
Size of buffer is 2359296
Number of eMMC sectors: 15155200
Platform ID of device: Nokia.MSM8227.P6036.1.2
Async protocol version: 01
Security info:
Platform secure boot enabled
Secure FFU enabled
JTAG eFuse blown
RDC not found
Authentication not done
UEFI secure boot enabled
SHK enabled
Device supports FFU protocols: 0019
Cannot flash partition image. Write the RDC into the device or use open/RnD HW & SW
Operation took about 0.00 seconds.
THOR2_ERROR_UEFI_RDC_OR_AUTHENTICATION_REQUIRED
THOR2 1.8.2.15 exited with error code 84214 (0x148F6)
Click to expand...
Click to collapse
Got it
I think get what did you do and will search for your error to solve it together and I'll send you a PM about your way to work on it with you
don't leave you alone :highfive:
ngame said:
Got it
I think get what did you do and will search for your error to solve it together and I'll send you a PM about your way to work on it with you
don't leave you alone :highfive:
Click to expand...
Click to collapse
I'm glad to heard that, thanks...
Thinking same procedure with JTag Approach ?
May be possible !!!!
Ohh can easily modify MainOS partition or can dump sectors...
Something new? I´m stuck now on red flash screen, after erased Data partition. Still have id platform changed ((
djamol said:
If I could solved this error, then you can also unlock your Lumia 920
Code:
thor2 -mode uefiflash -partitionname efiesp -partitionimagefile "efiesp.bin" -restorepartition
Code:
C:\Program Files\Microsoft Care Suite\Windows Phone Recovery Tool>thor2 -mode uefiflash -partitionname efiesp -partit
imagefile "efiesp.bin" -restorepartition
THOR2 1.8.2.15
Built for Windows @ 13:33:08 Mar 11 2015
Thor2 is running on Windows of version 6.2
thor2 -mode uefiflash -partitionname efiesp -partitionimagefile efiesp.bin -restorepartition
Process started Tue May 05 09:34:18 2015
Logging to file C:\Users\Saurabh\AppData\Local\Temp\thor2_win_20150505093418_ThreadId-960.log
Debugging enabled for partitionimageflash
Initiating flash of partition image operations
WinUSB in use.
Using restoring of partition backup method
isDeviceInNcsdMode
isDeviceInNcsdMode is false
Detecting UEFI responder
HELLO success
Lumia Flash detected
Protocol version 1.15 Implementation version 1.28
Disable timeouts
Get flashing parameters
Lumia Flash detected
Protocol version 1.15 Implementation version 1.28
Size of one transfer is 2363392
Size of buffer is 2359296
Number of eMMC sectors: 15155200
Platform ID of device: Nokia.MSM8227.P6036.1.2
Async protocol version: 01
Security info:
Platform secure boot enabled
Secure FFU enabled
JTAG eFuse blown
RDC not found
Authentication not done
UEFI secure boot enabled
SHK enabled
Device supports FFU protocols: 0019
Cannot flash partition image. Write the RDC into the device or use open/RnD HW & SW
Operation took about 0.00 seconds.
THOR2_ERROR_UEFI_RDC_OR_AUTHENTICATION_REQUIRED
THOR2 1.8.2.15 exited with error code 84214 (0x148F6)
Click to expand...
Click to collapse
Bootloader needs to be unlocked.
augustinionut said:
Something new? I´m stuck now on red flash screen, after erased Data partition. Still have id platform changed ((
Click to expand...
Click to collapse
thor2 -mode vpl -vplfile “path” -reboot
Thanks, but since then i got new motherboard from microsoft
But maube you can tell me how to repair no boot option error, ocurred after i hard reset my lumia 530, on wm10, with reset protection activated..
Help!!
Looks like the WPRT has corrupted my Platform ID. It is reported by Thor2 as:
Nokia MSM8974..2..2.
When I check the FFU file of the recovery download:
Nokia.MSM8974.P6039
So, 2 questions:
1) Does anyone know how to update/modify the phones Platform ID?
2) Does anyone know where a Lumia Icon RM-927 hex file can be found?
dumper_gumper said:
Looks like the WPRT has corrupted my Platform ID. It is reported by Thor2 as:
Nokia MSM8974..2..2.
When I check the FFU file of the recovery download:
Nokia.MSM8974.P6039
So, 2 questions:
1) Does anyone know how to update/modify the phones Platform ID?
2) Does anyone know where a Lumia Icon RM-927 hex file can be found?
Click to expand...
Click to collapse
Hi, I have the exact problem did you manage to solve it?????
My phone is Lumia 1520 RM-940, and I have tried everything humanly possible to fix it but i couldn't.
The phone is bricked and no rom will ever flash on it because of the wrong platform ID error
guys if anyone has any idea how to either skip the id check or change a platform id of the rom to match the corrupted one or any other solution. then please help.
Thanks in advance
oke lol
dumper_gumper said:
Looks like the WPRT has corrupted my Platform ID. It is reported by Thor2 as:
Nokia MSM8974..2..2.
When I check the FFU file of the recovery download:
Nokia.MSM8974.P6039
So, 2 questions:
1) Does anyone know how to update/modify the phones Platform ID?
2) Does anyone know where a Lumia Icon RM-927 hex file can be found?
Click to expand...
Click to collapse
ekhader said:
Hi, I have the exact problem did you manage to solve it?????
My phone is Lumia 1520 RM-940, and I have tried everything humanly possible to fix it but i couldn't.
The phone is bricked and no rom will ever flash on it because of the wrong platform ID error
Click to expand...
Click to collapse
Are you using the updated tool and what mode is your phone in? These were downloaded directly from the WPRT which has been rebranded and updated to Windows Device Recovery Tool. If you are stuck with Emergency Download mode QHUSB_DLOAD/QHUSB_BULK then use Emergency payload cmd
Code:
thor2 -mode emergency -hexfile MPRG8974_fh.ede -edfile RM927_fh.edp
or
Code:
thor2 -mode emergency -hexfile MPRG8974_fh.ede -edfile RM940_fh.edp
Or just try using the updated tool if you haven't already
tonbonz said:
Are you using the updated tool and what mode is your phone in? These were downloaded directly from the WPRT which has been rebranded and updated to Windows Device Recovery Tool. If you are stuck with Emergency Download mode QHUSB_DLOAD/QHUSB_BULK then use Emergency payload cmd
Code:
thor2 -mode emergency -hexfile MPRG8974_fh.ede -edfile RM927_fh.edp
or
Code:
thor2 -mode emergency -hexfile MPRG8974_fh.ede -edfile RM940_fh.edp
Or just try using the updated tool if you haven't already
Click to expand...
Click to collapse
Hi,
Thanks for replying,
Yes I am using the latest tool and the device is in flash mode so its not stuck in the emergency mode.
the problem is that the recovery tool changed the device Platform ID from : Nokia.MSM8974.P6081_ATT.2.2 -----> Nokia.MSM8974..2.2
so after this change everytime i try to flash it gives the error : Platform Id Check failed, even though i am using the official and correct version of the firmware.
I have tried so many things to bypass this check but they all failed.
I wonder if the emergency flashing of the device was the cause of changing the Platform ID, I am not sure how the tool even managed to change the device Platform ID, and thinking is there anyway i can return the original platform ID ???
and by the way the attached files you posted for RM-940 they are corrupted or something winRar couldn't extract them.
-Thanks
ekhader said:
Hi,
Thanks for replying,
Yes I am using the latest tool and the device is in flash mode so its not stuck in the emergency mode.
the problem is that the recovery tool changed the device Platform ID from : Nokia.MSM8974.P6081_ATT.2.2 -----> Nokia.MSM8974..2.2
so after this change everytime i try to flash it gives the error : Platform Id Check failed, even though i am using the official and correct version of the firmware.
I have tried so many things to bypass this check but they all failed.
I wonder if the emergency flashing of the device was the cause of changing the Platform ID, I am not sure how the tool even managed to change the device Platform ID, and thinking is there anyway i can return the original platform ID ???
and by the way the attached files you posted for RM-940 they are corrupted or something winRar couldn't extract them.
-Thanks
Click to expand...
Click to collapse
Fixed corrupt zip....Thank you!!! Are you in UEFI flash mode (thunderbolt/gear symbol) or Nokia flash? What tool are you using to flash? See if thor2, WP Image Designer, or ffutool recognize the device the same. I used WPID to flash ffu downloaded from navifirm after emergency flash because Recovery Tool kept getting corrupt ffu file. If all else fails you can try hard reset using power and volume button combos.
tonbonz said:
Fixed corrupt zip....Thank you!!! Are you in UEFI flash mode (thunderbolt/gear symbol) or Nokia flash? What tool are you using to flash? See if thor2, WP Image Designer, or ffutool recognize the device the same. I used WPID to flash ffu downloaded from navifirm after emergency flash because Recovery Tool kept getting corrupt ffu file. If all else fails you can try hard reset using power and volume button combos.
Click to expand...
Click to collapse
Yes the device is in UEFI flash mode, but its completely dead bricked no screen showing no hard or soft reset, nothing showing on the device no vibration no power off/on.
the only way i communicate with the device is through the usb and thor2.exe
I tried to use the ffutool but it won't detect the phone, and neither would the WPID. even though the Nokia NSU and WDRT do detect the device. Is there a special thing should be done so the ffutool could detect the device?
I even made a modified version of the FFUClient/FFuComponent.dll to flash device and changed the usb code detection but still I couldn't get it to work.
BTW the RM-940_firehose.zip you uploaded is still corrupted, i would be happy to try it out and see if this has any effect on the Platform ID of the device.
ekhader said:
Yes the device is in UEFI flash mode, but its completely dead bricked no screen showing no hard or soft reset, nothing showing on the device no vibration no power off/on.
the only way i communicate with the device is through the usb and thor2.exe
I tried to use the ffutool but it won't detect the phone, and neither would the WPID. even though the Nokia NSU and WDRT do detect the device. Is there a special thing should be done so the ffutool could detect the device?
I even made a modified version of the FFUClient/FFuComponent.dll to flash device and changed the usb code detection but still I couldn't get it to work.
BTW the RM-940_firehose.zip you uploaded is still corrupted, i would be happy to try it out and see if this has any effect on the Platform ID of the device.
Click to expand...
Click to collapse
Hmmm... I can download and unzip it fine with 7zip. Try this... http://1drv.ms/1HjO1Gs Can you restore the PLAT.bin from dump using
Code:
thor2 -mode uefiflash -partitionname PLAT -partitionimagefile "PLAT.bin"
If it's in UEFI Flash mode both WPID and FFUTool should detect it. In device manager what is the device description and what is the Hardware ID ?
tonbonz said:
Hmmm... I can download and unzip it fine with 7zip. Try this... Can you restore the PLAT.bin from dump using
Code:
thor2 -mode uefiflash -partitionname PLAT -partitionimagefile "PLAT.bin"
If it's in UEFI Flash mode both WPID and FFUTool should detect it. In device manager what is the device description and what is the Hardware ID ?
Click to expand...
Click to collapse
Thanks i got the files now from one drive but no improvement, and Yes the device is in flash mode the USB driver is "NOKIA BOOTMGR2".
when i try to restore the PLAT.bin i get this error:
Code:
C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool>thor2 -mode uefiflash -partitionname PLAT -partitionimagefile c:\dump\PLAT.bin
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.2
thor2 -mode uefiflash -partitionname PLAT -partitionimagefile c:\dump\PLAT.bin
Process started Tue Nov 24 14:35:06 2015
Debugging enabled for partitionimageflash
Initiating flash of partition image operations
WinUSB in use.
Using programming of partition image method
isDeviceInNcsdMode
isDeviceInNcsdMode is false
Detecting UEFI responder
HELLO success
Lumia Flash detected
Protocol version 2.29 Implementation version 2.52
Disable timeouts
Get flashing parameters
Lumia Flash detected
Protocol version 2.29 Implementation version 2.52
Size of one transfer is 2363392
MMOS RAM support: 0
Size of buffer is 2359296
Number of eMMC sectors: 30535680
Platform ID of device: Nokia.MSM8974..2.2
Async protocol version: 01
Security info:
Platform secure boot enabled
Secure FFU enabled
JTAG eFuse blown
RDC not found
Authentication not done
UEFI secure boot enabled
SHK enabled
Device supports FFU protocols: 0031
Subblock ID 32
getGpt failed. Error code 12 h
Cannot flash partition image. Write the RDC into the device or use open/RnD HW & SW
Operation took about 0.00 seconds.
THOR2_ERROR_UEFI_RDC_OR_AUTHENTICATION_REQUIRED
THOR2 1.8.2.18 exited with error code 84214 (0x148F6)
and when i try to flash this what i get:
Code:
C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool>thor2 -mode uefiflash -ffufile c:\ProgramData\M
icrosoft\Packages\Products\RM-940\RM940_02540.00019.14484.37028_RETAIL_prod_signed_200_01ACB8_ATT-US.ffu
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.2
thor2 -mode uefiflash -ffufile c:\ProgramData\Microsoft\Packages\Products\RM-940\RM940_02540.00019.14484.37028_RETAIL_pr
od_signed_200_01ACB8_ATT-US.ffu
Process started Tue Nov 24 14:15:13 2015
Debugging enabled for uefiflash
Initiating FFU flash operation
WinUSB in use.
isDeviceInNcsdMode
isDeviceInNcsdMode is false
Device mode 6 Uefi mode
[THOR2_flash_state] Pre-programming operations
Disable timeouts
Get flashing parameters
Lumia Flash detected
Protocol version 2.29 Implementation version 2.52
Size of one transfer is 2363392
MMOS RAM support: 0
Size of buffer is 2359296
Number of eMMC sectors: 30535680
Platform ID of device: Nokia.MSM8974..2.2
Async protocol version: 01
Security info:
Platform secure boot enabled
Secure FFU enabled
JTAG eFuse blown
RDC not found
Authentication not done
UEFI secure boot enabled
SHK enabled
Device supports FFU protocols: 0031
Subblock ID 32
[THOR2_flash_state] Device programming started
Using secure flash method
CoreProgrammer version 2015.06.10.001.
Start programming signed ffu file c:\ProgramData\Microsoft\Packages\Products\RM-940\RM940_02540.00019.14484.37028_RETAIL
_prod_signed_200_01ACB8_ATT-US.ffu
FfuReader version is 2015061501
Send FlashApp write parameter: 0x4d544f00
Perform handshake with UEFI...
Flash app: Protocol Version 2.29 Implementation Version 2.52
Unknown sub block detected. Skip...
DevicePlatformInfo: Nokia.MSM8974..2.2
Unknown sub block detected. Skip...
Unknown sub block detected. Skip...
Supported protocol versions bitmap is 31
Secure FFU sync version 1 supported.
Secure FFU async version 1 supported.
Secure FFU sync version 2 supported.
Secure FFU async version 2 supported.
Secure FFU async version 3 supported.
CRC header v. 1
CRC align bytes. 4
Get CID of the device...
Get EMMC size of the device...
Emmc size in sectors: 30535680
CID: Samsung, Size 14910 MB
Start charging...
Requested write param 0x43485247 is not supported by this flash app version.
Start charging... DONE. Status = 0
ConnSpeedEcho: Elapsed= 0.165000, EchoSpeed= 40.91, Transferred= 7077918 bytes
Get security Status...
Security Status:
Platform secure boot is enabled.
Secure eFUSE is enabled.
JTAG is disabled.
RDC is missing from the device.
Authentication is not done.
UEFI secure boot is enabled.
Secondary HW key exists.
Get RKH of the device...
RKH of the device is 3774964A7E6AC7EF7D428DDC0C0EAD71640B0D8DD3BFC3829110AF2D8ED68D7C
Get ISSW Version...
Get ISSW Version, SKIPPED!
Get system memory size...
Size of system mem: 2097152 KB
Read antitheft status...
Requested read param 0x41545250 is not supported by this flash app version.
Send backup to RAM req...
Clearing the backup GPT...SKIPPED!
Successfully parsed FFU file. Header size: 0x000e0000, Payload size: 0x0000000067bc0000, Chunk size: 0x00020000, Header
offset: 0x00000000, Payload offset: 0x00000000000e0000
RKH match between device and FFU file!
Option: Skip CRC32 check in use
Start sending header data...
FlashApp returned reported error in SecureFlashResp!
Status: 0x1304, Specifier: 0x00000000
FA_ERR_FFU_STR_HDR_INVALID_PLATFORM_ID
Send of FFU header failed!
[IN] programSecureFfuFile. Closing c:\ProgramData\Microsoft\Packages\Products\RM-940\RM940_02540.00019.14484.37028_RETAI
L_prod_signed_200_01ACB8_ATT-US.ffu
programming operation failed!
0xFA001304: Platform ID check fails. Reason(s): The FFU file is not meant for this product. The platform ID of image doe
s not match with platform ID of the device.
Operation took about 0.00 seconds.
THOR2_ERROR_FA_FFU_STR_HDR_INVALID_PLATFORM_ID
THOR2 1.8.2.18 exited with error code -100658428 (0xFA001304)
Any Ideas?
ekhader said:
Thanks i got the files now from one drive but no improvement, and Yes the device is in flash mode the USB driver is "NOKIA BOOTMGR2".
when i try to restore the PLAT.bin i get this error:
Code:
C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool>thor2 -mode uefiflash -partitionname PLAT -partitionimagefile c:\dump\PLAT.bin
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.2
thor2 -mode uefiflash -partitionname PLAT -partitionimagefile c:\dump\PLAT.bin
Process started Tue Nov 24 14:35:06 2015
Debugging enabled for partitionimageflash
Initiating flash of partition image operations
WinUSB in use.
Using programming of partition image method
isDeviceInNcsdMode
isDeviceInNcsdMode is false
Detecting UEFI responder
HELLO success
Lumia Flash detected
Protocol version 2.29 Implementation version 2.52
Disable timeouts
Get flashing parameters
Lumia Flash detected
Protocol version 2.29 Implementation version 2.52
Size of one transfer is 2363392
MMOS RAM support: 0
Size of buffer is 2359296
Number of eMMC sectors: 30535680
Platform ID of device: Nokia.MSM8974..2.2
Async protocol version: 01
Security info:
Platform secure boot enabled
Secure FFU enabled
JTAG eFuse blown
RDC not found
Authentication not done
UEFI secure boot enabled
SHK enabled
Device supports FFU protocols: 0031
Subblock ID 32
getGpt failed. Error code 12 h
Cannot flash partition image. Write the RDC into the device or use open/RnD HW & SW
Operation took about 0.00 seconds.
THOR2_ERROR_UEFI_RDC_OR_AUTHENTICATION_REQUIRED
THOR2 1.8.2.18 exited with error code 84214 (0x148F6)
Any Ideas?
Click to expand...
Click to collapse
Get GPT failed so maybe try this...
Code:
thor2 -mode uefiflash -startsector 0 -imagefile "gpt.bin"
tonbonz said:
Get GPT failed so maybe try this...
Code:
thor2 -mode uefiflash -startsector 0 -imagefile "gpt.bin"
Click to expand...
Click to collapse
hi, Unfortunately this didn't work as well , i get this error:
Code:
C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool>thor2 -mode uefiflash -startsector 0 -imagefile
C:\dump\GPT.bin
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.2
thor2 -mode uefiflash -startsector 0 -imagefile C:\dump\GPT.bin
Process started Wed Nov 25 12:49:09 2015
Debugging enabled for imageflash
Initiating flash of image file operations
WinUSB in use.
Using programming of image method
isDeviceInNcsdMode
isDeviceInNcsdMode is false
Detecting UEFI responder
HELLO success
Lumia Flash detected
Protocol version 2.29 Implementation version 2.52
Disable timeouts
Get flashing parameters
Lumia Flash detected
Protocol version 2.29 Implementation version 2.52
Size of one transfer is 2363392
MMOS RAM support: 0
Size of buffer is 2359296
Number of eMMC sectors: 30535680
Platform ID of device: Nokia.MSM8974..2.2
Async protocol version: 01
Security info:
Platform secure boot enabled
Secure FFU enabled
JTAG eFuse blown
RDC not found
Authentication not done
UEFI secure boot enabled
SHK enabled
Device supports FFU protocols: 0031
Subblock ID 32
Cannot flash partition image. Write the RDC into the device or use open/RnD HW & SW
Operation took about 0.00 seconds.
THOR2_ERROR_UEFI_RDC_OR_AUTHENTICATION_REQUIRED
THOR2 1.8.2.18 exited with error code 84214 (0x148F6)
is there a way to restore the Platform ID of the device? I am trying to see if i can find where is the check code in the assembly code of thor2.exe but I am not that good in assembly I wonder if there is anyone who tried to skip the check code in the assembly of the thor2.exe
ekhader said:
hi, Unfortunately this didn't work as well
is there a way to restore the Platform ID of the device? I am trying to see if i can find where is the check code in the assembly code of thor2.exe but I am not that good in assembly I wonder if there is anyone who tried to skip the check code in the assembly of the thor2.exe
Click to expand...
Click to collapse
Possibly the Samsung EMMC on Lumia device bug??? Maybe check with
@Kaptaiin and his thread on flashing Lumia phones or try @Heathcliff74 and his thread here http://forum.xda-developers.com/windows-phone-8/development/windows-phone-internals-unlock-t3257483
tonbonz said:
Possibly the Samsung EMMC on Lumia device bug??? Maybe check with
@Kaptaiin and his thread on flashing Lumia phones or try @Heathcliff74 and his thread here http://forum.xda-developers.com/windows-phone-8/development/windows-phone-internals-unlock-t3257483
Click to expand...
Click to collapse
Thanks alot for your help, I have checked out the HeathCliff tool it seems it has potential but unfortunately it does not support lumia 1520 yet
this Microsoft damn tool broke the phone beyond fixing. I wish if @Heathcliff74 could give his opinion about this problem.
Wait to L1520 support, for now, dump partitions from any compatible FFU with WPInternals and keep them until that time.
Any updates here? I'm stuck in exactly the same place. Thanks!
RM892_fh.edp end MPRG8960_fh.ede
nokia lumia 630
ekhader said:
hi, Unfortunately this didn't work as well , i get this error:
Code:
C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool>thor2 -mode uefiflash -startsector 0 -imagefile
C:\dump\GPT.bin
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.2
thor2 -mode uefiflash -startsector 0 -imagefile C:\dump\GPT.bin
Process started Wed Nov 25 12:49:09 2015
Debugging enabled for imageflash
Initiating flash of image file operations
WinUSB in use.
Using programming of image method
isDeviceInNcsdMode
isDeviceInNcsdMode is false
Detecting UEFI responder
HELLO success
Lumia Flash detected
Protocol version 2.29 Implementation version 2.52
Disable timeouts
Get flashing parameters
Lumia Flash detected
Protocol version 2.29 Implementation version 2.52
Size of one transfer is 2363392
MMOS RAM support: 0
Size of buffer is 2359296
Number of eMMC sectors: 30535680
Platform ID of device: Nokia.MSM8974..2.2
Async protocol version: 01
Security info:
Platform secure boot enabled
Secure FFU enabled
JTAG eFuse blown
RDC not found
Authentication not done
UEFI secure boot enabled
SHK enabled
Device supports FFU protocols: 0031
Subblock ID 32
Cannot flash partition image. Write the RDC into the device or use open/RnD HW & SW
Operation took about 0.00 seconds.
THOR2_ERROR_UEFI_RDC_OR_AUTHENTICATION_REQUIRED
THOR2 1.8.2.18 exited with error code 84214 (0x148F6)
is there a way to restore the Platform ID of the device? I am trying to see if i can find where is the check code in the assembly code of thor2.exe but I am not that good in assembly I wonder if there is anyone who tried to skip the check code in the assembly of the thor2.exe
Click to expand...
Click to collapse
marcio-msa said:
RM892_fh.edp end MPRG8960_fh.ede
Click to expand...
Click to collapse
Hello People, I have a big problem, my nokia Phone model: Lumia 630 Dual SIM
PackageTitle: RM-978 VAR EURO DE CV
Product Code: 059V9G7
ManufacturerHardwareModel: RM-978
Last Firmware: 02040.00021.15235.50004
After I put a new firmware (unfortunately not the right one 059v506 mala) and now it does not turn on. What can i do in the pc it does not connect does not vibrate and just died
Rockies19 said:
Any updates here? I'm stuck in exactly the same place. Thanks!
Click to expand...
Click to collapse
Any update on Lumia 1520 RM-940 issue discussed above. Mine is ATT US 32gb version.
I am stuck in same place. The phone is bricked and no rom will ever flash on it because of the wrong platform ID error.
Phone is UEFI flash mode (connected via WinUSB) with Platform ID of the device being reported as "PlatformInfo is Nokia.MSM8974..2.2".
vdenduluri said:
Any update on Lumia 1520 RM-940 issue discussed above. Mine is ATT US 32gb version.
I am stuck in same place. The phone is bricked and no rom will ever flash on it because of the wrong platform ID error.
Phone is UEFI flash mode (connected via WinUSB) with Platform ID of the device being reported as "PlatformInfo is Nokia.MSM8974..2.2".
Click to expand...
Click to collapse
And has anyone tried to download plat.bin in bulk storage mode using emmcrawtool, a tool where you can load any partition. However, you can use the Windows device repair tool to run the command
Code:
thor2 -mode fbreader-ffufile "C:\ storage location \xxx.ffu" -dump_partitions -filedir D:\dump (the dump may be different
), performs the dump of all partitions of the firmware
Nokia.MSM8974..2.2 this bootloader you can flash firmware from rm-938, not blocked under ATT, by the following command
Code:
thor2 -mode uefiflash -ffufile "C:\storage location \xxx.ffu" -productcodeupdate "product code from rm-938" -skip_flash
and
Code:
thor2 -mode uefiflash -ffufile "C:\storage location \xxx.ffu"
Same Problem
The same thing happened with my lumia 435 after I accidentally format the emmc, it would be possible to create a new emergency file (MPRG8x12_fh.ede in my case) so that after installed the device enter the data storage mode to restore the partition PLAT and UEFI?
Post your forum requests here click , or quote me here to vote for the new thread request !
:good::good:
I'm also having issues unbricking my Nokia 630 (RM-979),
It's completely bricked. Nothing shows at the screen. Completely black.
It is detected on Windows Device Manager as QDLoader 9008 (COM7), but I'm not being able to flash it.
I have tried:
- Windows Phone Internals
- Windows Device Recovery Tool
- NaviFirm
- Thor
Result from thor:
> thor2 -mode ffureader -ffufile "C:\rm-914\XXX.ffu" -dump_gpt -filedir C:\dump
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.2
thor2 -mode ffureader -ffufile C:\rm-914\XXX.ffu -dump_gpt -filedir C:\dump
Process started Wed Dec 29 17:13:00 2021
Logging to file C:\Users\Angelo\AppData\Local\Temp\thor2_win_20211229171300_ThreadId-13244.log
Debugging enabled for ffureader
Initiating do FFUReader operations
Version of FfuReader is 2015061501
Parsing FFU... Please wait...
Failed to parse FFU file. Header size: 0x00000000, Payload size: 0x0000000000000000, Chunk size: 0x00000000, Header offset: 0x00000000, Payload offset: 0x0000000000000000
File open failed
THOR2_ERROR_FFUREAD_CORRUPTED_FFU
THOR2 1.8.2.18 exited with error code 84204 (0x148EC)
Hi,
My Lumia RM-1092 does not turn over. Microsoft Recovery tool can not recover it. When I use the
HTML:
thor2 -mode emergency -hexfile "C:\Emergency\MPRG8x12_fh.ede" -edfile "C:\Emergency\RM1092_fh.edp"
command gives the following error:
THOR2_EMERGENCYFLASHV1_ERROR_MSG_SEND_RECEIVE_FAILED
Please help me!
weuller_pc said:
Hi,
My Lumia RM-1092 does not turn over. Microsoft Recovery tool can not recover it. When I use the
HTML:
thor2 -mode emergency -hexfile "C:\Emergency\MPRG8x12_fh.ede" -edfile "C:\Emergency\RM1092_fh.edp"
command gives the following error:
THOR2_EMERGENCYFLASHV1_ERROR_MSG_SEND_RECEIVE_FAILED
Please help me!
Click to expand...
Click to collapse
copy files
MPRG8x12_fh.ede
RM1092_fh.edp
for
(WINDOWS x86)
C:\Program Files\Microsoft Care Suite\Windows Device Recovery Tool
(WINDOWS x64)
C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool
================================================== ==================================
CMD.EXE
(WINDOWS x86)
cd C:\Program Files\Microsoft Care Suite\Windows Device Recovery Tool
(WINDOWS x64)
cd C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool
thor2 -mode emergency -hexfile MPRG8x12_fh.ede -edfile RM1092_fh.edp -orig_gpt
I have tried to mod my Nokia Lumia 930. My bootloader was already unlocked for side loading. Now I wanted to mod Astoria on it so that I can also use Android apps. However, Windows Phone Internals kept telling me that my phone is already unlocked. When starting the Mass Storage Mode and Enabled Toor Access, the message of the missing FFU appeared.
After trying to reflash, I entered the red bootloop and could no longer access the phone. The recovery tool also failed here.
When using the Thor2 tool manually, the following message appeared:
Bash:
PS C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool> .\thor2.exe -mode uefiflash -ffufile "..\..\..\Users\myUser\Downloads\windowsphone-deploy\Repository\RM-1045\RM1045_02540.00019.15234.50006_RETAIL_prod_signed_1012_02699D_000-DE.ffu"
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.2
............
programming operation failed!
327681 Error: Unable to send or receive message.
Operation took about 8.00 seconds. Average transfer speed was 2.65 MB/s.
THOR2_ERROR_UNABLE_TO_SEND_OR_RECEIVE_MESSAGE_DURING_SFFU_PROGRAMMING
The phone went off and since then it is not responding. Also not on the power button or the combo power button + volume down.
Full Log:
Spoiler
Bash:
PS C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool> .\thor2.exe -mode uefiflash -ffufile "..\..\..\Users\MyUser\Downloads\windowsphone-deploy\Repository\RM-1045\RM1045_02540.00019.15234.50006_RETAIL_prod_signed_1012_02699D_000-DE.ffu"
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.2
C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool\thor2.exe -mode uefiflash -ffufile ..\..\..\Users\MyUser\Downloads\windowsphone-deploy\Repository\RM-1045\RM1045_02540.00019.15234.50006_RETAIL_prod_signed_1012_02699D_000-DE.ffu
Process started Thu Dec 29 21:58:12 2022
Logging to file C:\Users\MyUser\AppData\Local\Temp\thor2_win_20221229215812_ThreadId-51424.log
Debugging enabled for uefiflash
Initiating FFU flash operation
WinUSB in use.
isDeviceInNcsdMode
isDeviceInNcsdMode is false
Device mode 6 Uefi mode
[THOR2_flash_state] Pre-programming operations
Disable timeouts
Get flashing parameters
Lumia Flash detected
Protocol version 2.34 Implementation version 2.59
Size of one transfer is 2363392
MMOS RAM support: 1
Size of buffer is 2359296
Number of eMMC sectors: 61071360
Platform ID of device: Nokia.MSM8974.P6180.2.2
Async protocol version: 01
Security info:
Platform secure boot enabled
Secure FFU enabled
JTAG eFuse blown
RDC not found
Authentication not done
UEFI secure boot enabled
SHK enabled
Device supports FFU protocols: 0015
Subblock ID 32
[THOR2_flash_state] Device programming started
Using secure flash method
CoreProgrammer version 2015.06.10.001.
Start programming signed ffu file ..\..\..\Users\MyUser\Downloads\windowsphone-deploy\Repository\RM-1045\RM1045_02540.00019.15234.50006_RETAIL_prod_signed_1012_02699D_000-DE.ffu
FfuReader version is 2015061501
Send FlashApp write parameter: 0x4d544f00
Perform handshake with UEFI...
Flash app: Protocol Version 2.34 Implementation Version 2.59
Unknown sub block detected. Skip...
DevicePlatformInfo: Nokia.MSM8974.P6180.2.2
Unknown sub block detected. Skip...
Unknown sub block detected. Skip...
Supported protocol versions bitmap is 15
Secure FFU sync version 1 supported.
Secure FFU async version 1 supported.
Secure FFU sync version 2 supported.
Secure FFU async version 2 supported.
CRC header v. 1
CRC align bytes. 4
Get CID of the device...
Get EMMC size of the device...
Emmc size in sectors: 61071360
CID: Samsung, Size 29820 MB
Start charging...
Start charging... DONE. Status = 0
ConnSpeedEcho: Elapsed= 0.212000, EchoSpeed= 31.84, Transferred= 7077918 bytes
Get security Status...
Security Status:
Platform secure boot is enabled.
Secure eFUSE is enabled.
JTAG is disabled.
RDC is missing from the device.
Authentication is not done.
UEFI secure boot is enabled.
Secondary HW key exists.
Get RKH of the device...
RKH of the device is 800EEB508F7BBDF12A19262621FD837297A3B062FE2A7078C0F3167E57F21217
Get ISSW Version...
ISSW Version: 216
Mon Aug 11 15:16:52 EEST 2014;ISSW v0216; main; OS; DNE; KCI 1296; ASIC 8974;
Get system memory size...
Size of system mem: 2097152 KB
Read antitheft status...
Requested read param 0x41545250 is not supported by this flash app version.
Send backup to RAM req...
Clearing the backup GPT...SKIPPED!
Successfully parsed FFU file. Header size: 0x000e0000, Payload size: 0x000000006f400000, Chunk size: 0x00020000, Header offset: 0x00000000, Payload offset: 0x00000000000e0000
RKH match between device and FFU file!
Option: Skip CRC32 check in use
Start sending header data...
Start sending payload data V2Sbl in async mode...
Percents: 0
Percents: 1
Exception during programming: 262160
Safe write descriptor index reached: false
Payload data transfer speed (16.88 MB/s) Elapsed time 1.33 sec
Payload data size 22.500305 MB
[IN] programSecureFfuFile. Closing ..\..\..\Users\MyUser\Downloads\windowsphone-deploy\Repository\RM-1045\RM1045_02540.00019.15234.50006_RETAIL_prod_signed_1012_02699D_000-DE.ffu
programming operation failed!
327681 Error: Unable to send or receive message.
Operation took about 8.00 seconds. Average transfer speed was 2.65 MB/s.
THOR2_ERROR_UNABLE_TO_SEND_OR_RECEIVE_MESSAGE_DURING_SFFU_PROGRAMMING
THOR2 1.8.2.18 exited with error code 262160 (0x40010)
This means your phone is hardbricked you should take it to the service center
Is der a solution without service center? Its out of support.
Huskynarr said:
Is der a solution without service center? Its out of support.
Click to expand...
Click to collapse
does jtag work?
Nope, doesnt work. Have send it now back to seller.