Database Develop

[Q] OTA Update with custom recovery?

Hello! I received the 1.29.1540.16 update today. I have the Team Win's recovery flashed on my Dev Edition. When I try to update, TWRP starts and no update happens.
How should the OTA updates be addressed with custom recoveries?

Same here... I have a rooted Dev Edition with CWM Touch recovery. Got prompted to update to 1.29.1540.16 (currently on 1.29.1540.3). Tried to install a couple of times, but, it just reboots without installing the update.

mrcobain said:
Hello! I received the 1.29.1540.16 update today. I have the Team Win's recovery flashed on my Dev Edition. When I try to update, TWRP starts and no update happens.
How should the OTA updates be addressed with custom recoveries?
Click to expand...
Click to collapse
Flash stock recovery first.

MediocreFred said:
Same here... I have a rooted Dev Edition with CWM Touch recovery. Got prompted to update to 1.29.1540.16 (currently on 1.29.1540.3). Tried to install a couple of times, but, it just reboots without installing the update.
Click to expand...
Click to collapse
i think you have to install stock recovery and maybe relock bootloader

skinsfanbdh said:
i think you have to install stock recovery and maybe relock bootloader
Click to expand...
Click to collapse
%$($*&%(@%... I was too hasty. Rebooted to recovery, wiped cache and tried to flash the downloaded OTA update zip (named OTA_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16_R-1.29.1540.3_release_318620_signednimix5ealszkrygs.zip) which I found in the downloads folder.
It started the installation, and is now hung at the "Running bug-fix1 tool..." step.
Not sure how long I should wait before aborting it. Am concerned that aborting (forcing a reboot) will cause more damage.

MediocreFred said:
%$($*&%(@%... I was too hasty. Rebooted to recovery, wiped cache and tried to flash the downloaded OTA update zip (named OTA_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16_R-1.29.1540.3_release_318620_signednimix5ealszkrygs.zip) which I found in the downloads folder.
It started the installation, and is now hung at the "Running bug-fix1 tool..." step.
Not sure how long I should wait before aborting it. Am concerned that aborting (forcing a reboot) will cause more damage.
Click to expand...
Click to collapse
abort and restore you backup

Aborted... rebooted... looks OK. Still on 1.29.1540.3. Still prompted to update. So, basically, status quo.
Looked around for stock recovery - the only ones I find are the 401 (instead of 1540) - which, if I understand, is from the international version and NOT the Dev Edition. Can anybody please help me get the stock recovery for the Dev Edition. (My first nandroid backup was *after* installing CWM and rooting.)

MediocreFred said:
Aborted... rebooted... looks OK. Still on 1.29.1540.3. Still prompted to update. So, basically, status quo.
Looked around for stock recovery - the only ones I find are the 401 (instead of 1540) - which, if I understand, is from the international version and NOT the Dev Edition. Can anybody please help me get the stock recovery for the Dev Edition. (My first nandroid backup was *after* installing CWM and rooting.)
Click to expand...
Click to collapse
you may be able to get it to install if your on a stock rom but im not sure about it

Yeah, I have stock ROM. Looks like I have to do what this person has done here.
Has to wait until I get home this evening.

MediocreFred said:
Yeah, I have stock ROM. Looks like I have to do what this person has done here.
Has to wait until I get home this evening.
Click to expand...
Click to collapse
or just flash the ruu for your phone

But, doesn't flashing the RUU wipe apps/data? I'd like to do this in the least destructive way possible. If I can get away with just flashing original recovery, installing the OTA update and flashing CWM back, I'll be happy.

yes it will. if you can get away with that then go for it

I have cwm installed on my htc one and I couldn't ruu my one back to a stock image. It would freeze up during the flash image process in the beginning.

No harm in trying the 401 or 707 recoveries ... if OTA doesnt work, just hard reboot and flash another
AND REMEMBER - NO NEED TO RELOCK FOR OTA UPDATES !

Ok got this to work and here's how, it goes without saying that this was my experience and the steps I used and I by no means accept any responsibility for any of these steps functioning on any other device...
I was using TWRP 2.5 and was rooted but otherwise was still on the stock rom that my developer edition shipped with.
I went here and downloaded the stock recovery for .16.
I opened the rar file which included other bat files to push the recovery but I didn't use that. I went to the fastboot folder and pulled the recovery.img file and dropped it in my M7 all in one tool kit folder under data and recoveries.
I then plugged in the phone and opened the toolkit and flashed my own recovery and followed the directions in the toolkit. After reboot the device came up and wanted to load the update which I let it do.
It went through and loaded and the scroll bar went all the way to the end and stuck. I waiting ten minutes and when it didn't restart I held the power button for about 15 seconds (until buttons stopped flashing) and the device screen went blank and I let go of the power button.
At this point it went through a couple screens where it appeared to be loading the update. Scroll bar went to the end and the device restarted and did that again. On the third restart it did a full boot and was good.
I then went back to the toolkit and flashed the TWRP recovery and then after reboot I went into recovery and flashed supersu to get root back.
Not sure if this helps anyone but wanted to share my experience...
MG

Need stock recovery for 64-bit Australian

I flashed custom recovery and rooted my 510, so I could remove some of the system apps. Now, my phone has downloaded an OTA update that the custom recovery fails to install. I'd like to go back to the stock recovery, but I've no longer got access to the PC where I backed up the original recovery image... D'oh!
Can anyone help by providing me a stock recovery image please?

rodbacon said:
I flashed custom recovery and rooted my 510, so I could remove some of the system apps. Now, my phone has downloaded an OTA update that the custom recovery fails to install. I'd like to go back to the stock recovery, but I've no longer got access to the PC where I backed up the original recovery image... D'oh!
Can anyone help by providing me a stock recovery image please?
Click to expand...
Click to collapse
Why would you wanna go back? That update doesn't help anything and you won't see or notice any difference... You'd have to relock your bootloader and everything. It's not worth it for that update.

Is there a way I can disable OTA updates, so my wife doesn't see the annoying "update ready to install" message constantly on her screen?

rodbacon said:
Is there a way I can disable OTA updates, so my wife doesn't see the annoying "update ready to install" message constantly on her screen?
Click to expand...
Click to collapse
Yeah if you freeze the something called Updater I used titanium backup when I wanted that frozen/disabled.

Awesome. Thanks.

Lollipop upgrade stuck at TWRP on rooted Verizon Moto X Developer Edition (XT1060)

I have a rooted Verizon Moto X 2013 Developer Edition (XT1060) with Android 4.4.4, TWRP and SuperSU installed. I rooted the phone so I could install a wi-fi tethering app that I frequently use. Last night I noticed that the Lollipop OTA was available, and being a dumas, I proceeded to download it without coming to xda-developers first to educate myself on the correct process and potential issues with the upgrade (one such issue being whether I will be able to run my tethering app after the upgrade). Consequently, after I downloaded the upgrade, my phone restarted and booted to the TWRP screen, and I don't know where to go from there to complete the upgrade, if it's even possible to do so.
This is my only phone, so it's more important that I get my phone up and running in the next 1-2 hours than it is to complete the upgrade. With that in mind, what should I do next? Is there a way to quickly abort the upgrade process, perhaps by simply deleting the update file "Blur_Version.212.166.3.ghost_verizion.Verizon.en.US.zip" in my cache folder using TWRP's File Manager and rebooting my phone? Or is it possible to complete the upgrade process in the next 1-2 hours? If so, how should I proceed?
By the way, TWRP is displaying the following error messages:
Error executing updater binary in zip '/cache/Blur_Version.212.166.3.ghost_verizion.Verizon.en.US.zip'
Error installing zip file '/cache/Blur_Version.212.166.3.ghost_verizion.Verizon.en.US.zip'
Thanks in advance for helping me recover from my dumas behavior.

The OTA update file does not work with TWRP, IMHO. It only works with the stock recovery.
If you just boot back out of TWRP (boot back to regular system) your phone should still be functional.

kschang said:
The OTA update file does not work with TWRP, IMHO. It only works with the stock recovery.
If you just boot back out of TWRP (boot back to regular system) your phone should still be functional.
Click to expand...
Click to collapse
Thanks, kschang. Your suggestion worked, but not right away, so there appears to be a twist involved that other users should be aware of if they get stuck in the same situation I was in.
As I indicated in my original post, after downloading the update, my phone would power off and boot to TWRP. From TWRP's main menu I would click on "Reboot," then "System." I tried this a number of times, and each time my phone would reboot to what it appeared to be before I downloaded the upgrade, but only for about 10 seconds, then it would power off and reboot to TWRP again--except for just now, when the phone displayed a message that the upgrade had failed and no changes were made to my phone! Apparently the upgrade process has to fail a certain number of times before it finally aborts. I don't know what the number is, but I must have tried rebooting my phone at least 10-15 times before the upgrade process aborted.
So thanks again for your suggestion. It encouraged me to keep trying to reboot until it ultimately worked:good:

I had the same issue with my phone rebooting so I forced the system update app to freeze via Titanium Backup and that seemed to work.
My phone now is kinda messed up though. To get it to boot I have to hold the volume key while powering it up and choose "boot normally". Any time I just restart my phone or power it up while it's off I get a black screen because like the OP I tried to update to Lollipop without reading XDA first. Doh!!
Any first impressions on the update for this phone by the way? Battery life improve or get worse? Can I still use Xposed on Lollipop? Rooting still possible? Wifi tethering for us on unlimited data?

Same situation. Want to upgrade but not sure how now... waiting for an angel to answer my prayers!

daddylonglegs said:
I had the same issue with my phone rebooting so I forced the system update app to freeze via Titanium Backup and that seemed to work.
My phone now is kinda messed up though. To get it to boot I have to hold the volume key while powering it up and choose "boot normally". Any time I just restart my phone or power it up while it's off I get a black screen because like the OP I tried to update to Lollipop without reading XDA first. Doh!!
Any first impressions on the update for this phone by the way? Battery life improve or get worse? Can I still use Xposed on Lollipop? Rooting still possible? Wifi tethering for us on unlimited data?
Click to expand...
Click to collapse
Root is still possible. The only issue i had was after flashing Twrp, if i rebooted the phone and then tried to boot the recovery Twrp was gone. So i reflashed Twrp while i was still in fastboot i selected "recovery" it booted into Twrp and i flashed a SuperSU zip.
After that i could reboot into Teamwin without issue. I haven't tried Xposed yet. Battery life is great on my end.
---------- Post added at 01:18 AM ---------- Previous post was at 01:16 AM ----------
rice923 said:
Same situation. Want to upgrade but not sure how now... waiting for an angel to answer my prayers!
Click to expand...
Click to collapse
The way i did it was to fastboot flash the dev edition 4.4.4 files to unroot. Then i used Verizon upgrade assistant to take the small update that came out awhile ago. After that i factory reset the phone, checked for updates and the first of two updates installed then it updated to 5.1
I reinstalled Twrp and regained root access.

James L said:
The way i did it was to fastboot flash the dev edition 4.4.4 files to unroot. Then i used Verizon upgrade assistant to take the small update that came out awhile ago. After that i factory reset the phone, checked for updates and the first of two updates installed then it updated to 5.1
I reinstalled Twrp and regained root access.
Click to expand...
Click to collapse
Would flashing dev 4.4.4 unroot as well as remove twrp? Twrp seems to be the main obstacle to get past in order to get the update going. If so, I might just do this tomorrow

The immediate way to get out of the failed flash and reboot-cycle is to (quickly) use a file explorer such as ES File Explorer and migrate to your internal cache folder and delete the Verizon flash file. That stops the reboot cycle in its tracks. You'll get the "failed" message before too long, too.
I found I had more like a minute before a reboot occurred after a failed flash. In other words, I'd be stuck on TWRP, clicked to reboot system, it would reboot. Then, I had about a minute to do stuff before it would shutdown/reboot again. During that time, I would just go to ES File Explorer and delete the Verizon update file from the cache folder, and problem solved.
Of course, it will download again shortly thereafter, but won't do anything until you agree to go ahead and install it.
Guess I'm going to have to flash all the 4.4.4 files like stated above to get back to stock (lame!) and then do the OTA updates. I seem to recall someone had figured out how to flash OTA on a previous update without having to go back to stock, though.

rice923 said:
Would flashing dev 4.4.4 unroot as well as remove twrp? Twrp seems to be the main obstacle to get past in order to get the update going. If so, I might just do this tomorrow
Click to expand...
Click to collapse
Yes it would remove Twrp if you flash the stock files.
---------- Post added at 10:34 AM ---------- Previous post was at 10:25 AM ----------
You could take the little update prior to the 5.1 update by reflashing the stock recovery that will stop the bootloop from the smaller update.
I didn't lose root and just reflashed Twrp. Then after a bit the 5.1 update was released so i just took the jump and flashed stock files to unroot, and took the update. Is it possible to update to 5.1 with root and a stock recovery?..... Not sure i was going to try it but didn't

Root is still possible. The only issue i had was after flashing Twrp, if i rebooted the phone and then tried to boot the recovery Twrp was gone. So i reflashed Twrp while i was still in fastboot i selected "recovery" it booted into Twrp and i flashed a SuperSU zip.
Click to expand...
Click to collapse
Verizon MotoX Developer Edition (2013) - I am having the same issue installing TWRP after reverting to stock and receiving/installing the 5.1 OTA. If I try to flash TWRP via fastboot, it doesn't seem to take. The flash shows as a success, but when I reboot to recovery I'm still in stock. I've tried flashing TWRP then using the volume rocker to immediately boot into TWRP, with no success. I've also tried holding down the bootloader key combo immediately after "fastboot reboot", with no success. When I boot up, though, my apps will optimize every time. Am I missing something?
EDIT: Resolved the problem, turns out I was not using the volume up button to enter recovery immediately after flashing...smh

Failed update :/

Right guys, I was on the Android Nougat nbd90z (flashable & image, no encryption, no dm verification) ROM and an update icon notification did pop up. In the heat of the moment I tried to update and now whatever I do phone constantly reboots to TWRP. I even tried to restore to old backup and nothing helps, phone boots into recovery...
HELP

xywojtek said:
Right guys, I was on the Android Nougat nbd90z (flashable & image, no encryption, no dm verification) ROM and an update icon notification did pop up. In the heat of the moment I tried to update and now whatever I do phone constantly reboots to TWRP. I even tried to restore to old backup and nothing helps, phone boots into recovery...
HELP
Click to expand...
Click to collapse
To update via OTA, you need to be completely on stock.
Go to TWRP and wipe system,cache,dalvik cache partition and flash rom again. Take nandroid backup first.

If you're in TWRP you can easily sideload the OTA in TWRP's Advanced/Sideload - the OTA & instructions are here:
https://developers.google.com/android/nexus/ota#shamu

There isn't an OTA posted just the version you're on
Sent from my Nexus 6

Except that it's not working...?

ok, it's sorted after going into bootloader and a few random actions in TWRP. I still can not understand how nandroid restore did not work?

Update - Install package failure

I tried to update my phone but unfortunately during the installation the one with Red magic logo saying
"Dont operate in system update" it stops at 25%.
Formerly my phone has root access to I reflashed almost all the necessary files such as recovery, boot and system and locked my bootloader again but still the update install fails
Any tips to successfully install updates?

leipnacht said:
I tried to update my phone but unfortunately during the installation the one with Red magic logo saying
"Dont operate in system update" it stops at 25%.
Formerly my phone has root access to I reflashed almost all the necessary files such as recovery, boot and system and locked my bootloader again but still the update install fails
Any tips to successfully install updates?[/QUOTE
You have to uninstall magisk using TWRP recovery
There is magisk_uninstall.zip you have to download from the official magisk site
Download and flash it using TWRP recovery
And then you can easily update
Click to expand...
Click to collapse

em902566 said:
leipnacht said:
I tried to update my phone but unfortunately during the installation the one with Red magic logo saying
"Dont operate in system update" it stops at 25%.
Formerly my phone has root access to I reflashed almost all the necessary files such as recovery, boot and system and locked my bootloader again but still the update install fails
Any tips to successfully install updates?[/QUOTE
You have to uninstall magisk using TWRP recovery
There is magisk_uninstall.zip you have to download from the official magisk site
Download and flash it using TWRP recovery
And then you can easily update
Click to expand...
Click to collapse
I already did that. Some users say that the update fails for them too. I guess the OTA update from Nubia is a bad copy.
We'll wait for Nubia to upload the version 2.31 update on their site.
Click to expand...
Click to collapse

Hello i have the same problem did you resolve it?