[ROM][UNOFFICIAL][MARSHMALLOW][Lenovo A3300]CM13 for A3300 - A3000 Android Development

THIS IS FOR A3300
Code:
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Brief Description: This firmware has been gathered from the latest source code. No editing apps after the assembly, I did [OTA] [From Mr. WigLeg (4PDA)]! Updated security patches, based on 6.0.1_r66 (The September update), every detail firmware adapted to the device, no edits, applications editing and so on. And again, this is a completely new, clean, and not and edited CyanogenMod 13, moreover, it is not a port! ( I just copy it and try to make everyone understands )
[*] Build from the latest source
[*] Based on the latest versions of Android 6.0.1_r66;
[*] Security update (6 September 2016)
[*] Boot animation and other tweaks just under 160 dpi resolution
[*] OTA provided by Mr. WigLeg (4pda)
[*] The memory card is built-in: no need to format it
[*] Onlt three languages: English, Russian, Ukraїnska! This firmware weighs only 266.3 MB
[*] ... and much more!
BUGS :
VPN (there is a temporary fix below)
Can't play 720p60 (it just hang), just play 720p
Screen recording
(For HV) Cant switch 2g/3g directly. Just change it in Setting -> System Profiler -> (The GEAR icon) -> Preferred Network Type
SCREENSHOTS :
INSTALLATION :
1. Download and install recovery.
2. Download the firmware patch (ALWAYS!) And GApps (Google Apps) below. Clicking "Download Google Apps", you will see a lot of choices for every line of their own. I will help you choose the right. Below the "Platform" select: ARM, under the line "Android": 6.0, and below the line "Variant" you can choose from Pico to the Mini because all of the above It will not be installed. After that, click on the red button below.
3. Downloads? Excellent! Reboot in recovery.
4. Set up TWRP Recovery (if configured, go to step 7): After the first run put a check on the slider to the right.
5. Go to "Settings -> LANGUAGE". Flipping to the bottom of the penultimate and the language is "English". Select it and click the "Set Language". (Ignore if already English)
6. Select the time zone (optional): Go to "Settings -> Time Zone". There, select your time zone and click "Set. Time zone."
7. We click "Backup";
8. Select the NVRAM (If you want to copy the full system, including applications, etc., Then select all the items, except for the "System Image", as it will make a second backup of one and the same system, and 1 GB of nowhere is not very cool ).
9. Choose where we keep the backup by clicking "Select storage." Personally, I recommend a backup to a memory card. Click "OK" and carry on the slider.
10. After the return to the main menu by clicking on the house in the navigation bar.
11. Click "Clear".
12. Spending on the slider. It is after all this action is removed, except the system of internal and external memory.
13. Go back to the main menu and click "Install".
14. We are looking for where you downloaded the firmware patch and. If you have not changed the download location, they will be on the way: "/ sdcard / Downloads". If you have moved them to the memory card, you will follow to follow the path: / external_sd. I hope you realize that the / sdcard - internal memory and / external_sd - the REAL memory card/sd card
15. Once you have found the firmware patch and GApps, you first need to select "cm-13.0-20160910-UNOFFICIAL-A3300.zip" file, then we click the "Add More Zips" and select patch "SDCard_as_default.zip", if you downloaded GApps, then again click on the button "Add More Zips", choose franca and hold on the slider, and if only downloaded the firmware and patch is not clicking "Add another Zips' second time spend on the slider.
16. After the installation, click "Restart the system.".
17. Done! We are waiting for system boot and then configure.
[A Temporary fix for VPN]
A workaround for VPN follow these steps :
1. Go to psiphon and choose Browser-Only mode don't tunnel whole device.
2. Go to its logs tab and check the port of http proxy.
3. Now open WiFi setting and long press to your WiFi network (from which u are connected) go to modify tab and from check the advanced options.
4. Chosen manual proxy option and put host name as 127.0.0.1 and port as the no. which you noted in step 2 (eg. 8080) and click save .
Enjoy you have set up a VPN connection successfully.
You can open your browser and check your IP
Note: You have to undo this after you don't need VPN by changing manual proxy to none .
- Suraj Rawat (nervehammer) : thanks man
For those who want to use Orbot vpn
This is very similar to previous vpn workaround for psiphon
Just follow these step for Orbot
1. Open Orbot and long press to start orbot.
2. When all bootstrapped done go to check browser it will ask for normal browser or install Orweb .
3. Open Orweb and volla you r connected to tor but actually its not to tunnel your traffic to vpn go to Orweb settings.
4. Now note the proxy host and proxy port generally it is localhost(same as 127.0.0.1) and 8118 respectively but it may change so better to keep updated with port numbers.
5. Now go to wifi setting and long press the wifi (from which u r connected) and check advanced options.
6. Choose manual proxy option and put the host name 127.0.0.1 and port no. (e.g. 8118 ) which u noted in step 4
Now u can check https://check.torproject.org from any browser and volla Congo this browser is configured to use tor.
Sorry for long guide but it is detail enough so that anyone can easily setup tor in cm builds.
Note: You have to undo manual proxy option to none after you don't use vpn.
- Suraj Rawat (nervehammer) : thanks man
Credits : mtkroms.com that has a fix for almost every mtk issue
http://www.mtkroms.com/2015/11/fix-bugs-in-all-cyanogenmod-12-roms-mtk.html
Patch (MUST FLASH) :
https://drive.google.com/file/d/0B1m5O8azp0IbZXVRUWt5S0NBaHM/view
Download :
cm-13.0-20160910-UNOFFICIAL-A3300.zip
Credits to:
MrWigLeg (4pda)
lol_max_lik (4pda)
waditel (4pda)

Uhm... this ROM is for Lenovo A3000 or Lenovo A3300 (version WiFi or 3G) ?
Thank you

pickmod said:
Uhm... this ROM is for Lenovo A3000 or Lenovo A3300 (version WiFi or 3G) ?
Thank you
Click to expand...
Click to collapse
It is already stated at the top of the post. ''THIS IS FOR A3300'' And this is for the GV (2g) and the HV (3g). Not the wifi version.

GREAT JOB SIR!!!!. Gonna test it on my A3300 GV

Aimer663 said:
GREAT JOB SIR!!!!. Gonna test it on my A3300 GV
Click to expand...
Click to collapse
Remember that without the patch you will not see your internal storage

naimrlet said:
Remember that without the patch you will not see your internal storage
Click to expand...
Click to collapse
And it is not me who making the rom

Is the patch available any soon?Does mirroring the internal storage onto the sdcard and formatting make the internal storage usable? Thanks in advance.

premcharan said:
Is the patch available any soon?Does mirroring the internal storage onto the sdcard and formatting make the internal storage usable? Thanks in advance.
Click to expand...
Click to collapse
I dont know... Because the patch still unavailable

naimrlet said:
I dont know... Because the patch still unavailable
Click to expand...
Click to collapse
Ya I checked at 4pda. No luck. Do you know any stable marshmallow rom for this device or any that has VPN working, This tablet really needs an upgrade the ghost touch plus KitKat is just a pain.

hi, ihave an a7-30dc (which should be a3300) can i just flash it and have no problems? And can u give me link for twrp on this tablet please?

SDCard as default
Hello, my friends! Maybe, you do not know, who did this ROM. Yes, I'm. I see, patch not available. That's why external storage not available.
I'm Ukrainian, that's why my English not very good, Oh...
And that's why I'm here. This patch will did your SD Card as internal storage, but real internal storage will be hidden (/data/media/0). Apply the patch and enjoy the ROM!
Sorry, but i can't send the URL. I'll contact the author.

MrWigleg said:
Hello, my friends! Maybe, you do not know, who did this ROM. Yes, I'm. I see, patch not available. That's why external storage not available.
I'm Ukrainian, that's why my English not very good, Oh...
And that's why I'm here. This patch will did your SD Card as internal storage, but real internal storage will be hidden (/data/media/0). Apply the patch and enjoy the ROM!
Sorry, but i can't send the URL. I'll contact the author.
Click to expand...
Click to collapse
Well yes,we are waiting for the patch,the patch has been down for a while.

Patch now available! MrWigleg just sent me the link. THANKS MRWIGLEG!! :victory: :fingers-crossed:

MrWigleg said:
And that's why I'm here. This patch will did your SD Card as internal storage, but real internal storage will be hidden (/data/media/0). Apply the patch and enjoy the ROM!
Click to expand...
Click to collapse
Oh... Sorry Google translate it a little bit weird

naimrlet said:
Oh... Sorry Google translate it a little bit weird
Click to expand...
Click to collapse
Sorry, but it is my English skill...

MrWigleg said:
Sorry, but it is my English skill...
Click to expand...
Click to collapse
That's okay

naimrlet said:
That's okay
Click to expand...
Click to collapse
One question: System Updates works?

mitko7411 said:
hi, ihave an a7-30dc (which should be a3300) can i just flash it and have no problems? And can u give me link for twrp on this tablet please?
Click to expand...
Click to collapse
No you cant flash this because lenovo a7-30dc is lenovo tab 2 a3300 but this is for lenovo tab a3300 ONLY

MrWigleg said:
One question: System Updates works?
Click to expand...
Click to collapse
Wait for a while because i re-download the rom

MrWigleg said:
One question: System Updates works?
Click to expand...
Click to collapse
Yep its working. Downloading....

Related

[ROM][AOSP] Jelly Bean 4.2.1 [JOP40D][Dec 15,2012][Codename newcomer]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello Nexus S'ians
I'm here attempting to compile Jelly Bean 4.2.1 Build JOP40D from Android Open Source Project (AOSP). This thread is created to provide you people with the change logs, downloads, Instructions, bug submissions and development updates. So, kindly take over your ROM discussions to the Discussion thread under General Section, no appreciation posts or discussions are accepted here. If you like to appreciate, please press the THANKS button instead. Proceeding now towards the main content of this ROM. :angel:
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
General Info & Introduction
Android Open Source Project: Or in short AOSP. Android is an open-source software stack created for mobile phones and other devices. The Android Open Source Project (AOSP), led by Google, is tasked with the maintenance and further development of Android. Many device manufacturers have brought to market devices running Android, and they are readibly available around the world.
Rooting: Android rooting is the process of allowing users of smartphones, tablets, and other devices running the Android mobile operating system to attain privileged control (known as "root access") within Android's subsystem. Rooting is often performed with the goal of overcoming limitations that carriers and hardware manufacturers put on some devices, resulting in the ability to alter or replace system applications and settings, run specialized apps that require administrator-level permissions, or perform other operations that are otherwise inaccessible to a normal Android user.
Fully Functional Features:
RIL (Calls, data and texts)
Wifi
Bluetooth
Touch UI
Contacts
Browser
Lockscreen
Settings
Notification drawer and toggles
Gallery
Camera
Quick Toggles
Click to expand...
Click to collapse
NOTE: This ROM is now not pre rooted, the root support has been removed. If you will to root, download the SuperSU package too and flash it after flashing the ROM and Gapps zip packages successfully.
Change logs
Dec 10, 2012
Fixed Settings storage force close
Fixed Lockscreen clock cut (misplaced clock)
Fixed lag while launching an app
Dec 12, 2012 [Codename: newcomer]
Fixed Daydream FC
Added Rotation to Quick Toggles
Quick Settings: Make Wifi and Bluetooth Turn on and off. Short press turns on and off, long press goes to settings service
Implemented Darkone Kernel
Added HSPA Support
ARM TARGET_GCC_VERSION Change 4.6 to 4.7
Dec 15, 2012 [Codename: newcomer]
Fix for save_postview changes - Cyanogenmod
Add 3way reboot and screenshot options to power menu
Support HWA (I'm stupid)
Increase media volume threshold from 15 to 30
Added missing application
Click to expand...
Click to collapse
Instructions to Install
Download the latest ROM zip and Gapps from the download tabs above.
Connect your Nexus S into USB Storage mode to the PC via USB data cable.
Drag the downloaded two zips to the root of your storage (and not in any folder).
Power off the device, press volume up + power buttons altogether until you see the bootloader mode. Now use the volume buttons to highlight "Recovery" and select it using power button.
You are now in Recovery mode.
If you are flashing this ROM for the first time (coming from another ROM): wipe /data (factory reset) and /system
If you are updating this ROM (coming from previously installed version of this ROM): wipe /cache
"Install zip from sdcard" > "choose zip from sdcard" > select the ROM zip and press "Yes" to flash.
Follow the above step again to flash the Gapps.
When all is done, select "reboot system now".
Click to expand...
Click to collapse
Want to report a bug? Read this first!
The below stated format shall be strictly followed to report any bug related to this specific ROM. Make sure that you have not overclocked over the provided CPU frequency and also that you are not running any custom kernels. Such bugs will be subjected to ignorance
Bug submission should majorly be done at the Bug Tracker.
Build Date / Release version: Eg. Dec 10, 2012
Bug Description: Describe the bug in English and as in-depth as possible.
How to reproduce the bug: Describe the instructions to reproduce your bug, so that I can confirm that its universal
Logcat: A logcat is considered very necessary during a bug report and will help me solve the bug at a fast rate. So, provide a logcat to your bug if possible.
Click to expand...
Click to collapse
Big Thanks
DJBhardwaj : Many helps
Credits & Thanksgiving
Google: For Android Origin
CyanogenMod: For its resources and brilliance
Greenblue: For providing an helping hand
eddy_nugroz: For reporting the bugs
ok will try
Thanks :good:
hello !!! nice i want to try this !!! can you upload to different link please ?
leap_ahead said:
hello !!! nice i want to try this !!! can you upload to different link please ?
Click to expand...
Click to collapse
now im uploading mirror
Please wait a little
Only English , or even Italian language?
lukappaseidue said:
Only English , or even Italian language?
Click to expand...
Click to collapse
Support almost all languages​​.:fingers-crossed:
leap_ahead said:
hello !!! nice i want to try this !!! can you upload to different link please ?
Click to expand...
Click to collapse
New link
http://www.mediafire.com/?e1b73zjrds6mpb4
- setting storage FC
- lockscreen clock cut
-.....
same as JB 4.2.1 build other
look here guide to fix that http://forum.xda-developers.com/showthread.php?t=2001684
eddy_nugroz said:
- setting storage FC
- lockscreen clock cut
-.....
same as JB 4.2.1 build other
look here guide to fix that http://forum.xda-developers.com/showthread.php?t=2001684
Click to expand...
Click to collapse
Thx to help
i will fix soon
Have a great day :good:
bluetooth prevent deep sleep ...
leap_ahead said:
bluetooth prevent deep sleep ...
Click to expand...
Click to collapse
Error fixed
Thx :fingers-crossed:
leap_ahead said:
bluetooth prevent deep sleep ...
Click to expand...
Click to collapse
1. Fix bluetooth deep sleep
2. Settings storage fc fix
3. lockscreen clock cut fix
4. Remove lag when launching an app
Thx to report
new link ?
leap_ahead said:
new link ?
Click to expand...
Click to collapse
http://www.mediafire.com/?6uo66l7a7bzo9pk
htchoi5609 said:
1. Fix bluetooth deep sleep
2. Settings storage fc fix
3. lockscreen clock cut fix
4. Remove lag when launching an app
Thx to report
Click to expand...
Click to collapse
Check greenblue info/ROM thread. He can help you fix some issues.
Sent from SpeedMachine i9023
What is the difference between your ROM and Xylon port ? I found your name in both ...
Good job mate, downloading as I write. Keep up
Sent from my Nexus S using Tapatalk 2
He is our team
Thx have a great day
htchoi5609 said:
Thx have a great day
Click to expand...
Click to collapse
Have a look at your PM Inbox my friend
Sent from my Nexus S using Tapatalk 2

[MOD] [OFFICIAL] Dual Boot Patcher [SNAPSHOT] [KENZO]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dual Boot Patcher
Supports all Android Versions
(Even MIUI works)​
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
What is Dual Boot Patcher?
DualBootPatcher is an open-source app that allows multiple ROMs to be installed on a single Android device. It does its best to work with existing code and does not require explicit support from ROMs. There are currently 136 supported devices and their variations.
**I am not the developer of this MOD. The credit for this goes to the actual developer of this MOD.**
Download:
https://dbp.noobdev.io/downloads/
BUGS:
No BOOT UI support yet.
Lock screen shows incorrect pattern every time after installing other ROMs.(Patch below)
**Don't forget to put screen lock to slide or none before booting to other ROMs as it will not allow you to unlock your device on the lock screen after you reboot to another ROM. Even if you enter the correct pattern, it will show that it's wrong(more about the lock screen patch below). Please read the "Lock Screen Patch" Section below before starting the procedure.
Procedure:
Download the APP and the Utilities ZIP from the link.
Install the APP.
Set/Update the kernel when asked.
Choose "Patch Zip File" from the left pane.
Choose "Add flashable zip" by clicking on the "+" button.
Select ROM installation directory in the Partition configuration. (Data Slot/Extsd slot recommended)
Select the location for the patched image file.
Add GAPPS and kernel (more about kernel flashing below) files as needed.
Go to the ROMs section from the left pane and select In App Flashing(bottom right corner).
Choose Add patched file by clicking on the "+" button.
Select the patched Zip files and accordingly select "keep location" or "change location".
Go ahead and flash the ZIPs.
Now you can choose between the installed ROMs and select which one to boot from.
You can also share your apps among your ROMs using the "App Sharing" menu in the left pane.(Note that once you select apps for sharing, the app data will be wiped for those apps once.)
The Utilities ZIP is a flashable zip in the recovery which is based on AROMA installer which provides basic dual boot system modification tools like changing the current boot ROM or wiping a ROM etc. It is very useful when your device is in boot loop or you want to change your boot ROM using the recovery.
YouTube Tutorial:
https://youtu.be/T44ifBaHAWs
MIUI:
As MIUI encrypts data partition, ROMs on it won't be able to boot up.
Follow this guide to make data partition accessable.
Then install other ROMs as usual on the data-slot.
Kernel Flashing:
Flashing ZIPs based on AROMA installer is not allowed via "In App Flashing".
Patch the Kernel ZIPs by selecting the exact installation location of the kernel in the Dual Boot Patcher App.
Then flash the patched ZIPs in the Custom Recovery.
Lock Screen Patch:
Booting to other ROMs might not allow you to unlock your device on your first ROM. Either set your lock to none or swipe or follow the instructions below.
Download Agni Toolbox.
Remove lock screen security.
If your non-primary ROM is locked, then patch the Agni Toolbox and then remove security.
Current Status:
MIUI works but only as primary ROM and only with Alka TWRP recovery.
Contributors:
Dual Boot Patcher Team
Source Code: GitHub
@psndna88 for Agni Toolbox.
@srijansaxena11 for YouTube Tutorial.
Version Information:
Status: Sanpshot
Created: 2016-12-31
Last Updated: 2016-12-31
Review Space
Happy new year guys :fingers-crossed:
Thanks,Need to test This ::good:
Edit: tested working Good for N roms,Thanks for this awesome mod
NVDX11 said:
Thanks,Need to test This ::good:
Edit: tested working Good for N roms,Thanks for this awesome mod
Click to expand...
Click to collapse
MIUI works as primary ?
rocknegi said:
MIUI works as primary ?
Click to expand...
Click to collapse
I think it should. Haven't tested it yet. Will tell you soon. It surely doesn't work as additional ROM as Dual Boot Patcher doesn't create a fake "cust" partition which is necessary to flash an MIUI ROM.
There is some problem with app,whenever i try to flash rom in background as soon as i switch to the app from recents it crashes.
@rocknegi haven't tested Miui,So don't know.
My zip patching don't work always patched zip 0b
NVDX11 said:
There is some problem with app,whenever i try to flash rom in background as soon as i switch to the app from recents it crashes.
@rocknegi haven't tested Miui,So don't know.
Click to expand...
Click to collapse
sarveshrulz said:
My zip patching don't work always patched zip 0b
Click to expand...
Click to collapse
In App Flashing and Patching both won't work in background as the mbtool works only in foreground till now. Keep the app open. The Dual Boot Patcher's background service is still not completely bug free.
vinayak.s19 said:
In App Flashing and Patching both won't work in background as the mbtool works only in foreground till now. Keep the app open. The Dual Boot Patcher's background service is still not completely bug free.
Click to expand...
Click to collapse
I don't close the app its always in foreground while patching
sarveshrulz said:
I don't close the app its always in foreground while patching
Click to expand...
Click to collapse
Please explain in detail about your procedure.
Did you choose any of the Multi Slots as partition configuration?
I can’t make this mod work with MIUI as the primary ROM. When I try to boot a secondary ROM, I always end up in recovery. I tried unofficial LineageOS by minz1 and AOSP by JDCTeam.
Edit: I never had any problems booting back into MIUI. My PIN is still fine.
Edit 2: It might be worth noting that I’m using the latest official Global Developer ROM and ZCX TWRP. Perhaps, it would work with a Xiaomi.EU ROM and the official TWRP.
Edit 3: Nope, it doesn’t work with a Xiaomi.EU ROM either. I also tried using the last CM13 nightly build as a secondary ROM with no luck. So I don’t think it’s possible to use DualBootPatcher with MIUI as the primary ROM. What a pity.
Dual boot patcher for Armani works for MIUI as primary and any other ROM as secondary :3
Maybe see what that dev did
I keep getting 'error code 1' when I try to patch any zip file through the app...Pls help guys.
Filip013 said:
I can’t make this mod work with MIUI as the primary ROM. When I try to boot a secondary ROM, I always end up in recovery. I tried unofficial LineageOS by minz1 and AOSP by JDCTeam.
Edit: I never had any problems booting back into MIUI. My PIN is still fine.
Edit 2: It might be worth noting that I’m using the latest official Global Developer ROM and ZCX TWRP. Perhaps, it would work with a Xiaomi.EU ROM and the official TWRP.
Edit 3: Nope, it doesn’t work with a Xiaomi.EU ROM either. I also tried using the last CM13 nightly build as a secondary ROM with no luck. So I don’t think it’s possible to use DualBootPatcher with MIUI as the primary ROM. What a pity.
Click to expand...
Click to collapse
Use multirom miui 8 as it has system image and probably don't use cust, and in twrp it doesn't shows no os installed while booting so plz try
Save option isn't available
Can't click on it ;_;
rocknegi said:
Save option isn't available
Can't click on it ;_;
Click to expand...
Click to collapse
Your screenshot link is broken. Please fix it.
vinayak.s19 said:
Your screenshot link is broken. Please fix it.
Click to expand...
Click to collapse
See
rocknegi said:
See
Click to expand...
Click to collapse
The image is still not available. Plz add an image, not a thumbnail. If not, then plz upload the screenshot on some cloud storage and share the link of possible.
vinayak.s19 said:
The image is still not available. Plz add an image, not a thumbnail. If not, then plz upload the screenshot on some cloud storage and share the link of possible.
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B210VGRWFHRCNl9MWGlWdFlzX3M/view?usp=sharing

[ROM][10][ARM64][A320] crDroid v6.21 for Galaxy A3 2017 [10.08.2021]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
Features (click here)
Screenshots in the next post.
Flashing Instructions:
Pre-installation & other downloads:
OrangeFox R11.0 (it's MANDATORY) - Download from here
AOSP Repartition script - Download from here
GApps: ARM64 > 10 > Pico - Download from here
Magisk 21.4 or newer for root - Download from here
Installation:
Enter to recovery mode and make a backup of your EFS & Modem (recommend).
Go to the Files tab and flash "Repart-AOSP10-exynos7870-20210810.zip". The recovery will auto-reboot.
Now, go to the Trash Bin and then go to the "Format data" tab, type yes and the tick to format data.
Go to the Wipe tab, select SYSTEM, CACHE, DALVIK, VENDOR, DATA and INTERNAL STORAGE, then swipe the bar.
Install the crDroidAndroid-10.0-xx-xx-v6.xx.zip
Install the GApps zip
Install Magisk (optional)
Reboot and wait. Without GApps, it boot in 15s. With Pico GApps, it boot on 1min 5s.
Done!
Download:
ROM: https://www.androidfilehost.com/?fid=7161016148664783862
Known issues:
- Frontal camera stretched for some apps (Instagram, ZOOM and Snapchat & Whatsapp except videocalls don't have this problem). See second post for more info.
- Frontal Flash
- Bluetooth Calls
- VoLTE
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/
ROM OS Version: Android 10
ROM Kernel: Linux 3.18
IMPORTANT, PLEASE READ THIS
This is a ROM built from source and not a GSI!​
Fix Camera stretch & force close for some camera apps
You can do it editing /vendor/build.prop file using MiXplorer (you’ll need ROOT).
Search for the line “vendor.camera.hal1.packagelist”
After the = are the name of different apps. Delete one of these and put the package name of the app that you want to fix. For example, com.facebook.orca is the Facebook package name.
Per default, the ROM comes with Whatsapp, ZOOM, Snapchat and Instagram added. Maximum 4 Apps are allowed in this line and must be separated by comma ",".
If you don’t understand, open this link to see visual steps.
Fix Camera stuck
Sometimes, the camera can get inaccessible if an app was failed. If it happen, follow this:
Install this app. Open it and tap "Kill camera", then give it ROOT permissions. Done! Camera is working again.
Take in mind that if the camera is broken and you didn't do this, the audio in calls maybe not work.
GCam
This ROM can run GCam. Download a modded version for Exynos HERE. Thanks to Leonardo Estacio for his mod.
Games: this ROM works so good for gaming and can run ARM64 apps/games. If you feel lags, go to Settings > Battery > Battery Saver and performance > Performance Profile and set it to High Performance.
Video Review: if you want to see gaming performance and how this ROM are, you can watch this review video of the ROM in the J7 2016 (the ROM is the same for other Exynos7870 variants):
For close, i want to give a huge thanks to @Astrako - Without him this ROM haven't be possible <3
Also a huge thanks to Peter Schiek for his €50 donation
Changelog:
android_vendor_crDroidOTA/changelog_j7xelte.txt at 10.0 · crdroidandroid/android_vendor_crDroidOTA
OTA configuration for crDroidOTA (make your device official) - android_vendor_crDroidOTA/changelog_j7xelte.txt at 10.0 · crdroidandroid/android_vendor_crDroidOTA
github.com
===== 17-04-2021 =====
- crDroid 6.17
- Fixed Live Display
- Added Night Light
- April Security Patch
- Deleted ConfigStore hal
===== 11-02-2021 =====
- crDroid 6.15 build
- Repartition script updated. Now you can get more userdata space.
- XDA release build
===== 24-01-2021 =====
- Fixed offline charging
- Added vibration intensity control
- Latest crDroid sources (v6.14 with January security patch)
- Initial a3y17lte private build for testing
GonicTEAM said:
Fix Camera stuck
Sometimes, the camera can get inaccessible if an app was failed. If it happen, follow this:
Install this app. Open it and tap "Kill camera", then give it ROOT permissions. Done! Camera is working again.
Click to expand...
Click to collapse
Thanks for your build.
Do you use LineageOS tree for A3 2017 by Martin (@Sap1k) ? Because it doesnt have the problem with camera.
Also crDroid 6.9 by Atrasko doesnt have this problem too. But since 6.12, there is this problem with camera.
Very nice to see a new ROM for the A3.
Did anyone test if bluetooth calls are working correctly and if recorded videos with apps other than Footej, are saved correctly?
SuperDeformed86 said:
Thanks for your build.
Do you use LineageOS tree for A3 2017 by Martin (@Sap1k) ? Because it doesnt have the problem with camera.
Also crDroid 6.9 by Atrasko doesnt have this problem too. But since 6.12, there is this problem with camera.
Click to expand...
Click to collapse
I use Astrako's device trees for crDroid, not LineageOS ones. I will see what was change, thanks!
What is the differenc beetween crdroid 6.15 and crdroid 6.9?
hi,
nice job. The ROM doesn't detect my SIM CARD. How to fix that point? Thanks for any help.
Can i use Twrp to flash this Rom and the cr droid partitionierer
Is adoptable storage something that works on this ROM? The tiny 16GB of internal storage are crippling this otherwise still capable device...
Crim Soukyuu said:
Is adoptable storage something that works on this ROM? The tiny 16GB of internal storage are crippling this otherwise still capable device...
Click to expand...
Click to collapse
It does say in the first page that BT calling is still broken in this ROM.
crDroid is awesome on this phone but the lack of BT calling sucks and I don't think there is developer motivation to fix.
nonsub said:
It does say in the first page that BT calling is still broken in this ROM.
crDroid is awesome on this phone but the lack of BT calling sucks and I don't think there is developer motivation to fix.
Click to expand...
Click to collapse
That's good to know, but I didn't ask about BT...
Hello, on my A3 2017 (a3y17lte), when install crdroid, it says:
Code:
updater process ended with error7
error installing zip file '/external-sdcard/crDroidAndroid-10.0-20210211-a3y17lte-v6.15.zip'
this is with last twrp, because with your orangeFox, i can't intall it, because it is for j7y17lte
yeye.phone said:
Hello, on my A3 2017 (a3y17lte), when install crdroid, it says:
Code:
updater process ended with error7
error installing zip file '/external-sdcard/crDroidAndroid-10.0-20210211-a3y17lte-v6.15.zip'
this is with last twrp, because with your orangeFox, i can't intall it, because it is for j7y17lte
Click to expand...
Click to collapse
It should work with this orangefox.
[OFFICIAL][TWRP][A320FL/F/Y] OrangeFox Recovery Project [R11.0]
DISCLAIMER I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it...
forum.xda-developers.com
LuChaos said:
It should work with this orangefox.
[OFFICIAL][TWRP][A320FL/F/Y] OrangeFox Recovery Project [R11.0]
DISCLAIMER I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it...
forum.xda-developers.com
Click to expand...
Click to collapse
Ok i will try with this Version.I think it's better suited.
isaacragui said:
hi,
nice job. The ROM doesn't detect my SIM CARD. How to fix that point? Thanks for any help.
Click to expand...
Click to collapse
same here...any solutions? Tried different SIM cards and flashed ROM 2-3 times
Cheers @GonicTEAM,
Thanks for the crDroid release, hope to see more updates to this rom.
Tested the rom on a SM-A320F/DS, can confirm what other users have mentioned above, and some others:
SIM slots dont work, tested both slots. Ive added a logcat to the post. SDcard (SIM2 slot) works fine, no issue there.
Settings > Display > LiveDisplay: Cant edit the settings for bluelight filter.
Settings > Display > Lock screen display > Ambient display: To edit Ambient display settings this way does not work, either nothing happens or it jumps back to Display settings. To edit Ambient display settings, have to go through -> Settings > crDroid Settings > User Interface (tab) > Ambient display. Not a huge issue, just fyi.
Camera works fine with the native app, I use OpenCamera though and with the build.prop edit mentioned in 2nd post it works without issue.
Bluetooth/NFC seem to work, though I havent tested in depth due to sim issue.
Wifi works fine aswell, only annoyance is after reboot sometimes aireplane mode is activated and wifi off, even though it was on before reboot. But thats a small issue, not priority.
Phone encryption working aswell, no issue there as far as i can see.
Battery, havent tested per usual usage, though it does drain faster at first look.
Best regards and lookin forward to future releases,
yass
yass said:
Cheers @GonicTEAM,
Thanks for the crDroid release, hope to see more updates to this rom.
...
Click to expand...
Click to collapse
Thanks for the feedback. I don't have this device, but i compile the ROM anyway using the Astrako's device trees. I will try to fix this things if i can.
SuperDeformed86 said:
Thanks for your build.
Do you use LineageOS tree for A3 2017 by Martin (@Sap1k) ? Because it doesnt have the problem with camera.
Also crDroid 6.9 by Atrasko doesnt have this problem too. But since 6.12, there is this problem with camera.
Click to expand...
Click to collapse
GonicTEAM said:
I use Astrako's device trees for crDroid, not LineageOS ones. I will see what was change, thanks!
Click to expand...
Click to collapse
Please dont use this device tree from martin .This Device Tree have the Problem that adobtabel storage dont work
This is very bad for this device because it have only 16gb internal storage
Crim Soukyuu said:
Is adoptable storage something that works on this ROM? The tiny 16GB of internal storage are crippling this otherwise still capable device...
Click to expand...
Click to collapse
my english is not so good
Yes it works but it was disabeld but you can enabeled it with a few commands
1.enabeled devolper options (tap 5 times on build number)
2.enabeled usb-debuging in devolper options
3.install minimal adb and fasboot on your pc
4.start minimal adb and fastboot
5.type adb devices and type yes on the prompt on your phone
6.type adb shell
7.type sm set-force-adoptable true
8.go to setting/storage/sdcard/format as internal storage

[ROM][Huawei][11][UNOFFICIAL] DOTOS - Android 11 for Huawei device

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
" #DroidOnTime "
ROM Version: 5.2
< Your warranty is now void! >
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you​
dotOS is an Android ROM which focuses on performance and stability. We focus on making our rom look and feel great without struggling on Performance and Battery! So that one can get most out of his/her device.....
Changelog :
DOTOS 5.2 December version
Initial build based on dot os 5.2
Integrate NFC, Miracast/cast , Live Display patches
Add media patch (Fix "Error loading media" in social apps like instagram, messenger..)
Pre-requisite :
You must have TWRP installed, use this one (make sure to have the unofficial Android 11 one ! )
You must be decrypted before installing it otherwise it won't boot
Installation :
Download this file : dotOS-R-v5.2
go to TWRP
format data, full wipe (system, data, cache, dalvik/art cache) !
flash this file 1-Huawei-DataPrep-DeCrypt-A-v1.0-signed.zip to change mount data partition (disable FBE : FileBaseEncryption)
reboot to TWRP again
reboot to bootloader
extract the img from dotOS-R-v5.2
run: fastboot flash system <drag system.img here>
reboot to TWRP
resize system
(optional) flash AGPS patch, Google Apps basic version :
1 - Google Apps basic (NikGapps-basic-arm64-11-20201231-signed.zip)
2 - Enable AGPS (7-AGPS-FIX-AltairVendor-v3.6-signed.zip)
reboot to System
(optional) install GCamGo (GoogleCamera_2.12.413042791.apk)
Enjoy !!!
Not Working :
VoLTE
ROM OS Version: Android 11
ROM Kernel: Linux 4.4.x (stock 4.4.26 or Siberia 4.4.280)
ROM Firmware Required: EMUI 8.0.0.360 ---> 8.0.0.402
Based On: DotOS
Credits:
DotOS Team : https://www.droidontime.com/
And all the others who tested my patches and helped me improve this ROM
Support Group
AltairFR said:
" #DroidOnTime "
ROM Version: 5.2
< Your warranty is now void! >
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you​
dotOS is an Android ROM which focuses on performance and stability. We focus on making our rom look and feel great without struggling on Performance and Battery! So that one can get most out of his/her device.....
Changelog :
DOTOS 5.2 December version
Initial build based on dot os 5.2
Integrate NFC, Miracast/cast , Live Display patches
Add media patch (Fix "Error loading media" in social apps like instagram, messenger..)
Pre-requisite :
You must have TWRP installed, use this one (make sure to have the unofficial Android 11 one ! )
You must be decrypted before installing it otherwise it won't boot
Installation :
Download this file : dotOS-R-v5.2
go to TWRP
flash this file Huawei-Decrypt to change mount data partition (disable FBE : FileBaseEncryption)
format data
reboot to TWRP again
do a full wipe (system, data, cache, dalvik/art cache) !
reboot to bootloader
extract the img from dotOS-R-v5.2
run: fastboot flash system <drag system.img here>
reboot to TWRP
resize system
(optional) flash AGPS patch, Google Apps basic version :
1 - Google Apps basic (NikGapps-basic-arm64-11-20201231-signed.zip)
2 - Enable AGPS (2 - AGPS-FIX-AltairVendor-v3.3-signed.zip)
reboot to System
(optional) install GCamGo (GoogleCamera_2.12.413042791.apk)
Enjoy !!!
Not Working :
VoLTE
ROM OS Version: Android 11
ROM Kernel: Linux 4.4.x (stock 4.4.26 or Siberia 4.4.280)
ROM Firmware Required: EMUI 8.0.0.360 ---> 8.0.0.402
Based On: DotOS
Credits:
DotOS Team : https://www.droidontime.com/
And all the others who tested my patches and helped me improve this ROM
Support Group
Click to expand...
Click to collapse
Wrong section bro...
reserved
-Alf- said:
Wrong section bro...
Click to expand...
Click to collapse
Why ?
AltairFR said:
reserved
Why ?
Click to expand...
Click to collapse
Okay, it's your choice. I just think it belongs to the P8 lite (2017) Development section.
-Alf- said:
Okay, it's your choice. I just think it belongs to the P8 lite (2017) Development section.
Click to expand...
Click to collapse
It is not my first choice. I put it in development, but the moderator of the site that moved it here
AltairFR said:
It is not my first choice. I put it in development, but the moderator of the site that moved it here
Click to expand...
Click to collapse
Oh, I see... So ask him to move it to section P8 lite (2017) Discussion. And try to explain to him that P8 lite and P8 lite (2017) are two different phones .
Hi !
I installed DotOS and it's beautiful and it works almost very well.
Here's the almost :
After having used it for a week or so, there is a problem that is hard to past over : my battery is draining soooo quickly, and I think I found the culprit.
The network connexion works fine (sms and data), however it always says that there is no connexion on the status bar :
When I check the power consumption stats, it shows that the networks services is extremely energy consuming.
So here's my hypothesis : even if network works, it's always looking for it as it thinks it is not, and so it power up the network services to look for network, then battery go pfiuuuu
Do you think there is something to do here ?
In any case, thanks for the work !
Hykosit said:
Hi !
I installed DotOS and it's beautiful and it works almost very well.
Here's the almost :
After having used it for a week or so, there is a problem that is hard to past over : my battery is draining soooo quickly, and I think I found the culprit.
The network connexion works fine (sms and data), however it always says that there is no connexion on the status bar :
View attachment 5506203
When I check the power consumption stats, it shows that the networks services is extremely energy consuming.
So here's my hypothesis : even if network works, it's always looking for it as it thinks it is not, and so it power up the network services to look for network, then battery go pfiuuuu
Do you think there is something to do here ?
In any case, thanks for the work !
Click to expand...
Click to collapse
Hello,
I do not own this model and I only have experience with original GSI dotOS ROM, but try one of the following:
- That R, and the description on your homescreen, mean that you are in Roaming mode, disable it in Settings , then try connecting to your provider's network - (disable "Automatically select network") .
- turn Airplane mode on for a few seconds and turn it off
- go to your smartphone's dialer, then type *#*#4636#*#* ~> Phone info . Here you can check the connection in detail and set the network type.
- go: Settings > System > Reset options > Reset WI-FI,mobile & BT. Also you can reset to default APN (Network > mob. network > Access point names )
- reboot stock Recovery and perform Wipe cache partition
@Hykosit, does screen recorder work? When I tried this rom there were some troubles with it(there is separate fix for it though).
hardcorehenry said:
@Hykosit, does screen recorder work? When I tried this rom there were some troubles with it(there is separate fix for it though).
Click to expand...
Click to collapse
I just tried it, and I'm having troubles too :
- start the recording
- tap the notification to stop the recording
- my phone get locked
- unlock and re-tap the notification
- recording stop
- I can't find the record in the gallery
If you have any fix, I'm interested !
-Alf- said:
- That R, and the description on your homescreen, mean that you are in Roaming mode, disable it in Settings , then try connecting to your provider's network - (disable "Automatically select network") .
Click to expand...
Click to collapse
I'm currently in Sweden, that's why ! and I'm not planning to come back soon. However I had the same issue when I was still in France.
I tried any other network and everyone says "couldn't connect".
When I exit the network selection page, the Automatic select network turns on and it tells it's connected to "insert_local_network - insert_my_network_provider"
-Alf- said:
- turn Airplane mode on for a few seconds and turn it off
Click to expand...
Click to collapse
No visible effect.
-Alf- said:
- go to your smartphone's dialer, then type *#*#4636#*#* ~> Phone info . Here you can check the connection in detail and set the network type.
Click to expand...
Click to collapse
So I don't understand a lot of stuff but I tried to chance the network type. It hasn't change anything so far. Here are some screenshot in any case
-Alf- said:
- go: Settings > System > Reset options > Reset WI-FI,mobile & BT. Also you can reset to default APN (Network > mob. network > Access point names )
Click to expand...
Click to collapse
No visible effect
-Alf- said:
- reboot stock Recovery and perform Wipe cache partition
Click to expand...
Click to collapse
No visible effect, apart a bootloop ... trying to fix that (EDIT:done)
Thank you for all your advises !
And tell me if you have any other idea
NOTE :
- I'm having the same problem from 2 clean installations
- once i got a full network indicator when I was on the plane <_<'
Hykosit said:
And tell me if you have any other idea
Click to expand...
Click to collapse
I'm out of ideas.
Try another custom ROM, I would recommend Corvus 17.0, with Elemental-kernel (due to SELinux permissive). Download links ROM Kernel
Or, try some OEM ported ROM by DarkJoker (imo the best solution).
Hykosit said:
I just tried it, and I'm having troubles too :
- start the recording
- tap the notification to stop the recording
- my phone get locked
- unlock and re-tap the notification
- recording stop
- I can't find the record in the gallery
If you have any fix, I'm interested !
Click to expand...
Click to collapse
I made a fix for this problem a few months ago, it was integrated in several ROMs but the dotos is old, look in my patches for the DisplayEngine-FIX-Altair-v0.3 file
J'ai fait un fix pour ce probléme il y a quelques mois, il a été intégré dans plusieurs ROM mais la dotos est ancienne, regarde dans mes patch le fichier DisplayEngine-FIX-Altair-v0.3
Yo !
Despite the new version the following fix doesn't work for me :
Add media patch (Fix "Error loading media" in social apps like instagram, messenger..) - also whatsapp
@AltairFR please help me with my SIM card i tried everything what i could do i downgraded my EMUI. Reflashed EMUI. Installed Siberia Kernel. Flashed Fixes Everything i tried no android 11 GSI works for me i am using an Huawei Nova 2 Plus BAC-L21
Hi
I have post a solution in my telegram group this afternoon
AltairFR said:
my telegram group
Click to expand...
Click to collapse
i have a problem
al3x97 said:
i have a problem
Click to expand...
Click to collapse
Don't use this zip, it is a none sign zip
AltairFR said:
Don't use this zip, it is a none sign zip
Click to expand...
Click to collapse
what use?

[INACTIVE DEVELOPMENT] [GSI] AncientOS for Galaxy A71 (Android 12) [Customization ROM]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER!!​I am just posting this here for Galaxy A71 users to be aware this custom ROM exists. I didn't develop anything nor i contributed with something. All the credit goes to Ancient developers and everyone who had been working on this GSI. I don't want this forum to be a ''copy-paste'' thread.. even if it looks like. Again,i don't take any credits!! If anyone wants to contribute on this to make it better for our device, please contact me.​
Website of AncientOS​
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
​
What is this?​AncientOS - A Custom ROM based on AOSP (Android Open Source Project) CrafetedWithLove. With the Aim To Provide "Performance", "Security" and "Stability", with Multiple Customisation option. So that every User can customise thier phone as per their taste. While you get Best in class Customization options you also get a unique UI without any security Comprimises, Monthly Security patches are merged, Every Update has something new with bug fixes.​
Generic System Images​
'' A generic system image (GSI) is a system image with adjusted configurations for Android devices. It's considered a pure Android implementation with unmodified Android Open Source Project (AOSP) code that any Android device running Android 9 or higher can run successfully.
GSIs are used for running VTS and CTS-on-GSI tests. The system image of an Android device is replaced with a GSI then tested with the Vendor Test Suite (VTS) and the Compatibility Test Suite (CTS) to ensure that the device implements vendor interfaces correctly with the latest version of Android.) ''​
BUGS​- Fingerprint not working​- No MTP inside system / *workaround* reboot to TWRP and transfer data there.​- No Bluetooth Audio
- No audio in calls using SIM2 slot. ( you can't listen or be heard by the caller )​[ USE SIM 1 INSTEAD ]​YOU TELL ME​
- How to -​Download​Download the image from here.​Install​1.Have TWRP set up.​2.In TWRP go to WIPE > Format Data > (type '' yes '') then enter.​(2.5). If you don't have MicroSD then reboot to recovery and use ADB to move image to Internal Storage.​ADB command should look like this : adb push AncientOS.img /sdcard/​3.Copy/Move the .img file to MicroSD​4.Install .img as SYSTEM.​5.Flash NikGAPPS​5.Install Magisk from this link only.​6.Reboot​7.Install Magisk APK ( Rename ''app-debug.zip'' to "app-debug.apk")​​DONE!​
Some TIPS in order to fix some broken stuff and quality of life impovements:​
Google Camera: https://www.celsoazevedo.com/files/android/google-camera/dev-bsg/f/dl61/​Apply this config. :https://www.celsoazevedo.com/files/android/p/f/2021/11/BSG-A71-GV1h.xml​And this LIB https://f.celsoazevedo.com/file/cfiles/gcm1/morgenmanlibv6.so​​
Get fast charging​By default A71 on GSI charges really slow, this enables fast charging for the A71 on AncientOS and any GSI​To install, download this from: https://drive.google.com/file/d/1KguCeLD-VHShm0MYzKhYrsAv-rZAuJeA/view?usp=sharing​Now install the module it will ask you to use volume keys follow the instructions and choose 4500mah 27w. Once installed reboot!​Note: this will not affect battery/ will barely affect battery​
Increase performance without any battery impact or (by feravolt and gloeysik)​
Step 1​- Uninstall ANY OTHER KERNEL MANAGER app including smartpack/Ktweaks to avoid conflict, since this app uses AI and machine learning to dynamically boost performance when needed​​- Install FDE AI Magisk Module to make it a system app, thus it will work better and removes all kernel locks from OEMs (I'm looking at you, Samsung) https://github.com/feravolt/FDE.AI-docs/releases/download/12.4.1m/FDE.AI-as-system-app.MAGISK.zip​​- Update FDE AI to the latest version by downloading the latest APK here, since the fde ai magisk module will only install fde ai 12.4.1, not the latest version: https://github.com/feravolt/FDE.AI-docs/releases​​- Move to the bottom of the screen and select AI Chat, then type /advancedai (no space, no uppercase letters). This will going to make the AI more effective, without you having to do anything.​​- Go to the settings tab and use the AUTO settings for FDE AI.​Install GMS Doze Magisk Module: https://github.com/gloeyisk/universal-gms-doze​
Screenshoots​
We have a telegram developer group for our Galaxy A71 device!! You can check what we are developing in real time or ask for help here.​
~ About this GSI ~​Maintainer Name : Nazim​Rom Support Group :Link​Device Support Group : Link​Rom Changelog : Link​Date Updated :17-04-2022​
CREDITS:​AncientOS developers - for ROM​@afaneh92 - for TWRP​Google - for AOSP​@bickbick - for testing the AOSP.​​
If you think i missed you DM me and i will credit you!​
reserved1
reserved2
Can this rom work on m51 ?
I think it should work. Its a GSI after all.. but make sure you have a backup just in case.
1. Does it require Android 12 firmware?
2. What is GSI?
Looks interesting......an AOSP ROM for A71!
Cheers
bickbick said:
1. Does it require Android 12 firmware?
2. What is GSI?
Looks interesting......an AOSP ROM for A71!
Cheers
Click to expand...
Click to collapse
Hello! 1. Android 11 should be ok.
2). Generic System Images​
A generic system image (GSI) is a system image with adjusted configurations for Android devices. It's considered a pure Android implementation with unmodified Android Open Source Project (AOSP) code that any Android device running Android 9 or higher can run successfully.
GSIs are used for running VTS and CTS-on-GSI tests. The system image of an Android device is replaced with a GSI then tested with the Vendor Test Suite (VTS) and the Compatibility Test Suite (CTS) to ensure that the device implements vendor interfaces correctly with the latest version of Android.)
Well guys you've done a brilliant job with this ROM.
It's fast, clean and not a Samsung app in sight!
Followed the 'How To' section and it was all installed, but didn't get Magisk...do I need to install the Magisk app?
With basic setup (I have not run the extra files in OP).
Observations:
1. It didn't like my 128GB SD card, not recognized after installing ROM (ok in TWRP). It suggests Formatting (I will back up and test).
2. Also SD card is not seen when connecting to a PC (driver needed?). I will test after formatting the SD card.
3. Does it need Magisk .APK? If so, will anyone do it? I did install the latest and it seemed ok until I updated Magisk ......it boot looped afterward and I had to start all over again!
4. Does it have Double Tap To Wake?
5. Also, in System it says an update is available, is it ok to update?
Otherwise a really good ROM. Highly recommended.
Bluetooth headset does not work, fix via magisk does not work on aosp
Still didn't recognize the 128GB SD card even after formatting it...
Tried 8GB, and that works fine.
bickbick said:
Well guys you've done a brilliant job with this ROM.
It's fast, clean and not a Samsung app in sight!
Followed the 'How To' section and it was all installed, but didn't get Magisk...do I need to install the Magisk app?
Click to expand...
Click to collapse
Thank You! Yes, after flashing Magisk in TWRP you need to install the same zip as an apk.
bickbick said:
With basic setup (I have not run the extra files in OP).
Observations:
1. It didn't like my 128GB SD card, not recognized after installing ROM (ok in TWRP). It suggests Formatting (I will back up and test).
2. Also SD card is not seen when connecting to a PC (driver needed?). I will test after formatting the SD card.
3. Does it need Magisk .APK? If so, will anyone do it? I did install the latest and it seemed ok until I updated Magisk ......it boot looped afterward and I had to start all over again!
4. Does it have Double Tap To Wake?
5. Also, in System it says an update is available, is it ok to update?
Otherwise a really good ROM. Highly recommended.
Click to expand...
Click to collapse
1.No drivers needed. Interesting tho'.. try formatting inside Android.
2.It's a kernel issue ,I cannot do anything.
3.Do not install another Magisk other than the one linked in the thread.
4.It should. I am not sure
5.I recommend you don't. You can try.
Thank you for your support!! I've listed you as a tester! Thank You @bickbick !!
Rawsion said:
Bluetooth headset does not work, fix via magisk does not work on aosp
Click to expand...
Click to collapse
try to disable a2dp offload in dev settings.. also you can try installing this apk .
No sound/mic in 2 sim card
AleksB.46 said:
try to disable a2dp offload in dev settings.. also you can try installing this apk .
Click to expand...
Click to collapse
Fix by the first point
Rawsion said:
No sound/mic in 2 sim card
Click to expand...
Click to collapse
this is common for AOSP.
Rawsion said:
Fix by the first point
Click to expand...
Click to collapse
what do you mean?
Couldn't get this ROM to see 128GB SD cards, so back to RayOS. Also Magisk was a bit iffy.
Maybe I'll take another look after some improvements. Really hoping this one is developed as AOSP on our A71 is very desirable.
Requests:
Fix SD card issues
DTtoWake gesture.
Volume Steps
Cheers.
bickbick said:
Couldn't get this ROM to see 128GB SD cards, so back to RayOS. Also Magisk was a bit iffy.
Maybe I'll take another look after some improvements. Really hoping this one is developed as AOSP on our A71 is very desirable.
Requests:
Fix SD card issues
DTtoWake gesture.
Volume Steps
Cheers.
Click to expand...
Click to collapse
I have noticed it will read an SD card if its formatted in NTFS

Categories

Resources