Database Develop

[DISCONTINUED][KERNEL][CM][STOCK][4.4.4] Boom Kernel v1.2 [DT2W][S2W][S2S][KitKat]

DISCONTINUED
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT ASK FOR ETA
*/
Click to expand...
Click to collapse
This is for those who are still loving KitKat.
Click to expand...
Click to collapse
Hi,
This is the KitKat version of Boom Kernel, based on the official Google source. Can flash on any Android One device running on 4.4.4 based roms including stock rom. Optimized for performance, stability and improved battery backup.​
Code:
[CENTER]Tool-chain:(crosstool-NG [COLOR=Red]boom-kernel-Linaro[/COLOR] GCC 2014.06-Cortex-A7)4.7.4[/CENTER]
Downloads:
1. See post #2
Features and Change-log:
1. See post #3
How to Install:
1. Download Boom kernel flashable zip
2. Copy it into SD Card
3. Reboot into custom recovery
4. Install zip from SD Card
Credits:
1. varun.chitre15 (for the GPL source)
2. intersectRaven (for the GPL source)
3. Kunal.Kene.1797 (for the GPL source)
4. Agaphetos (for the GPL source)
5. XDA
6. Google
XDA:DevDB Information
Boom Kernel KitKat, Kernel for the OEM Cross Device Development
Contributors
AnoopKumar
Source Code: https://github.com/HelllGuest/boom_kernel_sprout_kk
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v1.0
Created 2015-06-01
Last Updated 2015-06-09

Downloads
DOWNLOADS​
Boom Kernel v1.0
Boom Kernel v1.2​
​
​

Features and Change-log
Features and Change-log:
Initial Release 2015-06-01
1. Compiled with Linaro GCC 4.7.4 - Cortex-A7 (Boom-Kernel Tool-chain):good:
2. Increased read-ahead to 512kB
3. Dirty ratio tweaks
4. Reduced VFS cache pressure
5. Disabled MMC CRC checking
6. Ext4 speed up
7. Dynamic fsync control
8. Optimized SLUB
9. Disabled GFS and enabled ARCH_POWER
10. NOATIME and NODIRATIME Enabled
11. ThunderQuake Engine
12. Many performance optimization tweaks
13. Improved stability
Second Release 2015-06-09
1. Optimized XZ Compression
2. Added DT2W,S2W and S2S

few minutes ago i downgrade to KK for some reasons
i need this kernel

[V1] Insanity-Kernel [Condor,LP&MM]

Code:
*** Disclamer
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features
Adreno Idler
Power Suspend Driver
Patches For Performance & Stability
FSync
Click to expand...
Click to collapse
Installation instructions
-- Download Latest Build
* -- Reboot To Recovery
* -- Flash Kernel Zip Without Wiping
* -- Reboot Device
Click to expand...
Click to collapse
Download
Download
Project Link
Click to expand...
Click to collapse
Changelog
Code:
Current changelog: -- 06/07/2016
Adreno Idler Added & Updated
Updated Drivers For Backported Features
Many Patches For Performance & Stability
Added Power Suspend Driver
Enabled FSync
Older changelogs:
Code:
Changelog:
Click to expand...
Click to collapse
Thanks To/Credits
Code:
*Me
*Ryan Andri
*Many Others Check Commit Authors
XDA:DevDB Information
Insanity-Kernel, Kernel for the Moto E
Contributors
Dark98
Source Code: https://github.com/Insanity-Kernel/android_kernel_motorola_msm8610
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2016-07-07
Created 2016-07-07
Last Updated 2016-07-06

Reserved

Great Kernel, there are plans to bring new updates?

Anonymous Kernel {V4.2} 13/03 (MM/N)(Nethunter)(Hotspot Fixed)(F2FS)(Yu/Yu+)(Volte Fi

Code:
#include
/*
* Your warranty is now void. Nah! Just kidding No warranty is void in YU. :)
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Anonymous Kernel -->Aim of this kernel is to get better battery backup.....Help me to make this kernel Best,Better,Beast
Previously this Kernel I used For Personal Use
Features I Included In This Kernel
Spoiler: Features:->
*Thunderharge cabability
*Tcp controls
*added darkness(optimised)
*arch power optimizations
*dts sound support
*optimizations for A53/ARMv8 architecture
*added powersuspend
*optimised the interactive governer
*thermal optimizations
*optimizations to gpu
*added f2fs
*upgrade linux to 3.10.104
*add zram optimizations
*Ka mod compatible
*State notifier
*alucard hotplug
*Kali full support including injection
*fsync support
*kcal
More and more featured to be yet to added which u see in future builts.
Builts are weekly or Sometimes after 2-3 Days
Procedure :-
* Boot into recovery (twrp recommended)
* Wipe cache and dalvik cache
* Flash AnonymousVxx.zip
* Reboot to system
* Done ...Profit
*use KaMod to Edit Freq
Download links are in second post
For Feature Requests Open this :- http://forums.yuplaygod.com/threads/anonymous-kernel-v3-02-02-mm-n-nethunter-hotspot-fixed-f2fs-yu-yu-volte-fixed-daily-use.47130/page-8#post-770498
Credits:-
@Sushant More
@Rakesh Batra
@Prasoon Mehra
@Shoaib05
XDA:DevDB Information
Anonymous Kernel, Kernel for the YU Yureka
Contributors
skull(nj)
Source Code: https://github.com/AnonymousKernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 4.2
Stable Release Date: 2017-03-13
Created 2017-03-15
Last Updated 2017-03-14

Changelogs And Download Links:-
Version1----->
Changelogs:-
*Initial release
*Thunderharge cabability
*Tcp controls
*added darkness(optimised)
*arch power optimizations
*dts sound support
*optimizations for A53/ARMv8 architecture
*added powersuspend
*optimised the interactive governer
*thermal optimizations
*optimizations to gpu
*hotspot fixed
Download link(v1):->https://drive.google.com/file/d/0Bx81asNJnm2Ba005ckRNVjhBSDA/view?usp=drivesdk
Version1.1(bug fix)->
Changelogs
*added f2fs
*upgrade linux to 3.10.104
*add zram optimizations
*reboot issue fixed[/SPOILER]
Download link(v1.1):->https://drive.google.com/file/d/0Bx81asNJnm2BSGRZdHpzYzFGc2s/view?usp=drivesdk
Version2:->>>>
Changelogs:->
*Ka mod compatible
*State notifier
*alucard hotplug
*Kali full support including injection
*And many more optimization
Download link(v2)latest:->
https://drive.google.com/file/d/0Bx81asNJnm2BLXprOE5hVGdHamc/view?usp=drivesdk
Version3:---->
Changelogs+Download links:->
http://forums.yuplaygod.com/threads...olte-fixed-daily-use.47130/page-6#post-766805
Version4.1---->
Changelogs And Download
http://forums.yuplaygod.com/threads...lte-fixed-daily-use.47130/page-16#post-796225
Latest update (4.2)
http://forums.yuplaygod.com/threads...lte-fixed-daily-use.47130/page-21#post-798608
Join our telegram group:- https://t.me/joinchat/AAAAAEFJundmJTpMEFvp-g

What's the difference between Anonymous 4.2 tomato and Anonymous 4.2 wba tomato ?
Sent from my Lenovo A6000 using Tapatalk

Prince153 said:
What's the difference between Anonymous 4.2 tomato and Anonymous 4.2 wba tomato ?
Click to expand...
Click to collapse
Wba don't have bootanimation

Hi i use anonymous v2 on santoni and i don't now if u are the maintainer can u add full Kali to it like yu 4g

[KERNEL][7.1.2] Skatter Kernel-v2 SM-G530P/T/T1/W - 11/21/2017

[size=+1]Welcome to Skatter Kernel forum.[/size]
Today I am very proud to release the Skatter Kernel to you guys, I am going to the my best to base this off of my d2spr kernel.
Features
* Cortex-A53 & Neon optimizations
* Compiled with a cortex-a53 optimized Uber-TC 7.x
* CPU OC to 1612Mhz
* GPU OC to 650Mhz
* Set to Permissive
* Net Speed Tweak
* Decreased time to enter deep sleep
* Quick Wakeup Driver
* Optimized Square Root Algorithm
* Screen Tweaks for filling blank spots with more color
* Adreno Idler v1.1
* Simple GPU Governor
* Fast Idling of Cpus
* Kernel Hz is set to 300
* State Notifier driver
* CPU Unaligned access for better performance
* Enabled Arch_Power for better battery life
* Disabled Samsung's touchboost (Because what would be the point of the governors, right?)
* A good amount of debugging disabled for better battery-life & performance.
* RAM booster on screen-off
* Added a tweak so powersuspend & state_notifier play nice with each other :good:
* Sysfys interface for arch_power & gentle_fair_sleepers (Enable/disable in Kernel Adiutor)
* Performance tweaks
* PDesire Audio 10.1 for very clear audio.
* Fixed a BUNCH of load average. For less CPU cycles. (Improves battery-life)
* Power Efficient Workqueues.
* Ultra Kernel Same Page Merging, to help out a little since we have very little RAM.
Faux123's Features
* Fauxsound version 3.5
* Powersuspend v1.7 modified by me.
* KCAL v2 by Savoca
I/O Schedulers
* BFQ
* CFQ
* Deadline
* Fifo
* FIOPS
* Maple
* Noop (Default)
* Row
* Sio
* Sio-Plus
* TripNDroid
* VR
*Zen
TCP Congestion Algorithm
* Bic
* Cubic
* Highspeed
* Htcp
* Hybla
* Illinois
* LP
* Reno
* Scalable
* Vegas
* Veno
* Westwood (Default)
* Yeah
Hotplugs
* Intelli_Plug v5.2 (Enabled by default)
* Thunderplug v5.4
* AutoSMP
* MSM_Hotplug
* Mako Hotplug
* Bricked Hotplug
* Zen Decision
* Disabled msm_performance
CPU Governors
* Blu Active
* Chill
* Conservative
* Despair
* Interactive (Removed useless crap)
* Lionfish
* Ondemand
* Performance
* Powersave
* Relaxed
* Skateractive
* I will add more when I have time, do not worry my fellow xda members! *
Instructions
1.) Make... a... [size=+1]BACKUP[/size]
* For this kernel, it would just be the boot partition.
2.) Download kernel & copy it to sdcard/internal storage
3.) Select "Install Image" then flash boot.img
4.) Optional, but you'd have to download any root method zip, as the boot.img removes root.
5.) Most importantly, Enjoy :good:
Downloads
Right Here
* If anyone needs a mirror link, just ask and I will upload
Modded Kernel Adiutor
Right Here
Contributors
* A special thanks to @vince2678 for letting me use his kernel source and for his OC GPU & CPU patches
@faux123 for all his awesome features
@neobuddy89 for helping me out with the blu_plug driver
Disclaimer:​
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
*Bugs*​
Code:
* You tell me!
XDA:DevDB Information
Skatter Kernel for Grand Prime, Kernel for the Samsung Galaxy Grand Prime
Contributors
Lonelyskatter12, vince2678
Source Code: https://github.com/vince2678/android_kernel_samsung_msm8916
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2017-04-25
Created 2017-04-25
Last Updated 2017-11-21

SM-G530T: boots fine and I like the features you've added in. Only bug so far is that WiFi doesn't work. It just won't turn on.

L3R0N said:
SM-G530T: boots fine and I like the features you've added in. Only bug so far is that WiFi doesn't work. It just won't turn on.
Click to expand...
Click to collapse
That's weird? What ROM are you running

Lonelyskatter12 said:
That's weird? What ROM are you running
Click to expand...
Click to collapse
LOS 14.1 build 20170409. You're on 7.1.2 but the build I'm using is still 7.1.1. There aren't any builds more recent than 0409 for the TMO as far as I see.

I would like it to be compatible also for LOS 13.0

L3R0N said:
LOS 14.1 build 20170409. You're on 7.1.2 but the build I'm using is still 7.1.1. There aren't any builds more recent than 0409 for the TMO as far as I see.
Click to expand...
Click to collapse
They took the 04142017 build down? I'll see if I can upload it for you later
shente99 said:
I would like it to be compatible also for LOS 13.0
Click to expand...
Click to collapse
I'll see what I can do ?

Wifi error detected Does not connect to the wireless network I'm testing on samsung grand prime g530t1.:fingers-crossed:

Does not boot on XCU G530H running stock 5.0.2... stuck at samsung logo

Welcome to the community!
Good work.

shente99 said:
Wifi error detected Does not connect to the wireless network I'm testing on samsung grand prime g530t1.:fingers-crossed:
Click to expand...
Click to collapse
Reverted back to linux 3.10.49, build will be up later hopefully that fixes it for you guys.
tasnim_tamim said:
Does not boot on XCU G530H running stock 5.0.2... stuck at samsung logo
Click to expand...
Click to collapse
Wrong phone bruh...
Has.007 said:
Welcome to the community!
Good work.
Click to expand...
Click to collapse
And thank you :highfive:

Is the kernel compatible for 7.1.1 and 7.1.2 ??
---------- Post added at 01:21 AM ---------- Previous post was at 01:19 AM ----------
Is the kernel compatible for 7.1.1 and 7.1.2 ??

Reverted back to linux 3.10.49, Lots of new stuff added in enjoy guys.
Please don't be ignorant this is only for SM-G530P/T/T1/W

SM-G530T: WiFi still not working.

I need the last actI need the latest update 14.1 20170414 gprimeltemtr, how can you facilitate it ??:crying:

Lonelyskatter12 said:
Reverted back to linux 3.10.49, Lots of new stuff added in enjoy guys.
Please don't be ignorant this is only for SM-G530P/T/T1/W
Click to expand...
Click to collapse
The wifi issue has to do with a change in the wifi driver from being modular to being built in. Wifi not working for people is not your issue, it's a problem with people running old builds of the ROM.

It will be because I have a previous rom and I need to update, what happens I do not get the updates via ota, nor by the server jenkins ..I'm in the rom 14.1-20170409-nightly-gprimeltemtr_7.1.1 ...

Skatter will have the April 30 kernel?

@Lonelyskatter12 why don't you use AnyKernel instead of boot.img?
It's better and it doesn't touch the ramdisk at all

naimrlet said:
@Lonelyskatter12 why don't you use AnyKernel instead of boot.img?
It's better and it doesn't touch the ramdisk at all
Click to expand...
Click to collapse
Device doesn't support it, it'll boot straight into download mode after flash.

Lonelyskatter12 said:
Device doesn't support it, it'll boot straight into download mode after flash.
Click to expand...
Click to collapse
Any hope for an update to make this compatible with latest builds? It still works except WiFi will not work since they reverted to using modular WiFi as opposed to the built in WiFi module of previous builds.

[KERNEL][PHOENIX][10 & 11] Optimus Drunk Kernel v11.25 [4.14.228][30-03]

Optimus Drunk Kernel for POCO X2/Redmi K30​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
- Updated to latest Linux kernel tag
- Built with latest AOSP clang
- AnyKernel3
- Wireguard support
- Spectrum Support
- Shadow Call Stack
- Wakelock blocker
- KLAPSE Support
- Westwood (default) & BBR TCP
- Sio, Fiops, Zen & Maple (default) I/O Schedulers
- Optimisations from other kernels
Download:
Github
FK Manager config
Installation:
Dirty flash your rom if you have another custom kernel installed
Flash the zip in TWRP or FK Manager and reboot, that's all
XDA:DevDB Information
Optimus Drunk Kernel for POCO X2, Kernel for the Xiaomi Poco X2
Contributors
GtrCraft
Source Code: https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix
Kernel Special Features:
Version Information
Status: Stable
Created 2020-03-30
Last Updated 2020-09-11

Download link and instructions please.
EDIT: Got it, thank you so much.

GtrCraft said:
Optimus Drunk Kernel for POCO X2/Redmi K30​​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
- Built with Clang 10.0.4
- AnyKernel3
- MIUI compatible
- Wireguard support
- Wakelock blocker
- Westwood TCP
- Sio, Fiops, Zen & Maple (default) I/O Schedulers
- Optimisations from other kernels
Downloads:
Android 10:
FK Manager config
Github
Installation:
Dirty flash your rom if you have another custom kernel installed
Flash the zip in TWRP or FK Manager and reboot, that's all
XDA:DevDB Information
Optimus Drunk Kernel for POCO X2, Kernel for the Xiaomi Poco X2
Contributors
GtrCraft
Source Code: https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix
Kernel Special Features:
Version Information
Status: Beta
Created 2020-03-30
Last Updated 2020-03-30
Click to expand...
Click to collapse
Very good, X2 development is just taking off now.

I flashed it with MIUI.eu 11.0.13. Will give feedback later ??
Update : after a whole I realised that my screen won't turn of during calls & voice notes. It's all fixed after I flashed back the stock kernel. Not sure what's the problem but I hope you can take a look at it ?

Beta 2 is here:
https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix/releases/tag/b2
Changelog:
Rebased on AOSiP kernel
Fixed proximity sensor
Made kernel zip smaller

hoodlumfird said:
I flashed it with MIUI.eu 11.0.13. Will give feedback later
Update : after a whole I realised that my screen won't turn of during calls & voice notes. It's all fixed after I flashed back the stock kernel. Not sure what's the problem but I hope you can take a look at it
Click to expand...
Click to collapse
Fixed in the just released beta 2

GtrCraft said:
Fixed in the just released beta 2
Click to expand...
Click to collapse
I flashed beta 2 & I noticed autobrightness works veryy well unlike before. Proximity sensor works well also. Not to forget that beta 2 feels buttery smooth (it was a bit laggy with beta 1)
Thank you for you hard work keep it up ??

I understand yours effort sir, but just heads up that everyone here devloping kernels or roms have their own method of flashing, why this is happening? isn't every dev sync up or they have common recovery through which they can flash things normally. (Not talking abt EU rom users). for arter most of poco users need to flash kernel and then stock recovery. then it will flash and work.. In optimus kernel, it doesnt worked on stock recovery but its stuck on boot logo and again i flash fake twrp of K30 and then i flashed my stock rom and your kernel and it worked. even arter rom has different flashing technique and other devs for roms have other flashing techniques.
So may I know why everyone have different techniques here to flash? its quiet time consuming and we need to research on how to flash it and make things work.

Hard_Rock83 said:
I understand yours effort sir, but just heads up that everyone here devloping kernels or roms have their own method of flashing, why this is happening? isn't every dev sync up or they have common recovery through which they can flash things normally. (Not talking abt EU rom users). for arter most of poco users need to flash kernel and then stock recovery. then it will flash and work.. In optimus kernel, it doesnt worked on stock recovery but its stuck on boot logo and again i flash fake twrp of K30 and then i flashed my stock rom and your kernel and it worked. even arter rom has different flashing technique and other devs for roms have other flashing techniques.
So may I know why everyone have different techniques here to flash? its quiet time consuming and we need to research on how to flash it and make things work.
Click to expand...
Click to collapse
I can't change the way others want you to flash kernel or rom.
But for me you can use the Redmi K30 twrp from xiaomi.eu of Franco Kernel Manager as stated in OP, it doesn't matter.
And it doesn't matter which recovery you have.

Update time:
https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix/releases/tag/b3
Changelog:
-Updated Wireguard to 1.0.20200401
-Added KLAPSE & Force Fastcharge (Disabled by default)

Can you add exfat support? Thanks

时光477 said:
Click to expand...
Click to collapse
That will happen, but when I don't know as I am waiting for a better source to use

Update:
https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix/releases/tag/b4
Changelog:
-Updated Wireguard to 1.0.20200413
-Removed Force Fast Charge
-Add ExFAT & BBR TCP
-Built with Clang 10.0.6

First stable release:
https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix/releases/tag/v10.0
Changelog:
-Rebased on Arter kernel bringup
-Updated to 4.14.176
-All features are still here

Its works on miui latest 11.07 (rooted)?

fromjeet said:
Its works on miui latest 11.07 (rooted)?
Click to expand...
Click to collapse
Read the OP

not able to download from fkm

Update:
https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix/releases/tag/v10.1
Changelog:
* Updated to 4.14.177
* Added some powersaving features

GtrCraft said:
Update:
https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix/releases/tag/v10.1
Changelog:
* Updated to 4.14.177
* Added some powersaving features
Click to expand...
Click to collapse
In custom roms when touch power button to lock it selects first item like dialer can u check it

vny10 said:
In custom roms when touch power button to lock it selects first item like dialer can u check it
Click to expand...
Click to collapse
It's a known issue related to the vendor, not the kernel.