Hello, ALL CUSTOM ROMS frome the HTC Mini One 2 working not whit WiFi 5ghz . Why? Can help me ?
Sorry for my bad englisch!
Because HTC isn't providing his prima driver on the shared kernel source. The opensource prima driver does not work properly with our device. BUT nightcore500 has done great work. His driver is now working according to its last information: http://forum.xda-developers.com/showpost.php?p=69634822&postcount=333
When v0.8 is released, we finally have 5GHz
Related
Dear Developers
My devise Samsung GT-P1000 ( Tab - p1 ) and i m using ( CyanogenMod 9 Nightly builds ) the problem is that the devise is not discovering or detecting WIFI connections after installing any Builds after 17-6-2012 and i need to return to build dated 17-6-2012 or earlier in order to establish a WIFI connection .
Please advise for a solution .
Thanks.
I think this issue should be reported to CM Team - if earlier versions work well, and newer has problems, it's more likely that's a ROM problem rather than your device.
Why not to report it?
I'm on 19/6 version and have no wifi problems.
Dear all
thank you for your interest i have checked other forums and found the same complain by others but not as a general problem without any solution till today .
can you provide where to report this problem or anybody can assist in solving it .
Thanks.
This Sense 4.0 Rom has a new kernel with WiFi hotspot fully working ... Hope we can get it soon
http://bbs.hiapk.com/forum.php?mod=viewthread&tid=4364320
This is not a place holder however there is no actual mod yet for us to test yet this is a work in progress and I Encourage anyone and everyone to help out...
THE CONCEPT:
I asked Gokhan Moral if it was possible to back port the newer Mali drivers CM 10.1 to be used in official Samsung firmware...
Now for this to work we need matching Android library files compiled for the kernel drivers...
His intriguing reply was that the recently released Galaxy Note 8 uses newer Mali drivers (turns out not the same ones as CM10.1 but newer that official S3 firmware) and assuming the Note 8 is running Android 4.1.2 then there is a good chance the lib files WILL be compatible with current S3 firmware...
It turns out the note 8 firmware IS 4.1.2 based and the kernel sources contain the necessary drivers so...
Let's give this a crack eh?
GOALS:
#1 compile Mali drivers from Note 8 sources into existing Siyah sources thus creating a working kernel.
#2 obtain and identify necessary matching lib files from Note 8 firmware.
#3 transplant these libs into an S3 custom ROM and see if they work
#4 create and release a CWM zip which will flash both the custom kernel and lib files which can be used to mod any existing 4.1.2 Samsung firmware.
#5 crack a beer any bask in the satisfaction of a job well done...
PROGRESS:
#1 Budding developer and valued contributor to this forum psndna88 is already merging the necessary code with the latest Siyah sources. A test kernel should be conceived soon...
If anyone else wants to give this a go with other sources please do
#2 A request was made on the Note 8 forum and I have the necessary lib files ready to be back ported once the test kernel is ready...
If anyone has anything useful to contribute please PM me and follow this thread so once something is ready to be tested you can wet your appetite.
Sent from my GT-I9300 using Tapatalk 2
Reserved...
Good luck,good work
But what's diffrent with note 8 and galaxy s3 firmwares?
LegendM said:
Good luck,good work
But what's diffrent with note 8 and galaxy s3 firmwares?
Click to expand...
Click to collapse
Well probably not a great deal in general however for this project we are interested in using the newer GPU drivers which are in the note8 firmware and apparently also the leaked 4.2.1 S3 firmware also.
The kernel side of things need to match the ROM lib files which are complied by Samsung using their closed xynyos sources.
Since the note 8 firmware uses the same android version as ours then HOPEFULLY we can use the kernel sources and transplant the lib files from the note 8 ROM and get it all working smoothly...
The question assuming this project succeeds is: Are the new Mali drivers noticeably better?
Sent from my GT-I9300 using Tapatalk 2
They give a documented 15-20% performance boost in the Epic Citadel benchmark.
siyah kernel compiled with n8000 mali driver,
but currently following things may be broken:
-mali touch boost
-step5 of gpu freq
-gpu uv
Can codeworkx port those drivers to cm? (I mean source available, binaries)
GR0S said:
Can codeworkx port those drivers to cm? (I mean source available, binaries)
Click to expand...
Click to collapse
the ones we are trying to port are older than current CM 4.2.2 mali drivers, but newer than current stock sammy 4.1.2 drivers
attached is a diff file for changes in stock mali kernel drivers and siyah kernel mali driver for stock rom
and diff for lib files between N8000 and I9300 stock roms
i havent fully applied all changes in mali driver taken from N8000 inserted in siyah kernel source before compiling
Good idea guys.. I have a note 10.1 the n8013 model if it helps
Sent from my GT-I9300 using xda premium
Hello,
Yank555 did something similar with his kernel ( he used the newer Kernel Sources from a Galaxy Tab and built a Galaxy S3 Kernel ), maybe you could send him a PM and ask for help ?
Best regards,
George
P.S: I could help you with the flashable packages and also do some testing if necessary.
OK it looks like the N8000 uses a very similar version of the Mali drivers so there might not be much to gain from this project
Sent from my GT-I9300 using Tapatalk 2
Hello Guys.
As You May Know That Recently Broadcom Has Recently Released VideoCore Drivers Here Is The Link : http://blog.broadcom.com/chip-desig...ves-developers-keys-to-the-videocore-kingdom/
As You May Have Noticed It Also Says Some Thing About Broadcom BCM21654.This Is Actually A Chip Which Is Used The Galaxy Pocket Plus. Not So Long Ago Sir blearreaz0n Helped Us And We Got ROOT And CWM Working On The Device. He Also Said That He Was Working On A CM10.1 Rom. But Its Been Like A Year Now And We Have Got Progress On The Project. Actually Its Not That Easy To Build CM Rom And I Was Wondering That We Should Help And Try To Build CM10 Rom Together I Mean All The Owners Of This Device That Is. Sir blearreaz0n Has Also Build A CM10.1 Rom Which Can Be Downloaded From His Post. I Was Trying To Build A CM10 Rom But Encountered Many Problems (Maybe Its Because Of My PC Its Not That Good). So Can Anybody Help Me Build This Rom. I Am Trying To Fix Some Bugs On The CM10.1 Rom By Sir blearreaz0n.
ROOT , CWM And CM10.1 Rom Can Be Found Here : http://forum.xda-developers.com/showthread.php?t=2291865
Note : The CM10.1 Rom Is In Alpha Stage
And Thanks To blearreaz0n For ROOT CWM And CM10.1 Rom
And Sorry My Keyboard Is Not Working Properly...
I Have Started To Work On It http://forum.xda-developers.com/android/development/rom-port-cyanogenmod-10-samsung-galaxy-t2841647 If Any One Can Help Me It Will Be Appreciated
Discussion Can Be Done In This Thread
LPCRJ™ said:
Hello Guys.
As You May Know That Recently Broadcom Has Recently Released VideoCore Drivers Here Is The Link : http://blog.broadcom.com/chip-desig...ves-developers-keys-to-the-videocore-kingdom/
As You May Have Noticed It Also Says Some Thing About Broadcom BCM21654.This Is Actually A Chip Which Is Used The Galaxy Pocket Plus. Not So Long Ago Sir blearreaz0n Helped Us And We Got ROOT And CWM Working On The Device. He Also Said That He Was Working On A CM10.1 Rom. But Its Been Like A Year Now And We Have Got Progress On The Project. Actually Its Not That Easy To Build CM Rom And I Was Wondering That We Should Help And Try To Build CM10 Rom Together I Mean All The Owners Of This Device That Is. Sir blearreaz0n Has Also Build A CM10.1 Rom Which Can Be Downloaded From His Post. I Was Trying To Build A CM10 Rom But Encountered Many Problems (Maybe Its Because Of My PC Its Not That Good). So Can Anybody Help Me Build This Rom. I Am Trying To Fix Some Bugs On The CM10.1 Rom By Sir blearreaz0n.
ROOT , CWM And CM10.1 Rom Can Be Found Here : http://forum.xda-developers.com/showthread.php?t=2291865
Note : The CM10.1 Rom Is In Alpha Stage
And Thanks To blearreaz0n For ROOT CWM And CM10.1 Rom
And Sorry My Keyboard Is Not Working Properly...
Click to expand...
Click to collapse
Hello, I was thinking about something, maybe it shouldn't help only the owners of Galaxy Pocket Plus but maybe all the owners of every BCM21654 devices, the help would be greater and more devices without CM support would get CM builds. I'm not a developer but would like to help and work together to get CM working on BCM21654 devices. Mine is Galaxy Music. Just an idea :silly:
yes that can be possible actually but we firstly need a power full pc i mean i i3 only has 3gb ram i tried compiling but failed due to errors
many phone are getting cm 14 official and unofficial update but there is now news about htc one mini 2 update for cm 14. please let help us by building a cm 14 custom rom.
Hey, have you tried the CM13 on the 1 mini 2..
yeah.. currently i am using cm13
Working on it
wow! that will be awesome i am eagerly waiting to check cm14 in my htc one mini 2 :crying::crying::crying:
Not much time ago, the one mini 2 gots cm13 unoffical.
Offical cm stopped at cm12.
The reason was: Thw developer sells his phone.
I don't know if memul will ever see cm14.
I never believed that it would get cm13, only after it was there...
nightcore500 is the only one who is developing on memul.
All other threads are dead, no updates and nothing!
Edit:
Its offical> nightcore500 is already working on cm14!
thats awesome!
Unfortunatly ive been unable to actually get CM14 building, mostly due to the fact he refuses to share his device tree files :/ oh well less developement
Did cm14 launched for memul or will it? Is there any good news..
Waiting for it ????
not yet
okay