Related
The Superboot root method boot.img for 2.3.2 is now live thanks to Paul over at Android @ MoDaCo.
"Superboot is a boot.img that when flashed, will root your device the first time you boot (installing su and the superuser APK). No need to flash the system partition, no need to use ADB, no messing with the contents of your data partition, no overwriting the shipped ROM on your device, just flash the boot image using the instructions below and you're done!"
Using Superboot
- Download the zip file and extract
- Connect Nexus S via USB cable (with debugging enabled - Settings->Applications->Development->Check "USB Debuggging")
- Boot into bootloader mode - (Turn on while holding 'volume up')
- WINDOWS - double click 'install-superboot-windows.bat'
- MAC - Open a terminal window to the directory containing the files, and type 'chmod +x install-superboot-mac.sh' followed by './install-superboot-mac.sh'
- LINUX - Open a terminal window to the directory containing the files, and type 'chmod +x install-superboot-linux.sh' followed by './install-superboot-linux.sh'
*Again, All credit goes to Paul at Android @ MoDaCo*
Cool I'm rooted already but nice to see easier ways of doing it for the noobs. Appreciate the work.
Sent from my Nexus S using Tapatalk
Updated today to 2.3.2 and lost root. Used this and I'm back up and running ! Thank you!!!
Sent from my Nexus S using XDA App
2.3.2
can u do this being rooted or do you have to revert to stock
For some reason this didn't work for me. I tried it twice but each time the phone rebooted I still didn't have root. Do I have to unlock fastboot?
qreffie said:
For some reason this didn't work for me. I tried it twice but each time the phone rebooted I still didn't have root. Do I have to unlock fastboot?
Click to expand...
Click to collapse
i think you would
fastboot
fastboot satus failinvalid command
finally regain root, thank you!!!
qreffie said:
For some reason this didn't work for me. I tried it twice but each time the phone rebooted I still didn't have root. Do I have to unlock fastboot?
Click to expand...
Click to collapse
Yes. These instructions assume you have already unlocked your bootloader.
Sent from my Nexus S using Tapatalk
maybe a noob question: if I just root my Nexus S using this method (no custom rom installation), will I still be able to get OTA updates from google?
dakiz71 said:
maybe a noob question: if I just root my Nexus S using this method (no custom rom installation), will I still be able to get OTA updates from google?
Click to expand...
Click to collapse
Yes. You may have to re-root after updates but your phone will prompt you when OTA updates are available just like normal.
Sent from my Nexus S using Tapatalk
annndrewww said:
Yes. These instructions assume you have already unlocked your bootloader.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Figures. The answer was staring me in the face the whole time. I think I even remember unlocking it last time I rooted this way. I guess I should just leave it permanently unlocked then so it doesn't keep wiping every time I go to root after an update.
Hi,
I can't get it to work on my mac.
When I put the renamed as "superboot" folder on the desktop, I open the terminal and type in:
~/Desktop/superboot/chmod +x install-superboot-mac.sh./install-superboot-mac.sh
it doesn't find that path.
Could somebody help me as a noob?
Thank you!
Am I the only one that did not lose root after the latest 2.3.2 update?
DarkAgent said:
Am I the only one that did not lose root after the latest 2.3.2 update?
Click to expand...
Click to collapse
I used the superboot method for 2.3.1 and also did not lose root in with the 2.3.2 update.
Sent from my Nexus S using Tapatalk
You shouldn't.
P
Windows 7
For me install-superboot-windows is waiting for device long without success :\
No matter ... i had to force my pc recognize Nexus once more
Thank you. This seems simple. I'm stuck with my XP recognizing my Nexus S USB Driver after installing SDK and Google USB Driver even after trying to "update" driver under Device Manager and redirect the directory to Google USB Driver? I'm very confused.
philbs17 said:
Hi,
I can't get it to work on my mac.
When I put the renamed as "superboot" folder on the desktop, I open the terminal and type in:
~/Desktop/superboot/chmod +x install-superboot-mac.sh./install-superboot-mac.sh
it doesn't find that path.
Could somebody help me as a noob?
Thank you!
Click to expand...
Click to collapse
Ok buddy heres what you need to do, on the MAC, this is how i do it.:
DL the .zip in the OP.
Extract it on you're desktop
Rename the Extracted file to Nexus (thats what I name it)
youre device needs to have the bootlader Unlocked.
Open Terminal and type
cd desktop
cd nexus
chmod +x install-superboot-mac.sh (press enter)
./install-superboot-mac.sh (press enter)
then you're done. hope this helps.
Let me know.
Simply amazing! Thanks for the breakdown.
I recently soft bricked my phone due to freezing a /system/app in Titanium Backup that was needed by the system. Here is how I fixed it.
Run shell root from superoneclick in Early USB Enumeration
Once it says you have shell root, run the following commands:
adb shell
mount -o rw,remount /dev/block/mmcblk0p12 /system
cd /system/app
busybox chmod -R 755 *
Make sure you put the space then the star character (*) after 755, that tells the system to set the permissions of all the files/apps, in the /system/app directory.
Lastly, run the command:
adb reboot
Your phone should reboot and be back up and running.
what did you freeze so we don't make the same mistake?
Hey, amwbt, could I post a link to this thread in mine (the TiBU Freeze thread)?
I'm sure it would make things a lot easier for people if things go wrong when they're freezing stuff.
Oh, and I'd of course give you due credit.
xyrovice said:
Hey, amwbt, could I post a link to this thread in mine (the TiBU Freeze thread)?
I'm sure it would make things a lot easier for people if things go wrong when they're freezing stuff.
Oh, and I'd of course give you due credit.
Click to expand...
Click to collapse
Of course!
Sent from my MB860 using XDA App
franciscojavierleon said:
what did you freeze so we don't make the same mistake?
Click to expand...
Click to collapse
Unfortunately, I don't remember which ones they were. Once I got my phone back up I immediately unfroze everything that was not in the recommended apps to freeze list in the OP [HOW TO] Deal with Boat Safely & Properly {Freeze Method/ROOT} | BIGGER LIST(S)! 3/1
Sent from my MB860 using XDA App
Hello, thanks for posting this info! I asked a question in the atrix q&a area but perhaps it's best answered here.
My phone also got screwed up because of freezing something I shouldn't have.
How do I run super one click in early USB enumeration? I'm unfamiliar with super one click - on past phones I used other rooting methods, and I used aRoot and root v2 for the atrix.
My phone crashes during bootup when the moto logo begins the red dot animation - I don't know how to get super one click to recognize it at all, presumably because it's frozen.
Please note that this will NOT work on 1.57.
***Root method for .621 update***
THIS IS FOR USERS WITH THE .621 UPDATE ONLY. IF YOU HAVE NOT UPDATED DO NOT USE THIS METHOD.
*****DO NOT USE WINDOWS*****DO NOT USE RSDLITE*****
Instructs are made by Skelente
1.) Download the latest Ubuntu iso for your system. Most processors these days are 64 bit, but if you're running on an older computer or do not know if you have a 32 or 64 bit processor I'd recommend doing 32 bit just to be safe (64 bit processors can run both 32 and 64 bit distributions, but 32 bit systems cannot run 64 bit distributions.) Side note: you can download other distributions, but if you do you will not be able to create the persistent drive using the USB method. It should also be noted that some older systems cannot boot from USB, most newer systems (post 2000/2001 IIRC) can boot from USB, however you should consult Google to verify for your system.
2.) Burn the iso:
2.a If you have a cd burner and blank disc, this is the easiest method but, again, you will not have a persistent drive you will just have a Live CD. Use an iso burner to burn to cd, then skip to step 3a.
2.b If you do not have a burner, a blank disc (or don't feel like wasting a DVD disc) but have a free USB drive (with at least 2 GB of memory, bit overkill but it has to be big enough to hold the iso + changes + the persistent "drive") then I recommend downloading either unetbootin or universal USB installer. Go to either web site and follow their instructions. If you use Ubuntu, you'll have the option of creating a persistent drive, which is basically a fake-partition that allows you to save files to when you reboot Linux after running this Live USB. I would recommend using a persistent size of at least 200 mb so we can save the SBF file and sbf_flash. If you created a persistent drive go to step 4. If you opted out of this, skip to step 4.
3.a So you have a Live CD now. If you have a spare flash drive, load up the 604 SBF and sbf_flash. Either way, you'll need to proceed to booting into linux, go to step 4.
3.b Once the respective application has finished, copy the SBF and sbf_flash file to the persistent drive listed in windows.
4. Now we need to boot from your Live image. Restart your computer. When your computer is booting up it should give you two options, "Enter BIOS" and "Select Boot Order" or similar. For my Lenovo Laptop, I can hit F12 to change the boot order, and from there I can select my USB port and it'll boot from there. If you do not see a boot order option, you will need to go into your bios and change the boot order manually. Again, you will need consult Google for this as the menu selections vary by system. It really isn't that hard to figure out if you go through the menus, but I strongly, strongly, strongly recommend and encourage you to google your motherboard's manual to verify what you need to change if you don't know what you are doing. You are responsible for any changes you make on your system. Your BIOS is crucial for your system to function properly. Once you have found where to change your boot order, select the respective drive (USB, or your CD/DVD drive). These will be listed by the manufacture name (so SamsungXXXX for a Samsung drive or PNYXXXX if you're using a PNY usb stick.)
5. When Ubuntu boots up, it'll give you an option to run "Live" from the CD/USB. Select this option. Installing to your hard drive could mess up your current OS install, and I'm not going to get into partitioning here. Once you've gotten into Ubuntu, select "Dash Home" in the upper left hand corner, and then type terminal in the search box. Click terminal, then open it up.
6. Now you'll need to get to where ever you have the SBF and sbf_flash stored through the terminal. If you chose to use the boot cd, and did not have an available flash drive, you will need to download the SBF from here, as well as sbf_flash and then extract them to the same folder. The default is "Downloads" and I recommend just extracting them to that directory for simplicity.
6.a If you had to download the SBF/sbf_flash, getting there through terminal is rather easy. All you'll need to do is type these commands into the terminal:
cd Downloads
chmod +x sbf_flash
./sbf_flash mb809-2.3.5.sbf
And then let the program do it's work. When it's done, go to step 7.
6.b If you already copied the required files to a USB drive, we need to get there through terminal. Type these commands:
cd /
cd /media/
ls (This command will list all the drives connected to your system, cdrom, usb, etc. If you used the Universal USB installer it will list the USB drive as "PENDRIVE", I'm not sure what the default is for Unetbootin but you should be able to figure it out and if you just used a spare device it could be completely random.)
cd drivename (obvioiusly this will vary based on the USB method, for me its "cd PENDRIVE"
If your files were just on the main drive, you don't need to do anything else but the following commands. If you put them in another folder, you will need to do "cd foldername" without the quotes obviously. When you're in the directory with both the SBF and sbf_flash you will need to do these commands (again, ignoring the '-'):
chmod +x sbf_flash
./sbf_flash mb809-2.3.5.sbf
And then let the program do it's work. When it's done, go to step 7.
7.) After sbf_flash is done, you'll need to restart your computer. Its recommended you remove your boot media (cd or usb drive) so that Windows can boot normally. If you changed the boot order in bios you will need to change it back to what it was before, otherwise whenever you have a CD/USB stick plugged in your computer will automatically try to boot from it, and get pissy if it can't boot from the media.
8.) Once you're back in windows you'll need to run the zergrushv4 root method. From there you can do whatever you want. You still cannot SBF to previous versions (602 or 605) and you cannot run Froyo roms.
Downloads:
sbf_flash
SBF File & root tools
*HELP*
If you flashed with RSD Lite and have no data here is your options...
Flash stock .621 sbf and...
Switch devices on your account to reactivate the data
or
Call verizon to have them reporvision your data...
Once you are on the milestone system you can flash a custom rom.
You must SBF in Linux using sbf_flash, otherwise .604's radio will flash over .621's and your phone will no longer be able to take or place phone calls.
Edit: It may just be data, instead of phone capabilities. But still, flashing in Linux is much easier than having to spend time with Verizon's incompetent phone operators.
Sent from my Transformer TF101 using Tapatalk
If you SBF'd using RSD Lite, you flashed the 605 baseband over the 621. I didn't think this would mess up texts/phone calls but just your data connection, but correct me if I'm wrong I'm just going from memory (I had a dx2, just been watching the threads.) This was a big problem for the people over at rootz and they had a few different tactics on how to solve it. Some were able to call VZW and ask the tech support to "re-provision their data" although that was with mixed results (it depended who ya got on the phone, some people had no luck and other people had their data start back up no problems.) You would need to sbf back to 621 and call from a separate phone, however. Another user (skreelink) theorized that it was merely the AUTH code that was being messed up, and suggested that (for those with a secondary smart phone) you just go onto VZW.com, switch out phones for your number, wait 15 minutes, then go back to the website and switch back to your DX. I'm not sure if anyone has had any success with the latter but I know the former worked for a handful of people (with others getting tech support who had no idea what they were talking about.) If you call and don't get someone knowledgeable, I'd just cross your fingers and call back another time and hope you get someone different.
link not working
anyone have updated link that works to download this?
yea i learned about the radio the hard way, but i found a quick fix... maybe...
If you flashed with windows and now cant get data if you have a old smartphone that is compatible with you plan just go online and switch devices and then switch them back. Saves from having to call verizon But some people may not have a extra
I am probably one of those people who will also need to use this alternative root method but I have a question -
I have been recently acquainted to this dilemma on my "new" Droid X. I mistakenly started downloading the .621 update on my Droid X . I quickly realized what was happening and pulled the battery before the download was complete. (data disabled on phone) . I turned off my router. I reinstalled the battery and turned off all of the data on the phone. I tried clearing the cache but get a message the triangle that it will try to download it again. I pulled the battery and do not plan on powering up the phone with any data connection until I can get some clarification on what to do . The phone has little value to me if it can't be rooted . Is there anyway to stop the train at this point and go back to .605 ( i believe that was the previous one) . - Thanks
bamx2 said:
I am probably one of those people who will also need to use this alternative root method but I have question -
I have been recently acquainted to this dilemma on my "new" Droid X. I mistakenly started the downloading the .621 update on my Droid X . I quickly realized what was happening and pulled the battery before the download was complete. (data disabled on phone) . I turned of my router. I reinstalled the battery and turned off all of the data on the phone. I tried clearing the cache but get a message the triangle that it will try to download it again. I pulled the battery and do not plan on powering up the phone with any data connection until I can get some clarification on what to do . The phone has little value to me if it can't be rooted . Is there anyway to stop the train at this point and go back to .605 ( i believe that was the previous one) . - Thanks
Click to expand...
Click to collapse
If you disabled the download you are still on .605.
Turn your phone on, quickly root it with Pete's Motorola Root Tools, install Titanium Backup and freeze the "2.3.3 Updater" application.
Afterwards, reboot your phone and you should be golden.
Sent from my DROIDX using Tapatalk
nfazzdar - Thanks for the reply . I did a factory reset and that got rid of the yellow triangle. I then rooted as you suggested and installed TiBu . I really is too bad that M and V are pullin this cr#p .
I am going to update the post and host the files. There is also some extra stuff i will put up for download.
For people who don't want to pay for Titanium Backup to have the freeze feature, use a free app called gemini app manager.
Good to know. I think that I will also install OTA Rootkeeper as well.
deboyz1014 said:
For people who don't want to pay for Titanium Backup to have the freeze feature, use a free app called gemini app manager.
Click to expand...
Click to collapse
using linux mint and have a ?
I've followed everything, I believe, but when I run the commands in linux everything runs then it says "reboot into bootloader" and just sits there. I've tried doing it in bootloader and get a message 'waiting on phone:failed Are you root? Can someone steer me in the right direction I gotta get this phone on another ROM. Thanks in advance.
BRANDENDEUCE said:
I've followed everything, I believe, but when I run the commands in linux everything runs then it says "reboot into bootloader" and just sits there. I've tried doing it in bootloader and get a message 'waiting on phone:failed Are you root? Can someone steer me in the right direction I gotta get this phone on another ROM. Thanks in advance.
Click to expand...
Click to collapse
Exactly the same problem here too.
Sent from my HTC Flyer P510e using XDA
landonotis said:
Exactly the same problem here too.
Sent from my HTC Flyer P510e using XDA
Click to expand...
Click to collapse
You need to either:
Code:
sudo su
./sbf_flash
or
Code:
sudo ./sbf_flash
Note: if using
Code:
sudo su
be sure that the terminal shows a "#" instead of a "$" after you input the command. This shows that you are root.
Sent from my DROIDX using Tapatalk
infazzdar said:
You need to either:
Code:
sudo su
./sbf_flash
or
Code:
sudo ./sbf_flash
Note: if using
Code:
sudo su
be sure that the terminal shows a "#" instead of a "$" after you input the command. This shows that you are root.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
When exactly do we need to input the code? I am assuming this is in terminal on linux?
BRANDENDEUCE said:
When exactly do we need to input the code? I am assuming this is in terminal on linux?
Click to expand...
Click to collapse
Sorry for not specifying, but you assume correctly.
Sent from my Transformer TF101 using Tapatalk
What roms can we use now?
Now that we have root and su on the droid x/milestone what roms are we able to flash? I know they can't be froyo based but do they now have to be related to the milestone roms, droid x, or both? I've tried a few and it's always an abort so I'm just needing some direction here...
BRANDENDEUCE said:
Now that we have root and su on the droid x/milestone what roms are we able to flash? I know they can't be froyo based but do they now have to be related to the milestone roms, droid x, or both? I've tried a few and it's always an abort so I'm just needing some direction here...
Click to expand...
Click to collapse
I believe this thread will be of help to you. =D
http://rootzwiki.com/index.php?/topic/21337-[ROMS]-Multi-ROM-Thread---Blur-Based-ROMs-for-those-on-.621/.604!
Sent from my DROIDX using Tapatalk 2 Beta-5
This worked great.
Any cwm kernels are we able to use?
Just wondering if we can flash custom kernels since we can do roms? If so any help would be appreciated.
Hey everyone,
first off, I have my Kindle for a few weeks now and it's my first Androit device. I started reading into rooting and adb commands only a few days ago, so please excuse me if I'm not writing accurately with some terms. Additionally, I could not find a similar problem via searching.
Here's my problem (I'll try to be as detailed as possible):
I rooted my KFSOWI running 11.3.1.0 yesterday using Moronigs rooting method. It went well and I had full root access (typing su in an adb shell resulted in an # and all that).
Today I wanted to edit the framework-res.apk to exchange some images. Stupid as I tend to be I wanted to rename the original file and then paste my modified one. The device started giving out various crashes, telling me that lots of apps stopped working. Only then I realised that the file is needed to run the system. Unfortunately the Kindle had shut down at some point and when I boot it now it only gives me a black screen (although the backlight is still on).
Here's what I tried so far:
1. I wanted to adb push the modified file to the system/framework folder, but it tells me that the folder is read-only.
2. So I wanted to change permissions but it seems I don't have root access anymore (I don't even get the # output in the adb-shell after typing su).
3. I tried installing the package via adb but it says "Error: COuld not access package manager. Is the system running?"
I guess it doesn't boot up the package manager and root access. You guys have any idea what I can do right now? Seems like a lost cause to me. And if so, can I try sending it back via warranty?
Any help is very much appreciated. And thanks for all the great work on these forums.
Does nobody have an idea? Would be very sad if I couldn't use it anymore. Although I'm the only one to blame. Does someone have experience on sending it back to amazon for warranty? As far as I know rooted devices lose their warranty.. :-/
Karelian_ said:
Hey everyone,
first off, I have my Kindle for a few weeks now and it's my first Androit device. I started reading into rooting and adb commands only a few days ago, so please excuse me if I'm not writing accurately with some terms. Additionally, I could not find a similar problem via searching.
Here's my problem (I'll try to be as detailed as possible):
I rooted my KFSOWI running 11.3.1.0 yesterday using Moronigs rooting method. It went well and I had full root access (typing su in an adb shell resulted in an # and all that).
Today I wanted to edit the framework-res.apk to exchange some images. Stupid as I tend to be I wanted to rename the original file and then paste my modified one. The device started giving out various crashes, telling me that lots of apps stopped working. Only then I realised that the file is needed to run the system. Unfortunately the Kindle had shut down at some point and when I boot it now it only gives me a black screen (although the backlight is still on).
Here's what I tried so far:
1. I wanted to adb push the modified file to the system/framework folder, but it tells me that the folder is read-only.
2. So I wanted to change permissions but it seems I don't have root access anymore (I don't even get the # output in the adb-shell after typing su).
3. I tried installing the package via adb but it says "Error: COuld not access package manager. Is the system running?"
I guess it doesn't boot up the package manager and root access. You guys have any idea what I can do right now? Seems like a lost cause to me. And if so, can I try sending it back via warranty?
Any help is very much appreciated. And thanks for all the great work on these forums.
Click to expand...
Click to collapse
At this point, I would send it back to Amazon. all they will check for is physical damage and send it back to China. I hear some people bricking their tablet several times and getting a replacement. Thing is that Amazon's warranty questions are only water damage and did you drop it questions. So you don't even have to BS them to get a replacement.
If you have a fast boot cable you might restore it. Now it's not the cable that came with Kindle, it's a special programming cable that will put it into fast boot mode.
Sent from my Amazon Kindle Fire2 using xda app-developers app
braider said:
If you have a fast boot cable you might restore it. Now it's not the cable that came with Kindle, it's a special programming cable that will put it into fast boot mode.
Sent from my Amazon Kindle Fire2 using xda app-developers app
Click to expand...
Click to collapse
There are no exploits for this boot loader yet. Don't think a fastboot cord will do much at the time.
Sent from Nexus 7 flo running SinLess ROM 4.2.2 using xda app-developers app
Did noone come up with a solution, because i did the same thing, with the framework-res.apk
i can make a fastboot cable if itll do any good without an unlocked bootloader. could i possibly push the most recent update.bin from amazon and restore the device to stock???
---------- Post added at 04:06 AM ---------- Previous post was at 03:10 AM ----------
i wouldnt take bricked for an answer and i found a fix
what i did was make sure the kindle was connected to adb and typed the following
adb reboot
adb wait-for-device shell su
the shell managed to snag the SU file and displayed # before the device looped thru all of the boot apps over and over, but then CMD froze.
so i tried this
adb reboot
adb wait-for-device shell su mount -o remount,rw -t ext4 /dev/block/platform/omap/omap.hsmmc.1/by-name/system /system
and in one line got root access and remounted the system as RW
my problem was that framework-res APK was replaced with ZIP so all i had to do was rename it
# cp /system/framework/framework-res.zip /system/framework/framework-res.apk
and success!!
# exit
$ exit
adb reboot
and she booted right up!!!!
First response so please be kind. My KFSOWI is stuck in the bootloop too. I have a factory cable and can get into fastboot but don't have any factory images to restore. Anyone have any ideas?
Do you get any adb access? I don't think casebook will be any help until someone unlocks the bootloader
Sent from my KFSOWI using XDA Premium 4 mobile app
I believe I habe the kfsowi model. it is 11.3.1.0 it is rooted and I am wanting to factory reset it but I dont have a factory cable. just a normal usb cable that I've been using adb to transfer and even instlal some files because through tweaking it, it lead to a missing status bar in which i change the qmenu = to 0 and 1 or whatever in build.prop but no matter what it doesnt keep the status bar active at all times like it should be. it is non existent until i click on an app in apex, adw or any launcher ive tried then it flashes and disappears. during this flash it is not usable no matter how fast i click it.
also a small issue it has is ever reboot, it says kindle is upgrading but it is not upgrading at all because i have tried to click check now in settings to check for updates but every time it says update failed. next after that message it says starting applications for about 20 seconds. long bootup. i have probably messed with tweak i shouldnt have with pimp my rom and also android tweaker 2 and pro before it became 2. so the status bar is non existent. sucks cause cant even get facebook notifications lol.
i did factory reset it by the menu and also by using andromizer app to click recovery mode and do it that way.
(without status bar i been using all in one gestures but now recently i switched to using LMT.
this kindle has a few issues since i made it kinda as minimal as i could and probably uninstalled a couple things i shouldnt of lol like it only installs apps with adb install and adb install -r sometimes as well as through 1mobile market which is awesome. it will not sideload anything now because through uninstalling an extra deal or two i should of, it wont allow me to enable unknown sources installation through menus. if anyone knows a way to do this through terminal of linux that would be great
thanks to any help
or would there be any way to use the water beta without the cable and only using adb or any other steps. which to my understanding is the only rom so far. thanks
If you are rooted You should I think be able to run these commands from a terminal in Linux, if you meant a terminal on your kindle then take off the and shell in the commands I list to run.
Code:
adb shell
su
reboot bootloader
I think if you are rooted it will kick it into fastboot and you can restore without a cable.
Sent from my LG-P769 using Tapatalk
thanks for the quick reply. yeah i am speaking of terminal from debian/ubuntu. I enter those commands you give me and it is recognizing the device. With adb I can even push files to install since it is screwed up and I can't access the menu part for installing from unknown sources. that is the worst part of the few issues I have with it.
after I enter those commands it only reboots normally. it doesn't go into the bootloader. I can get it to go into recovery mode where I am able to just do a normal wipe of the device but that is about it.
just to make sure I understand this. with a fastboot cable and all it is a different method from just a normal "wipe and reset" isn't it? it is using an untouched .img or something to put back to actual FACTORY as if bought from store? cause the normal wipe and factory reset doesn't put back the items I uninstalled of course from system and what not.
also is this safe to do without a factory cable. I just haven't ever needed one before and even if there is an extra step or two I don't mind instead of waiting a week for a cable.
Actually you might not even need the fastboot cable, if I remember correctly the restore method for that device would normally flash a system image that is smaller and incomplete because the system IMG is to big for fastboots 's buffer, then when it was just bootable enough to have adb push a file, it would push a amazon update file and run a command that forces the system partition to update back to stock from the update zip. So you should be able to simply push the update file for your amazon os version or older/newer and force update it. I don't have instructions handy right now for doing this and its late so maybe I post them tomorrow.
Sent from my Amazon Tate using Tapatalk
stunts513 said:
Actually you might not even need the fastboot cable, if I remember correctly the restore method for that device would normally flash a system image that is smaller and incomplete because the system IMG is to big for fastboots 's buffer, then when it was just bootable enough to have adb push a file, it would push a amazon update file and run a command that forces the system partition to update back to stock from the update zip. So you should be able to simply push the update file for your amazon os version or older/newer and force update it. I don't have instructions handy right now for doing this and its late so maybe I post them tomorrow.
Sent from my Amazon Tate using Tapatalk
Click to expand...
Click to collapse
if you could do that that'd be awesome. thanks. I just read up about a locked bootloader but I've seen it's made some progress. I just need to be sure to not turn it into a drink coaster lol.
I finally found a way to do factory reset thanks to gran pc
How to reinstall FireOS
Botched your /system partition beyond recognition? Everything is broken? Dropped your #Kindle in a sea of piss and need to RMA it? Fear not! You can just reinstall FireOS and get it looking just as if we had never touched it!
First of all, you'll have to root your tablet. I'm assuming you know how to do this!
Once that's done, put this file -- https://s3.amazonaws.com/kindle-fire-updates/update-kindle-11.3.1.0_user_310084920.bin -- in /sdcard/ (you can use adb push).
Then run these commands:
jesunoiMac:multidownload granpc$ adb shell
[email protected]:/$ su -
[email protected]:/# cp /sdcard/update-kindle-11.3.1.0_user_310084920.bin /cache/update.zip
[email protected]:/# echo --update_package=/cache/update.zip > /cache/recovery/command
[email protected]:/# exit
[email protected]:/$ exit
jesunoiMac:multidownload granpc$ adb reboot recovery
If everything went well, you should see the 'installing update' screen -- and once you're booted, we're back to stock! We did it!!!!!!
s3.amazonaws.com/kindle-fire-updates/update-kindle-11.3.1.0_user_310084920.bin
funny thing is I rerooted after the clean update and forgot all about OTA's being automatic of course. The damn thing upgraded to 11.3.2.2 which I searched has NO root exploit right now. I am wondering if I can do the same above steps to go back to 11.3.1 but that is a downgrade and I am worried about a brick although amazon new update is like an iphone you can't tell any difference haha
also is the above way how you install ICE or hellfire?
slixz85 said:
I finally found a way to do factory reset thanks to gran pc
How to reinstall FireOS
Botched your /system partition beyond recognition? Everything is broken? Dropped your #Kindle in a sea of piss and need to RMA it? Fear not! You can just reinstall FireOS and get it looking just as if we had never touched it!
First of all, you'll have to root your tablet. I'm assuming you know how to do this!
Once that's done, put this file -- https://s3.amazonaws.com/kindle-fire-updates/update-kindle-11.3.1.0_user_310084920.bin -- in /sdcard/ (you can use adb push).
Then run these commands:
jesunoiMac:multidownload granpc$ adb shell
[email protected]:/$ su -
[email protected]:/# cp /sdcard/update-kindle-11.3.1.0_user_310084920.bin /cache/update.zip
[email protected]:/# echo --update_package=/cache/update.zip > /cache/recovery/command
[email protected]:/# exit
[email protected]:/$ exit
jesunoiMac:multidownload granpc$ adb reboot recovery
If everything went well, you should see the 'installing update' screen -- and once you're booted, we're back to stock! We did it!!!!!!
s3.amazonaws.com/kindle-fire-updates/update-kindle-11.3.1.0_user_310084920.bin
funny thing is I rerooted after the clean update and forgot all about OTA's being automatic of course. The damn thing upgraded to 11.3.2.2 which I searched has NO root exploit right now. I am wondering if I can do the same above steps to go back to 11.3.1 but that is a downgrade and I am worried about a brick although amazon new update is like an iphone you can't tell any difference haha
also is the above way how you install ICE or hellfire?
Click to expand...
Click to collapse
ah good you found it before i could look it up. It will downgrade just fine, but you will probably need a fastboot cable to do it. If ICE or hellfire are roms then no, the 2013 isn't flashable with the exception of kindlewater. Since the bootloader is locked we are limited to using amazon's bootimg(kernel+intram fs).
stunts513 said:
ah good you found it before i could look it up. It will downgrade just fine, but you will probably need a fastboot cable to do it. If ICE or hellfire are roms then no, the 2013 isn't flashable with the exception of kindlewater. Since the bootloader is locked we are limited to using amazon's bootimg(kernel+intram fs).
Click to expand...
Click to collapse
ok sounds like I need to find out if putting water on this without a fastboot cable is possible then