After i flashed lenovo k3 note with CWM recovery and installed SuperSu-v2.46 using PDAnet [CWM] , i am getting black screen after lenovo logo. After that i tried clearing data,cache and dalvik cache but nothing helped. I can get into CWM recovery. So I tried to reflash CWM recovery but again the same problem. I had the same problem with my friend's phone, what his phone was running was twrp but we tried to install cwm and same problem occured in his phone too. I think the problem is with recovery.Please help me how to flash twrp recovery or flash back to stock recovery.
Same with me.
dakshesh6 said:
After i flashed lenovo k3 note with CWM recovery and installed SuperSu-v2.46 using PDAnet [CWM] , i am getting black screen after lenovo logo. After that i tried clearing data,cache and dalvik cache but nothing helped. I can get into CWM recovery. So I tried to reflash CWM recovery but again the same problem. I had the same problem with my friend's phone, what his phone was running was twrp but we tried to install cwm and same problem occured in his phone too. I think the problem is with recovery.Please help me how to flash twrp recovery or flash back to stock recovery.
Click to expand...
Click to collapse
I flashed TWRP and now its all black. Currently downloading stock 6.0 ROM.
the same problem too
Same problem here. I removed the battery and restored the backup. But the same thing happens whenever I flash SuperSU recovery flashable zip. (Using TWRP recovery)
did it work?
Related
I tried following the steps indicated in this thread http://forum.xda-developers.com/showthread.php?t=1424997. I was able to successfully flash the ROM N7000DXLR5---4.0.4/12.07.30-N7000OLBLR2---Download--Philippines (Smart) . I was already on the last part where the phone should reboot and would install some applications but the phone is just stuck on the Samsung logo screen. I waited for almost 2 hours already. I tried taking out the battery and rebooting the phone but its still stuck in the Samsung logo. The Volume down+home+power key is still working as well as the volume up+home+power key. I don't want to take another step because I'm afraid of my phone getting bricked.
I previously had a Jellybean custom ROM installed but don't like it since S-Pen features aren't working.
Install philz ics kernel from stock recovery and reboot into recovery. You will see cwm. Now do a factory reset. Then reboot.
You need a factory reset but 4.0.4 is not a safe kernel, that's why you need Philz kernel.
If you want a full stock ROM with kernel (like I need to send for warranty repair),
flash any GB stock rom appropriate for you, (still hang at samsung logo),
factory reset on recovery and update using kies to 4.0.4
nokiamodeln91 said:
Install philz ics kernel from stock recovery and reboot into recovery. You will see cwm. Now do a factory reset. Then reboot.
Click to expand...
Click to collapse
Follow him not one above me
Sent from my GT-N7000 using Tapatalk 2
Stuck at Samsung logo
Stuck at samsung logo
running on siyah kernel v6.5b
tried to install alliance mod rom v8 and ended up at samsung logo
tried factory reset and also the wipe cache partition dint work erased the dalvik cache too
what do i do now??
I have access to root..
What do i do now??
algorithm101 said:
Stuck at samsung logo
running on siyah kernel v6.5b
tried to install alliance mod rom v8 and ended up at samsung logo
tried factory reset and also the wipe cache partition dint work erased the dalvik cache too
what do i do now??
I have access to root..
What do i do now??
Click to expand...
Click to collapse
if you are using N7000 then siyah kernel is not meant for this device as yet.
try to philz kernel if you can access recovery and then try to flash alliance rom.
or simply flash stock rom accessing the download mode.
hello every one
i have galaxy ace s5830 stock gb
i installed cwm5 sucsesfully from odin and my
phone automaticaly boot normaly.then i put my phone into recovery for checking recovery version. i saw cwm5 version installed there then i reboot my phone again into normal mode.
aftr this i
formate 'hard reset' my phone from phone setting
then it stuck after boot animation on samsung logo. after every 30 second it restart boot animation but stuck on samsung logo
screen.
i tried every thing wipe data
cache reset not dalvic cache in cwm 5 but no solution.
then i flash stock gb via odin it says paas
phone boot but still same stuck on samsung logo then i wipe
data cache reset from stock recovery and
then my phone could boot normaly.
i dont know what was the problem
because every thing i did fine.
could any one explain what was the issue ?
is this happen to any one else ?
does cwm5 works with stock gb.
and that cwm 5 was tested by other person with same model
arshad522 said:
hello every one
i have galaxy ace s5830 stock gb
i installed cwm5 sucsesfully from odin and my
phone automaticaly boot normaly.then i put my phone into recovery for checking recovery version. i saw cwm5 version installed there then i reboot my phone again into normal mode.
aftr this i
formate 'hard reset' my phone from phone setting
then it stuck after boot animation on samsung logo. after every 30 second it restart boot animation but stuck on samsung logo
screen.
i tried every thing wipe data
cache reset not dalvic cache in cwm 5 but no solution.
then i flash stock gb via odin it says paas
phone boot but still same stuck on samsung logo then i wipe
data cache reset from stock recovery and
then my phone could boot normaly.
i dont know what was the problem
because every thing i did fine.
could any one explain what was the issue ?
is this happen to any one else ?
does cwm5 works with stock gb.
and that cwm 5 was tested by other person with same model
Click to expand...
Click to collapse
Did you flash cwm 5.0.2.6.FIX? Did you root your device?
Try it flash a fresh stock via odin and then flash root, boot in android, restart and then flash cwm 5.0.2.6. fix and reboot as normal if you get bootloop (strange case) do the 3 wipes
Viper The Ripper said:
Did you flash cwm 5.0.2.6.FIX? Did you root your device?
Try it flash a fresh stock via odin and then flash root, boot in android, restart and then flash cwm 5.0.2.6. fix and reboot as normal if you get bootloop (strange case) do the 3 wipes
Click to expand...
Click to collapse
yeah i have fresh stock and rooted
cwm same version as u mention but dnt know about fix
arshad522 said:
yeah i have fresh stock and rooted
cwm same version as u mention but dnt know about fix
Click to expand...
Click to collapse
I'll give you a hand, wait a minute ;l
Try to flash this one;
CWM 5.0.2.6. FIX
Viper The Ripper said:
I'll give you a hand, wait a minute ;l
Try to flash this one;
CWM 5.0.2.6. FIX
Click to expand...
Click to collapse
thnks is it tested in galaxy ace s5830
im worry to brick my device
arshad522 said:
thnks is it tested in galaxy ace s5830
im worry to brick my device
Click to expand...
Click to collapse
Changelog and original post by ketut.kumajaya:
http://forum.xda-developers.com/showpost.php?p=18178563&postcount=13
Download: http://forum.xda-developers.com/attachment.php?attachmentid=743333&d=1318051346
Sure! I tested it an I think all Galaxy Ace's member forum too xDDD
The best full fuctional non touch recovery for Galaxy Ace now a days (I thinl the only one)
You do not need Odin to flash CWM. You will need it for the stock ROM. After installation boot into the (stock) recovery and flash CWM there.
nikwen said:
You do not need Odin to flash CWM. You will need it for the stock ROM. After installation boot into the (stock) recovery and flash CWM there.
Click to expand...
Click to collapse
The links I've posted both are stock recovery flashble zips
Viper The Ripper said:
The links I've posted both are stock recovery flashble zips
Click to expand...
Click to collapse
ok thnks man
I got Bootloop in my friends Galaxy Mini. I formatted before in CWM Recovery everything that was possible to clean phone (ROM CM 10) and now i flash S5570XWKTH firmware (it's one single package) and phone gets Bootloop. Where can I find 3-files ROM for this phone? Or maybe there is other solution?
Go to recovery mode and wipe data cache
Sent from my Galaxy MINI
Phalcore said:
I got Bootloop in my friends Galaxy Mini. I formatted before in CWM Recovery everything that was possible to clean phone (ROM CM 10) and now i flash S5570XWKTH firmware (it's one single package) and phone gets Bootloop. Where can I find 3-files ROM for this phone? Or maybe there is other solution?
Click to expand...
Click to collapse
Stock recovery is also present on this phone and you have to wipe everything just as if you would be in CWM and flashing a custom ROM. So use the same button combination for recovery, wipe data, reboot.
It works, thanks!
Hi,
i want to flash any custom rom via recovery. I have unlocked c6903 with .108, i am using latest z1-lockeddualrecovery installed using towelroot method. Any flashing with twrp or philz cwm ends with success message, but when i reboot device it vibrate once only and stay with black screen. i tried to flash a lot of different roms, or just kernel only, for .108 (Z1_DooMLoRD_AdvStkKernel_FW-108_v05). Everything ends with black screen.
I am getting back with flashtool and ftf flash of original rom.
What i am doing bad??
Thanks a lot for reply.
that is recovery issue. choose another version of dualrecovery on NUT's site and reflash it.
not working
hi.. still not works..tried 2.8.15, 2.8.19, 2.8.20
i have rooted and installed recovery via installer, when rebooted to recovery, i wiped data/factory reset, then installed rom from zip, checked checksum and after reboot black screen. I tried to flash recovery after flashing rom but without change.
Everything on my GT-I8190N works except for the recovery. It used to work, then I flashed it with the stock rooted interface, and in this part I don't know if recovery worked, then I flashed it with Cycanogenmod and it installed the TWRP recovery, which would show the "Teamwin" screen and then reboot, until I stopped attempting to boot into recovery. Now I just flashed it with CWM and now it just sticks on the Samsung Galaxy S3 mini splash screen until the battery is removed if I attempt to go into recovery. I'd love any tips, because I can't install Glapps until this is resolved!
Fixed it, flashed the standard recovery, reset the phone and the cache from that, flashed TWRP and it worked.