Database Develop

[Q] Looking for help. Cant boot phone, recovery nor use adb commands.

Hej guys. I really hope that you can help me with my problem
Have been trying for 2 days and looking at post but haven't been able to get it fixed.
Here goes.
I have been playing around with custom roms on my htc one for a while now.
Then when i was about to install a new custom rom, i first wiped my phone.
I properly wiped something that should not be wiped, because i ended up with no os and no custom rom zip file that i could install in twrp.
I then tryed sideloading revolutions, and it seemed to work because it ended up booting on the phone and i could select what programs too install with it... but halfway through it stoped and rebooted.
now i cant even get into recovery anymore, and booting the phone only gets it to htc briliant logo. Then it restarts and tryes going into recovery, but it cant, and ends up just restarting over and over again.
Tryed flashing cwm and twrp again, but still cant get into recovery.
adb dont fint my device, and i have tryed all drivers i could find.
Tryed using a RUU, but it fails. Properly because its not the right one, but cant fint one that fits.
Sooo... i think im in a real pickle right now.
my radio is :4a.14.3250.13
hboot: 1.44.0000
Thinking about going back with my phone, but with the warranty gone i dont know if they'll even look at it.
Hoping for some advise, or some ideas on what to do.
-dealba

fastboot erase cache in terminal or with all in one toolkit

Arh thanks for your reply.
Cant belive i dident try that.
but it worked, im now able to get into twrp.
It says that i have 0 mb internal storage?
should i try to flash twrp again or what should my aproach be ?

dealba said:
Arh thanks for your reply.
Cant belive i dident try that.
but it worked, im now able to get into twrp.
It says that i have 0 mb internal storage?
should i try to flash twrp again or what should my aproach be ?
Click to expand...
Click to collapse
try reboot recovery if that doesnt work install cwm non touch. i love twrp but i had the same issue with it and i havent had it with cwm

skinsfanbdh said:
try reboot recovery if that doesnt work install cwm non touch. i love twrp but i had the same issue with it and i havent had it with cwm
Click to expand...
Click to collapse
Okay thanks
So i tryed installing cwm the non touch version. but it says the same thing as twrp.
And that is that it cant mount /sdcard/

dealba said:
Okay thanks
So i tryed installing cwm the non touch version. but it says the same thing as twrp.
And that is that it cant mount /sdcard/
Click to expand...
Click to collapse
i dont think that is a problem. im not absolutely sure about that but what is the next step you trying to accomplish

skinsfanbdh said:
i dont think that is a problem. im not absolutely sure about that but what is the next step you trying to accomplish
Click to expand...
Click to collapse
Well, im really just trying to get an os flashed back on the phone so i can boot it, either by another custom rom or a stock rom.
But since i cant use adb commands, how do i get a new rom on there?

dealba said:
Well, im really just trying to get an os flashed back on the phone so i can boot it, either by another custom rom or a stock rom.
But since i cant use adb commands, how do i get a new rom on there?
Click to expand...
Click to collapse
you on a windows computer?

dealba said:
Well, im really just trying to get an os flashed back on the phone so i can boot it, either by another custom rom or a stock rom.
But since i cant use adb commands, how do i get a new rom on there?
Click to expand...
Click to collapse
i have had the same problem. what i did is in twrp recovery go to wipe --- format data --- type yes (WARNING you will lose all your files)

skinsfanbdh said:
you on a windows computer?
Click to expand...
Click to collapse
Yes, im running windows

dealba said:
Yes, im running windows
Click to expand...
Click to collapse
download all in one toolkit if you havent already its easy to use and easier for me to tell you what to do. plus i dont know how well you know adb and fastboot commands

rambo12345 said:
i have had the same problem. what i did is in twrp recovery go to wipe --- format data --- type yes (WARNING you will lose all your files)
Click to expand...
Click to collapse
okay thanks, now i can see my sdcard.
But still wondering how to get a rom on it so i can flash from twrp..

dealba said:
okay thanks, now i can see my sdcard.
But still wondering how to get a rom on it so i can flash from twrp..
Click to expand...
Click to collapse
adb sideload
its an option in the all in one tool kit but its easier or you can type the command

skinsfanbdh said:
download all in one toolkit if you havent already its easy to use and easier for me to tell you what to do. plus i dont know how well you know adb and fastboot commands
Click to expand...
Click to collapse
I got the toolkit now
got a 5 min post restriction so little slow on replying

dealba said:
I got the toolkit now
got a 5 min post restriction so little slow on replying
Click to expand...
Click to collapse
i think it it will be over after 3 more posts. plug your phone in. then open all in one toolkit and select adb sideload then just follow the on screen instructions

skinsfanbdh said:
i think it it will be over after 3 more posts. plug your phone in. then open all in one toolkit and select adb sideload then just follow the on screen instructions
Click to expand...
Click to collapse
Okay, did the side loader, and used android revolutions rom. It installed and and after staying on boot animation a few minnuts it started.
Thank you so much for your help, really appreciate it

dealba said:
Okay, did the side loader, and used android revolutions rom. It installed and and after staying on boot animation a few minnuts it started.
Thank you so much for your help, really appreciate it
Click to expand...
Click to collapse
no problem. have fun:victory:

skinsfanbdh said:
fastboot erase cache in terminal or with all in one toolkit
Click to expand...
Click to collapse
So I'll try here first. I am having the same issue, I can't get the device to boot into recovery, no matter if I clear the cache, or flash either one of twrp or CWM.
I unlocked the bootloader, I think used the all in one toolkit to flash the recovery. When that didn't work, I erased the cache and manually flashed the recovery, and it said it pushed successfully.
I am at a loss, I have no idea what to try next, any help would be appreciated.
******Finally got it, I had to disable Fast Boot in the Power options in Settings******

How do you copy update.zip from external to internal SD?
Sorry if it's a total no-brainer, but how do I manually copy a recovery zip to the internal update.zip? Can I do this from my phone (which is stuck in a bootloop: see below)? Or do I have to use ADB with my computer?
Turbojugend said:
So I'll try here first. I am having the same issue, I can't get the device to boot into recovery, no matter if I clear the cache, or flash either one of twrp or CWM.
I unlocked the bootloader, I think used the all in one toolkit to flash the recovery. When that didn't work, I erased the cache and manually flashed the recovery, and it said it pushed successfully.
I am at a loss, I have no idea what to try next, any help would be appreciated.
******Finally got it, I had to disable Fast Boot in the Power options in Settings******
Click to expand...
Click to collapse
My situation:
Using Open Recovery I tried to install CM7 with custom kernel on my XT720
It gave an error: "assert failed: write_raw_image... Status 7" As I was looking that up, my phone blackscreened. After a while I pulled the battery.
Then on startup it went into a bootloop after a picture of a broken screen saying "2ndboot kernel restart in progress." (Presumably the kernel wasn't properly applied?)
Trying to boot into bootloader says battery is too low.
Phone will only turn on when plugged into outlet.
What I think I need to do:
- Copy a good update from my external SD over the bad update.zip on the internal SD, and apply the update to reset the kernel, etc.
- Open Recovery could do this, if I could load it.
- I could load Openrecovery if I could get the bootloader to run,
- I could get the bootloader to run if my battery would charge

[TWRP][EXPERIMENTAL] suzuran twrp 3.0

Hello people,
I was able to successfully build twrp 3.0 for suzuran (our device, duh!) and thought I'd share the recovery.img so you can test and see what works and what doesn't.
The recovery was built in a CM13 similar environment (PAC), so there might be some issues when working with stock kernel.
Since this is an experimental build (I tested main functionalities and they work, but didn't get down to the nitty-gritty), here's a small disclaimer:
By flashing or booting the attached recovery you're risking damaging you device, or losing the data on your device!
Neither I nor anyone else but YOU is responsible should any bad unintended problems appear!
If you're feeling adventurous then feel free to flash the recovery.img (along with Androplus kernel) and try the sweetness that is TWRP 3.0 :good:
Download link:
April 3, 2016 (3.0.1)
March 25, 2016
March 21, 2016
March 12, 2016
Known issues:
Temperature reading is botched
Crypto might not be working, like AT ALL
usb connection doesn't work (only if you use this recovery with Androplus kernel)
There could be more problems, which is why this is EXPERIMENTAL for now
And now let's get to the sources!
kernel:
[url]https://github.com/oshmoun/kernel/tree/aosp/LA.BF64.1.2.2_rb4.7[/URL]
device sources:
[url]https://github.com/oshmoun/device-sony-suzuran/tree/master[/URL]
[url]https://github.com/oshmoun/device-sony-kitakami/tree/master[/URL]
[url]https://github.com/SonyCM/device-sony-common/commits/cm-13.0[/URL]
And now to thank the people who helped in this endeavor:
TWRP team for the awesome recovery!
@nilezon for the TWRP flags (which I still need to go through to check if I missed/need anything, especially crypto flags...)
FXP team for device sources, Especially @adfad666
All of the Sony AOSP contributors, they're awesome people!

It doesn't work on my Android 6.0 device:crying:

doesn't work on sony mm, stuck at sony logo

iMaeGoo said:
It doesn't work on my Android 6.0 device:crying:
Click to expand...
Click to collapse
tanto124 said:
doesn't work on sony mm, stuck at sony logo
Click to expand...
Click to collapse
Could you tell me if you have E5823 or E5803, I have an E5823 and it's working fine.
Also, are you sure you're not FLASHING the recovery.img? You need to just BOOT it directly from fastboot

oshmoun said:
Could you tell me if you have E5823 or E5803, I have an E5823 and it's working fine.
Also, are you sure you're not FLASHING the recovery.img? You need to just BOOT it directly from fastboot
Click to expand...
Click to collapse
E5823, version 32.1.A.1.163, bootloader unlocked, in fastboot mode, using command "fastboot boot TWRP3.img".
And it stucks at SONY logo.

iMaeGoo said:
E5823, version 32.1.A.1.163, bootloader unlocked, in fastboot mode, using command "fastboot boot TWRP3.img".
And it stucks at SONY logo.
Click to expand...
Click to collapse
this is really weird, did the MM update also change something in the bootloader in an inconvenient way?
Could you try the other recovery.img from nilezon's thread? If that boots using "fastboot boot recovery.img" then we'll know the problem is somewhere in the .img itself
EDIT: oh, also could you please check if your download wasn't corrupt? Here's the md5 hash of the file so you can check
69650eaccdd8b24a3efc0ef1b4bdffb8

oshmoun said:
this is really weird, did the MM update also change something in the bootloader in an inconvenient way?
Could you try the other recovery.img from nilezon's thread? If that boots using "fastboot boot recovery.img" then we'll know the problem is somewhere in the .img itself
EDIT: oh, also could you please check if your download wasn't corrupt? Here's the md5 hash of the file so you can check
69650eaccdd8b24a3efc0ef1b4bdffb8
Click to expand...
Click to collapse
69650eaccdd8b24a3efc0ef1b4bdffb8
The img's MD5 is right.
I'll try to boot Z5C_TWRP_152_v2_nilezon on my device later.
It worked before I upgraded to MM.

oshmoun said:
this is really weird, did the MM update also change something in the bootloader in an inconvenient way?
Could you try the other recovery.img from nilezon's thread? If that boots using "fastboot boot recovery.img" then we'll know the problem is somewhere in the .img itself
EDIT: oh, also could you please check if your download wasn't corrupt? Here's the md5 hash of the file so you can check
69650eaccdd8b24a3efc0ef1b4bdffb8
Click to expand...
Click to collapse
I have no idea.
Z5C_TWRP_152_v2_nilezon doesn't work on MM.
I flash Android 5.1 and try your TWRP3.0, still stuck at SONY logo(with no LED light).
Z5C_TWRP_152_v2_nilezon can work on 5.1.
Now I'm flashing MM again.

iMaeGoo said:
I have no idea.
Z5C_TWRP_152_v2_nilezon doesn't work on MM.
I flash Android 5.1 and try your TWRP3.0, still stuck at SONY logo(with no LED light).
Z5C_TWRP_152_v2_nilezon can work on 5.1.
Now I'm flashing MM again.
Click to expand...
Click to collapse
Thanks! Guess the issue lies in the MM update somewhere.
You just said that nilezon's recovery works on 5.1, but did you try it after flashing 5.1, or are you basing that statement on previous tests?
The issue here might be that you didn't downgrade the bootloader when you flashed 5.1 again, which would mean the issue will persist.

Hello,
I tried booting(didn't flash) with MM and it seemed to boot into recovery fine. Used it to do a cache wipe, but afterwards phone is stuck on boot screen. I can turn it off with power + volume, but it doesn't seem like I can go back to fast boot.

t4656 said:
Hello,
I tried booting(didn't flash) with MM and it seemed to boot into recovery fine. Used it to do a cache wipe, but afterwards phone is stuck on boot screen. I can turn it off with power + volume, but it doesn't seem like I can go back to fast boot.
Click to expand...
Click to collapse
You should be able to go into fastboot mode by turning device off, holding vol+ button, then connecting the device to your computer through usb

oshmoun said:
You should be able to go into fastboot mode by turning device off, holding vol+ button, then connecting the device to your computer through usb
Click to expand...
Click to collapse
Yeah thanks. Took something like 10 tries before it finally went into fastboot. Not sure what went wrong there. Also on my first try I was able to boot into your build of twrp. But afterwards when I try it just gets stuck on the logo again.

t4656 said:
Yeah thanks. Took something like 10 tries before it finally went into fastboot. Not sure what went wrong there. Also on my first try I was able to boot into your build of twrp. But afterwards when I try it just gets stuck on the logo again.
Click to expand...
Click to collapse
This is so freaky what the heck!!!
Could you flash bootloader from 5.1 ftf and see if it works properly then?
I'll (finally) update to MM today , so I'll witness the issues first hand.

oshmoun said:
Thanks! Guess the issue lies in the MM update somewhere.
You just said that nilezon's recovery works on 5.1, but did you try it after flashing 5.1, or are you basing that statement on previous tests?
The issue here might be that you didn't downgrade the bootloader when you flashed 5.1 again, which would mean the issue will persist.
Click to expand...
Click to collapse
I tried nilezon's recovery after flashing 5.1 and it worked.
I use FlashTool to write FTF file to my phone fully, include kernel.
Maybe it's my problem...
Thank you for your patience!

iMaeGoo said:
I tried nilezon's recovery after flashing 5.1 and it worked.
I use FlashTool to write FTF file to my phone fully, include kernel.
Maybe it's my problem...
Thank you for your patience!
Click to expand...
Click to collapse
nope, not your problem, it's everyone's
seems like my twrp version just refuses to boot sometimes.
Was able to successfully replicate the fastboot issue on 5.1 bootloader, so it's definitely this recovery.
Now the question is if it's a TWRP 3 issue, or just in the way I built it
EDIT: I guess this post answers my question
http://forum.xda-developers.com/showpost.php?p=65808636&postcount=137
another twrp 3 recovery is having the same issue
guess I'll have to make this recovery flashable in order for it to work properly
EDIT 2: wow, Androplus kernel seems to go well with TWRP 3. Updated first post with new instructions on how to use this.

oshmoun said:
nope, not your problem, it's everyone's
seems like my twrp version just refuses to boot sometimes.
Was able to successfully replicate the fastboot issue on 5.1 bootloader, so it's definitely this recovery.
Now the question is if it's a TWRP 3 issue, or just in the way I built it
EDIT: I guess this post answers my question
http://forum.xda-developers.com/showpost.php?p=65808636&postcount=137
another twrp 3 recovery is having the same issue
guess I'll have to make this recovery flashable in order for it to work properly
EDIT 2: wow, Androplus kernel seems to go well with TWRP 3. Updated first post with new instructions on how to use this.
Click to expand...
Click to collapse
Can not detect external SD or USB OTG (yet)
Can not detect external SD or USB OTG (yet)
Can not detect external SD or USB OTG (yet)
This will do the job until a proper dev makes a better version.
Maybe I had better wait...:crying::crying::crying:

iMaeGoo said:
Can not detect external SD or USB OTG (yet)
Can not detect external SD or USB OTG (yet)
Can not detect external SD or USB OTG (yet)
This will do the job until a proper dev makes a better version.
Maybe I had better wait...:crying::crying::crying:
Click to expand...
Click to collapse
ummm, my sdcard is getting detected :|
I'll post screenshots soon
EDIT: attached screenshots

oshmoun said:
ummm, my sdcard is getting detected :|
I'll post screenshots soon
EDIT: attached screenshots
Click to expand...
Click to collapse
Can external storages be found in Android system?

iMaeGoo said:
Can external storages be found in Android system?
Click to expand...
Click to collapse
everything concerning external sdcard function is working here as far as i tested (both in Stock mm rom and twrp3)

oshmoun said:
Could you tell me if you have E5823 or E5803, I have an E5823 and it's working fine.
Also, are you sure you're not FLASHING the recovery.img? You need to just BOOT it directly from fastboot
Click to expand...
Click to collapse
it's E5823 running 32.1.A.1.163 . I am sure that I was just booting , downloaded file is okay .

Unable to Unbrick phone

Hey guys,
My younger brother had TWRP installed on his OP3. Yesterday he applied OTA and his phone got bricked. I unbricked it from MSMtool method (Qualcom Driver). It got unbricked and i have stock rom now however phone is stuck at android is upgrading (45 minutes). I tried restarting it and now it is in boot loop. i tried to flash latest OxygenOS from adb sideload and it got bricked again. Can anyone tell me what to do now or what is wrong with the device.

abdullah.ahsan11 said:
Hey guys,
My younger brother had TWRP installed on his OP3. Yesterday he applied OTA and his phone got bricked. I unbricked it from MSMtool method (Qualcom Driver). It got unbricked and i have stock rom now however phone is stuck at android is upgrading (45 minutes). I tried restarting it and now it is in boot loop. i tried to flash latest OxygenOS from adb sideload and it got bricked again. Can anyone tell me what to do now or what is wrong with the device.
Click to expand...
Click to collapse
You have TWRP installed? Use Method 2 of the unbrick guide. Now you want to wipe every partition then adb push your rom (not sideload) and manually flash it. Make sure you are on the latest Bluspark twrp.

Puddi_Puddin said:
You have TWRP installed? Use Method 2 of the unbrick guide. Now you want to wipe every partition then adb push your rom (not sideload) and manually flash it. Make sure you are on the latest Bluspark twrp.
Click to expand...
Click to collapse
I am using method 2, the OS gets stuck on bootloop that's why i tried to sideload later
I don't have a working recovery, all i can get is stock recovery, how can i install twrp?
I've tried flashing (fastboot flash recovery recovery.img) it but it is not working

abdullah.ahsan11 said:
I am using method 2, the OS gets stuck on bootloop that's why i tried to sideload later
I don't have a working recovery, all i can get is stock recovery, how can i install twrp?
I've tried flashing (fastboot flash recovery recovery.img) it but it is not working
Click to expand...
Click to collapse
Why is it not working? Does it give an error or something?

Puddi_Puddin said:
Why is it not working? Does it give an error or something?
Click to expand...
Click to collapse
Yes, it says flashing partition not allowed.
I suppose it is because usb debugging is off.

abdullah.ahsan11 said:
Yes, it says flashing partition not allowed.
I suppose it is because usb debugging is off.
Click to expand...
Click to collapse
Nah, In windows, go to Device Manager. How does your device show up? It has to do with wrong drivers.

Puddi_Puddin said:
Nah, In windows, go to Device Manager. How does your device show up? It has to do with wrong drivers.
Click to expand...
Click to collapse
Yes It shows up correctly.

abdullah.ahsan11 said:
Yes It shows up correctly.
Click to expand...
Click to collapse
What is correctly? What does it say? You might want to try different ADB drivers. You should be able to always flash In fastboot..

abdullah.ahsan11 said:
Yes, it says flashing partition not allowed.
I suppose it is because usb debugging is off.
Click to expand...
Click to collapse
Check again the bootloader to be unlocked. Use the tool for that, is it on OP3 forum, then retry to get a stock rom up before anything else (TWRP, custom rom, etc)
Sent from my OnePlus3 using XDA Labs

follow this instruction -
1- go into twrp and wipe everything even internal and formate it .
2- unistall all adb driver and oneplus driver also .. then clean tmp file from window
3rd- install latest adb+ oneplus 3 driver ..again restrat ..
4th-boot in fastboot mod and lock your bootloader
5th-flast latest build of oxygen stock recovery from fastboot
6th than again wipe or factory reset the device via stock recovery
7th open stock recoery than flash latest build of oxygen os via sideload
8th reboot the device and setup quikly
9th-unlock bootloader, flash bluespark recovery , flash rom, flash supersu ..
10th play with device

Need help with Me176c, fastboot.... 123# screen

My Asus memo pad 7 is stuck on fastboot.... 123# screen. I've tried temporary recovery and had success installation with lineage-14.1 but nothing changed. Please help. Thanks.

Did you have Lollipop installed before?
Also, do I understand it correctly that you're able to get into the temp recovery session?

Yes lollipop was installed and rooted long time ago, after the issue I decided to put it away. I did loads after that though, so I don't think lollipop is still there.
It was first at boot screen, got this fastboot... 123# after I flashed a fastboot image. Flashed loads of recoveries, systems and boot images before and after the fastboot issue.
Hope this helps you understand the state it's in. Thanks for replying.

MJMJ7 said:
Yes lollipop was installed and rooted long time ago, after the issue I decided to put it away. I did loads after that though, so I don't think lollipop is still there.
It was first at boot screen, got this fastboot... 123# after I flashed a fastboot image. Flashed loads of recoveries, systems and boot images before and after the fastboot issue.
Hope this helps you understand the state it's in. Thanks for replying.
Click to expand...
Click to collapse
If the tablet boots into the screen with the 3 fastboot lines you are in DNX mode, which means you've likely messed up your bootloader. To restore the bootloader, follow the steps outlined in https://forum.xda-developers.com/showpost.php?p=73672837&postcount=5
If everything works, you should get to a second Fastboot screen with NORMAL BOOT etc. From there you can either start the temporary TWRP recovery session (see https://forum.xda-developers.com/showpost.php?p=73673438&postcount=7) to flash the Lollipop package you've downloaded earlier (UL-K013-WW-12.10.1.36-user.zip) or flash LineageOS.
If you want to flash LineageOS you need to unlock your bootloader. Download https://www.androidfilehost.com/?fid=312978532265362065, take the ESP.img from the ZIP and download https://github.com/me176c-dev/devic...recovery-3.1.1-20171119-UNOFFICIAL-me176c.img. Then run:
Code:
fastboot flash ESP ESP.img
fastboot flash recovery twrp-recovery-3.1.1-20171119-UNOFFICIAL-me176c.img
Power off your device, then press Volume Down + Power. Intel logo should show up, and ask if you want to go into recovery or fastboot. Go into recovery using Volume Down. Do a Factory reset again (it's under Wipe), then flash https://github.com/me176c-dev/devic...ge-14.1-20171119-UNOFFICIAL-me176c-signed.zip (e.g. put it on your external SD).

I will try these steps and update you. Thank you very much.

O yes! It worked. Tablet is now back in operation on lineageos. Going and get Gapps now. Thanks a lot lambdadroid

I believe my work on this tablet is not complete as I can't install Gapps. Installation failing every time. So I tried to reinstall lineage as this was installed before when I was trying all sorts to fix it.
Then when I followed the procedures you sent me, it booted into lineage after I unlocked the bootloader and installed twrp. So the system still had lineage from my fastboot installation attempts. What I can install now is the original version (ul k013 ww-12.10.1.36-user) and that works but I don't want this.
Any help on getting lineage to complete the installation? as it gets to the end with a little to go hut just never finishes (left this overnight)
Thanks.

lambdadroid said:
If the tablet boots into the screen with the 3 fastboot lines you are in DNX mode, which means you've likely messed up your bootloader. To restore the bootloader, follow the steps outlined in https://forum.xda-developers.com/showpost.php?p=73672837&postcount=5
If everything works, you should get to a second Fastboot screen with NORMAL BOOT etc. From there you can either start the temporary TWRP recovery session (see https://forum.xda-developers.com/showpost.php?p=73673438&postcount=7) to flash the Lollipop package you've downloaded earlier (UL-K013-WW-12.10.1.36-user.zip) or flash LineageOS.
If you want to flash LineageOS you need to unlock your bootloader. Download https://www.androidfilehost.com/?fid=312978532265362065, take the ESP.img from the ZIP and download https://github.com/me176c-dev/devic...recovery-3.1.1-20171119-UNOFFICIAL-me176c.img. Then run:
Code:
fastboot flash ESP ESP.img
fastboot flash recovery twrp-recovery-3.1.1-20171119-UNOFFICIAL-me176c.img
Power off your device, then press Volume Down + Power. Intel logo should show up, and ask if you want to go into recovery or fastboot. Go into recovery using Volume Down. Do a Factory reset again (it's under Wipe), then flash https://github.com/me176c-dev/devic...ge-14.1-20171119-UNOFFICIAL-me176c-signed.zip (e.g. put it on your external SD).
Click to expand...
Click to collapse
I believe my work on this tablet is not complete as I can't install Gapps. Installation failing every time. So I tried to reinstall lineage as this was installed before when I was trying all sorts to fix it.
Then when I followed the procedures you sent me, it booted into lineage after I unlocked the bootloader and installed twrp. So the system still had lineage from my fastboot installation attempts. What I can install now is the original version (ul k013 ww-12.10.1.36-user) and that works but I don't want this.
Any help on getting lineage to complete the installation? as it gets to the end with a little to go hut just never finishes (left this overnight)
Thanks.

MJMJ7 said:
I believe my work on this tablet is not complete as I can't install Gapps. Installation failing every time. So I tried to reinstall lineage as this was installed before when I was trying all sorts to fix it.
Then when I followed the procedures you sent me, it booted into lineage after I unlocked the bootloader and installed twrp. So the system still had lineage from my fastboot installation attempts. What I can install now is the original version (ul k013 ww-12.10.1.36-user) and that works but I don't want this.
Any help on getting lineage to complete the installation? as it gets to the end with a little to go hut just never finishes (left this overnight)
Thanks.
Click to expand...
Click to collapse
No need to reply twice.
Please clarify: What exactly is failing? The LineageOS ZIP or the OpenGApps ZIP? Do you get an error during installation or does it never finish the boot after installation?
Things you can try: Check TWRP log for errors (usually marked red if you click the bottom right button in TWRP). Try a factory reset in TWRP.

lambdadroid said:
No need to reply twice.
Please clarify: What exactly is failing? The LineageOS ZIP or the OpenGApps ZIP? Do you get an error during installation or does it never finish the boot after installation?
Things you can try: Check TWRP log for errors (usually marked red if you click the bottom right button in TWRP). Try a factory reset in TWRP.
Click to expand...
Click to collapse
Just thought you wouldn't be notified if I don't quote.
The gapps file is giving an error and failing, the lineageOS just stalls and never complete the installation.
I will try again now.....

patching system image unconditionally....
This is going on and on, about 10% left to complete but it never does. LineageOS installation.
Updater process ended with ERROR: 1
Error installing zip file '/external_sd/0-System zips/
Asus Memo pad 7 K013/gapps 7.1.zip'
And that's what I'm getting from the gapps installation.
Installation failed.

Got the Gapps to install, had to choose x86 version. Still no improvement from lineage.

MJMJ7 said:
patching system image unconditionally....
This is going on and on, about 10% left to complete but it never does. LineageOS installation.
Updater process ended with ERROR: 1
Error installing zip file '/external_sd/0-System zips/
Asus Memo pad 7 K013/gapps 7.1.zip'
And that's what I'm getting from the gapps installation.
Installation failed.
Click to expand...
Click to collapse
Maybe the file wasn't downloaded/copied properly. Enable ZIP file signature verification in the TWRP settings and flash the LineageOS package again. Does it print "Zip signature verified successfully"?

lambdadroid said:
Maybe the file wasn't downloaded/copied properly. Enable ZIP file signature verification in the TWRP settings and flash the LineageOS package again. Does it print "Zip signature verified successfully"?
Click to expand...
Click to collapse
Did it again with another copy and enabled the verification and all came out successfully. Thanks for your help.:good:

Stuck in Oneplus logo. Can't access recovery. Fastboot working.

Hi everyone.
I was trying to flash Nitrogen OS. First I flashed the latest firmware, then the actual rom and then GAPPS. After that my mobile got stuck in Oneplus logo without being able to go into recovery mode.
I tried using fastboot to flash the files in this thread(https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306) which worked once, but even after that I can't surpass the logo screen.
I've been trying to look for information but I can't find anything.
To clarify:
- I already tried erasing userdata and cache from fastboot
-I already tried flashing recovery images from twrp, stock and bluspark
Thanks in advance guys.

Pavononer23 said:
Hi everyone.
I was trying to flash Nitrogen OS. First I flashed the latest firmware, then the actual rom and then GAPPS. After that my mobile got stuck in Oneplus logo without being able to go into recovery mode.
I tried using fastboot to flash the files in this thread(https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306) which worked once, but even after that I can't surpass the logo screen.
I've been trying to look for information but I can't find anything.
Thanks in advance guys.
Click to expand...
Click to collapse
Which TWRP are you using? Which firmware are you flashing? You can't access recovery at all? I've run into plenty of bricks like this and I'm usually able to get back to recovery by forcing the device off (vol up + power hold) and rebooting back to recovery. and if that doesn't work I can at least get to the bootloader and re-flash a recovery file.

rykanator said:
Which TWRP are you using? Which firmware are you flashing? You can't access recovery at all? I've run into plenty of bricks like this and I'm usually able to get back to recovery by forcing the device off (vol up + power hold) and rebooting back to recovery. and if that doesn't work I can at least get to the bootloader and re-flash a recovery file.
Click to expand...
Click to collapse
I was using last bluspark recovery. I was flashing OB21 when everything happened.
There is no way I can access to recovery. I tried reflashing the stock recovery from that unbricking thread with all the other things through fastboot and I can't boot into recovery at all. It is the first time I face this error so I am lost.

Pavononer23 said:
I was using last bluspark recovery. I was flashing OB21 when everything happened.
There is no way I can access to recovery. I tried reflashing the stock recovery from that unbricking thread with all the other things through fastboot and I can't boot into recovery at all. It is the first time I face this error so I am lost.
Click to expand...
Click to collapse
can you boot into the bootloader/fastboot?

rykanator said:
can you boot into the bootloader/fastboot?
Click to expand...
Click to collapse
Yes I can

Pavononer23 said:
Yes I can
Click to expand...
Click to collapse
okay, well what I would do is boot into the bootloader, and then reflash the blu_spark recovery via adb so you can boot into it. then wipe everything and restart. but this time I would try the OB 20 firmware and not the 21. when I was on NOS I used that one and it worked just fine. I'm not sure if it made a difference, but I flashed the firmware both right before and right after flashing NOS

rykanator said:
okay, well what I would do is boot into the bootloader, and then reflash the blu_spark recovery via adb so you can boot into it. then wipe everything and restart. but this time I would try the OB 20 firmware and not the 21. when I was on NOS I used that one and it worked just fine. I'm not sure if it made a difference, but I flashed the firmware both right before and right after flashing NOS
Click to expand...
Click to collapse
It doesnt recognize my device through adb and I don't know why. If that worked I would have tried to sideload some firmware, but when I do adb devices it doesn't appear

Pavononer23 said:
It doesnt recognize my device through adb and I don't know why. If that worked I would have tried to sideload some firmware, but when I do adb devices it doesn't appear
Click to expand...
Click to collapse
idk if it'll recognize as an adb device if it's in the bootloader. maybe try fastboot devices? sorry, I'm just spitballin here

rykanator said:
idk if it'll recognize as an adb device if it's in the bootloader. maybe try fastboot devices? sorry, I'm just spitballin here
Click to expand...
Click to collapse
Somehow fastboot devices does send me that my device is there but adb devices no, I will try looking into that to see if that works. Thanks for the help anyway

Pavononer23 said:
Somehow fastboot devices does send me that my device is there but adb devices no, I will try looking into that to see if that works. Thanks for the help anyway
Click to expand...
Click to collapse
yeah! try fastboot flash recovery "recovery file name".img
make sure that recovery img file is in the platform-tools file (or wherever your adb files are) and see if that works!

rykanator said:
yeah! try fastboot flash recovery "recovery file name".img
make sure that recovery img file is in the platform-tools file (or wherever your adb files are) and see if that works!
Click to expand...
Click to collapse
It is not working, I think I lost my Oneplus 3t...

Pavononer23 said:
It is not working, I think I lost my Oneplus 3t...
Click to expand...
Click to collapse
I mean idk if you wanna do this, but you could always try to "format userdata", then flash the stock recovery, and then sideload OOS. but you would lose all of your data in your internal storage, and it's still not a guarantee. there are some posts about doing a full wipe and starting from scratch. I'd look into those. Best of luck reviving your OP3T

Pavononer23 said:
It is not working, I think I lost my Oneplus 3t...
Click to expand...
Click to collapse
just a tip, try posting the output instead of "it's not working",
so the devs here might be able to analyze the problem..

nicknacknuke said:
just a tip, try posting the output instead of "it's not working",
so the devs here might be able to analyze the problem..
Click to expand...
Click to collapse
I already post a lot of information on the first post:
Mobile not passing the first time Oneplus logo appears.
Only fastboot is working, not adb, not recovery.
I already tried flashing other recoveries and the stock one->Can't pass Oneplus logo anyway
Tried formatting userdata through fastboot and flashing the .img files from my first post->Not working

Then just do the Qualcomm restore and unlock, boot to fastboot and flash the latest TWRP. Then boot into TWRP and format cache partitions, system and data and then adb sideload using this option under TWRP advanced to flash firmware zip, NitrogenOS zip and then 8.1 Gapps and try booting to see if same thing happens again. You are using the NitrogenOS stock kernel and not some other?

pitrus- said:
Then just do the Qualcomm restore and unlock, boot to fastboot and flash the latest TWRP. Then boot into TWRP and format cache partitions, system and data and then adb sideload using this option under TWRP advanced to flash firmware zip, NitrogenOS zip and then 8.1 Gapps and try booting to see if same thing happens again. You are using the NitrogenOS stock kernel and not some other?
Click to expand...
Click to collapse
What do you mean by the Qualcomm restor and unlock? I already tried the flashing of latest TWRP and it did not work.
I was coming from Validus last beta but did a previous factory reset and that stuff.
Thank you for the answer

Pavononer23 said:
What do you mean by the Qualcomm restor and unlock? I already tried the flashing of latest TWRP and it did not work.
I was coming from Validus last beta but did a previous factory reset and that stuff.
Thank you for the answer
Click to expand...
Click to collapse
What he meant is probably unbrick tool - https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Try flashing official firmware with it and then try again by flashing TWRP and flashing Nitrogen.

przemcio510 said:
What he meant is probably unbrick tool - https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Try flashing official firmware with it and then try again by flashing TWRP and flashing Nitrogen.
Click to expand...
Click to collapse
I can't install the drivers:
-First, stupid Windows policy saying that its driver is the best one available.
-Second, choosing from a disk to avoid one saying that the driver is not a x64 one.

Pavononer23 said:
I already post a lot of information on the first post:
Mobile not passing the first time Oneplus logo appears.
Only fastboot is working, not adb, not recovery.
I already tried flashing other recoveries and the stock one->Can't pass Oneplus logo anyway
Tried formatting userdata through fastboot and flashing the .img files from my first post->Not working
Click to expand...
Click to collapse
None of that answer what he actually asked, which is: what was the output (error message, result, etc.) when you tried to flash TWRP?
Did it flash successfully, but still can't boot to TWRP? Or else, what was the exact error message?
In general, when asking for help and giving status, be specific as possible, and give as many details as possible. Saying you "tried xxx" or "it did not work" is not specific enough.
Seems silly, but I've seen a lot of times where it's as simple as the user not using the correct command or entering the right file name.

redpoint73 said:
None of that answer what he actually asked, which is: what was the output (error message, result, etc.) when you tried to flash TWRP?
Did it flash successfully, but still can't boot to TWRP? Or else, what was the exact error message?
In general, when asking for help and giving status, be specific as possible, and give as many details as possible. Saying you "tried xxx" or "it did not work" is not specific enough.
Seems silly, but I've seen a lot of times where it's as simple as the user not using the correct command or entering the right file name.
Click to expand...
Click to collapse
There were no errors when flashing TWRP. When I tried rebooting using fastboot(fastboot boot recovery.img) it got stuck in the message saying booting up... and the only thing that changed was that my phone left the bootloader screen to a screen with the Oneplus logo and a fastboot mode message under it.
The command I used was fastboot flash recovery recovery.img(Name of the actual recovery file)