Related
Hi there,
I've been searching around to find a specific firmware zip for my new tablet, the SKU: WW, Version: 10.26.1.7.
It appears that asus has pulled this file and was wondering if anyone still has this file available somehow.
I soft-bricked my tablet and am not capable of flashing any other (earlier) firmware zip.
Any help would be greatly appreciated.
Yours sincerely,
Rens "Ikkerens" Rikkerink
Ikkerens said:
Hi there,
I've been searching around to find a specific firmware zip for my new tablet, the SKU: WW, Version: 10.26.1.7.
It appears that asus has pulled this file and was wondering if anyone still has this file available somehow.
I soft-bricked my tablet and am not capable of flashing any other (earlier) firmware zip.
Any help would be greatly appreciated.
Yours sincerely,
Rens "Ikkerens" Rikkerink
Click to expand...
Click to collapse
Why can't you download an earlier firmware?
schmeggy929 said:
Why can't you download an earlier firmware?
Click to expand...
Click to collapse
I can, but it always ends up with some kind of error.
I basically tried following the steps you did:
schmeggy929 said:
i downloaded the asus firmware for 10.14.1.47. extract zip and you get a user.zip. extracted the boot.img. I fastboot erase boot, system, format system, data and cache(as you did)
fastboot -i 0x0B05 flash boot boot.img then
fastboot -i 0x0B05 flash system blob then
fastboot -i 0x0B05 flash system UL-K00C-US-10.14.1.47-user.zip
rebooted back into fastboot and bootloader showed 10.14.1.47 version.
Click to expand...
Click to collapse
But on when trying to flash the ***-user.zip, I get this error message:
Code:
$ fastboot -i 0x0B05 flash system UL-K00C-WW-10.14.1.47-user.zip
target reported max download size of 643825664 bytes
Invalid sparse file format at header magi
Edit: My bootloader version shows: WW_epad-10.26.1.7-20131108
Ikkerens said:
I can, but it always ends up with some kind of error.
I basically tried following the steps you did:
But on when trying to flash the ***-user.zip, I get this error message:
Code:
$ fastboot -i 0x0B05 flash system UL-K00C-WW-10.14.1.47-user.zip
target reported max download size of 643825664 bytes
Invalid sparse file format at header magi
Edit: My bootloader version shows: WW_epad-10.26.1.7-20131108
Click to expand...
Click to collapse
you are going to get that along with a few more errors. Wait until it is done. It will take like 10 mins and finish.
when it is done reboot in bootloader and you should see the version change.
schmeggy929 said:
you are going to get that along with a few more errors. Wait until it is done. I will take like 10 mins and finish.
Click to expand...
Click to collapse
You're getting this wrong, it does not do anything. The process immediately quits.
Ikkerens said:
You're getting this wrong, it does not do anything. The process immediately quits.
Click to expand...
Click to collapse
Ok when you get that message do you get a blinking curser?
Ikkerens said:
Hi there,
I've been searching around to find a specific firmware zip for my new tablet, the SKU: WW, Version: 10.26.1.7.
It appears that asus has pulled this file and was wondering if anyone still has this file available somehow.
I soft-bricked my tablet and am not capable of flashing any other (earlier) firmware zip.
Any help would be greatly appreciated.
Yours sincerely,
Rens "Ikkerens" Rikkerink
Click to expand...
Click to collapse
did you make any backup with cwm recovery?
try this:
unpack blob from 47 update
Code:
fastboot flash staging blob
fastboot flash recovery recovery.img
fastboot reboot-bootloader
load recovery, restore your backup
if you have not made any backup with cwm recovery, tell me.
btw fastboot flash system... is not needed here
lpdunwell said:
did you make any backup with cwm recovery?
try this:
unpack blob from 47 update
Code:
fastboot flash staging blob
fastboot flash recovery recovery.img
fastboot reboot-bootloader
load recovery, restore your backup
if you have not made any backup with cwm recovery, tell me.
btw fastboot flash system... is not needed here
Click to expand...
Click to collapse
I have not made a backup using cwm because there was no CWM available for my version.
My tablet was already updated to 4.3 and I (apparently) could not boot the cwm in the development section.
If I would be able to flash a usable recovery, I wouldn't be in this situation anyway as the asus update (.47) is flashable (found an updater-script in the zip).
Ikkerens said:
I have not made a backup using cwm because there was no CWM available for my version.
My tablet was already updated to 4.3 and I (apparently) could not boot the cwm in the development section.
If I would be able to flash a usable recovery, I wouldn't be in this situation anyway as the asus update (.47) is flashable (found an updater-script in the zip).
Click to expand...
Click to collapse
forget what I wrote here. I opened a thread with unbricking instructions. Good luck
lpdunwell said:
forget what I wrote here. I opened a thread with unbricking instructions. Good luck
Click to expand...
Click to collapse
Won't do me any good at the moment, I already managed to brick it even further (couldn't even get into fastboot mode anymore), so I RMA'd it.
Ikkerens said:
Won't do me any good at the moment, I already managed to brick it even further (couldn't even get into fastboot mode anymore), so I RMA'd it.
Click to expand...
Click to collapse
oh crap. sorry about that. I know there's the nvflash, too, but I have no idea how to use that so far...
would you mind telling what exactly happened?
lpdunwell said:
oh crap. sorry about that. I know there's the nvflash, too, but I have no idea how to use that so far...
would you mind telling what exactly happened?
Click to expand...
Click to collapse
Nvflash is inaccessible at the moment, it requires some preparation (you have to prepare it BEFORE you brick it)
Anyway, basically, I bought the tablet a few hours earlier.
Wanted to root it to remove some bloatware and restore some titanium backup thingies.
So I unlocked, rooted, basic stuff.
Went into TB, removed bloatware such as Amazon Kindle and some other irrelevant titles.
That action however, somehow caused it to be unbootable.
So I went into some basic repair stuff, as usual.
Tried to flash a recovery, only to find out, there is no working recovery. Only CWM, which required an earlier version of my bootloader.
So, what next. Restore stock? Downloaded the firmware, found out it was the earlier version of my device, because Asus removed the 4.3-EU version from their website.
So, I downloaded the .47-EU version, opened it. Saw there were no images, merely plain files meant for /system and an updater-script.
I ended up attempting to package my own system.img after that. Created an ext4 image on my computer, moved the files there. Followed the instructions in updater-script, which were mostly symlinks and stuff.
In the end of the updater-script they flashed blob to /staging and boot.img to /boot.
So, I flashed my custom system.img to /system.
Flashed boot
Flashed the blob
And beyond that point, I ended up in a bootloop of my bootloader. I could not hold down volume to enter fastboot or anything. All I could do was watch the asus logo as it constantly rebooted. (And ofcourse, no way to turn it off other than waiting for the battery to die)
Ikkerens said:
Nvflash is inaccessible at the moment, it requires some preparation (you have to prepare it BEFORE you brick it)
Anyway, basically, I bought the tablet a few hours earlier.
Wanted to root it to remove some bloatware and restore some titanium backup thingies.
So I unlocked, rooted, basic stuff.
Went into TB, removed bloatware such as Amazon Kindle and some other irrelevant titles.
That action however, somehow caused it to be unbootable.
So I went into some basic repair stuff, as usual.
Tried to flash a recovery, only to find out, there is no working recovery. Only CWM, which required an earlier version of my bootloader.
So, what next. Restore stock? Downloaded the firmware, found out it was the earlier version of my device, because Asus removed the 4.3-EU version from their website.
So, I downloaded the .47-EU version, opened it. Saw there were no images, merely plain files meant for /system and an updater-script.
I ended up attempting to package my own system.img after that. Created an ext4 image on my computer, moved the files there. Followed the instructions in updater-script, which were mostly symlinks and stuff.
In the end of the updater-script they flashed blob to /staging and boot.img to /boot.
So, I flashed my custom system.img to /system.
Flashed boot
Flashed the blob
And beyond that point, I ended up in a bootloop of my bootloader. I could not hold down volume to enter fastboot or anything. All I could do was watch the asus logo as it constantly rebooted. (And ofcourse, no way to turn it off other than waiting for the battery to die)
Click to expand...
Click to collapse
Since you are unlocked, you can try to flash the recovery (extract it first) of the US version 1.7, should be the same as wwe. Or just even try to flash the whole us update manually. And later change back to the wwe version when it comes available. The 47 update was only a minor ota for 4.2 so no image of recovery or bootloader there.
Sad story. What would have been the safe thing to do, if others wish to root their devices?
Snah001 said:
Since you are unlocked, you can try to flash the recovery (extract it first) of the US version 1.7, should be the same as wwe. Or just even try to flash the whole us update manually. And later change back to the wwe version when it comes available. The 47 update was only a minor ota for 4.2 so no image of recovery or bootloader there.
Click to expand...
Click to collapse
I still had the original recovery flashed, I never overwrote it actually. I needed a custom recovery (such as CWM, TWRP).
Flashing an US update is not possible alltogether, there are some minor differences with hardware compitability and such.
Problem is, I could've downloaded the .47 update, but I had already updated to 4.3 (BL 10.26.1.7)
Ikkerens said:
I still had the original recovery flashed, I never overwrote it actually. I needed a custom recovery (such as CWM, TWRP).
Flashing an US update is not possible alltogether, there are some minor differences with hardware compitability and such.
Problem is, I could've downloaded the .47 update, but I had already updated to 4.3 (BL 10.26.1.7)
Click to expand...
Click to collapse
I don't know if it isn't possible. On the TF700 it was only a line in the build.prop file that made the difference.
I would try it because now you have nothing and when it works you have the us version yes, but at least it works.
pelago said:
Sad story. What would have been the safe thing to do, if others wish to root their devices?
Click to expand...
Click to collapse
This guide worked fine for me; http://forum.xda-developers.com/showthread.php?t=2516215
It's only about what you do with the root ^^
Snah001 said:
I don't know if it isn't possible. On the TF700 it was only a line in the build.prop file that made the difference.
I would try it because now you have nothing and when it works you have the us version yes, but at least it works.
Click to expand...
Click to collapse
Already too late, it has been RMA'd, and then, I had nothing to flash it with.
Ikkerens said:
This guide worked fine for me; http://forum.xda-developers.com/showthread.php?t=2516215
It's only about what you do with the root ^^
Click to expand...
Click to collapse
Well I meant, what should a root user do to try and protect themselves against bricking their device like you did? Is it a matter of making sure that CWM or TWRP is on the device as a recovery partition? And are those available on TF701T yet?
Oh dear. That's a lot gone wrong.
Cwm is available and that works.
It's made by drgravy. I use it in my unbrick tut.
All i can say is, root --> cwm --> backup.
Sent from my GT-I9505 using xda app-developers app
That CWM wouldn't boot for me :/
THIS APPLIES ONLY TO THE A2017U VARIANT, DO NOT USE THIS FILE ON OTHER VERSIONS
Disclaimer - don't blame me if something goes wrong
As title says, this is a full stock unmodified B20 TWRP system image. It kan be used in addition to stock boot and recovery images to restore the US A7 to conditions which will be like stock and allow to flash upcoming OTA. This was tested by @jkuczera here http://forum.xda-developers.com/showthread.php?t=3459107
Link to system image
https://cloud.swehes.com/index.php/s/31V7GgihohBCdfy
If you are BL unlocked, you will need to lock it before flashing old recovery and boot (this may not be necessary to get MR2 to flash, depending on what it checks, but the phone might not boot, unknown). This will make your phone verify boot, recovery and /system again, so flash TWRP from tenfar's thread to be able boot after relocking since his is signed
To restore, unzip the file above to TWRP folder on the SD Card, then in TWRP under mount points unmount /system and put check mark on mount system as read-only. The read-only part is important so that TWRP does not modify the /system apon exit. You can then restore boot, recovery and system image.
Another partition, fastboot, was altered if you applied B20_boot, but so far no OTA has check it so it should be fine as is. Chance is it will be just overwritten by next OTA, but in case that changes, info will be added. This step is more risky since it involves using dd command and has to be applied carefully.
EDIT: looks like @Unjustified Dev posted new build that will flash fastboot image http://forum.xda-developers.com/showpost.php?p=68677272&postcount=133
You should then boot to stock recovery and factory wipe
In case you did not dump your boot and recovery, they can be found in @rczrider's post here
http://forum.xda-developers.com/axon-7/development/untouched-b20-boot-recovery-files-t3443818
Thanks to @swehes for providing the space on his cloud for this file, @rczrider for rest of the files and @jkuczera for trying this all out
So you need TWRP for this, but will this overwrite the TWRP recovery and make it truly stock?
imp3r10 said:
So you need TWRP for this, but will this overwrite the TWRP recovery and make it truly stock?
Click to expand...
Click to collapse
Indeed and before rebooting , you MUST Wipe Data + Internal Storage, cuz you are flashing new boot and system and will get in conflicts if there no wipe.
Just for clarity sake these are the steps I need to take to get back to B20 from B20_Boot?
1. fastboot oem lock
2. put system image from OP's post AND stock_boot_backup.img AND stock_recovery_backup.img from rczrider's post into TWRP folder.
3. in TWRP unmount /system and check mark on mount system as read only.
4. Flash boot, recovery, and system image.
5. Wipe Data and Internal Storage.
6. Profit?
runderekrun said:
Just for clarity sake these are the steps I need to take to get back to B20 from B20_Boot?
1. fastboot oem lock
2. put system image from OP's post AND stock_boot_backup.img AND stock_recovery_backup.img from rczrider's post into TWRP folder.
3. in TWRP unmount /system and check mark on mount system as read only.
4. Flash boot, recovery, and system image.
5. Wipe Data and Internal Storage.
6. Profit?
Click to expand...
Click to collapse
Pretty much. I would reboot to stock recovery after and factory wipe from there. you might wan't to flash fastboot from B20 OTA for extra profit but seems like it's a moot point so far if you have seen the Unjustified Devs trick for BL unlock via TWRP
peramikic said:
Pretty much. I would reboot to stock recovery after and factory wipe from there. you might wan't to flash fastboot from B20 OTA for extra profit but seems like it's a moot point so far if you have seen the Unjustified Devs trick for BL unlock via TWRP
Click to expand...
Click to collapse
Thanks.
I'm having to do a warranty replacement on my device so i'll probably want to do the fastboot flash. Any idea where to get a fastboot image?
runderekrun said:
I'm having to do a warranty replacement on my device so i'll probably want to do the fastboot flash. Any idea where to get a fastboot image?
Click to expand...
Click to collapse
Step 6 to pull your own: http://forum.xda-developers.com/axon-7/how-to/guide-how-to-unlock-bootloader-stay-t3461165
Or you can download the one I pulled from my device (it can be found in the Mega folder linked in the OP): http://forum.xda-developers.com/axon-7/development/untouched-b20-boot-recovery-files-t3443818
And as option 3 it's inside the B18toB20 OTA file floating somewhere around here
Alright I tried this and something went wrong.
First thing I did was copy all the files where they needed to be. Then I booted into fastboot and did a "fastboot oem lock".
Then my device would do nothing. I would boot up to the ZTE logo then go black a second later. I tried to force into recovery by selecting recovery in fastboot but same thing, ZTE logo then blackness.
I got it back by getting into fastboot and performing a "fastboot oem unlock" again. All it did was wipe data.
What did I do wrong? I thought I am supposed to lock bootloader first before I restore system and flash recover and boot????
runderekrun said:
Alright I tried this and something went wrong.
First thing I did was copy all the files where they needed to be. Then I booted into fastboot and did a "fastboot oem lock".
Then my device would do nothing. I would boot up to the ZTE logo then go black a second later. I tried to force into recovery by selecting recovery in fastboot but same thing, ZTE logo then blackness.
I got it back by getting into fastboot and performing a "fastboot oem unlock" again. All it did was wipe data.
What did I do wrong? I thought I am supposed to lock bootloader first before I restore system and flash recover and boot????
Click to expand...
Click to collapse
Ok so if you modified boot, system or recovery in anyway then after BL lock it will not boot since it will fail secure boot, so you need to load the signed TWRP from tenfar's thread via EDL after locking. That will let you run TWRP with locked BL. Although ig you just want stock for upcoming OTA, then you might be good staying unlocked. If for return, then you should lock it
peramikic said:
Ok so if you modified boot, system or recovery in anyway then after BL lock it will not boot since it will fail secure boot, so you need to load the signed TWRP from tenfar's thread via EDL after locking. That will let you run TWRP with locked BL. Although ig you just want stock for upcoming OTA, then you might be good staying unlocked. If for return, then you should lock it
Click to expand...
Click to collapse
I apologize if I am fundamentaly not understanding this but wouldn't it be easier to flash system, boot, recovery, and fastboot back to stock via my current twrp THEN relock bootloader?
runderekrun said:
I apologize if I am fundamentaly not understanding this but wouldn't it be easier to flash system, boot, recovery, and fastboot back to stock via my current twrp THEN relock bootloader?
Click to expand...
Click to collapse
Yeah, now that we know fastboot will work even on stock boot that will work as well. The only thing you won't be able to do is flash back the B20 fastboot image that way, but enough to pass OTA most likely. The long way you can revert the fastboot image as well. I only wanted to post the image to begin with, but then wrote out instruction as they rolled around in my head. This will change soon anyways so a proper write-up will happen, just not by me, Documentation was never my forte
My BL is unlocked from ZTE right now, If I want to get CM for future but also want upcoming update from ZTE? What are the exact steps that I need to follow to get future OTA but also keep the BL unlocked for future CM? Please help as I'm confused with all these instructions.
peramikic said:
THIS APPLIES ONLY TO THE A2017U VARIANT, DO NOT USE THIS FILE ON OTHER VERSIONS
Disclaimer - don't blame me if something goes wrong
As title says, this is a full stock unmodified B20 TWRP system image. It kan be used in addition to stock boot and recovery images to restore the US A7 to conditions which will be like stock and allow to flash upcoming OTA. This was tested by @jkuczera here http://forum.xda-developers.com/showthread.php?t=3459107
Link to system image
https://cloud.swehes.com/index.php/s/31V7GgihohBCdfy
If you are BL unlocked, you will need to lock it before flashing old recovery and boot (this may not be necessary to get MR2 to flash, depending on what it checks, but the phone might not boot, unknown). This will make your phone verify boot, recovery and /system again, so flash TWRP from tenfar's thread to be able boot after relocking since his is signed
To restore, unzip the file above to TWRP folder on the SD Card, then in TWRP under mount points unmount /system and put check mark on mount system as read-only. The read-only part is important so that TWRP does not modify the /system apon exit. You can then restore boot, recovery and system image.
Another partition, fastboot, was altered if you applied B20_boot, but so far no OTA has check it so it should be fine as is. Chance is it will be just overwritten by next OTA, but in case that changes, info will be added. This step is more risky since it involves using dd command and has to be applied carefully.
EDIT: looks like @Unjustified Dev posted new build that will flash fastboot image http://forum.xda-developers.com/showpost.php?p=68677272&postcount=133
You should then boot to stock recovery and factory wipe
In case you did not dump your boot and recovery, they can be found in @rczrider's post here
http://forum.xda-developers.com/axon-7/development/untouched-b20-boot-recovery-files-t3443818
Thanks to @swehes for providing the space on his cloud for this file, @rczrider for rest of the files and @jkuczera for trying this all out
Click to expand...
Click to collapse
Can someone please explain exactly how to do this. I have an unofficial twrp on my phone and the bootloader is unlocked but after i tried to flash super su it got stuck on bootloop so I wiped every thing and I also accidentally wiped my os too. So now I don't have an os and I want to go back to stock. Can someone please explain step by step on how to fix this? I just got the phone.
seby1234 said:
Can someone please explain exactly how to do this. I have an unofficial twrp on my phone and the bootloader is unlocked but after i tried to flash super su it got stuck on bootloop so I wiped every thing and I also accidentally wiped my os too. So now I don't have an os and I want to go back to stock. Can someone please explain step by step on how to fix this? I just got the phone.
Click to expand...
Click to collapse
All right I'm no expert either but I'll try to make this as straightforward as possible.
1) Format your SD card as exFAT. This is important as otherwise you will not be able to transfer the system image to your SD card since it is 6GB. To do this you can just plug it in to your PC, right click, Format and then select exFAT from the dropdown.
2) Download tenfar's tool for B20, rczrider's boot and recovery backup, and the system image backup from the link in the OP.
3) Create a new folder in /external_sd/TWRP/BACKUPS/serial_number/.Move the stock_boot_backup and stock_recovery backup into the folder.
4) Using a program such as 7zip, extract the 6GB system image file and move it to the same folder.
6) Go to into fastboot mode. Before you do anything you have to relock the bootloader otherwise the system will be modified and you want to be 100? stock. Execute 'fastboot oem lock'. You should then boot to a black screen.
7) Unzip tenfar's tool. Go to the unzipped folder, then hold down shift+right click and select 'Open command window here'. Execute 'axon7root.exe -p [COMPORT #] -r. To figure out your com port #, go to Device Manager, then go to down to where it says "Qualcomm Loader..." and your com port number is the number at the end. So for example if your com port number is 5, you should execute axon7root.exe -p 5 -r. Allow the program to do its thing.
5) Boot into TWRP. Do not swipe to allow modifications. Once in TWRP, go to "Install", "Install Image" at the bottom right hand corner, and then navigate to the stock_recovery_backup in the folder that you moved it to to. Select it and then choose the Recovery partition to flash it to. Do the same thing for stock_boot_backup.
6) Once you have flashed boot and recovery, go to the main menu, then "Restore" and then Restore the system image backup.
7) Go to wipe and then slide to factory reset. Finally, reboot system.
Hope that helps! If you have any questions, feel free to ask me.
rczrider's stock boot and recovery thread
http://forum.xda-developers.com/axon-7/development/untouched-b20-boot-recovery-files-t3443818/page7
tenfar's tool thread: http://forum.xda-developers.com/axo...xon-7-root-bootloader-unlokced-t3441204/page1
Has anyone who requested the bootloader unlock from ZTE (and mistakenly installed it) returned to stock and been able to get OTA's? I followed this guide and seemed to have returned to stock fine but the only OTA I can get now is the bootloader unlock OTA. I've downloaded and discarded it several times but that is the only one I can get. Anyone know of a way to bypass this OTA and get the new MR2 that was just released? I want to get OTA's until the custom roms start flowing.
Thanks!
shifuharris said:
Has anyone who requested the bootloader unlock from ZTE (and mistakenly installed it) returned to stock and been able to get OTA's? I followed this guide and seemed to have returned to stock fine but the only OTA I can get now is the bootloader unlock OTA. I've downloaded and discarded it several times but that is the only one I can get. Anyone know of a way to bypass this OTA and get the new MR2 that was just released? I want to get OTA's until the custom roms start flowing.
Thanks!
Click to expand...
Click to collapse
From what I can tell, once you apply for official bootloader unlock, your IMEI is placed on a list that will not get any future OTA updates set to it.
However, the OTA for B20 to B27 has been uploaded here: https://mega.nz/#F!kYtRAJjJ!5tD1zPpo0nw2tJwhANA9pQ
Try flashing that via stock recovery.
Quick question for anyone who might know.
The Link to system image which is : https://cloud.swehes.com/index.php/s/31V7GgihohBCdfy has the following;
1. system_image.emmc.win
2. system_image.emmc.win.md5
Am I suppose to rename system_image.emmc.win to system_image.emmc.img and load?
it's not as clear that's why I ask but I ended up downloading rczrider system.img and reflashed via TWRP since I was a bit confused.
Thanks!
***************
I simply just went into TWRP backed up by boot so it would create a directory that contains the info I needed copied the system_image.emmc.win and system_image.emmc.win.md5 and restored.
xtermmin said:
From what I can tell, once you apply for official bootloader unlock, your IMEI is placed on a list that will not get any future OTA updates set to it.
However, the OTA for B20 to B27 has been uploaded here: https://mega.nz/#F!kYtRAJjJ!5tD1zPpo0nw2tJwhANA9pQ
Try flashing that via stock recovery.
Click to expand...
Click to collapse
I suspected as much. I downloaded the update and tried to flash it via the stock recovery using the update for ADB option but it fails saying that the package is not a ks package. Booooo. I really wanted this MR becasue they addressed the weak cell signal which I think contributes significantly to my battery drain. Not sure if there are any alternatives to get the update installed. Not very a happy about the ceased OTA's due to the bootloader unlock. Thinking the new Nexus (or whatever they are going to call them) is looking pretty good at the moment.
shifuharris said:
I suspected as much. I downloaded the update and tried to flash it via the stock recovery using the update for ADB option but it fails saying that the package is not a ks package. Booooo. I really wanted this MR becasue they addressed the weak cell signal which I think contributes significantly to my battery drain. Not sure if there are any alternatives to get the update installed. Not very a happy about the ceased OTA's due to the bootloader unlock. Thinking the new Nexus (or whatever they are going to call them) is looking pretty good at the moment.
Click to expand...
Click to collapse
Try the microSD card method instead.
First, make sure OEM Unlocking is checked in developer settings, rename the OTA to "update.zip", put on microSD, boot into stock recovery, and choose update from microSD.
Our phone needs a bootable only TWRP, this is a fact.
This is because of the a/b partitioning but, more, since of the "new" recovery-in-boot.IMG design which links kernel & recovery presence in an unwanted way...
And a bootable TWRP is the "official solution" developed by TWRP Team for Pixel 2/2 XL - the more similar device up to date - to overcome this issue in better way. I fully agree with their solution and I had thought of it even before of their official release...
A LOT of development has been done on this phone during only last month, better installable TWRP, better kernels, better installation methods developed for them, both for first install and for upgrade too, BUT the lack of a boot-only TWRP, something easily (& ever...) accessible with a simple fastboot boot twrpboot.img command is every day more evident...
For some reasons this has been achieved (even if still with limitations...) on Pixels (with available sources obviously...) but, to date, not for our device...
I would like this thread will become the reference thread to all which would want to contribute on this development, a place to report achieved results and faced issues so that others could try to help & overcome them...
We still have a restricted team of developers, but most of them are *great* on their work... I'm sure that only with a bit more teamed up work, this is a result we could achieve in weeks... probably before Christmas!
So, just to start, everyone which has tried to develop (or study...) this, could report what type of issues has faced to date...
I will still have twrp on my boot image. When I was testing kernels without twrp and I got a horrid kernel panic, stock recovery just wiped the device rebooted, wiped, repeat. When I had a bad kernel panic alpha testing on twrp, it would just boot to twrp in tact then I could flash the old kernel. If everything was too messed up, just reflash twrp. All kernels I have made besides the ones that gave those issues work perfect in twrp. Even the ones where bogoMIPS freq was used instead of our frequencies. (38.0 MHz). I like the idea of not having to hook my device up to a computer to boot into recovery.
Uzephi said:
I will still have twrp on my boot image. When I was testing kernels without twrp and I got a horrid kernel panic, stock recovery just wiped the device rebooted, wiped, repeat. When I had a bad kernel panic alpha testing on twrp, it would just boot to twrp in tact then I could flash the old kernel. If everything was too messed up, just reflash twrp. All kernels I have made besides the ones that gave those issues work perfect in twrp. Even the ones where bogoMIPS freq was used instead of our frequencies. (38.0 MHz). I like the idea of not having to hook my device up to a computer to boot into recovery.
Click to expand...
Click to collapse
Yes, I understand this, BUT there are a lot of other scenarios where having a bootable TWRP could save the day and/or at least make things simpler....
On the other hand, you are the first developer I know who is quite ever going without root!
(So you can't be taken as the "average user"... )
enetec said:
Yes, I understand this, BUT there are a lot of other scenarios where having a bootable TWRP could save the day and/or at least make things simpler....
On the other hand, you are the first developer I know who is quite ever going without root!
(So you can't be taken as the "average user"... )
Click to expand...
Click to collapse
I am confused...(I am I am long time enthusiast, pls forgive my naivety!)
I can reboot into twrp without issue using current method in this forum. Is "bootable twrp" referencing where / how twrp is implemented on this device? What are we missing as users and fans of all the great room devs out there by using our current method?
Ty for any insights in advance.
3's&7's said:
I am confused...(I am I am long time enthusiast, pls forgive my naivety!)
I can reboot into twrp without issue using current method in this forum. Is "bootable twrp" referencing where / how twrp is implemented on this device? What are we missing as users and fans of all the great room devs out there by using our current method?
Ty for any insights in advance.
Click to expand...
Click to collapse
The bootable refers to the command fastboot boot boot_a your-filename.img or fastboot boot boot_b your-filename.img . For the Moto Z2 Force, it has to be compiled differently than a boot image intended to be flashed as with the command fastboot flash boot_a your-filename.img , or fastboot flash boot_b your-filename.img . The reason it now has to be compiled differently is that our boot image is combined with recovery. If you try to fastboot boot a fastboot flash type, it would boot normally into Android OS--if all went OK. If you fastboot flash flashed a fastboot boot type, the device would boot into recovery instead of normal Android OS. Both fastboot boot and normal boot result in the kernel and ramdisk being written to RAM--to volatile memory; the difference is whether the data originally came from the device's non-volatile storage or external PC via USB-C cable.
Alternatively, there are two main forms of zip installers for a combined boot image, which are intended to be flashed inside TWRP or an apk like FlashFire (FlashFire does not play nice with already Magisk rooted Z2 Force, in my experience): a zip flash that flashes the entire boot.img (ramdisk + kernel), or a zip flash that only replaces half of the boot image (the ramdisk). For combined boot images, the ramdisk-only type that does not replace kernel is the more common of the two flash zip types on the site TWRP.me . In fact, I have never seen an official installer that also replaced boot image kernel on the official site.
As mentioned above, the fastboot boot type is not meant to be fastboot flash flashed; rather, it is primarily meant to be a platform utilized to flash the TWRP zip installer. You will see some devices on TWRP.me that have both fastboot boot type and zip flash type, and the aforementioned technique is why both are provided. Take a look at Pixel 2 XL (codenamed Taimen) on TWRP.me, and you'll see this method supported.
@jhofseth .... I could never explain it in a better way! :silly::good:
To come back IT... @jhofseth I know you have studied a lot this thing in these weeks, so I have a question for you...
If you take a boot.img containing a TWRP recovery like one we already have, and try a fastboot boot TWRP.IMG it should boot to its included kernel and then to system (if possible...), right?
This way we can test a new kernel without flashing it but it isn't our goal...
Well, when already flashed on phone we can choose between reboot to kernel/system or TWRP by adb commands or by extensions like Gravity Box...
Is it so hard/possible/thinkable to modify one of our boot.img so that it is in some way "forced" to boot to its TWRP in any case?
(and so even when loaded with a fastboot boot command...)
enetec said:
To come back IT... @jhofseth I know you have studied a lot this thing in these weeks, so I have a question for you...
If you take a boot.img containing a TWRP recovery like one we already have, and try a fastboot boot TWRP.IMG it should boot to its included kernel and then to system (if possible...), right?
This way we can test a new kernel without flashing it but it isn't our goal...
Well, when already flashed on phone we can choose between reboot to kernel/system or TWRP by adb commands or by extensions like Gravity Box...
Is it so hard/possible/thinkable to modify one of our boot.img so that it is in some way "forced" to boot to its TWRP in any case?
(and so even when loaded with a fastboot boot command...)
Click to expand...
Click to collapse
I would work on this if someone explains in detail why our current setup is an issue. I have ran into plenty of kernel issues when building bad kernels and twrp as recovery was better than stock recovery (as stated above). Please, I want this if there is a real reason for it. Our stock recovery just factory resets the device, so a recovery with other options is kinda nice.
Temp booting a kernel: use AIK and inject kernel into a boot image.
New TWRP update, just flash the boot image (which might have new boot image as well) and just reflash kernel. It is better than needing to hook the phone up to a PC every time you want to boot TWRP...
enetec said:
To come back IT... @jhofseth I know you have studied a lot this thing in these weeks, so I have a question for you...
If you take a boot.img containing a TWRP recovery like one we already have, and try a fastboot boot TWRP.IMG it should boot to its included kernel and then to system (if possible...), right?
This way we can test a new kernel without flashing it but it isn't our goal...
Well, when already flashed on phone we can choose between reboot to kernel/system or TWRP by adb commands or by extensions like Gravity Box...
Is it so hard/possible/thinkable to modify one of our boot.img so that it is in some way "forced" to boot to its TWRP in any case?
(and so even when loaded with a fastboot boot command...)
Click to expand...
Click to collapse
Yeah, that is one way to test, but sometimes that will fail even when the kernel works. For example, sometimes if you fastboot flash, sometimes you also have to flash latest Magisk again right away in TWRP, or it won't boot into Android OS. That would be impossible with fastboot boot (i.e., unless you patched boot image first with Magisk manager apk, or some other tool), because you would be unable to flash latest Magisk (or SuperSU 2.82 beta SR5). So, sometimes fastboot boot would fail to normally boot into Android OS--even though the kernel may be completely OK.
Uzephi said:
I would work on this if someone explains in detail why our current setup is an issue. I have ran into plenty of kernel issues when building bad kernels and twrp as recovery was better than stock recovery (as stated above). Please, I want this if there is a real reason for it. Our stock recovery just factory resets the device, so a recovery with other options is kinda nice.
Click to expand...
Click to collapse
There are plenty of scenarios where a bootable TWRP could be hassle saving / needed BUT you ask for a single one and I'll give you one... Or two! :laugh:
I want to be free to install the kernel I want with TWRP version I want.
Now this is not possible (if not with weird/tricking installations! ).
E.g.: let's imagine to want to install latest *stock* kernel with latest TWRP.
I have kernel, I have TWRP flashable zips ( @jhofseth made some which are fantastic...) BUT no (simple) way to merge them.
More: as you like to have tweaked kernel BUT without root, there is plenty of people who like to not have TWRP flashed on their systems BUT still being able to make backups and/or flash zips... (e.g. we have already seen some incompatibility between CF-Root and TWRP in past...) and/or remain free to take OTAs... & so on...
I could continue for hours, but these are already valid reasons IMHO...
Pixel 2 developers are not stupid... they have choosed this solution for valid reasons...
enetec said:
There are plenty of scenarios where a bootable TWRP could be hassle saving / needed BUT you ask for a single one and I'll give you one... Or two! :laugh:
I want to be free to install the kernel I want with TWRP version I want.
Now this is not possible (if not with weird/tricking installations! ).
E.g.: let's imagine to want to install latest *stock* kernel with latest TWRP.
I have kernel, I have TWRP flashable zips (@jhofseth made some which are fantastic...) BUT no (simple) way to merge them.
More: as you like to have tweaked kernel BUT without root, there is plenty of people who like to not have TWRP flashed on their systems BUT still being able to make backups and/or flash zips... (e.g. we have already seen some incompatibility between CF-Root and TWRP in past...) and/or remain free to take OTAs... & so on...
I could continue for hours, but these are already valid reasons IMHO...
Pixel 2 developers are not stupid... they have choosed this solution for valid reasons...
Click to expand...
Click to collapse
Answer (I have done this before I flashed TWRP and it worked wonders): root a boot image, go into system, adb shell, su, dd if=/dev/block/sde17(sdf17 for slot B) of=/sdcard/boot.img You now have a rooted bootable image, return to stock image. now you can use Flash Fire to make backups and flash stuff....
You can flash any kernel to TWRP. you want the stock kernel to flash? I can make a flashable zip with the stock kernel by Motorola if needed. It isn't hard tbh...
jhofseth said:
Yeah, that is one way to test, but sometimes that will fail even when the kernel works. For example, sometimes if you fastboot flash, sometimes you also have to flash latest Magisk again right away in TWRP, or it won't boot into Android OS. That would be impossible with fastboot boot, because you would be unable to flash latest Magisk (or SuperSU 2.82 beta SR5).
Click to expand...
Click to collapse
Why do you think a "booted" TWRP wouldn't be able to correctly flash zips?
I don't see reasons for this...
jhofseth said:
...
So, sometimes fastboot boot would fail to normally boot into Android OS--even though the kernel may be completely OK.
Click to expand...
Click to collapse
In fact I wrote "if possible"... BUT anyway this is of no interest. We *only* need to boot to TWRP, we are not interested in boot to an "unflashed kernel" if you understand what I mean...
We have only to force it to boot *ever* in TWRP. Kernel parts not used by TWRP (if some are needed on our phone, like some Mediatek devices need...) could be omitted at all (as done on bootable TWRP for Pixels2 if I don't go wrong...).
Uzephi said:
Answer (I have done this before I flashed TWRP and it worked wonders): root a boot image, go into system, adb shell, su, dd if=/dev/block/sde17(sdf17 for slot B) of=/sdcard/boot.img You now have a rooted bootable image, return to stock image. now you can use Flash Fire to make backups and flash stuff....
You can flash any kernel to TWRP. you want the stock kernel to flash? I can make a flashable zip with the stock kernel by Motorola if needed. It isn't hard tbh...
Click to expand...
Click to collapse
This are exactly the *weird/tricking* solutions I was talkin'about...
(Edit: let me add I don't like this a bit... Root how? Command could be mistyped & flashfire for backups is an orrible & unsafe solution... Just imagine do all this with valuable data in danger... )
All is possible. BUT these are NOT solutions for average user. And every single one requires a different solution/set of commands.
This is not for average user. I repeat it.
You & @johfseth are *NOT* average users... you are fu**ing good developers* and can't evaluate all scenarios with your (advanced) skills & capabilities...
enetec said:
All is possible. BUT these are NOT solutions for average user. And every single one requires a different solution/set of commands.
Click to expand...
Click to collapse
I have offered to give a bootable rooted image to other people in my kernel thread. The thing is, if ANYTHING is edited, OTA won't work, so bootable TWRP won't be feasible, unless you just backup your system and not edit anything.
If the average user can't follow a dd if/of command, would you want them to have to "fastboot boot (image)?" they might flash it, then their boot image needs to be flashed back or it won't boot. There are downsides for bootable TWRP as well. Because we don't know the decryption keys, you still have to wipe data. If you don't decrypt with the zip or SU, you can't update, etc. Decrypting modifies system which in turn makes you not able to get OTAs. It's a vicious cycle. The keys as per DeesTroy change with each boot image, so we would have to make a TWRP that has all keys, then comes to what devices do we support. Currently, the two who are actively developing and have worked on TWRP or assisted with it's boot kernel have only two devices, Sprint and T-Mobile. We wouldn't be able to debug any other model for it's decryption key.
To reiterate: to have working bootable TWRP with all the idiosyncracies you are asking for, we'd have to go through the java code like DeesTroy did and get it working. I am not fluent in java. I can make a bootable TWRP, but you'll have to be decrypted, because I know C and Python which is what kernels and most ROMs use. I don't know much about Java to find the decryption keys for each device.
Edit: for easy analogy: let's say computer languages are like human languages. I know two languages that are anglo-saxan in heritage, but you are asking me to read something latin based. I might know some things in it, but it's all greek to me still... XD
Edit 2: Looking at the TWRP for Pixel 2, the only reason they have a bootable image is to flash TWRP to both boots per their OP. It wasn't suggested to temp boot it for flashing purposes or backup purposes. It was implemented to have it in both boot partitions per the TWRP OP linked here
enetec said:
Why do you think a "booted" TWRP wouldn't be able to correctly flash zips?
I don't see reasons for this...
In fact I wrote "if possible"... BUT anyway this is of no interest. We *only* need to boot to TWRP, we are not interested in boot to an "unflashed kernel" if you understand what I mean...
We have only to force it to boot *ever* in TWRP. Kernel parts not used by TWRP (if some are needed on our phone, like some Mediatek devices need...) could be omitted at all (as done on bootable TWRP for Pixels2 if I don't go wrong...).
Click to expand...
Click to collapse
I understand, I was mainly referring to fastboot stuff, not within TWRP. Any within TWRP stuff was related to Magisk, not the inability of TWRP to flash once TWRP was loaded, but the importance of re-flashing Magisk and the consequences of not re-flashing Magisk. It was really just centered on the importance of re-flashing Magisk. Anything related to kernels stemmed from someone's question about testing kernels. Just minor stuff, but someone asked.
Uzephi said:
...
Edit 2: Looking at the TWRP for Pixel 2, the only reason they have a bootable image is to flash TWRP to both boots per their OP. It wasn't suggested to temp boot it for flashing purposes or backup purposes. It was implemented to have it in both boot partitions per the TWRP OP linked here
Click to expand...
Click to collapse
And this is *ALL* we need IMHO!!!
Is this doable in your (or others...) opinion?
EDIT: and anyway it probably will work fine to flash something and/or to fully backup a system *including* stock boot.img highfive & only excluding encrypted /data (the same encrypted /data our flashed TWRP is unable to manage too... so, what's the point on it? )
Anyway, we are really going OT here... this is not "Could a bootable TWRP be useful?" thread (it's *obvious* it is... ) this is a "What are the issues we have to face & fix to get a working bootable TWRP?" …
So my questions are basically two:
- is there a method to modify (read: force...) a boot.img with TWRP inside like ones we already have so that it boots to TWRP and not to system?
- can Pixels2/2XL bootable-only official TWRP (sources should be available...) be modified to make it work on our (similar...) device?
I would like to keep OTA (at least until there is a lineage os) and must encrypt my z2. Will the bootable TWRP decrypt the system password and allow backup? If I go with a modified boot.img with TWRP, then can I get OTA updates? or must I wait until someone modifies the OTA boot and publishes it? Can I keep one partition with the OTA and the other with a custom rom image?
kendallgreen said:
I would like to keep OTA (at least until there is a lineage os) and must encrypt my z2. Will the bootable TWRP decrypt the system password and allow backup? If I go with a modified boot.img with TWRP, then can I get OTA updates? or must I wait until someone modifies the OTA boot and publishes it? Can I keep one partition with the OTA and the other with a custom rom image?
Click to expand...
Click to collapse
To get OTA, both slots have to have an unmodified boot image, oem image and system. If anything got modified, OTA will fail
Just to link some very useful info(s) posted elsewhere...
https://forum.xda-developers.com/showpost.php?p=74665682&postcount=347
https://forum.xda-developers.com/showpost.php?p=74667790&postcount=350
$50 available via the crypto currency of YOUR choice.
Request: root. Tethered root is ok. Magisk systemless safteynet passing persistent root via zip flashing using persistent twrp is preferred, naturally.
This phone is AMAZING. Also the one sold from motorola.com is bootloader unlockable. The Amazon one is not.
To verify: if you got your z3 play from carrier or Amazon it is not bootloader unlockable.
If you bought from Motorola.com it is bootloader unlockable.
Battery without Moto mod is the best I have ever seen. Screen is amazing. Microsd slot, this is a really good feature. This is what my s9 plus should have been. No bloatware. I only want root for systemwide adblocking. (Adguard systemstore certificate)
With the Moto battery mod you can't run out of battery in a day. It's the best. Hopefully we will get unofficial custom rom someday so I can use Xposed and microg. You would be surprised how much telemetry even "stock like" roms have.
tomkleeeb said:
$50 available via the crypto currency of YOUR choice.
Request: root. Tethered root is ok. Magisk systemless safteynet passing persistent root via zip flashing using persistent twrp is preferred, naturally.
Click to expand...
Click to collapse
An attempt was already made. Using the firmware image someone linked here, I attempted to build and flash a TWRP for the Z3 Play I bought from Best Buy.
The result was a hard brick. Device would no longer power on. (Never seen this before, so it was definitely worth documenting for the TWRP chat)
Got a replacement Z3 Play, rebuilt TWRP but booted the firmware. Hard hang. Tried booting just the boot.img from the firmware image... also a hard hang.
So the software that we have now is not compatible with the Z3 Play.
Root and TWRP will come easily once we have an official image for the phone. It's unlocked, that's usually the hard part. Just gotta wait for Motorola to release the files or source first.
twelfth said:
An attempt was already made. Using the firmware image someone linked here, I attempted to build and flash a TWRP for the Z3 Play I bought from Best Buy.
The result was a hard brick. Device would no longer power on. (Never seen this before, so it was definitely worth documenting for the TWRP chat)
Got a replacement Z3 Play, rebuilt TWRP but booted the firmware. Hard hang. Tried booting just the boot.img from the firmware image... also a hard hang.
So the software that we have now is not compatible with the Z3 Play.
Root and TWRP will come easily once we have an official image for the phone. It's unlocked, that's usually the hard part. Just gotta wait for Motorola to release the files or source first.
Click to expand...
Click to collapse
Can you dump boot.img from the same devise, then fastboot boot boot.img?
If that works...
Could you then use magisk to add systemlessly root to the boot image
Then fastboot boot patched boot.img for tethered root?
This thread shows dumping partitions
https://forum.xda-developers.com/showthread.php?t=2450045
tomkleeeb said:
Can you dump boot.img from the same devise, then fastboot boot boot.img?
Click to expand...
Click to collapse
Not without root.
tomkleeeb said:
This thread shows dumping partitions
https://forum.xda-developers.com/showthread.php?t=2450045
Click to expand...
Click to collapse
Also from that thread:
TheThread said:
Pr-requirement:
- Rooted device.
Click to expand...
Click to collapse
You need root to get boot.img from a device to build TWRP.
or.
You need firmware images to be released by Motorola to build TWRP with the boot.img they release.
or.
You need source.
No way around it.
twelfth said:
You need source.
No way around it.
Click to expand...
Click to collapse
I made a thread on their official forums. https://forums.lenovo.com/t5/Moto-Z...this-phone-D/m-p/4176309/highlight/false#M200
This may seed things along.
if you boot into bootloader and run fastboot getvar all you'll see that our firmware is based on LA.UM.6.2.r1-07200-sdm660.0
so this should be our (incomplete) kernel source
https://source.codeaurora.org/quic/la/kernel/msm-4.4/tag/?h=LA.UM.6.2.r1-07200-sdm660.0
search for LA.UM.6.2.r1 on https://wiki.codeaurora.org/xwiki/bin/QAEP/release and you'll see all the updates we're missing since march
frantisheq said:
if you boot into bootloader and run fastboot getvar all you'll see that our firmware is based on LA.UM.6.2.r1-07200-sdm660.0
so this should be our (incomplete) kernel source
https://source.codeaurora.org/quic/la/kernel/msm-4.4/tag/?h=LA.UM.6.2.r1-07200-sdm660.0
search for LA.UM.6.2.r1 on https://wiki.codeaurora.org/xwiki/bin/QAEP/release and you'll see all the updates we're missing since march
Click to expand...
Click to collapse
I posted on GitHub asking for source.
Anyone wanna bump it?
https://github.com/MotorolaMobilityLLC/kernel-msm/issues/165
i have patched boot.img for 1929-8 using magisk manager apk from magisk 16.7.
not tested, i have locked bootloader.
if you have unlocked bootloader you can try "fastboot boot patched_boot.img" first without flash to see if it even boots. if it does you can try to flash it, extract magisk 16.7 zip and install apk from common folder.
https://drive.google.com/open?id=1n7Wf8ekChsDIUFmya0yFIRFQ581EIQxZ
if you brick your device you're on your own.
also i have sent boot.img to TWRP Builder, hopefully guys there can make a port from it.
frantisheq said:
i have patched boot.img for 1929-8 using magisk manager apk from magisk 16.7.
not tested, i have locked bootloader.
if you have unlocked bootloader you can try "fastboot boot patched_boot.img" first without flash to see if it even boots. if it does you can try to flash it, extract magisk 16.7 zip and install apk from common folder.
https://drive.google.com/open?id=1n7Wf8ekChsDIUFmya0yFIRFQ581EIQxZ
if you brick your device you're on your own.
also i have sent boot.img to TWRP Builder, hopefully guys there can make a port from it.
Click to expand...
Click to collapse
I have 1929-4 and unlocked the bootloader, tried it all, it's useless. (I used the boot of course from my version) Also I tried to port twrp but beyond the splash screen with the inscription twrp it did not work, and my knowledge in programming is almost equal to 0.
thought so. stock boot.img should boot with locked bootloader and it didn't.
ok i'll try to capture OTA url when it's available.
And yet I managed to get the root of the right through the magic and actually boot it. It was necessary in the magic to choose options for patch boot as far as I remember with encryption related, and it worked out))
frantisheq said:
thought so. stock boot.img should boot with locked bootloader and it didn't.
ok i'll try to capture OTA url when it's available.
Click to expand...
Click to collapse
Moto asked what version I need.... What version do we need to build root? https://github.com/MotorolaMobilityLLC/kernel-msm/issues/165
this looks looks like a bad joke. we don't even need to ask them, there's GPL
frantisheq said:
this looks looks like a bad joke. we don't even need to ask them, there's GPL
Click to expand...
Click to collapse
I don't know. I just want root.
I think they can get away with it because source is available upon request, but no one requests it. I am surprised their GitHub doesn't have 1000s of people clamoring for source code for root. This thing is on my short list of phones. Op6/6T would be my next choice but I like microsd more than I like root friendly warrenty.
tomkleeeb said:
I don't know. I just want root.
I think they can get away with it because source is available upon request, but no one requests it. I am surprised their GitHub doesn't have 1000s of people clamoring for source code for root. This thing is on my short list of phones. Op6/6T would be my next choice but I like microsd more than I like root friendly warrenty.
Click to expand...
Click to collapse
Try to boot from my boot (fastboot boot root.boot.img) and if the system boots,you will see in the manager of magics that you already have the root rights, then you can safely flash this boot to yourself (fastboot flash boot root.boot.img) and it will be your root. But twrp recovery I can not yet port unfortunately.(And of course you need to have a bootloader unlocked)
https://drive.google.com/file/d/1wwD4J3DN4sYqfD1hOe0uApHC9tgqKIfu/view?usp=drivesdk
Willy33 said:
Try to boot from my boot (fastboot boot root.boot.img) and if the system boots,you will see in the manager of magics that you already have the root rights, then you can safely flash this boot to yourself (fastboot flash boot root.boot.img) and it will be your root. But twrp recovery I can not yet port unfortunately.(And of course you need to have a bootloader unlocked)
https://drive.google.com/file/d/1wwD4J3DN4sYqfD1hOe0uApHC9tgqKIfu/view?usp=drivesdk
Click to expand...
Click to collapse
Have to buy the phone first lol.
No root = no buy
I just like the idea of the ga!epad controller mod $79.99
Android has no good game controller
kernel source should be released by tuesday
https://github.com/MotorolaMobilityLLC/kernel-msm/issues/165#issuecomment-415027775
i have paid to download firmware for XT1929-8 and unlocked the bootloader.
the bad news, boot.img patched with Magisk won't boot, it just reboots.
the good news, stock boot.img worked so my phone works.
the best news, treble ResurrectionRemix system img for ARM64 a/b with gapps and su just booted up
https://forum.xda-developers.com/pr...pment/gsi-resurrection-remix-o-6-1-0-t3811299
i'm going to try pixel experience later
EDIT: sound works, dual sim works, wifi works, fingerprint works, navigation bar needs to be enabled in settings, battery moto mod seems to be not charging, unable to change display brightness
pixel experience won't boot (maybe it will, it's because i have downloaded a version instead of a/b). i'm back to stock ROM
EDIT2: got root working.
not sure if it's needed but i have used Magisk Manager from https://raw.githubusercontent.com/ianmacd/MagiskBuilds/master/updates/ianmacd.json
installed the apk
set up that URL as custom Update Channel in Magisk manager settings
patched boot.img with "Preserve force encryption" and "Preserve AVB2.0/dm-verity" checked
patched boot.img for xt1929-8 can be downloaded here https://drive.google.com/open?id=11CJ65ojDZmCQVZGSHXicfFSMaenFHiiv
now where is that $50? my donation button still works
EDIT3: got boot.img with working TWRP, but it won't boot Android just TWRP.
if you'd like to try fastboot flash boot_a recovery.img and choose recovery in bootloader menu.
be sure to have boot.img backup before flashing because it won't boot Android and TWRP is unusable as it is, it can't even mount data.
https://drive.google.com/open?id=1C3lcyK3y4RL1Ep56wqWpfw0VWIHuhiO0
Absolutely all the same thing I did with my 1929-4 three days ago ... with twrp the same situation unfortunately ...
i was able to flash magisk and boot.img so it works. still don't know why it won't boot android.
device/motorola/beckham - https://drive.google.com/open?id=1KQ8KFthPJzr1VXt41F9N7O7fY8IRzcb6
T-Mobile G6 H872 11G Stock Collection
Based on OEM 11g KDZ. Extracted and Repacked.
DISCLAIMER
Proceed at your own risk. I am not responsible for any damage to your device.
SysBoot ROMs were test flashed over 11g and 20a bootloaders. 11h has not been tested.
11G Firmware is ARB01
Flashing LAF WILL REMOVE TWRP from your laf partition and restore stock DL Mode
FILE BREAKDOWN
The following Zips DO NOT include stock LAF.
You must flash the provided LAF separately if you wish to go back to stock DL mode
Bootloader: 11g Stock Bootloader ONLY
SysBoot: 11g Boot and System ONLY (Modem, Bootloader not included). These zips are adb sideload compatible.
FullStock: Full 11g Firmware Installation
StockLAF: Individual LAF image for returning to stock DL mode
TWRPLAF: Individual LAF image for replacing stock DL mode with TWRP
Magisk: You know. You must flash this after flashing any of the above packages if you want to stay rooted.
INSTRUCTIONS
Make a FULL TWRP Backup using 3.2.3. Link to thread is below.
Boot to TWRP and do a Format Data to remove encryption from your device.
Reboot back to Recovery after Formatting in order for TWRP to mount System.
Advanced Wipe - System, Data, Cache and Dalvik
Flash your chosen Zip using TWRP
You must have TWRP on recovery to flash LAF images.
It is recommended that Sysboot Images be flashed AFTER Bootloader or FullStock
If you Flashed SysBoot with Patched Kernel and Root, you are good to go. Otherwise, flash Magisk to maintain root access.
Wipe Cache/Dalvik
Reboot to system.
Your phone may reboot once or twice during the initial boot to system. This is normal.
Your phone may hang a while on the boot logo. This is also normal. If hang persists for too long, hold vol-down+power until phone powers off to reboot.
DOWNLOADS
Stable v1.0
Project Files have been moved to SourceForge
TWRP 3.2.3 for H872 by @Eliminator74 - Thank you for all the work you have done for the G6!
Magisk + Magisk Manager
Bootloader - md5:43dcc7f82c501147da6500efdd594d5c
SysBoot ROM - md5:2ac20008794eb74523a442da7b8bafdc
SysBoot Deodexed - md5:b92fcb7649bddf934ff9be0246c9fab6
SysBoot w/Patched Kernel + Magisk Root - md5:ae4bab194a69b2044f3aee69ba495464
FullStock ROM - md5:e919fe16852b5f0b830a48cda914003a
StockLAF - md5:ce70b36e4d293e183544a18409a526de
TWRPLAF - md5:f8ea4e93dc417d2d31f5cb8b77530bfa
These files are long overdue. I hope you all find them helpful. Please let me know if you run into any problems with them. Thanks!
Other H872 Projects
H872 11H Stock Collection
H872 20A SysBoot ROMs (Stock and Rooted)
H872 20D Stock Collection
Announcement
I have officially moved to the V30 and no longer own the G6.
I will still be active in this community, but since I don't have the device any longer I will not be able to test any packages or issues that might arise.
All of my current projects have been tested. If anybody runs into problems, you can still let me know and I'll do my best to support my stock packages.
Thanks guys!
-weakNPCdotCom
XDA:DevDB Information
[STOCK] h87211g, ROM for the T-Mobile LG G6
Contributors
weakNPCdotCom
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.2.3
Based On: 11g KDZ
Version Information
Status: Beta
Current Stable Version: 1.0
Stable Release Date: 2018-09-30
Current Beta Version: 0.9
Beta Release Date: 2018-09-30
Created 2018-09-29
Last Updated 2018-10-19
Thx))) I was very much waiting for this.
I'm now at 20a. if I flash the bootloader only, then the fingerprint scanner will work on custom firmwares? Does the custom LAF work?
DmytroPitenko said:
Thx))) I was very much waiting for this.
I'm now at 20a. if I flash the bootloader only, then the fingerprint scanner will work on custom firmwares? Does the custom LAF work?
Click to expand...
Click to collapse
very welcome. if you flash the bootloader only it will leave whatever laf you have untouched, and yes fingerprint scanner will work with custom ROMs like AOSP Extended.
However, I have not tested running stock 20a with the 11g bootloader. But it doesn't sound like that's what you are wanting to do
*edit*
if you have already flashed a custom Rom and FP doesn't work, simply flashing the 11g bootloader zip will fix it. it is not necessary to reflash the rom
also, not sure why anybody would want to, but 11g bootloader with stock 20a rom will not work. it will hang on the boot logo indefinitely which can be dangerous for your phone. so please make sure you are using a custom Rom or stock 11g with this bootloader
Any way to flash one of these stock images. Rom itself. If you can't get into twrp? Check my post from last night in the root thread and you'll see what I'm on about.
Phone boots but system ui stops which keeps me from getting in. Lost twrp from recovery somehow. All I did was apply a then through substratum and it all went South from there.
Not hounding ya just thought I'd prefer over here and see what you been up to.
When I run step 1 in that root thread I get no hash match and something about with laf or lafbak not being present. Haven't fully fired up the pic too see if I can post the output from that here. (Honestly, was never that good with logs lol)
I'm curious though if flashing your laf (how in the heck it happened is beyond me) if it's possible through adb or lgup would put me back to right.
Sent from my XT1575 using Tapatalk
Ken C said:
Any way to flash one of these stock images. Rom itself. If you can't get into twrp? Check my post from last night in the root thread and you'll see what I'm on about.
Phone boots but system ui stops which keeps me from getting in. Lost twrp from recovery somehow. All I did was apply a then through substratum and it all went South from there.
Not hounding ya just thought I'd prefer over here and see what you been up to.
When I run step 1 in that root thread I get no hash match and something about with laf or lafbak not being present. Haven't fully fired up the pic too see if I can post the output from that here. (Honestly, was never that good with logs lol)
I'm curious though if flashing your laf (how in the heck it happened is beyond me) if it's possible through adb or lgup would put me back to right.
Click to expand...
Click to collapse
Do you still have root? if so you can extract the laf.img file from the StockLAF zip and use adb shell to push it to the dev blocks
put the laf.img file on your sdcard and rename it to laf.bin, and run these
adb shell
su
dd if=/sdcard/laf.bin of=/dev/block/bootdevice/by-name/laf
dd if=/sdcard/laf.bin of=/dev/block/bootdevice/by-name/lafbak
that will restore stock laf
weakNPCdotCom said:
Do you still have root? if so you can extract the laf.img file from the StockLAF zip and use adb shell to push it to the dev blocks
put the laf.img file in the folder with adb.exe, rename it to laf.bin, and run these
adb shell dd if=laf.bin of=/dev/block/bootdevice/by-name/laf
adb shell dd if=laf.bin of=/dev/block/bootdevice/by-name/lafbak
that will restore stock laf
Click to expand...
Click to collapse
Have to have root eh? So I'd need dl mode back to flash the kdz to get root but can't unless the kdz restores laf in the process which if it did this wouldn't be required I'm thinking.
Sorry man just thinking through things.
When y'all are putting in " /by-name/ " it would be h-872 right? Stupid question I know but I've never seen it mentioned straight out anywhere
Sent from my XT1575 using Tapatalk
Ken C said:
Have to have root eh? So I'd need dl mode back to flash the kdz to get root but can't unless the kdz restores laf in the process which if it did this wouldn't be required I'm thinking.
Sorry man just thinking through things.
When y'all are putting in " /by-name/ " it would be h-872 right? Stupid question I know but I've never seen it mentioned straight out anywhere
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Yeah you need to restore stock laf another way if you dont have root. Root is needed for ADB shell.
and no, /by-name/ is the actual folder name. I think it's a directory of symlinks, but i might be wrong. Basically it lets you access a partition or mount point by name. in this case the names of the mount points would be laf and lafbak
weakNPCdotCom said:
Yeah you need to restore stock laf another way if you dont have root. Root is needed for ADB shell.
and no, /by-name/ is the actual folder name. I think it's a directory of symlinks, but i might be wrong. Basically it lets you access a partition or mount point by name. in this case the names of the mount points would be laf and lafbak
Click to expand...
Click to collapse
Ok. Figured it was something like that. Always meant to ask somebody, just never did
Sent from my XT1575 using Tapatalk
weakNPCdotCom said:
FILE BREAKDOWN
The following Zips DO NOT include stock LAF.
You must flash the provided LAF separately if you wish to go back to stock DL mode
[/CENTER]
Bootloader: 11g Stock Bootloader ONLY
SysBoot: 11g Boot and System ONLY (Modem, Bootloader not included). These zips are adb sideload compatible.
FullStock: Full 11g Firmware Installation
StockLAF: Individual LAF image for returning to stock DL mode
Magisk: You know. You must flash this after flashing any of the above packages if you want to stay rooted.
Click to expand...
Click to collapse
Thank you for this weaknpc! This is really saving my a*s. Quick question. If I flash the FullStock version, will I have to unlock the bootloader again? I am using the AEX rom (have twrp 3.2.3 on laf and recovery I believe) and just want to go back to the full 11g firmware. If this works I wont even worry about flashing the laf partition (I would only do that for using LGUP+11g kdz).
ryanrod said:
Thank you for this weaknpc! This is really saving my a*s. Quick question. If I flash the FullStock version, will I have to unlock the bootloader again? I am using the AEX rom (have twrp 3.2.3 on laf and recovery I believe) and just want to go back to the full 11g firmware. If this works I wont even worry about flashing the laf partition (I would only do that for using LGUP+11g kdz).
Click to expand...
Click to collapse
Glad I could help, man. No, none of these will lock your bootloader. They wont touch your recovery partition either. If for any reason you want to go back to stock recovery let me know, I can pack a zip to flash that from your LAF TWRP if you still have it.
weakNPCdotCom said:
Glad I could help, man. No, none of these will lock your bootloader. They wont touch your recovery partition either. If for any reason you want to go back to stock recovery let me know, I can pack a zip to flash that from your LAF TWRP if you still have it.
Click to expand...
Click to collapse
Awesome. Yeah, I am going to give it a flash tomorrow morning. I do not think I will need the stock recovery at this time, but thanks for offering! I have been stuck with the whole twrp on LAF issue, not being able to use LGUP, and this just a godsend to get back to 11g. Thanks again! :good:
weakNPCdotCom said:
Glad I could help, man. No, none of these will lock your bootloader. They wont touch your recovery partition either. If for any reason you want to go back to stock recovery let me know, I can pack a zip to flash that from your LAF TWRP if you still have it.
Click to expand...
Click to collapse
IT WORKED!!!! THANK YOU :good::good: This phone is finally fully useable for me again!
I also saw your post about moving to the V30. Will be investigating that phone at some point.. You rock my friend.
ryanrod said:
IT WORKED!!!! THANK YOU :good::good: This phone is finally fully useable for me again!
I also saw your post about moving to the V30. Will be investigating that phone at some point.. You rock my friend.
Click to expand...
Click to collapse
You are most welcome! But important FYI, I discovered an issue in the original FullStock zip that was causing the laf partition to be flashed over with stock. I am posting an update to the project with another handy file for people with TWRP on recovery. If you downloaded FullStock prior to this morning, you will probably want to reboot to recovery and flash it.
Flashing h87211g_TWRPLAF.zip from custom recovery will put TWRP back on your LAF partition.
If I were to downgrade if able to, would that have a chance? I still am getting stuck in fastboot mode unless I'm hooked up to the pic and let lgup do it's thing.
It detects the device, does it's thing, reboots it and gives me a factory reset phone back just no dl mode.
It's not bricked yet lol.
Sent from my XT1575 using Tapatalk
weakNPCdotCom said:
You are most welcome! But important FYI, I discovered an issue in the original FullStock zip that was causing the laf partition to be flashed over with stock. I am posting an update to the project with another handy file for people with TWRP on recovery. If you downloaded FullStock prior to this morning, you will probably want to reboot to recovery and flash it.
Flashing h87211g_TWRPLAF.zip from custom recovery will put TWRP back on your LAF partition.
Click to expand...
Click to collapse
Ok, so the flash did not go exactly as planned, there was some issues getting into recovery. Let me give you a run down of what I did.
1. Boot into twrp recovery using a reboot app (requires root) from a working rom. (This is really the best way I can get into recovery besides using adb) 2. wiped the system/data/cache/dalvik cache partitions. 3. Flashed the FullStock zip. 4. Flashed magisk and it was unsuccessful (it was not able to mount system or vendor partiton I believe).
I did not realize you need to reboot into recovery from twrp recovery, then flash magisk for it to work. I thought it may have flashed anyway. Needless to say I booted into the system and I had no magisk so no root. When trying to boot back into recovery using the hardware buttons, I could not get into recovery. It took me to the factory reset screen. Usually at this point if you select, yes factory reset the device, it would boot into twrp (I think this is some initial mask that lg puts on the recovery partition? ), but this time it was just a orbiting rainbow colored cicle animation. At this point I was saying "oh fu*#!". Then once that animation was over the phone began boot looping. I thought I bricked the phone at this point. Then I tried getting the phone into download mode by holding the volume up and inserting the usb cable. I got the download mode graphic, and then a second later, bam I was back into twrp! Lol. Crazy. I guess twrp was still on laf after flashing FullStock! So, I think that maybe your FullStock zip flashes the stock recovery partition and not the stock laf partition.
Now I was in twrp I was back in business. This time I did the steps correctly and magisk did flash, however I did not format data so now I was getting the encrypted data issue when booting into the system. Then on the third attempt I booted back into twrp using the download mode trick and this time I got it all right. 1. fully format data partition to clear encryption 2. wiped the system/data/cache/dalvik cache partitions. 3. Flashed the fullstock zip. 4. reboot into recovery using the option in twrp 5. Flashed magisk successfully. 6. Reboot into system 7. Phone booted fine, no encryption issue, magisk manager sees magisk is installed and I have root.
So this is where I am now. The phone works fine and I have root. I am afraid to flash that laf zip with twrp becuase if I am correct, there is some specific hash that has to match the device when twrp is on laf. There are steps regarding this for the root method for the H872. Maybe it works on your phone, but I don't want to assume it will work on mine. I would not like to brick this thing, lol. Maybe I don't know what I am talking about...
Also, everything on this rom works great except for bluetooth audio! For some reason bluetooth audio is super super low even at max volume. When I had 11g before, it wasn't like this so I don't know what the heck happened! Through the headphones you get a prompt asking if you want to raise the volume above the limit but nothing like that for bluetooth. Does anyone know how to fix this? (Btw, I thought magisk viper4adroid might solve the issue but it does not work for me with this rom. I tried it and it just crashed system ui after reboot, almost got in a bootloop from it. Luckily I was able to disable the module after another boot)
So, if I can't fix bluetooth volume, I will be running this for a while, then I will flash the stock laf to get real download mode back and do a full kdz flash using lgup so I am truly back to stock. Then I will follow the H872 root process from the ground up, etc.
Either way thanks for this npc. At least I am able to have 11g! Thanks for your hard work. :good:
ryanrod said:
Ok, so the flash did not go exactly as planned, there was some issues getting into recovery. Let me give you a run down of what I did.
1. Boot into twrp recovery using a reboot app (requires root) from a working rom. (This is really the best way I can get into recovery besides using adb) 2. wiped the system/data/cache/dalvik cache partitions. 3. Flashed the FullStock zip. 4. Flashed magisk and it was unsuccessful (it was not able to mount system or vendor partiton I believe).
I did not realize you need to reboot into recovery from twrp recovery, then flash magisk for it to work. I thought it may have flashed anyway. Needless to say I booted into the system and I had no magisk so no root. When trying to boot back into recovery using the hardware buttons, I could not get into recovery. It took me to the factory reset screen. Usually at this point if you select, yes factory reset the device, it would boot into twrp (I think this is some initial mask that lg puts on the recovery partition? ), but this time it was just a orbiting rainbow colored cicle animation. At this point I was saying "oh fu*#!". Then once that animation was over the phone began boot looping. I thought I bricked the phone at this point. Then I tried getting the phone into download mode by holding the volume up and inserting the usb cable. I got the download mode graphic, and then a second later, bam I was back into twrp! Lol. Crazy. I guess twrp was still on laf after flashing FullStock! So, I think that maybe your FullStock zip flashes the stock recovery partition and not the stock laf partition.
Now I was in twrp I was back in business. This time I did the steps correctly and magisk did flash, however I did not format data so now I was getting the encrypted data issue when booting into the system. Then on the third attempt I booted back into twrp using the download mode trick and this time I got it all right. 1. fully format data partition to clear encryption 2. wiped the system/data/cache/dalvik cache partitions. 3. Flashed the fullstock zip. 4. reboot into recovery using the option in twrp 5. Flashed magisk successfully. 6. Reboot into system 7. Phone booted fine, no encryption issue, magisk manager sees magisk is installed and I have root.
So this is where I am now. The phone works fine and I have root. I am afraid to flash that laf zip with twrp becuase if I am correct, there is some specific hash that has to match the device when twrp is on laf. There are steps regarding this for the root method for the H872. Maybe it works on your phone, but I don't want to assume it will work on mine. I would not like to brick this thing, lol. Maybe I don't know what I am talking about...
Also, everything on this rom works great except for bluetooth audio! For some reason bluetooth audio is super super low even at max volume. When I had 11g before, it wasn't like this so I don't know what the heck happened! Through the headphones you get a prompt asking if you want to raise the volume above the limit but nothing like that for bluetooth. Does anyone know how to fix this? (Btw, I thought magisk viper4adroid might solve the issue but it does not work for me with this rom. I tried it and it just crashed system ui after reboot, almost got in a bootloop from it. Luckily I was able to disable the module after another boot)
So, if I can't fix bluetooth volume, I will be running this for a while, then I will flash the stock laf to get real download mode back and do a full kdz flash using lgup so I am truly back to stock. Then I will follow the H872 root process from the ground up, etc.
Either way thanks for this npc. At least I am able to have 11g! Thanks for your hard work. :good:
Click to expand...
Click to collapse
I'm sorry that you had a little trouble. It actually makes sense that you needed to format data. I will update the instructions to start things off with that step.
The actual, proper procedure, would be to format data, reboot back to recovery, wipe system, data, dalvik and cache and then flash FullStock and Magisk.
I'm glad you still had TWRP on laf. Maybe I was looking at an old updater-script. I do know, however, that I removed the recovery flash from the rom so that never should have been replaced. What I think might have happened with you is the Stock firmware's recovery repair feature. Since Magisk didnt flash correctly and you booted to OS, it would have tried to repair stock recovery.
As for the TWRP LAF zip, it is an exact image of the LAF partition after it was processed by @runningnak3d's root procedure. So there shouldnt be any checksum issues at all. It should be totally safe.
The bluetooth thing is probably the most puzzling to me. I extracted all of the images in these roms directly from the stock KDZ. Your system should be a mirror image of any device flashed with LGUP.
Try flashing the SysBoot ROM on top of what you have now. The file structure in that rom is different. Instead of extracting a system image to your system block (the way fullstock does) it actually flashes all of the individual system directories to their designated blocks. I have a feeling that it may fix your issue.
Thank you very much for the information. If you end up doing anything else let me know how it turns out. If I can help you not have to flash the KDZ then I'll be happy. That was my main goal in creating these packages.
weakNPCdotCom said:
I'm sorry that you had a little trouble. It actually makes sense that you needed to format data. I will update the instructions to start things off with that step.
The actual, proper procedure, would be to format data, reboot back to recovery, wipe system, data, dalvik and cache and then flash FullStock and Magisk.
I'm glad you still had TWRP on laf. Maybe I was looking at an old updater-script. I do know, however, that I removed the recovery flash from the rom so that never should have been replaced. What I think might have happened with you is the Stock firmware's recovery repair feature. Since Magisk didnt flash correctly and you booted to OS, it would have tried to repair stock recovery.
As for the TWRP LAF zip, it is an exact image of the LAF partition after it was processed by @runningnak3d's root procedure. So there shouldnt be any checksum issues at all. It should be totally safe.
The bluetooth thing is probably the most puzzling to me. I extracted all of the images in these roms directly from the stock KDZ. Your system should be a mirror image of any device flashed with LGUP.
Try flashing the SysBoot ROM on top of what you have now. The file structure in that rom is different. Instead of extracting a system image to your system block (the way fullstock does) it actually flashes all of the individual system directories to their designated blocks. I have a feeling that it may fix your issue.
Thank you very much for the information. If you end up doing anything else let me know how it turns out. If I can help you not have to flash the KDZ then I'll be happy. That was my main goal in creating these packages.
Click to expand...
Click to collapse
Ahh yes this makes sense. Maybe it was a stock recovery repair due to magisk failure as you mentioned? I still don't understand why with these LG phones (ever since the G3 I think), when you boot into recovery using the hardware buttons, it asks if you want to factory reset the device. Then if you say yes, it doesn't reset/format anything, and it boots right into twrp recovery after that. So weird. I can boot directly into recovery just fine from a reboot app or adb from a running system without getting that factory reset screen...
I'm sure your laf zip with twrp works for the reasons you mention. Luckily I don't have to find out since my laf partition is fine and still has twrp!
Regarding bluetooth, I will give the sysboot flash a try and update you with the results. First I want to wait until my backup phone is running again. I bent the sim pins on the backup phone due to those ****ty plastic adapters that catch the pins (an old E980 w/ the larger sim size) so I ordered another sim reader to fix that. I also read in some forums that wiping cache and dalvik cache resolved others bluetooth issues with the G6. I will try that too.
Either way, I will update soon. I am happy to share my notes as I really appreciate the help!
@weakNPCdotCom
The actual, proper procedure, would be to format data, reboot back to recovery, wipe system, data, dalvik and cache and then flash FullStock and Magisk.
I'm rooted and running an old version of aex. I'm still getting the encryption message anytime I try anything without that rom. These last two posts. When you talk about formatting your saying in twrp correct? Or that forced format you can do with the buttons?
Basic point is I'd like to get rid of that encryption message and it looks like your instructions take place after we achieve root. I'm wondering if I should just kdz to 11g and root from there. Or would just flashing your full stock zip do it? I seem to be the only one having such an issue with it so I'm figuring I'm missing something somewhere that y'all are doing or whatever that's getting by me.
Sent from my LG-H872 using Tapatalk
Ken C said:
@weakNPCdotCom
The actual, proper procedure, would be to format data, reboot back to recovery, wipe system, data, dalvik and cache and then flash FullStock and Magisk.
I'm rooted and running an old version of aex. I'm still getting the encryption message anytime I try anything without that rom. These last two posts. When you talk about formatting your saying in twrp correct? Or that forced format you can do with the buttons?
Basic point is I'd like to get rid of that encryption message and it looks like your instructions take place after we achieve root. I'm wondering if I should just kdz to 11g and root from there. Or would just flashing your full stock zip do it? I seem to be the only one having such an issue with it so I'm figuring I'm missing something somewhere that y'all are doing or whatever that's getting by me.
Sent from my LG-H872 using Tapatalk
Click to expand...
Click to collapse
What Encryption message are you talking about? The one in TWRP where it asks you for a Passcode?
So far, I have tried removing dm-verity and force-encryption from both the 11h and 20a kernels, but I have not been successful. The OS always ends up encrypting data. However, after I flash Magisk I no longer get any passcode prompts in TWRP. I am able to backup and restore system and data no problem.
The only thing I have not tried is a rom packed with dm-verity and force-encrypt removed and root built in. That is the next thing on my list once I get a deodexed 11h rom done.
weakNPCdotCom said:
What Encryption message are you talking about? The one in TWRP where it asks you for a Passcode?
So far, I have tried removing dm-verity and force-encryption from both the 11h and 20a kernels, but I have not been successful. The OS always ends up encrypting data. However, after I flash Magisk I no longer get any passcode prompts in TWRP. I am able to backup and restore system and data no problem.
The only thing I have not tried is a rom packed with dm-verity and force-encrypt removed and root built in. That is the next thing on my list once I get a deodexed 11h rom done.
Click to expand...
Click to collapse
weakNPCdotCom said:
What Encryption message are you talking about? The one in TWRP where it asks you for a Passcode?
So far, I have tried removing dm-verity and force-encryption from both the 11h and 20a kernels, but I have not been successful. The OS always ends up encrypting data. However, after I flash Magisk I no longer get any passcode prompts in TWRP. I am able to backup and restore system and data no problem.
The only thing I have not tried is a rom packed with dm-verity and force-encrypt removed and root built in. That is the next thing on my list once I get a deodexed 11h rom done.
Click to expand...
Click to collapse
Yes that's the message I get. So your saying not to worry about it for the moment? I only see it regularly on a stock rom when going into recovery not aex.
I just wanted to make sure. With the mess I been going through.
So, I can flash this stock build you have and if I wanted normal download back flash the laf zip and I'll have DL mode on laf, twrp on recovery and everything should Mount correctly and all that?
And if I go to flash something custom FP will work? I know I'm a pain I just want to "know" my setup isn't weird somehow. Probably over thinking it, but I think I'm good, except that when I rooted I was getting that message off & on, on the stock build of 20a. I'm hoping that running this build I can get that worked out. Maybe that deal is a 20a thing? Reading through the root thread it seemed to happen less to people on a lower numbered build and it would stop after the format.
I can make backups Burt I've yet to try to restore one.
Sent from my LG-H872 using Tapatalk