Need to check DRK first . S6 Active - Galaxy S6 Active

updated to MM via odin , odin passed after that getting Need to check DRK first please help

Sami749 said:
updated to MM via odin , odin passed after that getting Need to check DRK first please help
Click to expand...
Click to collapse
Well you most likely used Odin to flash a non SM-G890 file.
I take it your phone won't load now?
Unfortunately this is perhaps the only modern Samsung phone which does not have DRK solution.

Nope i flashed MM firmware given here in an other thread.. well what ever a phone is in the box unless get some solution

Solved

How did you solve it please?

tenfiftysix said:
How did you solve it please?
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...0a-marshmallow-6-0-1-drk-fixed-t3469257/page1
It seems that OP is offering the file via Skype.

FevenKitsune said:
http://forum.xda-developers.com/gal...0a-marshmallow-6-0-1-drk-fixed-t3469257/page1
It seems that OP is offering the file via Skype.
Click to expand...
Click to collapse
I'll flash it remotely

here is image that show it wad rooted 6.0.1 i test in unlock network and repair imei..!
http://cloud.tapatalk.com/s/58b8b24c3c2a7/FB_IMG_1488497560081.jpg?
Sent from my SM-G935T using Tapatalk

Related

[Q] My galaxy S4 active sgh-i537 is soft bricked, need help

My phone was rooted then it updated to the 4.3 and when i reset it because the galaxy play store was not working i tried to re root it and it got stuck on a screen upon boot that says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. But when i go into Kies it just tries to connect and does't not recognize my phone. I need help on what to do please, I have tried everything.
lavorno said:
My phone was rooted then it updated to the 4.3 and when i reset it because the galaxy play store was not working i tried to re root it and it got stuck on a screen upon boot that says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. But when i go into Kies it just tries to connect and does't not recognize my phone. I need help on what to do please, I have tried everything.
Click to expand...
Click to collapse
Do you have CWM installed?
tiskael said:
Do you have CWM installed?
Click to expand...
Click to collapse
no
lavorno said:
no
Click to expand...
Click to collapse
Sorry, should have read a bit closer. I was going to recommend that you use CWM to flash ROMs back but you don't have the i9295. Where did you purchase it from? I'm from Australia, so I'm not sure about the US, but I think I've read in other threads that some Best Buys(?) have Samsung stores in them that have reflashed the stock firmware free of charge without actually checking your warranty. Maybe you want to look into this?
tiskael said:
Sorry, should have read a bit closer. I was going to recommend that you use CWM to flash ROMs back but you don't have the i9295. Where did you purchase it from? I'm from Australia, so I'm not sure about the US, but I think I've read in other threads that some Best Buys(?) have Samsung stores in them that have reflashed the stock firmware free of charge without actually checking your warranty. Maybe you want to look into this?
The problem with your S4A is that it has a locked bootloader, so you can't flash firmware yourself, sorry!
Click to expand...
Click to collapse
I bought it in the US at a best buy so i will take it there and see what they can do, thanks for the help.
lavorno said:
I bought it in the US at a best buy so i will take it there and see what they can do, thanks for the help.
Click to expand...
Click to collapse
If you don't want to go to Best Buy right away you can try flashing the firmware yourself.
http://forum.xda-developers.com/showthread.php?t=2629093
If you took the official OTA for 4.3, ML2, there is no known root exploit available. Odin is easy to flash with - there are 1 clicks that do all the hard work for you, all you have to do is put your phone into download mode and the app does the rest on your PC. Make sure you have the proper drivers installed. Best way I found was to download the software suite from Samsung for the phone. Without the proper drivers Odin won't see the phone (I found this out the hard way.)
lavorno said:
I bought it in the US at a best buy so i will take it there and see what they can do, thanks for the help.
Click to expand...
Click to collapse
I just took it to best buy and they restored it and now it is as good as new, thanks for the advice.
lavorno said:
I just took it to best buy and they restored it and now it is as good as new, thanks for the advice.
Click to expand...
Click to collapse
No worries, I heard they were pretty good in the US. Remember though, you can't root it on 4.3 (yet). If they've set it back to 4.2.2 then you can root again and not update to 4.3. If they've set it to 4.3 then either you will have to follow @Devo7v's instruction to flash back or wait it out as a root method is currently being worked on.
Bricked SGH i537
my sghi537 has bricked. i can only enter into download mode..
As i downloaded stock firmware of 4.3 ML2 and i tried to flash it by Odin...
Unfortunately at first odin said that i have no pit partition...
then i downloaded Pit and tried to flash but ^^^ write failed ^^^ was the thing i saw every time...
I looked up my phn download mode screen and i found that ^^^ Write protection Enable ^^^
So i couldnt flash stock ML2 firmware and my phn is bricked ....
Someone pls help me...........
Shabnur said:
my sghi537 has bricked. i can only enter into download mode..
As i downloaded stock firmware of 4.3 ML2 and i tried to flash it by Odin...
Unfortunately at first odin said that i have no pit partition...
then i downloaded Pit and tried to flash but ^^^ write failed ^^^ was the thing i saw every time...
I looked up my phn download mode screen and i found that ^^^ Write protection Enable ^^^
So i couldnt flash stock ML2 firmware and my phn is bricked ....
Someone pls help me...........
Click to expand...
Click to collapse
What firmware were you originally on.
Devo7v said:
What firmware were you originally on.
Click to expand...
Click to collapse
I was in 4.3 Ml2
it will b a lot if u help me......
my phn is dead now..
Its saying try kies to recover firmware......
Shabnur said:
I was in 4.3 Ml2
it will b a lot if u help me......
my phn is dead now..
Its saying try kies to recover firmware......
Click to expand...
Click to collapse
Download the full ML2 Odin, check the MD5 to make sure you didn't get a corrupted download. MAKE SURE all the files are in the right place in Odin and flash away. It should put the stock firmware back on the phone. Then you can proceed from there.
Devo7v said:
Download the full ML2 Odin, check the MD5 to make sure you didn't get a corrupted download. MAKE SURE all the files are in the right place in Odin and flash away. It should put the stock firmware back on the phone. Then you can proceed from there.
Click to expand...
Click to collapse
Sorry to disturb u again..
i m new in advance user mode..
will u tell me how i can compare the md5 num..
i dont even no where it is..
pls help me a little bit more....
Shabnur said:
Sorry to disturb u again..
i m new in advance user mode..
will u tell me how i can compare the md5 num..
i dont even no where it is..
pls help me a little bit more....
Click to expand...
Click to collapse
The MD5 is sort of like the fingerprint for the file, so you need the MD5 of the file you downloaded to match the MD5 that was posted in the thread. Download WinMD5Sum from the website here. Under File Name load the ML2 Odin zip package that you downloaded. WinMD5Sum will generate the MD5 of the file you downloaded and you can compare that to the MD5 the uploader posted in the thread. If the MD5's match then that means you downloaded exactly what was posted. If the MD5's don't match exactly, then you have a corrupted download and need to download it again.

Please HELP, Urgent Help Needed. Apps Crashing & DM-VERITY Verification Failed

Hi, I have a stock note5 SM-N920C DUOS from XSG region. Suddenly all apps started crashing and when I tried to factory reset it went to recovery & said "DM-Verity Verification failed". I did a factory reset in recovery but that did not fix the app crashing problem. This phone was stock, absolutely no changes & I was the first buyer who took it out of a factory sealed box.
I then tinkered with different things and thought if I loaded a custom ROM maybe the app crashing issue will be fixed and downloaded IOLO 4 with arter kernel. After loading the recovery and flashing the rom through philz recovery my phone would not boot. so I downloaded the stock rom from samfirmware and loaded it through odin and my phone is back to the original problem where apps are crashing again and stock recovery says "DM-Verity verification failed". Please advise what to do as I am really worried as my phone is out of warranty now & I don't have the money to buy another phone.
PLEASE HELP !!
Please help!
I would just like to add that if I restart the phone the boot up samsung music gets interrupted and the phone stays in the boot loop for about two tries and is finally able to boot up in the try when the boot music plays all the way to the end.
Sent from my XT1254 using Tapatalk
di u try to flash stock kernel??
mtrujillog1 said:
di u try to flash stock kernel??
Click to expand...
Click to collapse
Thanks a lot for your reply. If I flash the stock rom does it not include the kernel too?
If not can you please advise where I would download the stock kernel for my phone.
Sent from my XT1254 using Tapatalk
faisalsiddiqui said:
Thanks a lot for your reply. If I flash the stock rom does it not include the kernel too?
If not can you please advise where I would download the stock kernel for my phone.
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
Yes the stock kernel should be included in the stock firmware you downloaded from Sammobile. To make sure that your phone is flashed with the correct firmware, use SmartSwitch. You just have to give it your model number and IMEI number and it will make sure you've got the right version for your phone.
If that doesn't work , try calling Samsung and having them guide you through the process. Don't tell them you're rooted or they likely wont help you.
Akw6190 said:
Yes the stock kernel should be included in the stock firmware you downloaded from Sammobile. To make sure that your phone is flashed with the correct firmware, use SmartSwitch. You just have to give it your model number and IMEI number and it will make sure you've got the right version for your phone.
If that doesn't work , try calling Samsung and having them guide you through the process. Don't tell them you're rooted or they likely wont help you.
Click to expand...
Click to collapse
Thanks I appreciate your help. When I try to use smart switch it does not accept my serial no and says that either the model no or the serial no is incorrect and I am adding this info correctly right from the box.
Sent from my XT1254 using Tapatalk
faisalsiddiqui said:
Thanks I appreciate your help. When I try to use smart switch it does not accept my serial no and says that either the model no or the serial no is incorrect and I am adding this info correctly right from the box.
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
hi ,
Firstly,i posted this info in another thread also .Also i might be wrong
Apparently Smart Switch will not work if your device was modified or rooted ..?
Plse check claim if this is correct ..!
Otherwise, you wasting your time with Smart Switch .
Just for record i have N920C , not rooted and Smart switch works fine .
good luck .
willcor said:
hi ,
Firstly,i posted this info in another thread also .Also i might be wrong
Apparently Smart Switch will not work if your device was modified or rooted ..?
Plse check claim if this is correct ..!
Otherwise, you wasting your time with Smart Switch .
Just for record i have N920C , not rooted and Smart switch works fine .
good luck .
Click to expand...
Click to collapse
Thanks I'll check and update the thread for benefit of others facing similar problem.
Sent from my XT1254 using Tapatalk
faisalsiddiqui said:
Thanks I'll check and update the thread for benefit of others facing similar problem.
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
hi,
if you still struggling with your device.? As above poster said, download your latest correct stock Rom for your device (not just any old Rom ) try flashing with Odin v3. 10.7
Good luck

need firmware for SM-T817A

please can anyone help?
I cant find this anywhere.
I did the 5.1.1 update so not sure if I need the original or the updated one?
I think this is the one I had T817AUCU1AOH2
thank you
so with 44 views and no answers , I'm assuming there's no firmware for at&t?
those bastards!
so can't prove I bought it to send it in for warranty repair......
now willing to try anything! any devs have a new hack they need tested?
rredlin said:
so can't prove I bought it to send it in for warranty repair......
now willing to try anything! any devs have a new hack they need tested?
Click to expand...
Click to collapse
Thank @envirocy for this. SM-T817OH1 firmware.
https://drive.google.com/file/d/0B1DaPxlq4YoQUXQ0NG5xVUpKUm8/view?usp=sharing
ashyx said:
Thank @envirocy for this. SM-T817OH1 firmware.
https://drive.google.com/file/d/0B1DaPxlq4YoQUXQ0NG5xVUpKUm8/view?usp=sharing
Click to expand...
Click to collapse
so extracted the zip and put ap in Odin and it worked. but I have no cell signal no lte or anything. it shows att but nadda. did I do some wrong? should I have put all 4 files in the spots in odin?
also I found there is now an oem unlock. does that mean I can unlock this bootloader or get perm root? or twrp?
thanks
You need to flash all of them in the appropriate slots, but you probably can get away with just the modem. That should get your signal back.
Enable OEM unlock before rooting with Kingroot again.
You can't install twrp or supersu as you still have a locked bootloader.
ashyx said:
You need to flash all of them in the appropriate slots, but you probably can get away with just the modem. That should get your signal back.
Enable OEM unlock before rooting with Kingroot again.
You can't install twrp or supersu as you still have a locked bootloader.
Click to expand...
Click to collapse
Thanks my friend, you really do help, not only me but a lot of ppl!
I just did all 4 anyways....
Tried king root 4.8.0 and it put a different kind of warring on screen (blue screen over entire tab that read unauthorized software install, go to an at&t store now, or something) that also tripped Knox to = 1 (yes I had oem unlocked).
So at this point I will try anything.......Goin to try king root 4.8.2!
Thanks
rredlin said:
Thanks my friend, you really do help, not only me but a lot of ppl!
I just did all 4 anyways....
Tried king root 4.8.0 and it put a different kind of warring on screen (blue screen over entire tab that read unauthorized software install, go to an at&t store now, or something) that also tripped Knox to = 1 (yes I had oem unlocked).
So at this point I will try anything.......Goin to try king root 4.8.2!
Thanks
Click to expand...
Click to collapse
well. I give up! for now......locked again. same as last time
rredlin said:
so with 44 views and no answers , I'm assuming there's no firmware for at&t?
those bastards!
Click to expand...
Click to collapse
ikr im stuck over here
which one is the modem
---------- Post added at 03:55 PM ---------- Previous post was at 03:54 PM ----------
ashyx said:
You need to flash all of them in the appropriate slots, but you probably can get away with just the modem. That should get your signal back.
Enable OEM unlock before rooting with Kingroot again.
You can't install twrp or supersu as you still have a locked bootloader.
Click to expand...
Click to collapse
which one is the modem
Man this worked great for me
Sent from my LGLS991 using XDA Free mobile app
Updating to Marshmallow FAILS... dm-verity verification failed... need to check drk
ashyx said:
Thank @envirocy for this. SM-T817OH1 firmware.
https://drive.google.com/file/d/0B1DaPxlq4YoQUXQ0NG5xVUpKUm8/view?usp=sharing
Click to expand...
Click to collapse
I sent my tablet to Samsung Repair a few weeks ago (they replaced the battery and LCD due to overheating /freezing up), and just got it back today in the mail. It had Android Marshmallow 6.0 on it when I sent it to them, when I got it back today it has Lollipop 5.1. I tried to update through system update, and when it restarted to flash the update, it failed.
So I tried to reset it back to stock in the Backup/Reset option in settings and when it restarted to reset to Factory, I got this message :
"dm-verity verification failed...
need to check drk"
So I flashed this stock ROM you provided here, hoping a clean slate would fix the problem, and it flashed perfectly in ODIN. Then I tried to update to Marshmallow again, and after it downloaded and restarted to update it said "FAILED"
I have no idea how to update now.
How in the world does Samsung repair then send back a tablet that can't update!
Can you please help in any way?
I really don't want to send my tablet back for a third time and wait 2-3 more weeks, especially after the Samsung Note 7 recall, probably take months to get back. My wife is still waiting for her Note 5 screen to be replaced and they have had her phone almost a month now.
xdaDemiGod said:
I sent my tablet to Samsung Repair a few weeks ago (they replaced the battery and LCD due to overheating /freezing up), and just got it back today in the mail. It had Android Marshmallow 6.0 on it when I sent it to them, when I got it back today it has Lollipop 5.1. I tried to update through system update, and when it restarted to flash the update, it failed.
So I tried to reset it back to stock in the Backup/Reset option in settings and when it restarted to reset to Factory, I got this message :
"dm-verity verification failed...
need to check drk"
So I flashed this stock ROM you provided here, hoping a clean slate would fix the problem, and it flashed perfectly in ODIN. Then I tried to update to Marshmallow again, and after it downloaded and restarted to update it said "FAILED"
I have no idea how to update now.
How in the world does Samsung repair then send back a tablet that can't update!
Can you please help in any way?
I really don't want to send my tablet back for a third time and wait 2-3 more weeks, especially after the Samsung Note 7 recall, probably take months to get back. My wife is still waiting for her Note 5 screen to be replaced and they have had her phone almost a month now.
Click to expand...
Click to collapse
Try Device Recovery with Kies. That's how I upgraded to Marshmallow.
hello,
sorry for upping this offtopic.. but i have sm-t817a at&t carrier tablet, and how can i change official firmware to custom. i can't find any information about this in web... please help me
Same problem kinda
serik1986 said:
hello,
sorry for upping this offtopic.. but i have sm-t817a at&t carrier tablet, and how can i change official firmware to custom. i can't find any information about this in web... please help me
Click to expand...
Click to collapse
Hello, I own samsung galaxy tab s2 SM-T817A baseband version
T817AUCU1AOH2
The problem is that it is stuck on lollipop and i think i need to insert att sim to get update but the problem is that i live in Pakistan i have tried many times to update it but nothing works for me.i have galaxy tab a t550 as well and it runs nougat.i need to get the 7.0 firmware for my tab s2 so i can flash it i cannot find the firmware anywhere else please help me to upgrade my tab s2 to nougat
AT&T Galaxy Tab S2 SM T-817A Nougat firmware T817AUCU2CQE3 here:
http://combinefile.com/home/browse/category/id/9448/T817AUCU2CQE3
colins said:
AT&T Galaxy Tab S2 SM T-817A Nougat firmware T817AUCU2CQE3 here:
http://combinefile.com/home/browse/category/id/9448/T817AUCU2CQE3
Click to expand...
Click to collapse
thx,i update my s2,it's free download.
This worked for me as well; was able to go straight from 5.1.1 (OH2) to 7.0 (QE2) via the link above and Odin 3.12.7. Didn't need to flash any intermediate versions.
houtaobbs said:
thx,i update my s2,it's free download.
Click to expand...
Click to collapse
Please upload to gdrive, link not work.
Thanks.
Alexander Kalinin said:
Please upload to gdrive, link not work.
Thanks.
Click to expand...
Click to collapse
Try this
https://firmware.gem-flash.com/index.php?a=browse&b=file-info&id=28744
It's the same firmware as Colins'

G925A PK5 stock repair and for OTA 7.0

free stock G925A PK5 enjoy to all
https://drive.google.com/file/d/0BzC9XVTtkueFc2xOV3ZPRzBEMFE/view
Has anyone worked for you?
Has anyone worked for you?[/QUOTE]
It worked with mine,
https://youtu.be/DdrxKKvqB3s
ODIN?
Edgardo Regazzoni said:
ODIN?
Click to expand...
Click to collapse
yah odin
Thx
Can i odin this directly on PD6?
aayushsapkota said:
Can i odin this directly on PD6?
Click to expand...
Click to collapse
yes
I used this and it works fine. Thank you for the link. Saved my day.
Aeryes said:
I used this and it works fine. Thank you for the link. Saved my day.
Click to expand...
Click to collapse
at the top of this post, there is a 2.1gb file, i downloaded it... tried my hard to sideload with adb, it's showing error and i unzipped it and tried with odin, and got the same old 6.0.1. android! what do i do? :S I even tried to install TWRP image for other s6 edge but failed as this at&t phone does not allow to install me that. what do i do? where did I do wrong? can anyone guide me with details? I am gonna do it today! please someone help me with this. even from the first android N for s6 edge of at&t which is gm952a, i downloaded both the file, first one i did with odin like the post says, second one i tried numerous time with adb side bootloader but same error. what do I do? :S please help! S.M.S
wherer is pd6 download link? :S anyone? :S
when you do this in odin which one do you use > the AP only? or all of them
need some help. I followed the steps above and i successfully installed nougat. But now my imei is unknown. Is there a fix for this? Thanks for the help in advance.
link is dead, any mirrors?
Link
Link is dead... Does anyone have it?
Odin
How long is it supposed to be running on ODIN? It's been stuck on "<ID:0/005> meta-data/fota.zip" for a little over an hour...
Any help is appreciated

//G935A\\ Oreo 8.0 Latest Stock ATT Odin files G935AUCUBCTB1

Full ODIN stock ATT files.
Download one file, unzip to 4 files, put in ODIN and flash.
I take no responsibility if anything goes wrong. You don't need to be on certain baseband to flash this, you can flash this directly from any baseband version to this.
Download link: https://androidfilehost.com/?fid=4349826312261781275
Download link2: https://drive.google.com/uc?id=1U8sicXsI2ZDZa8lY08zWFjjhxoqDputF&export=download
Download link for Odin 3.13.1: https://odindownload.com/download/Odin3_v3.13.1.zip
Download link for Odin3_v3.13.1_3B_PatcheD: https://androidfilehost.com/?fid=5862345805528067949
If i helped you don't forget to hit thanks button
My dude! I just want you to know that you are loved by some random guy in some other part of the US.
This update bricked my phone
Sent from my iPhone using Tapatalk
rattlingabhi said:
This update bricked my phone
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Im sorry to hear that, can you try to flash the firmware again with Odin
stek-kravari said:
Im sorry to hear that, can you try to flash the firmware again with Odin
Click to expand...
Click to collapse
I already flashed my phone with a G935U firmware.
Sent from my iPhone using Tapatalk
hey there, I know it has been a few months and I was just curious if you got your hands on any newer AT&T full ODIN firmware for the Edge? I just wanted to pull a more recent CSC out of it.
origitat said:
hey there, I know it has been a few months and I was just curious if you got your hands on any newer AT&T full ODIN firmware for the Edge? I just wanted to pull a more recent CSC out of it.
Click to expand...
Click to collapse
Link updated, it isn't the newest G930AUCS8CRL1 but i hope it helps you
stek-kravari said:
Link updated, it isn't the newest G930AUCS8CRL1 but i hope it helps you
Click to expand...
Click to collapse
Thank you so much! It looks pretty close to the newest to me!
Latest G935AUCU8CSA3 firmware link is up, check first post
Hello!
Help please return to Android 8 on your phone Samsung Galaxy S7 Edge which after firmware [Up_vnROM.net] _COMBINATION_ATT_FA60_G935AUCU9ASA1.rar is back on Android 6 and calls and other programs do not work ...
And the attempt to flash through ODIN android 8 does not work ...
How can I flash my phone now?
Latest G935AUCS9CSB1 full firmware will be posted later today
dude thank you again. no clue how you get these but it is great!
origitat said:
dude thank you again. no clue how you get these but it is great!
Click to expand...
Click to collapse
https://easy-firmware.com
stek-kravari said:
Latest G935AUCS9CSB1 full firmware will be posted later today
Click to expand...
Click to collapse
Which is the recommended odin to use? The original 3.13.1 or the patched one?
ezeq2000 said:
Which is the recommended odin to use? The original 3.13.1 or the patched one?
Click to expand...
Click to collapse
Patched Odin
safe?
stek-kravari said:
Full ODIN stock ATT files.
Download one file, unzip to 4 files, put in ODIN and flash.
I take no responsibility if anything goes wrong. You don't need to be on certain baseband to flash this, you can flash this directly from any baseband version to this.
AP_G935AUCS9CSB1_CL15151201_QB21995601_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G935AUCS9CSB1_CL15151201_QB21995601_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G935AUCS9CSB1_CP11878139_CL15151201_QB21995601_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_G935AATT9CSB1_CL15151201_QB21995601_REV02_user_low_ship_MULTI_CERT.tar.md5
Download link: https://drive.google.com/file/d/1bow1pfoeGc2D5DcKAXzxxcG4lwosVMSd/view
Download link for Odin 3.13.1: https://odindownload.com/download/Odin3_v3.13.1.zip
Download link for Odin3_v3.13.1_3B_PatcheD: https://androidfilehost.com/?fid=5862345805528067949
If i helped you don't forget to hit thanks button
Click to expand...
Click to collapse
i have android 7 on my s7 Edge, can i follow this guide and dont brick my phone? anyone try and go right? i dont want a brick Hahaha
L.law1iet said:
i have android 7 on my s7 Edge, can i follow this guide and dont brick my phone? anyone try and go right? i dont want a brick Hahaha
Click to expand...
Click to collapse
Yes, download the firmware, put everything in Odin and flash
stek-kravari said:
Yes, download the firmware, put everything in Odin and flash
Click to expand...
Click to collapse
any chance you have revision 4 of the SM-G935U firmware on oreo?
Thanks you repaired my phone !
This worked for my phone but now im getting an error with my recovery menu saying it doesn't exist. I saw an earlier post with the same problem.
I bought this phone used and now its saying that i am not the original account signed in to the phone. I took it to the 2nd hand shop i bought it from and they want to charge me money to fix the problem when i remember signing in first thing to the phone. Im not to savi with these things but did installing this firmware change my user data?

Categories

Resources