Related
I failed similar times to root my phone with twrp 3.2.xx and 3.1.xx. I used Odin 3 v3.13.1.
Any ideas or thread links for the young padawan?
I appreciate your advice masters :good:
Using Odin Flash TWRP latest from the note 8 TWRP thread here on XDA, one on their site is not latest.
Install magisk manager app from play store.
Download magisk from the app.
Reboot to TWRP and flash the magisk file just downloaded.
Reboot and check magisk manager for root and hide.
Should be good.
Nope. Not working and still ends in a bootloop and it's unable to mount the internal storage.
Something went wrong, so.. my phone is unable to boot the system after that!
The issue is the version of TWRP and Oreo, its not yet compatible on this device, it needs porting over
If you want MAGISK you need to do it all in one hit.
Flash TWRP
Select Read Only Option.
Format Data
Reboot Recovery
Flash the DM Verify Encrypt file
Reboot Recovery, You could be able to flash files wihtout a Data mount error.
Now flash the files you want, i..e MAGISK
Once you have booted the ROM and return back to TWRP you are unable to mount Data.
This can cause various issue when flashing files
Funny you.. How can I format if the internal storage isn't able to mount?
"Select Read Only Option.
Format Data" <-- seems like a contradiction to format a missing
partition.
I think we need to wait until someone will port the twrp for Oreo. cheerio!
Because it needs to be done when you first flash it.
Once you have flash Oreo, Then TWRP, You boot into TWRP and format. You then Flash the DM Verify.
Data is accessible, its empty but accessible, Flashing any files like MAGISK work without any errors.
I have it all working on mine without any issues, I do know if i need to flash any additional files it wont work properly due to Data no longer mountable.
There is a updated version of TWRP that fixes this, but its not been ported over.
If you had problems (like myself) with installing custom roms via twrp where the system would stuck in a bootloop and the recovery would return "No OS Installed" error, here's the solution to how to fix it:
1. Enter TWRP
2. Go to Wipe - Format Data
3. Restart recovery
4. Copy the rom to internal storage and install custom rom
Enjoy!
vulgaran said:
If you had problems (like myself) with installing custom roms via twrp where the system would stuck in a bootloop and the recovery would return "No OS Installed" error, here's the solution to how to fix it:
1. Enter TWRP
2. Go to Wipe - Format Data
3. Restart recovery
4. Copy the rom to sd card and install custom rom
Enjoy!
Click to expand...
Click to collapse
Thanks for the useful info. :highfive:
evanB70 said:
Thanks for the useful info. :highfive:
Click to expand...
Click to collapse
Whoops, forgot it doesn't have the sd card slot I've edited the first post.
Apparently, when you change rom type (for example, from official stable to xiaomi.eu weekly), you have to do this complete device wipe. For updating to a new version only wiping dalvik and cache should do.
not work on me
Thanks but didn't work for me either. After following your instructions, the phone booted into TWRP again. It no longer says there's no OS, but it won't boot. Just stalls into boot animation for a while and then goes into twrp recovery... Bummer!
Hello, help would be amazing as this is my 2nd day trying to root my xPeria XZ Premium!
I've finally flashed twrp , I'm trying to install this rom:
https://forum.xda-developers.com/xz-premium/development/kernel-sony-xz-premium-5-2018-t3784669
But I'm getting stuck when trying to install magisk, OR move any zip files from my SD card to my Internal Storage.
Could anyone guide me through how to resolve this? :crying:
Have unlocked boot loader?
Need to format data first
xStatiZx said:
Hello, help would be amazing as this is my 2nd day trying to root my xPeria XZ Premium!
I've finally flashed twrp , I'm trying to install this rom:
https://forum.xda-developers.com/xz-premium/development/kernel-sony-xz-premium-5-2018-t3784669
But I'm getting stuck when trying to install magisk, OR move any zip files from my SD card to my Internal Storage.
Could anyone guide me through how to resolve this? :crying:
Click to expand...
Click to collapse
Hey my dude follow these steps, in twrp select wipe->format data (You'll lose all your files) now try flash the rom, you should find a custom kernel for your device as well and install it after the rom. If the Kernel doesnt install magisk now would be a good time to do it :highfive:
Matthewwwww1998 said:
Hey my dude follow these steps, in twrp select wipe->format data (You'll lose all your files) now try flash the rom, you should find a custom kernel for your device as well and install it after the rom. If the Kernel doesnt install magisk now would be a good time to do it :highfive:
Click to expand...
Click to collapse
This isn't necessary. Just extract boot.img from whatever rom.zip you're using, flash that in recovery, reboot to recovery again and magisk should install.
murph187 said:
This isn't necessary. Just extract boot.img from whatever rom.zip you're using, flash that in recovery, reboot to recovery again and magisk should install.
Click to expand...
Click to collapse
You're a GOD. Thank You!!!!!
updater process ended with error: 1
I was able to install magisk but after that if i try to install nethunter I get this same error. I am using redmi 4(santoni). have installed lineage OS 15.1
Can someone please help me?
logs
I had similar error shown below while installing a custom ROM:
Error applying update: 7 (ErrorCode:: kInstallDeviceOpenError )Updater process ended with ERROR: 1 Error installing zip file
Solved by using slightly older version of TWRP
i try and didnt work how to extract boot image in steps ??
magicstep said:
I had similar error shown below while installing a custom ROM:
Error applying update: 7 (ErrorCode:: kInstallDeviceOpenError )Updater process ended with ERROR: 1 Error installing zip file
Solved by using slightly older version of TWRP
Click to expand...
Click to collapse
which version you use
murph187 said:
This isn't necessary. Just extract boot.img from whatever rom.zip you're using, flash that in recovery, reboot to recovery again and magisk should install.
Click to expand...
Click to collapse
Hi, which option may i have to choose? there are 4 options
magicstep said:
I had similar error shown below while installing a custom ROM:
Error applying update: 7 (ErrorCode:: kInstallDeviceOpenError )Updater process ended with ERROR: 1 Error installing zip file
Solved by using slightly older version of TWRP
Click to expand...
Click to collapse
3.2.2 worked for me.
In my case unmounting all the partitions fixed it for me, the boot.img method didn't work.
magicstep said:
I had similar error shown below while installing a custom ROM:
Error applying update: 7 (ErrorCode:: kInstallDeviceOpenError )Updater process ended with ERROR: 1 Error installing zip file
Solved by using slightly older version of TWRP
Click to expand...
Click to collapse
I had flashed new version on firmware but forgot to update TWRP recovery that is why I was getting this error. I updated TWRP recovery. also flashed boot.img image then I was able to fix this issue.
guys please help me i have xiaomi mi a2 lite whit twrp 3.5.0_9 installed and unlocked bootloader i downloaded android 11 rom link: https://forum.xda-developers.com/t/rom-11-0-daisy-aosp-11-0.4167961/. When i go to recovery mode i flash the rom and appears this error: Updater process ended whit error: 1 to flash additional zips please reboot recovery to switch to the updated slots. Error installing zip file rom.zip. please help me.
THANKS
samyxy said:
guys please help me i have xiaomi mi a2 lite whit twrp 3.5.0_9 installed and unlocked bootloader i downloaded android 11 rom link: https://forum.xda-developers.com/t/rom-11-0-daisy-aosp-11-0.4167961/. When i go to recovery mode i flash the rom and appears this error: Updater process ended whit error: 1 to flash additional zips please reboot recovery to switch to the updated slots. Error installing zip file rom.zip. please help me.
THANKS
Click to expand...
Click to collapse
I was having the same issue... After hours of research I finely managed to fix it. Try the following:
1 - Install TWRP (I also had the 3.5.0_9 version).
2 - Format data and wipe all the advanced options possible.
3 - Download the program "payload_dumper-win64".
3.1 - Following the payload dumper instructions, I've copied the payload.bin from my custom ROM to the payload_input folder.
3.2 - Execute payload_dumper.exe and wait, a lot!
3.3 - Copy the resulted files (boot.img, system.img, vendor.img) in to the phone.
4 - In TWRP, go to install, select from images, and, one by one, install the images you've just copied.
4.1 - Note that during the install process, you will have to select the correct "slots" to flash the images. In my case, there where to options for system and vendor. I've chosen the "System Image" and "Vendor Image" option.
5 - Restart.
That's it! I didn't had to change slots nor wipe data after the installation... I don't know if this was the correct approach, but after many tries this is what worked for me
Sorry about my bad english...
Sometimes it is caused due to corrupted file. While transferring file through MTP it is likely to corrupt large files. I had the same problem. Then I tried copying file while in TWRP (sure it is also MTP) and it worked.
PendiukG said:
I was having the same issue... After hours of research I finely managed to fix it. Try the following:
1 - Install TWRP (I also had the 3.5.0_9 version).
2 - Format data and wipe all the advanced options possible.
3 - Download the program "payload_dumper-win64".
3.1 - Following the payload dumper instructions, I've copied the payload.bin from my custom ROM to the payload_input folder.
3.2 - Execute payload_dumper.exe and wait, a lot!
3.3 - Copy the resulted files (boot.img, system.img, vendor.img) in to the phone.
4 - In TWRP, go to install, select from images, and, one by one, install the images you've just copied.
4.1 - Note that during the install process, you will have to select the correct "slots" to flash the images. In my case, there where to options for system and vendor. I've chosen the "System Image" and "Vendor Image" option.
5 - Restart.
That's it! I didn't had to change slots nor wipe data after the installation... I don't know if this was the correct approach, but after many tries this is what worked for me
Sorry about my bad english...
Click to expand...
Click to collapse
It's legit procedure. Also you don't need to manage slots here, caz recovery automatically does that for you.
Hello guys, i'm from Russia, sorry for my bad English. I using Poco X3 Pro, and i have some troubles. I wanted to install custom firmware. First ROM
delivered successfully, unlike the second. After clearing all sections except sd cart and otg, I tried to install the original MIUI build, but it didn't work. I downloaded the original MIUI, but still. When installing, it says: "Update process ended with ERROR: 1" The methods from the top didn't help, please help!
Sushanthn94 said:
updater process ended with error: 1
I was able to install magisk but after that if i try to install nethunter I get this same error. I am using redmi 4(santoni). have installed lineage OS 15.1
Can someone please help me?
logs
Click to expand...
Click to collapse
Kali Nethunter on redmi 4x (santoni) is updated here:
Releases · Neternels/android_kernel_xiaomi_msm8937
Redmi 4X (santoni) NetHunter Kernel. Contribute to Neternels/android_kernel_xiaomi_msm8937 development by creating an account on GitHub.
github.com
Follow it and flash firmwares (if needed).
Steps to install Treble ROMs on Galaxy J7 Prime.
Prerequisite:
1. Flash TWRP recovery. For Treble Project I suggest version 3.2.1 here because there is an issue about mounting /preload partition with 3.2.3+. You can try newer versions for your choices. If you see /preload error, Some suggested to ignore this error.
2. For emergency, please download Stock ROM here. If you accidentally mess up your partitions or consistently bricks, Stock ROM will reset everything back to start.
Needed Files:
1. Files from Project Spaget X here.
Exynos7870_CreateVendor.zip is to create /vendor partition.
Exynos7870_ProjectSpaget_V3.0.zip is to install necessary for Treble Project.
Exynos7870_RevertVendor.zip is to delete /vendor partition, in case of uninstalling Treble Project.
2. Treble ROM with ARM64 A only here. My favorite Treble ROMs are Lineage, Arrow and Havoc. I am currently using Arrow.
3. ARM64 GAPPS here.
4. Kraken Kernal here or here. Please download for Treble only. RC12 is universal.
5. Magisk here.
Step I Flash Treble project:
1. boot TWRP recovery
2. wipe Data, Cache, Dalvik, System
3. flash Exynos7870_CreateVendor.zip and reboot to recovery
4. flash Exynos7870_ProjectSpaget_V3.0.zip
Step II Flash Treble ROM:
1. flash Treble ROM ARM64 A only, no need to reboot to recovery in order to install the ROM.
Edit: Reboot to Recovery > Install > press Install Image > choose your Rom.img
2. After flashing the ROM, I usually reboot to system in order to test whether or not the flashed ROM can boot nicely.
2.1 If the flashed ROM cannot boot or brick or bootloop in Logo, press Home + Power + Vol Down to force reboot to Bootloader and boot to recovery.
2.2 Back to recovery. wipe Data, Cache, Dalvik, System
2.3 flash Exynos7870_ProjectSpaget_V3.0.zip before flashing new Treble ROM.
Step III Flash ARM64 GAPPS:
1. Choose Wipe > Advanced Wipe > choose System > Repair > Resize. Sometimes you need to do this twice in order to resize since the first time will show error.
2. flash GAPPS
Step IV Flash Kraken Kernal:
1. Mount > System and Vendor partitions
2. flash KRAKEN-Kernel-RC12-universal7870-Treble-20200314.zip (The latest version of Kraken)
3. reboot to system
I usually reboot once to system before flashing Magisk.
Step V Flash Magisk:
1. Mount > System and Vendor partitions
2. flash Magisk to root
3. reboot to system
4. run Play Store and set up your account
5. run Magisk Manager. When you press Tap to start SafetyNet check, you will find out that ctsProfile: false.
Please note that Usually it will be installed when you have GAPPS installed. If not, you can install Magisk Manager manually.
6. choose Downloads > search "SafetyPatch by hackintosh" > download and install > reboot This will fix ctsProfile false to be true.
Now you are done the basice steps to flash Treble ROMs for your J7 Prime. Any questions please leave a message under the thread.
Cheers, :highfive::highfive::highfive:
Thanks for your helpful post, but when i tried to flash system.img via TWRP, it showed just boot and recovery partition, i cant see system partition to choose, please help me. Thank you and sorry for my bad English
---------- Post added at 05:11 PM ---------- Previous post was at 04:53 PM ----------
dctviphb2 said:
Thanks for your helpful post, but when i tried to flash system.img via TWRP, it showed just boot and recovery partition, i cant see system partition to choose, please help me. Thank you and sorry for my bad English
Click to expand...
Click to collapse
i can flash now but when i flashed system.img completed, TWRP said that no OS installed, what can i do. thanks for your help
dctviphb2 said:
Thanks for your helpful post, but when i tried to flash system.img via TWRP, it showed just boot and recovery partition, i cant see system partition to choose, please help me. Thank you and sorry for my bad English
---------- Post added at 05:11 PM ---------- Previous post was at 04:53 PM ----------
i can flash now but when i flashed system.img completed, TWRP said that no OS installed, what can i do. thanks for your help
Click to expand...
Click to collapse
Please follow the attached screentshot.
1. In the main menu of TWRP, choose Install.
2. Choose your ROM.img
3. Select System Image. This step will tell TWRP to flash your ROM.img to the /system partition.
Note: Attached Screenshots #1-3 is to show steps to mount your /system and /vendor partition. Before your can do these steps, you need to flash Spaget X in the step I of my original post.
Hope this help.
siamese007 said:
Please follow the attached screentshot.
1. In the main menu of TWRP, choose Install.
2. Choose your ROM.img
3. Select System Image. This step will tell TWRP to flash your ROM.img to the /system partition.
Note: Attached Screenshots #1-3 is to show steps to mount your /system and /vendor partition. Before your can do these steps, you need to flash Spaget X in the step I of my original post.
Hope this help.
Click to expand...
Click to collapse
Thank you. I just remember that when i flash spaget my TWRP said "symlink: some symlink faild. Error 7". I have tried both TWRP 3.2.1 and 3.2.3 but both of them didnot work. I think i will try another version, or if you have any idea please tell me. Thank you so much
dctviphb2 said:
Thank you. I just remember that when i flash spaget my TWRP said "symlink: some symlink faild. Error 7". I have tried both TWRP 3.2.1 and 3.2.3 but both of them didnot work. I think i will try another version, or if you have any idea please tell me. Thank you so much
Click to expand...
Click to collapse
You're welcome. I honestly never experience this kind of error.
I found a solution about this error on youtube.
This solution is to extract ROM file and edit updater-script file with notepad++.
Edit: try this Spaget X file. I followed this youtube tutorial trying to fix error 7 that you got when flashing Spaget X.
Another possibility of this error is Partition messed up.
I would try to flash stock ROM with Odin to reset everything to factory default.
Caution: Back up your data before flashing Stock ROM.
Follow the instruction of how to flash Stock ROM in the Stock ROM page or here. Flashing Stock ROM will also remove TWRP recovery and re-partition.
Hope one of this solution help, :highfive::highfive::highfive:
Thank you so much. I think the problem is I am using HROM, which has Repatition.zip, so I think that my partition has messed up, that the reason I face the issue. I will try to solve it with your idea. Thanks so much for helping me, if I can solve the problem I will tell you
Thanks for your helping, after having flashed PIT files I has installed ArrowOS. I found that if TWRP show "No OS installed" after flashing ROM.img we must flash Spaget again to boot normally. Anyway I found that ArrowOS when I turn off screen for a while, when turn it on, it takes about 5s to screen on, do u have any solution? anyway tks so much
dctviphb2 said:
Thanks for your helping, after having flashed PIT files I has installed ArrowOS. I found that if TWRP show "No OS installed" after flashing ROM.img we must flash Spaget again to boot normally. Anyway I found that ArrowOS when I turn off screen for a while, when turn it on, it takes about 5s to screen on, do u have any solution? anyway tks so much
Click to expand...
Click to collapse
That's great NEWS. You've managed to find a solution for No OS installed error.
By the way, for the deep sleep problem that you mentioned, I also experience the same thing. My solution is to press home button to immediately wake the phone up from deep sleep.
[HELP]Treble Incompatible device (J7 PRIME)
I'm also using J7 prime G610F...but when i used Treble Checker is showed my device is Treble Incompatible...I don't understand why it is not working for me while you guys have the same phone and its working...also i'm using a custom rom (reserruction remix) so perhaps should i load up my stock system then try? I also tried to install the Treble project using the steps above but i couldn't flash the image...twrp was only detecting zip files and when i clicked in INSTALL IMAGE it would.nt show any image file which i transferred in my phone
hussain_mdj said:
I'm also using J7 prime G610F...but when i used Treble Checker is showed my device is Treble Incompatible...I don't understand why it is not working for me while you guys have the same phone and its working...also i'm using a custom rom (reserruction remix) so perhaps should i load up my stock system then try? I also tried to install the Treble project using the steps above but i couldn't flash the image...twrp was only detecting zip files and when i clicked in INSTALL IMAGE it would.nt show any image file which i transferred in my phone
Click to expand...
Click to collapse
Unpack .xz file
TWRP still doesn't detect the image
thanhphat95 said:
Unpack .xz file
Click to expand...
Click to collapse
...
---------- Post added at 12:53 AM ---------- Previous post was at 12:48 AM ----------
thanhphat95 said:
Unpack .xz file
Click to expand...
Click to collapse
i'm dummy dum so forgive and thenk
dctviphb2 said:
Thanks for your helping, after having flashed PIT files I has installed ArrowOS. I found that if TWRP show "No OS installed" after flashing ROM.img we must flash Spaget again to boot normally. Anyway I found that ArrowOS when I turn off screen for a while, when turn it on, it takes about 5s to screen on, do u have any solution? anyway tks so much
Click to expand...
Click to collapse
There is a solution...in phh treble settings go to doze then turn on out of pocket feature....works like a charm for me.....
------------
HAPPY TO HELP..
This is a bit late but why not. THIS IS A COMPILATION OF ALL THE OS METHODS YOU NEED FOR THE OP6/6T.
ENJOY my guide
DISCLAIMER:
*I am not responsible for bricked devices, damage to your device*
Sorry for a long list of methods, some work for others and some don't. But I recommend to pick a method and stick to it. Maybe read the part at the top as some have notes about mine or someone else's experience/recommendation. Don't skip steps and follow each step.
If stuck, just ask and I or anyone else will try and help
I am here to post methods for anyone who is interested/need help. I have tested these myself and helped others who may be struggling
Download
The guide has loads of files/ zips/ tools to use/flash/install. But no worries as everything can be downloaded and there are links AT THE BOTTOM OF THIS THREAD (NOT COMMENTS) to where to download:
SDK Platform Tools (Fastboot tools) from Developer Android
TWRP from mauronofrio
Magisk from topjohnwu
Gapps (Google Apps) from NikGapps. I recommend omni for ROMs that don't include Gapps.
Fastboot ROM for OP6 + OP6T from mauronofrio
MSMDownload tools for OP6 + OP6T from Some_Random_Username
IMPORTANT NOTES!
YOU REQUIRE Platform Tools (Fastboot Tools) IN ORDER TO USE THE METHODS IN THIS GUIDE AS TWRP NEEDS TO BE INSTALLED!
YOU NEED TO HAVE A UNLOCKED BOOTLOADER AS WELL!
For GAPPS, u can use the same or a updated version of the package. But has to be the same type u used to install it like (stock, full, Omni, basic, etc). ONLY FLASH/INSTALL IF the RESTORE SCRIPT DIDN'T SHOW UP during a DIRTY FLASH/UPDATE AND ONLY FLASH AFTER REBOOTING TO RECOVERY AFTER FLASHING/INSTALLING A OS/BUILD ZIP FILE!
How to get Platform Tools
These tools are used to install TWRP, to unlock the bootloader of your device and is needed to use the METHODS in this guide.
Download the platform tools.zip of your software platform (Mac, Windows, Linux)
Extract the platform-tools.zip
To use it go into your platform-tools folder
Press shift + right-click and choose command prompt or PowerShell
Connect your device when it's in fastboot mode and done
How to install TWRP
Sadly this Guide is for Windows, but other platforms like Mac or Linux can be found online.
YOU CAN USE THIS METHOD TO INSTALL A NEWER VERSION OF TWRP TOO
You need to have downloaded Platform Tools which the link is attached below.
Transfer the TWRP.img file into the platform-tools folder
Now transfer TWRP.zip into your device's internal storage. (connect -> allow file transfer -> drag and drop files)
If you want root download and transfer magisk.apk and the link is supplied below. Also, RENAME from .apk to .zip
Now we must boot into fastboot mode. (Either do it with the advanced reboot in developer options or power off device -> boot recovery Vol - + power -> boot to bootloader or power off device -> press Vol Up + Vol down + power)
Now connect your device to a Windows device
Press shift + right-click. Choose command prompt or PowerShell
Enter "fastboot devices" and your device should be displayed if it's connected
Type "fastboot boot twrp" file name (do twrp + press tab) and press enter
Then you should be booted into TWRP
Enter the password and swipe to allow modifications
Press install and find your TWRP.zip file
Swipe to confirm Flash
If you want root do this
Press the back arrow and find your magisk.zip
Swipe to confirm Flash
Reboot to the system and done
Otherwise, just reboot to system. Up to u
Installing a Custom ROM
Install Custom ROM on OP6T from OOS
Make sure u have BACKED UP your device and have the latest OOS installed in both slots. If u do, go to Method 3.
If u have finalize.zip, go to Method 2.
Method 1
If u don't have OOS installed in both slots or finalize.zip, use this method.
Transfer OOS.zip file, TWRP.zip, Build.zip (Custom ROM zip file) into internal storage.
Boot to Bootloader
Boot TWRP
Flash OOS + TWRP
reboot recovery
Flash OOS + TWRP
Reboot recovery
Flash Build.zip (Custom ROM zip file)
Flash TWRP
If the ROM doesn't have GApps included do this
Reboot to recovery
Flash Gapps if not included
Format data
Reboot to system
Otherwise, just Format data -> reboot to system. Up to u
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system. Up to u
Method 2
If u have finalize.zip, do this method. Using finalize is way quicker as there's less flashing and rebooting.
Transfer OOS.zip file, finalize.zip, TWRP.zip, Build.zip (Custom ROM zip file) into internal storage.
Boot to Bootloader
Boot to TWRP
Flash OOS + finalize
Boot to Bootloader
Boot to TWRP
Flash Build.zip (Custom ROM zip file)
Flash TWRP
If the ROM doesn't have GApps included do this
Reboot to recovery
Flash Gapps if not included
Format data
Reboot to system
Otherwise, just Format data -> reboot to system. Up to u
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system. Up to u
Method 3
Once you have installed OOS in both slots do this part.
Transfer TWRP.zip, Build.zip (Custom ROM zip file) into internal storage.
Boot to Bootloader
Boot to TWRP
Flash Build.zip (Custom ROM zip file)
Flash TWRP
If the ROM doesn't have GApps included do this
Reboot to recovery
Flash Gapps if not included
Format data
Reboot to system
Otherwise, just Format data -> reboot to system. Up to u
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system. Up to u
Installing Custom Rom not from OOS
You can use finalize method or just flash OOS + TWRP way. The finalize way is there for some who like less flashing and rebooting.
Using the methods in Install Custom ROM on OP6T from OOS
Using the old way, use Method 1
Using finalize.zip, use Method 2
Remember to factory reset (wipe, but no need to wipe internal storage)
Backing Up OOS and Custom ROM
Make sure u have installed the latest TWRP version from mauronofrio
You should use TitaniumBackup or Migrate to back up your apps and contacts.
Also, have a copy of your Internal Storage folders if u have important files.
TWRP Backup backs up your OS like Apps, settings and set up, but not internal storage.
NEVER BACKUP SYSTEM AND VENDOR! ONLY SYSTEM.IMG or VENDOR.IMG IF YOU HAVE TO!
Restoring it makes going back way easier like you have never left
Or you can go manually and try and restore everything, but why do that when you got TWRP?
I do both ways of backing up
Backing up OOS
Boot TWRP recovery
Choose Backup
Choose boot, data. YOU DO NOT NEED TO BACKUP System.img and Vendor.img!
Swipe to backup
Once done, either boot to system or mount
Transfer the whole TWRP folder onto a storage device
Done
Backing up a Custom ROM
Boot TWRP recovery
Choose Backup
Choose boot, data, system.img, vendor.img
Swipe to backup
Once done, either boot to system or mount
Transfer the whole TWRP folder onto a storage device
Done
Restoring OOS and Custom ROM
Restoring OOS TWRP Backup
To restore OOS use either fastboot ROM or MSM. Fastboot is the fastest and easiest way if u have a TWRP backup which there's a method to how to make one in this guide. BUT if you are restoring to go back to stock OOS then use MSM
I use Fastboot ROM restore for that too as we are restoring our data anyways and also for switching/installing a custom ROM. Much easier in my experience.
DOWNLOAD FULL ZIP OF OOS version of your TWRP backup otherwise you could risk doing the whole restore method again OR setup from SCRATCH! IF you aren't restoring a TWRP backup, I recommend either TRANSFER or DOWNLOAD via WiFi or oxygen updater, a UPDATED version of OOS AFTER doing either fastboot ROM or MSM restore methods. As they restore a old version of OOS!
Restoring using Fastboot ROM
Download fastboot ROM of your choice using the link in the Download Link section.
Extract/ un-zip
Boot your device into fastboot mode (Either do it with the advanced reboot in developer options or power off device -> boot recovery Vol - + power -> boot to bootloader or power off device -> press Vol Up + Vol down + power)
Click flash-all.bat
Restoring using MSM Download Tool
Download latest MSM version of your choice using the link in the Download Link section.
Extract/ un-zip
Click on MSM tool .exe file
Turn off device
HOLD BOTH volume buttons
Connect your phone
Wait for your device to be connected and it should show as green
Click verify to check and press start
Wait till phone reboots
The setup device and u can carrying on restoring your device if u don't want a unlock bootloader or return to what your device was like before.
Go into developer options
Allow OEM unlocking
Reboot to bootloader
Enter "fastboot devices" to check your device is connected
Enter "fastboot oem unlock"
Swipe for yes
Then it will reboot again
continue to the next method
For both fastboot and MSM
Once booted into system, set it up and update to OOS version of your TWRP backup.
Download the full zip using the link in the Download Link section.
Transfer the OOS .zip to internal storage.
Go into settings -> system update -> Update via local upgrade -> find zip file and press install
Do this twice to make sure you have installed that version of OOS in both slots
Boot to bootloader
Boot TWRP
Install TWRP
Reboot recovery
Transfer whole TWRP Folder into internal storage
Restore only boot and data
Swipe to restore
If you have backed up your internal storage folders do this
Reboot to recovery
Transfer all your internal storage folders
Reboot to system and done
Otherwise, just reboot to system. U can update OOS as well if it's outdated. The method is below to update OOS with ROOT. Up to u
RESTORING TWRP BACKUP HAS ISSUES ON THESE ROMs
CrDroid (Method 1 + 2 don't work). Method 3 works (install Gapps if the ROM doesn't have it!)
Restoring a Custom ROM TWRP backup 1
I tried using this method, but it didn't work for me.
You can use this method to switch ROMs too
Boot TWRP Recovery
Flash OOS + Finalize
Boot to bootloader, boot TWRP
Flash TWRP
Reboot Recovery
Transfer twrp backup
Restore System.img, Vendor.img and boot
Boot to system and setup system
Reboot to recovery
Restore data
Reboot system. Done
I had an issue with this method where rebooting system it was from fresh and my data didn't restore. If this happened to you, then do method 2 (Restoring a Custom ROM TWRP Backup 2)
Restoring a Custom ROM TWRP Backup 2
The first method didn't work for me. But this method did
Restore fresh like you're going back to OOS.
Choose one method. Fastboot or MSM method.
I prefer the fastboot method.
Download fastboot ROM using the link in the Download Link section.
Extract/ un-zip
Boot your device into fastboot mode (Either do it with the advanced reboot in developer options or power off device -> boot recovery Vol - + power -> boot to bootloader or power off device -> press Vol Up + Vol down + power)
Click flash-all.bat
Once booted into system, set it up briefly and DO NOT RESTORE ANYTHING.
Boot to bootloader
Boot TWRP
Install TWRP
Reboot recovery
Transfer whole TWRP Folder into internal storage
Restore everything (System.img, vendor.img, boot.img and data)
Swipe to restore. If data couldn't restore then boot system, setup system, boot TWRP and restore data.
Reboot system. The first reboot might go dodgy and it did for me.
Reboot system and transfer all your internal storage stuff
done
If this did not work still. Then do the 3rd method...
Restoring a Custom ROM TWRP backup 3
If the previous 2 methods has failed for you. Then try this.
Restore fresh like you're going back to OOS.
Choose one method. Fastboot or MSM method.
I prefer the fastboot method.
Download fastboot ROM using the link in the Download Link section.
Extract/ un-zip
Boot your device into fastboot mode (Either do it with the advanced reboot in developer options or power off device -> boot recovery Vol - + power -> boot to bootloader or power off device -> press Vol Up + Vol down + power)
Click flash-all.bat
Once booted into system, set it up and update to OOS version of your TWRP backup.
Download the full zip using the link in the Download Link section.
Transfer the OOS .zip to internal storage.
Go into settings -> system update -> Update via local upgrade -> find zip file and press install
Do this twice to make sure you have installed that version of OOS in both slots
Transfer TWRP.zip, Build.zip (Custom ROM zip file) into internal storage.
Boot to bootloader
Boot TWRP
Install TWRP
Reboot to Recovery
Flash Build.zip (Custom ROM zip file)
Flash TWRP
If the ROM doesn't have GApps included do this
Reboot to recovery
Flash Gapps if not included
Format data
Otherwise, just Format data -> reboot to recovery. Up to u
Reboot Recovery
Transfer twrp backup
Restore data
Reboot system. Done
If it still fails, repeat steps 1 to 15. But restore everything and you should be back on your custom ROM like you never left.
Updating OOS and Custom ROM
Update OOS with Root (Magisk)
Always do a TWRP backup before updating your OS in case
Download the full zip file of the latest OOS, transfer the zip file to internal storage NOT IN ANY FOLDER
Download and transfer twrp.zip file to internal storage
Go into settings, system update, update via local upgrade and choose the file
Wait till the installation has finished. If failed TRY AGAIN!
DO NOT REBOOT!
Go into Magisk Manager, modules
Find the twrp zip file and install TWRP
DO NOT REBOOT!
Go into Magisk Home
Press install
Press install via inactive slot
Reboot system and done
You will reboot into the next slot
You don’t have to repeat the installation to install the latest OOS in the other slot. But you should and I use this method many times and has never let me down.
Updating OOS without root
Go to System Update -> find the update install and reboot.
Or download the zip -> transfer to internal storage -> update via local upgrade -> reboot and done
Update a Custom ROM
Method 1
Always do a TWRP backup before updating your OS in case
Use this method just to update the ROM.
Boot recovery
Flash new version + twrp
Reboot recovery
Flash new version + twrp
If the ROM doesn't have GApps included,
The restore script should show up during the installation of the new ROM.zip
BUT if the restore script DIDN'T pop up do this
Reboot to recovery
Flash Gapps if not included
Reboot to system
Otherwise, reboot to system. Up to u
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system. Up to u
Method 2
This method uses finalize.zip
Boot recovery
Flash new version + finalize + twrp
If the ROM doesn't have GApps included,
The restore script should show up during the installation of the new ROM.zip
BUT if the restore script DIDN'T pop up do this
Reboot to recovery
Flash Gapps if not included
Reboot to system
Otherwise, reboot to system. Up to u
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system. Up to u
Updating vendor
Use Method 1 and 2 for ROMs with Gapps. Use Method 3 for ROMs with no Gapps included.
Method 1
If u haven’t updated your Custom ROM and your Vendor… You can use this method to update both or just the vendor.
Boot recovery
Flash OOS + twrp
Reboot recovery
Flash OOS + twrp
Reboot recovery
Flash Custom ROM + twrp
Reboot recovery
Flash Custom ROM + twrp
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system
Method 2
This method uses finalize.zip
Boot recovery
Flash OOS + finalize + twrp
Reboot recovery
Flash Custom ROM + finalize + twrp
Otherwise, reboot to system. Up to u
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system
Method 3
This method is for ROMs with no Gapps included
You can use this method as well for updating to a vendor that has a NEWER ANDROID version like from OOS 10 to OOS 11 vendor.
Boot recovery
Flash OOS + Custom ROM + twrp
Reboot recovery
Flash OOS + Custom ROM + twrp
If u flashed GApps, the restore script should show up during the installation of the ROM.zip
If the GApps script didn't show up do this
Otherwise, skip step 3
Flash Magisk if u want root, otherwise skip step 2
Reboot to recovery
Flash Magisk
Flash Gapps
Reboot to system and done
Download Links:
SDK Platform Tools (Fastboot Tools) Here
OOS versions for OP6 (under Signed Flashable zips) Here
OOS versions for OP6T (under Signed Flashable zips) Here
TWRP for OP6 Here
TWRP for OP6T Here
Magisk Here
NikGapps Here
Stock Fastboot ROM for OP6 Here
Stock Fastboot ROM for OP6T Here
MSMDownloadTool for OP6 Here
MSMDownloadTool for OP6T Here
TitanumBackup App Here
Migrate App Here
Credits:
@mauronofrio For his amazing work on the TWRP recovery and Stock Fastboot ROMs for OP6/6T
@topjohnwu For his work on Magisk
@Nikgapps For their work on creating Gapps
@Some_Random_Username For his Collection of MSMDownloadTool for OP6/6T
@OPTeam For the collection of OOS zips for OP6/6T
@dreamwhite For the method (Method 3) of updating the vendor which works wonders for ROMs with no GApps included
First
Hey Guys,
Need a some expert advice please.
Long story short. I need to replace my OP 6T McLaren's battery as I have serious degradation in battery capacity (73% Serious Loss), meaning the battery is no longer charging to 3700mAh, max charging atm is around 2600mAh, which it drains very quickly. FYI Anything above 80% is the limit for average performance, >90% is best. You can use the OP Diagnostic App 1.0.0.9 to determine your own status. Does not work on all OP devices above 6 btw. Maybe other versions work. Anyway, will be getting OP to change the battery (no real local guys I can trust tbh, all Sammy & Apple guys...) and they want me to Factory Reset the device (complete wipe including internal storage (backed up already to PC)) before sending the device to the OP Repair Center for the obvious reasons of Privacy & Security.
On my device, I have a suite of apps that are no longer available to install with APK specially Signed, but won't be able to re-install (long story & can discuss in a PM more if there is an interest to help on this). These APK will not work any other way, I've tried! This being said, I know that TWRP Nandroids work well & have been doing these backups for yrs and have restored backups with these apps installed and it works! But I have not had to restore any as of late and TWRP Backup has somewhat changed in regards to the partition selections available. See TWRP Options pic below.
When OP returns the device to me, it will mostly likely be on the latest release of 10.3.11 (Hopefully).
Here is the current setup and runs perfectly!
OOS 10.3.11
TWRP: twrp-3.5.2_9-0-fajita
Magisk 23
The last Nandroid done today (No PW for good measure, but secured locally offline), I selected all partitions. Is this the best way to insure I get my full device backup restored?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm guessing that I will have to, Unlock the Bootloader, reinstall TWRP same version the Nandroid was created with in order to restore that backup.
Looking forward to hearing from you guys to make the best decision before proceed with the factory reset.
Thanking you all in advance for your time & assistance!
Cheers!
plepew said:
Hey Guys,
Need a some expert advice please.
Long story short. I need to replace my OP 6T McLaren's battery as I have serious degradation in battery capacity (73% Serious Loss), meaning the battery is no longer charging to 3700mAh, max charging atm is around 2600mAh, which it drains very quickly. FYI Anything above 80% is the limit for average performance, >90% is best. You can use the OP Diagnostic App 1.0.0.9 to determine your own status. Does not work on all OP devices above 6 btw. Maybe other versions work. Anyway, will be getting OP to change the battery (no real local guys I can trust tbh, all Sammy & Apple guys...) and they want me to Factory Reset the device (complete wipe including internal storage (backed up already to PC)) before sending the device to the OP Repair Center for the obvious reasons of Privacy & Security.
On my device, I have a suite of apps that are no longer available to install with APK specially Signed, but won't be able to re-install (long story & can discuss in a PM more if there is an interest to help on this). These APK will not work any other way, I've tried! This being said, I know that TWRP Nandroids work well & have been doing these backups for yrs and have restored backups with these apps installed and it works! But I have not had to restore any as of late and TWRP Backup has somewhat changed in regards to the partition selections available. See TWRP Options pic below.
When OP returns the device to me, it will mostly likely be on the latest release of 10.3.11 (Hopefully).
Here is the current setup and runs perfectly!
OOS 10.3.11
TWRP: twrp-3.5.2_9-0-fajita
Magisk 23
The last Nandroid done today (No PW for good measure, but secured locally offline), I selected all partitions. Is this the best way to insure I get my full device backup restored?
View attachment 5319753
I'm guessing that I will have to, Unlock the Bootloader, reinstall TWRP same version the Nandroid was created with in order to restore that backup.
Looking forward to hearing from you guys to make the best decision before proceed with the factory reset.
Thanking you all in advance for your time & assistance!
Cheers!
Click to expand...
Click to collapse
Idk if u have read Mauronofrio's XDA thread on TWRP backups. BUT NEVER BACKUP OR RESTORE SYSTEM OR VENDOR! From my guide, you don't need to backup vendor.img or system.img or anything else that's not Boot or Data FOR OOS. Make sure you have everything like a copy of everything folder/file in your internal storage before u wipe it.
BUT because you're going to wipe your device. U should have a copy of everything in case but don't backup system or vendor as they're useless and will crash your system if u restore those!
After you've got your device from repair, follow my method to restore OOS TWRP backup on your device and YOU'LL only NEED TO RESTORE BOOT + DATA. Once you have booted back to your system, everything should be there like you never left, but transfer your internal storage stuff as some apps store files in your internal storage. Once that is done, that should be it and it would be like you've never left
If the TWRP backup restore doesn't work let me know, but from my experience with going back to OOS via my TWRP backup I only backed up and restored boot + data for OOS. Custom ROMs are different but isn't the case for you
Extreme_Ninja2099 said:
Idk if u have read Mauronofrio's XDA thread on TWRP backups. BUT NEVER BACKUP OR RESTORE SYSTEM OR VENDOR! From my guide, you don't need to backup vendor.img or system.img or anything else that's not Boot or Data FOR OOS. Make sure you have everything like a copy of everything folder/file in your internal storage before u wipe it.
BUT because you're going to wipe your device. U should have a copy of everything in case but don't backup system or vendor as they're useless and will crash your system if u restore those!
After you've got your device from repair, follow my method to restore OOS TWRP backup on your device and YOU'LL only NEED TO RESTORE BOOT + DATA. Once you have booted back to your system, everything should be there like you never left, but transfer your internal storage stuff as some apps store files in your internal storage. Once that is done, that should be it and it would be like you've never left
If the TWRP backup restore doesn't work let me know, but from my experience with going back to OOS via my TWRP backup I only backed up and restored boot + data for OOS. Custom ROMs are different but isn't the case for you
Click to expand...
Click to collapse
Wow, thanks for the quick reply!
I have not read Mauronofrio thread and will do!
I completely missed the system & vendor piece in your instructions....my bad!
So just to confirm, my backup that I have done with all checked off is good, but only restore Boot & Data with an exact duplicate of the current Internal Storage...right?
Going forward, when creating the Backup, just select Boot & Data and I'm good to go? Or select all Except: System Image(only) & Vendor options (both)?
Also, just so I can understand a bit better, "System" is the actual OOS? Meaning, if I restore Boot & Data on any OOS, all my apps and data will be as I never left, or we should always restore on the OOS that was current at the moment of the Backup (which I have always done in the past).
PS. I may just do the backup again, just to make sure SYSTEM & VENDOR are not there for good measure!
plepew said:
Wow, thanks for the quick reply!
I have not read Mauronofrio thread and will do!
I completely missed the system & vendor piece in your instructions....my bad!
So just to confirm, my backup that I have done with all checked off is good, but only restore Boot & Data with an exact duplicate of the current Internal Storage...right?
Going forward, when creating the Backup, just select Boot & Data and I'm good to go? Or select all Except: System Image(only) & Vendor options (both)?
Also, just so I can understand a bit better, "System" is the actual OOS? Meaning, if I restore Boot & Data on any OOS, all my apps and data will be as I never left, or we should always restore on the OOS that was current at the moment of the Backup (which I have always done in the past).
PS. I may just do the backup again, just to make sure SYSTEM & VENDOR are not there for good measure!
Click to expand...
Click to collapse
First off, I already posted everything you need in my last comment and that's what I usually do. Everything should be there and not like you need to pay or reply to get the extra stuff that you may need. No point in replying asking for more as I'll just be repeating myself over and over.
Just choose boot & data for TWRP backups for OOS specifically going forward and after you got your device from repair. System, vendor doesn't work in my experience and will crash your system. Only backup the .img variant which was stated by the dev (Mauronofrio) for TWRP for OP6/6T devices. Only backup system.img and vendor.img if u need to backup system+vendor, but YOU don't have to for OOS and I said this previously.
JUST DO A BACKUP OF EVERYTHING OTHER THAN SYSTEM AND VENDOR. YOU SHOULD ONLY BACKUP SYSTEM.IMG AND VENDOR.IMG NEVER SYSTEM OR VENDOR.
They never work and will increase the size of your backup and will take even longer to transfer to your storage device from your phone.
YES, to your new question. You should update/ be on the same OOS version as your TWRP backup before u restore data + boot. Restore OOS via fastboot or msm and update to get to the same version of OOS as your TWRP backup. YOU should only do this if your phone is in the wrong version of OOS as your backup after you've got it back from REPAIR.
ALWAYS BE ON THE SAME VERSION OF OOS AS YOUR TWRP BACKUP BEFORE YOU RESTORE YOUR TWRP BACKUP OF OOS!
Maybe take a copy of your wifi passwords, take a google backup in settings, take a copy of sms/call logs and contacts. Other stuff that you may not have stored just in case the TWRP backup fails, but it shouldn't. Good luck
This should be it and there isn't anything else that you'll need
Extreme_Ninja2099 said:
First off, I already posted everything you need in my last comment and that's what I usually do. Everything should be there and not like you need to pay or reply to get the extra stuff that you may need. No point in replying asking for more as I'll just be repeating myself over and over.
Just choose boot & data for TWRP backups for OOS specifically going forward and after you got your device from repair. System, vendor doesn't work in my experience and will crash your system. Only backup the .img variant which was stated by the dev (Mauronofrio) for TWRP for OP6/6T devices. Only backup system.img and vendor.img if u need to backup system+vendor, but YOU don't have to for OOS and I said this previously.
JUST DO A BACKUP OF EVERYTHING OTHER THAN SYSTEM AND VENDOR. YOU SHOULD ONLY BACKUP SYSTEM.IMG AND VENDOR.IMG NEVER SYSTEM OR VENDOR.
They never work and will increase the size of your backup and will take even longer to transfer to your storage device from your phone.
YES, to your new question. You should update/ be on the same OOS version as your TWRP backup before u restore data + boot. Restore OOS via fastboot or msm and update to get to the same version of OOS as your TWRP backup. YOU should only do this if your phone is in the wrong version of OOS as your backup after you've got it back from REPAIR.
ALWAYS BE ON THE SAME VERSION OF OOS AS YOUR TWRP BACKUP BEFORE YOU RESTORE YOUR TWRP BACKUP OF OOS!
Maybe take a copy of your wifi passwords, take a google backup in settings, take a copy of sms/call logs and contacts. Other stuff that you may not have stored just in case the TWRP backup fails, but it shouldn't. Good luck
This should be it and there isn't anything else that you'll need
Click to expand...
Click to collapse
Thank you!!
Hey guys, for some reason I ended up on "Unmodified System Partitions", must have tapped the screen a few times in error while handling the phone I guess.
What should I do?
Unable to go back to TWRP main menu without selecting an option.
I am rooted, on stock OOS and not doing customs ROM at this time...
What should I do?
Select "Keep Read Only"? or Swipe to "Allow Modifications"?
thanking you guys in advance for you help & guidance!
plepew said:
Hey guys, for some reason I ended up on "Unmodified System Partitions", must have tapped the screen a few times in error while handling the phone I guess.
What should I do?
Unable to go back to TWRP main menu without selecting an option.
I am rooted, on stock OOS and not doing customs ROM at this time...
What should I do?
Select "Keep Read Only"? or Swipe to "Allow Modifications"?
View attachment 5320971
thanking you guys in advance for you help & guidance!
Click to expand...
Click to collapse
Swipe to allow modifications. But it seems that your internal storage corrupted. Not sure what you did and how you got into this situation.
After you swiped to allow modifications... If the internal storage files are a messed up, try to switch slots and reboot recovery
Extreme_Ninja2099 said:
Swipe to allow modifications. But it seems that your internal storage corrupted. Not sure what you did and how you got into this situation.
After you swiped to allow modifications... If the internal storage files are a messed up, try to switch slots and reboot recovery
Click to expand...
Click to collapse
I swiped and yeah, the IS was messed up in File Managfer(TWRP).
Selected Reboot then Selected the Slot I remembered I was on : "A"
Rebooted & Boom all good!
Thank you for the help once again! You rock!!
plepew said:
I swiped and yeah, the IS was messed up in File Managfer(TWRP).
Selected Reboot then Selected the Slot I remembered I was on : "A"
Rebooted & Boom all good!
Thank you for the help once again! You rock!!
Click to expand...
Click to collapse
Cool and at least that was a easy fix
Sorry, I'm a total noob, hopefully this is an easy question to answer. Is there any way that I can tell what version of OOS my TWRP Backup contains? I can't remember what version my phone was running when I did the TWRP backup and don't want to mess it up after I restore the phone from MSM. Thanks in advance for your help!
Sorry, I'm a total noob, hopefully this is an easy question to answer. Is there any way that I can tell what version of OOS my TWRP Backup contains? I can't remember what version my phone was running when I did the TWRP backup and don't want to mess it up after I restore the phone from MSM. Thanks in advance for your help!
jas84701 said:
Sorry, I'm a total noob, hopefully this is an easy question to answer. Is there any way that I can tell what version of OOS my TWRP Backup contains? I can't remember what version my phone was running when I did the TWRP backup and don't want to mess it up after I restore the phone from MSM. Thanks in advance for your help!
Click to expand...
Click to collapse
Well u posted this twice which isn't necessary and people will try and reply. But I'm not sure if there is a way to know and as long as u copied the whole TWRP folder for that backup, u should be fine restoring it with a newer version of TWRP. If it really matters to you, then maybe try and find the latest TWRP on the date you did the backup? I think just using a newer TWRP version should be fine
Should I use the same Gapps package I flashed during clean installing when updating custom rom?
Waynenolan92 said:
Should I use the same Gapps package I flashed during clean installing when updating custom rom?
Click to expand...
Click to collapse
U don't have to use the same gapps package. Using a updated one would be better. But, u only have to for ROMs that don't include gapps (vanilla builds) AND the Restore script doesn't show up during installation. Opengapps doesn't have that script but nikgapps does. Using dirty flash/updating a ROM should show the restore script and if it doesn't then just reboot to recovery and flash the updated or same gapps package. This can also be the same for updating the base/vendor (use method 3 in that section of the guide). I hope this helps
Extreme_Ninja2099 said:
U don't have to use the same gapps package. Using a updated one would be better. But, u only have to for ROMs that don't include gapps (vanilla builds) AND the Restore script doesn't show up during installation. Opengapps doesn't have that script but nikgapps does. Using dirty flash/updating a ROM should show the restore script and if it doesn't then just reboot to recovery and flash the updated or same gapps package. This can also be the same for updating the base/vendor (use method 3 in that section of the guide). I hope this help
Click to expand...
Click to collapse
Thanks for your replay)))it's my first using vanilla rom(without Gapps), so I flashed nikigapps Omni package, and my question is: should I always use the same package, or I can go with core package for example?
Waynenolan92 said:
Thanks for your replay)))it's my first using vanilla rom(without Gapps), so I flashed nikigapps Omni package, and my question is: should I always use the same package, or I can go with core package for example?
Click to expand...
Click to collapse
U can... But it doesn't really matter as a updated package works fine and u only need to use it if the nikgapps restore script doesn't show up when updating the ROM or vendor/base (OOS underneath)
I want to CHANGE custom ROMs (havoc to Lineage OS a11 to a12) I have taken TWRP back up of boot+data+system.img+ vendor.img. once I flash the new a12 Lineage plus Nikapps core plus magisk. What steps to restore data? any response is appreciated in advance. Thank you.