Database Develop

My g1 no longer supports adb and fastboot via pc

NOTE: my problem is not like the other two threads where usb mass storage dosent work...
I can successfully mount my sd card on my pc via the notification ITS just the problem of developing/debuging connections made between G1 and PC
Somebody please help me I have adp1 when I bought all was fine but recently, don't know why bubuging dosent work means all adb and fastboot commands don't work on my g1 I have tried re installing the drivers but they fail to install so it hangs at adb devices or saying waiting for device. Also I have tried installing ubuntu to do that but here too it says the same stuff waiting for devices
Even the usb debug mode is enabled....
I have also tried flashing rc29 then other jf versions but can't flash system images via fastboot even flashed HSPL again n now I am trying to flash system image via update.zip
Is it
"format SYSTEM"
"Write_raw_image system.img PACKAGE:SYSTEM" SOMETHING LIKE THIS found in JF update script what I have to include in update script ???
Please help...[/B]

I have the same problem, I can mount the sd card but now the G1 won't let me use adb or fastboot on two computers where it previously did : /

go into control panel and go to Device Manager and try uninstalling the usb mass storage device that corresponds with your device, then unplug and replug the usb to your phone and let it reinstall the drivers and see if that fixes it...
-BMFC

you can't write_raw_image:SYSTEM through and update, I've tried it before and it fails (I'm trying to determine why). I'd recommend flashing another rom (you can still use recovery, right?) and then trying. Try JF 1.51 since it's known good.
What did you do to the phone before loosing adb and fastboot.
Also, have you tried "adb root" and then "adb remount"?

sangeet.003 said:
NOTE: my problem is not like the other two threads where usb mass storage dosent work...
I can successfully mount my sd card on my pc via the notification ITS just the problem of developing/debuging connections made between G1 and PC
Somebody please help me I have adp1 when I bought all was fine but recently, don't know why bubuging dosent work means all adb and fastboot commands don't work on my g1 I have tried re installing the drivers but they fail to install so it hangs at adb devices or saying waiting for device. Also I have tried installing ubuntu to do that but here too it says the same stuff waiting for devices
Even the usb debug mode is enabled....
I have also tried flashing rc29 then other jf versions but can't flash system images via fastboot even flashed HSPL again n now I am trying to flash system image via update.zip
Is it
"format SYSTEM"
"Write_raw_image system.img PACKAGE:SYSTEM" SOMETHING LIKE THIS found in JF update script what I have to include in update script ???
Please help...[/B]
Click to expand...
Click to collapse
I had a problem with adb awhile back it was doing the same thing what I did was read the hell out of threads and I used this tool called USBDeview. I opened up the program and anything that had android or htc I uninstalled all the drivers, then I rebooted my cpu and plugged my phone into usb cord and it worked. Here's the link to the app http://www.softpedia.com/get/System/System-Info/USBDeview.shtml try it out its worth a shot

lol. Funny how you guys try and help him 6 months later.
Im sure he figured it out by now since he had no follow up for such a long time.

some ppl just dont read thats sad...u rght now they want 2 help..maybe they need help themselves

Some help is better then no help

try this
you should uninstall it and the reinstall it but this time pick chose from Pacific location or something like that and chose the htc adb interface device with the green icon i believe it is like the second one or something on it this is on xp computers i forgot what it looked like on my vista computer

I have two phones. ADB works on one but not the other. I device manager, HTC Android Phone USB device shows up for both but ADB interface only appears for one phone but not the other.
What gives?

maybe u should try the steps again------->>> http://forum.xda-developers.com/showthread.php?t=532719

[Q] How to install NVflash on windows 7 64bit

HI!
I want to install the brand new stock ICS build by Stefan Gündhör using NVflash (coming from stock 2.3.4). I followed the linked instructions on modaco (can´t post links) and installed the APX-drivers but discovered that i can´t run the NVflash.exe when i tried to test it, because i´ve got win7 64-bit OS on my pc?
I searched and read lots of threads but couldn´t find an answer.. I know this is a noob questions but does someone know how to make it run properly?
Thank you

Palm90 said:
HI!
I want to install the brand new stock ICS build by Stefan Gündhör using NVflash (coming from stock 2.3.4). I followed the linked instructions on modaco (can´t post links) and installed the APX-drivers but discovered that i can´t run the NVflash.exe when i tried to test it, because i´ve got win7 64-bit OS on my pc?
I searched and read lots of threads but couldn´t find an answer.. I know this is a noob questions but does someone know how to make it run properly?
Thank you
Click to expand...
Click to collapse
I am on Win7 x64 and everything worked like a charm.
Have you tried running "flashme.bat" in the folder?
Installation NVFlash version (under Windows): = Full wipe, and also wipes Internal SD (not External though)
download the ROM, unpack it with WinRar, 7Zip or similar to any folder you want
take battery out of phone, press VOL + AND VOL - simulataneously, and while doing this plug the phone via USB to your PC
screen of phone remains black, this is normal, but you should hear a sound that you plugged the device. Probably you have to install APX drivers at this point if you are asked.
assuming that you already installed APX drivers: run the "flashme.bat" file in the folder where you extracted the ROM
if your device is properly connected, a terminal window will be opened for some minutes, showing the Flashing progress
once flashing is done, the window closes or notifies you that it is finished. Wait 30 seconds and then unplug phone, put battery back in and boot your brand new ICS!
That's already it No complications to be feared. Enjoy!

Palm90 said:
HI!
I want to install the brand new stock ICS build by Stefan Gündhör using NVflash (coming from stock 2.3.4). I followed the linked instructions on modaco (can´t post links) and installed the APX-drivers but discovered that i can´t run the NVflash.exe when i tried to test it, because i´ve got win7 64-bit OS on my pc?
Click to expand...
Click to collapse
installed nvflash without a problem just few hours ago on win7 x64...
domfis explained the procedure well...
btw if your APX drivers weren't installed properly - try going into "My computer > properties > device manager" and check if there is an "!" under APX device (or something) - if it is > manually install the drivers from your hard drive (and specified folder where you've extracted the apx drivers)
hope we helped...

domfis said:
I am on Win7 x64 and everything worked like a charm.
Have you tried running "flashme.bat" in the folder?
Installation NVFlash version (under Windows): = Full wipe, and also wipes Internal SD (not External though)
download the ROM, unpack it with WinRar, 7Zip or similar to any folder you want
take battery out of phone, press VOL + AND VOL - simulataneously, and while doing this plug the phone via USB to your PC
screen of phone remains black, this is normal, but you should hear a sound that you plugged the device. Probably you have to install APX drivers at this point if you are asked.
assuming that you already installed APX drivers: run the "flashme.bat" file in the folder where you extracted the ROM
if your device is properly connected, a terminal window will be opened for some minutes, showing the Flashing progress
once flashing is done, the window closes or notifies you that it is finished. Wait 30 seconds and then unplug phone, put battery back in and boot your brand new ICS!
That's already it No complications to be feared. Enjoy!
Click to expand...
Click to collapse
60nine said:
installed nvflash without a problem just few hours ago on win7 x64...
domfis explained the procedure well...
btw if your APX drivers weren't installed properly - try going into "My computer > properties > device manager" and check if there is an "!" under APX device (or something) - if it is > manually install the drivers from your hard drive (and specified folder where you've extracted the apx drivers)
hope we helped...
Click to expand...
Click to collapse
thank you guys! you were a great help. I managed to flash te rom finaly )

u dont install nvflash,if you have apx drivers installed,just run flashme.bat from the ROM's folder and thats it...i am doing that right now and works... p.s. run as administrator is recommended...

[Q] One not detected properly in fastboot mode

Hi there,
I`ve got the following Problem:
My One is not detected properly in fastboot mode, adb works like a charm (all cmds working)
In fastboot mode windows says that the device cannot be started (code 10) and cmd cannot find the device and it`s also not charging in fastboot...
I`m using Windows 8 and I know that there are problems with driver signatures, so I disabled the checks through advanced boot, uninstalled all drivers and reinstalled them (the strange thing is, it worked like a charm with my HOX)
After that still the same issues... Then I uninnstalled the HTC drivers and tried the drivers from Google SDK and after that the drivers from PDAnet but nothing helped...
Then I read that there are Problems with USB3.0 and fastboot but I only got USB3.0. So I tried different USB ports and reconnected many times (about 30 times) and maybe the phone says "fastboot USB" but in cmd it`s still not detected...
As I said before with my HOX it worked like a charm... (also Win8 and USB3.0)
Any ideas?
Thanks for your help!
togx

Try disabling Fastboot in the Power Settings.

I tried it again with fastboot disabled but it still doesn`t work... :/

same problem here....

envoy_467 said:
same problem here....
Click to expand...
Click to collapse
hey envoy_467,
I found a solution for this issue:
It seems that microsoft´s own driver for the Intel USB3.0-Host breaks the support for several devices. You can install the Intel drivers for Win7 on Win8 (search google: Windows 8 and Intel USB3.0 host controller there should be a link to plugable. I´m not able to post links cause I don´t have enough posts...) but it only works with the Intel host.
Hope it will help you too!
greetz,
togx

usb device not recognized
I'm having a similar problem using windows 8, but I tried both my usb 2.0 and 3.0 ports but results in same problem. I have a t-mobile HTC One S (JB 4.1.1). Everytime I try to do the fastboot to get my token id my pc tells me my usb device is not recognized. Does anyone have any suggestions? Thanks in advance!

Try THIS

Sorry to bump this thread, but it's better than creating a new one.
Anyway, I have the same issue as the others here: fastboot won't work at all.
Btw, I've tried all possible solutions but installing the intel driver isn't possible due to a limitation on Windows + Intel 8 Series.
Windows 8, Intel 4th generation processor (8 Series/220) on a Gigabyte GA-Z87N-WIFI.
USB eXtensible Host Controller driver by Microsoft can't be modified to work with the Intel 8 Series driver. When trying to install it it says that my PC doesn't have the requirements to install the program (driver can be found here -- 8 Series ONLY!!) probably because I'm on Windows 8 (no, setting the app to run with Win7 compatibility mode doesn't work either).
Using Naked Driver 0.72..
Has anyone tried with a virtual machine? Maybe I could install Ubuntu on a VM to test it when I get the time.
Any other ideas?

VM doesn't work.. Since Windows won't recognize the phone while on fastboot that means that the VM Linux won't find the devide either.
LiveUSB won't install the android SDK either.. I'm stuck..

FIXED, kinda.. Workaround on Linux.
More info:
Just did it..
But not on Windows..
I've created a LiveUSB from Ubuntu 12.04 using the "Universal USB Installer" from: http://www.pendrivelinux.com/downloads/
When creating the LiveUSB I've created with 4gb (4096mb) of free space on a 16gb flash drive just in case, but you can make it work with a 4gb flash drive.
Then I installed the Android SDK.
Then I was able to use fastboot to change the CID to 11111111.. Working great.. Now let's download the developer ruu..
Tutorial used to install the SDK: http://askubuntu.com/questions/318246/complete-installation-guide-for-android-sdk-on-ubuntu
To run all commands faster, just type "sudo su" before starting. After that type "apt-get -f install" to clean everything.
Remember: To install anything the tutorial asks you have to use the command "apt-get install name-of-package", where the name is the item the tutorial says.
Go up to Step 4.
Download and Unzip/extract the AndroidSDK to the desktop (just the SDK, you don't need the full bundle).
Go to the unzipped folder, go to the Tools folder, double click "android", run in terminal, install the SDK and the TOOLS.
When finished, open a terminal window, navigate to your unzipped folder, than navigate to platform-tools and use the command "./adb" and "./fastboot" to work your magic..
Edit: Still not able to install the RUU..
At least now I have the phone ready.. Just have to find a new PC to install the RUU..

Q: USB Not Recognised while in Fastboot

Hey guys,
Wonder if you can all help me,
Im not new to Rooting, but i have never come across this error before, ive searched accross XDA and Google, but cannot for the life of me find a fix, found a couple of things about deleting a registry file, and installed the One drivers which i had downloaded from here. I Do not have HTC Sync installed.
When device is powered up normally and connected to USB it as fine. When i reboot the Device into fastboot and connect it, i get a Error saying USB Device not recognised.
When i goto device manager, its shows up as My One under HTC, but has a Yellow '!' in a triangle, when i click on properties it states a code 10 Device Fails To Start error.
Please help as this is really frustrating me... Ive tried everything! And i really dont want to re-set my whole laptop as i will lose ALOT of data!
Like i said, im not new to this, as been doing this since the days of the HTC HD2...Am i missing something? Having a thick moment?
Running Windows 8.1.
If anyone really knows what this could be and could possibly fix, let me know as have team viewer and would gladly let you connect to me to help me out (Donation for your time aswell)
Thanks in Advance!

Really simple mate, windows 8.1 isnt compatible with fastboot drivers for now. Only adb is working atm. So dont be scared, your phone have no problem, its only because you updated to 8.1
Sent from my HTC One using xda app-developers app
Edit: there is a possible fix if your computer is based on intel chipset usb 3.0. Just google something like Windows 8.1 fastboot fix. Otherwise I think you will need to wait or simply use another computer with win7 or 8.0 or maybe dual boot win7 or even boot win7 with a vm?
Edit 2: search the forum, there is a "how to" force win7 fastboot drivers installation on win8.

Perfect buddy worked a Treat! Thankyou so much! I was getting so frustrated haha!
Didnt know it was a problem with Windows, so just needed to change the search terms, do'h!
For all those that has the problem in the future, a link for the fix!
Clicky!
Mods, this can now be closed, fixed!

fastboot for windows 8.1 over linux and this is my option to work fastboot on win 8.1
load wubi (windows ubuntu installer) over the link http://wiki.ubuntuusers.de/Wubi
than install ubuntu, on harddrive C:// and reboot your Pc
Now you have a linux in your current system, you can remove ubuntu (linux) in Programms & feautures list in windows.
now reboot reboot the system and isntall in ubuntu fastboot.
you musst give in the terminal sudo apt-get fastboot
and now you can flash your bootloader in linux.
but you musst sudo bevor you type fastboot flash type sudo fastboot flash boot boot.img
adb is working to on linux
i love wubi <3
you say it is easy
gooogle wubi (windows ubuntu installer)

tried running ubuntu in a virtual machine still no go guess the vm needs the windows driver to see the damn usb ports ffs
anyone know if for sure it will work if i actually install ubuntu to a partition?
Sony vaio 13 i7-4500u so only got usb3 ports and small hard drive didnt wanna dual boot really

Problem with Nexus 5

Good Evening,I'm new to this forum,forgive me if i haven't introduced my self yet. By the way,i have a problem with my Nexus 5:today,as i've been trying to flash the cyanogenmod 14.1 i've encountered a problem,after flashing the recovery (twrp,latest version) my PC can't access internal memory anymore,installed and reinstalled drivers,ADB and fastboot over and over. the problem is that if i open the device manager it shows google nexus ADB Interface. If i write adb devices in the command prompt it shows nothing tho. i have both SuperSU and the recovery installed.
Help me out guys,i don't know what to do.