Database Develop

[Q] Anycall Galaxy stuck..>.> please HELP!

Closed.closed.

What does your boot screen look like?
What did you do with Odin? What did you select, what firmware, etc?

Please HELP me!!!!
I have just bought an SHW-M110S and I tried "3-button combo fix for any firmware version" lastnight. Unfortunately, My phone got bricked after trying this way. Please help me to flash my phone back to my latest M110S firmware:
Baseband version:
M110S.DH09.2134.ST
Build number
ECLAIR.DI03
Thank you so much.

koe1974 said:
What does your boot screen look like?
What did you do with Odin? What did you select, what firmware, etc?
Click to expand...
Click to collapse
i followed one of the steps in this forum, the 3 v1 odin..first is to tick retick repartition then pit xxx512 something like that then it recognize my device..then the "PASS" then i disconnect after that my boot screen changed.or download mode screen?...my boot screen before Samsung Anycall Galaxy S, download mode screen is Written in korean but with English UPgrade..is that it?...then now..its Samsung Anycall..with 3 color box at the right with talk, love, play written on the box..HELP.

kirkmaglaya said:
i followed one of the steps in this forum, the 3 v1 odin..first is to tick retick repartition then pit xxx512 something like that then it recognize my device..then the "PASS" then i disconnect after that my boot screen changed.or download mode screen?...my boot screen before Samsung Anycall Galaxy S, download mode screen is Written in korean but with English UPgrade..is that it?...then now..its Samsung Anycall..with 3 color box at the right with talk, love, play written on the box..HELP.
Click to expand...
Click to collapse
Keep reading the thread. There is chinese firmware that will get your phone back to working condition so it can be flashed again with kies. Your bootloader has been overwritten and the only way to fix that, as far as I know, is to bring it to Samsung for after service.

koe1974 said:
Keep reading the thread. There is chinese firmware that will get your phone back to working condition so it can be flashed again with kies. Your bootloader has been overwritten and the only way to fix that, as far as I know, is to bring it to Samsung for after service.
Click to expand...
Click to collapse
is there any way that i can change this to US or international rom?...because korean rom has no swype and 80chars txt..

Nope i dont think you can unless someone patches the operator restrictions

hi there im new here and i know a little about flashing but i had managed to upgrade via samsung kies my anycall galaxy s M-110S. i thought its easy to upgrade via kies than odin. but now im having problem with 1. i opened kies and connect my friends galaxy s M-110S (korean) and kies said update available. i clicked to upgrade but its stuck. kies asked me to unplug the usb and remove battery and then connect again. i did so. but my kies keep searching the device though in device manager shows samsung modem connected. the phone shows "upgrade" in english and some words in korean is likely may be -upgrade did not finished. do it again (i know korean a little). so i need help from the masters. i badly need it to be ok. plz help me out
---------- Post added at 01:08 AM ---------- Previous post was at 12:37 AM ----------
koe1974 said:
Keep reading the thread. There is chinese firmware that will get your phone back to working condition so it can be flashed again with kies. Your bootloader has been overwritten and the only way to fix that, as far as I know, is to bring it to Samsung for after service.
Click to expand...
Click to collapse
i just want to get my phone back. plz give me the link of that chinese firmware or any additional information? plz need help. btw im new so guide me to the solution of that anycall galaxy s M-110s (korean). it failed when i tried to upgrade via kies. now its only in shows "upgrade" in boot screen.
thanks

Thread CLOSED!

please help..
My phone always restart when i tried to rooted odin to wc13 rooting kernel.tar ( PLEASE HELP MEEEE T_T

i stucking my phone in Downloading T_T plss help us
i cant upgrade my samsung galaxy s anycall but i use odin is not working after not working is stuck T_T plss help meeeeeeeeeeeeeee

i have samsung galaxy s anycall phone. it's battery low quickly because always light on off. what can i do

[Q] HELP HELP !!!! Looking Odin upgradable firmware

Hello all,
Bought a galaxy tab. And flashed it. With bad firmware.
I can set TAB in download mode.
So with ODIN I should be able to flash.
Can someone PLEASE!!!!?????? link me or tell me where to find A FULL EURO rom or P1000 compatible rom. That can be flashed with ODIN

Try latest Roto ROM here http://forum.xda-developers.com/showthread.php?t=939360, its okay for Euro Tab...

make a accout here, and you can choise the official firmware.

Samfirmware
Did that flashed and TAB boots and hangs at the SAMSUNG logo.
edit : DId a full whipe did not resolve hanging at the SAMSUNG logo
Used Jk5 with that. Downing Jk2 now.

ovigt71 said:
make a accout here, and you can choise the official firmware.
Click to expand...
Click to collapse
Why would u recommend this? Don't u know that they have locked bootloaders? People who don't understand stuff shouldn't be trying to help. Now he's gonna need to use the bootloader fix which has risks.
From the Tab.
www.twitter.com/ayman07

ayman07 said:
Why would u recommend this? Don't u know that they have locked bootloaders? People who don't understand stuff shouldn't be trying to help. Now he's gonna need to use the bootloader fix which has risks.
Click to expand...
Click to collapse
Only if he flashes one of the JMx series.
Flash the Rotohammer JMI firmware, it's a _complete_ firmware with the locked bootloader removed. If it doesn't work then you've either done something wrong (start again, read instructions carefully), or you've got a locked bootloader.
If you've already tried flashing a JMx firmware and are now having issues then you'll need to go back to whatever original firmware you had and then run the bootloader fix, which as long as you pay attention to the instructions is unlikely to be an issue, get it wrong however and you've got problems.
Also - this is not a development related question, should be in the general subforum.

TAB Dead
Tab is 3 days old and dead.
No recovery mode,
No Download mode,
only a blinking logo (screen of and on) that looks similar to the downloading logo when in flash mode when wall charger is attached.
No live indication or responsive s.
Indicates this a RMA to samsung service center.
Never had A flash or root problem of this kind before.
just the on of screen. If in wrong Category I hope some Admin might want to move it to the correct position.

ayman07 said:
Why would u recommend this? Don't u know that they have locked bootloaders? People who don't understand stuff shouldn't be trying to help. Now he's gonna need to use the bootloader fix which has risks.
From the Tab.
www.twitter.com/ayman07
Click to expand...
Click to collapse
Ok so you can give me a direct link to flashing boot of tab please ?

If it won't even get into download mode then there's nothing you can do to fix it, you'll have to take it back to the shop. Any fixes require being able to boot into download or recovery mode.

chetermaat said:
Tab is 3 days old and dead.
No recovery mode,
No Download mode,
only a blinking logo (screen of and on) that looks similar to the downloading logo when in flash mode when wall charger is attached.
No live indication or responsive s.
Indicates this a RMA to samsung service center.
Never had A flash or root problem of this kind before.
just the on of screen. If in wrong Category I hope some Admin might want to move it to the correct position.
Click to expand...
Click to collapse
Perhaps you mean the logo is phone at the left, middle is ! pc at the right, it's also a download mode, which you can flash thru odin, just flash with roto's rom, and do a repartition.

Basically if odin still able to detect your tab, it's not totally dead yet, if your tab's display is like what I mentioned above, just get roto's rom, AND MAKE SURE CHECKSUM IS CORRECT! Before flashing.

chetermaat said:
Ok so you can give me a direct link to flashing boot of tab please ?
Click to expand...
Click to collapse
Dutch!
http://gathering.tweakers.net/forum/list_message/35564050#35564050

[Q] Bricked NTT DoCoMo Japanese Tab

Ok here goes... This is my first thread post here but I am in serious need of help.
I have searched and searched the forums for a hopeful answer but I have found it difficult to find the answer I seek.
So here is the story:
Bought a GT second hand from Akihabara in Japan which was locked to NTT DoCoMo. I was using it as a WIFI only Tab and all was wonderful till my IT brain decided it could be better and I began to tinker.
I had been looking around for a way to make my Australian Virgin Mobile SIM to work on the tab and found a lot of good answers but nothing that would make it work.
I then had the brilliant idea to change the firmware with a European firmware so I could get all the features enabled from a fresh start. Which is where it all went wrong.
I first tried to flash the tab using Odin 1.7 with the P1000XXJK5 euro firmware from samfirmware.com
This failed and left my tab with the picture of a phone and a pc with a dotted line and in between them an exclamation point in a triangle.
After a lot of fiddling (I dont remember what I did but I managed to get rid of that screen had something to do with retrying the flash and it was very late last night at this point) I managed to try again but Odin just kept failing on running the updated firmware.
I then decided that it would be a good idea to run the Rotohammer firmware by following the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=895827&highlight=sc-01c
This is where I once again received errors from Odin and now my tab is somewhat bricked.
I tried reflashing but same errors every time. (I currently dont have the errors from Odin but I will update my post when I get home)
I can still get to the downloading screen (Yellow triangle with the Android digging) so I am hopeful all is not lost.
So now you have heard my sob story I will ask two questions....
1. Has anyone actually successfully flashed a Japanese model Tab?
2. My only thought/hope at the moment can anyone direct me to an original NTT DoCoMo firmware so I can at least go back to having WIFI only Tab?
Thanks in advance if you can help
Alex

Yes , i suggest you to wait until you get a right firmware for it !
That would probably work if the partitions are a match !
What is this model called btw ?
"NTT DoCoMo Japanese Tab" or there is any model ? such as M180 for korean , P1000 , P100 Sprint , I800 Verizon , etc..
Br
Oz

I am searching the an original NTT DoCoMo firmware.

Electroboy said:
Yes , i suggest you to wait until you get a right firmware for it !
That would probably work if the partitions are a match !
What is this model called btw ?
"NTT DoCoMo Japanese Tab" or there is any model ? such as M180 for korean , P1000 , P100 Sprint , I800 Verizon , etc..
Br
Oz
Click to expand...
Click to collapse
Oz the model is SC-01C it has a build date of 2010/12
I was thinking considering I can get into the build/download screen maybe trying an emergency firmware recovery using Kies.

Hi,
I'm a fellow SC01 owner. You can get a backup of the stock firmware here: http://www.megaupload.com/?d=OJAK2UZF
Firmware code is SC01COMJK2
I believe there are newer firmwares (which I haven't installed as some of them contain a new bootloader that only allows for signed firmwares, same as the international units) that I have seen mentioned on various Japanese blogs. Let me know if you want me to try to hunt any down for you.
As for my SC01, I installed the custom kernel by koxudaxi and it's working great. Mind you, I've only changed to this kernel and apart from that am running the stock OS. I got his kernel here which can overclock to 1.4GHz: http://koxudaxi.sakura.ne.jp/
The kernel I installed via Heindall is zImage_ntt_2. It looks like he's built a newer version though, I might check that out. I think what you might want to do, is in download mode try to restore the above backup to your unit. Look up the Roto Backup thread to see how to do this. Hopefully since you can get download mode, all is not lost. I personally think it's quite crummy that there are different hardware versions like this which aren't interchangeable though >_<

I'm going to give the original firmware a go today at lunch time and I will let you know how I go. Thanks anyways for the link if all goes well I'll look at possibly trying the the koxudaxi kernel.
UPDATE: Well I'm not having luck getting the firmware to flash to my tab I keep getting "Failed to retrieve config Descriptor" when trying to flash. I will keep plugging away.
UPDATE: Still getting the same problems using heimdall to flash the tab. Any suggestions as to what I could do next?

Recovering a Docomo Tab
I'm currently running Overcome v1.1.3 ROM and richardtrip's V15 kernel on my SC-01C.
acont said:
UPDATE: Well I'm not having luck getting the firmware to flash to my tab I keep getting "Failed to retrieve config Descriptor" when trying to flash. I will keep plugging away.
Click to expand...
Click to collapse
You're getting this error from Heimdall, right? Have you tried Odin 1.7?
Here's how I recovered my Tab using Odin:
1. Following the instructions in http://forum.xda-developers.com/showthread.php?t=895827, specify the P1_add_hidden.pit in the PIT button and select Re-Partition.
2. Specify the stock Docomo ROM when pressing the PDA button.
3. Ignore the Phone and CSC buttons, as the stock ROM already contain these items.
You should be able to restore your Tab to stock settings using this procedure.
If this doesn't work, you might want to check if the USB connection to your PC is ok, and if everything necessary to run Odin is installed on your PC.

Bugger!
Well thanks for your help all of you but I think I have just made matters worse.
Last night I had success in flashing the original docomo firmware provided to me by zetsurin but I think I shouldn't have included the boot images.
Unfortunately I think it is completely bricked now it now wont turn on and when plugged into power (thinking that the battery had died) it just comes up with a white screen.
I can't boot into download mode and I can hold down the power button till I turn blue in the face... So as Bones would say "It's dead Jim"
Unless any of you have anything else I could try as a last ditch shot I might just have to ship it back to Japan and get them to fix it or maybe try Samsung here in Oz.
Serves me right
Thanks again.

acont said:
Last night I had success in flashing the original docomo firmware provided to me by zetsurin but I think I shouldn't have included the boot images.
Click to expand...
Click to collapse
What exactly happened?
The SC01COMJK2 firmware does not contain protected bootloaders, by the way.
acont said:
Unfortunately I think it is completely bricked now it now wont turn on and when plugged into power (thinking that the battery had died) it just comes up with a white screen.
Click to expand...
Click to collapse
I've heard about this happening when the battery runs out. Try connecting the Tab to your PC (not your AC adapter) and let it trickle-charge for an hour or so. If successful, you should see the download screen.

fury1sog unfortunately that didnt work
spoke to the samsung repairers here in Aus and they said they can take a look at it for me hopefully bring life back into my unit and then I will never touch it again

Any thoughts?
Hopefully this post is still being looked at but has anyone got any ideas as to what I could do before I fork out $374 to my tab repaired by Samsung Australia?
According to the repair guys its a faulty board (not an idiot that tried to flash it) and needs to be replaced. Not sure if this is worth my trouble considering I could buy a brand new tab for $599.
There is a positive out of this, the MB will be an Australian MB and I will have a working "Australian" tab instead of the Japanese version.
Considering the unfortunate tragedy in Japan I am not sure I should try and get my friend in Japan to fix it for me.
Thoughts anyone?

I know someone who can unlock it, I have mine unlocked by them.
I was afraid of flashing it myself so I paid to have it unlocked, cost was $20.
I think you better go for the MB replacement, it's cheaper.

For what it's worth, I went to reset my tab to factory using a rotohammer backup I made when I first bought it, and got stuck in a boot loop. So I then used ODIN. Still got a boot loop. Then I tried ODIN repartition... it hung for hours. Knowing the thing was likely bricked I pulled the plug and now I am in the situation as you: I have a crappy icon of a phone + an exclamation + computer image. Dead.
I think the best thing I can do for this junk is to toss it unceremoniously in the bin. Fortunately I also have an iPad which has resumed full-time service.
EDIT: Some signs of hope in here: http://forum.xda-developers.com/showthread.php?t=903257
Try "heimdall close-pc-screen" to see if your tab can get kicked back into the boot loop at least. Mine has failed a repartition, but I can still get it into the boot loop, which is a start. Will experiment over the weekend.
EDIT 2: Well my tab is back up and runing. I reflashed my original roto backup using ODIN with repartition on, then I went into recovery and did a factory restore. Back up like stock now. I think I'm going to sell it though, since it's been badly dis-owned by Samsung.

zetsurin said:
Hi,
I'm a fellow SC01 owner. You can get a backup of the stock firmware here: http://www.megaupload.com/?d=OJAK2UZF
Firmware code is SC01COMJK2
I believe there are newer firmwares (which I haven't installed as some of them contain a new bootloader that only allows for signed firmwares, same as the international units) that I have seen mentioned on various Japanese blogs. Let me know if you want me to try to hunt any down for you.
As for my SC01, I installed the custom kernel by koxudaxi and it's working great. Mind you, I've only changed to this kernel and apart from that am running the stock OS. I got his kernel here which can overclock to 1.4GHz: http://koxudaxi.sakura.ne.jp/
The kernel I installed via Heindall is zImage_ntt_2. It looks like he's built a newer version though, I might check that out. I think what you might want to do, is in download mode try to restore the above backup to your unit. Look up the Roto Backup thread to see how to do this. Hopefully since you can get download mode, all is not lost. I personally think it's quite crummy that there are different hardware versions like this which aren't interchangeable though >_<
Click to expand...
Click to collapse
hi zetsurin!
thanks for teaching me how to unlock the tab.
problem now is, im not able to successfully flash any rom. keeps saying write fail, using odin.
stuck at docomo logo when rebooted.
need help.

also used heimdall. starts downloading. but stuck almost at the end of the tab's progress bar.
argh...

me too ! samsung galaxy tab m180 Korean .... huhu

What ROM is best for a SC-01C?
Hi Guys
I picked up a 2nd hand SC-01C from Yahoo Auction, and am wondering what the best ROM to use with it is...
Looks like this guy has got an Overcome ROM on it OK, (http://chaki-ramone.blogspot.com/2011/06/galaxytabsc-01cgingerbreadromovercome.html), so I wonder if the latest version (http://forum.xda-developers.com/showthread.php?t=1205990) will work OK - anyone tried? (is the SC-01C a GSM-based model??)
I'm not going to use a SIM with it, so I'm not bothered about unlocking - but just want it rooted & want a good balance between speed & battery life. If you were going from scratch with an SC-01C, what would you do? Any suggestions greatfully received!
Thanks in advance?
PS - I'm an iPhone / iPad / Ideos 8150 / Notion Ink Adam owner, all jailbroken / rooted. So I'm not scared about rooting per-se, just worried about trying something that will not work because of anything docomo has done to the Tab!

Acont you could be coma bricked try pluginging it into THE MAINS for at least 4 hours if nothing come up your hard bricked.
Sent from my GT-P1000 using XDA Premium App

zetsurin said:
For what it's worth, I went to reset my tab to factory using a rotohammer backup I made when I first bought it, and got stuck in a boot loop. So I then used ODIN. Still got a boot loop. Then I tried ODIN repartition... it hung for hours. Knowing the thing was likely bricked I pulled the plug and now I am in the situation as you: I have a crappy icon of a phone + an exclamation + computer image. Dead.
I think the best thing I can do for this junk is to toss it unceremoniously in the bin. Fortunately I also have an iPad which has resumed full-time service.
EDIT: Some signs of hope in here: http://forum.xda-developers.com/showthread.php?t=903257
Try "heimdall close-pc-screen" to see if your tab can get kicked back into the boot loop at least. Mine has failed a repartition, but I can still get it into the boot loop, which is a start. Will experiment over the weekend.
EDIT 2: Well my tab is back up and runing. I reflashed my original roto backup using ODIN with repartition on, then I went into recovery and did a factory restore. Back up like stock now. I think I'm going to sell it though, since it's been badly dis-owned by Samsung.
Click to expand...
Click to collapse
Can anyone pls help,, my galaxy tab 7inch gt-p1000r is stuck on phone+pc logo, can't go to download mode, can't go to recovery mode,, can't do anything,, pls someone help me,, I am desperate..

huylang280285 said:
me too ! samsung galaxy tab m180 Korean .... huhu
Click to expand...
Click to collapse
unbricking M180 is done long time ago
Here is a video for you
http://www.ort-jtag.com/blog/?e=15
udhtari said:
Can anyone pls help,, my galaxy tab 7inch gt-p1000r is stuck on phone+pc logo, can't go to download mode, can't go to recovery mode,, can't do anything,, pls someone help me,, I am desperate..
Click to expand...
Click to collapse
What about this P1000R , what is special or different ?
I know P1000L was for south american edition !
lemmy_0 said:
hi zetsurin!
thanks for teaching me how to unlock the tab.
problem now is, im not able to successfully flash any rom. keeps saying write fail, using odin.
stuck at docomo logo when rebooted.
need help.
Click to expand...
Click to collapse
Docomo solution is very soon !
That TAB need JTAGging thats the only way ..
I have the good and dead device in hand , we will release for ORT-JTAG probably this week ..
Best Regards
Oz.

Samsung note 5 stuck in a boot loop

Hello,
I am a noob... My note 5 went into boot loop several days after installing Avira (after the last update my phone said I had a virus... I should have known better)... I have spent many days researching and trying different things... most advice came from XDA so I joined. I have learned a lot but still have no success.
Samsung says I need a new phone... the local store took out the battery with no luck... They said its a gonner. Really??
I can get the phone into download and have it talk to my PC, but that is it... I cannot get into recovery or reset the phone
I was able to downgrade to OK3 using odin and passed, but still boot loop
I have purchased software to recover data, but FRP has blocked it
I have tried many different ways to remove FRP, but all have failed... I don't think I ever put this phone in debugging mode so I think that is why the other things have failed.
Is there anything I can do? Can you point me in the right direction (as long as it is not the trash can)
Please help.

Since you can get into download mode , have you tried to flash a full firmware package (make sure of model number first) via Odin ? sammobile has most firmwares. I would start with that. Good luck

Thank you so much for responding... I flashed ok3 from one of the links posted on this site using Odin and it passed successfully, but did not fix the problem. What would be the full firmware pack and were could I find so I know I have the right one

danarmor said:
Thank you so much for responding... I flashed ok3 from one of the links posted on this site using Odin and it passed successfully, but did not fix the problem. What would be the full firmware pack and were could I find so I know I have the right one
Click to expand...
Click to collapse
Just use smart switch. You don't have to worry about which firmware to be flashed. It will decide for you.
Sent from my SM-G925F

Rosli59564 said:
Just use smart switch. You don't have to worry about which firmware to be flashed. It will decide for you.
Sent from my SM-G925F
Click to expand...
Click to collapse
I tried that before with no success, but since Smart Switch had an update I tried it again... It says it does not support my SM-N920P.
I tried emergency rescue and it recognized my model number, but says I entered the wrong SN... I pretty sure I am entering the right SN

Bricked Samsung s6 from straighttalk

Okay so i had rooted my phone using Iroot and I wanted to unroot my device so I can give it to my brother so he can use it for his new phone he has a different company though and wanted to see if he could switch I tried unrooting it but it just wouldn't work and next thing I know my brother factory data resets it without un rooting and now it's stuck on the Samsung s6 screen it won't let me go on recovery but it will let me on odin/download mode is there a way I can fix this.

Synyster_Shadow1 said:
Okay so i had rooted my phone using Iroot and I wanted to unroot my device so I can give it to my brother so he can use it for his new phone he has a different company though and wanted to see if he could switch I tried unrooting it but it just wouldn't work and next thing I know my brother factory data resets it without un rooting and now it's stuck on the Samsung s6 screen it won't let me go on recovery but it will let me on odin/download mode is there a way I can fix this.
Click to expand...
Click to collapse
Yep, go to Sammobile .com or samsung-updates .com and enter your model number to find the stock firmware, download it then flash it in Odin.

Droidriven said:
Yep, go to Sammobile .com or samsung-updates .com and enter your model number to find the stock firmware, download it then flash it in Odin.
Click to expand...
Click to collapse
Yea that's what I tried doing but for the straighttalk or tracfone it shows the stock firmware but it has no way to download it so I can't do that :/

Synyster_Shadow1 said:
Yea that's what I tried doing but for the straighttalk or tracfone it shows the stock firmware but it has no way to download it so I can't do that :/
Click to expand...
Click to collapse
What is the model number? If it shows the firmware you can download it, you just aren't doing something right. Sometimes antivirus blocks downloads.

Droidriven said:
What is the model number? If it shows the firmware you can download it, you just aren't doing something right. Sometimes antivirus blocks downloads.
Click to expand...
Click to collapse
The model number is SM-S906L

Synyster_Shadow1 said:
The model number is SM-S906L
Click to expand...
Click to collapse
Have you tried using Smart Switch? It may restore your stock firmware for you.

Droidriven said:
Have you trued using Smart Switch? It may restore your stock firmware for you.
Click to expand...
Click to collapse
I have. it won't even connect to the phone and this is what my phones keeps showing on the screen when I plug it in and it's all that it's been doing so i dont know what to do

Synyster_Shadow1 said:
I have. it won't even connect to the phone and this is what my phones keeps showing on the screen when I plug it in and it's all that it's been doing so i dont know what to do
Click to expand...
Click to collapse
Unless I'm doing it wrong i have no idea

Synyster_Shadow1 said:
I have. it won't even connect to the phone and this is what my phones keeps showing on the screen when I plug it in and it's all that it's been doing so i dont know what to do
Click to expand...
Click to collapse
When you connect the phone to PC, what is device manager showing for the device name?

Droidriven said:
When you connect the phone to PC, what is device manager showing for the device name?
Click to expand...
Click to collapse
Nothing it doesn't even connect to the device

Synyster_Shadow1 said:
Nothing it doesn't even connect to the device
Click to expand...
Click to collapse
If you can't connect to PC or boot to any modes then you're not gonna be able to flash it. You're device isn't completely dead though, a JTAG might work. Also, flashing via Odin might work whether USB debugging was checked or not, when the system is corrupted bad enough, that doesn't matter because there is nothing there to tell it that it is blocked from flashing.
The debrick from sdcard method for S3 linked below might work for the S6.
forum.xda-developers.com/showthread.php?t=2660566
If you can find someone with the exact same model device that has theirs rooted, you can get them to pull a debrick.img from the device then you can use that debrick.img to create a bootable SDcard to boot the device from it. Then you can restore the device.
You need to understand that the S3 and the S6 are partitioned differently so everywhere in those instructions for S3, when it mentions a file or partition or partition location(mmcblk0), you will have to ignore what it says for the S3 and research your device to make sure that you are using the correct files, partitions and partition locations for the S6 and not the S3. This method may or may not work. You need to find some of the experienced S6 members that might understand this method enough to adapt it to your S6.

Droidriven said:
If you can't connect to PC or boot to any modes then you're not gonna be able to flash it. You're device isn't completely dead though, a JTAG might work. Also, flashing via Odin might work whether USB debugging was checked or not, when the system is corrupted bad enough, that doesn't matter because there is nothing there to tell it that it is blocked from flashing.
The debrick from sdcard method for S3 linked below might work for the S6.
forum.xda-developers.com/showthread.php?t=2660566
If you can find someone with the exact same model device that has theirs rooted, you can get them to pull a debrick.img from the device then you can use that debrick.img to create a bootable SDcard to boot the device from it. Then you can restore the device.
You need to understand that the S3 and the S6 are partitioned differently so everywhere in those instructions for S3, when it mentions a file or partition or partition location(mmcblk0), you will have to ignore what it says for the S3 and research your device to make sure that you are using the correct files, partitions and partition locations for the S6 and not the S3. This method may or may not work. You need to find some of the experienced S6 members that might understand this method enough to adapt it to your S6.
Click to expand...
Click to collapse
So how would I go about finding these people?

Synyster_Shadow1 said:
So how would I go about finding these people?
Click to expand...
Click to collapse
Also the s6 doesn't have an SD card

Synyster_Shadow1 said:
So how would I go about finding these people?
Click to expand...
Click to collapse
In the S6 forum here, start reading through threads that have recently been posted, or other threads where there are guides to unbrick or restore to stock, I'm sure you're smart enough to figure who there is well experienced by how/what members there are posting. The fix for problems aren't always as simple as saying "here's some links, here's some files", sometimes it takes hours/days/weeks of reading to find what you need. Get to looking on the S6 forum for experienced members, reply to their posts in threads to ask them about what you want to know, send them a PM to ask them. I'm trying to help you but I've reached the end of what I know that will help you. Its up to you find what you need, I'm just telling you where to look.