Hi there,
I have a Archos Diamond Plus (Android 5.1, MT6753), which I is rooted. Now I want to install the Xposed Framework. Unfortunately is there since Android 5.X no more Installer, only a zip to flash in CWM.
Is there is any recovery which allows flashing and is compatible to MT6753?
I have searched a lot – but I'm not sure, if there is one or if it will breaks the phone.
Can anyone help me?
Thanks a lot in advance!
Well, for the recovery part, I'm trying to port CWM or TWRP to Archos Diamond Plus. Only problem is that I can't seem to unlock my bootloader -_-
So if anyone knows something usefull, please share it with me
Related
I have searched a lot on the web and xda but cannot find any solutions. As far as I know I have correctly installed the Xposed framework using TWRP but when rebooting I get stuck on the Samsung logo screen and have to recover to fix. I have tried various versions of the framework and always get the same issue.
Android version - 5.0.2
Installed ROM (stock or custom ROM) - Stock ROM (Would install custom if it helps but cant decide which one yet)
Names of the file you tried to flash - I tried 3 - xposed-v67-sdk21-arm.zip, xposed-v72-sdk21-arm.zip, xposed-v86-sdk21-arm.zip
Error messages - none, but gets stuck at the samsung logo on boot
I really wanted to install the custom ROM Acheron, but dont think its compatible with my device so if anyone can recommend a good custom ROM I am all ears
DJRenegade88 said:
I have searched a lot on the web and xda but cannot find any solutions. As far as I know I have correctly installed the Xposed framework using TWRP but when rebooting I get stuck on the Samsung logo screen and have to recover to fix. I have tried various versions of the framework and always get the same issue.
Android version - 5.0.2
Installed ROM (stock or custom ROM) - Stock ROM (Would install custom if it helps but cant decide which one yet)
Names of the file you tried to flash - I tried 3 - xposed-v67-sdk21-arm.zip, xposed-v72-sdk21-arm.zip, xposed-v86-sdk21-arm.zip
Error messages - none, but gets stuck at the samsung logo on boot
I really wanted to install the custom ROM Acheron, but dont think its compatible with my device so if anyone can recommend a good custom ROM I am all ears
Click to expand...
Click to collapse
https://mega.nz/#!yMQ0ABIb!X_FrC0Uds2By-liblHEa9TTdy5v0wWIb76Jxr2JzKRo try this
Sent from my SM-A9100 using Tapatalk
Not sure I'd blindly follow a mega-upload...but maybe I'm paranoid. @DJRenegade88 I know you say you searched the web, but it sounds like you're trying to use the official xPosed. There's a huge red sign stating that if you try that on Samsung you will boot loop. For Android 5'0.x you need arter's xPosed
http://forum.xda-developers.com/showthread.php?t=3113463
If you update to 5.1 or 6 you'll need to get the Wanam version instead (I'd link, but don't wish to confuse you as you have 5.0.x (sdk21)
Nergal di Cuthah said:
Not sure I'd blindly follow a mega-upload...but maybe I'm paranoid. @DJRenegade88 I know you say you searched the web, but it sounds like you're trying to use the official xPosed. There's a huge red sign stating that if you try that on Samsung you will boot loop. For Android 5'0.x you need arter's xPosed
http://forum.xda-developers.com/showthread.php?t=3113463
If you update to 5.1 or 6 you'll need to get the Wanam version instead (I'd link, but don't wish to confuse you as you have 5.0.x (sdk21)
Click to expand...
Click to collapse
yea I was trying the official and I have seen that red text about samsung bootloops lol, dunno how I missed that the first time, thanks for the clarification. Is there a specific version I should download? I see he lists a few, I am guessing the most recent (xposed-v75-sdk21-arm-arter97-snapdragon.zip) is the correct one?
The number "75" "86" etc is the version number so everything you typed is correct 21 arter arm but you want whatever is the highest, with one caveat: if there is an 86 a few modules will not work (in short they will be forbidden from running by xPosed for bad coding); I'm guessing quite a few of the 5'0'x specific modules may get caught by this. If you find a module you can't live without that doesn't work (and gives a very specific, noticeable error in the xPosed log) you might want to stick with 85
Doesn't work
It took 5 minutes to boot and now it's optimizing all my apps. I don't think it works.
so i have confirmed my s5 is rooted, i downloaded the XposedInstaller_3.0-alpha4.apk and i get the message (The Xposed framework is not installed. please download the latest ZIP file from XDA and flash it manually via recovery..... ( now i tried a few files from the index due to confusion, im still confused so hopefully someone can clear it up for me but i chose sdk23 due to the fact its 6.0.1 marshmallow , then i chose arma since i figured the phone is 32 bit, but i dont know which version to choose???? also i dont have an sd card, can this be completed with adb sideload, or perhaps flashfire ? please help im racking my brain over this lol.
makatwin said:
so i have confirmed my s5 is rooted, i downloaded the XposedInstaller_3.0-alpha4.apk and i get the message (The Xposed framework is not installed. please download the latest ZIP file from XDA and flash it manually via recovery..... ( now i tried a few files from the index due to confusion, im still confused so hopefully someone can clear it up for me but i chose sdk23 due to the fact its 6.0.1 marshmallow , then i chose arma since i figured the phone is 32 bit, but i dont know which version to choose???? also i dont have an sd card, can this be completed with adb sideload, or perhaps flashfire ? please help im racking my brain over this lol.
Click to expand...
Click to collapse
Check out:
http://forum.xda-developers.com/showthread.php?t=3113463
Since you are using stock Samsung ROM. Official xposed doesn't work properly with stock Samsung.
You don't need an external SD card to flash, just custom recovery, though something like flashfire might work. It worked to flash xposed on my LG tablet
mattzeller said:
Check out:
http://forum.xda-developers.com/showthread.php?t=3113463
Since you are using stock Samsung ROM. Official xposed doesn't work properly with stock Samsung.
You don't need an external SD card to flash, just custom recovery, though something like flashfire might work. It worked to flash xposed on my LG tablet
Click to expand...
Click to collapse
i have a custom recovery and its working good, i just need to go buy an sd card which im about to go do, and im also confused on what you mean by samsung ROM, you mean i have a jailbroken phone but i need to actually download a custom rom like ( CyanogenMod 13.0 ) to alow the xposed firmware to run properly ? and also confused because what you linked me to is for lollipop i thought my phone was running off marshmellow hence (6.0.1), perhaps you could clarify im very new to this, thanks for the response though!
(ALSO FORGOT TO ASK) will downloading cyanogenmod 13.0 on a phone that is already rooted ruin the phone? or is it not a jailbreak its just modifications, etc?
makatwin said:
i have a custom recovery and its working good, i just need to go buy an sd card which im about to go do, and im also confused on what you mean by samsung ROM, you mean i have a jailbroken phone but i need to actually download a custom rom like ( CyanogenMod 13.0 ) to alow the xposed firmware to run properly ? and also confused because what you linked me to is for lollipop i thought my phone was running off marshmellow hence (6.0.1), perhaps you could clarify im very new to this, thanks for the response though!
(ALSO FORGOT TO ASK) will downloading cyanogenmod 13.0 on a phone that is already rooted ruin the phone? or is it not a jailbreak its just modifications, etc?
Click to expand...
Click to collapse
i need to actually download a custom rom like ( CyanogenMod 13.0 ) to alow the xposed firmware to run properly ?
Click to expand...
Click to collapse
No, you just need the correct version of Xposed
what you linked me to is for lollipop i thought my phone was running off marshmellow hence (6.0.1)
Click to expand...
Click to collapse
What I linked you was the thread for a special build of Xposed for stock Samsung devices, it has Xposed for Marshmallow as well as Lollipop, you need to read through the thread.
(ALSO FORGOT TO ASK) will downloading cyanogenmod 13.0 on a phone that is already rooted ruin the phone? or is it not a jailbreak its just modifications, etc?
Click to expand...
Click to collapse
Modifying phones like putting custom ROMs and recoveries will void your warranty, but usually won't ruin them in most cases, but there is always the potential.
I'm going to put this out there, and please don't get offended. I would advise you not pursue this further until you do some more reading and learning, as you yet have grasped fully what you are doing. Since you don't have someone who knows what they are doing right there with you. And troubleshooting via a forum can be difficult to do since it isn't real time.
1. Android phones are not jailbroken, they are rooted.
2. ROM refers to the version/setup of Android for a device.
3. I said you didn't need an external SD card. Though, it does make it easier if you have one to do things like backup your ROM before you do any modifications like this, so if it goes south you can restore it to it's current state.
You can PM me more about this if you like instead of cluttering the thread.
I had to manually go to my applications and check storage permissions for xposed installer, although i deleted smart manager with titanium backup so could be why it wasnf automatically asked at installation.
SOLVED
https://www.androidfilehost.com/?w=files&flid=78069 install
xposed-v86.0-sdk23-arm-custom-build-by-wanam-20160709.zip
Hi everyone,
I literally just got the Chinese version of the oneplus 3T (A3010) and I want to move from Hydrogen OS 2.5.1 to Oxygen OS 3.5 official with OTA. Does anyone have the file or instructions how to do this? I found instructions for the oneplus 3 but not sure with this model. I'm sure any help would help out a lot of people who are gonna ask this question.
Also will this unlock the bootloader? Just curious about it affecting android pay.
Thank you!:laugh:
logansrun24 said:
Hi everyone,
I literally just got the Chinese version of the oneplus 3T (A3010) and I want to move from Hydrogen OS 2.5.1 to Oxygen OS 3.5 official with OTA. Does anyone have the file or instructions how to do this? I found instructions for the oneplus 3 but not sure with this model. I'm sure any help would help out a lot of people who are gonna ask this question.
Also will this unlock the bootloader? Just curious about it affecting android pay.
Thank you!:laugh:
Click to expand...
Click to collapse
Wanna do me a favor and grab a nandroid backup of your rom before you kill it? I actually want h2os
Aside from that, you should theoretically be able to: ("Official" guide https://forums.oneplus.net/threads/...oid-efs-backup-and-more.475142/#post-15431571)
Unlock the bootloader
Flash TWRP
Flash dm-verity
Flash OOS 3.5.3 from the ROM page, I have a mirror too (http://forum.xda-developers.com/oneplus-3t/how-to/zip-flashable-firmware-modem-t3509015) mirror on pg 2.
and you'll be set, you can flash the original recovery if it's available on the OnePlus page as well and relock to go back to full stock just English version
PS: Since there is no stock recovery image available yet, maybe will have to run TWRP temporarily, rip the recovery off and then proceed? I dunno
Thanks for your quick reply! I was hoping more along the lines of the adb Sideload method and keep the bootloader locked for now though. If I go the root method sure I can share the nandroid backup.
PS the rom looks really similar to the oxygen rom, so far it looks like only the launcher is different. I guess this is part of the plan to merge the two.
Well you can try flashing the image straight. It's a stock image anyways so it could work.
logansrun24 said:
Thanks for your quick reply! I was hoping more along the lines of the adb Sideload method and keep the bootloader locked for now though. If I go the root method sure I can share the nandroid backup.
PS the rom looks really similar to the oxygen rom, so far it looks like only the launcher is different. I guess this is part of the plan to merge the two.
Click to expand...
Click to collapse
Basically what I meant was to do the opposite of what is suggested here http://forum.xda-developers.com/oneplus-3t/how-to/rom-h2os-2-5-oneplus-3t-released-t3511443 but with the 3.5.3 ROM
Help needed with android pay and OOS clean install
I'm in a similar situation with a chinese bought OnePlus 3G from Lazada.sg that came with Hydrogen OS. I've managed to install TWRP but because I'm completely new, got stuck and instead managed to install OOS 3.5 (now 4.## from the official website) using adb sideload.
I do have 2 questions:
1) My internet connection drops occasionally even though my WiFi is still connected, is that an issue because I might not have installed it correctly? Would a clean flash solve it?
2) I understand android pay is disabled when you unlock bootloader but even after that, will it be possible to wipe the phone clean and do a fresh install of the lastest OOS and the phone will pretty much be like the international version, with android pay re-enabled?
I believe you can use Sultanxda's patch as another way around, but it sounds complicated as hell for a new person, so I'll continue digging around while waiting for a reply.
Thank you, and any advice will be greatly appreciated.
So long story short I wanted to get root access in order to install an audio mod for my phone, realized it was basically pain in the ass and most of the time it won't work so I want to revert the changes back to where I started (a.k.a. stock recovery, locked bootloader). Also system update doesn't work with TWRP, it just boots into TWRP and doesn't proceed installing the update. I'd like to fix that.
My phone is VTR-L29C432 B360 Oreo 8.0
I flashed this TWRP -> https://forum.xda-developers.com/p10/development/recovery-twrp-3-2-1-0-emui-8-0-4-04-2018-t3773449
Phone hasn't been rooted.
I'm sorry if it looks like I made something dumb but I just want some help. I'd appreciate anything really.
Anyone anything? At least I'd like to revert to stock recovery so I can install B365.
On the other side would installing B365 from FF work fine with TWRP?
Really nobody has a solution? Can't I extract the stock recovery for B360 from somewhere? It's that I'm new with Huawei phone and I'm not sure how everything works here. I used to own Galaxy Y but things were simpler there.
BloodBullet said:
Really nobody has a solution? Can't I extract the stock recovery for B360 from somewhere? It's that I'm new with Huawei phone and I'm not sure how everything works here. I used to own Galaxy Y but things were simpler there.
Click to expand...
Click to collapse
With this guide I update B60 A B 365 I hope it helps you
https://forum.xda-developers.com/p10/how-to/guide-manual-updgrade-to-update-oreo-t3758286
Hi guys. I got this device today and am very happy with it.
I'm used to rooting my devices, so I want to root this one too and was hoping you could help me a bit.
I have the Oreo update installed and I see there are some TWRP that work with oreo. What is the best one to use with stock rom? I only want to root so I can install adaway and lucky patcher. Also, if an update comes later this year, like android P or something, can I switch back to the stock recovery, install it and then switch to TWRP again?
So, basically, where can I download stock recovery for Oreo, what TWRP should I use?
Thank you very much
olat_dragneel said:
Hi guys. I got this device today and am very happy with it.
I'm used to rooting my devices, so I want to root this one too and was hoping you could help me a bit.
I have the Oreo update installed and I see there are some TWRP that work with oreo. What is the best one to use with stock rom? I only want to root so I can install adaway and lucky patcher. Also, if an update comes later this year, like android P or something, can I switch back to the stock recovery, install it and then switch to TWRP again?
So, basically, where can I download stock recovery for Oreo, what TWRP should I use?
Thank you very much [/QUOTE
Excellent Question. Highly unlikely to get a reply as you have not included geek terms.
Click to expand...
Click to collapse
I'll add #geek to the post
I am pretty sure you need TWRP. Here is a good guide: https://forum.xda-developers.com/p10-plus/development/magisk-p10-p10plus-t3752482
I do not know how to update with root. I am afraid it involves reinstalling the original recovery and a factory reset.
Unlocking the bootloader is currently a bit of a hassle since the unlock webpage is down. You'll have to contact Huawei Customer Service to get the code.