LENOVO A2010-A (5.1 Lollipop)
Processor - ARMv7 Processor rev 4 (v7I)
Cores - 4
Max Frequency - 988 Mhz
Instruction Sets - armeabi-v7a, armeabi
SIMD Instruct. - NEON
so my question is; Which ARM should i download for my device?
(please be specific, like post the exact ARM name like this " xposed-v72-sdk22-x86.zip " thank you)
Edit: here's a photo https://postimg.org/image/4hd94v7o7/
Kramiix said:
LENOVO A2010-A (5.1 Lollipop)
Processor - ARMv7 Processor rev 4 (v7I)
Cores - 4
Max Frequency - 988 Mhz
Instruction Sets - armeabi-v7a, armeabi
SIMD Instruct. - NEON
so my question is; Which ARM should i download for my device?
(please be specific, like post the exact ARM name like this " xposed-v72-sdk22-x86.zip " thank you)
Click to expand...
Click to collapse
armeabi-v7a = ARM.
Not ARM64, not x86, just ARM.
Portgas D. Ace said:
armeabi-v7a = ARM.
Not ARM64, not x86, just ARM.
Click to expand...
Click to collapse
hi so i was looking for it and unfortunately i cant seem to find the arm-7a. Could you please by any chance post the exact xposed name of it? Thanks. (i clicked thanks also)
for example; xposed-v72-sdk22-arm.zip (just copy paste it)
Kramiix said:
hi so i was looking for it and unfortunately i cant seem to find the arm-7a. Could you please by any chance post the exact xposed name of it? Thanks. (i clicked thanks also)
for example; xposed-v72-sdk22-arm.zip (just copy paste it)
Click to expand...
Click to collapse
I don't know which part you haven't understood. There are three types of Xposed frameworks:
- arm (xposed-v72-sdk22-arm.zip)
- arm64 (xposed-v72-sdk22-arm64.zip)
- x86 (xposed-v72-sdk22-x86.zip)
armeabi-v7a is the same as arm, so you have to use the one with "arm" in its name -> xposed-v86-sdk22-arm.zip
My recommendation to you: if you can't figure out simple stuff like this, then you shouldn't flash Xposed at all without further reading and learning, or you will end up bricking your device.
Portgas D. Ace said:
I don't know which part you haven't understood. There are three types of Xposed frameworks:
- arm (xposed-v72-sdk22-arm.zip)
- arm64 (xposed-v72-sdk22-arm64.zip)
- x86 (xposed-v72-sdk22-x86.zip)
armeabi-v7a is the same as arm, so you have to use the one with "arm" in its name -> xposed-v86-sdk22-arm.zip
My recommendation to you: if you can't figure out simple stuff like this, then you shouldn't flash Xposed at all without further reading and learning, or you will end up bricking your device.
Click to expand...
Click to collapse
i still would like to say thank you.. every works out fine.. :good:
How to install Xposed for Lenovo A2010
give me fichers xposed zip for lenovo a2010 and thnx you
Exposed frame work v87 or other arm only are not working
Kramiix said:
i still would like to say thank you.. every works out fine.. :good:
Click to expand...
Click to collapse
Guys....pls help.me to install corrected framework in my lenovo a2010 by providing appropriate file and fixes...for not working also
Here is the download link for Xpose version 87 and xpose installer 3.1.1.
(SDK 22 and arm is comfortable for our device)
The flashable Zip File:
http://dl-xda.xposed.info/framework/sdk22/arm/xposed-v87-sdk22-arm.zip
And The Apk File:
http://forum.xda-developers.com/attachment.php?attachmentid=3921508d=1477916609
For more information visit my blog:
https://puspenrath.wordpress.com/2017/04/16/how-to-install-xpose-framework-in-your-phone/
Good
Related
Hi, I'm using a Chuwi HiBook, I rooted and unlocked and I flashed xposed-v84-sdk22-x86.zip but now it's not booting, i had to reflash android.
The kernel version says "3.14.37-x86_64-L1-R517
What should i do? I mean, does that zip work for my device? Maybe the 32bit version doesnt work on this yet and I'm making a dumb move
Thanks
EDIT: More info here: http://forum.xda-developers.com/xposed/modules/chuwi-tweaks-t3316556/page2
The system is ARM but there is no tablet with this chip with xposed working on it.
Any clues?
Hi, i think flashing xposed disabler can help you. Just try it.
Yakandu said:
Hi, I'm using a Chuwi HiBook, I rooted and unlocked and I flashed xposed-v84-sdk22-x86.zip but now it's not booting, i had to reflash android.
The kernel version says "3.14.37-x86_64-L1-R517
What should i do? I mean, does that zip work for my device? Maybe the 32bit version doesnt work on this yet and I'm making a dumb move
Thanks
Click to expand...
Click to collapse
try the xposed disabler zip, if it don't work just re-flash the stock rom
Yep i had to flash again, the system is ARM but there is no support for Intel Cherry Trail Z8300 from xposed, there is no device with this cpu with xposed working on it
Yakandu said:
Yep i had to flash again, the system is ARM but there is no support for Intel Cherry Trail Z8300 from xposed, there is no device with this cpu with xposed working on it
Click to expand...
Click to collapse
Agreed, Right now I am searching for MiPad2 xposed.zip without luck.... My cpu is also Intel cherry trail x5-z8500 14nm , The CPU is x86_64 armV8a architecture.
My devices runs as Dual-OS, switching between full windows 10 and full android lollipop within their respective home-screen widgets. That's nice...
I have root and a kind of official aosp, although the official firmware is MIUI.
If someone someday will come across xposed.zip x86_64 then post here a link, please!
Thank you!
datorprofessor said:
Agreed, Right now I am searching for MiPad2 xposed.zip without luck.... My cpu is also Intel cherry trail x5-z8500 14nm , The CPU is x86_64 armV8a architecture.
My devices runs as Dual-OS, switching between full windows 10 and full android lollipop within their respective home-screen widgets. That's nice...
I have root and a kind of official aosp, although the official firmware is MIUI.
If someone someday will come across xposed.zip x86_64 then post here a link, please!
Thank you!
Click to expand...
Click to collapse
is this what you're looking for?
http://en.miui.com/thread-78894-1-1.html
daWyrd1 said:
is this what you're looking for?
http://en.miui.com/thread-78894-1-1.html
Click to expand...
Click to collapse
I got bootloop (and not a single uninstaller working with that too, tried those zip special for MIUI Mipad2 . The other xposed zips are for arm64 and other kinds of arm but not this model one .
I've spoke with the "deliver" too of the flash zips, "Papka__" and SolarWarez and he got them from another place, but none of theme work with MiPAd2. Overall the device is very fast and doing well. Having windows 10 besides as a multiOS.
Also, I've read somewhere that Rovo89 will never get involved in those CPU x86_64, mainly because the vendors have heavily modded ROMs. :crying: I gave up , never ever give up , and now I'm forced to use other kinds of firewalls.... The Xprivacy module was very nice, because I could see in very detail what was going on on each app and a lot of other modding modules.
:good: Thanks anyway for your trying.
Intel the creator of those SoC has dropped the manufacturing in phones and tablets... So there aren't enough big public and demand, which doesn't encourage developers spend time on the hack!
Intel is investing on IoT (internet of everything) and CPU's for drones, The Future Conquer army weapons. Also Intel investing in more power consuming Goldmont CPUs with 6-12watts that are very powerful for bigger mobile devices.
Solved. Except no feedback for MIUI. Cheers
https://forum.xda-developers.com/xposed/xposed-intel-atom-x5-z8300-x8664-solved-t3585087
So I am looking to flash the Xposed SDK.
I can tell that my ROM is based off of 5.1.1, so I will need SDK22.
However, there is 3 versions of the SDK22, amd, amd64, x86.
I not sure if I should use the amd or amd64 SDK.
My model is D5803 if it matters.
It is not AMD but ARM.
Use the simple arm version with sdk22 for Lollipop.
Ah thanks, I was rly tired when I wrote that so I confused AMD and ARM lol
Metaception said:
Ah thanks, I was rly tired when I wrote that so I confused AMD and ARM lol
Click to expand...
Click to collapse
Amd - Arm, close enough, right!
From what i am aware all Xperia's are ARM currently
SDK-22 = Lollipop
SDK-23 = Marshmallow
^ For future reference
edit:
Ok, now i am quite confident this xposed works on most Dual Boot Cherry Trail (edit:and Bay Trail!)Tablets running stock-ish Android 5.1 Lollipop (even RemixOS!) but its doubtfull to run on heavily customized roms as MIUI or else(?). This said, alecuba16 reported not working for Cube iwork 10 (needs confirmation). Also i found gabsporto post who basically made the same experience and conclusions as me -.-'
So far i installed several modules (check out screenshot) and it runs perfect!
Please dont try this if you dont know how to make a nandroid backup or dont know what ADB means.
HOWTO:
Prereq: ROOT, TWRP, stock-like Android 5.1 @cherrytrail z8300 x86_64bit
Installation:
0. Backup
1. Install official Xposed installer (current 3.1.1) Dont start it yet!
2. Flash amiduos-xposed zip via TWRP; Reboot
3. Start xposed and DL any modules you like
4. Don't use the update function (->v87) in xposed! Keep v81 for now.
Download:
Official Xposed Installer for Lollipop:
https://forum.xda-developers.com/showthread.php?t=3034811
amiduos-xposed.zip
http://amiduos.com/support/knowledge-base/article/xposed-framework-support-in-amiduos
or from wheelman's post:
https://forum.xda-developers.com/x98-air/general/xposed-teclast-x98-plus-ii-t3571839#post71743254
Wheelman & me installed installer-apk first, on AMiduos Website instructions (AmericaMegatrend-intel-dual-OS?) its the otherway around - i think it doesnt matter. Still it might be IMPORTANT you dont start the app before flashing the zip..!
Working:
Teclast x98 Plus II
Teclast X98 Plus
Teclast x16 Plus
Teclast Tbook 11
Onda V919 Air +RemixOS
Onda V80
Ares Nextbook (Intel Atom Z3735G !!)
reported not working
Cube iWork 10 - need confirmation!
Please report working devices!
Original Thread from wheelman and gabsporto , dont forget to hit THX!
https://forum.xda-developers.com/x98-air/general/xposed-teclast-x98-plus-ii-t3571839#post71743254
https://forum.xda-developers.com/xposed/lollipop-xposed-framework-intel-cherry-t3565149
Also worth reading #1 #6 by krustymars
https://forum.xda-developers.com/an...p-twrp-2-8-7-0-root-teclast-x16-plus-t3561486
I hope its okay i re-post this in the general xposed area since this might interest some people and Rovo89 stated on Github : "So in short, I don't think I'll ever support this." - but he might wanna give this another shot
https://forum.xda-developers.com/x98-air/general/xposed-teclast-x98-plus-ii-t3571839#post71743254
QUOTE from wheelman1995
Xposed installation:
1. Install XposedInstaller_3.1.1.apk
2. flash amiduos-xposed.zip using TWRP. No wipes needed.
You must not update xposed framework in the app. You will get bootloop.
Tested on Teclast x98 plus II C2D4, firmware V1.05_20160617.
Attached Files
File Type: zip amiduos-xposed.zip - [Click for QR Code] (4.02 MB, 22 views)
File Type: apk XposedInstaller_3.1.1.apk - [Click for QR Code] (2.84 MB, 24 views)
Click to expand...
Click to collapse
SELF_QUOTE:
Nice, I can confirm xposed works on my TECLAST TBOOK 11 v1.07! Thanks dude!
I googled (or better raped google and 4pda i think) to find this clue about AMIDUOS some time ago but had not the guts to try before at least someone tested on an intel z8300 device i wonder why there arent more requests since most chinese dual boot tablets have this cpu.
So probably it works on ~ALL CHINESE INTEL ATOM X5 Z8300 x86_64 devices!!!!
(make a backup and test yourself! I only have tbook...)
Tags: XPOSED FOR INTEL ATOM X5 Z8300 x86_64 WORKING SOLVED ONDA CUBE CHUWI TECLAST ETC:^-^
edit: I installed busybox first - not sure if needed but i might had read something about this?
Click to expand...
Click to collapse
Screens
alecuba16
Doesn't work for cube Iwork 10 with android 5.1 x86_64, it shows not compatible with x64...
Click to expand...
Click to collapse
"not combatible with x64" got me thinking...if you could see SS,mine shows as ARM!
In aida64 it show the SoC/CPU is capable of different instruction sets: x86_64, Armeabi 7 and ARM. I had a look on the code of" flash-script.sh" and this looks interesting but im no dev! Just a wild guess...
ARCH=arm
IS64BIT=
if [ "$ABI" = "x86" ]; then ARCH=x86; fi;
if [ "$ABI2" = "x86" ]; then ARCH=x86; fi;
if [ "$API" -ge "21" ]; then
if [ "$ABILONG" = "arm64-v8a" ]; then ARCH=arm64; IS64BIT=1; fi;
if [ "$ABILONG" = "x86_64" ]; then ARCH=x64; IS64BIT=1; fi;
fi
much better research by krustymars. Shouldn't it be easy now to port to official?
https://forum.xda-developers.com/showpost.php?p=71636611&postcount=6
It seems to work on my X98 Plus A6C7 running Remix OS.
Thanks for your great work !
It works fine on my ONDA V919 Air CH !
Works on a nextbook ares 8
Thanks for the feedback!:good:
Miroku77 said:
Thanks for the feedback!:good:
Click to expand...
Click to collapse
I also have an older Nextbook Ares 8, that originally came with Android 5.0. It has been upgraded to 5.1.1 with a rom ported from the newer model of the tablet. This version of xposed is working fine on it also. there are no problems with the modules I have tried so far: gravity box, greenify, amplify and xposed media scanner optimizer.
Question: If I decide to remove it, will the standard, flashable, xposed uninstaller, work to remove it? It appears to me that it should, based on what I saw when I read the .sh script built in. Has anyone tried it to confirm that it works?
Thanks
Works on Teclast X80 Pro (E3E9)
Thus far this seems to work as intended on a Teclast X80 Pro (E3E9).
martyfender said:
I also have an older Nextbook Ares 8, that originally came with Android 5.0. It has been upgraded to 5.1.1 with a rom ported from the newer model of the tablet. This version of xposed is working fine on it also. there are no problems with the modules I have tried so far: gravity box, greenify, amplify and xposed media scanner optimizer.
Question: If I decide to remove it, will the standard, flashable, xposed uninstaller, work to remove it? It appears to me that it should, based on what I saw when I read the .sh script built in. Has anyone tried it to confirm that it works?
Thanks
Click to expand...
Click to collapse
Update: I can confirm that flashing the xposed uninstaller in twrp removes xposed.
I had it installed with the following modules:
gravity box
amplify
appopsxposed
power nap
greenify xposed
xposed mediascanner
I found that idle cpu useage was 9-10% with these modules and only 1-2% without xposed and the previous modules. I suspect if I had just used gravity box and the already installed greenify it might have been ok. I suspect the following modules added quite a bit of overhead, contrary to their supposed benfits:
amplify
appopsxposed
power nap
Anybody care to weigh in on their experiences with xposed and various modules?
Thanks
Xiaomi MiPad 2 - Wrong platform
Works on ONDA V891w CH
Chuwi Hi12 Dualboot
Hi, I can confirm it's working great on my Chuwi Hi12 Dualboot (Intel Atom z8350) :good::laugh:
not working on acer predator 8, says wrong platform
Chuwi hi12
Works perfectly on hi12 - installer hangs sometimes. Gravitybox, Android Nify and Lockscreen widgets all work. Appopsxposed just hangs.
CUBE iWork10 DOES WORK!!! THANKS!
I can confirm that this does work for the Cube iWork10 Ultimate. I do have a newer i15-TG model with z8350 processor, but I don't see why it shouldn't work with any of the other models. The reason I think one person said it doesn't work is when flashing the amiduos-xposed.zip in TWRP, I did get an error, but it was to do with not having access to system mount or something (I can't remember the exact words). To solve this, go to the 'mount' option in TWRP, and check the 'system' checkbox. Then I was able to flash the zip fine. On reboot it did take quite a while to load and the 'optimizing apps' (no more than 5 minutes), but it works. Thanks heaps for this.
I can also confirm it's working on cube iWork 10 Ultimate.
Inviato dal mio LG-V400 utilizzando Tapatalk
Thank you! Working on Chuwi Hi8 Pro
Works fine on my iwork10 i15-TD! Thanks a lot:good:
Thank you! Working on Chuwi Hi8 Pro 6040
Hello
I need help to install xpose framework on Samsung galaxy S4 TouchWiz android ver.5.0.1 (lollipop)
Processor : ARMv7 Processor rev 0 (v71)
Instruction set : armeabi-v7a, armeabi
Core : 4
SIMD Instructions : NEON
Max Frequency : 1890 Mhz
I already download and install :
Xposed-v87-sdk21-arm.zip
Xposed-v84-sdk21-arm.zip
Xposed-v75-sdk21-arm.zip
Xposed-v75-sdk21-arm-areter97-snapdragon.zip
Wanam Xposed Instaler 1.3.0.zip
Ma.wanam.xposedlollipop_v130_319e40.apk
Xposed Instaler _3.0_alpha4.apk
Xposed Instaler_3.1.1.apk
Buat its seem all of this after installation finish and I open xposed I always found RED NOTICE : THE XPOSED FRAMEWORK IS NOT INSTALLE.PLEASE DOWNLOAD ZIP FILE FROM XDA AND FLASH IT MANUALY VIA RECOVERY.
I do install that zip file with TWRW recovery on recovery mode, so please help me find the right file to install on my S4, thanks
If you don't receive an answer ...
Disregard if this is irrelevant to your inquiry [I only skimmed your write-up] but this allowed for successful root+xposed installation on my Verizon SCH-I545 S4 (5.0.1 / LRX22C / OF1). All of my previous attempts failed in a similar fashion to yours so give it a try if you don't find the answer you are looking for.
I'm unable to post outside links (new user with < 10 posts), but type "/r/galaxys4/comments/6ghd4z/guide_root_install_xposed_on_vzw_galaxy_s4/" after the reddit homepage url to visit the page.
Hólà XDA
HEY devs?, need some help, wanna to know, How can I port arm64 apps to armv7a, do i need to change some manifest values, edit libraries, edit activities, decompile and recompile using armv7a compiler or anything else??????
I'd seen a post over xda, where one ported arm64 google live wallpaper for armv7a, is it possible?????
And last question, if Oreo is Compiled only for Arm64 than, how some make it working on armv7a devices????
Thanks in Advance?
Satyam_Mishra said:
Hólà XDA
HEY devs, need some help, wanna to know, How can I port arm64 apps to armv7a, do i need to change some manifest values, edit libraries, edit activities, decompile and recompile using armv7a compiler or anything else??????
I'd seen a post over xda, where one ported arm64 google live wallpaper for armv7a, is it possible?????
And last question, if Oreo is Compiled only for Arm64 than, how some make it working on armv7a devices????
Thanks in Advance
Click to expand...
Click to collapse
There are lots of threads available related to learning (porting & developing of apps and roms both),
Just go to general xda forums or this link, https://forum.xda-developers.com/app-development
For last question, ARM32 or ARM64 depends on CPU architecture, our (G5s plus) CPU is ARM64.
You just need to flash ROM as usual (backup, wipe & flash),
Your system will be considered Arm or Arm64 according to which ROM you flash...
REPORTED TO MOVE THREAD IN Q/A, JUST CHECK WHERE YOU ARE POSTING..