Database Develop

Pls help me understand firmware update possibilities

Hi,
I am reasonably computer literate, but almost new to Android, ROMs, rooting etc.
I live in Australia and have a new P9 bought in an online shop in HK. (You can only buy grey P9's in AU, I wanted silver.)
My P9 is EVA - L19 C636 B150 . I understand what all this means, I've done a couple of day's reading on this forum.
The phone is unlocked, and seems to accept my temporary Kogan SIM all right. But I remember seeing somewhere the word "Vodafone" when I was exploring. I can't find it anymore.
I would like to know if I can expect to receive automatic updates from anywhere. I will not be using Vodafone SIM.
I have read somewhere on this forum that there already is firmware B168 and B170 for L19 C636. When I try Settings/Update/Check for Update there is no update.
If I eventually decide not to wait for automatic update and do it manually, do I have to update first to B168 and then to B170?
I have read about two methods of updating -
1. downloading the update file, pasting it to SD card dload folder, pressing the three keys for 8 seconds, etc. For this method I do not know where to get the update files from.
2. using the Huawei Updater utility available from this forum. I don't understand this process, changing proxy IP address, etc.
Could somebody please explain or point me in the right direction. Thanks

[email protected] said:
Hi,
I am reasonably computer literate, but almost new to Android, ROMs, rooting etc.
I live in Australia and have a new P9 bought in an online shop in HK. (You can only buy grey P9's in AU, I wanted silver.)
My P9 is EVA - L19 C636 B150 . I understand what all this means, I've done a couple of day's reading on this forum.
The phone is unlocked, and seems to accept my temporary Kogan SIM all right. But I remember seeing somewhere the word "Vodafone" when I was exploring. I can't find it anymore.
I would like to know if I can expect to receive automatic updates from anywhere. I will not be using Vodafone SIM.
I have read somewhere on this forum that there already is firmware B168 and B170 for L19 C636. When I try Settings/Update/Check for Update there is no update.
If I eventually decide not to wait for automatic update and do it manually, do I have to update first to B168 and then to B170?
I have read about two methods of updating -
1. downloading the update file, pasting it to SD card dload folder, pressing the three keys for 8 seconds, etc. For this method I do not know where to get the update files from.
2. using the Huawei Updater utility available from this forum. I don't understand this process, changing proxy IP address, etc.
Could somebody please explain or point me in the right direction. Thanks
Click to expand...
Click to collapse
EVA-L19C636B168
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1079/g104/v55731/f1/full/update.zip
EVA-L19C636B170
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1079/g104/v57467/f1/full/update.zip
Here are download to the latest firmwares, u can jump to B170 from B150.
I Think that the latest OTA to L19C636 is B150, these firmwares are direct from the Huawei database.
The easy whay to upgrade manually is:
1. Download B170 update.zip and extract it to desktop.
2. Create a folder on your sd card and name it dload
3. Put the file from the firmware u extracted called update.app in the folder u created on sd card called dload.
4. Open dailpad and type *#*#2846579#*#* and choose option 4 and update.

Thanks very much, Mostar088.
I assume that the SD card can have other stuff on it. Or does it have to be empty?

You can have other stuff on SD Card. No problem.

[email protected] said:
Thanks very much, Mostar088.
I assume that the SD card can have other stuff on it. Or does it have to be empty?
Click to expand...
Click to collapse
Yes u can, it wont wipe anything.
Sent from my HUAWEI VIE-L29 using XDA Labs

OK, I have downloaded and unzipped the package. The update.app is there all right, - almost 3GB - that does not sound like an update in Windows terminology - is it a complete replacement of the original firmware?
I did not find any description of the changes covered by the update. Is it possible to find out somewhere?
One general question - on this forum, is "firmware " exactly the same as "ROM" ?
thanks

[email protected] said:
OK, I have downloaded and unzipped the package. The update.app is there all right, - almost 3GB - that does not sound like an update in Windows terminology - is it a complete replacement of the original firmware?
I did not find any description of the changes covered by the update. Is it possible to find out somewhere?
One general question - on this forum, is "firmware " exactly the same as "ROM" ?
thanks
Click to expand...
Click to collapse
Here is the changelog
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1079/g104/v57467/f1/full/changelog.xml
Rom and firmware is the same, that is the full stock firmware.
Sent from my HUAWEI VIE-L29 using XDA Labs

Thanks again. The B170 update doesn't seem to do much for me. Could you please post the link for B168 - maybe there is something more important in that update.
Is there any system in these updates? Why do they jump from B150 to B168 to B170?

[email protected] said:
Thanks again. The B170 update doesn't seem to do much for me. Could you please post the link for B168 - maybe there is something more important in that update.
Is there any system in these updates? Why do they jump from B150 to B168 to B170?
Click to expand...
Click to collapse
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1079/g104/v55731/f1/full/changelog.xml
All the changes made in B168 are put in B170 to, so it's best to flash B170. Why they jump build nr like that i dont know.
All new firmware and changelog u can find here:
http://forum.xda-developers.com/p9/development/rom-stock-rom-eva-l19c636b168-t3419586
Sent from my HUAWEI VIE-L29 using XDA Labs

I'm new to Huawei. I've recently got myself a P9, supplied by EE in the UK. I'm on C440B138 build. Trying to work out how the firmware versions work, coming from using a Galaxy Note 4 its a little confusing. My phone has no network (EE) branding but in using this build am I locked to EE, can I not manually update? Could someone point me in the right direction as pages like this .... http://forum.xda-developers.com/p9/development/rom-stock-rom-eva-l19c636b168-t3419586 ... seem very overwhelming with firmwares. This build I am using has a security patch level of June 2016. I'm not overly interested in N, it'll eventually roll out but I'd quite like to be a little more up-to-date. Apologies for having to ask, I have looked but I can't find a definitive answer to my question(s). Many thanks in advance.

update for EVA-L09C636?

Hi guys,
Has anyone tried the update listed on this website?
http://hwmt.ru/oth/HWFF/info/view.php
When I searched for the update for my device this was all that came up, anyone tried it?
Cheers

I didnt see C636 in recent updates

stefanwil said:
I didnt see C636 in recent updates
Click to expand...
Click to collapse
There is a EVA-L09C636B361 in the list.

I just tried it the other day. There are two FULL pacakges, but neither works. Installation failed either at 5% or around 40%.

I update the L19 version, you must use Huawei Updater tool.
The L09 I think must works (with the correct URL for that version)
In the L19, exist two versions, 29 and 30 december. The first works, the second no, I dont know why.
Use the FULL versions.
God luck.

henryco11 said:
I update the L19 version, you must use Huawei Updater tool.
The L09 I think must works (with the correct URL for that version)
In the L19, exist two versions, 29 and 30 december. The first works, the second no, I dont know why.
Use the FULL versions.
God luck.
Click to expand...
Click to collapse
My model is Huawei P9 EVA-L09C636
I tried to update like this, it's started updating and got an error while updating then phone rebooted with new update,
but there's lot of errors,
Built Number displays as - NRD90M test-keys
Updater missing in settings
Camera missing
Flash Light not working
Clock missing
File Manger missing
and few more default huawei apps missing.
How do I fix it or downgrade to previous version back?

My Phone is Huawei P9 EVA-L09C636
Even though my phone is L09 I've flashed L19 by following the steps on this thread -
(https://forum.xda-developers.com/mate-8/general/nxt-l09c636b521-official-firmware-guide-t3544729/)
2016.12.29 - EVA-L19C636 - EVA-L19C636B361
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1583/g104/v74666/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...ll/hw/spcseas/update_data_full_hw_spcseas.zip
it's still NRD90M test-keys. but i'm cool with it.

Used P9 - Missing Stock Apps

Hello everyone!
I just bought an used P9 (EVA-L19) in pristine condition. It arrived with the nougat update but it is missing all Huawei apps. I don't think I really mind not having those (less bloat, hurray!), but I really want at least the camera app! What should I try? This thing is full stock (unrooted), and I'd rather keep it that way... Should I just flash the full stock firmware? HiSuite claims my phone is up to date, but I've got no idea how to check what build my current firmware is.
Thanks!

Oooh... the build seems to be NRD90M "test-keys", which appears to be an old beta build from my googling. Do I have to go back to MM and then upgrade to Nougat? Hopefully I can do all that without a custom recovery...

You have an intermediate firmware.
Search here the B378 for C432 if you want the european version (wich is working fine; some other last updates may have some problems - for example, with B383 me and others have problems with the battery).
Where are you from ??

Shymmy said:
You have an intermediate firmware.
Search here the B378 for C432 if you want the european version (wich is working fine; some other last updates may have some problems - for example, with B383 me and others have problems with the battery).
Where are you from ??
Click to expand...
Click to collapse
I'm from Brazil, but I know for a fact this phone isn't brazilian. It comes with a bunch of stuff written in spanish rather than portuguese, and a warranty certificate citing a bunch of spanish-spekaing latin american countries. I'm browsing through the forums and trying to find out what is my Cust yet. But thanks for the response.
Also, if I have to flash something, is it better to stick with Nougat or is Marshmallow more hassle-free?
(I've attached a screenshot of the status screen from Huawei P9 Tool, this is all the data I could gather so far)

I can't read the screenshot ...
On the "About the phone - Version number" what do you have ??
For example, mine has EVA-L19C432B378, where:
-EVA-L19 is the phone model (P9 dual sim);
-C432 is the european version;
-B378 is the firmware version.
Also, you can read that thread too ... https://forum.xda-developers.com/p9/how-to/how-to-downgrade-nrd90m-to-marshmallow-t3541400

Shymmy said:
I can't read the screenshot ...
On the "About the phone - Version number" what do you have ??
For example, mine has EVA-L19C432B378, where:
-EVA-L19 is the phone model (P9 dual sim);
-C432 is the european version;
-B378 is the firmware version.
Also, you can read that thread too ... https://forum.xda-developers.com/p9/how-to/how-to-downgrade-nrd90m-to-marshmallow-t3541400
Click to expand...
Click to collapse
All it says on "Version number" is "NRD90M test-keys". I've read that thread, but to downgrade you need a ROM, and without knowing my Cust ID I'm not sure which ROM I should get.
The screenshot shows my serial number (XVV7N16425001010), the model (EVA-L19 - Dual Sim 32GB Rom 3GB RAM) and a weird build string (eng.jenkin.20161230.130431)

absynte said:
Hello,
do you have dual sim , or single sim and NFC ?
Dual sim: EVA-L19 ou L29
Single sim and NFC EVA-L09 (Européan version)
Click to expand...
Click to collapse
Dual SIM EVA-L19 - No idea if I've got NFC or not. Can't find anything NFC-related on the menus, but it might be that I do not know where to look. Long time Windows Phone user here, just migrated back to Android :laugh:

absynte said:
NFC is an connectivity option.
If you don't have, you have dual sim
Click to expand...
Click to collapse
It does have dual SIM, and is the EVA-L19. So no NFC then. Does it help? I'm currently looking for debranding guides because I can't find what branding this phone originally had.

Oooh well... so far:
1- *#*#2846579#*#* doesn't work (nothing happens), can't enable Manufacturer mode for DC Unlocker
2- The HUAWEI EMUI site doesn't give me a bootloader unlock code, so can't unlock the bootloader with the official method
So, so far, I can't install TWRP, so I can't flash a C432 oeminfo.bin
Also, the Rollback instructions at https://forum.xda-developers.com/p9/how-to/rollback-eva-l19-android-7-0-emui-5-0-t3496091 fail, as the rollback intermediate firmware just fails at 5% claiming to be incompatible with my device.
Aside from blindly trying to flash random firmwares with the three button method, do you guys have ANY ideas at all? I need a rest, just wasted the whole day trying to get this damned thing fixed
Sad thing: even with a borked firmware install this is still orders of magnitude better than my old Lumia 930.
EDIT: GODDAMMIT, BLUETOOTH ALSO DOESN'T WORK!

absynte said:
Ok so you've got to google this or to find on xda some answers.
https://forum.xda-developers.com/p9/how-to/how-to-downgrade-nrd90m-to-marshmallow-t3541400
For exemple....2 or 3 clicks....
bye
Click to expand...
Click to collapse
I'll give the instructions of the first post a try, though they did not work for the OP.
EDIT: AAAAAND the 800mb file is downloading at 28kbps... this won't be fun

I'm not sure if it would've been better to edit the last post or add a new one, so if this is agains the rules (I've read them and couldn't find it), please inform me and I'll change things accordingly... buuuut.... IT WORKED.
The OP on the topic absynte pointed out never really posted the outcome of his issue and it looked like he never got it to work, so here is what I did:
Flashed the zip file
I flashed the zip file linked in this post through starting up with vol up + vol down + power. Exactly like the guy over there it did not solve my issue, but did uncover I had exactly the same build as him (EVA-L19C185B361 - Middle East / Asia)
Flashed the intermediate firmware
I download the correct intermediate firmware (C185B300) from here and flashed the same way. The *#*#... menu did not work (as in the menu itself didn't show up)
Flashed a MM build
I downloaded and flashed C185B180 for whatever reason (could've gone with tha latest MM build right away AFAIK). Worked great, all stock apps were there and so was bluetooth
Let the phone update itself through OTA
It updated itself to B210 (or B220, don't remember well) and then B385. Seems to be working fine, but I haven't given the battery a fair chance (constantly flashing and updating stuff) to judge its performance.
Thanks everyone for the help!

alexanrsousa said:
I'm not sure if it would've been better to edit the last post or add a new one, so if this is agains the rules (I've read them and couldn't find it), please inform me and I'll change things accordingly... buuuut.... IT WORKED.
The OP on the topic absynte pointed out never really posted the outcome of his issue and it looked like he never got it to work, so here is what I did:
Flashed the zip file
I flashed the zip file linked in this post through starting up with vol up + vol down + power. Exactly like the guy over there it did not solve my issue, but did uncover I had exactly the same build as him (EVA-L19C185B361 - Middle East / Asia)
Flashed the intermediate firmware
I download the correct intermediate firmware (C185B300) from here and flashed the same way. The *#*#... menu did not work (as in the menu itself didn't show up)
Flashed a MM build
I downloaded and flashed C185B180 for whatever reason (could've gone with tha latest MM build right away AFAIK). Worked great, all stock apps were there and so was bluetooth
Let the phone update itself through OTA
It updated itself to B210 (or B220, don't remember well) and then B385. Seems to be working fine, but I haven't given the battery a fair chance (constantly flashing and updating stuff) to judge its performance.
Thanks everyone for the help!
Click to expand...
Click to collapse
how u downgrade to MM?

spring80 said:
how u downgrade to MM?
Click to expand...
Click to collapse
I did exactly what I said in the last post: flashed C185B300 (from http://www.carbontesla.com/2016/11/downgrade-huawei-p9-nougat-marshmallow-os-middle-east-russia/), then flashed C185B180 (from http://www.carbontesla.com/2016/11/download-huawei-p9-b180-marshmallow-update-l09l19-middle-east/)

alexanrsousa said:
I did exactly what I said in the last post: flashed C185B300 (from http://www.carbontesla.com/2016/11/downgrade-huawei-p9-nougat-marshmallow-os-middle-east-russia/), then flashed C185B180 (from http://www.carbontesla.com/2016/11/download-huawei-p9-b180-marshmallow-update-l09l19-middle-east/)
Click to expand...
Click to collapse
thanks for your answer my friend , i will try and update u
---------- Post added at 01:56 PM ---------- Previous post was at 01:25 PM ----------
working my friend , but be sure to backup first because u will lost everything

Need to return P9 back to L09C432B504 from c900b300

Hello everyone !
I had a battery drain issue so I wanted to try and change the software before resorting to a battery change, but now my phone is stuck at L09 C900B300 build and it used to be factory L09C432B504. I tried downloading the full package for 501 but the phone does not want to install it as it was "invalid".
Any ideas how I can force the b501 update on the phone ? It's hard to use ADB since the USB-C port on the phone is very worn out and it only maintains data-transfer in a certain position, if it gets shifted even a little bit it breaks the connection.
Thanks in advance !

DenaByteNT said:
Hello everyone !
I had a battery drain issue so I wanted to try and change the software before resorting to a battery change, but now my phone is stuck at L09 C900B300 build and it used to be factory L09C432B504. I tried downloading the full package for 501 but the phone does not want to install it as it was "invalid".
Any ideas how I can force the b501 update on the phone ? It's hard to use ADB since the USB-C port on the phone is very worn out and it only maintains data-transfer in a certain position, if it gets shifted even a little bit it breaks the connection.
Thanks in advance !
Click to expand...
Click to collapse
You did a rollback and you cannot instal Nougat directly back
You must install c432b182 Marshmallow and then let it update by OTAs (with SIM card) to b50x
https://forum.xda-developers.com/showpost.php?p=73131443&postcount=321
Steps 4-9 apply to you (since you are already on c900b300)
---
Don't know what does it mean to you that you changed the software
If you rebranded from c432 to another cust, then you must also rebrand back to c432 by flashing its OEMINFO:
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
---
NOTE: Just saw you previously asked questions about P9 Lite
Pls be aware, this is Huawei P9 subforum, not for P9 Lite (different hardware, different firmwares)
The answer above with links/guides applies to P9, not to P9 Lite
If your question was for P9 Lite, please better search and ask on XDA P9 Lite subforum

Hey !
Thanks for your reply.
I have tried to follow the steps but I need to have the bootloader unlocked and it is discontinued by huawei, and in order to get the code from DC unlocker I need to invest a certain amount of money (id rather hand the phone over to a professional service and pay them and know that I have a fixed phone).
The other issue of the phone is that I cannot open the manufacturer mode on the phone using *#*#2846579#*#* since it does nothing, and I cannot use the calculator since this software does not have a calculator, it doesn't even have a camera app....
So I have contacted huawei support in hopes of getting the bootloader code but I do not hope for too much at this point. What are my other options at this point of handling this on my own ?
Looking forward to your response !

DenaByteNT said:
Hey !
Thanks for your reply.
I have tried to follow the steps but I need to have the bootloader unlocked and it is discontinued by huawei, and in order to get the code from DC unlocker I need to invest a certain amount of money (id rather hand the phone over to a professional service and pay them and know that I have a fixed phone).
The other issue of the phone is that I cannot open the manufacturer mode on the phone using *#*#2846579#*#* since it does nothing, and I cannot use the calculator since this software does not have a calculator, it doesn't even have a camera app....
So I have contacted huawei support in hopes of getting the bootloader code but I do not hope for too much at this point. What are my other options at this point of handling this on my own ?
Looking forward to your response !
Click to expand...
Click to collapse
AFAIK, 'certain amount of money' for Bootloader code from DC Unlocker is only 4 Euros
If you search on XDA (various phones, just about Bootloader unlocking) you may find more online services (several months ago I've seen in some post), but they were more expensive
IMO, you don't need unlocked Bootloader if you are just following the first link, for dload-ing c432b182 without flashing oeminfo....

Update:
Okay the b182 package does not require unlocked bootloader which is great, it took the update and started going up all the way to b395 but it stopped there, no further OTA updates... It is okay to use at this point but I'm still curious to know if there is a way to get to it to update to the b50x version. I did try to use the small update for the b501 but the phone declined it.
Still thank you very much for guiding me through this ! This is a huge weight off my shoulders !

DenaByteNT said:
Update:
Okay the b182 package does not require unlocked bootloader which is great, it took the update and started going up all the way to b395 but it stopped there, no further OTA updates... It is okay to use at this point but I'm still curious to know if there is a way to get to it to update to the b50x version. I did try to use the small update for the b501 but the phone declined it.
Still thank you very much for guiding me through this ! This is a huge weight off my shoulders !
Click to expand...
Click to collapse
In Firmware Finder they have a new method based on eRecovery and changing the DNS server on your local WLAN AP
b50x must be showing as Approved to you for that method
It does not require Bootloader unlocked but no guarantee it would work (I tried with P9 rebranded to AL10 Oreo, managed to change DNS server address, eRecovery connected to but failed to update firmware that way)
There HWOTA method (in few variants) to install FullOTA-MF from Firmware Finder, but unlocked Bootloader is required
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
Btw, if you ever unlocked Bootloader on that phone, just use the same code again (one must save always save the code for future needs)
As of recently there are some Huawei service firmware installations available, that also install by dload (not needed to have Bootloader unlocked)
Huawei P9 EVA-L09C432B505 Firmware 7.0.0 r1 EMUI5.0.4 05013PWB [androidhost.ru].zip
https://androidhost.ru/czc
Huawei P9 EVA-L09C432B504 Firmware Android7.0 EMUI5.0.3 05013PNA androidhost.ru.zip
https://androidhost.ru/6sg
Huawei P9 EVA-L09C432B502 Firmware Android7.0 EMUI5.0.1 05013PWB. androidhost.ru.zip
https://androidhost.ru/3xb
When you download, you will need to unzip
Find Docs and Software subfolders (you may need to untar and unzip Software subfolder again)
In Docs folder there must be Huawei official guide how to install, check if it describes dload method (and what must be un-archived and copied to SD card dload folder from the Software subfloder)
I didn't use it for L09c432 but I successfully unbricked a P9 rebranded to AL10c00 (back to AL10c00 firmware) by such a package, really easy by dload, just by following their HowTo doc from the Docs subfolder

P9 wifi not working after "update"

hey guys i hope you can help me with this lil problem.
I was flashing update with just fail messages so i decide to install the same (eva-l19C6005B135) BUT it was the D007 (my phone has D002) and it was ok, after the update the phone restarts but now the wifi isn't working( it does turn on but doesn't show any wifi available).
btw the phone says D002 is installed (weird) (CUSTC605D002)
everything is just working fine, i restore the net config and restarted the phone but still the same, no wifi
what can i do now ? :/ this isn't my phone

Blackko said:
hey guys i hope you can help me with this lil problem.
I was flashing update with just fail messages so i decide to install the same (eva-l19C6005B135) BUT it was the D007 (my phone has D002) and it was ok, after the update the phone restarts but now the wifi isn't working( it does turn on but doesn't show any wifi available).
btw the phone says D002 is installed (weird) (CUSTC605D002)
everything is just working fine, i restore the net config and restarted the phone but still the same, no wifi
what can i do now ? :/ this isn't my phone
Click to expand...
Click to collapse
You mean eva-l19C6005B135 (c605), not eva-l19C6005B135 (c6005)?
Anyway, this is old Android 6 / EMUI 4, why don't you upgrade to Android 7?
If you have valid SIM card and WiFi, no OTA for update coming?
Check under Settings / System Updates.
You can also check from HiSuite if it offers you a newer version to install
Also, switch off, connect to charger, press and keep Vol+, switch on by Pow, and check from eRecovery: Download and install latest firmware and recovery, what it offers to install
You can also try to install by DLOAD, L19 c605 eg b394 - for DLOAD it must be FullOTA, MF-PV (must be PV), package number #109400, as on screenshot from Firmware Finder

zgfg said:
You mean eva-l19C6005B135 (c605), not eva-l19C6005B135 (c6005)?
Anyway, this is old Android 6 / EMUI 4, why don't you upgrade to Android 7?
If you have valid SIM card and WiFi, no OTA for update coming?
Check under Settings / System Updates.
You can also check from HiSuite if it offers you a newer version to install
Also, switch off, connect to charger, press and keep Vol+, switch on by Pow, and check from eRecovery: Download and install latest firmware and recovery, what it offers to install
You can also try to install by DLOAD, L19 c605 eg b394 - for DLOAD it must be FullOTA, MF-PV (must be PV), package number #109400, as on screenshot from Firmware Finder
Click to expand...
Click to collapse
the phone doesn't show any update to nougat, im stock at C605B135, but i do remember that it showed an update a while ago, but not now, weird thing.
well, if i try to install with the dload method the phone says "Incompatibility with current version. Please download the correct update package"
I tried the B380 and 397, i will try the 394 that you suggest.
thanks for the help buddy, i will update the post later with the results
PD: can i download this rom from another site or this is the only one? it always fails at 60-70% and it is really slow, 3mb download, i have 30mb

zgfg said:
You mean eva-l19C6005B135 (c605), not eva-l19C6005B135 (c6005)?
Anyway, this is old Android 6 / EMUI 4, why don't you upgrade to Android 7?
If you have valid SIM card and WiFi, no OTA for update coming?
Check under Settings / System Updates.
You can also check from HiSuite if it offers you a newer version to install
Also, switch off, connect to charger, press and keep Vol+, switch on by Pow, and check from eRecovery: Download and install latest firmware and recovery, what it offers to install
You can also try to install by DLOAD, L19 c605 eg b394 - for DLOAD it must be FullOTA, MF-PV (must be PV), package number #109400, as on screenshot from Firmware Finder
Click to expand...
Click to collapse
the same error... "Incompatibility with current version. Please download the correct update package" with the version that you said, i dont know what to do now
here are the steps that i did:
1-downloaded update.zip (just this file)
1.1 unzip it
2-put it on sd(dload folder)
3-enter download mode and try to install it
do i need to download the other files?
do i need to format my sd again? because it have some other files in it, but with the ota b135 it jus install it fine over and over again

Blackko said:
the same error... "Incompatibility with current version. Please download the correct update package" with the version that you said, i dont know what to do now
Click to expand...
Click to collapse
Sorry, don't know the situation with c605 ROMs.
IMO, you should try to flash FullOTA-MF-PV but the MM buiild, but I cannot find by Firmware Finder any MM PV build for your c605 cust (hence I also don't know how did you flash that D007 at the first place?!)
You could also rebrand to eg c432, there are many more stock firmwares for c432 - but for rebranding you will first need to unlock Bootloader
PS: For DLOAD, you must download and put to the DLOAD folder all update* files you find for the given build, not just the first update.zip file- if you didn't do so, that was maybe the reason for your issues with WiFi

zgfg said:
Sorry, don't know the situation with c605 ROMs.
IMO, you should try to flash FullOTA-MF-PV but the MM buiild, but I cannot find by Firmware Finder any MM PV build for your c605 cust (?!)
You could also rebrand to eg c432, there are many more stock firmwares for c432 - but for rebranding you will first need to unlock Bootloader
PS: For DLOAD, you must download and put to the DLOAD folder all update* files you find for the given build, not just the first update.zip file- if you didn't do so, that was maybe the reason for your issues with WiFi
Click to expand...
Click to collapse
how can i unlock the BL? the only method that i think will work is send an email to huawei as a request for the code :/ or paying 20$ for chimera software and unlock it(i don't know if it will work anyway)
but for now im going to download all the files again for a second try and yes, im sure that's why my wifi if failing, i downloaded a ota (not full ota) with a different D007 (mine is D002) because there is not any MM rom for c605 just that one from firmware finder rewrite (desktop version)

Blackko said:
hey guys i hope you can help me with this lil problem.
I was flashing update with just fail messages so i decide to install the same (eva-l19C6005B135) BUT it was the D007 (my phone has D002) and it was ok, after the update the phone restarts but now the wifi isn't working( it does turn on but doesn't show any wifi available).
btw the phone says D002 is installed (weird) (CUSTC605D002)
everything is just working fine, i restore the net config and restarted the phone but still the same, no wifi
what can i do now ? :/ this isn't my phone
Click to expand...
Click to collapse
Please check older threads under the same P9 Q/A subforum (and/or in the Guides subforum) where you opened your own thread - every week or so somebody asks the same questions about codes for Bootloader (just curious why nobody wants first to invest his own time to search for the answers
Not specific for P9 but same for the other Huawei/Mate models (excluding the newest models released alreadyvwith Pie)
Hint: DC Unlocker or Ministry of solutions, price is not 20 but 4 or 5 Euros

zgfg said:
Please check older threads under the same P9 Q/A subforum where you opened your own thread - every week or so somebody asks the same questions about codes for Bootloader (just curious why nobody wants first to invest some of his own time to search for the answers
And/or in the Guides subforum.
Not only for P9 but same for the other Huawei/Mate models (excluding the newest models eleased alreadyvwith Pie
Hint: DC Unlocker or Ministry of solutions, price is not 20 vut 4 or 5 Euros
Click to expand...
Click to collapse
ok thx budd, where do i have to unzip the other files? like data and public data etc, in the same dload folder?

Blackko said:
ok thx budd, where do i have to unzip the other files? like data and public data etc, in the same dload folder?
Click to expand...
Click to collapse
All three update*.zip files must not be unzipped, just copy them as zip files to DLOAD folder, do not create any subfolders
Do not use L09 file, just update.zip and two others with L19 and public in the name - see screenshot
Dlete DLOAD and create again, to make sure something hidden did not remain
And for Bootloader codes you have:
https://www.dc-unlocker.com/
https://ministryofsolutions.com/paid-services

zgfg said:
All three update*.zip files must not be unzipped, just copy them as zip files to DLOAD folder, do not create any subfolders
Do not use L09 file, just update.zip and two others with L19 and public in the name - see screenshot
Dlete DLOAD and create again, to make sure something hidden did not remain
And for Bootloader codes you have:
https://www.dc-unlocker.com/
https://ministryofsolutions.com/paid-services
Click to expand...
Click to collapse
thx for the help, this is all the info i need, you know alot of this

Blackko said:
thx for the help, this is all the info i need, you know alot of this
Click to expand...
Click to collapse
Were you able to update/DLOAD now?

zgfg said:
Were you able to update/DLOAD now?
Click to expand...
Click to collapse
well, i think i bricked my device :/ i unlocked it via chimera, and installed a rom from another country without rebrand it first, after that it just boot to a recovery screen with the option of factory reset but it trows an error,
y flashed the rom b135 that i flash before and the phone install it and everything was ok but now, it doesn't boot, im stuck at the warning screen "your device has been unlocked and can't be thrusted" and the phone says booting now but nothing happends, i can't even flash the same rom again, im stuck :/
PD:the chimera or hi suit doesn't recognize the phone

Blackko said:
well, i think i bricked my device :/ i unlocked it via chimera, and installed a rom from another country without rebrand it first, after that it just boot to a recovery screen with the option of factory reset but it trows an error,
y flashed the rom b135 that i flash before and the phone install it and everything was ok but now, it doesn't boot, im stuck at the warning screen "your device has been unlocked and can't be thrusted" and the phone says booting now but nothing happends, i can't even flash the same rom again, im stuck :/
PD:the chimera or hi suit doesn't recognize the phone
Click to expand...
Click to collapse
Of course that flashing another cust without rebranding first, bricks the phone.
I just wonder how you know now that, why you didn't take time to read or ask about in advance (and I think, in previous answers I was also writing you about)
Sorry, I'm busy and cannot help you further.
There are guides on XDA, but maybe better pay for DC-Phoenix or Ministry of solutions to unbrick the phone and to install you Nougat like c432 b504

download http://download-c1.huawei.com/downlo...52&siteCode=np
Create a file dload in SD card and move file Update.app in dload .
Use method 3 Buttons To install.