Hi, I need help with my huawei p9, when I power up and the system start, a screen says Encryption Unsuccessful, and that I should do a factory reset for resume using the phone. I do the cleaning in TWRP and I install fRomFuture - NewWorld V4.1, the installation is performed without errors, but the message remains.
How could resolve this situation?
PS: sorry for my English
I have similar problem
Hi, I have the same thing here, but it has stock recovery, which I can't boot into. I can get to Encryption unsuccessful screen and to fastboot. It is customers phone, he was messing around with SW, and I think he didn't allow oem unlocking, debbugging is disabled aswell I think. I can't flash anything to it, whatever I try I get 'FAILED (remote: command not allowed). Tried force-flashing it via SD card, it gets stuck at Huawei logo. Any thoughts? Or to tell him to use it for smashing nuts?
Related
Hello! I'm needing some help.
My M7 currently will not boot, keeps saying "process system isn't responding". I can access bootloader and stock recovery. It has a LOCKED bootloader. All im wanting is to either flash stock or find a way to unlock the bootloader to flash something that works! I've been attempting to unlock it, have tried multiple drivers. My pc keeps saying the phone "isnt working properly" when i go to the fastboot screen. It shows a yellow traingle next to it in device manager. Oddly i can access the storage of the device when it's attempting to boot up at the htc logo screen. I managed to get the stock rom zip on the device. But the recovery wont flash it, it also says sd read failed in the recovery.
I hope I can get some constructive help on this. I've flashed many phones before usually with external sd. Please let me know any ideas you have. I'm somewhat at a loss.
Also, i received the phone this way, i'm not sure what has or hasn't been done to it.
I think I killed my phone, I have the huawei P9 (EVA-AL00). I unlocked the bootloader and installed TWRP.
I flashed CM12, and different versions or the Huawei OS. at some point I must of broke with phone as now I cannot even get to the huawei built in recovery system. TWRP is gone, I reflashed that but the phone will not shut off to boot into recovery. It will stay at the "your device has been unlocked and cant be trusted" screen and just says your device is booting now... But nothing happens. When I press the power button to shut it off it just does a double vibrate and goes back to the same screen. Any ideas? ADB commands do not seem to work, only fastboot commands work. I tried to flash other roms and I get FAILED (remote: partition length get error) errors when flashing system.img files.
Please help.
jross3r said:
I think I killed my phone, I have the huawei P9 (EVA-AL00). I unlocked the bootloader and installed TWRP.
I flashed CM12, and different versions or the Huawei OS. at some point I must of broke with phone as now I cannot even get to the huawei built in recovery system. TWRP is gone, I reflashed that but the phone will not shut off to boot into recovery. It will stay at the "your device has been unlocked and cant be trusted" screen and just says your device is booting now... But nothing happens. When I press the power button to shut it off it just does a double vibrate and goes back to the same screen. Any ideas? ADB commands do not seem to work, only fastboot commands work. I tried to flash other roms and I get FAILED (remote: partition length get error) errors when flashing system.img files.
Please help.
Click to expand...
Click to collapse
I have had the exact same issue with my Huawei P9 (EVA-L09) and thought my phone is gone for good, but I managed to solve it by force upgrading to the default ROM. Check this thread:
http://forum.xda-developers.com/p9/help/bricked-huawei-p9-t3523003
Hi
So I've been trying to set my P9 Plus back to stock, unless I experienced an unknown error during the flash and I got stuck outside the OS, with the black screen warning me that " the phone is unlocked and it can't be trusted". I tested some other firmware but no luck, also for some reason now I can't even access the TWRP. I'm stuck even outer at the moment, I can access only the white bootloader. I since tried to flash TWRP again, following this guide https://forum.xda-developers.com/p9/how-to/huawei-p9-brick-easiest-to-unbrick-t3662348 for the update extractor, but from adb/fastboot I get the FAILED (remote: Command not allowed) error. Looked for most of the solutionfor this step but none of them worked.
I gave a chance to the HWOTA7 tool, to HiSuite, to automatic update too, no progress at all
What could be the next move?
Thanks a lot for the support
Same
Exactly same issue here. Phone boots (when it wants to) but unresponsive (apps won´t open).
Somehow either partition became read only or partition completely gone.
Micro sd download gyári Rom
Hello everyone, it's my first time writing here, but I’ve tried everything, searched everywhere, and am desperate for help.
I screwed up big time while trying to flash a custom rom on my nem-l21, as I successfully did before with my xiaomi... So what I did:
I managed to unlock bootloader with dc unlocker. Then I got stucked flashing twrp with adb tools. Everything was looking to be fine, no error messages, “flashing successful”… But, I was never able to boot into flashed twrp. Always got stuck on “your phone has been unlocked blah blah. Your device is booting.” It never booted, not in twrp, nor in stock recovery. I tried different versions of twrp from different sources, always same result (flashing successful, booting into recovery not). Booting into the system was fine. And then I made that horrible mistake. Oh, how I wish I didn’t!!
I read on some website, that you are supposed to flash the twrp as boot.img, not as recovery.img. Seemed illogical and stupid to me, but in the end I tried it. Of course, this just bricked my phone, with no possibility to boot. After hours of googling, installing, trying and crying, I managed in the end to flash back stock boot.img. But at that time, I didn’t know my build number (b359), and I flashed boot.img b351. So now I have a phone which boots into the system b359 with boot.img b351, but with lot of errors.
- developer options, security options, display and factory reset option doesn’t work and just crashes. Therefore I am not able to flash the correct boot.img b359 or anything else at all from pc, no way to enable usb debugging and oem unlocking. Adb devices → nothing. I am able to use fastboot (fastboot devices sees the phone), but when try to flash something, I get error “command not allowed”. Also I can’t enable unknown sources installation, which bothers me a lot. And I can’t make factory reset to restore the crashing settings. Also I can’t change display timeout, and original 30 secs is super annoying.
- I am not able to uninstall even apps installed by me, always just restarts system UI and app stays.
What I tried so far:
- flashing correct boot.img from pc, not working because of dev options crashing
- go into recovery, but stock one is overwritten with unfunctioning twrp, always just get stuck on “your phone was unlocked blah blah… your device is booting now”, but it never does, have to hard reboot
- go into huawei erecovery, which is working, but when I try to resolve problem from there, always ends up with errors and crashes
- connect to pc and use HiSuite, system recovery tool here always says “no problem detected”
- updating to b361 through system update settings, always crashes on 5% and sends phone into “your phone was unlocked blah blah… your device is booting now” error
- downloading the proper b359 as and update.app file, put it in dload internal storage → same error during update, put it in dload sdcard → same error, no matter which way I use to start the update
- boot into twrp or stock recovery.img through fastboot without actually flashing it, anyway error “command not allowed”
- do factory reset or update through dial codes (i.e. *#*#123456#*#* …), nothing worked
My pc is windows 10, all drivers up to date. Using powershell as an admin. Am an idiot for not making backup of the phone before I started...
So, now I have more or less functioning phone, but I can’t uninstall any apps at all, can’t install from unknown sources, can’t do nothing from pc, can’t make any update, and lot of important settings keep crashing.
I can use the phone like this, but if somebody could think about some solution for this ****ed up situation I got myself into, I would be grateful to him/her for the rest of my life.
Sorry for a long post.
Thank you in advance and have a nice day
I think using Hisuit will help. Enter Fastboot and connect ur phone to ur computer and use system recovery toll
Hi Guys,
My phone suddenly stuck at this screen since may :
Android Recovery
Xiaomi/jasmine/jasmine_sprout
9/PKQ1.180904.001/V10.0.9.0.PDIMIXM
user/release-keys
Use volume up/down and power.
Can't load Android system. Your data may be corrupt. If you continue to get this message, you may need to perform a factory data reset and erase all user data store on this device.
- Try again
- Factory data reset
If i press try again, sometime it will go to fastboot screen.
I can go into recovery mode here but i not sure which step i should do next.
Reboot system nowreboot to bootloader
apply update from ADB
apply update from sd CARD
wipe data/factory reset
Mount/sstem
view recovery logs
run graphics test
run locale test
power off
I'm not a very tech savvy person, i would really appreciate some help as i have data inside my phone which i need. So if possible i would like to retain the data.
I tried like EDL,fastboot,and flashing none seem to work. Of course I may be doing it wrong.
Can anyone guide me step by step I be happy to give an reward via paypal.
I'm so sorry bro.... 80% of times this means you lost your data.
Is the bootloader unlocked?
blazessdd said:
I'm so sorry bro.... 80% of times this means you lost your data.
Is the bootloader unlocked?
Click to expand...
Click to collapse
Thank you so much for replying.
Nope, but I can do EDL to unlock bootloader, I already disassemble the device a few times.
Just that every time I try to flash it , it give me some error. like Bluetooth error or the version error .
Which I watch thousand of video to work but it's doesn't help. Or maybe I just watched the wrong video
Ok tell me exactly what are you doing and where you have downloaded the rom.
If it's corrupted and you try to flash it you will lose the data... Was debug USB activated on developer settings?
My device died too. After the October update, he never came back. It is looped on the home screen written "Android One".
I've tried several tutorials, it accesses the FastBoot screen, but when trying to use MI Flash appears a Bluetooth error and does not proceed.
I've tried using the adb flashing unlock_critical command, but it fails too.
He didn't have the bootloader unlocked, I now have a large paperweight.:crying:
epilifio said:
My device died too. After the October update, he never came back. It is looped on the home screen written "Android One".
I've tried several tutorials, it accesses the FastBoot screen, but when trying to use MI Flash appears a Bluetooth error and does not proceed.
I've tried using the adb flashing unlock_critical command, but it fails too.
He didn't have the bootloader unlocked, I now have a large paperweight.:crying:
Click to expand...
Click to collapse
You can try to short the edl points so you can flash the ROM again
blazessdd said:
You can try to short the edl points so you can flash the ROM again
Click to expand...
Click to collapse
I already made this attempt, "adb reboot edl" reports the message "error: '(null)' not found
Xiaomi never again