The situation is this, i try to change my phone to efs partition, i changed and after some weeks i decided get back to ext4, but during this procedure, the partitiol table got corrupted/broken, so everytime i flashed a rom it was good but on recovery, the data partition shows an error on log, when it booted, i noticed that my sensors stopped working, rotation screen brightness controller, among others, i had no other option than restore to stock, and i did, but my sensors keep not working, and i already flash the 5.0 and 6.0.1 and the result is the same, isnt suppost a rom include the sensor drivers?
Im 100% sure it isnt a hardware problem, please if anyone could help me i would be very gratefull, thanks
Related
Since i've update my SGS to android froyo the Proximity sensor stoped working and the position sensor taken 30sec to turn the image...
I've used the test mode code to check hardware error, but there everything is working perfectly...
If I put the Android 2.1 the problem doesn't show up.
Does anyone have the same problem or solution?
Nobody has this issue?
Is quite strange... because if i put a Android 2.1 ROM everything works just fine, but with later version of android the sensors still working (using test mode from SGS Tools, I confirmed that the sensors are just fine), but the system takes a huge time (~30sec) to do something...
Please, if anyone knows anything that could solve this problem, please say something!
I think that in the first week that I had Froyo everything warked fine, but I'm not sure...
Is there any way to do a complete reset and set everything to default values including Hardware settings?
I've already done Factory reset and Full factory reset, by CWM and Code.
Nobody??? Anything???
Is this a genuine samsung rom you are using .
A flashed rom or a genuine Kies updated firmware .
jje
I'm now using a ROM official (sam***gfirmwares.co*) flashed by ODIN.
Should I try use Kies?
No i was just trying to rule out a flakey rom .
My usual suggestion is a wipe via ODIN
http://forum.xda-developers.com/showthread.php?t=882014
But i would stop at Eclair and see if its solved the problem if OK upgrade further .
jje
Its the same thing...
Its quite awkward, because only apendds in Froyo...
why not try a custom froyo rom, head over to doc's kitchen and cook yourself one up. also try lagfix, and any other speed up tweaks. how does the phone respond normally ?? without the sensors ? is it quite speedy or does it lag ??
The phone work just fine but when i turn the phone it take a lot of time to twist the image... I can even still interact with the screen until it turns...
The proximity sensor takes a lot of time too...
No one else has this problem?
Hi guys...
I've a problem (and i think i see this problem with same reasons on other problem that mine)
However, i tried each of ROM on my GS device, and each ROM working perfectly in first time, but after i saw any sensors are not working. Accelerometer, commpass, light sensor etc.
If you clikc the link (please see top) you can see my Voice Call problem, i think this problem is same this (so light and nearrest sensor not working and so my screen is not turn to on (lighting)
Anybody have an idea?
I was remember only one detail;
I installed SBL version of this firmware without check Phone Bootloader Update... and i think works fine...
But later i installed same version but with check Phone Bootloader Update...
Some professionals are there ? I think if this is an bootloader problem, how i can get my clear bootloader with JVK, if not what is the problem?
I don't know why but...
I reinstalled the JVK / SBL version, with out Phone Bootloader Update check (so noy checked).
Now all sensors are works perfectly...
I think, problem is checked Phone Bootloader Update
or
Rooting with CF JV1
I'm not sure so i'm very tired, i can't install and crash my device again
Hi guys,
this is gonna be a long story, but I'm at end of my wits.
So my phone (HTC One M7_UL Vodafone DE) got water damaged (it was submerged in water for at least a minute). I tested it again last weekend and it seemed to work in terms of hardware. I managed to test the speakers, the charge jack, the headphones jack, wifi, gsm, both cameras, etc. it all seems to work fine, and it's not about that anyways. I kept getting a "com.htc.htcdialer" issue, saying the process had unexpectedly crashed and then a few minutes later the phone would reboot. I tried finding out what this error was and how to fix it but I couldnt find anything. Also its weird that I got a software error.
So I unlocked the bootloader (via htcdev.com), flashed the latest recovery (I tried both cwm and twrp), which was also fine. I managed to install the latest Android Revolutions HD (53.0) and thats where the problems started again: I would get to the lock screen but as soon as I would swipe up to unlock it I would the white screen with the HTC letters on it. I tried wiiping all the cache and partitions i could find and reinstalled that rom, but the problem remained the same. Tried a different recovery (twrp) repeated all the steps and still no more luck than before.
So I decided to give a different rom a try and just flashed the latest stable cyanogenmod rom on it, and that boots fine, but eventually without error message reboots as well.
Then I tried flashing the latest viper rom, but there I have the same issue as at the beginning, that I get as far as the lock screen and then it just wont let me unlock it.
And that's where Im at the end of my wits. I cant imagine its a hardware related issue, but i might be wrong.
Ideally I would love to get my hands on a nandroid backup to restore the phone to stock, a stock rom ruu, but I cant find any of those either.
I'd really appreciate your help.
Let me know if you need specific details of installations, versions, decide numbers, etc
Hi,
i flashed my Pro and unfortunately wiped the persist partition. After booting everything worked fine except the proximity sensor. I searched the internet and found a solution to flash the persist_1.img. After flashing the persist_1.img the Pro crashed again and again with the blue LED on. The only way to use it was wiping the persist partition and reinstalling, but now i have no proximity sensor.
Is there any solution to get my proximity sensor back?
Thanks!
Edit: Unfortunately i am not allowed to post links...
Solved. I flashed 1.9 with qfil and after that installed aicp.
Thats the short Version, it took me 5 hours at least...
It was alright before. I captured one today. That got green when i turned on flash light. Then I checked third party app. It also got green. Is it for the august update? Plz help.
Backup your phone with Samsung Smart Switch and re-flash the newest firmware for your carrier. Before restoring the backup test the camera... If the problem persists, it is likely hardware related (bad camera module) and will need to be sent in for repair.
If the camera suddenly works, restart the phone and try again a few times to be sure it keeps working...
Then just restore your backup and try again. If it does it again, it's software related and you should reset and ONLY restore the files you REALLY NEED.... NO SETTINGS OR APPS!!
Good Luck!