Database Develop

System update problems

I was notified of a system update on my tablet today. Got it downloaded and started the update. About a third of the way through, the little android fellow keels over, dead, with the dreaded red exclamation.... Error. Tried the update a few times, all with the same result.
Anyone else having this problem with this update? Any suggestions?
I have to laugh every time I see the dead android... it's just a perfect icon for the situation.

Your tablet is fully stock? No root, no apps removed or frozen?

berndblb said:
Your tablet is fully stock? No root, no apps removed or frozen?
Click to expand...
Click to collapse
My baby is fully stock... no root, not unlocked. But come to think of it, I might have disabled a few of the apps. I'll look into that possibility. Thanks for the lead.
Updated: sorry... No go. The blue sphere still slows down and the droid drops dead.

I have rooted stock, and it's been a while since I've update firmware manually on stock that's rooted. I plain forgot how to do it. Can someone refresh my memory please? [emoji15]

loner. said:
I have rooted stock, and it's been a while since I've update firmware manually on stock that's rooted. I plain forgot how to do it. Can someone refresh my memory please? [emoji15]
Click to expand...
Click to collapse
Anyone?

loner. said:
I have rooted stock, and it's been a while since I've update firmware manually on stock that's rooted. I plain forgot how to do it. Can someone refresh my memory please? [emoji15]
Click to expand...
Click to collapse
loner. said:
Anyone?
Click to expand...
Click to collapse
You have to flash the stock recovery back and make sure all the bloatware that came with the rom is installed and not frozen.
The best way to go about this would be probably to flash sbdag's stock rooted rom, then flash the stock recovery from Droidbasement, then manually flash the firmware which you get from Asus downloads.
Not worth the trouble IMHO....

berndblb said:
You have to flash the stock recovery back and make sure all the bloatware that came with the rom is installed and not frozen.
The best way to go about this would be probably to flash sbdag's stock rooted rom, then flash the stock recovery from Droidbasement, then manually flash the firmware which you get from Asus downloads.
Not worth the trouble IMHO....
Click to expand...
Click to collapse
Manually flash is the part I forgot how to do... [emoji15]

loner. said:
Manually flash is the part I forgot how to do... [emoji15]
Click to expand...
Click to collapse
Download the firmware from Asus, unzip it once and copy that file to the root of your internal SD. You may have to reboot for the system to find it, but with stock recovery installed it should give you a notification.
That's how I remember it, but there was a lot of trouble for users trying to flash back to stock with the 4.2/4.3 update - don't quite remember, but I think those got solved when Droidbasement provided the flashable stock recovery.

berndblb said:
Download the firmware from Asus, unzip it once and copy that file to the root of your internal SD. You may have to reboot for the system to find it, but with stock recovery installed it should give you a notification.
That's how I remember it, but there was a lot of trouble for users trying to flash back to stock with the 4.2/4.3 update - don't quite remember, but I think those got solved when Droidbasement provided the flashable stock recovery.
Click to expand...
Click to collapse
I didn't see it in droid basement anymore as of yesterday. This last update is not just a file (ZIP) in a zip update it's the whole Rom.

loner. said:
I didn't see it in droid basement anymore as of yesterday. This last update is not just a file (ZIP) in a zip update it's the whole Rom.
Click to expand...
Click to collapse
It's right there???
http://droidbasement.com/db-blog/?p=3210

berndblb said:
It's right there???
http://droidbasement.com/db-blog/?p=3210
Click to expand...
Click to collapse
He had the 4.2 posted and I think I still have it on a sdcard somewhere. But the manual update is all I need to do. Have you looked at the new update?

loner. said:
He had the 4.2 posted and I think I still have it on a sdcard somewhere. But the manual update is all I need to do. Have you looked at the new update?
Click to expand...
Click to collapse
What I've seen so far is mainly complaints about worse battery drain than on 4.3 [emoji12]
Even the version number indicates it's a minor one... Better keep a nandroid [emoji41] [emoji2]

berndblb said:
What I've seen so far is mainly complaints about worse battery drain than on 4.3 [emoji12]
Even the version number indicates it's a minor one... Better keep a nandroid [emoji41] [emoji2]
Click to expand...
Click to collapse
Definitely [emoji3]
---------- Post added at 05:32 PM ---------- Previous post was at 05:22 PM ----------
Ah found the link.
http://droidbasement.com/asus/tf701t/stock/4.4.2/

Original problem ... solved.
My original post of the system update not "taking", has been solved.
I got the update from the Asus site, and manually updated my tablet. Thankfully, the little Android guy did not die this time.

[Resolved] Stuck in Download Mode after failed flash attempt.

Okay, so I finally decided to ditch AT&T and go full Paranoid (This is not my first flashing attempt with Android devices). Got the latest version, etc. Load into BootStrap and wipe everything. Go to install PA and for some reason I had neglected to tell my build.prop (ro.product.device/name) is supposed to be "jactivelteatt"/"jactivelteuc" and not "SN-M9009". So when I started the flash process, immediate error and now I'm stuck with a phone with no OS or bootloader and can not, for the life of me, find a ROM to flash with .MD5 or .TAR that will work with ODIN. I did find "Oneclick_I537UCUAMF1" that gets all the way to the end and fails. Tried multiple times with multiple cables.
Please if anyone has any idea's, please help.

timmytron said:
Okay, so I finally decided to ditch AT&T and go full Paranoid (This is not my first flashing attempt with Android devices). Got the latest version, etc. Load into BootStrap and wipe everything. Go to install PA and for some reason I had neglected to tell my build.prop (ro.product.device/name) is supposed to be "jactivelteatt"/"jactivelteuc" and not "SN-M9009". So when I started the flash process, immediate error and now I'm stuck with a phone with no OS or bootloader and can not, for the life of me, find a ROM to flash with .MD5 or .TAR that will work with ODIN. I did find "Oneclick_I537UCUAMF1" that gets all the way to the end and fails. Tried multiple times with multiple cables.
Please if anyone has any idea's, please help.
Click to expand...
Click to collapse
Oh god are you on the US version (SGH-I537)? If you're on the international version (I9295) ignore this post but otherwise, you need to read and take in my short rant. Trust me I wish this weren't the case, but it is, and it's important:
The Galaxy S4 Active i537 has a locked bootloader. There is no way around this, no ifs ands or buts. You simply cannot flash custom ROMs or recoveries. That's it, end of story as far as CM, CWM, AOSP and such things are concerned. That being said there is a sort of recovery called SafeStrap which you can use to make nandroid backups, flash mods and STOCK-BASED roms, but it's not a true custom recovery in the sense that we had been used to, because of this locked bootloader nightmare.
OK so I think you're gonna want to check out this thread. It's all about how to install any firmware from download mode, I think you're gonna have to go with NE3 or NH3.
Let me reiterate. NO CUSTOM ROMS. NO CWM. No Paranoid, no cyanogenmod, no AOSP, no crossing go before going directly to jail. Sorry for the stupid joke but seriously, you have got to keep your phone on stock-based roms (of which there are unfortunately few).
Firmware download links

timmytron said:
Okay, so I finally decided to ditch AT&T and go full Paranoid (This is not my first flashing attempt with Android devices). Got the latest version, etc. Load into BootStrap and wipe everything. Go to install PA and for some reason I had neglected to tell my build.prop (ro.product.device/name) is supposed to be "jactivelteatt"/"jactivelteuc" and not "SN-M9009". So when I started the flash process, immediate error and now I'm stuck with a phone with no OS or bootloader and can not, for the life of me, find a ROM to flash with .MD5 or .TAR that will work with ODIN. I did find "Oneclick_I537UCUAMF1" that gets all the way to the end and fails. Tried multiple times with multiple cables.
Please if anyone has any idea's, please help.
Click to expand...
Click to collapse
What phone do you have (i537 or i9295) and what version of firmware were you on?

Devo7v said:
What phone do you have (i537 or i9295) and what version of firmware were you on?
Click to expand...
Click to collapse
i537 and second to last, I537UCUCNE3

Okay, :laugh: I'm back. FINALLY found some MD5 files that loaded. In the process of updating and putting things back they way they were. Thank you to all who viewed/helped!
Is there a way to mark this as "Resolved"?

Web browser login, edit, advanced.
Add "solved" to title?

same problem with my i537, need help
timmytron said:
Okay, :laugh: I'm back. FINALLY found some MD5 files that loaded. In the process of updating and putting things back they way they were. Thank you to all who viewed/helped!
Is there a way to mark this as "Resolved"?
Click to expand...
Click to collapse
Need help, having the same problem

baddhabbitz88 said:
Need help, having the same problem
Click to expand...
Click to collapse
Have you used ODIN before?

i537 Stuck in download mode
timmytron said:
Have you used ODIN before?
Click to expand...
Click to collapse
yes I have use odin but I think I have the same issue you did, need to know where to get the files .

baddhabbitz88 said:
yes I have use odin but I think I have the same issue you did, need to know where to get the files .
Click to expand...
Click to collapse
Okay. Well I'm not sure where I got the files either. What I'm going to do is upload them (please do keep in mind that it's a huge file) to my Drive account and I will link it here when complete. You are on the AT&T i537 version?

baddhabbitz88 said:
yes I have use odin but I think I have the same issue you did, need to know where to get the files .
Click to expand...
Click to collapse
Did you get my PM?

timmytron said:
Okay. Well I'm not sure where I got the files either. What I'm going to do is upload them (please do keep in mind that it's a huge file) to my Drive account and I will link it here when complete. You are on the AT&T i537 version?
Click to expand...
Click to collapse
Yes, the at&t version i537 is the one I'm. Found some files this morning and run them in Odin but now back at bootloop. I'll check your files and see whats up on that end. It sucks because have not done anything to this phone unlike my other ones and this crap starts with this one on its own.

baddhabbitz88 said:
Yes, the at&t version i537 is the one I'm. Found some files this morning and run them in Odin but now back at bootloop. I'll check your files and see whats up on that end. It sucks because have not done anything to this phone unlike my other ones and this crap starts with this one on its own.
Click to expand...
Click to collapse
Well AT&T decided to completely lock us out on this particular version on this particular phone. At least we have *ROOT*.

baddhabbitz88 said:
Yes, the at&t version i537 is the one I'm. Found some files this morning and run them in Odin but now back at bootloop. I'll check your files and see whats up on that end. It sucks because have not done anything to this phone unlike my other ones and this crap starts with this one on its own.
Click to expand...
Click to collapse
You need to make sure you are flashing a version that is the same or more recent than the version you are currently on. You cannot downgrade your firmware or else you'll end up with a bootloop.

Devo7v said:
You need to make sure you are flashing a version that is the same or more recent than the version you are currently on. You cannot downgrade your firmware or else you'll end up with a bootloop.
Click to expand...
Click to collapse
k will try to find a more updated version but that is part of the problem is locating the firmware I need + this started doing it on its own and really never dug into it to no which firmware was on it other than rooted months ago with towelroot
---------- Post added at 09:36 PM ---------- Previous post was at 09:04 PM ----------
timmytron said:
Did you get my PM?
Click to expand...
Click to collapse
yeah I got it thanks but it didn't work still digging

baddhabbitz88 said:
k will try to find a more updated version but that is part of the problem is locating the firmware I need + this started doing it on its own and really never dug into it to no which firmware was on it other than rooted months ago with towelroot
---------- Post added at 09:36 PM ---------- Previous post was at 09:04 PM ----------
yeah I got it thanks but it didn't work still digging
Click to expand...
Click to collapse
Always check the stickies.
http://forum.xda-developers.com/showthread.php?t=2892445

New OTA: G920TUVS4EPH2

Got this OTA after doing an ODIN of EPF1 to my phone. Baseband is updated to match, unsure about bootloader but I doubt it. If someone wants a ROM dump and is willing to tell me how....

I got this update pushed to me also.
Question for anyone who knows: If you flash this do you lose the ability to install custom low level software (firmware, recoveries, etc)?

elroy253 said:
I got this update pushed to me also.
Question for anyone who knows: If you flash this do you lose the ability to install custom low level software (firmware, recoveries, etc)?
Click to expand...
Click to collapse
I didn't. I haven't tried downgrading but I flashed recovery after it updated. The one thing I have noticed is that wanam xposed/firefds kit has some functions that don't work or change anything...

Ugh, just got my S6 back from repair and they installed this update. Is it possible to root?

EncryptedCurse said:
Ugh, just got my S6 back from repair and they installed this update. Is it possible to root?
Click to expand...
Click to collapse
It's possible, our S6 won't get locked on any 6.0 firmware's
Maybe on 7.0 if we get it. but not 6.0
And for clarification EPH2 was just security fixes.. everything else is still the same.

Maqical said:
It's possible, our S6 won't get locked on any 6.0 firmware's
Maybe on 7.0 if we get it. but not 6.0
And for clarification EPH2 was just security fixes.. everything else is still the same.
Click to expand...
Click to collapse
OK, thanks — how should I go about doing this? I've always used CF Auto Root, but it doesn't seem updated yet.

I guess until further notice using Smart Switch as a lazy way to recover from my own stupidity is out

EncryptedCurse said:
OK, thanks — how should I go about doing this? I've always used CF Auto Root, but it doesn't seem updated yet.
Click to expand...
Click to collapse
http://forum.xda-developers.com/tmo...l/how-to-flash-marshmallow-update-sm-t3362983
This guide will help you with all of it, just change the "the rom" part to whatever 6.0 rom you decide you want to use instead.

I'm downloading the complete TAR image from Sammobile, but due to finances I don't have the means to pay for the full speed..
So I'm downloading at the slow method.. If someone else has not uploaded the image, I will upload it by late tonite..

I'm still having issues with the damn Upload it gives me last second errors when I step away to do another task..
I'm making my final attempt to upload it onto my Android File Host... It should be up by morning if it uploads correctly.. Just Look For Zaphodspeaks in Android File Host if I haven't posted it yet..
I have many tasks to do this week ends.. Mainly upkeep the the old house and updating some of the old wiring while its getting cooler..

Finally, I uploaded the Image.. I had to recompress it since it kept giving me errors at the very end, just unzip and install in ODIN
https://www.androidfilehost.com/?fid=24651430732237823

Got my phone rooted, custom rom, and kernel that I was using before, no problem.

Last night (9/27) I got a firmware update for my factory USA unlocked 920T. Sammobile shows it was released on 9/26. It was a 50MB file that updated the Android secruity patch date to Sept. 1. No other changes. I noticed the Samsung Smart Manager app/widget shows I'm using 5% less memory now. I don't know if it's better RAM management or Samsung modified the app/widget to show different figures LOL. I suspect the t-mobile 920T will get the update soon.

JustZaphod said:
Finally, I uploaded the Image.. I had to recompress it since it kept giving me errors at the very end, just unzip and install in ODIN
https://www.androidfilehost.com/?fid=24651430732237823
Click to expand...
Click to collapse
Thanks!!

RFrancis said:
Thanks!!
Click to expand...
Click to collapse
At least someone replied.. It only took a month..
It looks like everyone abandoned ship and went to the S7

JustZaphod said:
Finally, I uploaded the Image.. I had to recompress it since it kept giving me errors at the very end, just unzip and install in ODIN
https://www.androidfilehost.com/?fid=24651430732237823
Click to expand...
Click to collapse
JustZaphod said:
At least someone replied.. It only took a month..
It looks like everyone abandoned ship and went to the S7
Click to expand...
Click to collapse
Only a month? Record time there...

JustZaphod said:
Finally, I uploaded the Image.. I had to recompress it since it kept giving me errors at the very end, just unzip and install in ODIN
https://www.androidfilehost.com/?fid=24651430732237823
Click to expand...
Click to collapse
thanks

Hortisimo said:
thanks
Click to expand...
Click to collapse
Thank me by hitting the Thanks Thumbs up!

JustZaphod said:
Thank me by hitting the Thanks Thumbs up!
Click to expand...
Click to collapse
already did

Was wondering if a kind person could deodex this new update? for some reason i cannot install ubuntu on my pc to get it done right.Thanks

MM Update (QI2) - TWRP Won't Install!!!

Hi,
I just got this phone (same phone I had to replace the one that died)::
Samsung Galaxy (SM-N910T) Note 4 (QualComm)
Marshmallow 6.0.1
It's Unlocked.
Anyway, before I could install TWRP so I could Root it, Android Firmware Updates started coming through. I figured let them install and that way I'd have them. I knew that if I tried to install them after installing TWRP, it would just replace TWRP anyway.
After the last Update, the Build is now...
Build #: MMB29M.N910T3UVU3EQI2
I have tried TWRP 3.0.2.0 & 2.8.7.0 and even PhilZ 6.59.0 but nothing will go on! Odin (latest and tried older one) starts to Flash it, it says "Recovery" and then it says, "FAIL".
I'm thinking it's gotta have something to do with the Updates to Marshmallow???
PLEASE HELP! I can't do anything that I need to do without it Rooted and I can't Root it without a Custom Recovery.
Thanks!
Dave

Zeuszoos said:
Hi,
I just got this phone (same phone I had to replace the one that died)::
Samsung Galaxy (SM-N910T) Note 4 (QualComm)
Marshmallow 6.0.1
It's Unlocked.
Anyway, before I could install TWRP so I could Root it, Android Firmware Updates started coming through. I figured let them install and that way I'd have them. I knew that if I tried to install them after installing TWRP, it would just replace TWRP anyway.
After the last Update, the Build is now...
Build #: MMB29M.N910T3UVU3EQI2
I have tried TWRP 3.0.2.0 & 2.8.7.0 and even PhilZ 6.59.0 but nothing will go on! Odin (latest and tried older one) starts to Flash it, it says "Recovery" and then it says, "FAIL".
I'm thinking it's gotta have something to do with the Updates to Marshmallow???
PLEASE HELP! I can't do anything that I need to do without it Rooted and I can't Root it without a Custom Recovery.
Thanks!
Dave
Click to expand...
Click to collapse
From what I know, the bootloader isn't locked but I recommend installing a KitKat bootloader Using this thread
https://forum.xda-developers.com/no...ws-want-to-downgrade-to-4-4-4-kitkat-t3447773
From there you can install TWRP and/or update to qg1, qe2, or older.

dottyparent said:
From what I know, the bootloader isn't locked but I recommend installing a KitKat bootloader Using this thread
https://forum.xda-developers.com/no...ws-want-to-downgrade-to-4-4-4-kitkat-t3447773
From there you can install TWRP and/or update to qg1, qe2, or older.
Click to expand...
Click to collapse
First, thank you for responding!
I used that page on my last Note 4 (it died, hardware failure), after I tried MM but hated the Ext SD handling and so I went back down to the T2 KK ROM on that page and it worked fine (I installed the entire ROM). But my replacement Note 4 that just arrived already had MM as I said and updated to a Build # I haven't seen.
But if you look at the Build #, T-Mobile seems to have (via the Updates) turned the phone into a "N910T3" instead of a "N910T". Weird! Especially since I'm with MetroPCS. Hahaha! They're owned by T-Mobile though, use the same Towers, etc..
Anyway, I'd like to try and stick with MM this time around.
But you did hit one of my grey areas.
Let me see if I understand you correctly... If I were to Flash just the KK BL, my phone would/would not continue to Boot into Marshmallow as it is now, if I Flashed nothing but that?
Or am I correct in saying that your method would mean taking the phone back, so that it would be running KitKat and then going back up to Marshmallow using a different ROM that TWRP will be able to go onto?
The reason I'm fuzzy, is because I've never Flashed just a BootLoader, so I'm not sure what would happen if I Flash just the KK BootLoader onto an MM ROM and Reboot???
Thank you again for your time!

Zeuszoos said:
First, thank you for responding!
I used that page on my last Note 4 (it died, hardware failure), after I tried MM but hated the Ext SD handling and so I went back down to the T2 KK ROM on that page and it worked fine (I installed the entire ROM). But my replacement Note 4 that just arrived already had MM as I said and updated to a Build # I haven't seen.
But if you look at the Build #, T-Mobile seems to have (via the Updates) turned the phone into a "N910T3" instead of a "N910T". Weird! Especially since I'm with MetroPCS. Hahaha! They're owned by T-Mobile though, use the same Towers, etc..
Anyway, I'd like to try and stick with MM this time around.
But you did hit one of my grey areas.
Let me see if I understand you correctly... If I were to Flash just the KK BL, my phone would/would not continue to Boot into Marshmallow as it is now, if I Flashed nothing but that?
Or am I correct in saying that your method would mean taking the phone back, so that it would be running KitKat and then going back up to Marshmallow using a different ROM that TWRP will be able to go onto?
The reason I'm fuzzy, is because I've never Flashed just a BootLoader, so I'm not sure what would happen if I Flash just the KK BootLoader onto an MM ROM and Reboot???
Thank you again for your time!
Click to expand...
Click to collapse
This method will turn your phone temporarily to a t2, of which a mm Rom will not boot. Since your goal is to have TWRP on a MM Rom, I would do the following:
1. Flash the t2 KK bootloader.
2. Find your appropriate KK bootloader (ie if you have a 910t find a 910t bootloader) and flash it
3. Flash TWRP
4. Flash a MM bootloader and modem.

dottyparent said:
This method will turn your phone temporarily to a t2, of which a mm Rom will not boot. Since your goal is to have TWRP on a MM Rom, I would do the following:
1. Flash the t2 KK bootloader.
2. Find your appropriate KK bootloader (ie if you have a 910t find a 910t bootloader) and flash it
3. Flash TWRP
4. Flash a MM bootloader and modem.
Click to expand...
Click to collapse
Is this a method you've tried B4?
I'll check out that thread and see if they've got an MM Modem too.
Isn't that the "EFS" part of a ROM? If so, there are EFS Backup apps. But they may require Root though.
TTYL

Zeuszoos said:
Is this a method you've tried B4?
I'll check out that thread and see if they've got an MM Modem too.
Isn't that the "EFS" part of a ROM? If so, there are EFS Backup apps. But they may require Root though.
TTYL
Click to expand...
Click to collapse
Yes I have tried this. I changed my phone from a trip to a t2 and back again.

dottyparent said:
This method will turn your phone temporarily to a t2, of which a mm Rom will not boot. Since your goal is to have TWRP on a MM Rom, I would do the following:
1. Flash the t2 KK bootloader.
2. Find your appropriate KK bootloader (ie if you have a 910t find a 910t bootloader) and flash it
3. Flash TWRP
4. Flash a MM bootloader and modem.
Click to expand...
Click to collapse
dottyparent said:
Yes I have tried this. I changed my phone from a trip to a t2 and back again.
Click to expand...
Click to collapse
There is an MM ROM that is Rooted and has TWRP built in, but I don't know if it would Flash over this with Odin or not
I am also considering trying the entire KK T2 ROM again to go down to KK and then Flashing that MM ROM.
It has both Odexed & DeOdexed. If I remember right, DeOdexed is the better choice, right?
Thanks for all your time and help!
Dave

Hi,
You know what's sad, is that if I could somehow Roog it without TWRP, then I could use the way awesome "Flashify" app to try to get TWRP on this phone! <lol>
Dave

dottyparent said:
From what I know, the bootloader isn't locked but I recommend installing a KitKat bootloader Using this thread
https://forum.xda-developers.com/no...ws-want-to-downgrade-to-4-4-4-kitkat-t3447773
From there you can install TWRP and/or update to qg1, qe2, or older.
Click to expand...
Click to collapse
dottyparent said:
Yes I have tried this. I changed my phone from a trip to a t2 and back again.
Click to expand...
Click to collapse
Could you please tell me where the files are that you used, so that I can have the exact same ones to work with? I looked at the link you provided, but I couldn't find just the BootLoader in it. I saw where someone requested just the BootLoader and Modem (you?) and "Trex888" said he would upload them right away and provide a link, but I did not see one ever posted. Just the link for the entire ROM.
Btw, in Odin, if you're Flashing only the BootLoader, do you use the "BL" button instead of the "AP" (formerly "PDA") button? What about just the Modem (thru Recovery?)?
I just tried Flashing the entire T2 KK ROM that I had used to go back from MM to KK on my first Note 4, but this one wouldn't take that either. It immediately said "FAIL".
I'm sorry if I'm a pain. It's just that I'm disabled and constantly laying on my side, so a laptop is out for regular use and so this phone is my main and only communication with the outside world. What I'm saying is that it's not a hobby phone and I have to get it right, because (see below). So I don't want to Flash something that may not do it, so I want to exactly match what you did.
You see, I can only sit up to Flash from Odin on my Windows computer with my phone cabled to it for just so long because of my condition.
Not your problem, I know. But I'm explaining it to you so that you can understand that I'm not just trying to be lazy. But instead, I need to make sure I do exactly what worked for you, with exactly those files, because if something goes wrong, it could take me days of short time computer access due to my situation (too much overwhelming pain) to figure it out and get it (hopefully) fixed. So you can see the importance, no doubt.
This phone right now (see Build #) says it's a T3, but whatever works.
Right now, it's without Recovery so I can't Root it, so I can't get Write access to my Ext SD, etc.. I need to Root!
Also, this T3 MM ROM is having issues with the Display. Sometimes it'll get all chopped up and I have to Reboot.
So anyway, I need to get this done and I would very much appreciate your further help!
Thank You!!!
Dave

Zeuszoos said:
Could you please tell me where the files are that you used, so that I can have the exact same ones to work with? I looked at the link you provided, but I couldn't find just the BootLoader in it. I saw where someone requested just the BootLoader and Modem (you?) and "Trex888" said he would upload them right away and provide a link, but I did not see one ever posted. Just the link for the entire ROM.
Btw, in Odin, if you're Flashing only the BootLoader, do you use the "BL" button instead of the "AP" (formerly "PDA") button? What about just the Modem (thru Recovery?)?
I just tried Flashing the entire T2 KK ROM that I had used to go back from MM to KK on my first Note 4, but this one wouldn't take that either. It immediately said "FAIL".
I'm sorry if I'm a pain. It's just that I'm disabled and constantly laying on my side, so a laptop is out for regular use and so this phone is my main and only communication with the outside world. What I'm saying is that it's not a hobby phone and I have to get it right, because (see below). So I don't want to Flash something that may not do it, so I want to exactly match what you did.
You see, I can only sit up to Flash from Odin on my Windows computer with my phone cabled to it for just so long because of my condition.
Not your problem, I know. But I'm explaining it to you so that you can understand that I'm not just trying to be lazy. But instead, I need to make sure I do exactly what worked for you, with exactly those files, because if something goes wrong, it could take me days of short time computer access due to my situation (too much overwhelming pain) to figure it out and get it (hopefully) fixed. So you can see the importance, no doubt.
This phone right now (see Build #) says it's a T3, but whatever works.
Right now, it's without Recovery so I can't Root it, so I can't get Write access to my Ext SD, etc.. I need to Root!
Also, this T3 MM ROM is having issues with the Display. Sometimes it'll get all chopped up and I have to Reboot.
So anyway, I need to get this done and I would very much appreciate your further help!
Thank You!!!
Dave
Click to expand...
Click to collapse
Okay. Here is what I did exactly.
Download my Files here: https://1drv.ms/f/s!AJEa3D0cBAhIbQ
Stock 910T files here https://androidfilehost.com/?w=files&flid=20602
i guess if you need any other stock files sammobile works.
This will reset your phone!
1) Odin flash the AOG1 file. this turns the phone into a t2 phone.
2) Odin the ANK4 rom. this returns the phone to a 910t.
3) Boot into the ANK4 rom and download the MM update. This should land you on the first MM update, EPE3
4) Flash TWRP, thourgh AP, which should work. Might as well flash superSU or magisk.
At this point i would wipe everything and install a custom rom, but you could update to a newer boot loader and modem using the BL and CP buttons, respectively.
hope this helps

dottyparent said:
Okay. Here is what I did exactly.
Download my Files here: https://1drv.ms/f/s!AJEa3D0cBAhIbQ
Stock 910T files here https://androidfilehost.com/?w=files&flid=20602
i guess if you need any other stock files sammobile works.
This will reset your phone!
1) Odin flash the AOG1 file. this turns the phone into a t2 phone.
2) Odin the ANK4 rom. this returns the phone to a 910t.
3) Boot into the ANK4 rom and download the MM update. This should land you on the first MM update, EPE3
4) Flash TWRP, thourgh AP, which should work. Might as well flash superSU or magisk.
At this point i would wipe everything and install a custom rom, but you could update to a newer boot loader and modem using the BL and CP buttons, respectively.
hope this helps
Click to expand...
Click to collapse
Thank you for responding!
The OG1 is the T2 ROM that I had just tried and reported that unlike my previous Note 4, it would not Flash on this one to turn it into a KK T2. I also tried the other 2 ROMS to no avail.
I think it's because this one says it's a T3.
Thanks,
Dave

Zeuszoos said:
Thank you for responding!
The OG1 is the T2 ROM that I had just tried and reported that unlike my previous Note 4, it would not Flash on this one to turn it into a KK T2. I also tried the other 2 ROMS to no avail.
I think it's because this one says it's a T3.
Thanks,
Dave
Click to expand...
Click to collapse
I'm sorry man I did everything that I could think of. I knew that the T3 had a few issues with bootloaders and downgrading and stuff, but wow, i didn't know about these issues. Good luck with trying something else then.

dottyparent said:
I'm sorry man I did everything that I could think of. I knew that the T3 had a few issues with bootloaders and downgrading and stuff, but wow, i didn't know about these issues. Good luck with trying something else then.
Click to expand...
Click to collapse
No, I'm sorry, but you have to give me the answer.
All seriousness aside, I depreciate all your effort.
I can only think of one thing left to try... Go to Sammy's site and get the Lollipop 5.1.1 ROM and see what happens. It can't hurt to try, right?
I'll let ya know what happens and thank you again!
Happy Thanksgiving!
Dave

dottyparent said:
I'm sorry man I did everything that I could think of. I knew that the T3 had a few issues with bootloaders and downgrading and stuff, but wow, i didn't know about these issues. Good luck with trying something else then.
Click to expand...
Click to collapse
Guess what? I decided to take a picture of my phone's screen after it Failed to let me Flash anything at all in Odin. I tried TWRP again and this time read what my phone responds with and it says the following:
Custom Binary (Recovery) Blocked By FRP LOCK
Does that mean anything to you?
TTYL

Zeuszoos said:
Guess what? I decided to take a picture of my phone's screen after it Failed to let me Flash anything at all in Odin. I tried TWRP again and this time read what my phone responds with and it says the following:
Custom Binary (Recovery) Blocked By FRP LOCK
Does that mean anything to you?
TTYL
Click to expand...
Click to collapse
Well I searched around XDA and it seems to be a problem exclusive to the T3. Try going to settings -> security and see if there is a option to disable resetting protection. Or see if there is a way to disable OEM locking. However it's probably not there. The only successful thread I found was this
https://forum.xda-developers.com/note-4/help/note-4-t-mobile-sm-n910t3-custom-binary-t3346840
---------- Post added at 07:28 PM ---------- Previous post was at 07:24 PM ----------
If all else doesn't work, perhaps you could repartition your phone. You need a pit file and a few ROMs

Zeuszoos said:
Hi,
I just got this phone (same phone I had to replace the one that died)::
Samsung Galaxy (SM-N910T) Note 4 (QualComm)
Marshmallow 6.0.1
It's Unlocked.
Anyway, before I could install TWRP so I could Root it, Android Firmware Updates started coming through. I figured let them install and that way I'd have them. I knew that if I tried to install them after installing TWRP, it would just replace TWRP anyway.
After the last Update, the Build is now...
Build #: MMB29M.N910T3UVU3EQI2
I have tried TWRP 3.0.2.0 & 2.8.7.0 and even PhilZ 6.59.0 but nothing will go on! Odin (latest and tried older one) starts to Flash it, it says "Recovery" and then it says, "FAIL".
I'm thinking it's gotta have something to do with the Updates to Marshmallow???
PLEASE HELP! I can't do anything that I need to do without it Rooted and I can't Root it without a Custom Recovery.
Thanks!
Dave
Click to expand...
Click to collapse
That's weird. I updated my N910T to EQI2 with Odin, rooted using CF-Auto-Root for N910T and then flashed TWRP 3.1.1 and I had no problems at all

dottyparent said:
I'm sorry man I did everything that I could think of. I knew that the T3 had a few issues with bootloaders and downgrading and stuff, but wow, i didn't know about these issues. Good luck with trying something else then.
Click to expand...
Click to collapse
ShaDisNX255 said:
That's weird. I updated my N910T to EQI2 with Odin, rooted using CF-Auto-Root for N910T and then flashed TWRP 3.1.1 and I had no problems at all
Click to expand...
Click to collapse
But you updated to it. From KK?
KK doesn't have it and it's not in downloadable ROMS.
But if MM is already on the phone (mine), then it has FRP. See my other response.
TTYL

Zeuszoos said:
But you updated to it. From KK?
KK doesn't have it and it's not in downloadable ROMS.
But if MM is already on the phone (mine), then it has FRP. See my other response.
TTYL
Click to expand...
Click to collapse
That's because I have a n910t not a t3

Zeuszoos said:
But you updated to it. From KK?
KK doesn't have it and it's not in downloadable ROMS.
But if MM is already on the phone (mine), then it has FRP. See my other response.
TTYL
Click to expand...
Click to collapse
I upgraded from LL. The device was running 5.0.1 and now has 6.0.1

dottyparent said:
Well I searched around XDA and it seems to be a problem exclusive to the T3. Try going to settings -> security and see if there is a option to disable resetting protection. Or see if there is a way to disable OEM locking. However it's probably not there. The only successful thread I found was this
https://forum.xda-developers.com/note-4/help/note-4-t-mobile-sm-n910t3-custom-binary-t3346840
---------- Post added at 07:28 PM ---------- Previous post was at 07:24 PM ----------
If all else doesn't work, perhaps you could repartition your phone. You need a pit file and a few ROMs
Click to expand...
Click to collapse
Thank you for looking! I found out what it is.
It's "Factory Reset Protection" (FRP)
What it does, is keep someone else from Factory Resseting your phone if they steal it. When they reset it, during setup, they have to type in the last Google Email and Password that the phone used, before they can set up theirs.
After reading that, I remembered having to put my Google Info in at two separate points and seeing it telling me to "Verify", but I was just blowing right through setup, not reading all of the small print. I mean hey, I had no idea that even existed and was just annoyed that I had to type the same thing twice!
It will only be found on phones that already have Lollipop and up on them out of the box and probably not all of them yet. And you don't have to worry about downloadable ROMS, so those who have phones that started with KitKat, or even early versions of Marshmallow 6.0 or 6.0.1 would not have seen this happen to them. Even those who updated to the same version of Mm that my phone has won't, if they started with KK or an older MM and then updated to it.
Again, this is something that your phone would have "Out of the Box" and the phone (not all) would have at least L on it.
Just FYI, it's not just Samsung, either.
Just FYI, I have confirmed this info. It is a fact.
Once I have an easy to do, working fix, hopefully without having to perform a Factory Reset, I will "Create A Thread" and as normal for me, write clear and easy, step by step (not leaving any out) instructions on how to "Unlock FRP" and then come back here and post a link to the thread. Hopefully this week.
This phone will not beat me!!!
TTYL
Dave

FW-8.0.0] S7 EDGE SNAPDRAGON - UNIVERSAL OREO G935UUES4CRG3 July 1/2018 sec

I Downloaded The Fw From Sammobile, Yes Its Was Very Slow, Thats Why I Re-upped It Untouched To Androidfilehost, Much Faster To Dl For Others.
Only For Snapdragon Variants, Its The Universal Firmware, Its Free Of Carrier Bloat But Has Some Samsung Useless Apps.
Not For Exynos Variants Like The Sm-g935f, Etc.
MORE ABOUT UNIVERSAL FW READ THIS
The Zip Has The Att Extension But All Universal Snapdragon Fw Are The Same Afaik, It Does Not Install Anything Specific For Att,
Im On Telus/koodo Using The Sm-g935a Without Issues, Shows Lte Signal When On Data Mode.
Idk If Auto Updates Work, Although Update Options Are Available From The System Menu
Instructions:
Dl Zip, Extract Zip, Put Phone In Dl/odin Mode. Run Odin As Admin, And Load Each Cp, Ap, Bl And Csc(Dont Use The Home Csc As I Read Its Fracks Things Up), Just Use "Csc_oym" File In Odin
Fyi. I Used Princes Odin But Failed, Used Untouched Odin And It Flashed Successfully. Was On Nougat 7.0 Sim Unlocked SM-G935A At&t Branded Stock Fw. I Included Both For Your Pleasure.
Afaik It Will Wipe Your Phone, Do A Backup As Needed
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time
Disclaimer, Im Not Responsible For What You Do To Your Phones
G935UUES4CRG3_G935UOYM4CRG3_ATT.zip - 2.9GB
Odin3_v3.13.1.zip
Odin3+v3.12+(PrinceComsy).zip - not working with this fw

does wifi calling work this way or no bc its the unlocked version primarily?

Hi , can you confirm if this has no issue? im planning to flash my rom into oreo as well. thanks for sharing this.

Misslys9 said:
does wifi calling work this way or no bc its the unlocked version primarily?
Click to expand...
Click to collapse
rhayann77 said:
Hi , can you confirm if this has no issue? im planning to flash my rom into oreo as well. thanks for sharing this.
Click to expand...
Click to collapse
most answers to questions are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS

vincom said:
answers, if any, are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS
Click to expand...
Click to collapse
Hi Vincom, yes i have already read the article. the main reason im flashing the rom is because of the hidden DATA icon in the toggle screen. and also i want my phone to have the OREO update as well. this is my first samsung phone. i have experience in flashing ROMs in my xiaomi redmi 1s phone. so im a bit skeptical if i can do this on my own. this odin process is very new to me. so what is the worst thing that can happen it i brick my phone? can i do a hard reset and will it default to the stock AT&T ROM if ever?

rhayann77 said:
Hi Vincom, yes i have already read the article. the main reason im flashing the rom is because of the hidden DATA icon in the toggle screen. and also i want my phone to have the OREO update as well. this is my first samsung phone. i have experience in flashing ROMs in my xiaomi redmi 1s phone. so im a bit skeptical if i can do this on my own. this odin process is very new to me. so what is the worst thing that can happen it i brick my phone? can i do a hard reset and will it default to the stock AT&T ROM if ever?
Click to expand...
Click to collapse
odin is as easy as it gets, its made for samsung phones.
safe is to do nothing if ur happy as is.
NEVER EVER USE THE "PIT" OPTION UNLESS DIRECTIONS SAY SO IN XDA FORUM ONLY
read/watch vids on using odin
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time

vincom said:
odin is as easy as it gets, its made for samsung phones.
safe is to do nothing if ur happy as is.
read/watch vids on using odin
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time
Click to expand...
Click to collapse
Thanks again, ill watch some youtube videos first and if i feel confident enough then i will go thru with this. will keep you posted.
---------- Post added at 09:58 AM ---------- Previous post was at 09:36 AM ----------
rhayann77 said:
Thanks again, ill watch some youtube videos first and if i feel confident enough then i will go thru with this. will keep you posted.
Click to expand...
Click to collapse
Vincom, by the way this Oreo update has nothing to do with my CSC right? i just check its G935AATT4BQK2. my device model is SM-935A

rhayann77 said:
Vincom, by the way this Oreo update has nothing to do with my CSC right? i just check its G935AATT4BQK2. my device model is SM-935A
Click to expand...
Click to collapse
yes and no, csc controls what bloatware and which settings are setup by default dependant on carrier and country, hence why this is a universal fw and not dependant on original csc files.
if u truly have the att s7edge g935a, which is what i had, then yes.

vincom said:
yes and no, csc controls what bloatware and which settings are setup by default dependant on carrier and country, hence why this is a universal fw and not dependant on original csc files.
if u truly have the att s7edge g935a, which is what i had, then yes.
Click to expand...
Click to collapse
Thanks for the clarification. the download path keeps on failing on me for some reason. i already downloaded 1.8G or maybe its my internet speed perhaps?

rhayann77 said:
Thanks for the clarification. the download path keeps on failing on me for some reason. i already downloaded 1.8G or maybe its my internet speed perhaps?
Click to expand...
Click to collapse
could be android file host is having issues today
or u can try ur luck with sammobile.com which is where i initially got the file
edit. ya, i just tried, issues on their end

vincom said:
could be android file host is having issues today
or u can try ur luck with sammobile.com which is where i initially got the file
edit. ya, i just tried, issues on their end
Click to expand...
Click to collapse
i finally finished downloading the zip file earlier. i will flash it later after i go home from work. and one other thing i need to make sure. with this Oreo rom, the DATA connection icon will be available in the toggle screen right?

@vincom, this Oreo rom has already the DATA icon to be toggled on/off right? this is one of the reason i want to flash the att rom as well.

vincom said:
most answers to questions are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS
Click to expand...
Click to collapse
I did read all of it but your description was vague on the att part so I didnt know if you modified it which it sounds like its just the 935u firmware and Im not a newb n00b

@vincom, initially got an error sha256 when i started to flash it. and my phone started to boot loop after i use a different odin, the prince odin. but after some searching. i fount out i just need to use the newer patch version of odin - Odin3 v3.13.1_3B_PatcheD and now im running Oreo on my s7 edge. hopefully this can help others too.

rhayann77 said:
@vincom, initially got an error sha256 when i started to flash it. and my phone started to boot loop after i use a different odin, the prince odin. but after some searching. i fount out i just need to use the newer patch version of odin - Odin3 v3.13.1_3B_PatcheD and now im running Oreo on my s7 edge. hopefully this can help others too.
Click to expand...
Click to collapse
did u try the one i have in the op, Odin3_v3.13.1.zip

vincom said:
did u try the one i have in the op, Odin3_v3.13.1.zip
Click to expand...
Click to collapse
yup i tried that one the first time. thats when it gave me the error message sha256. then i tried the prince odin that gave me the error mmc something.

The author claims performance and battery improvements but has anyone that switched over really noticed that big of a improvement?
I mean i already disabled all the carrier bloat with adhell isn't that basically the same as installing this rom? Does the universal maybe have a different kernal/different system level tweaks?

Bro , what will happen if my unlocked at&t s7edge installing this ? Is there sim will be locked again or not ? Thanks in advance and sorry for my bad english...

Rifuki18 said:
Bro , what will happen if my unlocked at&t s7edge installing this ? Is there sim will be locked again or not ? Thanks in advance and sorry for my bad english...
Click to expand...
Click to collapse
will not change your current sim lock status, no fw exists that would change it

Thanks
Thanks a lot, this firmware works for me with the 3b patched odin on the first try.