So im on a Samsung Galaxy S6 SM-G920T and my phone name is ZEROTFLETMO
will the twrp recovery name ZEROTFL work on my device
Azaurelli said:
So im on a Samsung Galaxy S6 SM-G920T and my phone name is ZEROTFLETMO
will the twrp recovery name ZEROTFL work on my device
Click to expand...
Click to collapse
Go to http://forum.xda-developers.com/tmobile-galaxy-s6/general/tmb-g920tuvu4epf1-20160627114318-zip-t3408162
Don't use Stock TWRP unless you have a kernel that has dm-verity disabled. The stock kernel has it enabled, which will cause a bootloop. Instead, use IdleKernel TWRP, which prevents the bootloop. You'll be looking for the zeroflte version.
I have stock kernel, i only have the OEM active with the latest FM...
Related
I softbricked my phone trying to install bootloader/modem for XtreStoLite ROM and I never completed the process. Only fix was to do Emergency Recovery with Samsung SmartSwitch, which I did. Now I have 100% stock 6.0.1 and stock recovery.
Next I tried to install TWRP via Odin. Now the phone boots normally, but I can't boot into recovery. When I try to boot into recovery, it says "Recovery is not SEANDROID enforcing" and it's stuck in boot. What is the method to successfully install TWRP on 6.0.1?
Thanks
Throw this in google and youll find the post you want (if you haven't already). Sorry cant post links yet:
how-to-flash-marshmallow-update-sm-t3362983
Original S9 & S9+ Bootlogo for Galaxy S6 Edge+.
Works on S6 Edge+ Exynos variant only.
Credits -
@rbnla
@grxgen
Phone doesn't boot anymore
Hey, after I flashed one of these logos (S9 + black) via TWRP my SM-G928F (exynos) boots only in download mode. I'm not able to boot into recovery or system. My display is black
Is there any possibility to fix this?
DGB100 said:
Hey, after I flashed one of these logos (S9 + black) via TWRP my SM-G928F (exynos) boots only in download mode. I'm not able to boot into recovery or system. My display is black
Is there any possibility to fix this?
Click to expand...
Click to collapse
I downloaded the black S9+ bootlogo (Havent tested others yet) , then I entered TWRP recovery, hit install, then flashed the boot logo, after that you hit reboot in Twrp after flash and everything should be fine because mine worked out fine. I'm using the SM-G928W8 Exynos variant .
(No need to wipe cache after flash)
But since it did not work out for you, and you can only enter download mode, if you are not able to get back into TWRP recovery and only get into download mode, your only option would be to restore your phone back to stock firmware by flashing your phone with Odin and your specific firmware for your device.
---------- Post added at 04:54 PM ---------- Previous post was at 04:48 PM ----------
Ruturaj Kadam said:
Original S9 & S9+ Bootlogo for Galaxy S6 Edge+.
Works on S6 Edge+ Exynos variant only.
Credits -
@rbnla
@grxgen
Click to expand...
Click to collapse
Thank you very much ! I flashed the black Galaxy S9+ boot logo through Twrp and voila! Works like a charm
As long as you don't mind it being slightly big in size guys, it should work for your device if you flash it properly, and it looks good!
I'm using the Canadian version SM-G928W8 on Custom ROM.
Hey here
Im on android 7.0 and the device is galaxy s7 edge G935F and no matter what i do..... Unrooting with the managaer options or flash the magisk uninstaller in twrp it always causes a boot loop. It starts normal when i flash magisk again... it would be easy to flash a new rom but i want to keep some changes ive made while rooted so thats the problem and i read a lot of flashing the boot loader (thats the BL part in the extracted rom package right?) from the rom thats currently installed. But that would wipe everything right? Or can i somehow flash that one like i flash magisk in twrp
I wonder if here is anything i can do to unroot successfully? Cache wipe wont end the loop
As always thanks for your time and answer
With best regards
Chris
Im trying to flash magisk to my samsung galaxy tab 3 via TWRP but it fails after I select the .zip file containg magisk. My tablet has android 4.4.2.
sebolio123 said:
Im trying to flash magisk to my samsung galaxy tab 3 via TWRP but it fails after I select the .zip file containg magisk. My tablet has android 4.4.2.
Click to expand...
Click to collapse
Magisk runs only on Android 5.0 and up
I have a Galaxy sm-a600p (Sprint) with an unlocked bootloader and TWRP. I have both wiped and formatted my device using the twrp options and when I flash the rom it successfully flashes onto the Galaxy a6 device but when I reboot to system it either just stays on the boot screen or boots to a black screen. Any help for me to get any Generic System Image on my a6? The only rom that it will accept is Stock Rom Android 10 flashed via Odin software.
Any Help?
I have the same problem on A600FN. It think that something is wrong with vendor.