Related
Hello all,
I read now the warning post and I understand now that probably I shouldn't have done it (so please be gentle ).. however maybe someone can still help me with my situation:
I've rooted my Galaxy Note with ClockworkMod recovery successfully and then busybox.
Then I went to recovery mode again (after restarting the phone), however it loaded Android regular recovery mode (not Clockwork), so I installed Clockwork again and without restarting performed WIPE DATA (maybe that was also a mistake?). After it was finished it restarted by itself and now its in the following status:
- stucks at GALAXY NOTE N7000 logo. Sometimes blinks, but never goes beyond it.
- Recovery mode exactly same - stuck at logo.
- when plugging USB it will show the battery, but it's like stuck then.
- Tried download mode, but it's stuck at Downloading... forever.
I couldn't find the exact case as mine, that it restarted by itself and stuck at logo now.
I backed up everything, the previous ROM and etc.
I am aware of the bricking bug of ICS, however I had the ClockworkMod installed, so what did I do wrong??
And most importantly, what should I do now? Can I do something via the download mode? I don't think Odin recognizes any connected device when I plug in the USB, but I don't know how to check if it does or not..
Thanks in advance!
Switch to download mode, connect to PC and install a stock JB (be sure to install the USB drivers before).
Make a snapshot of the errors an post it here.
http://forum.xda-developers.com/showthread.php?t=1424997
May be this helps ...
Just flash a new stock rom..
Sent from my GT-N7000 using xda premium
i believe u use wrong kernal so it's stuck ！ if u don't ever do any factory reset or wipes then u're stillsafe ！
if u do so ? then just follow the instructions above given by the 2members here ：p
if u still haven't do any wipes n factory reset then look for philz safe kernal wif ur rom version flash it n let it update for mins
n ur phone will resume operation ！
Trying
alvinhaw said:
i believe u use wrong kernal so it's stuck ！ if u don't ever do any factory reset or wipes then u're stillsafe ！
if u do so ? then just follow the instructions above given by the 2members here ：p
if u still haven't do any wipes n factory reset then look for philz safe kernal wif ur rom version flash it n let it update for mins
n ur phone will resume operation ！
Click to expand...
Click to collapse
Trying all that right now, will keep you posted.
what is my stock ROM?
whatever61 said:
Trying all that right now, will keep you posted.
Click to expand...
Click to collapse
I don't understand this.. my stock ROM was:
Baseband Version: N7000XXLB2
Kernel Version: 2.6.35.7-N7000XXLC1-CL1003701 [email protected] #2
Build number: GINGERBREAD.XXLC1
I don't know what coutnry, I bought it from Netherlands, I live in Belgium, but it could be from any country in the region!
I cannot find this one exactly. I find many with N7000XXLB2 and many with N7000XXLC1.
Which one should I choose?
Also, can I install a JB or ICS directly?
Please let me know I'm doing it right (cause this is getting really insanely ridicilous):
1. I install PhilZ recovery mode via the phone recovery mode.
2. I install a stock ROM (I tried many) via Odin download mode.
All the time stuck as Galaxy N7000 logo. Never goes past it.
Every time I install a stock ROM it also removes the Philz recevory mode, but maybe that's ok..
Anything I'm doing wrong??
Why don't you follow my advice from second post and then show us a snapshot of PC Odin.
No need for Philz when installing a stock Rom with PC Odin (it's always deleted).
And tell us what Rom you install.
ThaiDai said:
Why don't you follow my advice from second post and then show us a snapshot of PC Odin.
No need for Philz when installing a stock Rom with PC Odin (it's always deleted).
And tell us what Rom you install.
Click to expand...
Click to collapse
So I don't wipe anything and just go to download mode and install a PDA file of a STOCK ROM, that's it?
I tried that, but now I will be more specific (and in another guide they say to do some steps before, so its very confusing already).
I also asked above how do I know which ROM I should install?
and also, how do I get errors log? there were no errors when I was installing the PDA..
whatever61 said:
So I don't wipe anything and just go to download mode and install a PDA file of a STOCK ROM, that's it?
I tried that, but now I will be more specific (and in another guide they say to do some steps before, so its very confusing already).
I also asked above how do I know which ROM I should install?
and also, how do I get errors log? there were no errors when I was installing the PDA..
Click to expand...
Click to collapse
Just let THAIDAI knows which stock rom u're flashing !
alvinhaw said:
Just let THAIDAI knows which stock rom u're flashing !
Click to expand...
Click to collapse
Ok, here we go.
I was trying with ROM: N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5
This is what I got from Odin (I hope that's what you meant by snapshot and not actual screenshot or something ):
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> factoryfs.img
<ID:0/008> NAND Write Start!!
<ID:0/008> zImage
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> cache.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
This is something new: just after it was completed it booted to recovery mode and gave me the following message:
Android system recovery <3e>
Finding update package
bla bla
Successfuly installed package.
Wiping cache..
Formatting /cache
Cache wipe complete.
E:failed to mount /data (unknown error: 0)
your storage not prepared yete, please use UI menu to format and reboot actions.
copy application failed.
Applying multi-CSC
Can't access to '/system/csc/ATO/system'
Successfully applied multi-CSC.
and it still doesn't boot.. gonna try another ROM now and post here the results.
Now tried with:
N7000XXLRI_N7000XXLRB_N7000XEFLP2_HOME.tar.md5
This is the original original ROM that I had when I just bought the phone.3
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRI_N7000XXLRB_N7000XEFLP2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.img
<ID:0/008> NAND Write Start!!
<ID:0/008> factoryfs.img
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> zImage
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
No going into recovery mode after restart this time and still same problem.
when you flash a stock rom with pc odin, the phone may not boot. If you have flashed a GB rom then when you are stuck at logo enter stock recovery with three button combo and then wipe data factory reset, wipe cache and then reboot.
I flashed a stock rom as explained above, not a GB. I tried wiping cache and all data through recovery. Nothing helps. You say it might not boot, so how do I make it boot with Stock ROM?
stock roms can be ginger bread (GB), or ICS or JB (jelly Bean)
flash a GB stock rom, wait for the proceedure to finish completely, when you see its not booting then use three buttons to get into stock recovery and then wipe then reboot
rraaka said:
stock roms can be ginger bread (GB), or ICS or JB (jelly Bean)
flash a GB stock rom, wait for the proceedure to finish completely, when you see its not booting then use three buttons to get into stock recovery and then wipe then reboot
Click to expand...
Click to collapse
I already did, the last post was a GB, i tried to wipe out everything afterwards also.
ThaiDai, please see my replies, I did as you requested..
Thanks
whatever61 said:
I've rooted my Galaxy Note with ClockworkMod recovery successfully and then busybox.
Then I went to recovery mode again (after restarting the phone), however it loaded Android regular recovery mode (not Clockwork), so I installed Clockwork again and without restarting performed WIPE DATA ...
....I am aware of the bricking bug of ICS, however I had the ClockworkMod installed, so what did I do wrong??
Thanks in advance!
Click to expand...
Click to collapse
By "ClockworkMod" you mean CWM.zip right? This is a temporary recovery that disappears upon reboot. It also LETHAL to wipe with when running on top of a stock ICS kernel.
So to sum up;-
You were running Stock ICS.
You flashed CWM.zip (from YouTube or where ever) from stock 3e recovery and then flashed Root/busybox file.
Booted back into stock recovery, flashed CWM.zip again and performed wipe data/factory reset with it.
How am I going so far?
Bad news - you have most likely superbricked your device.
If so,new MOBO or repartition is only way out now
it might be mess up.. try get 5files wif bootloader n place it accordingly in odin .
go here to study http://forum.xda-developers.com/showthread.php?t=1424997
shoey63 said:
By "ClockworkMod" you mean CWM.zip right? This is a temporary recovery that disappears upon reboot. It also LETHAL to wipe with when running on top of a stock ICS kernel.
So to sum up;-
You were running Stock ICS.
You flashed CWM.zip (from YouTube or where ever) from stock 3e recovery and then flashed Root/busybox file.
Booted back into stock recovery, flashed CWM.zip again and performed wipe data/factory reset with it.
How am I going so far?
Bad news - you have most likely superbricked your device.
If so,new MOBO or repartition is only way out now
Click to expand...
Click to collapse
Yep, emmc bricked. Send it to servicecenter, they repaired it for free, for me. Or you can do the workaround http://forum.xda-developers.com/showthread.php?t=1667886 , but i dont would do that, as you will get many freezes maybe. Thats very annoying.
Regards
Hello Thanks in Advance For Your time
My n7000 had r5 kernel with carbon rom 4.4. I Chose to reboot to system from kernel it asked me 1)no 2)fix system reboot i chose 2 and i got stuck at reboot loop but i could access recovery and download mode.
then i try to install philz_touch_6.07.9-n7000 after wiping data cache and dalvik through recovery and rebooted back to philz recovery
after then i flash [ROM][4.4.2] CyanogenMod 11.0 [OFFICIAL][NIGHTLIES] after wiping data cache and dalvik
and i got stuck at samsung logo cant get into recovery mode but can access download mode
i tried to reflash philz kernel through odin but it says
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I cant even charge my phone it shows 100% battery when i plug in
Please help Thanks in advance
davslove said:
Hello Thanks in Advance For Your time
My n7000 had r5 kernel with carbon rom 4.4. I Chose to reboot to system from kernel it asked me 1)no 2)fix system reboot i chose 2 and i got stuck at reboot loop but i could access recovery and download mode.
then i try to install philz_touch_6.07.9-n7000 after wiping data cache and dalvik through recovery and rebooted back to philz recovery
after then i flash [ROM][4.4.2] CyanogenMod 11.0 [OFFICIAL][NIGHTLIES] after wiping data cache and dalvik
and i got stuck at samsung logo cant get into recovery mode but can access download mode
i tried to reflash philz kernel through odin but it says
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I cant even charge my phone it shows 100% battery when i plug in
Please help Thanks in advance
Click to expand...
Click to collapse
You can't flash Philz Touch 6 using odin.
You need to flash PhilZ kernel 5, odin version.
link here:
http://d-h.st/users/philz_touch/?fld_id=16061#files
Hope you can work it out.
davslove said:
Hello Thanks in Advance For Your time
My n7000 had r5 kernel with carbon rom 4.4. I Chose to reboot to system from kernel it asked me 1)no 2)fix system reboot i chose 2 and i got stuck at reboot loop but i could access recovery and download mode.
then i try to install philz_touch_6.07.9-n7000 after wiping data cache and dalvik through recovery and rebooted back to philz recovery
after then i flash [ROM][4.4.2] CyanogenMod 11.0 [OFFICIAL][NIGHTLIES] after wiping data cache and dalvik
and i got stuck at samsung logo cant get into recovery mode but can access download mode
i tried to reflash philz kernel through odin but it says
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I cant even charge my phone it shows 100% battery when i plug in
Please help Thanks in advance
Click to expand...
Click to collapse
i had the same problem yesterday.
i solved it by changing usb cable and trying different usb port and using odin 3.09 with stock rom file (jb 4.1.2).
after flash boot into recovery and flash this philz file : PhilZ-cwm6-XXLTA-ATL-5.15.0-signed.zip
hope this help you.
cant flash cyanogenmod 11
thx a lot got recovery but i am unable to flash cyanogenmod 11 and y is the battery status always 100% in recovery and normal switched off charging
Does it anything to do with the battery? can i install rom with charger plugged in if no battery charge coz it not charging
i tried installing carbon rom and cyanogenmod 11 but it reboots after displaying installing package
davslove said:
thx a lot got recovery but i am unable to flash cyanogenmod 11 and y is the battery status always 100% in recovery and normal switched off charging
Does it anything to do with the battery? can i install rom with charger plugged in if no battery charge coz it not charging
i tried installing carbon rom and cyanogenmod 11 but it reboots after displaying installing package
Click to expand...
Click to collapse
If you have cm11 installed. Reboot to recovery. Do a factory reset.
Sent from my Nexus 5 using Tapatalk
AndroidSlave said:
If you have cm11 installed. Reboot to recovery. Do a factory reset.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
cant get into recovery mode tried installing stock rom using odin installed it successfully but no solution tried installing it with pit file still nothing
my battery has no charge and its not charging maybe that is the issue?
tried upgrading with kies using tools>firmware upgrade and initialisation but it says gt-n7000 does not support initialisaztion
currently i am stuck at empty battery icon with refresh circle and when i try to go into recovery mode i see android icon with blue cirle refreshing for a second and cell reboots to same empty battery icon with a refresh circle
Pleasssssssssssssssse HELP
davslove said:
cant get into recovery mode tried installing stock rom using odin installed it successfully but no solution tried installing it with pit file still nothing
my battery has no charge and its not charging maybe that is the issue?
Click to expand...
Click to collapse
After flashing stock rom via odin you need to boot into recovery. Then wipe cache and data. It is better to glash Philz kernel odin version after flashing stock rom. Then get to recovery and wipe.
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
After flashing stock rom via odin you need to boot into recovery. Then wipe cache and data. It is better to glash Philz kernel odin version after flashing stock rom. Then get to recovery and wipe.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Hey thx
i wiped data and cache using recovery but stuck at reboot next what?
i can access recovery and download mode both now
I would try to use Philz recovery to do 'clean to install rom' then flash a stock based custom rom.zip.
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
I would try to use Philz recovery to do 'clean to install rom' then flash a stock based custom rom.zip.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Tried that stuck at the same
Problems i am facing currently
1)cant operate phone with battery it gives no response
2)when i plug in battery doesnt charge battery status shows 100%
davslove said:
Tried that stuck at the same
Problems i am facing currently
1)cant operate phone with battery it gives no response
2)when i plug in battery doesnt charge battery status shows 100%
Click to expand...
Click to collapse
you need to describe more detail what rom you flashed and what error it gave.
With little info there is no way to help.
forest1971 said:
you need to describe more detail what rom you flashed and what error it gave.
With little info there is no way to help.
Click to expand...
Click to collapse
at stock recovery tried installing philz 6.25 zip using rcovery got status 7 error
then installed philz using odin but now while installing latest carbon after wipe phone reboots after displaying installing package
tried installing philz 6.25 from philz recovery shows same reboots after displaying installing package
davslove said:
at stock recovery tried installing philz 6.25 zip using rcovery got status 7 error
then installed philz using odin but now while installing latest carbon after wipe phone reboots after displaying installing package
tried installing philz 6.25 from philz recovery shows same reboots after displaying installing package
Click to expand...
Click to collapse
You did not read enough on what is needed to install 4.4.2. Rule of thumb: always read and follow rom flash instruction carefully before you tried to install a new rom!
Btw, Philz Touch recovery will not work now. You need to use Philz Kernel with recovery.
You need to read more to figure these things out before getting yourself into more troubles. If you cannot understand instruction well, then better stay with stock or stock-based 4.12 to be safe. Cheers
forest1971 said:
You did not read enough on what is needed to install 4.4.2. Rule of thumb: always read and follow rom flash instruction carefully before you tried to install a new rom!
Btw, Philz Touch recovery will not work now. You need to use Philz Kernel with recovery.
You need to read more to figure these things out before getting yourself into more troubles. If you cannot understand instruction well, then better stay with stock or stock-based 4.12 to be safe. Cheers
Click to expand...
Click to collapse
sorry brother me being noob can you please brief me stepwise what i need to do and if possible link me
i will describe my current situation i am on philz touch 5 can access recovery and download
Please Help me!
i promise i will read carefully and do it as you say be my saviour
davslove said:
sorry brother me being noob can you please brief me stepwise what i need to do and if possible link me
i will describe my current situation i am on philz touch 5 can access recovery and download
Please Help me!
i promise i will read carefully and do it as you say be my saviour
Click to expand...
Click to collapse
From Philz recovery you can do "clean to install rom" then flash a 4.1.2 custom rom. Then you should be good.
If you want 4.4.2 then you need to flash raw4 kernel, then reboot into recovery (not to system) then flash the 4.4.2 rom.
BTW, as I said, read instruction carefully from the rom thread that you want and follow exactly the instruction by the rom dev.
forest1971 said:
From Philz recovery you can do "clean to install rom" then flash a 4.1.2 custom rom. Then you should be good.
If you want 4.4.2 then you need to flash raw4 kernel, then reboot into recovery (not to system) then flash the 4.4.2 rom.
BTW, as I said, read instruction carefully from the rom thread that you want and follow exactly the instruction by the rom dev.
Click to expand...
Click to collapse
Tried installing [ROM][4.1.2][XXLTC]TouchWizLite v1.6[05MAR2014] after
3. On CWM Recovery again, Go to Wipe Data/Factory Reset -> Wipe Data/Factory Reset.
4. Go to Mounts and Storage -> Format /system
5. Go to Mounts and Storage -> Format /preload
but i am unable to install it stuck after opening package > installing package > cell reboots
i am on dev preferred PhilZ-cwm6-XXLTA-ATL-5.15.0-signed.zip
y is that i cant operate using battery
and when i plugin battery status shows 100%
is this some hardware isuue?
davslove said:
Tried installing [ROM][4.1.2][XXLTC]TouchWizLite v1.6[05MAR2014] after
3. On CWM Recovery again, Go to Wipe Data/Factory Reset -> Wipe Data/Factory Reset.
4. Go to Mounts and Storage -> Format /system
5. Go to Mounts and Storage -> Format /preload
but i am unable to install it stuck after opening package > installing package > cell reboots
i am on dev preferred PhilZ-cwm6-XXLTA-ATL-5.15.0-signed.zip
Click to expand...
Click to collapse
Try with another rom or another download. Do 'clean to install' as I said and also wipe dalvik cache (under advanced menu).
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
Try with another rom or another download. Do 'clean to install' as I said and also wipe dalvik cache (under advanced menu).
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Dont mind but any you will suggest will be good
forest1971 said:
Try with another rom or another download. Do 'clean to install' as I said and also wipe dalvik cache (under advanced menu).
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Tried installing other 4.1.2 roms like paranodroid utacka but couldnt install phone reboots after opening package > installing package
might be some other isuue?
because i cant charge battery and can operate using plugin how to fix that?
even stock jb rom doesnt fix it please help me invoke your 6 senses get me a proper fix?
Please aomeone help please
Hello, I am trying to get rid of Cyanogem mod because many apps don't work (Netflix ) but it's giving me this error everytime.
Code:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It no longer boots at this point, but still shows cyanogem mod logo.
I can still acess Clockwork recovery
Kies drivers updated
Original usb cable, tried changing ports too
Odin set up correctly, version 3.09
Still able to get download mode done
I have tried everything i could find on google, still nothing, i'm really getting worried here
Phone screen on download mode :
ODIN MODE
PRODUCT NAME: GT-I8190L
CUSTOM BINARY DOWNLOAD : YES(4 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CUSTOM Modem BINARY !!
HW REV: 0X5
thanks in advance
ppgab said:
Hello, I am trying to get rid of Cyanogem mod because many apps don't work (Netflix ) but it's giving me this error everytime.
Code:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It no longer boots at this point, but still shows cyanogem mod logo.
Kies drivers updates
Original usb cable, tried changing ports too
Odin set up correctly, version 3.09
Still able to get download mode one
I have tried everything i could find on google, still nothing, i'm really getting worried here
thanks in advance
Click to expand...
Click to collapse
You must download the original rom from SamMobile, install it through Odin 3.0.7 and reboot. Then install again through Odin the Recovery and through Recovery your new Rom. :good:
Open task manager on your computer and make sure that nothing with kies is running.
If you're on f2fs you can also try to format system, cache, data back to ext4 from recovery before using Odin.
tys0n said:
Open task manager on your computer and make sure that nothing with kies is running.
If you're on f2fs you can also try to format system, cache, data back to ext4 from recovery before using Odin.
Click to expand...
Click to collapse
You mean format using clockwork recovery? i dont know much about this subject
Do you know if i can install trough external sd using cw recovery mod?
ppgab said:
You mean format using clockwork recovery? i dont know much about this subject
Do you know if i can install trough external sd using cw recovery mod?
Click to expand...
Click to collapse
Yes. If you're on cm from Novafusion the system partition is on f2fs by default. Not sure of how Odin likes that.
If you mean install zips from external, then yes you can.
tys0n said:
Yes. If you're on cm from Novafusion the system partition is on f2fs by default. Not sure of how Odin likes that.
If you mean install zips from external, then yes you can.
Click to expand...
Click to collapse
edit: the issue was Odin 3.09, i downloaded 3.07 as the guy said above and it worked ^^
thank you all for the time
This thread can be closed/Solved.
Hello,
I tried to Update my Samsung S3 LTE to the I9305XXUFNI3_I9305DBTFNI3_I9305XXUFNI3 4.4.4 Kitkat stock firmware. My phone had JB 4.3 installed with VD2 branding.
I was using Odin 3.07. But after the flashing procedure my device is stuck at the boot animation screen. I can still access download and recovery mode.
Here is what I tried chronologically (with no success)
Wiped cache and data
Flashed the 4.4.4 stock firmware again
Installed CWMOD and wiped cache and data, Dalvik cache
Installed Omni 4.4.4 with gapps-kk-20140606-signed and later CM11 with the same result stucking at boot animation.
The device isn't rooted IMEI is saved according to this guideline http://forum.xda-developers.com/showthread.php?t=1946915. Unfortunately there is no recovery of the 4.3 rom available, however I think a downgrade is no longer possible because of the new bootloader? Odin givs me SW rev check failed when trying that.
I would really appreciate if somebody has any guess waht else I could do to resolve that.
Thanks,
Jon
jon192694 said:
Hello,
I tried to Update my Samsung S3 LTE to the I9305XXUFNI3_I9305DBTFNI3_I9305XXUFNI3 4.4.4 Kitkat stock firmware. My phone had JB 4.3 installed with VD2 branding.
I was using Odin 3.07. But after the flashing procedure my device is stuck at the boot animation screen. I can still access download and recovery mode.
Here is what I tried chronologically (with no success)
Wiped cache and data
Flashed the 4.4.4 stock firmware again
Installed CWMOD and wiped cache and data, Dalvik cache
Installed Omni 4.4.4 with gapps-kk-20140606-signed and later CM11 with the same result stucking at boot animation.
The device isn't rooted IMEI is saved according to this guideline http://forum.xda-developers.com/showthread.php?t=1946915. Unfortunately there is no recovery of the 4.3 rom available, however I think a downgrade is no longer possible because of the new bootloader? Odin givs me SW rev check failed when trying that.
I would really appreciate if somebody has any guess waht else I could do to resolve that.
Thanks,
Jon
Click to expand...
Click to collapse
Firstly I would recommend to download another rom available to our terminals-the XEO from here:http://samsung-updates.com/device/?id=GT-I9305 This is a 4.4.4 firmware for I9305-Poland ,flash through Odin and see what happens.
viktorak said:
Firstly I would recommend to download another rom available to our terminals-the XEO from here:samsung-updates.com/device/?id=GT-I9305 This is a 4.4.4 firmware for I9305-Poland ,flash through Odin and see what happens.
Click to expand...
Click to collapse
Thanks for your answer, I flashed the Polish version but no change it still keeps stuck at the boot logo animation. Any further tips?
jon192694 said:
Thanks for your answer, I flashed the Polish version but no change it still keeps stuck at the boot logo animation. Any further tips?
Click to expand...
Click to collapse
You said you have CWMRecovery installed?Now you could flash thru recovery a custom Rom from this thread:http://www.htcmania.com/showthread.php?t=738977
You try whith 4.1.2 firmware pre-rooted,this is a modificated firmware containing the Knox bootloader.Theoretically there should be no problem.The phone should boot.
Then we'll see.
viktorak said:
You said you have CWMRecovery installed?Now you could flash thru recovery a custom Rom from this thread:htcmania.com/showthread.php?t=738977
You try whith 4.1.2 firmware pre-rooted,this is a modificated firmware containing the Knox bootloader.Theoretically there should be no problem.The phone should boot.
Then we'll see.
Click to expand...
Click to collapse
Thank very much you, that brang my phone back to life! I had to use twrp recovery, cwm wasn't supporting the zip.
What is different with this packages? I tried to load omni 4.4.4 again but it is stuck again at boot animation. Is Kitkat also available as Zip package for recovery like the packages you linked? In the thread it only goes up to 4.3.
jon192694 said:
Thank very much you, that brang my phone back to life! I had to use twrp recovery, cwm wasn't supporting the zip.
What is different with this packages? I tried to load omni 4.4.4 again but it is stuck again at boot animation. Is Kitkat also available as Zip package for recovery like the packages you linked? In the thread it only goes up to 4.3.
Click to expand...
Click to collapse
Hi,mate,this is a kind of downgrade,but not exactly,becuse contain Knox BL/ bootloader/.
Wait wait you must go back to 4.1.2 version.Then if you want- you can flash back 4.4.4 downloaded from the official website of Samsung.
Use Odin ,but don`t forget to kill all Kies process before flashing.
viktorak said:
Hi,mate,this is a kind of downgrade,but not exactly,becuse contain Knox BL/ bootloader/.
Wait wait you must go back to 4.1.2 version.Then if you want- you can flash back 4.4.4 downloaded from the official website of Samsung.
Use Odin ,but don`t forget to kill all Kies process before flashing.
Click to expand...
Click to collapse
Unfortunately that's not working. when flashing 4.4.4 through Odin I have the same result as before. Only the 4.1.2 from your link is working
Well,let.'s trying to flash first a 4.3 Stock rom thru Odin.Try using Odin 3.09 attached here.
viktorak said:
Well,let.'s trying to flash first a 4.3 Stock rom thru Odin.Try using Odin 3.09 attached here.
Click to expand...
Click to collapse
Unfortunately that's not working, I think because of the new bootloader. See Odin log below:
Code:
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305XXUEMKC_I9305DBTEMJ4_I9305XXUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> SingleDownload.
<ID:0/022> sboot.bin
<ID:0/022> NAND Write Start!!
<ID:0/022> FAIL!
<ID:0/022>
<ID:0/022> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ODIN on phone says: SW REV. CHECK FAIL. DEVICE:3. BINARY:2
Well, let's trying wipes Dalvic, cache and Factory reset,then flashing a Stock 4.4.4.
viktorak said:
Well, let's trying wipes Dalvic, cache and Factory reset,then flashing a Stock 4.4.4.
Click to expand...
Click to collapse
That brings me to the same fault as before - stuck at boot animation. Odin runs without error:
Code:
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305XXUFNI3_I9305DBTFNI3_I9305XXUFNI3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> SingleDownload.
<ID:0/022> sboot.bin
<ID:0/022> NAND Write Start!!
<ID:0/022> tz.img
<ID:0/022> boot.img
<ID:0/022> recovery.img
<ID:0/022> system.img
<ID:0/022> cache.img
<ID:0/022> hidden.img
<ID:0/022> modem.bin
<ID:0/022> RQT_CLOSE !!
<ID:0/022> RES OK !!
<ID:0/022> Removed!!
<ID:0/022> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Now enter recovery mode and make wipe cache, Dalvik and data again and reboot.
viktorak said:
Now enter recovery mode and make wipe cache, Dalvik and data again and reboot.
Click to expand...
Click to collapse
Already did that but no change
Now you have a Rom flashed .The problem is that can't boot. In this momment I'm not at home.I can be online later.
---------- Post added at 04:29 PM ---------- Previous post was at 04:24 PM ----------
After sucsessful flashed Rom you must be directly enter to Recovery to make all wipes and finaly reboot...
Well,jon192694,let`s trying this.Repeat this step: wipes Dalvic, cache and Factory reset,then flashing a Stock 4.4.4,in Odin uncheck Auto reboot,and when the installation is sucsessfuly terminated:<OSM> All threads completed. (succeed 1 / failed 0),remove the battery/30sec/,enter in recovery and wipe Dalvic cache,cache and data,reboot.
viktorak said:
Well,jon192694,let`s trying this.Repeat this step: wipes Dalvic, cache and Factory reset,then flashing a Stock 4.4.4,in Odin uncheck Auto reboot,and when the installation is sucsessfuly terminated:<OSM> All threads completed. (succeed 1 / failed 0),remove the battery/30sec/,enter in recovery and wipe Dalvic cache,cache and data,reboot.
Click to expand...
Click to collapse
I will try that now - the only problem is that I can't wipe dalvic after flashing because the stock recovery tool isn't offering this option.
viktorak said:
Well,jon192694,let`s trying this.Repeat this step: wipes Dalvic, cache and Factory reset,then flashing a Stock 4.4.4,in Odin uncheck Auto reboot,and when the installation is sucsessfuly terminated:<OSM> All threads completed. (succeed 1 / failed 0),remove the battery/30sec/,enter in recovery and wipe Dalvic cache,cache and data,reboot.
Click to expand...
Click to collapse
There is no change still stuck on boot animation. I did it as you sugested the only thing I didn't do was wiping dalvic. I later installed cusrom recovery to repeat it including wiping dalvic but no change
I did some more testing, omni 4.4.4 is not working neither the most recent cm 11 nightly. What is working is cm 10.1.
So I have the impression my phone will only work with Android 2.1.2 systems?
Would usage of Mobile Odin make any difference?
jon192694 said:
I did some more testing, omni 4.4.4 is not working neither the most recent cm 11 nightly. What is working is cm 10.1.
So I have the impression my phone will only work with Android 2.1.2 systems?
Would usage of Mobile Odin make any difference?
Click to expand...
Click to collapse
Hi,jon192694.Yes, you have to try things, as long as they are properly made.Try to flash 4.4.4 using Odin mobile.Here you have the thread on XDA- http://forum.xda-developers.com/showthread.php?t=1347899.
Has nobody experienced anything similar? I tink I now almost tried everything possible. Would be strange if I am the only one with this effect.
I am thinking about staying at the modified 4.1.2 or send it in to repair service...
Hey, so i tried rooting my galaxy tab s2 810, i tried flashing a custom kernel, and then used an autoroot. it didn't seem like it was working, and now im afraid that i have gotten myself in more trouble that i thought was possible.. when i try to boot my device it stays on the boot screen saying either '' Kernel is not seandroid enforcing'' or ''recovery is not seandroid enforcing''. i cannot enter the recovery menu by pressing Power+home+vol up.
however i can enter the download section...
i have tried a bunc of different fixes, and i dont know if all i did was make my problem worse... i could really use some help.
Try flashing the newest stock ROM over ODIN 5.1.1_XAC-T810XXU2BOJ1-20151102191344.zip
And start over from the beginning, take the right files ( android 5.1.1)
I've tried but it wont flash it for some reason it keeps failing
At which step exactly? What ist the output in ODIN?
Gesendet von meinem Nexus 5X mit Tapatalk
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> boot.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
No need to create 3 threads on the same subject.
http://forum.xda-developers.com/showpost.php?p=64748665&postcount=98
Which android version was your tablet running and what region is it from?
I think u are trying to downgrade your bootloader. Do you really have the latest Stock rom ? Take the one i posted above.
Gesendet von meinem Nexus 5X mit Tapatalk
ashyx said:
No need to create 3 threads on the same subject.
http://forum.xda-developers.com/showpost.php?p=64748665&postcount=98
Which android version was your tablet running and what region is it from?
Click to expand...
Click to collapse
woops, got kind of desperate there.. its 5.1.1 and i bought it in the US
ashyx said:
No need to create 3 threads on the same subject.
http://forum.xda-developers.com/showpost.php?p=64748665&postcount=98
Which android version was your tablet running and what region is it from?
Click to expand...
Click to collapse
I have also flashed the twrp with succes. i could get into the custom recovery, so i tried to wipe it from there and nothing happened.... when i try to boot my device from twrc is says ''no os installed''
no stock ROM that i have tried has been able to flash
jever55 said:
I have also flashed the twrp with succes. i could get into the custom recovery, so i tried to wipe it from there and nothing happened.... when i try to boot my device from twrc is says ''no os installed''
no stock ROM that i have tried has been able to flash
Click to expand...
Click to collapse
OK so your half way there.
Did you try flashing the rom westernmg posted? That is the one you should be flashing.
Also quit with the random wiping before you go making things worse. Wipe is rarely needed except for the data partition.
If that doesn't work there is a custom rom by BigBot96 for the t810 in the development section. Flash that with twrp and you should be up and running again.
ashyx said:
OK so your half way there.
Did you try flashing the rom westernmg posted? That is the one you should be flashing.
If that doesn't work there is a custom rom for the t810 in the development section. Flash that with twrp and you should be up and running again.
Click to expand...
Click to collapse
i have tried the ROM he posted but with no succes... im not quite sure how to flash anything with twrp
jever55 said:
i have tried the ROM he posted but with no succes... im not quite sure how to flash anything with twrp
Click to expand...
Click to collapse
Read the post or Google.
ashyx said:
Read the post or Google.
Click to expand...
Click to collapse
thank you, but he wants me to flash a firmware package over ODIN, in order too do the flash via Twrp right ? i have attempted that flash and failed...
Maybe you have killed your OS while wiping it in TWRP and not flashing a new system.
Thats why i told you to flash a fresh stock ROM with ODIN.
You can also try flashing CM12.1 over TWRP...
jever55 said:
thank you, but he wants me to flash a firmware package over ODIN, in order too do the flash via Twrp right ? i have attempted that flash and failed...
Click to expand...
Click to collapse
What do you mean you've flashed with TWRP, what did you flash?