To use this, you will need Alsa Mixer, Gscript lite, and terminal emulator from Play Store.
TYPE EVERYTHING WITHOUT QUOTES!!
IT WILL BOOST HEADPHONE SOUND ONLY!
IF MUSIC STOPS, YOU SHOULD TOUCH IT AGAIN!
First, open terminal emulator, type "su", it will ask for root acces, allow it.
Then, we should mount the system as RW: "mount -o rw,remount,rw /system"
We made it RW, now don'T close the terminal emulator, just open alsa mixer, set "HISSC_SMT_HSL_GAIN" and "HISSC_SMT_HSR_GAIN" to 15.
Then, go back to terminal emulator, type "alsa_ctl store".
Now, we made the changes to system, so we can mount it to RO again: "mount -o ro,remount,ro /system"
We remounted it as RO, now open Gscript lite, press Add script, give the name you want, and it needs su, so tick it. In the bigger box, type "alsa_ctl restore", press save. Try to run it, it'll ask for root, allow it. Now, we've done with the script, go to your launcher, and add the gscript widget to your homescreen, pick your script, and the next time you launch it from your desktop, it should work.
Related
I am willing to pay someone if someone can figure out how to remove factory apps like
facebook
footprints
peep
quickoffice
stock
visual vm
stock massages
i never use them for some reason they run in the background
Just take a look at this thread from the android forums
http://androidforums.com/all-things-root-eris/53646-unwanted-apps.html
NOTE: you MUST have ROOT in order to remove those apps.
If the instructions in that thread about "adb" are too complicated for you, then go buy the Root Explorer app, navigate to the folders you were told to in the thread, click the "r/w" button at the top of the app, then long press on the files you are told to delete.
Deleting system apps is risky if you delete the wrong ones. As usual, you are responsible if anything happens.
As I see it, you must have root to modify system files on your ROM (anyone correct me if I'm wrong)
But I was able to use Titanium Back up (downloaded from the Android market, free) to see all installed programs and I successfully deleted Visual VM, Peep, and stock messages... I use the others...
now so far, my ROM that is installed [2.1 version .3] hasn't had any problems with the removal of these system programs, So I think it is a safe method.
I believe this is a good alternative to adb commands... since you know what you are deleting.
and of course, I am not responsible if you do happen to mess your phone up.
C:\Users\admin\Desktop>cd android-sdk-windows
C:\Users\admin\Desktop\android-sdk-windows>cd tools
C:\Users\admin\Desktop\android-sdk-windows\tools>adb shell
$ mount -0 rw,remoun /dev/block/mtdblock3 /system
mount -0 rw,remoun /dev/block/mtdblock3 /system
mount: invalid option -- '0'
BusyBox v1.15.0 (2009-08-25 15:17:43 BST) multi-call binary
Usage: mount [flags] DEVICE NODE [-o OPT,OPT]
Mount a filesystem. Filesystem autodetection requires /proc be mounted.
Options:
-a Mount all filesystems in fstab
-f Dry run
-r Read-only mount
-w Read-write mount (default)
-t FSTYPE Filesystem type
-O OPT Mount only filesystems with option OPT (-a only)
-o OPT:
loop Ignored (loop devices are autodetected)
[a]sync Writes are [a]synchronous
[no]atime Disable/enable updates to inode access times
[no]diratime Disable/enable atime updates to directories
[no]relatime Disable/enable atime updates relative to modification ti
me
[no]dev (Dis)allow use of special device files
[no]exec (Dis)allow use of executable files
[no]suid (Dis)allow set-user-id-root programs
[r]shared Convert [recursively] to a shared subtree
[r]slave Convert [recursively] to a slave subtree
[r]private Convert [recursively] to a private subtree
[un]bindable Make mount point [un]able to be bind mounted
bind Bind a directory to an additional location
move Relocate an existing mount point
remount Remount a mounted filesystem, changing its flags
ro/rw Read-only/read-write mount
There are EVEN MORE flags that are specific to each filesystem
You'll have to see the written documentation for those filesystems
$ cd /system/app
cd /system/app
$ 1s
1s
1s: permission denied
$
this is what i get am i doing something wrong here
Type adb shell than su and tell me what happens.
binny1007 said:
Type adb shell than su and tell me what happens.[/QUOTE
never mind i got it to work i used different method i bought the titanium backup. show all the installed apps easy to uninstall it works great now my phone is running much faster thanks for all the help
Click to expand...
Click to collapse
FYI, you were typing the commands wrong.
Right after you do "adb shell" you'll need to type "su" and the $ prompt should change to a # prompt. Check your phone as well after typing "su" as you should see a popup asking for permission.
$ mount -0 rw,remoun /dev/block/mtdblock3 /system
Click to expand...
Click to collapse
should be: mount -o rw,remoun /dev/block/mtdblock3 /system
The -o is the letter o, not a zero.
$ 1s
Click to expand...
Click to collapse
Should be: ls
That's the letter l (lowercase L), not a one.
grdlock, I believe there is a "t" missing in your post:
mount -o rw,remount /dev/block/mtdblock3 /system
Ahh, ya, you're right. I just copied/pasted what he wrote and didn't catch that.
ampinc said:
binny1007 said:
Type adb shell than su and tell me what happens.[/QUOTE
never mind i got it to work i used different method i bought the titanium backup. show all the installed apps easy to uninstall it works great now my phone is running much faster thanks for all the help
Click to expand...
Click to collapse
Glad to know it works for someone else as well
Click to expand...
Click to collapse
I just downloaded Titanium Backup and deleted the "worldclock.apk" and I have to say it's a nice app, (Titanium that is)
So far, from the VanillaDroid ROM, I've deleted the following with no ill effects:
Stocks
Weather ( I use WBug)
Visual Voicemail
Browser ( I use Dolphin)
Quickoffice
MMS
Talk
Mail
Deskclock
I would like to delete the following but am having some difficulty finding the correct "apk"
Camcorder (I think it's built into the camera?)
Call History
People Search
Settings (just the app in the drawer, another NAND before I do this I guess)
Voice Dialer
Voice Search
Voice Record
NaviPanel ***Anyone know if this will mess with Maps?***
FACEBOOK !!!! I deleted the "Facebook.apk" but the FB app is still in the drawer and it still works fine. If anyone could help me with deleting this one I would be forever greatful! Trying to delete it using Titanium, it says: "cannot find Facebook.apk" But it's still friggin there......argh!
Edit: Woohoo! Facebook is gone.
Titanium tells me it needs root acess and that's out of question. Then again, I'm on the lg ally and it might be different... idk. Any other suggestions?
So I have my DX overclocked, but I wanted to be able to change the clock while away from my PC if something goes wrong. Currently on boot it sets the CPU to whatever I had it on before powering the phone off. Now I have all setscaling.sh files on my SD card and can't get a script to copy the files over. I can do this long hand in Terminal. These commands are exactly what I typed into Terminal to get the clock rate to change, but when I throw them into a script exactly as typed below I get all kinds of errors, starting with not being able to mount my SD card.
mount -o rw,remount -t ext3 /dev/block/mcblk1p21 /system
cp /sdcard/setscaling.sh /system/xbin/setscaling.sh
mount -o ro,remount -t ext3 /dev/block/mcblk1p21 /system
setscaling.sh
EDIT:
So I did a little testing, and it looks like even if I mount the system before running the copy command and setscaling.sh they still don't work. Is this just an anti terminal thing, or what? If I type each command by hand they work, but any of them in a script and it either gives me an error, or doesn't. Either way it doesn't do what I want.
Use root explorer to copy the files over to their appropiate system folders. (Remember to to mount r/w or it wont allow you to make changes to the system folder)...then long press the setscaling.sh and hit execute..Now go to SETCPU->autodetect-> now adjust your frequencies as you wish.
zehkaiser said:
So I have my DX overclocked, but I wanted to be able to change the clock while away from my PC if something goes wrong. Currently on boot it sets the CPU to whatever I had it on before powering the phone off. Now I have all setscaling.sh files on my SD card and can't get a script to copy the files over. I can do this long hand in Terminal. These commands are exactly what I typed into Terminal to get the clock rate to change, but when I throw them into a script exactly as typed below I get all kinds of errors, starting with not being able to mount my SD card.
mount -o rw,remount -t ext3 /dev/block/mcblk1p21 /system
cp /sdcard/setscaling.sh /system/xbin/setscaling.sh
mount -o ro,remount -t ext3 /dev/block/mcblk1p21 /system
setscaling.sh
EDIT:
So I did a little testing, and it looks like even if I mount the system before running the copy command and setscaling.sh they still don't work. Is this just an anti terminal thing, or what? If I type each command by hand they work, but any of them in a script and it either gives me an error, or doesn't. Either way it doesn't do what I want.
Click to expand...
Click to collapse
Here's what i did after reading the original thread.
1. Go to the market and get "Gscript lite".
2. Run Gscript.
3. Press your hard menu button.
4. Press "Add script"
5. Name it anything in the name field.
6. Make sure "Needs SU" has the green check mark.
7. Ignore "Load file"
8. Enter your script in the field...
Code:
insmnod /system/lib/modules/overclock.ko
setscaling100.sh
do not start your script with "su" or "sh" and do not end with either of those. Of course if your file is named "setscaling.sh" then enter that name in the script.
9. save.
10. Optional and handy - go to home screen. Long press. Add shortcut. Scroll to Gscript. Select it. Select the script you created to place a shortcut on your home screen.
11. When ever you reboot- hit the shortcut and it will start you overclocking.
If you want to check that the script executed properly - using "android terminal" from market you can enter...
Code:
su
cat /proc/overclock/mpu_opps
it will lest your clock speeds for you. You can also use gscript to create a script for this. Leave out "su" and enter only the "cat" line.
good luck.
Is this so i can push files through my phone, without having to do it on the computer? How does this work. Anyone have a link? I did a search and came up with nothing. Just wondering, thanks!
It's the same as a Terminal on a unix/linux box or for that matter, command line on a windows box.
Terminal emulator app will give you command line access to your (rooted) phone. You can then go into SU mode, as well.
Yes, you are correct, it will allow you to do things that an ADB shell would allow, from a computer.
You can download it from the market.
im sure that you might have known this already, but when you are using a terminal emulator, and you get root access (su), you really should follow the directions to the letter. if you make a mistake in the typing, it is possible that you could do some damage.
it is also recommended to not enter in terminal commands unless someone with more experience than you (based off their post number) reports success in completing the wanted task. so essentially, use the terminal at your own risk.
(all this is pulled from my previous post which you can find in my signature - "Terminal/adb shell commands")
Adb commands are completely different than terminal commands.
First enter "su" to get substitute user (the # sign)
Then enter "mount -o remount,rw -t yaffs2 /dev/block/mtdblock4 /system" to make the root r/w
to copy files use "cp" command
to move files use "mv" command
to remove files use "rm" command
to change file/dir permissions use "chmod"
to change directories use "cd" - "cd .." will bring you back one directory - "cd //" brings you back to root
to list files in the dir use "ls"
to read/mod/combine a file use "cat"
to edit a value use "echo"
to see running processes use "top"
to kill a process use "kill -9 PID#HERE"
ex) cp /sdcard/download/myapplication.apk /data/app/myapplication.apk
If you know any linux commands then you should know your way around terminal emulator. If you want i can give you more examples just let me know. Hope this helped
What does "cat" mean?
Oh my bad i didn't see it in there, all the times i lookedO sorry.
where could i get this app?
i couldnt find it on market using keyword "terminal", "terminal emulator" or even "adb terminal emulator"
bla.k.offee said:
where could i get this app?
i couldnt find it on market using keyword "terminal", "terminal emulator" or even "adb terminal emulator"
Click to expand...
Click to collapse
https://market.android.com/details?id=jackpal.androidterm&feature=search_result
Terminal Emulator Hell!!!!
I have wiped and restored more times tonight than I can count....HELP!!!! I have a very lean rom. So lean it that it has no file explorer and I don't want to install gapps. All I want to do is install Titanium Backup (the .apk file is on the root of my SD card) with the terminal emulator and I'll be all set. I have had all different error messages, and I'm more confused now then when I started this adventur, 6+ hours ago. Any help would be great.
hockeyfamily737 said:
I have wiped and restored more times tonight than I can count....HELP!!!! I have a very lean rom. So lean it that it has no file explorer and I don't want to install gapps. All I want to do is install Titanium Backup (the .apk file is on the root of my SD card) with the terminal emulator and I'll be all set. I have had all different error messages, and I'm more confused now then when I started this adventur, 6+ hours ago. Any help would be great.
Click to expand...
Click to collapse
I keep TB on the root of my sdcard named TB.apk. Then I go into terminal emulator (it is in most roms already).
su
cp /sdcard/TB.apk /data/app/TB.apk
Then I back out of TE and TB is installed. Any commands you type in TE are case sensitive. All file names are case sensitive and spaces do not work well. So if your TB apk is "Titanium Backup-1.3.3.apk", I would rename it to something without the spaces like Titanium_Backup-1.3.3.apk.
I rename it TB.apk because who wants to type all of that?
kyouko said:
(all this is pulled from my previous post which you can find in my signature - "Terminal/adb shell commands")
Adb commands are completely different than terminal commands.
First enter "su" to get substitute user (the # sign)
Then enter "mount -o remount,rw -t yaffs2 /dev/block/mtdblock4 /system" to make the root r/w
to copy files use "cp" command
to move files use "mv" command
to remove files use "rm" command
to change file/dir permissions use "chmod"
to change directories use "cd" - "cd .." will bring you back one directory - "cd //" brings you back to root
to list files in the dir use "ls"
to read/mod/combine a file use "cat"
to edit a value use "echo"
to see running processes use "top"
to kill a process use "kill -9 PID#HERE"
ex) cp /sdcard/download/myapplication.apk /data/app/myapplication.apk
If you know any linux commands then you should know your way around terminal emulator. If you want i can give you more examples just let me know. Hope this helped
Click to expand...
Click to collapse
Sent you a pm
#Root/Hack_Mod-Always®
I have been experimenting with my new droid/milestone the past couple of days, odd problems which I am past now but still curious about.
Firstly after flashing the 2.1 sbf with rsd it will autoboot and screen slider will be there, then when I reboot, screen slider will be missing. This only happend when I flashed an sbf from the sbf site(2.1 uk version, not service), doing a factory reset didn't have any problem -could reboot as many times and slider would be there.... then suddenly after factory boot it would dissapear after first boot. Anyway solved this problem by installing screen mode widget after first boot after flash, solved problem, but still weird. Fixed this now but still curious about it.
Next, nandroid backup is missing from recovery menu, I have rooted and can execute root commands after typing "su" via Android Terminal emulator, so pretty sure is rooted. So why no nandroid? I thought I could do nandroid backup after rooting.
Next busybox won't install, tried the app, did the "searching system" for over an hour(not exagerrating), eventually gave up and uninstalled.
Trying to do a "manual busybox install" now, using this guide:
Busybox How-to? - Android Forums
Can't execute commands via usb/adb in recovery mode as the other guy suggested so been trying these commands both with terminal emulator on phone, and usb-debugging mode with windows shell. Using these I can go "su" and type "ls" to see files on my droid phone....but when I try to "mount /system" or /sdcard from windows I just get a print about mount options, when I try to "cat /sdcard/busybox > /system/xbin/busybox" I get a "file is read only" error.
I would like advice on how to install busybox, I would like to do it manually(because the app seems to not work for me, remember I waited over an hour while it "searched") and I want to learn to manually do stuff anyway. I tried to chmod /system/xbin too, but that didn't seem to change it from read only.
Also any thoughts on why nandroid backup is missing from my recovery menu even though my droid is rooted. I thought it was meant to appear.
I am still learning and researching, and appreciate any links or tips.
droidtech1 said:
Next, nandroid backup is missing from recovery menu, I have rooted and can execute root commands after typing "su" via Android Terminal emulator, so pretty sure is rooted. So why no nandroid? I thought I could do nandroid backup after rooting.
Click to expand...
Click to collapse
This is odd. Which OpenRecovery did you install? Androidiani? GOT? Or the "original" OpenRecovery? Are you aware, that you come into OpenRecovery by starting Recovery Mode and apply update.zip?
droidtech1 said:
Next busybox won't install, tried the app, did the "searching system" for over an hour(not exagerrating), eventually gave up and uninstalled.
Trying to do a "manual busybox install" now, using this guide:
Busybox How-to? - Android Forums
Click to expand...
Click to collapse
Using the app from the market worked like a charm for me. No idea, what might have gone wrong for you...
droidtech1 said:
Can't execute commands via usb/adb in recovery mode as the other guy suggested so been trying these commands both with terminal emulator on phone, and usb-debugging mode with windows shell. Using these I can go "su" and type "ls" to see files on my droid phone....but when I try to "mount /system" or /sdcard from windows I just get a print about mount options, when I try to "cat /sdcard/busybox > /system/xbin/busybox" I get a "file is read only" error.
Click to expand...
Click to collapse
For remounting, try "mount -o rw,remount /dev/block/mtdblock6 /system" and for undoing this, use "ro" instead of "rw".
droidtech1 said:
I would like advice on how to install busybox, I would like to do it manually(because the app seems to not work for me, remember I waited over an hour while it "searched") and I want to learn to manually do stuff anyway. I tried to chmod /system/xbin too, but that didn't seem to change it from read only.
Click to expand...
Click to collapse
You should download busybox and put the "busybox"-file in the directory /sdcard. After that do:
Code:
# su
# mount -o rw,remount /dev/block/mtdblock6 /system
# cp /sdcard/busybox /system/xbin
# cd /system/xbin
# chmod 755 busybox
# ./busybox --install
# mount -o ro,remount /dev/block/mtdblock6 /system
One thought at the end: How did you root?
I rooted by flashing "vunerable recovery" using RSD lite, copied milestone-root.zip to sd card, renamed it update.zip, rebooted into recovery mode, flashed update.zip from there.
I didn't realise I had to install something like open recovery, think because I remember not having to do that on my pulse? Anyway will try and install one of those now.
Thanks those commands at the end helped, actually managed to copy busybox to /system/xbin, however the 2nd last one "./busybox --install" gave me a load of errors -all being no such file or directory, for example "/usr/bin/wc: no such file"
about 30 of those path errors. Maybe the command path "./busybox" needs to be something else?
ah, okay. sorry, I thought you already installed an openrecovery. for many cool features you will need it (e.g. nandroid, for overclocking it's not a must but a nice-to-have). please don't use GOT, it's rather old already. androidiani is okay, I think.
I think your previous attempts to install busybox via the app etc. mixed up some internal links in the device. please reboot and try again (the above steps except the "cp ..."). seems like the app tried to install busybox to /usr/bin but failed... I hope this failed attempt will be fixed by a simple reboot. otherwise it would be great to have the output of:
Code:
# su
# ls /usr/bin
No I re-flashed my main sbf and also did a factory reset to do a clean start, only thing since that full wipe I have done is rooting in the method I described, installed the screenmode widget, textedit, and android terminal emulator.
I have no such file /usr, are you sure I should have this in droid/milestone?
Here is my full output of my root system using ls:
tmp
pds
cdrom
sqlite_stmt_journals
config
cache
sdcard
d
etc
system
sys
sbin
proc
init_prep_keypad.sh
init.rc
init.mapphone_umts.rc
init.mapphone_cdma.rc
init.goldfish.rc
init
default.prop
data
root
dev
perhaps "/usr" is a sub inside one of the above folders? I tried using "find" to find it but that command dosn't seem to work since it won't even find the ones I can see with ls
I found it, /usr is inside /system... so if busybox was moved to /system/xbin, I'm guessing the ./ means install it to the parent directory which was /system which /usr is also in.
The errors I got said no such file "/usr" so It seems like it is trying to install to the wrong directory.... perhaps the command should be "busybox --install" or "/busybox --install" I don't want to experiment and mess things up before your opinion on this.
*edit almost forgot, output of /system/usr is
keychars
bin
srec
keylayout
share
output of /system/usr/bin is
panic_daemon
gki_pd_notifier
nvm_daemon
clean_dex.sh
brcm_guci_drv
bplogd_daemon
This is really strange. Maybe your busybox-file is corrupt.
Where did you download the busybox-file?
Which sbf did you flash?
So for explanation-purposes: When you put an executable or script file in any directory, you can execute it by first making it executable ("chmod 755 /system/xbin/busybox"), changing to that directory ("cd /system/xbin") and then executing it by adding "./" in front of it. The dot slash always stands for the _current_ directory. The _parent_directory has two dots "../".
If you want, you may try:
# /system/xbin/busybox --install
instead of
# ./busybox --install
Or maybe try this one:
# /system/xbin/busybox --install -s /system/xbin
Last time, I installed busybox into the directory /data/busybox, which worked brilliantly, but this path turned out to be unpractical. So I wanted to reinstall it in a different directory. I removed everything from /data/busybox including the directory itself and tried to start the whole procedure with /system/xbin. But that time it protested, that there were no files in "/data/busybox/...". Conclusion: The last busybox-install affected the second one. When I remember correctly I rebooted after that and used the app from the market *g*
My main sbf I flashed was android 2.1(uk version).
I downloaded busybox 1.17.2(won't let me post url here), was from droidforums dot net.
I don't remember if I tried all of his commands, but the last one on that forum seems to have worked.. I think......... it was:
"busybox --install /system/xbin/"
After remounting with your commands and typing the above command, I didn't get any errors, I synced and rebooted and now when I "ls /system/xbin" it shows a bunch of files/names which look like busybox commands. When I type "busybox" it outputs a bunch of commands too... so I am guessing this means it has succesfully installed? I can't say I tried these before attempting install so I have no comparison but I assume I would have a different output if busybox wasn't installed.
So assuming it worked, why would
"busybox --install /system/xbin/" work, and
"/system/xbin/busybox --install" not?
I also managed to install open recovery and do a nandroid backup succesfully
I have another short question, not specific to android but happens in all terminals I use, windows and linux alike. Sometimes I cannot execute commands anymore and it just becomes text in the terminal(just re-echo'ing my text output, without executing any functions)... can't remember specifically when it happened on my windows or linux pc shells, but on my android it happens whenever I have to give "SU" permission to the terminal, I have to quickly close the terminal and reload it again to get su access. I'm sure there is a name for this "state" where you are locked out of using commands in the shell and just typing text but I can't find a way to get out of it(without closing and re-opening terminal), there must be some key combination to be able to execute commands again in the current terminal session. If you have any idea what I am talking about?
Thanks for all your help so far.
droidtech1 said:
My main sbf I flashed was android 2.1(uk version).
Click to expand...
Click to collapse
Don't want to try one of the 2.2?
droidtech1 said:
I downloaded busybox 1.17.2(won't let me post url here), was from droidforums dot net.
I don't remember if I tried all of his commands, but the last one on that forum seems to have worked.. I think......... it was:
"busybox --install /system/xbin/"
After remounting with your commands and typing the above command, I didn't get any errors, I synced and rebooted and now when I "ls /system/xbin" it shows a bunch of files/names which look like busybox commands. When I type "busybox" it outputs a bunch of commands too... so I am guessing this means it has succesfully installed? I can't say I tried these before attempting install so I have no comparison but I assume I would have a different output if busybox wasn't installed.
Click to expand...
Click to collapse
Yes, this sounds very much like installation was successful.
droidtech1 said:
So assuming it worked, why would
"busybox --install /system/xbin/" work, and
"/system/xbin/busybox --install" not?
Click to expand...
Click to collapse
typing "busybox" without the path in front of it worked, because busybox is in the directory /system/xbin, which is already in your $PATH-variable (try "echo $PATH"). So the command interpreter (shell) will automatically look up "busybox" in /system/xbin.
I had a look at the busybox syntax and it's actually
Code:
busybox --install [-s] [INSTALLDIR]
So you have to put the directory you want to install in at the end. That's what your last command makes use of
droidtech1 said:
I have another short question, not specific to android but happens in all terminals I use, windows and linux alike. Sometimes I cannot execute commands anymore and it just becomes text in the terminal(just re-echo'ing my text output, without executing any functions)... can't remember specifically when it happened on my windows or linux pc shells, but on my android it happens whenever I have to give "SU" permission to the terminal, I have to quickly close the terminal and reload it again to get su access. I'm sure there is a name for this "state" where you are locked out of using commands in the shell and just typing text but I can't find a way to get out of it(without closing and re-opening terminal), there must be some key combination to be able to execute commands again in the current terminal session. If you have any idea what I am talking about?
Click to expand...
Click to collapse
Sounds like this is just the state, when shell is busy, i.e. when the last process you started is still running and no prompt ($ or #) is displayed. You may kill the last process in linux using CTRL+C, which will hopefully bring back the shell prompt. No idea which shortcut replaces this on the milestone/droid. I never use any android terminals, but only the ADB-Shell: http://developer.android.com/guide/developing/tools/adb.html
I'm learning to build apps for android so I thought having 2.1 on my droid would be better for testing (instead of 2.2). I also have a Nexus-S with 2.3 and a tmobile-pulse with 1.5. So I want to keep the most native version on each phone since most consumers won't install custom roms, although some will get updates anyway.
I use my droid a lot when I am out and use the terminal a lot so having busybox too has given me more to play around with. I actually find my droid much better working on than the nexus s, love the keyboard and dpad.
I have a problem.
I want to install AX8MT.Ko but I have to change the modules permission because every time when I write on terminal "insmod/system/lib/modules/ax8mt.ko telling me operation not permitted
I want a step-by-step tutorial for changing modules permission.
I will press thx button!
Sorry for my English!
fuuuuuuuuuuuuuuu said:
I have a problem.
I want to install AX8MT.Ko but I have to change the modules permission because every time when I write on terminal "insmod/system/lib/modules/ax8mt.ko telling me operation not permitted
I want a step-by-step tutorial for changing modules permission.
I will press thx button!
Sorry for my English!
Click to expand...
Click to collapse
You have to enter "su" first - only root is allowed to load or unload kernel modules!
B.Jay said:
You have to enter "su" first - only root is allowed to load or unload kernel modules!
Click to expand...
Click to collapse
I write but the same result
You need Root Explorer for doing this.
You can buy it on the market, or search on google for a cracked apk.
In RE, you go to the folder and long-press on the module, and in the menu choose "change permissions".
I did this but don't work, any ideas?
In Root Explorer, you need to mount the /system partition as rw first.
To do this, click on the small button in the right corner of your screen.
After that, you can set the permissions, delte or edit files and other things you can do in a file explorer
codfreak said:
In Root Explorer, you need to mount the /system partition as rw first.
To do this, click on the small button in the right corner of your screen.
After that, you can set the permissions, delte or edit files and other things you can do in a file explorer
Click to expand...
Click to collapse
I did this because I can't. change permission if I don't press the little button. I want a master member
You know, all you have to do is READ ...
1. Copy ax8mt.ko to your SD card
2. Start Root Explorer and navigate to /sdcard
3. LONG press ax8mt.ko and select "MOVE"
4. Navigate into /system/lib/modules
5. Press "Mount r/w"
6. Select "Paste"
7. LONG press ax8mt.ko and change permissions to
r w -
r - -
r - -
8. Exit Root Explorer
9. Open the terminal
10. Type (followed by enter after each line)
su
insmod ax8mt.ko
Alternatively you can do the whole thing in just the terminal (assuming you already copied ax8mt.ko to your SD card):
Type:
su
cp /sdcard/ax8mt.ko /system/lib/modules
chmod 644 /system/lib/modules/ax8mt.ko
insmod ax8mt.ko
If you can't get this simple thing done you better don't even keep on trying.
B.Jay said:
You know, all you have to do is READ ...
1. Copy ax8mt.ko to your SD card
2. Start Root Explorer and navigate to /sdcard
3. LONG press ax8mt.ko and select "MOVE"
4. Navigate into /system/lib/modules
5. Press "Mount r/w"
6. Select "Paste"
7. LONG press ax8mt.ko and change permissions to
r w -
r - -
r - -
8. Exit Root Explorer
9. Open the terminal
10. Type (followed by enter after each line)
su
insmod ax8mt.ko
Alternatively you can do the whole thing in just the terminal (assuming you already copied ax8mt.ko to your SD card):
Type:
su
cp /sdcard/ax8mt.ko /system/lib/modules
chmod 644 /system/lib/modules/ax8mt.ko
insmod ax8mt.ko
If you can't get this simple thing done you better don't even keep on trying.
Click to expand...
Click to collapse
do you know another mod to enable dualtouch for games.