How can i back to Factory ROM TMOBILE? - T-Mobile LG G4

Hi everybody,
I have an LG G4 H811, i installed TWR and a Custom ROM CyanogenMod. Im from Chile [sorry for my english ;( ], and now i need to unlock the phone, to make calls. I have always bought the unlock code through a page, but it seems that this model is through the app tmobile. I need to factory software to unlock by thirds.
Please help!
Sorry for my english, is very poor, i did my best

shakarder said:
Hi everybody,
I have an LG G4 H811, i installed TWR and a Custom ROM CyanogenMod. Im from Chile [sorry for my english ;( ], and now i need to unlock the phone, to make calls. I have always bought the unlock code through a page, but it seems that this model is through the app tmobile. I need to factory software to unlock by thirds.
Please help!
Sorry for my english, is very poor, i did my best
Click to expand...
Click to collapse
what android version you have right now.? you want to flash sotck firmware from tmobile. right
you need a KDZ file and LGUP program. but tell me whats you android version? 10n-20i or 20o?
because there is antiroll back and you need to know wich one you have so you can download correct KDZ file. and not hard brick phone.

raptorddd said:
what android version you have right now.? you want to flash sotck firmware from tmobile. right
you need a KDZ file and LGUP program. but tell me whats you android version? 10n-20i or 20o?
because there is antiroll back and you need to know wich one you have so you can download correct KDZ file. and not hard brick phone.
Click to expand...
Click to collapse
I think the version 20i had before, and then I put a ROM CyanogenMod with TWR recovery. This is what shows the system now:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

shakarder said:
I think the version 20i had before, and then I put a ROM CyanogenMod with TWR recovery. This is what shows the system now:
Click to expand...
Click to collapse
not sure about the unlocking maybe try with Tmobile if not buy the unlock code and yes its expensive..
to go back to stock firmware if you were on 20i
i would say wipe in twrp then go into download mode... make dure you can go into download mode first.
install LGUP phone drivers i assume you have them.
select in LGUP upgrade so KDZ will show up select it. then close the LGUP program , open it now tick the refurbished so this way it wipes everything and press start and let it finish flashing.
heres KDZ 20i and if you read LGUP link
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
if you want latest 20o.. here but once you are on 20o you can not go back to lollipop 10n. or 20i.. youll be stuck there. link of KDZ in bottom if you dont know how to use LGUP search LGUP LG G4..
http://forum.xda-developers.com/tmo...ck-guide-h811-20-o-bootloader-unlock-t3421589

I can install "LG-H81120i-Flashable.COMPLETE.zip" directly with the TWR, clicking on install, select the .ZIP, and reboot? The other form of LG Up do not know. "Download Mode" not know what that is.

raptorddd said:
not sure about the unlocking maybe try with Tmobile if not buy the unlock code and yes its expensive..
to go back to stock firmware if you were on 20i
i would say wipe in twrp then go into download mode... make dure you can go into download mode first.
install LGUP phone drivers i assume you have them.
select in LGUP upgrade so KDZ will show up select it. then close the LGUP program , open it now tick the refurbished so this way it wipes everything and press start and let it finish flashing.
heres KDZ 20i and if you read LGUP link
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
if you want latest 20o.. here but once you are on 20o you can not go back to lollipop 10n. or 20i.. youll be stuck there. link of KDZ in bottom if you dont know how to use LGUP search LGUP LG G4..
http://forum.xda-developers.com/tmo...ck-guide-h811-20-o-bootloader-unlock-t3421589
Click to expand...
Click to collapse
Done!! I have again Tmobile Stock ROM. Thank you man!! Now i have H81120i
Thank you. Now im going to buy the Unlock Code xD!! because my device is not eligible for unlock.
Thank you again

shakarder said:
Done!! I have again Tmobile Stock ROM. Thank you man!! Now i have H81120i
Thank you. Now im going to buy the Unlock Code xD!! because my device is not eligible for unlock.
Thank you again
Click to expand...
Click to collapse
am glad i could help, good luck with the unlock thingy.. :good:

Related

X8 not Repairing with PCC & SEUS

Hello everybody,
My x8 has unlocked bootloader. Manufactured 11w14. I have flashed back to the Stock kernel, Stock Rom 2.1.1.A.0.6 . But I want fresh stock rom with locked bootloader because I have to sell it.
Now the problem is that neither PCC nor SEUS working for me.
PCC always on downloading since 14 hrs and SEUS says alredy updated and no option for repairing in bottom right corner.
What should I do..? I want to use SEUS. please help me.
Bravia4X8 said:
Hello everybody,
My x8 has unlocked bootloader. Manufactured 11w14. I have flashed back to the Stock kernel, Stock Rom 2.1.1.A.0.6 . But I want to fresh stock rom with relock because I have to sell it.
Now the problem is that neither PCC nor SEUS working for me.
PCC always on downloading since 14 hrs and SEUS says alredy updated and no option for repairing in bottom right corner.
What should I do..? I want to use SEUS. please help me.
Click to expand...
Click to collapse
Just use flashtool. Either install the 2.1 firmware then flash the 015 baseband or install the 1.6 firmware then update with PCC.
Sent from my X8 using xda premium
I also used this with flashtool and flashed 2.1 update but nothing. Is there anyway to use SEUS again. In past time I used this for X8 and it regularly worked for me.
EDIT: I already have 015 baseband
Bravia4X8 said:
I also used this with flashtool and flashed 2.1 update but nothing.
EDIT: I already have 015 baseband
Click to expand...
Click to collapse
Mind to share your thoughts about what problem you have with Flashtool?
B.Jay said:
Mind to share your thoughts about what problem you have with Flashtool?
Click to expand...
Click to collapse
Master B.JAY, there is no problem with Flashtool, the problem is with SEUS and PCC as I can't repair my device using these.
As I am saying in 1st post, I have to sell X8. So, I want to relock its bootloader and Stock rom with SEUS but SEUS don't show repair button after the bootloader unlocked.
Even I have Flashed both Stock ROM and KERNEL with flashtool. But how to relock it??????
Bravia4X8 said:
Even I have Flashed both Stock ROM and KERNEL with flashtool. But how to relock it??????
Click to expand...
Click to collapse
Ah, my Padawan ... much things to learn you have ...
If you already flashed back to Stock Baseband then all you have to do is to re-lock the boot loader with s1tool ...
1. Hit up the [Guide] Bootloader and kernel guide | X8 | W8 | X10 mini | X10 mini pro thread
2. Press CTRL+F in your browser and search for "HOW TO RELOCK BOOTLOADER"
3. Follow the instructions of that section to re-lock the boot loader.
May the force be strong with you, youngling.
I followed the Procedure , but in s1tool there is no option for relocking bootloader. How to re-lock???
sorry if its over..but I need help only from you as you are more sincere in my mind.
Let me sum it up for you ...
HOW TO RELOCK BOOTLOADER :
Flash back stock kernel using "Repair" option in SEUS or by using Flashtool (if using Flashtool either flash stock firmware or flash the appropiate .ftf file below):
X8 (E15) and W8 stock kernel:
Download link: http://www.mediafire.com/?zb3zhdkodgy55ch#1
Direct download link: http://db.tt/NI2WBnUp
(According to you, you already did that step and flashed back to Stock ROM and Stock Baseband/Kernel)
Download S1tool and extract it to an appropiate location on your PC (not needed if you already have s1tool) . (Credits go to the_laser for this tool)
S1tool post: http://forum.xda-developers.com/showpost.php?p=17374120&postcount=26
Direct download link: http://db.tt/OrOQO33
Turn off your phone.
Launch s1tool.exe in the folder you extracted s1tool to.
Click on Restore button and then connect your phone to the PC in flash mode (press and hold back button while connecting your phone to the PC).
Wait for the process to complete. Congratulations! You now have relocked your bootloader!
I just left out the parts where you would flash back Stock with Flashtool and where you would install the gordon's gate driver.
Now, where's the problem?
You unable to read to follow a simple instruction from above to go to the thread, search for the RE-LOCK section and do as written?
EDIT: Is my mood now serious enough for you?
i use fleshtool to repair my x8
B.Jay said:
Let me sum it up for you ...
Launch s1tool.exe in the folder you extracted s1tool to.
Click on Restore button and then connect your phone to the PC in flash mode (press and hold back button while connecting your phone to the PC).
Wait for the process to complete. Congratulations! You now have relocked your bootloader!
Click to expand...
Click to collapse
I cut the portion from your reply...and look at the bold fonts.....this mean here is problem with me...There is no restore button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Use the attached s1tool
Definitely not my fault if morons can't link to the right version of the tool (isn't it great I keep this stuff archived to have it at hand?).
previous was that as in this post
http://forum.xda-developers.com/showpost.php?p=22380402&postcount=10
See two posts up ... there's a RESTORE button!
Yes, In your s1tool there is restore button.
I used a ****ty s1tool. Now with yours perfectly relocked.
That "****ty" expression is definitely worth a "Thanks"...
Anyhow... WOOT!
Now you can sell your X8 like it once shipped.
You are right...and Sorry for my Word..

help please, i need help

I intent flash ics in my att vivid, but my phone bricked, then i want to back stock, i download ruu cingular, and when run the ruu say error 140 eroor bootloader. i need help please you sorry my english i dont speak and write well... i wait for your help.. tks...
I had the same problem. Error 140 means there's a corruption in the a cards data structure.
Did you unlock your bootloader?
Pm me with what you have done so far. I'll help as much as I can, but be forewarned you may need to replace your device regardless.
Sent from my HTC PH39100 using xda premium
discobritanics said:
I intent flash ics in my att vivid, but my phone bricked, then i want to back stock, i download ruu cingular, and when run the ruu say error 140 eroor bootloader. i need help please you sorry my english i dont speak and write well... i wait for your help.. tks...
Click to expand...
Click to collapse
When you run the ruu, you must re-lock your bootloader. Have you locked your bootloader?
Go to this thread, they have the tool you need to fix your phone:
http://forum.xda-developers.com/showthread.php?t=1498003
Hope it helps! Good Luck
you say it's bricked, but yet it goes into bootloader you can flash ruu?
i think you maybe misspoke, what happened exactly? can you show pictures?
error 140 bootloader version error is simple, it means that the main version is newer than the one you are trying to flash. since you flashed ics ruu, you cannot go back to gb ruu. you have to follow the guide here by thecubed
http://forum.xda-developers.com/showthread.php?t=1529669
if u can take pics first and show me what your phone is doing before you do anything else that will be better
Please don't make two separate threads in two different sections asking for the exact same thing.
Sent from my HTC PH39100 using xda premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mod plz move to gen
ebaul said:
When you run the ruu, you must re-lock your bootloader. Have you locked your bootloader?
Go to this thread, they have the tool you need to fix your phone:
http://forum.xda-developers.com/showthread.php?t=1498003
Hope it helps! Good Luck
Click to expand...
Click to collapse
IIRC, you have to be able to boot the phone to get this method to work?
I'm having a similar problem and I tried the file from http://forum.xda-developers.com/showthread.php?t=1529669 to no avail, it doesn't say an error code it just reboots and goes black after HTC boot screen.
I think my problem started when I tried to flash the OTA from androidninjas; he put the ICS hboot on top and I was too excited to read so I d/l and flash the file (was named PH39IMG...) but when I went to boot it turned black. So I d/l and flash the new file, after using HBOOT to clear out the phone etc. Still no luck. And I've tried numerous GB ruu's as well as every ICS one I can find. Brick?
Definitely interested to hear the fix to this.
Before flashing ICS, did you relock your Hboot & were you running GB?
If your screen went dark, but can still get into hboot, you are fine. Just need a recovery. There is an error with the older standard CWM. So you need to install a new version of recovery.
GSLEON3 said:
Before flashing ICS, did you relock your Hboot & were you running GB?
If your screen went dark, but can still get into hboot, you are fine. Just need a recovery. There is an error with the older standard CWM. So you need to install a new version of recovery.
Click to expand...
Click to collapse
Yes to both and I thought relocking got rid of root? So I was afraid I wouldn't be able to flash a custom rom.
Moved to General sub section, please pay attention where you open a thread next time
htc vivid
My phone is similar, I unlocked and all, i got stuck booting...i relocked the phone,i loaded the PH39IMG.zip onto a sd card and booted from it, it says checking the image, next thing it does is update fail main version is older. any help would be appreciated
quepasakimosabe said:
My phone is similar, I unlocked and all, i got stuck booting...i relocked the phone,i loaded the PH39IMG.zip onto a sd card and booted from it, it says checking the image, next thing it does is update fail main version is older. any help would be appreciated
Click to expand...
Click to collapse
if it's locked..just boot to fastboot, plug the phone into your computer, and run the latest ruu. Then unlock

[Q] From 5.0.2 to 4.4.4 with backup

Hello,
I have a questiom in terms of downgrade to 4.4.4 I have a moto g 2014 with unlocked bootloader and root acces back in 4.4.4. I did a backup too. Since I update to 5.0.2 my root acces is gone and I tried to Backup my 4.4.4 but I failed after 60-70%, what did I wrong?
Please I need a answer I can´t stick with lolipop anymore!!
What exactly do you try to do? Backup ROM or restore previously created kk backup
Sent from my XT1068 using XDA Free mobile app
alecander said:
Please I need a answer I can´t stick with lolipop anymore!!
Click to expand...
Click to collapse
what was your 4.4.4 version
and what are you on now?
reefuge said:
what was your 4.4.4 version
and what are you on now?
Click to expand...
Click to collapse
I had a stock 4.4.4 android version and now I have a stock 5.0.2 lolipop version, sorry if I could not answer your question
I found it now KXB21.85-14
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL][/IMG]
Tonal4Nagual said:
What exactly do you try to do? Backup ROM or restore previously created kk backup
Sent from my XT1068 using XDA Free mobile app
Click to expand...
Click to collapse
I don´t know exactly I just want to stock 4.4.4
As I rooted my phone I did a backup fom 4.4.4 now I have 5.0.2 and I wanted to restore it to 4.4.4 via the backup but it failed
alecander said:
I had a stock 4.4.4 android version and now I have a stock 5.0.2 lolipop version, sorry if I could not answer your question
I found it now KXB21.85-14
[/URL][/IMG]
I don´t know exactly I just want to stock 4.4.4
As I rooted my phone I did a backup fom 4.4.4 now I have 5.0.2 and I wanted to restore it to 4.4.4 via the backup but it failed
Click to expand...
Click to collapse
ok that a start you where on kitkat .14 and now on lollipop 5.0.2 .28 yes its possible to downgrade, just need a little more info
what model is your moto g 2nd gen?
is it a xt1068 dual sim?
if you can post a screen shot of your about phone info from setting (if phone boot) I will point you to correct firmware
im need to know the SYSTEN VERSION i.e --- 22.xx.xx RetailDSDS.retdsdsALL.en.03 reteu ---
alecander said:
I had a stock 4.4.4 android version and now I have a stock 5.0.2 lolipop version, sorry if I could not answer your question
I found it now KXB21.85-14
[/URL][/IMG]
I don´t know exactly I just want to stock 4.4.4
As I rooted my phone I did a backup fom 4.4.4 now I have 5.0.2 and I wanted to restore it to 4.4.4 via the backup but it failed
Click to expand...
Click to collapse
Ok , did you wipe all except sd card before restoring ? On which recovery you are ?
Sent from my XT1068 using XDA Free mobile app
reefuge said:
ok that a start you where on kitkat .14 and now on lollipop 5.0.2 .28 yes its possible to downgrade, just need a little more info
what model is your moto g 2nd gen?
is it a xt1068 dual sim?
if you can post a screen shot of your about phone info from setting (if phone boot) I will point you to correct firmware
im need to know the SYSTEN VERSION i.e --- 22.xx.xx RetailDSDS.retdsdsALL.en.03 reteu ---
Click to expand...
Click to collapse
Yes you are right, its a dual Sim version
[/URL][/IMG]
Tonal4Nagual said:
Ok , did you wipe all except sd card before restoring ? On which recovery you are ?
Sent from my XT1068 using XDA Free mobile app
Click to expand...
Click to collapse
No I didn´t wipe anything
I on TWRP v.2.7.1.1
alecander said:
No I didn´t wipe anything
I on TWRP v.2.7.1.1
Click to expand...
Click to collapse
yes xt1068
1st try to enter twrp and wipe all except external sdcard and try to restore your back up - if this fails you will need to do a full flash of firmware
latest twrp is 2.8.4.0 though, may be why having trouble - if your TWRP fails again do this
click the green 4.4.4 easy installer in my signature
firmware A is your original kitkat
B and C will also work (newer versions)
ALL instruction, drivers, files and firmware are in the zip
read instructions TWICE and the try it out
reefuge said:
yes xt1068
1st try to enter twrp and wipe all except external sdcard and try to restore your back up - if this fails you will need to do a full flash of firmware
latest twrp is 2.8.4.0 though, may be why having trouble - if your TWRP fails again do this
click the green 4.4.4 easy installer in my signature
firmware A is your original kitkat
B and C will also work (newer versions)
ALL instruction, drivers, files and firmware are in the zip
read instructions TWICE and the try it out
Click to expand...
Click to collapse
YES IT WORKED
But unfortunately not via twrp, that annoys me, why even did a backup when its not working anyway?
But thank you for your great tutorial!
But now I have three other questions.
1.How I update twrp to v2.8.4.0 ?
2.How do I root my moto g? Again via pc and coding?
Is there a easier method?
3. How can I prevent the "Update to Android 5.0.2" screen?
alecander said:
YES IT WORKED
But unfortunately not via twrp, that annoys me, why even did a backup when its not working anyway?
But thank you for your great tutorial!
But now I have three other questions.
1.How I update twrp to v2.8.4.0 ?
2.How do I root my moto g? Again via pc and coding?
Is there a easier method?
3. How can I prevent the "Update to Android 5.0.2" screen?
Click to expand...
Click to collapse
probably old twrp
https://mega.co.nz/#!mgUyCb5R!q-fGuAQx14BM5fr-qNASigKSt5vmEPx-lTaxFoAh-x4twrp 2.8.4.0 via Ap fastboot flash mode
search for chainfires auto root remeber su latest is 2.45
maybe download but dont install or have a search .....
reefuge said:
probably old twrp
https://mega.co.nz/#!mgUyCb5R!q-fGuAQx14BM5fr-qNASigKSt5vmEPx-lTaxFoAh-x4twrp 2.8.4.0 via Ap fastboot flash mode
search for chainfires auto root remeber su latest is 2.45
maybe download but dont install or have a search .....
Click to expand...
Click to collapse
I don´t know why but after I update twrp there was a message that I don´t have root rights and if I would have it. I clicked yes and voala I have now root on my phone. Thank you, you are a magican!
alecander said:
I don´t know why but after I update twrp there was a message that I don´t have root rights and if I would have it. I clicked yes and voala I have now root on my phone. Thank you, you are a magican!
Click to expand...
Click to collapse
just to let you know TWRP 2.8.5.0 is now out
reefuge said:
just to let you know TWRP 2.8.5.0 is now out
Click to expand...
Click to collapse
Thanks I google it but I can´t find any news or download link for it
And please can you say how can I block the pup up update to 5.0.2 screen?
alecander said:
Thanks I google it but I can´t find any news or download link for it
And please can you say how can I block the pup up update to 5.0.2 screen?
Click to expand...
Click to collapse
https://mega.co.nz/#!Dx03wTbD!3sDFubGomhegQqdoGzNb1RWnQwApzyaTlVq69uX1TqkTWRP 2.8.5.0
no idea download it maybe if not google may have answer

Re-locked Bootloader and now facing problems

Hi there this is my first post so excuse me if i'm unclear about stuff. if you need any info just gimme a shout and i can find it for you!
I have an M7 on O2 (UK), I've had it pretty much since it release in 2013.
Upon getting the phone i immediately rooted whilst on Android Version 4.4.3, it's the Sense Version too (i don't know if that's relevant or not).
Anyway it's been a while since this, and i've lost a lot of the knowledge i had on Android & Rooting etc.
I'm looking to un-root my phone to get the OTA Updates which have been alerting my (very annoying) since 2013!
Last week i began watching tutorials and reading up, a few days in and i gave it my first attempt..
I first re-locked my Bootloader successfully and then tried using the RUU Software but was unlucky with numerous versions (i'm still unsure about how to find the RIGHT one). After hours & hours i was at and end and couldnt seem to find the right one for my phone and i gave up.
Since "re-locking" my Bootloader i've been facing an issue where every time i power up or restart my phone it boots in the Bootloader's Fastboot mode, from here i have to navigate to 'reboot'... the phone then restarts and this time round i get my usual home screen.
I'm unsure as to what direction to go now as i'm scared i will brick my phone, i guess i have 2 options;
A. Continue to try and return to stock and then decide if i wish to re-root (probably not)
B. Unlock the Bootloader once again (only this will wipe my phone, and i can't find the original stock rom thus leading to a brick i expect?)
Hope someone can help, any questions please do not hesitate to ask!
gemodubz said:
Hi there this is my first post so excuse me if i'm unclear about stuff. if you need any info just gimme a shout and i can find it for you!
I have an M7 on O2 (UK), I've had it pretty much since it release in 2013.
Upon getting the phone i immediately rooted whilst on Android Version 4.4.3, it's the Sense Version too (i don't know if that's relevant or not).
Anyway it's been a while since this, and i've lost a lot of the knowledge i had on Android & Rooting etc.
I'm looking to un-root my phone to get the OTA Updates which have been alerting my (very annoying) since 2013!
Last week i began watching tutorials and reading up, a few days in and i gave it my first attempt..
I first re-locked my Bootloader successfully and then tried using the RUU Software but was unlucky with numerous versions (i'm still unsure about how to find the RIGHT one). After hours & hours i was at and end and couldnt seem to find the right one for my phone and i gave up.
Since "re-locking" my Bootloader i've been facing an issue where every time i power up or restart my phone it boots in the Bootloader's Fastboot mode, from here i have to navigate to 'reboot'... the phone then restarts and this time round i get my usual home screen.
I'm unsure as to what direction to go now as i'm scared i will brick my phone, i guess i have 2 options;
A. Continue to try and return to stock and then decide if i wish to re-root (probably not)
B. Unlock the Bootloader once again (only this will wipe my phone, and i can't find the original stock rom thus leading to a brick i expect?)
Hope someone can help, any questions please do not hesitate to ask!
you can also contact me here [email protected]
Click to expand...
Click to collapse
Post the output of "fastboot getvar all" (hide your imei and sn)
alray said:
Post the output of "fastboot getvar all" (hide your imei and sn)
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
gemodubz said:
Click to expand...
Click to collapse
If you want to return to stock, you can use the 7.18.206.51 ruu (its the latest version for your phone)
Instructions as post #1, ruu at post #2:
http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
Once the RUU flashed you can unlock the bootloader again and re-root. Be sure to use the latest version of supersu.
alray said:
If you want to return to stock, you can use the 7.18.206.51 ruu (its the latest version for your phone)
Instructions as post #1, ruu at post #2:
http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
Once the RUU flashed you can unlock the bootloader again and re-root. Be sure to use the latest version of supersu.
Click to expand...
Click to collapse
Thanks a bunch man! Please could you tell me how you found the specific RUU for my phone?
Please could you tell me the method you used to locate the RUU as i had so much trouble before, i was wondering if there is an easy way find the correct RUU (by looking for certain codes etc) ?
alray said:
If you want to return to stock, you can use the 7.18.206.51 ruu (its the latest version for your phone)
Instructions as post #1, ruu at post #2:
http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
Once the RUU flashed you can unlock the bootloader again and re-root. Be sure to use the latest version of supersu.
Click to expand...
Click to collapse
won't unlocking the bootloader after flashing RUU just wipe the phone again?
gemodubz said:
won't unlocking the bootloader after flashing RUU just wipe the phone again?
Click to expand...
Click to collapse
Unlocking will wipe user data only.
Sent from my HTC One using XDA Labs
alray said:
Unlocking will wipe user data only.
Sent from my HTC One using XDA Labs
Click to expand...
Click to collapse
So would that be my media files like photos, music, apps etc?
gemodubz said:
So would that be my media files like photos, music, apps etc?
Click to expand...
Click to collapse
Exactly
Sent from my HTC One using XDA Labs

Network Stopped Working - Need Help!

First of all, i have a bootloader locked XT1254 with SU4TL49 firmware. I use Nova Launcher and was just looking through Nova Shortcuts hoping to make a GSM/UMTS switch on my home screen. I came across BandMode under Settings, and accidentally clicked USA Band. After that my SIM couldnt find any network, i tried everything: Clicked USA Band, Cellular, changed network mode to Global and back to LTE / GSM / UMTS. I even tried everything in the hidden Phone Menu (RadioInfo). After nothing worked i tried Factory reset twice, but still the same.
The phone detects the SIM and shows the SIM contacts too, but cant find any network operators. I know the last thing to try is updating firmware to Marshmallow, but that would also close the window for bootloader unlock if i later need to repair the firmware through custom recovery.
Any help would be greatly appreciated. Screenshots on how to kill the Network and also get to hidden Phone Menu are attached.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
killerxda said:
First of all, i have a bootloader locked XT1254 with SU4TL49 firmware.
I know the last thing to try is updating firmware to Marshmallow, but that would also close the window for bootloader unlock if i later need to repair the firmware through custom recovery.
Click to expand...
Click to collapse
So, go ahead and unlock your bootloader right now. What are you waiting for? You still have Wi-Fi, right?
By the way, Sunshine works with Marshmallow now -- just not the most recent Marshmallow (MCG24.251-5-5, earlier this week). You can re-flash Su4TL-49 firmware or the first Marshmallow image, MCG24.251-5.
[FXZ] Official Stock Firmware 6.0.1 MCG24.251-5
https://forum.xda-developers.com/dr...official-stock-firmware-6-0-1-mcg24-t3531571\
Besides unlocking your bootloader, the first thing you can do is try to re-flash your Lolllipop radio:
firstEncounter said:
Instructions for using fastboot packages:
Code:
mfastboot flash radio radio.img
5.1 (SU4TL-49)
Fastboot package (Mirror)
SHA1 sum: a297a5fd84f906cdfacf4efb8c656babbfe2452f
Click to expand...
Click to collapse
If that doesn't work, then re-flash the entire SU4TL-49 firmware or flash the first Marshmallow image above. But go ahead and unlock your bootloader!
ChazzMatt said:
Besides unlocking your bootloader, the first thing you can do is try to re-flash your Lolllipop radio:
If that doesn't work, then re-flash the entire SU4TL-49 firmware or flash the first Marshmallow image above. But go ahead and unlock your bootloader!
Click to expand...
Click to collapse
Before your reply here i got to the radio thread and tried flashing SU4TL49 radio. BUT what i did was flash all 3 files (radio, GPT, bootloader) as instructed in that thread. Next thing i know my baseband is Unknown and no IMEI is being shown now..... The problems seem to be stacking up.
Was some file not compatible? Do i flash any files from SU4TL44 zip now?
EDIT: FINALLY!! After flashing GPT and Bootloader of SU4TL49 i flashed radio from SU4TL44 and the command fastboot oem config fsg-id ""
Everything back to normal now! :good: :highfive: :laugh: :victory:
Thanks to your reply on the other thread about 2G not working i found out about radio flashing possibility otherwise i was thinking nothing is possible on a locked bootloader :highfive:
Now go unlock your bootloader.
ChazzMatt said:
Now go unlock your bootloader.
Click to expand...
Click to collapse
Haha i think i'll just sell it soon and buy some other

Categories

Resources