The device moto g 2nd gen not booting. Its only showing the company's logo. After which blank screen appears. I have tried factory reset by going into recovery mode but it shows "No Command" with an android dead symbol. So I could'nt reset the device. The device is unrooted and its bootloader is locked. Please help
Thnx in advance..!
pravardhan96 said:
The device moto g 2nd gen not booting. Its only showing the company's logo. After which blank screen appears. I have tried factory reset by going into recovery mode but it shows "No Command" with an android dead symbol. So I could'nt reset the device. The device is unrooted and its bootloader is locked. Please help
Thnx in advance..!
Click to expand...
Click to collapse
To enter in the menu of recovery when you see the green droid:
you must take both vol + with power button pressed for 6/7 secs and then released them. After that you will be able to enter in recovery menu.
By the way, have you unlocked bootloader? Which model do you have?
I have the "no command" screen with the android man , however it flashes in and out. when i hold down the power button and go into ap fastboot mode, i cannot go into recovery (it just shutdown the phone) and factory reset does not work. My phone is a non dev version, is there anything i can do?
Moto X 1095 with 24.11.18 6.0 update doesn't boot into recovery. Everytime I try to fastboot flash a recovery, it prompts a mismatched partition.
If I try to reboot into recovery, it will give me a blank, black screen.
Any advice would be appreciated.. I am not sure what to do. No one has a solution to this. I've tried to look for a factory recovery.img but no where to be found.
Can I downgrade to 5.1 using the Motorola Factory Image ? If so, how?
I have a similar problem
Does the black screen have the Android robot with an exclamation mark in it? If so, that's the stock Recovery. Press Power + Vol Up, and you should be able to access it.
When flashing a custom Recovery, make sure that after issuing "fastboot reboot" you don't let the phone boot into system, otherwise you'll end up with the stock Recovery again. After the reboot, you should access the bootloader again and enter Recovery for the custom Recovery to take place.
Hello all,
I'm having some issues with my Moto X 1st Gen (XT1053). At first, the issue was random rebooting, but at one point the phone was stuck and so I restarted it. When the phone rebooted, it was stuck on the Motorola logo screen. I have tried pressing the POWER + VOLUME DOWN keys to attempt to get into "Recovery" in order to "wipe cache partition", but when I select "Recovery" using the VOLUME UP button, the phone goes right back into the logo screen, and then either stays on that screen or immediately powers off.
At this point I can't think of anything else that could fix this issue. Could it be a hardware (motherboard) issue?
I would appreciate any help!
Thanks.
Do you have a custom recovery? If so, have you tried booting into a recovery using fastboot (Not the one on the device)?
I don't know what happened, today I woke up, pick my phone, anwser a few messages and them suddenly my phone reboot and all goes blank. So I connected it to the power, the cellphone started to blink the blank led light e shows the power symbol over and over, them after a time shows this message: "Start Up Failed" Your device didn't start successfully. Use the Software Repair Assistant on computer to repair your device."
I did what was told, but after all the recover procedure complete the same messages and bliking behaviors starts again. My phone is not rooted. Is there a solution that I can try to solve this issue?
Thanks in Advance.
Motorola G5S Plus reboot
Try this. Start the bootloader (Boats Vol -, + power at the same time), browse with Vol + or Vol-, search for "recovery mode", with power you accept. If "no command" appears on the screen, press power + Vol +. There you have many options. You can do Factory reset.
lokochris said:
Try this. Start the bootloader (Boats Vol -, + power at the same time), browse with Vol + or Vol-, search for "recovery mode", with power you accept. If "no command" appears on the screen, press power + Vol +. There you have many options. You can do Factory reset.
Click to expand...
Click to collapse
Hi lokochris, thanks for answering
When I select the recovery mode, this message appears in the phone: "failed to validate recovery mode. ERROR: Failed to pass validation, backup to fastboot."
The factory reset only reboot again, and again blank light blinking and power logo in a loop.
Motorola G5S Plus reboot
use this method https://www.youtube.com/watch?v=fMWbC_c6758
This youtube method was the first thing I tried. It shows the Motorola logo and returns to the same message. I believe something is blocked, because the Power logo remains in Loop and the white light is flashing.
These results are displayed only when the phone is charging. Without charging or cable on the PC, my phone doesn't even start.
Motorola G5S Plus reboot
Try this. If the problem continues, it may be a hardware problem. I have read over there, if you try to remove google account or unlock bootloader, the phone enters hard brick and it is almost unbrick.
https://forum.xda-developers.com/moto-g5s-plus/how-to/batch-scripts-sanders-unbrick-flash-t3895165#post82964107
lokochris said:
Try this. If the problem continues, it may be a hardware problem. I have read over there, if you try to remove google account or unlock bootloader, the phone enters hard brick and it is almost unbrick.
https://forum.xda-developers.com/moto-g5s-plus/how-to/batch-scripts-sanders-unbrick-flash-t3895165#post82964107
Click to expand...
Click to collapse
Hi lokochris,
What I need to do to run this batch scripts? because the link only talks about the scripts, but not what you need to do to run them.
Moto g5s plus reboot
Just run the one you need ( bootload), connect the phone to the PC and run automatically