Hello can you help me how to enable this function again? It stopped working unexpectedly but I can't tell for what reason... I asked my friend with Touch Pro how to disable/enable and he sent me this:
Open the dial pad > press menu > options > advanced > and tick -> vibrate device when connection is established
the problem is i don't have advanced tab in this menu (and yes, I clicked those little arrows)
tnx for your time and help
having same problem
How to disable "Connection Setup" at startup? It's so annoying
Thanks.
spanish rom
sorry men i answer in the wrong post
Go to Start > Settings > Connections > Conection Setup & from Menu options at right bottom uncheck "Enable Automatic Configuration"
Hi,
I´d like to set tasker to turn off wifi when I launch Heartstone and then turn it back on when I turn Heartstone off. Is it possible? Thanks
Profile - state - app: HS
Enter task -> WiFi off
Exit task <- WiFi on.
Hi guys, this is my first guide on XDA
Any suggestions for improving are welcome
I have always been worried about losing my phone, so i made a "Find my phone if all else fails" backup plan (because Googles Device Manager isn't that accurate if you don't have WiFi/data)
What you need:
Tasker (well duh?) [PAID]
Secure settings plugin
Toggle data 5.0 [PAID, but rumor has it there is a free version for XDA members somewhere] (Not needed on Samsung devices, can uses taskers built in data toggle?) I am only using this as the secure settings and taskers inbuilt data toggle did not work for me. They might work for you!
...and Root (Recommended)
You are out with some mates, and you reach into your pocket where your phone should be, and you find....nothing! You don't panic though, as you can just borrow your friends phone, to text yours to find it.
First line of defense
This is a simple, no data, no wifi way of getting an accurate location for your phone.
1. New > Event > Phone > Received text
a. TYPE: Any
SENDER: (Leave blank)
CONTENT: Lost phone (you can change it for your own phrase, and it is case sensitive!)
<Back (top left)
In the popup, select "New Task +", and call it "Lost Reply"
2. Add action > Phone > Send SMS
a. NUMBER: %SMSRF
MESSAGE: Please wait up to two minutes for the location...
<Back (top left again)
b. Add action > Plugin > Secure settings > Configuration (Tap on the pencil) > System+ Actions > GPS > select "On"> Tap the save icon >
<Back (Top Left)
c. Add action > Task > Wait > 5 Seconds >
<Back (you know where)
d. Add action > Location > Get Location > SOURCE: GPS, TIMEOUT (Seconds): 50 [higher the better, more accurate GPS fix] >
<Back
e. Add action > Phone > Send SMS > NUMBER: %SMSRF
MESSAGE:
Im lost! My batt is at: %BATT
Location: %LOC
Accuracy: %LOCACC
GPS stat: %GPS
<Back
f. Add action > Task > Wait > 15 Seconds
<Back
g. Add action > Plugin > Secure settings > Configuration (Tap on the pencil) > System+ Actions > GPS > select "Off"> Tap the save icon >
<Back (Top Left)
Done! you can now track your phone via Text!
Need more tracking ability?
How about you enable the data remotely via text? Then you can use Android device Manager or an installed anti theft app to track your phone!
[You can try kenboyles72 method posted below for enabling/disabling data too]
Data on:
1. New > Event > Phone > Received text
a. TYPE: Any
SENDER: (Leave blank)
CONTENT: Enable Data (you can change it for your own phrase, and it is case sensitive!)
<Back
In the popup, select "New Task +", and call it "Data on Reply"
2.
a. Add action > Plugin > Toggle data 5.0 > tap on "Configuration" > select "Switch on"
<Back
b. Add action > Phone > Send SMS >
NUMBER: %SMSRF
MESSAGE: Data is now ENABLED
<Back
Data Off
1. New > Event > Phone > Received text
a. TYPE: Any
SENDER: (Leave blank)
CONTENT: Disable Data (you can change it for your own phrase, and it is case sensitive!)
<Back
In the popup, select "New Task +", and call it "Data off Reply"
2.
a. Add action > Plugin > Toggle data 5.0 > tap on "Configuration" > select "Switch off"
<Back
b. Add action > Phone > Send SMS >
NUMBER: %SMSRF
MESSAGE: Data is now DISABLED
<Back
Nice guide and works great as you have written above. Just a note, you can enable/disable data via run shell in tasker without any third party app/plugin. I have a profile that toggles data when I'm on wifi.
Turn data off
Run Shell Command:
su
setenforce permissive;
svc data disable;
Check the use root box
Turn data on
Run Shell Command:
su
setenforce permissive;
svc data enable;
Check the use root box
Not sure if this will work on all phones, but works great on my Oneplus One
kenboyles72 said:
Nice guide. just a note, you can enable/disable data via run shell in tasker without any third party app/plugin. I have a profile that toggles data when I'm on wifi.
Turn data off
Run Shell Command:
su
setenforce permissive;
svc data disable;
Check the use root box
Turn data on
Run Shell Command:
su
setenforce permissive;
svc data enable;
Check the use root box
Not sure if this will work on all phones, but works great on my Oneplus One
Click to expand...
Click to collapse
Oooh ok thanks! I didn't know that [emoji2] i could have saved 4 bucks haha
Sent from my HTC One M9 using XDA-Developers mobile app
cjkbarnett said:
Oooh ok thanks! I didn't know that [emoji2] i could have saved 4 bucks haha
Sent from my HTC One M9 using XDA-Developers mobile app
Click to expand...
Click to collapse
Found that command in one of the guides here. I have gone through just about every thread and have greatly expanded my knowledge in tasker. I have bookmarked a lot of 'em, plus I have everything typed out just in case
Edit:
Here's another tip for your script that I just added to mine. In your send text command with just %LOC, you will just get the long and lat numbers and is hard to copy just that text in some message apps. Now if you add
Code:
I’m at http://maps.google.com/maps?z=12&t=m&q=loc:%LOC
this will give a link to google maps with current location and would be easier to use.
Hi,
lets say i want that every time my smartphone connects with the wlan at home bluetooth should be enabled and disabled when i leave the wlan. this is easy to do with tasker.
but when i enable bt manually when i'm not at home, then tasker has nothing to do when i connect to the wlan. but whe i leave it bluetooth will be disabled.
is there any way to prevent bluetooth disable when i've enabled it manually? maybe there is a solution using variables? set a variable from 0 to 1 when bluetooth is enabled manually and not when it enabled automatically via tasker?
Restore settings being enabled in your profile will automatically restore the configuration based on the entry task. Deselect restore settings (long press profile, with it selected tap the cog/gear icon) and expressly restore the settings in your exit task.
In the entry task add a variable set %BTon to "true". Include an "if statement" in the variable set action "if %BLUE does not match on".
Then in the exit task, when you expressly turn off Bluetooth, add an "if statement" to the BT off action so it only runs if the variable "%BTon matches true".
Make sure to add a variable clear for the %BTon variable at the end of your exit task.
Tips
Thanks