So I have been trying to install a custom recovery on my rooted phone, I am on 5.0.1 or 5.1.1 not sure at the exact moment but when I go to install TWRP Odin mode I believe it is, is stopping me from continuing so the device is just sitting at "Downloading... Please do not turn off the target". I attempted multiple different flash APKs (Because I don't have a computer). I did see another post with someone who has the same problem (not sure if he used a PC) but this is very annoying. Can someone please assist me?
I am making sure my device is rooted, I have the proper version for my device I just need to use this to install Xposed installer on my phone, but again, no PC access..
MrAddictedGamer000 said:
So I have been trying to install a custom recovery on my rooted phone, I am on 5.0.1 or 5.1.1 not sure at the exact moment but when I go to install TWRP Odin mode I believe it is, is stopping me from continuing so the device is just sitting at "Downloading... Please do not turn off the target". I attempted multiple different flash APKs (Because I don't have a computer). I did see another post with someone who has the same problem (not sure if he used a PC) but this is very annoying. Can someone please assist me?
I am making sure my device is rooted, I have the proper version for my device I just need to use this to install Xposed installer on my phone, but again, no PC access..
Click to expand...
Click to collapse
Based on a post you made in one of the other threads it sounds like you have the i537 (AT&T version of the phone). If this is the case you have a locked bootloader, meaning you cannot flash any custom recovery. You're only option is to use FlashFire to flash things.
If I misinterpreted what you said and you do indeed have the i9295 (international version of the phone), you should be able to put a custom recovery on your phone.
Based on what you said above, you are putting the phone in download mode where you can use Odin to flash things to your phone. Odin is a PC program and you can only use the phone in download mode in conjunction with a computer. You need to put your phone in recovery mode in order to be able to flash things without a computer. It sounds like you need to do some more reading about what you're attempting to do and how your phone works because you are starting to mess with some low-level programming on your phone and you could permanently brick it.
This is true, I have the AT&T variant. My friend sold me this for real cheap so brick in it isn't the worst thing. I did state I cannot use a PC as I do not have one. I also don't believe I can put my phone into recovery mode, or at least I don't know how. I tried [HOME+PWR+VolDown] and I believe it tried to install the recovery. So, maybe I am missing something there is a lot to read. Do I need a computer to do this or can I found it without?
Could you please maybe private message me or leave it here, a step tutorial on how to put this phone into recovery and install the a custom ROM. (I know how to use flashify already) the only issue is the locked bootloader. Thanks for the information. I do not have the international phone. Just AT&T. Not unlocked.
You cannot install a custom recovery or flash anything through the recovery menu because AT&T locked the bootloader. The only ROM that exists right now for the i537 is the Slick As Hell ROM in the development section.
As far as learning more, check the stickies it's always a good place to start.
http://forum.xda-developers.com/gal...alaxy-s4-active-firmware-guide-t2892445/page1
Hello, Please I want to ask if i need to unlock my bootloader before flashing the recovery or roms on this i537 running android 4.3
Devo7v said:
You cannot install a custom recovery or flash anything through the recovery menu because AT&T locked the bootloader. The only ROM that exists right now for the i537 is the Slick As Hell ROM in the development section.
As far as learning more, check the stickies it's always a good place to start.
http://forum.xda-developers.com/gal...alaxy-s4-active-firmware-guide-t2892445/page1
Click to expand...
Click to collapse
Hello,
I have the Samsung Galaxy S4 Active i537 AT&T (UCUBML2) running Android 4.3 .....
I have root, done by towel root, and ive installed the safestrap recovery
Please could you point me to the right direction to upgrading to 4.4.2 or 5. (Lollipop)
Thanks in advance
dedon4christ5 said:
Hello,
I have the Samsung Galaxy S4 Active i537 AT&T (UCUBML2) running Android 4.3 .....
I have root, done by towel root, and ive installed the safestrap recovery
Please could you point me to the right direction to upgrading to 4.4.2 or 5. (Lollipop)
Thanks in advance
Click to expand...
Click to collapse
You didn't need to post this question on two different threads. Check the other links in the stickies.
Related
I have newly acquired a samsung s4 active with 4.2 stock. I couldn't OTA upgrade or manually (keeps failing halfway through), couldn't flash 4.4 ROM through recovery, and couldn't do backups through ROM manager and recovery 3.0+
At this point i'm not sure what i should do. i'd like to set my phone up and forget it.. but nothing is really going easy for me. is this because of the s4 active recovery? why is it so hard to change that darn 4.2 stock rom?
30secs said:
I have newly acquired a samsung s4 active with 4.2 stock. I couldn't OTA upgrade or manually (keeps failing halfway through), couldn't flash 4.4 ROM through recovery, and couldn't do backups through ROM manager and recovery 3.0+
At this point i'm not sure what i should do. i'd like to set my phone up and forget it.. but nothing is really going easy for me. is this because of the s4 active recovery? why is it so hard to change that darn 4.2 stock rom?
Click to expand...
Click to collapse
It depends on which version of the phone you have. If you have the i9295, then it really shouldn't be that hard to do what you are asking about. If you have the i537 then you can't really do anything you're asking about because it has a locked bootloader. If you have the i537 you need to check out SafeStrap.
i believe i do have the i537. is there a thread i can check out to help with getting started on custom recovery roms etc?
30secs said:
i believe i do have the i537. is there a thread i can check out to help with getting started on custom recovery roms etc?
Click to expand...
Click to collapse
The i537 has a locked bootloader which means you cannot install a custom recovery or any other kernel. Your only option is to use SafeStrap along with 4.2.2 TouchWiz-based ROMs. Read more about SafeStrap here and a list ROMs that will work with SafeStrap here.
Because of the locked bootloader you will not be able to use CyanogenMod, any CM-based ROM, or any AOSP-based ROM. The only ROM I like using that is different than the stock ROM is the 4.2.2 GPe. Do some reading before you try SafeStrap, otherwise you could brick your phone pretty easily.
Hey guys so recently I had rooted my i537 S4 active and have been researching and modifying here and there until i decided to get a custom ROM. I found WickedROM via this post http://forum.xda-developers.com/show....php?t=2491762 and considering it had worked on this person's i537 I decided to flash the ROM. After flashing I had become stuck in a bootloop and I can't get to anything besides DOWNLOAD MODE. Due to this problem I decided to run a stock firmware via Odin with this one_click http://rootzwiki.com/topic/44121-sgh...axy-s4-active/ ... this filled up until the bar was about 90% and then all of a sudden fails at <ID:0/003> system.img.ext4. I've tried other firmwares with no luck and have resorted to posting about this problem. please help and guide me in the right direction, my phone's been bricked for 3 days now. Trying to boot into recovery gives me the "there's been a problem with your firmware update, please run in Kies recovery" and Kies doesn't recognize my phone.
nickeon1 said:
After flashing I had become stuck in a bootloop and I can't get to anything besides DOWNLOAD MODE.
Click to expand...
Click to collapse
You forgot to flash the masterpatch which makes roms designed for the AT&T S4 (not active) work for our phone. If I understand correctly it needs to be flashed immediately after the rom is installed (i.e. still in SafeStrap, before you attempt to boot up).
nickeon1 said:
Due to this problem I decided to run a stock firmware via Odin with this one_click http://rootzwiki.com/topic/44121-sgh...axy-s4-active/ ... this filled up until the bar was about 90% and then all of a sudden fails at <ID:0/003> system.img.ext4 and Kies doesn't recognize my phone.
Click to expand...
Click to collapse
That link is for MF1, an outdated firmware. Here is a collection of stock i537 firmwares. I can personally confirm the NH3 file is usable since I used it to upgrade to the most recent firmware without losing root.
This thread will provide you instructions on how to use Odin to flash any stock firmware. I can only add I recommend using Odin v3.07, as I've used it with the most success and fewest issues. Also use NH3 firmware or at the very least NE3, because anything else is outdated, assuming you were on stock KitKat originally, and you will encounter similar issues if trying to downgrade to jellybean.
Also flashing with Odin deletes all your saved files/user info etc. on your phone. From the sound of it, fixing your phone is going to involve inevitably wiping it one way or the other, so I hope you have a backup saved somewhere other than your phone's internal memory.
nickeon1 said:
Hey guys so recently I had rooted my i537 S4 active and have been researching and modifying here and there until i decided to get a custom ROM. I found WickedROM via this post http://forum.xda-developers.com/show....php?t=2491762 and considering it had worked on this person's i537 I decided to flash the ROM. After flashing I had become stuck in a bootloop and I can't get to anything besides DOWNLOAD MODE. Due to this problem I decided to run a stock firmware via Odin with this one_click http://rootzwiki.com/topic/44121-sgh...axy-s4-active/ ... this filled up until the bar was about 90% and then all of a sudden fails at <ID:0/003> system.img.ext4. I've tried other firmwares with no luck and have resorted to posting about this problem. please help and guide me in the right direction, my phone's been bricked for 3 days now. Trying to boot into recovery gives me the "there's been a problem with your firmware update, please run in Kies recovery" and Kies doesn't recognize my phone.
Click to expand...
Click to collapse
When you flash back to stock, you can only flash a version that is equal to or greater than the version you were already on. So if you were originally on 4.4.2 you can only flash a 4.4.2 stock ROM, any other ROM will fail to flash.
thisisapoorusernamechoice said:
You forgot to flash the masterpatch which makes roms designed for the AT&T S4 (not active) work for our phone. If I understand correctly it needs to be flashed immediately after the rom is installed (i.e. still in SafeStrap, before you attempt to boot up).
That link is for MF1, an outdated firmware. Here is a collection of stock i537 firmwares. I can personally confirm the NH3 file is usable since I used it to upgrade to the most recent firmware without losing root.
This thread will provide you instructions on how to use Odin to flash any stock firmware. I can only add I recommend using Odin v3.07, as I've used it with the most success and fewest issues. Also use NH3 firmware or at the very least NE3, because anything else is outdated, assuming you were on stock KitKat originally, and you will encounter similar issues if trying to downgrade to jellybean.
Also flashing with Odin deletes all your saved files/user info etc. on your phone. From the sound of it, fixing your phone is going to involve inevitably wiping it one way or the other, so I hope you have a backup saved somewhere other than your phone's internal memory.
Click to expand...
Click to collapse
Thanks very much for this! I flashed an NE3 firmware and was able to get my phone in working condition. So if I wanted to flash a rom on my phone I would have to masterpatch AFTER the rom flash via Safestrap?
nickeon1 said:
Thanks very much for this! I flashed an NE3 firmware and was able to get my phone in working condition. So if I wanted to flash a rom on my phone I would have to masterpatch AFTER the rom flash via Safestrap?
Click to expand...
Click to collapse
Yes, but make sure the phone doesn't reboot in between flashing the ROM and flashing the Masterpatch.
Hi everyone,
Sort of a noob question here. I am aware that the answer is very possibly already hidden somewhere in the numerous posts out there, but im getting kind of lost in all the different posts that are all somehow related to this topic.
So, I want to update my already rooted s4 active (i9295) to the latest version of Android (Lollipop, Android 5.0.*). I found enough information on this and I'm comfortable doing this.
BUT, to my knowledge, updating my rooted phone to the latest version of Android will make me lose root privileges. I haven't found a clear description on how to re-root my phone after updating. Is anyone able to help me out here?
Summary:
-------------------------------------------------------
ℹ Phone: GT-I9295
ℹ Current OS: Android 4.4.2
ℹ Custom Recovery: CWMR
-------------------------------------------------------
Objective:
-------------------------------------------------------
Re-root GT-I9295 after update to Android 5.0.*
Thanks a lot, Thomas
Flash custom recovery with Odin, then flash SuperSU in recovery.
No luck yet....
thanks for your anwser!
unfortunately I cant seem to get a custom recovery flashed through ODIN. I tried both CWM (CWM-Recovery-gt-i9295_v1-2.tar.md5) and TWRP (twrp_mythi_8.tar).
Flashing the official Android udate worked fine, so I am now on android 5.0.1, but I lost root ..... and I dont like that much... I want my root back....:crying:
Dont know if this matters in any way, but when ODIN is done, I dont get a green box that says [PASS], but blue box that says [RESET]
Any advice on getting a custom recovery installed???? Can I install it through ADB?
dtpdesign said:
thanks for your anwser!
unfortunately I cant seem to get a custom recovery flashed through ODIN. I tried both CWM (CWM-Recovery-gt-i9295_v1-2.tar.md5) and TWRP (twrp_mythi_8.tar).
Flashing the official Android udate worked fine, so I am now on android 5.0.1, but I lost root ..... and I dont like that much... I want my root back....:crying:
Dont know if this matters in any way, but when ODIN is done, I dont get a green box that says [PASS], but blue box that says [RESET]
Any advice on getting a custom recovery installed???? Can I install it through ADB?
Click to expand...
Click to collapse
No way I know with adb. Try Heimdall.
http://forum.xda-developers.com/showthread.php?t=2570200
Pkt_Lnt said:
No way I know with adb. Try Heimdall.
http://forum.xda-developers.com/showthread.php?t=2570200
Click to expand...
Click to collapse
Just discovered that I forgot to install the SAMSUNG drivers on my laptop, so just did that and giving ODIN another try. Might check out Heimdall if that doesnt work....
dtpdesign said:
Just discovered that I forgot to install the SAMSUNG drivers on my laptop, so just did that and giving ODIN another try. Might check out Heimdall if that doesnt work....
Click to expand...
Click to collapse
d8389 has given working steps to same question here http://forum.xda-developers.com/showthread.php?p=60376515
Also recommend to read my thread about failsafe method to flash anything (next post). And specific how to get from stock to custom recovery 1st time. Please use Odin 3.0x, multirom TWRP made by spegelius and SuperSU 2.46. The files that you have tried is old and made for jellybean and Kitkat. Most recent links is in my thread.
Thanks for your reply! It was no longer needed for myself, because I already got it to work, but I'm sure it will be helpful for others!
(RESOLVED)
Alright so in order to not bore you all, ill get to the point. I messed up trying to do impossible things with my I537 because I didn't read any forums before trying... stupid I know. That being said I now have a "soft bricked" phone stuck in download mode. I have been looking around (I assume not hard enough) for the right file to flash with ODIN to get me back up and running so I can actually do my research this time before playing with different stock roms.
Can anyone point me in the right direction to get the right files to unbrick this thing?
First things first: this forum is for the SGH-I537 AT&T Galaxy S4 Active, not the I527 Galaxy Mega. I just want to make sure you have the right device. If you have the Mega (I527), you want this forum, and ignore the rest of this post.
If you do in fact have the Galaxy S4 Active (I537), then check out this thread, it has all the official firmware files that have been released for this device. I would recommend using the firmware files for NE3 (KitKat) to flash in Odin. The NE3 build is the easiest to root, and you can always use the keep-root method to upgrade to lollipop if you so desire.
Oh yes sorry that was a mistype. I did indeed mean to type I537. Ok Ill give this a shot and update on how it goes.
Ok so Im currently downloading the Full Odin package, but I have already rooted the phone with towelroot. Is that going to be an issue?
Nah it won't be a problem. Flashing firmware files with Odin will unroot your phone (it resets everything to original factory settings). You can always reroot with towel root again
Ok new problem though, I was able to get everything flashed through ODIN, it restarts; then I get the Samsung boot screen, att boot screen and then it just goes black. I put it back into download mode and tried to re-flash it a couple times but it keeps doing the same thing. Thoughts? This Is the section I got the file from;
I537UCUCNE3 (4.4.2) Released 2014-06-06 - OFFICIAL
Issue has been solved, I just had a battery issue but after changing that and letting the phone charge up it started up great. Thanks for all your help "thisisapoorusernamechoice"
Hi guys, i have an s4 active i9295 with a bootloop, so i decided to flash stock rom via odin as i always did with samsung phones with this problem but every time i flash a rom (i tried different ones) the phone restarts as normal but when the samsung logo appears then it says on the top left with blue letters revocery booting, then it does something with a progress bar and an android logo above and restarts. When it boots again its back at the bootloop, im an absolute noob in this but what i understand is happening is that the phone is reverting the flash i did with odin and i want to know what am i doing wrong, is this supposed to happen? Any help will be much appreciated
Hello,
Welcome to XDA.
To better assist you, your thread will be moved to your device Q&A forum linked below.
http://forum.xda-developers.com/galaxy-s4-active/help
The experts there may be able to help. Good luck.
I need help, its quite an expensive phone to just give up and throw it away
nexware said:
Hi guys, i have an s4 active i9295 with a bootloop, so i decided to flash stock rom via odin as i always did with samsung phones with this problem but every time i flash a rom (i tried different ones) the phone restarts as normal but when the samsung logo appears then it says on the top left with blue letters revocery booting, then it does something with a progress bar and an android logo above and restarts. When it boots again its back at the bootloop, im an absolute noob in this but what i understand is happening is that the phone is reverting the flash i did with odin and i want to know what am i doing wrong, is this supposed to happen? Any help will be much appreciated
Click to expand...
Click to collapse
C'mon guys you may know what is going on with my s4, no matter what i do it bootloops, tried everithing
pit + firmware on odin, still bootloops, wipe data/cache after and before flashing, still bootloops, i researched a lot and tried almost everithing with the same result, please help me, i'll personally bake a cake to the first nice guy to help me get out of the bootloop
nexware said:
C'mon guys you may know what is going on with my s4, no matter what i do it bootloops, tried everithing
pit + firmware on odin, still bootloops, wipe data/cache after and before flashing, still bootloops, i researched a lot and tried almost everithing with the same result, please help me, i'll personally bake a cake to the first nice guy to help me get out of the bootloop
Click to expand...
Click to collapse
I'll try to help you, what did you install or modify that caused the bootloop in the first place? Was your device rooted? Did you have custom recovery? What recovery? Did you have a custom ROM? What ROM?
Droidriven said:
I'll try to help you, what did you install or modify that caused the bootloop in the first place? Was your device rooted? Did you have custom recovery? What recovery? Did you have a custom ROM? What ROM?
Click to expand...
Click to collapse
I received the phone as it is with the bootloop, don't know much of its state before but i was told that it was a bad flashing procedure the cause of the problem. It had stock recoverys from the different roms i flashed in odin: I9295XXUDOB4
I9295XXUCNE5
I9295VJUDOF1
There was one time i managed to make it boot flashing CWM and installing cyanogenmod 12.1 but on restart it kept bootlooping again and i was unable to get it to boot again even repeating exactly the same steps i did before.
I want to make an absolute clean firmware flash with the original rom that this phone came in my country (VJUBMK4) but from what i understand once im on newer versions (im not sure if 4.3 or 5.0) i cant downgrade.
I really don't know what is it causing the bootloop, how can i get the pone to factory firmware? Am i doing something wrong?
nexware said:
I received the phone as it is with the bootloop, don't know much of its state before but i was told that it was a bad flashing procedure the cause of the problem. It had stock recoverys from the different roms i flashed in odin: I9295XXUDOB4
I9295XXUCNE5
I9295VJUDOF1
There was one time i managed to make it boot flashing CWM and installing cyanogenmod 12.1 but on restart it kept bootlooping again and i was unable to get it to boot again even repeating exactly the same steps i did before.
I want to make an absolute clean firmware flash with the original rom that this phone came in my country (VJUBMK4) but from what i understand once im on newer versions (im not sure if 4.3 or 5.0) i cant downgrade.
I really don't know what is it causing the bootloop, how can i get the pone to factory firmware? Am i doing something wrong?
Click to expand...
Click to collapse
Ah, it sounds like you have one of the devices with locked bootloaders then if you can't downgrade, if that is the case you can't use CWM, TWRP, CM or AOSP custom ROMs, those devices have to use Safestrap and modified Stock ROMs. Or you may can unlock the bootloader. I'm not sure that is your problem but you can check it out.
You can flash the newest stock firmware and just be done with it, you may not be able to root and flash custom but the device will at least work.
Sent from my SCH-I535 using Tapatalk
Droidriven said:
Ah, it sounds like you have one of the devices with locked bootloaders then if you can't downgrade, if that is the case you can't use CWM, TWRP, CM or AOSP custom ROMs, those devices have to use Safestrap and modified Stock ROMs. Or you may can unlock the bootloader. I'm not sure that is your problem but you can check it out.
You can flash the newest stock firmware and just be done with it, you may not be able to root and flash custom but the device will at least work.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
How can i be sure that the device has a locked bootloader? If that's the case, what can i do to make it to just work as stock? I need a special kind of stock firmware?
nexware said:
How can i be sure that the device has a locked bootloader? If that's the case, what can i do to make it to just work as stock? I need a special kind of stock firmware?
Click to expand...
Click to collapse
Boot into download mode by holding the volume down + power button and see what is the device name listed there
nexware said:
How can i be sure that the device has a locked bootloader? If that's the case, what can i do to make it to just work as stock? I need a special kind of stock firmware?
Click to expand...
Click to collapse
Take the cover off and pull the battery, the label under the battery should have the model number for the phone.
If the model is GT-i9295, then you have an unlocked bootloader and should be able to flash any firmware.
If the model is SGH-i537, then you have a locked bootloader and can only flash firmware meant for that phone.
Once we know which phone you have we can help you.
JASONRR said:
Boot into download mode by holding the volume down + power button and see what is the device name listed there
Click to expand...
Click to collapse
It says this:
PRODUCT NAME: GT-I9295
CURRENT BINARY: Custom
SYSTEM STATUS: Official
CSB-CONFIG-LSB: 0x30
SECURE DOWNLOAD : ENABLE
WRITE PROTECTION: ENABLE
eMMC BURST MODE enabled
Devo7v said:
Take the cover off and pull the battery, the label under the battery should have the model number for the phone.
If the model is GT-i9295, then you have an unlocked bootloader and should be able to flash any firmware.
If the model is SGH-i537, then you have a locked bootloader and can only flash firmware meant for that phone.
Once we know which phone you have we can help you.
Click to expand...
Click to collapse
Its GT-i9295
Can you flash VJUCNI1 or VJUDOF1?