Hi guys
So I want to flash a custom ROM called Noble ROM. According to this guide: http://galaxynote4root.com/t-mobile...te-5-ux-for-galaxy-note-4-always-on-screen/2/
I need to 6.0.1 bootloader and modem installed on my note 4.
So I downloaded the file on the site, now how do I flash it?
Never done this before, tried googling, but all the guides apparently have 2 files to flash, but I only have one zip file.
Thanks
IIf you're not already on the 6.0.1 firmware I would tecommend you download the entire 6.0.1 firmware and flash it.
You flash it with Odin, in Download/Bootloader mode. (Hold volume up+ home + power button until it starts and then press volume up)
I use 3.09 personally and that's what I would suggest as it worked for me. (You click the BL button and then select the .tar/.md5 file)
If you need the 6.0.1 firmware download link just ask
Also, check the files inside of the .zip
Usually the files are zipped up so they are smaller, there should be a .tar/.md5 file in there so then extract it and all
Andrew S.S. said:
IIf you're not already on the 6.0.1 firmware I would tecommend you download the entire 6.0.1 firmware and flash it.
You flash it with Odin, in Download/Bootloader mode. (Hold volume up+ home + power button until it starts and then press volume up)
I use 3.09 personally and that's what I would suggest as it worked for me. (You click the BL button and then select the .tar/.md5 file)
If you need the 6.0.1 firmware download link just ask
Also, check the files inside of the .zip
Usually the files are zipped up so they are smaller, there should be a .tar/.md5 file in there so then extract it and all
Click to expand...
Click to collapse
what if i just flashed pg2 stock firmware via odin using the Ap button? is it not the same?
Sent from my SM-N910T using XDA-Developers mobile app
Kenny243 said:
Hi guys
So I want to flash a custom ROM called Noble ROM. According to this guide: http://galaxynote4root.com/t-mobile...te-5-ux-for-galaxy-note-4-always-on-screen/2/
I need to 6.0.1 bootloader and modem installed on my note 4.
So I downloaded the file on the site, now how do I flash it?
Never done this before, tried googling, but all the guides apparently have 2 files to flash, but I only have one zip file.
Thanks
Click to expand...
Click to collapse
Dont trust in that site! Go to the "rom and kernel credit" and check the bootloader and modem you need to flash FIRST!!!!! and you see a DIFERENT bootloader and modem that 6.0.1 Tmobile firmware.
That site is a so fake site and VERY out of exacty info.
Example: They post a rom to X device when is for the same device but with other firmware OR the rom is for OTHER device.... always come to XDA if you dont want a issues or brick problems....
Related
Could some one for benefit of Indian Tab Owners, write a step-by-step instructions or guide. Lot of information to digest for a new user including details of 1) rooting 2) installing recovery 3) flashing ... this information would be great useful for everyone.
My Tab details :
(Model: GT-P1000 | Code: INU | Version: P1000DDJK3/P1000ODDJJ1/P1000DDJJ1)
hey..even i have a galaxy tab indian version...just follow the guides that are avaliable here for rooting flashing etc...etc...and i had the same modem when i bought it but its since been upgraded to a newer version of the modem so i just updated the modem to the ...DXJM2 version..thought the asian modem would be better for me..if u want i'll post the modem.bin
Dare{D}evil said:
hey..even i have a galaxy tab indian version...just follow the guides that are avaliable here for rooting flashing etc...etc...and i had the same modem when i bought it but its since been upgraded to a newer version of the modem so i just updated the modem to the ...DXJM2 version..thought the asian modem would be better for me..if u want i'll post the modem.bin
Click to expand...
Click to collapse
Thank you for quick reply. I started compiling the files need to flashing. So far, I could do following. Please advice me whether I am on the right path or not.
1. Rooted my tab with Z4root. Now I got root permission.
2. Downloaded Odin3 v1.7.exe and s1_odin_20100803.pit for flashing
3. Downloaded Roto-JMI-Full-v2.zip and Roto-JMI-Upgrade-v2.zip
Now, using Odin PDA button, I want to flash Roto-JMI-Full-v2.zip ?
Few questions:
a) Is this correct way of flashing or I am missing something?
b) Does above flash install Recovery also ?
c) which files need for PHONE and CSC files ?
d) Which firmware best suitable for Indian Tab ?
Thank you in advance for clarifying above.
I really appreciated reply for my questions as it would allow me to move forward. I will ensure a good documentation at the end of the process for benefit of other users.
nchary05 said:
Thank you for quick reply. I started compiling the files need to flashing. So far, I could do following. Please advice me whether I am on the right path or not.
1. Rooted my tab with Z4root. Now I got root permission.
2. Downloaded Odin3 v1.7.exe and s1_odin_20100803.pit for flashing
3. Downloaded Roto-JMI-Full-v2.zip and Roto-JMI-Upgrade-v2.zip
Now, using Odin PDA button, I want to flash Roto-JMI-Full-v2.zip ?
Few questions:
a) Is this correct way of flashing or I am missing something?
b) Does above flash install Recovery also ?
c) which files need for PHONE and CSC files ?
MId) Which firmware best suitable for Indian Tab ?
Thank you in advance for clarifying above.
Click to expand...
Click to collapse
Install Adfree or something which requires root acess for installation. Once rooted download something like root explorer from market which allows you to backup the modem.bin file. Or me or somebody else can just upload the file here.
Read the post/link in the thread where you downloaded Roto's JMI rom.
Use the .pit file from Roto's link not the thing which you posted...same place where you got the same ROM file. If you are flashing first time/from another rom then use the Full v2 zip file. Else use Update v2 when flashing from one of Roto's rom.
Connect the tab to your pc, reboot and go into download mode...press power+vol down button while rebooting...a yellow triangle icon with an android digging will come up...to get out of download mode,just keep the power button pressed till it rebooted normally.
Once in download mode, open up Odin and check that the yellow com box option is on. Check repartition option to ensure everything is wiped and you have a fresh install from scratch.
For PIT select the pit file downloaded from roto's link
For PDA select the Full.tar file
For PHONE select the modem.bin file
For CSC leave it blank...
Once done, recheck and hit start.
PLEASE CHECK ROTO'S JMI V2 THREAD IN THE DEVELOPEMENT SECTION...it has a link to howto which is old but gives some idea of how to proceed...for pit, pda, phone follow as I suggested and things will go fine...
Sent from my GT-P1000 using XDA App
Thank you.. I will do the same let you know the status....
blackheart2925 said:
Install Adfree or something which requires root acess for installation. Once rooted download something like root explorer from market which allows you to backup the modem.bin file. Or me or somebody else can just upload the file here.
Read the post/link in the thread where you downloaded Roto's JMI rom.
Use the .pit file from Roto's link not the thing which you posted...same place where you got the same ROM file. If you are flashing first time/from another rom then use the Full v2 zip file. Else use Update v2 when flashing from one of Roto's rom.
Connect the tab to your pc, reboot and go into download mode...press power+vol down button while rebooting...a yellow triangle icon with an android digging will come up...to get out of download mode,just keep the power button pressed till it rebooted normally.
Once in download mode, open up Odin and check that the yellow com box option is on. Check repartition option to ensure everything is wiped and you have a fresh install from scratch.
For PIT select the pit file downloaded from roto's link
For PDA select the Full.tar file
For PHONE select the modem.bin file
For CSC leave it blank...
Once done, recheck and hit start.
PLEASE CHECK ROTO'S JMI V2 THREAD IN THE DEVELOPEMENT SECTION...it has a link to howto which is old but gives some idea of how to proceed...for pit, pda, phone follow as I suggested and things will go fine...
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
I followed the steps after flashing 'full' tar, it rebooted tab, started the normally. After that, I verified that, all applications , phone (GSM) and wifi working fine.
Now my question is do I really need to flash *second* tar file ? what is it for ?
^^No. It is only for people upgrading from previous versions! You are good to go!
Now, I want to install CWM recovery. Please some one can confirm below steps:
1. Make sure to have Samsung Kies installed, and your tab at least connected once, to be sure the drivers are correct.
2. Your Tab must be Rooted.
3. If you wish to do a backup, now is the time.
4. You will need an SD Card with enough free space for the filesystem conversion, and to put the Overcome ROM on before we start. (An empty 4gb should be plenty, as long as it is empty, or close too)
5. Download and Extract the following file to your computer: http://www.apksmash.com/corodius/galaxytab.zip (Contains "Odin3 v.1.7.exe" "Overcome_Kernel_v1.0")
Now, we will Install the Kernel and perform the EXT4 filesystem conversion.
1. Turn off your Galaxy Tab.
2. Turn your Galaxy Tab on into DOWNLOAD mode (Press Volume DOWN and Power On at the same time).
3. Open Odin3 v1.7.exe on your PC.
4. Connect your Galaxy Tab to your PC via the USB cable.
5. Make Sure the ID:COM box is highlighted yellow (meaning it sees your tab).
6. Click on the PDA button and select the Overcome_Kernel_v1.0.tar file you downloaded earlier (make sure PDA is ticked after selecting the file).
7. The only boxes ticked should be:
A. Auto Reboot
B. F. Reset Time
C. The PDA tickbox
8. Click start and wait for PASS! to show highlighted green on Odin.
9. Your Galaxy Tab will Reboot, and get stuck on the Samsung Boot Screen. This is fine.
10. Turn your Galaxy Tab off by holding the power button for about 5 seconds.
11. Turn your Galaxy Tab on into RECOVERY mode (Press Volume UP and Power On at the same time).
12. The Galaxy Tab will now perform the EXT4 conversion.
13. Sit tight, depending on how much data you have, this can take quite a long time.
14. Once finished, click reboot system now (by pressing the power button).
At this point, You have installed the Overcome Kernel with CWM included and converted the Filesystem to EXT4. It has been reported that many stock ROMs will boot and run fine now, however some may not, but it just depends on your ROM etc.
http://forum.xda-developers.com/showthread.php?p=11713685.
Would be there any problem ? or is there any easy way to install CWM Recovery.
I had bricked my tab while modding battery icon and it was not booting now. Now i want to flash with the custom rom available here. I am noob to flashing so just want to confirm the steps mentioned above applicable to the bricked tab. Can somebody guide me for bircked tab.
Please mentioned the good custom rom with Ext4 conversion at the time of install. I am using indian tab.
@OP:- Sorry for hijacking this thread but find some info here for my queries
Can you get into download mode? If yes then you should be able to flash...but I would suggest checking"I bricked my tab" threads in general or developement section...
Sent from my GT-P1000 using XDA App
nchary05 said:
Now, I want to install CWM recovery. Please some one can confirm below steps:
1. Make sure to have Samsung Kies installed, and your tab at least connected once, to be sure the drivers are correct.
2. Your Tab must be Rooted.
3. If you wish to do a backup, now is the time.
4. You will need an SD Card with enough free space for the filesystem conversion, and to put the Overcome ROM on before we start. (An empty 4gb should be plenty, as long as it is empty, or close too)
5. Download and Extract the following file to your computer: http://www.apksmash.com/corodius/galaxytab.zip (Contains "Odin3 v.1.7.exe" "Overcome_Kernel_v1.0")
Now, we will Install the Kernel and perform the EXT4 filesystem conversion.
1. Turn off your Galaxy Tab.
2. Turn your Galaxy Tab on into DOWNLOAD mode (Press Volume DOWN and Power On at the same time).
3. Open Odin3 v1.7.exe on your PC.
4. Connect your Galaxy Tab to your PC via the USB cable.
5. Make Sure the ID:COM box is highlighted yellow (meaning it sees your tab).
6. Click on the PDA button and select the Overcome_Kernel_v1.0.tar file you downloaded earlier (make sure PDA is ticked after selecting the file).
7. The only boxes ticked should be:
A. Auto Reboot
B. F. Reset Time
C. The PDA tickbox
8. Click start and wait for PASS! to show highlighted green on Odin.
9. Your Galaxy Tab will Reboot, and get stuck on the Samsung Boot Screen. This is fine.
10. Turn your Galaxy Tab off by holding the power button for about 5 seconds.
11. Turn your Galaxy Tab on into RECOVERY mode (Press Volume UP and Power On at the same time).
12. The Galaxy Tab will now perform the EXT4 conversion.
13. Sit tight, depending on how much data you have, this can take quite a long time.
14. Once finished, click reboot system now (by pressing the power button).
At this point, You have installed the Overcome Kernel with CWM included and converted the Filesystem to EXT4. It has been reported that many stock ROMs will boot and run fine now, however some may not, but it just depends on your ROM etc.
http://forum.xda-developers.com/showthread.php?p=11713685.
Would be there any problem ? or is there any easy way to install CWM Recovery.
Click to expand...
Click to collapse
I followed above steps and could able to install CWM RECOVER.
congrats dude
maddy_in65 said:
I had bricked my tab while modding battery icon and it was not booting now. Now i want to flash with the custom rom available here. I am noob to flashing so just want to confirm the steps mentioned above applicable to the bricked tab. Can somebody guide me for bircked tab.
Please mentioned the good custom rom with Ext4 conversion at the time of install. I am using indian tab.
@OP:- Sorry for hijacking this thread but find some info here for my queries
Click to expand...
Click to collapse
can you just tel me which modem.bin are u using coz i was planning to flash but stuck on decision bcoz of modem... is it jpz or jk3? or any other
A new GB version is available DDJPA
http://forum.xda-developers.com/showthread.php?t=1226674
need PDA PIT PHONE CSC files
Kindly send me the links for downloading the PDA PIT PHONE CSC files as I could find only broken links.
My samsung tab (Version: P1000DDJK3/P1000ODDJJ1/P1000DDJJ1)) is bricked and won't boot.
Than You
nchary05 said:
Could some one for benefit of Indian Tab Owners, write a step-by-step instructions or guide. Lot of information to digest for a new user including details of 1) rooting 2) installing recovery 3) flashing ... this information would be great useful for everyone.
My Tab details :
(Model: GT-P1000 | Code: INU | Version: P1000DDJK3/P1000ODDJJ1/P1000DDJJ1)
Click to expand...
Click to collapse
so my galaxy note is rooted and was working fine until yesterday i plugged it in for charge and then when i took it off and tryed to turn it on it would not turn on it just comes up with the samsung galaxy note n7000 logo and when i press the 3 button combo it comes with WARNING!! a custom os can cause crictical blah blah and press volume up to contine and down to restart it's not coming with android recovery?
I would heavily appreciate any help as this is my daily driver!
Thanks
Download mode is Volume DOWN + Home + Power
Recovery mode is Volume UP + Home + Power
Make sure you are doing the right combination.
azzledazzle said:
Download mode is Volume DOWN + Home + Power
Recovery mode is Volume UP + Home + Power
Make sure you are doing the right combination.
Click to expand...
Click to collapse
Oh ****. Yeah i got it wrong lol Thanks for that mate!
right i've done it right this time and i wiped cache partition and davlik cache but it is still stuck on the galaxy note logo. help?
were you on ICS or GB ??
Id suggest to try and flash stock GB via ODIN, and if it still fails to boot, send it off for repair to Samsung
Flash any gb stock rom via odin...
Sent from my GT-N7000 using XDA Premium App
I'm on ICS and it's the official version i'd rather not send it to samsung as it is rooted but how do i flash a new rom with odin any main steps or tuts?
Thanks for replying!
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
azzledazzle said:
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
Click to expand...
Click to collapse
Thank your very much. I'm Downloading now, i'll post back how i get on!
azzledazzle said:
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
Click to expand...
Click to collapse
Sorry for being such a noob but i have downloaded both files and connected phone with laptop and odin where do i load the file that i have downloaded?
if it is one single file then it will go into the PDA section. If it comes in 3 files it will go in the respective section, i.e PDA, Phone, CSC.
do not select pit or repartition
azzledazzle said:
if it is one single file then it will go into the PDA section. If it comes in 3 files it will go in the respective section, i.e PDA, Phone, CSC.
do not select pit or repartition
Click to expand...
Click to collapse
It's a ZIP file and PDA requires a .tar file?
open it up There will be a .tar file inside it, Extract it and then load it into odin
I would highly recommend to flash Stock GB rom. Root it and flash any custom rom you want to..
You can find all GB stock Roms here :-
http://forum.xda-developers.com/showthread.php?t=1424997
How to install :-
Check here :- http://forum.xda-developers.com/showthread.php?t=1329360
Hope it helps.....
azzledazzle said:
open it up There will be a .tar file inside it, Extract it and then load it into odin
Click to expand...
Click to collapse
:silly: me!
done it now it's installing Thanks you very much people! appreciate your help!
Hi all,
firstly I would like to mention that I know that there are a lot of tutorials how to do this..but..I currently can't find the instructions to the latest "stock ROM" (I think its JW6 - if I am not correct feel free to correct me) root..
I would like to know these things:
1) How to root mentioned phone with this ROM?
2) I am not pretty sure but with my HTC WildFire S I didn't need to flash "kernel"? What it is and am I right that i need to flash it?
3) Will I have recovery (like CWM, ..) right after root or will I need to make some more to get recovery?
Sorry for posting this kind of answers - I think that they are already answered but I am little "confused" from information which I get from the internet.. I have already rooted and flashed custom ROM to my HTC WildFire S but with Samsung it looks for me quite "strange" and I really don't know what to do and I also don't want to end up with broken phone..
Thx all which will help me
First you need to download Odin and the Samsung USB driver.
Then download the root file from here. Search for JW4 since there is no root file for JW6. JW4 will work just fine.
Unpack the root file you downloaded.
Boot your device into Download mode by holding down the volume down + home + power buttons.
Open Odin and click AP. Then select the root file (.tar) you downloaded.
Connect your device to the computer and click Start (Make sure re-partition is not checked).
That's it.
Yes you will have CWM Recovery. To boot into CWM Recovery hold down the volume up + home + power buttons.
Hope this helps.
Guys, last compatible version of Odin for i9000 was 1.83, period.
Use JVU or JVZ as only those contain the bootloader you need for any 4.x custom ROM, no other Gingerbread firmware contains it.
@KoFiler on HTC you needed just a custom recovery. Here is the same, but as the recovery can not be flashed on i9000 separately, the package "zImage" contains also the kernel. So you must find a custom kernel that matches the firmware and flash it with Odin to get the custom recovery in package.
tetakpatalked from N7100
All files are downloaded from samsung-updates.
N910HXXU1BOC7:
NPL Nepal CSC:
Mod Edit links removed
You will not lose your warranty or do any harm to your device if you flash Stock Firmware. Please note that it's only for N910H. Knox stays 0x0.
Install Instructions:
Extract (unzip) the firmware file
Download zip-file ( Odin 3.10.6 )
Extract zip-file
Run Odin
boot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect your device to Pc/Laptop and wait until you get a blue sign in Odin
Add the firmware file to AP
Click the start button.
SAMSUNG USB Driver for Mobile Phones v1.5.49.0
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note: Flashing any Custom recovery or SuperSu Change your Knox to 0x1
Root Instructions:
Download TWRP v2.8.6.1 img.tar file.
Download SuperSu v2.46 and put it in youre device Storage
Run Odin
boot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect your device to Pc/Laptop and wait until you get a blue sign in Odin
Add the twrp file to AP
Click the start button
Reboot to recovery ( press and hold Home + Power + Volume Up buttons )
Flash SuperSu through Recovery.
Quick download mate .. thankssssssssss
Can anyone tell me if any of these CSC have option in camera settings to silent camera sound. (Without rooting some CSC enable that option in camera settings)
Nop
ariefabuzaky said:
Nop
Click to expand...
Click to collapse
Any idea if any of 910H CSC has it
tipu2185 said:
Any idea if any of 910H CSC has it
Click to expand...
Click to collapse
I have no idea if u not rooted but u cant install app from playstore
can someone uploaded to mega or g drive please
Fail to flash twrp
Hai guys
recently i wanted to root my note 4 using the tutorial on first post but it fail. ive been trying to flash my note 4 several times with different pcs to but it always fail
can someone help
thanks before
Hello, would it be possible to upload the modem alone ,from NPL CSC .. I have already downloaded CAC and upgraded to 5.0 but some how reception is not so good .. So wanted to try Nepal modem alone. Thanks in advance
Mod Edit
Links removed as none of them are acceptable file hosts on XDA
Please refer to this thread:
http://forum.xda-developers.com/note-4/general/lollipop-variants-roll-t3029201
and use the existing thread for the N910H variant
Thread closed
malybru
Forum Moderator
Who can benefit from this?
Anyone who softbricked with access to download mode
Anyone who wants to use the OTA function after root
Anyone who needs to send the phone in for repair
Anyone who wants to be on the most recent firmware and cannot use the OTA
Anyone who wants to downgrade *Unknown at this time downgrade at your own risk
Anyone who wants to return to stock from aosp or aokp
Linux and Mac users must follow the Odin method using the correct PIT file (will upload soon) and substitue Odin with Jodin3 found HERE and spam AdamOutler thanks button for making Jodin3 (AP in odin is PDA in jodin)
How to enter Download Mode
Make sure your device is completely off
Hold Volume Down + Home
While holding both of them simultaneously press the Power button until you see the disclaimer on the screen
Then let go of all the buttons and press Volume Up
=====================================================================================
Download and extract Odin (v3.10.6)
Download extract and install [Unified Driver Installer] (looking for the proper driver, please tell me if you have the latest unified)
Download firmware from the centralized location HERE
Enter Download Mode
If you have Kies installed make sure it is closed (check the task bar) then plug in your phone and wait for drivers to install
Open Odin As administrator
You should see your phone under ID:COM (you should also see it has been added in message)
Make sure only Auto Reboot and F. Reset Time is checked [ ]
Check AP [ ]
Click on [AP] And select the .tar file you just extracted (Only use AP Never use the others)
Wait for it to verify the MD5 then click [Start]
From here on out its all automated Odin will Flash the firmware then restart (dont forget first boot takes time)
If you get stuck in a boot loop go into recovery and do a factory reset (probably should regardless)
Sand Box
Who can benefit from this?
Anyone who softbricked with access to download mode
Anyone who wants to use the OTA function after root
Anyone who needs to send the phone in for repair
Anyone who wants to be on the most recent firmware
Anyone who wants to downgrade *Unknown at this time downgrade at your own risk
Anyone who wants to return to stock from aosp or aokp
ODIN files/flashing guide
Linux and Mac users must follow the Odin method using the correct PIT file (will upload soon) and substitue Odin with Jodin3 found HERE and spam AdamOutler thanks button for making Jodin3 (AP in odin is PDA in jodin)
How to enter Download Mode
Make sure your device is completely off
Hold Volume Down + Home
While holding both of them simultaneously press the Power button until you see the disclaimer on the screen
Then let go of all the buttons and press Volume Up
=====================================================================================
Download and extract Odin (v3.10.6)
Download extract and install [Unified Driver Installer] (looking for the proper driver, please tell me if you have the latest unified)
Download and extract G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5.7z
Older firmware HERE
Enter Download Mode
If you have Kies installed make sure it is closed (check the task bar) then plug in your phone and wait for drivers to install
Open Odin As administrator
You should see your phone under ID:COM (you should also see it has been added in message)
Make sure only Auto Reboot and F. Reset Time is checked [ ]
Check AP [ ]
Click on [AP] And select the .tar file you just extracted (Only use AP Never use the others)
Wait for it to verify the MD5 then click [Start]
From here on out its all automated Odin will Flash the firmware then restart (dont forget first boot takes time)
If you get stuck in a boot loop go into recovery and do a factory reset (probably should regardless)
TWRP Files/flashing guide
Download your preferred choice of SM-G920Txxx-Untouched_Stock_Restore.zip HERE (Perfect 1:1 image unlike most roms)
Also download and copy superSu & twrp to your phone if you want root and custom recovery SUPERSU DOWNLOAD AND TWRP-xxxxxxx.zip
Copy SM-G920Txxx-Untouched_Stock_Restore.zip to Phone
Reboot into twrp
For firmware update do not wipe! skip to step 8. If you want untouched stock continue with step 4.
Click [Wipe]
Click [Advanced Wipe] (For full wipe stock restore only)
Select dalvik cache, system, Data and cache
Click the home Icon in the bottom left
Click [Install]
Select SM-G920Txxx-Untouched_Stock_Restore.zip
If you want root and/or twrp add UPDATE-SuperSU-vxxxxx.zip to the queue by touching [Add More Zips]
Repeat for TWRP-xxxxxxx.zip
Swipe to install [====>]
Install will now begin, pure stock: system, kernel, recovery, modem and rpm will be installed
After completion click [wipe cache/dalvik] (do not skip especially if you dirty flashed)
Swipe to wipe [====>]
Click [back]
Click [reboot system] (it might say no os but it is wrong you do have a os click restart anyway) [dirty flash will not have that problem]
If you want internal sd to be formatted do a factory reset in what should now be the stock recovery (if you didn't install the twrp zip)
Reserved
Mirror: http://cheatersedge.org/android/G920TUVU1AOCG_G920TTMB1AOCG_TMB.zip
Fenny said:
Mirror: http://cheatersedge.org/android/G920TUVU1AOCG_G920TTMB1AOCG_TMB.zip
Click to expand...
Click to collapse
Can you please post a link for the SM-G925T
TMobile S6 Edge 128GB variant if you know of one.
Added: Odin v3.10.6 and G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5.7z
ThePagel said:
Introduction (will be deleted some time in the next couple days)
Hello everybody, I will be getting this phone next month and look forward to expanding this thread to cover more than just firmware and odin. I have made a few guides and have been told how easy it is to understand and follow compared to others. With that in mind I figured I would just nip this in the butt right now before someone beats me to the punch.
Other than odin I will also for sure be making a back to pure untouched stock for twrp which will flash the following stock images: system, kernel, modem, recovery and if we never see a locked bootloader rpm. This will have to wait until I have the phone because I refuse to make work public unless I have tested it on myself first.
Other than this first part of the op, it should stay more or less the same for the next month. post #2 will have a sandbox for the future of the op then it will turn into a spot to post answers to commonly asked questions.
***********************************************************************************************************
EDIT: REPLY
Would you have a link for the stock SM-G925T tar file for TMobiles S6 Edge 128GB By chance. A Donation on my part would be more than welcome to do for you. PS....I have no clue why I cannot open any link on sammobile web. So a mirror of any sort would be highly appreciated.
Click to expand...
Click to collapse
Docmjldds said:
Would you have a link for the stock SM-G925T tar file for TMobiles S6 Edge 128GB By chance. A Donation on my part would be more than welcome to do for you. PS....I have no clue why I cannot open any link on sammobile web. So a mirror of any sort would be highly appreciated.
Click to expand...
Click to collapse
Ill look into it when I get some free time. Back when I had a s3 I was getting the tar balls without the phone plugged in and without the sammobile site, need to rediscover how I did that.
Fenny said:
Mirror: http://cheatersedge.org/android/G920TUVU1AOCG_G920TTMB1AOCG_TMB.zip
Click to expand...
Click to collapse
Fenny! glad to see you still around, mate :highfive:
Download your preferred choice of SM-G920Txxx-Untouched_Stock_Restore.zip HERE (Perfect 1:1 image unlike most roms)
Where do I get this?
Fightoffyoredeamons said:
Download your preferred choice of SM-G920Txxx-Untouched_Stock_Restore.zip HERE (Perfect 1:1 image unlike most roms)
Where do I get this?
Click to expand...
Click to collapse
Yes, where is this zip file?
Sent from my SM-G920T using XDA Free mobile app
Fightoffyoredeamons said:
Download your preferred choice of SM-G920Txxx-Untouched_Stock_Restore.zip HERE (Perfect 1:1 image unlike most roms)
Where do I get this?
Click to expand...
Click to collapse
I have yet to throw one together because I like to test that stuff on myself first (not getting the phone until the first). But I have a member willing to test it so if you want in on that youre more than welcome. I should have it done tonight if time allows.
Which stock firmware is this? The original one is 3.5 GB.
Sent from my SM-G920T using XDA Free mobile app
ledvedder said:
Which stock firmware is this? The original one is 3.5 GB.
Sent from my SM-G920T using XDA Free mobile app
Click to expand...
Click to collapse
Its still the original, just compressed.
You recommend JOdin for Linux users. But isn't that just a front end for Heimdall, and Heimdall has not been working on Linux for a while?
Dr. Fed said:
You recommend JOdin for Linux users. But isn't that just a front end for Heimdall, and Heimdall has not been working on Linux for a while?
Click to expand...
Click to collapse
I thought it got updated, I'll look into it.
Thank you for this. I rooted my phone before I installed the OTA because the TMobile rep told me the latest OTA was bricking phones. Obviously, this was not true and I couldn't update the phone. All is well now.
Would going through the process untrip the KNOX flag from rooting and such?
nolimit78 said:
Would going through the process untrip the KNOX flag from rooting and such?
Click to expand...
Click to collapse
No! Once it's tripped, it's done. No resetting it.
I tried using JOdin last night but it couldn't ever get my PIT file and never restarted my phone. It would just say that it failed. Can I use someone else's PIT file for the same model or does it need to be specific to my phone? SM-G920T is my model, if so.
I tried odin on a friend's windows computer and it never recognized my phone when I plugged it in in download mode. so i'm not sure what is going on. :/