Database Develop

Source Code

Hey, I just saw that Motorola has released the source-code for our beloved Razr I on sourceforge.
So in theory it should be possible to compile our own androids. I was wandering whether anybody is working on this / has tried that?
http://sourceforge.net/projects/razr-i.motorola/
Thorsten

Yes, we could use that if they'd give us a non-corrupted kernel source. We already knew this.

I've had a brief attempt at this but always get build errors at make.
So far I've tried with cyanogenmod ics release and aosp but not entirely sure how to overlay the motorola repos. Most are fairly obvious and can be merged into device, external, hardware etc but don't know where to put the Motorola folder...
turl set up a device tree for the razri a while ago but it hasn't been touched since:
https://github.com/turl/android_device_motorola_smi
@Vistaus - Motorola updated did updated the source after the initial corrupt version.

Okay thanks for the info.
Maybe naive, but what about trying to contact Motorola and ask them how the build-pocess works? Or do you think they would not help?

Thorstenk said:
Okay thanks for the info.
Maybe naive, but what about trying to contact Motorola and ask them how the build-pocess works? Or do you think they would not help?
Click to expand...
Click to collapse
I've built my own kernel from source months ago but forgot to include the modules too so I had no WiFi or bluetooth lol oh well.

mattlgroff said:
I've built my own kernel from source months ago but forgot to include the modules too so I had no WiFi or bluetooth lol oh well.
Click to expand...
Click to collapse
Sounds good!
Could you explain how you did it?

cbanbury said:
I've had a brief attempt at this but always get build errors at make.
@Vistaus - Motorola updated did updated the source after the initial corrupt version.
Click to expand...
Click to collapse
That is not what developers say and I doubt developers will lie about it.

Thorstenk, the instructions for building the kernel are in the README.
The instructions for building in the WIFI/bluetooth modules are also pretty clear.
I may try another build with just these, I was running into problems when trying to build with all 37-38 folders overlayed...

Thanks man, will give it a try, unfortunately I am not very experienced ...
cbanbury said:
Thorstenk, the instructions for building the kernel are in the README.
The instructions for building in the WIFI/bluetooth modules are also pretty clear.
I may try another build with just these, I was running into problems when trying to build with all 37-38 folders overlayed...
Click to expand...
Click to collapse

cbanbury said:
Thorstenk, the instructions for building the kernel are in the README.
The instructions for building in the WIFI/bluetooth modules are also pretty clear.
I may try another build with just these, I was running into problems when trying to build with all 37-38 folders overlayed...
Click to expand...
Click to collapse
This was how I did it. Just followed the readme. Modules didn't work right though as I said.
Sent from my XT890 using Tapatalk 2

Just tried to compile the whole thing which did not work, overlaying everything is definitely not sufficient. I guess we need to do more.
After that I tried to bake a kernel, wich did not work as well, always another build error. I am working on a mac which probably makes the situation that bad, no idea.
Dont get why they do not provide a tar-ball where everything is included ...
mattlgroff said:
This was how I did it. Just followed the readme. Modules didn't work right though as I said.
Sent from my XT890 using Tapatalk 2
Click to expand...
Click to collapse

I'm on a mac also, it shouldn't be an issue if you are on a case sensitive file system n using correct java, gcc etc.
Check the version of xcode you are using as well, I had to install version 3.
Oh and post the error message. I got to the point where it was complaining about multiple copies of busybox from the overlayed folders (which is why I think we don't need all of them)
Sent from my XT890 using xda app-developers app

New WebKit Part Online and a new README -> how to compile the complete ROM IMHO.
http://sourceforge.net/projects/razr-i.motorola/files/razr-i/9.8.2I-50_SMI-26/

lord0815 said:
New WebKit Part Online and a new README -> how to compile the complete ROM IMHO.
http://sourceforge.net/projects/razr-i.motorola/files/razr-i/9.8.2I-50_SMI-26/
Click to expand...
Click to collapse
README instructions are the same as ICS, hope it works this time..

lord0815 said:
New WebKit Part Online and a new README -> how to compile the complete ROM IMHO.
http://sourceforge.net/projects/razr-i.motorola/files/razr-i/9.8.2I-50_SMI-26/
Click to expand...
Click to collapse
Yes, I bothered Motorola for this last night. Glad they sorted it so quickly.
Also don't include the recovery folder at the moment.
I had an unsuccessful build this morning so I think there's still some things missing...
Sent from my XT890 using xda app-developers app

cbanbury said:
Yes, I bothered Motorola for this last night. Glad they sorted it so quickly.
Also don't include the recovery folder at the moment.
I had an unsuccessful build this morning so I think there's still some things missing...
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
Keep bothering ! :good:

Theres a new tree online SMI-28 maybe with a working kernel source this time?!
http://sourceforge.net/projects/razr-i.motorola/files/razr-i/9.8.2I-50_SMI-28/
https://android.googlesource.com/pl...-linux-4.4.3/+show/refs/tags/android-4.1.2_r1

Didn't have time to look at this over the weekend but will try a build tonight. Hopefully they fixed everything this time *fingers crossed*

cbanbury said:
Didn't have time to look at this over the weekend but will try a build tonight. Hopefully they fixed everything this time *fingers crossed*
Click to expand...
Click to collapse
My hopes are in you! So very good luck!

diogo.sena said:
Keep bothering ! :good:
Click to expand...
Click to collapse
WAY OFFTOPIC:
Wow! You also come here from moto defy! Regards!
Enviado desde mi XT890 usando Tapatalk 2

[ROM][DEV][OFFICIAL][v500] CM 11.0 Nightlies

This thread is for discussion of the nightlies only from http://download.cyanogenmod.org
Where to get info:
A good place to discuss in real-time is IRC at channel #lg-gpad on freenode
You can follow me on:
Google+: https://plus.google.com/114860410994043943287
Twitter: @dalingrin
Google+ is preferred but I will cross post to twitter as well.​
Known issues:
-While LG's knock on feature works, knock off does not work yet.(A simple work around is go to the settings and add a "go to sleep" quick settings tile)
-Currently only for v500. GPE v510 support coming soon.​
Installation:
Instructions will be up soon at http://wiki.cyanogenmod.org
Must have latest recoveries installed. If you installed your recovery prior to December 6th 2013 then you need to update it.
If flashing from a LG based rom then you must wipe the /data
Google Apps: http://wiki.cyanogenmod.org/w/Gapps​
Download:
http://download.cyanogenmod.org​

Let'go with the ROMs yeeees
Inviato dal mio Galaxy Nexus utilizzando Tapatalk

Yes yes yes!
Sent from my GT-N7105 using XDA Premium 4 mobile app
---------- Post added at 06:33 PM ---------- Previous post was at 06:28 PM ----------
Is there gonna be an official CWM recovery or support from Rom Manager? Since this is official and Koush is part of the team... Just asking?
Sent from my GT-N7105 using XDA Premium 4 mobile app

My CWM build should work as it was updated with the same kernel that TWRP was updated from. I'll test it myself when the nightly is available and let you know.

I don't see the ROM for the LG G Pad.

mustbepbs said:
My CWM build should work as it was updated with the same kernel that TWRP was updated from. I'll test it myself when the nightly is available and let you know.
Click to expand...
Click to collapse
Thanks. I'll update the OP
Tqpolo said:
I don't see the ROM for the LG G Pad.
Click to expand...
Click to collapse
Check the bold text just under the download link =)
Nightlies are built in alphabetical order and our modem is v500 so it'll be an hour or two.

lovely!!! now as soon as someone build TWRP for the GPE I can flash this!!

at last, official cyanogen release! thnx so much mate, keep up the good work

Is the only known issue right now the lack of Knock Off? Otherwise, is it pretty much rock solid, or is it still a work-in-progress?

SCWells72 said:
Is the only known issue right now the lack of Knock Off? Otherwise, is it pretty much rock solid, or is it still a work-in-progress?
Click to expand...
Click to collapse
I've not found any device specific issues.

dalingrin said:
I've not found any device specific issues.
Click to expand...
Click to collapse
Fantastic, great news. Nice to hear there are no camera, wifi, or other issues!
Now I'd be curious to hear user feedback once it is live. I'll probably flash it this weekend.
I hope we do not see a huge decrease in battery. Good to see roms coming!

The Moto X bionic libs should work for this, right? It's a Qualcomm chip and Android 4.4. I'm using them on my DROID DNA and they make things much snappier.

We're on the P's now..so excited. Can't freakin' wait.

mustbepbs said:
We're on the P's now..so excited. Can't freakin' wait.
Click to expand...
Click to collapse
Judging from the queue and speed of releases I think it will be a few good hours until there is a release for the v500.
Sent from my LG-V500 using Tapatalk 4

Not sure but I have to ask. Will you be posting some Screenshots ?

I'm assuming that the gapps listed here at the top (20131208 [Not ART Compatible] ) are the ones to flash along with the upcoming build?
http://wiki.cyanogenmod.org/w/Gapps

mustbepbs said:
The Moto X bionic libs should work for this, right? It's a Qualcomm chip and Android 4.4. I'm using them on my DROID DNA and they make things much snappier.
Click to expand...
Click to collapse
Good chance they'll work but I haven't tried.
naruto.ninjakid said:
Not sure but I have to ask. Will you be posting some Screenshots ?
Click to expand...
Click to collapse
No, Its CyanogenMod so it looks primarily like a Nexus device
muffnman said:
I'm assuming that the gapps listed here at the top (20131208 [Not ART Compatible] ) are the ones to flash along with the upcoming build?
http://wiki.cyanogenmod.org/w/Gapps
Click to expand...
Click to collapse
Yes my understanding is that works the best right now. Hopefully better, more ART compatible, gapps will come soon.
PA Gapps are compatible with ART but they have several other issues.

I'm assuming this will not work on the Google Play Edition version because of Loki, and if i'm correct do you know how hard it'd be to make it work with the GPE? Just kernel I'm assuming? Thanks for your work!

kenhunt said:
I'm assuming this will not work on the Google Play Edition version because of Loki, and if i'm correct do you know how hard it'd be to make it work with the GPE? Just kernel I'm assuming? Thanks for your work!
Click to expand...
Click to collapse
Just the kernel will need to change. It will take a couple of days but we will have unified builds for both GPE V510 and V500 so it will be seamless.

It's up! Downloading now. I'll let you know what happens with CWM as well.
EDIT: Flashed just fine with my CWM build. Booting up now!
EDIT2: Things are going well. First thing I noticed is that auto rotate isn't working for me. Is it working for you, @dalingrin?

MIUI for Moto X, when?

I would love to see MIUI on our device. It would be amazing! What do you guys think?
I don't know anything about ROM Developing though, so I'll have my hopes up for someone to make a port.

MaKTaiL said:
I would love to see MIUI on our device. It would be amazing! What do you guys think?
I don't know anything about ROM Developing though, so I'll have my hopes up for someone to make a port.
Click to expand...
Click to collapse
I doubt we'll ever see it considering the Nexus doesn't even have it. We are pretty locked down here so I'd expect we would get the mainstream roms first if anything.

If anyone has the time and patience to port it, here is a link for a guide
http://forum.xda-developers.com/showthread.php?t=2555094

I've tried porting it from the Nexus 4 and it just bootloops.
Sent from my XT1053

I'd rather go buy an iPhone.

omg yes! I loooved MIUI on my ancient Xperia S, I miss it so much :'(
Enviado de meu XT1058 usando Tapatalk

I would definitely give miui a go.
Sent from my XT1056 using Tapatalk

MaKTaiL said:
I would love to see MIUI on our device. It would be amazing! What do you guys think?
I don't know anything about ROM Developing though, so I'll have my hopes up for someone to make a port.
Click to expand...
Click to collapse
Wait for Miui based on Kitkat to be released...
EDIT:- Sorry... Miuiv6 is in its beta stages... Lets wait for it to be completely released! Hopefully someone will port it over CM or better over the stock ROM which might let us keep active display and touchless control!

Gundabolu SC said:
Wait for Miui based on Kitkat to be released...
EDIT:- Sorry... Miuiv6 is in its beta stages... Lets wait for it to be completely released! Hopefully someone will port it over CM or better over the stock ROM which might let us keep active display and touchless control!
Click to expand...
Click to collapse
I can't get to grab the log cat while bootloading. I have ported miui long ago but a lot has change. I'm using the nexus 7 2013 build and cm to port. I'm not using patch ROM though I don't have Ubuntu
Sent from my XT1060 using Tapatalk

sorullo_xgrx said:
I can't get to grab the log cat while bootloading. I have ported miui long ago but a lot has change. I'm using the nexus 7 2013 build and cm to port. I'm not using patch ROM though I don't have Ubuntu
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
I have no clue on as to how to use the patch ROM.... I have only tried porting like the old ways... ie smali editing.... I tried it when we were at JB with stock ROM but never had the patience to complete it.... And about the Log cat... Have you changed the bootclass path in the boot.img? What guide are you following?
http://forum.xda-developers.com/showthread.php?t=1483332 found this guide about using patchROM, i have a net speed of 256Kbps... it will take me FOREVER to even attempt this...

Gundabolu SC said:
I have no clue on as to how to use the patch ROM.... I have only tried porting like the old ways... ie smali editing.... I tried it when we were at JB with stock ROM but never had the patience to complete it.... And about the Log cat... Have you changed the bootclass path in the boot.img? What guide are you following?
http://forum.xda-developers.com/showthread.php?t=1483332 found this guide about using patchROM, i have a net speed of 256Kbps... it will take me FOREVER to even attempt this...
Click to expand...
Click to collapse
Last time I attempt patchrom it took me almost all night to sync the cm repo, miui repo doesn't take that long. I'm as well doing the editing on smali as well. I was thinking on that of editing the bootclass path. Will try that for now. And also some framework diff too. PS I'm using the same guide
Sent from my XT1060 using Tapatalk

sorullo_xgrx said:
Last time I attempt patchrom it took me almost all night to sync the cm repo, miui repo doesn't take that long. I'm as well doing the editing on smali as well. I was thinking on that of editing the bootclass path. Will try that for now. And also some framework diff too. PS I'm using the same guide
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
I didnt know you needed CMs repo as well... I thought just having the ROM was enough! How about trying to base it off SlimKats repo? It will definitely be less...

[RECOVERY] TWRP 2.8.7.x for Kirin variant

Be sure You have unlocked Your bootloader before.
I don't have this variant of P8, it was already tested but still please report any issues and I'll try to fix them.
Remember it's for Kirin version only.
INSTALLATION:
Just flash it via Fastboot and You should be fine. There's also a possibility to flash it via 'dd' in adb shell, it works too.
DOWNLOADS:
Go!!!!!
CHANGELOG:
v1:
- Initial release
v2:
-fixed resolution
-fixed brightness settings
CREDITS:
- TeamWin for making TWRP, of course
- @jniklast for custom graphics.c for newer Kirin SoCs
Source:Github

Update: The version for Kirin has been tested and it works, so You can flash it and test more without being afraid that You would break anything Meanwhile I'm still waiting for the report from Qcom variant user.
Kirin version is okay, but Qcom version made issues so I won't release it.

OP has rectified the issue.
So thread cleaned and lets stick to development talk now. :good:
Thanks,
Darth
Forum Moderator
Edit: Also, the report button is all you need in the future. No need for drama in the threads. Or use pm's.

New version is up.
v2:
-fixed resolution
-fixed brightness settings

Works fine for Kirin, just finished my first nand for ALE-L21
Gesendet von meinem ALE-L21 mit Tapatalk
---------- Post added at 08:25 PM ---------- Previous post was at 07:38 PM ----------
forgot to tell that I used flashify
Gesendet von meinem SM-T520 mit Tapatalk

thanks for your work, for now all ok

Is reboot to system key working? Mine didnt reboot, just turned off. Need to switch it on manually.

I,m using quick boot (root) and it works
Gesendet von meinem SM-T520 mit Tapatalk

any one plz explain how i flash it
i have p8lite unlocked +rooted

Napst3r88 said:
any one plz explain how i flash it
i have p8lite unlocked +rooted
Click to expand...
Click to collapse
Fastboot, dd method or just Flashify app from Play Store.

Thanks alot for the Recovery. I got my phone today and have in the mean time asked Huawei to release the kernel source for ALE-21/23 and they have replyed to me. Here are the kernel sources: http://emui.huawei.com/en/plugin.php?id=hwdownload&mod=detail&mid=103. As soon as I have time I will look into building a custom rom for the P8 Lite

slade87 said:
Thanks alot for the Recovery. I got my phone today and have in the mean time asked Huawei to release the kernel source for ALE-21/23 and they have replyed to me. Here are the kernel sources: http://emui.huawei.com/en/plugin.php?id=hwdownload&mod=detail&mid=103. As soon as I have time I will look into building a custom rom for the P8 Lite
Click to expand...
Click to collapse
Nice that You appreciate it.
By the way, I was said that there are some issues with making a backup to external storage, could someone confirm it?

reas0n said:
Fastboot, dd method or just Flashify app from Play Store.
Click to expand...
Click to collapse
OK I will try Using Flashify app now
Sent from my ALE-L21 using Tapatalk

reas0n said:
Nice that You appreciate it.
By the way, I was said that there are some issues with making a backup to external storage, could someone confirm it?
Click to expand...
Click to collapse
nice work seems to be working well for me thanks

Why don't you move this thread in p8 lite android development section?

slade87 said:
Thanks alot for the Recovery. I got my phone today and have in the mean time asked Huawei to release the kernel source for ALE-21/23 and they have replyed to me. Here are the kernel sources: http://emui.huawei.com/en/plugin.php?id=hwdownload&mod=detail&mid=103. As soon as I have time I will look into building a custom rom for the P8 Lite
Click to expand...
Click to collapse
Great to here this news.
Will wait for your custom ROm,

mjrifath said:
Great to here this news.
Will wait for your custom ROm,
Click to expand...
Click to collapse
Well the custom kernel is already running with almost rverything except wifi

Do you know how to fix it?
---------- Post added at 09:06 AM ---------- Previous post was at 09:05 AM ----------
slade87 said:
Well the custom kernel is already running with almost rverything except wifi
Click to expand...
Click to collapse
Do you know how to fix it?

slade87 said:
Well the custom kernel is already running with almost rverything except wifi
Click to expand...
Click to collapse
Hope you would fix wifi issue very soon.
All the best and many thanks for your effort.

mjrifath said:
Hope you would fix wifi issue very soon.
All the best and many thanks for your effort.
Click to expand...
Click to collapse
Well i hope so its the only thing left that doesnt work it seems the sys device is not loading correctly. I will continue looking into it and let u know once it works.

Android 9.0 Pie For Galaxy S5

Here, download links if you want to test Lineage 16.0 (Android 9.0 Pie) on Galaxy S5, I have tested on G-900F
RIL(Mobile network and data) and Bluetooth is fixed by Haggertk's latest build
Builds by Haggertk
https://androidfilehost.com/?w=profile&uid=24459283995305391
Builds by brunowp8
https://androidfilehost.com/?w=profile&uid=818070582850499517
Builds by nx111 kltechnduo(SM-G9008W)
https://androidfilehost.com/?w=profile&uid=1322778262904019829
All credits goes to developers,
Please PM me if you have any issues with this thread

It seems yes
This looks like your answer
Chol said:
There are already some klte Pie changes by @haggertk https://review.lineageos.org/#/q/owner:%22Kevin+Haggerty+%253Chaggertk%2540lineageos.org%253E%22+branch:lineage-16.0
---------- Post added at 16:15 ---------- Previous post was at 16:14 ----------
There are already some klte Pie changes by @haggertk https://review.lineageos.org/#/q/owner:%22Kevin+Haggerty+%253Chaggertk%2540lineageos.org%253E%22+branch:lineage-16.0
Click to expand...
Click to collapse

clockstoper said:
This looks like your answer
Click to expand...
Click to collapse
Cool .. i only hope for 1 thing.. hope it takes time like nougat not like oreo ..
Oreo on klte took so so long (many months unofficial roms) with many bugs and missing features (fixed slowly later).. while nougat came pretty soon (1 month for official roms) and with little amount of bugs (fixed later too)

¯\_(ツ)_/¯
Sent from my PH-1 using Tapatalk

Wowza!!!!!!!
haggertk said:
¯\_(ツ)_/¯View attachment 4576955
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
you da man haha :victory::good::good::good::good::good::laugh:

haggertk said:
¯\_(ツ)_/¯
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
OH wow, when you gonna release this?

haggertk said:
¯\_(ツ)_/¯
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
I tried to do and I only have errors :crying::crying:

razor17 said:
OH wow, when you gonna release this?
Click to expand...
Click to collapse
NO ETA

jprimero15 said:
NO ETA
Click to expand...
Click to collapse
Not asking about ETA, just asked about release . . .

Where can I download the test release if there is any (or any download) for Pie?

razor17 said:
Not asking about ETA, just asked about release . . .
Click to expand...
Click to collapse
Oh okay, good I thought a cardinal rule was broken. . . . . . . . . .Wait! Those are the same thing! Sneaky
Sent from my SM-G900V using XDA Labs

swiftbones74 said:
Oh okay, good I thought a cardinal rule was broken. . . . . . . . . .Wait! Those are the same thing! Sneaky
Sent from my SM-G900V using XDA Labs
Click to expand...
Click to collapse
Hahaha :laugh::laugh::good:

With Android "P" is it easier than Oreo`to build Rom's or port ?

KxngSxmir18 said:
With Android "P" is it easier than Oreo`to build Rom's or port ?
Click to expand...
Click to collapse
Let's see... Hmm no, or rather, I have no idea because I've never done either one pretty sure the answer is still no. You may be thinking of project treble and if so I don't believe that project has any benefits for devices that lack the support hardware, (aka devices that got the android Oreo update or shipped with Oreo or pie. If it was easy as pie we would already be running it on our s5's now.
Sent from my SM-G900V using XDA Labs

swiftbones74 said:
Let's see... Hmm no, or rather, I have no idea because I've never done either one pretty sure the answer is still no. You may be thinking of project treble and if so I don't believe that project has any benefits for devices that lack the support hardware, (aka devices that got the android Oreo update or shipped with Oreo or pie. If it was easy as pie we would already be running it on our s5's now.
Sent from my SM-G900V using XDA Labs
Click to expand...
Click to collapse
no , i mean we have now oreo , would it be faster to port ?
Of Course it has severel factors but.
i think.

swiftbones74 said:
Let's see... Hmm no, or rather, I have no idea because I've never done either one pretty sure the answer is still no. You may be thinking of project treble and if so I don't believe that project has any benefits for devices that lack the support hardware, (aka devices that got the android Oreo update or shipped with Oreo or pie. If it was easy as pie we would already be running it on our s5's now.
Sent from my SM-G900V using XDA Labs
Click to expand...
Click to collapse
I don't think that's entirely true. If you consult this graphic, a lot of time on 8.0 was spent converting #1 type HALs to type 2 and 3. That work is already done, plus the ones that were able to be "binderized" (#3) should work out of the box on 9.0 if I understand correctly. You can see the HALs here:
https://github.com/LineageOS/android_device_samsung_msm8974-common/blob/lineage-15.1/manifest.xml
https://github.com/LineageOS/android_device_samsung_klte-common/blob/lineage-15.1/manifest.xml

lineage-16.0 klte build
https://androidfilehost.com/?fid=1322778262903992266
Credits:haggertk

razor17 said:
https://androidfilehost.com/?fid=1322778262903992266
Click to expand...
Click to collapse
Cool. S5 is still my daily driver though; any way to dual boot it off the SD card?

razor17 said:
https://androidfilehost.com/?fid=1322778262903992266
Click to expand...
Click to collapse
For what model is it? sm_G900F? Or sm_G901F?

andreoide said:
For what model is it? sm_G900F? Or sm_G901F?[/QUOT
SM-G900F = klte
Although works fine with my G900I
Click to expand...
Click to collapse