Database Develop

emui 3.0 4g

Hi everyone!
Since I upgraded my p7 to emui 3.0 I have no 4g option anymore..
Has anyone the same? And how to get 4g back?
I'm french, sorry for my bad english

I have it just like you. I'm not french, but I live in France I've upgraded manualy, because I still didn't get my OTA update.

Yes, i've upgraded manualy from the last link of huawei blog (huawei.de)
I'm now using 3g network.. but it's so sloooow :crying:

j..simon said:
Yes, i've upgraded manualy from the last link of huawei blog (huawei.de)
I'm now using 3g network.. but it's so sloooow :crying:
Click to expand...
Click to collapse
just a question: motion control (in settings) is an empty page or has all the voice for control?
the first solution i can give to you is to try an hard reset of the phone...otherwise if hard reset doesn't work maybe your phone is a branded version so you need to first debrand (in italy this problem was related to people who flashed B609 over a brand fw)
if you have root maybe this will help http://forum.xda-developers.com/ascend-p7/general/ascend-p7-b602-emui-3-0-international-t2972854

usb2 said:
just a question: motion control (in settings) is an empty page or has all the voice for control?
the first solution i can give to you is to try an hard reset of the phone...otherwise if hard reset doesn't work maybe your phone is a branded version so you need to first debrand (in italy this problem was related to people who flashed B609 over a brand fw)
if you have root maybe this will help http://forum.xda-developers.com/ascend-p7/general/ascend-p7-b602-emui-3-0-international-t2972854
Click to expand...
Click to collapse
Yes, i have all the motion settings
I already hard reset it but still nothing
When i was on emui 2.3 it worked fine

j..simon said:
Yes, i have all the motion settings
I already hard reset it but still nothing
When i was on emui 2.3 it worked fine
Click to expand...
Click to collapse
do hard reset 3btn
or
to get it back download this https://mega.co.nz/#!BoUWjASI!PfSWMroeQB-QBAumV92qCaJ_QX6ln0avT3epXDwBm44
put in sd card and do 3btn way

rescue LTE and 4G is possible
j..simon said:
Yes, i've upgraded manualy from the last link of huawei blog (huawei.de)
I'm now using 3g network.. but it's so sloooow :crying:
Click to expand...
Click to collapse
I did factory reset and my phone got all 4G variants fully functional.
first replace 609 UPDATE in dload in SD card, then you must use local update option. that's all.

Simona Simmy said:
do hard reset 3btn
or
to get it back download this
put in sd card and do 3btn way
Click to expand...
Click to collapse
What is "3btn"?
muy bien said:
I did factory reset and my phone got all 4G variants fully functional.
first replace 609 UPDATE in dload in SD card, then you must use local update option. that's all.
Click to expand...
Click to collapse
I've already tried a local update with 1.21Go and 340Mo files after the first update, but it says me there is no UPDATE.app (there is one!)

j..simon said:
What is "3btn"?
I've already tried a local update with 1.21Go and 340Mo files after the first update, but it says me there is no UPDATE.app (there is one!)
Click to expand...
Click to collapse
3 button on your phone
Press them all together

Can i flash an european ROM into my honor 5C (chinese version NEM-L51)

Hello,
I have bought an Honor 5C, chinese version (NEM-UL10).
Can i flash any of the international (european) roms?
Thank you
Miguel

mjjferreira said:
Hello,
I have bought an Honor 5C, chinese version (NEM-UL10).
Can i flash any of the international (european) roms?
Thank you
Miguel
Click to expand...
Click to collapse
nop, only flash the one intended for ur model no
otherwise u may brick ur device:crying:

It does not work for the model NEM-AL10 3GB RAM, get a brick! AL10-2GB - lost SIM 100%
CHANGE OF THE LOCATION OF CN - EU
for the further ROM installation​
To UNBLOCK the LOADER! SURELY!
Using TWRP installed instead "eRecovery" (recovery2) !!!
BACKUP for TWRP is ALSO OBLIGATORY!
(surely drill the status of an unblocking of the loader)
1) We establish hw_EU.zip through TWRP (Using TWRP installed instead "eRecovery" (recovery2)), after installation click reload.
2) The device will not be able to load the system , reboot and launch itself stock recovery, will be reset to factory default settings , you press SHUTDOWN button.
3) Turn on phone. Long start and optimization. Tapping the build number in Settings -> About 7 times, then going back and selecting the option from the Development menu.
Enable "OEM unlock" in the Development menu. So we will have flashing opportunity phone through fastboot if we receive a brick!
4) We throw on the card dload folder with UPDATE.APP firmware file on the region -EU (NEM-L51C432Bxxx), insert the card into the phone turned off , click the three buttons , waiting for the start of the upgrade process and all !!!)))
:good::good:
PS: In my hw_EU.zip archive three files are used:
custom.bin - the file in which contains one record in which belonging to the region - Vendor Country Info is specified
oeminfo - the binary file, contains information on a phone model and on the version of a firmware
build.prop - the system file from a specific firmware
All these three files from the European firmware of NEM-L51
Don't use this archive for change of a location in other phone models of Honor!!!
This archive - it isn't simple to replace a method a location
This archive - preparation of phone for the subsequent updating by a firmware from the European NEM-L51 model

You need to debrand your phone.

DRUGER said:
method has
I made ​​the transition from Russian (European) firmware to the Chinese , and the Chinese in the European , fingerprint scanner is 100 %
CHANGE OF THE LOCATION OF CN - EU
for the further ROM installation
To UNBLOCK the LOADER! SURELY! To establish TWRP!
BACKUP for TWRP is ALSO OBLIGATORY!
(surely drill the status of an unblocking of the loader)
1) We establish hw_EU.zip through TWRP, after installation, we SWITCH OFF phone, you don't reboot!!!!
2) We return stock recovery, we do reboot, the device won't be able to load system, itself to reboot and will start stock recovery, there will be a dumping to factory, press the SHUTDOWN button
3) We turn on the device as usual, minutes 2-3 can hang on HONOR'S prompt, control of system and start of the device will go!
4) In the engineering menu we check vendor, in information about phone model and number of assembly
5) We throw in the dload folder, on a SD card, the firmware file from the region-EU, we insert the card into the switched-off phone, we press three buttons and wait for the update process!!!
Click to expand...
Click to collapse
does this work?????
has anyone tried??

venom007 said:
does this work?????
has anyone tried??
Click to expand...
Click to collapse
Finalize instructions, now all quickly and easily!
tested 100%

DRUGER said:
Finalize instructions, now all quickly and easily!
tested 100%
Click to expand...
Click to collapse
Good job

DRUGER said:
Finalize instructions, now all quickly and easily!
tested 100%
Click to expand...
Click to collapse
thats cool

As it worked for the 5x, it should work on almost any recent honor device, again good job

PalakMi said:
As it worked for the 5x, it should work on almost any recent honor device, again good job
Click to expand...
Click to collapse
I don't advise to use my instruction in other Honor devices for the reason that I used files specifically for NEM model!

it would work on device which has twrp support.

venom007 said:
it would work on device which has twrp support.
Click to expand...
Click to collapse
In my hw_EU.zip archive three files are used:
custom.bin - the file in which contains one record in which belonging to the region - Vendor Country Info is specified
oeminfo - the binary file, contains information on a phone model and on the version of a firmware
build.prop - the system file from a specific firmware
All these three files from the European firmware of NEM-L51
Once again I repeat!!! Don't use this archive for change of a location in other phone models of Honor!!!
This archive - it isn't simple to replace a method a location
This archive - preparation of phone for the subsequent updating by a firmware from the European NEM-L51 model

DRUGER said:
I don't advise to use my instruction in other Honor devices for the reason that I used files specifically for NEM model!
Click to expand...
Click to collapse
Roger that

can I use this method to change my nmo-l31 to the European NEM-L51 model ?

LIONS1 said:
can I use this method to change my nmo-l31 to the European NEM-L51 model ?
Click to expand...
Click to collapse
as said,only for NEM model

LIONS1 said:
can I use this method to change my nmo-l31 to the European NEM-L51 model ?
Click to expand...
Click to collapse
Don't even think about it

Just did this on my NEM-L21, and now I have an NEM-L51 ... So it works just fine

LINJEinc said:
Just did this on my NEM-L21, and now I have an NEM-L51 ... So it works just fine
Click to expand...
Click to collapse
do u have any problems so far after changing???

venom007 said:
do u have any problems so far after changing???
Click to expand...
Click to collapse
No problems so far, but haven't testing so much, have other things to do right now so.
But i will test more tonight after school.

LINJEinc said:
No problems so far, but haven't testing so much, have other things to do right now so.
But i will test more tonight after school.
Click to expand...
Click to collapse
ok, test it and report back

Finally.... Downgrade Huawei P9 from Android Nougat to Marshmallow {100% WORK}.

in the last few weeks, my Huawei p9 had many problems cuz of the last update!
my battery drain was increased, also the mobile shutting down when I used the camera even if battery more than 30%.
i thought all of those problems cuz of update not the battery, when I searched many times I found many guys written the same problems!
i contacted Huawei customer services, they told me that Huawei removed all software from their sites cuz of wrong use from some customers
here are how to Rollback your device without any problems.
1) First, download Android Nougat Rollback Package for Huawei P9 from here
middle east http://download-c.huawei.com/download/downloadCenter?downloadId=91646&version=357962&siteCode=kwen
europe http://download-c.huawei.com/download/downloadCenter?downloadId=91727&version=358124&siteCode=nl
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3)Now turn off your device.
4) Now press “Volume Up + Volume Down and Power Button” together. The update process will start automatically.
5) Now wait for some time to complete the process. Your firmware version should now be on “B300”.
6) Now download the full Marshmallow firmware from here
middle east http://huawei-firmware.com/rom/huawei-p9/eva-l19/324
or you can choose your eligible software from here
http://huawei-firmware.com/phone-list/huawei-p9
7) Now move the update.app file in SD card folder (Replace the rollback update.app file).
8) Now again press “Volume Up + Volume Down and Power Button” together to Downgrade Huawei P9 from Android Nougat to Android Marshmallow
9) Done.
This is the complete guide to Downgrade Huawei P9 from Android Nougat to Marshmallow. If you have any questions comment below.

This will be helpful. I have some question.
1. In number 2 do you mean to unzip the files and put the dload folder to sd card and leave update.app untouched?
2. And can you elaborate number 7 please? Is it the same update.app in number 2 and do I need to replace it to the downgrade firmware?
3. And is it okay to downgrade when my phone is currently network locked? Will it affect my phone or should i have it unlocked first? Btw my bootloader is still locked and I have no root.

I love you man! I nearly gave up! Thank you SO MUCH!
PS- Can we update the phone after rolling back? Or Will the OTA updates brick my phone?

It works indeed
Many thanks. It works perfect. Il had to use Hisuite to move the file in dload.
Now I get a notification asking me to update to emui 5. Ik don't want to do so of course but I can't stop the notification. Has somebody an idea ?

Don't understand guy.. am on oreo and never had any problems ..

Hello,
If I do the downgrade, will I lose my pics on my phone ?
Thanks for you feedback.

Reset Netwrok Settings
I was having the same issue ( sudden power-off when using camera or apps that use location), as well as the battery draining very fast.
I followed the steps suggested by Huawei to reset the network and (so far) it apperas to have resolved the issue. TBH its only been two days, but so far its looking good and did not require me to rollback or perform any other intervention. I'm too new to the forum to post a hotlink so you'll have to cut and paste it.
'https://consumer.huawei.com/in/support/how-to/newbie-guide/?resourceId=en-gb00718465'
I hope it helps!

Oh god, thank you so much! u did the depression leaves me. I love you man <3

Downgrade From 9.0.0.286

I managed to downgrade from 9.1.0.311 to 9.0.0.286 through HiSuite, but I want to downgrade even further, to EMUI 8.1(preferably 8.1.0.152?) as both EMUI 9 and 9.1 have very poor battery life on performance on my phone. I have the bootloader locked and my model is CLT-L09 C432. Before I updated to EMUI 9.1, I was on 9.0.0.270 and the option "Switch to other version" (EMUI 8.1) was available on HiSuite. Now it isn't on 286.
So, is there any way to downgrade?
Regards,

XTutorials said:
I managed to downgrade from 9.1.0.311 to 9.0.0.286 through HiSuite, but I want to downgrade even further, to EMUI 8.1(preferably 8.1.0.152?) as both EMUI 9 and 9.1 have very poor battery life on performance on my phone. I have the bootloader locked and my model is CLT-L09 C432. Before I updated to EMUI 9.1, I was on 9.0.0.270 and the option "Switch to other version" (EMUI 8.1) was available on HiSuite. Now it isn't on 286.
So, is there any way to downgrade?
Regards,
Click to expand...
Click to collapse
I'm just in the process of doing the same.
Use DLOAD method to get back to 9.0.0.195, then hisuite will give you the option to roll back to 8. (You'll need a usb-c otg cable) - This wipes the phone, be warned.
Download 9.0.0.195 here:
https://androidhost.ru/T8h
Basic Instructions:
Unzip the package. delete the CLT-LXX that you don't need. (so remove CLT-29 in your case)
copy the files to the SD card. Place the inside a folder called dload. (so you'll have "update_sd.zip" in the dload folder, another folder under dload called "CLT-L09_hw_eu" in which you'll have another zip called "update_sd_CLT-L09_hw_eu.zip"
open phone dialer and dial *#*#2846579#*#* go to Software Update and then select memory card upgrade. (alternatively with the device off press vol UP + DOWN + POWER and hold)
cross fingers and wait while is does it's thing.
Phone should now boot on 9.0.0.195, and hisuite /should/ give you the option to go back to 8.xx.
...You may be able to go back to 8 directly through dload method, but I've done it in two steps to be safe.
Someone else shared these images to help explain better. (Sorry whoever you are, I don't recall where I got this link from!)
https://imgur.com/JNQXIQA

stevo_125 said:
I'm just in the process of doing the same.
Use DLOAD method to get back to 9.0.0.195, then hisuite will give you the option to roll back to 8. (You'll need a usb-c otg cable) - This wipes the phone, be warned.
Download 9.0.0.195 here:
https://androidhost.ru/T8h
Basic Instructions:
Unzip the package. delete the CLT-LXX that you don't need. (so remove CLT-29 in your case)
copy the files to the SD card. Place the inside a folder called dload. (so you'll have "update_sd.zip" in the dload folder, another folder under dload called "CLT-L09_hw_eu" in which you'll have another zip called "update_sd_CLT-L09_hw_eu.zip"
open phone dialer and dial *#*#2846579#*#* go to Software Update and then select memory card upgrade. (alternatively with the device off press vol UP + DOWN + POWER and hold)
cross fingers and wait while is does it's thing.
Phone should now boot on 9.0.0.195, and hisuite /should/ give you the option to go back to 8.xx.
...You may be able to go back to 8 directly through dload method, but I've done it in two steps to be safe.
Someone else shared these images to help explain better. (Sorry whoever you are, I don't recall where I got this link from!)
https://imgur.com/JNQXIQA
Click to expand...
Click to collapse
Thanks, but do you have that 9.0.0.195 locally by mistake? It seems that on my computer it downloads with 256k/s and it would take 8 hours to download completely.

XTutorials said:
Thanks, but do you have that 9.0.0.195 locally by mistake? It seems that on my computer it downloads with 256k/s and it would take 8 hours to download completely.
Click to expand...
Click to collapse
That's androidhost.ru I'm afraid - it's painfully slow at the best of times Took me about 2 hours to download it from there earlier.

And it did finnaly work, fortunately. Now I am on good old EMUI 8.1 . Now I still have a question, would it be able to disable the system updates app? As there's always the red dot on the settings icon because it keeps telling me I have a EMUI 9.0.0.163 update. And I don't want to update. I turned off auto wifi updates download but I'm afraid to not force update it after some time.

Huawei P9 - upgrade

Hi All,
Please anyone advise me how to upgrade my Huawei P9 EVA L19. I'm from Sri Lanka.
My device version is C185B162 ( EMUI 4.1 ) which needs to upgrade Nougat ( Android 7).
If not possible, please let me know the best stable edition for this phone.
Many Thanks in advance.
Aselaj

aselaj said:
Hi All,
Please anyone advise me how to upgrade my Huawei P9 EVA L19. I'm from Sri Lanka.
My device version is C185B162 ( EMUI 4.1 ) which needs to upgrade Nougat ( Android 7).
If not possible, please let me know the best stable edition for this phone.
Many Thanks in advance.
Aselaj
Click to expand...
Click to collapse
For OTA, you must have a proper SIM card and WiFi connection - check in Settings/Software update do you receive OTA
Also, install latest HiSuite to PC, connect to the phone and find in HiSuite (at the bottom) an option to update.
Not sure, but also better have a valid SIM card in the phone
There are other options but first try these simplest and less intrusive ones
Ofc, supposing that phone is not rooted or TWRP installed (ie - must be the stock firmware)

Thanks...
zgfg said:
For OTA, you must have a proper SIM card and WiFi connection - check in Settings/Software update do you receive OTA
Also, install latest HiSuite to PC, connect to the phone and find in HiSuite (at the bottom) an option to update.
Not sure, but also better have a valid SIM card in the phone
There are other options but first try these simplest and less intrusive ones
Ofc, supposing that phone is not rooted or TWRP installed (ie - must be the stock firmware)
Click to expand...
Click to collapse
many Thanks for the advices.
Yes. phone is not rooted. I have tried both above ways & not getting update. So i thought to use other way ( dload) & try.
Please let me know the correct update package so i can download & push via SD card.
Is it risky to use that method...??
Also please tell me if upgrade would caused to any other issue such as battery draining issue.. If so how can i downgrade the version.?
many thanks...

aselaj said:
many Thanks for the advices.
Yes. phone is not rooted. I have tried both above ways & not getting update. So i thought to use other way ( dload) & try.
Please let me know the correct update package so i can download & push via SD card.
Is it risky to use that method...??
Also please tell me if upgrade would caused to any other issue such as battery draining issue.. If so how can i downgrade the version.?
many thanks...
Click to expand...
Click to collapse
You can DLOAD to L19 c185 b385 (initial Nougat), you must take FullOTA-MF-PV (PV is important) - as on the screenshot, from:
https://pro-teammt.ru/firmware-database/?firmware_model=EVA-L19c185
You can also install FirmwareFinder app (from Playstore or XDA) to download from the app
Download the two files, update.zip and update_data_full_hw_meafnaf.zip, do not unzip, put into DLOAD folder on your SD card.
Phone better to be charged, switch off, disconnect USB, press and keep pressing both Vol+ and Vol-, then boot - it should start DLOAD
Boot and login to system, and check if you can receive further OTA updates

Many thanks...
zgfg said:
You can DLOAD to L19 c185 b385 (initial Nougat), you must take FullOTA-MF-PV (PV is important) - as on the screenshot, from:
https://pro-teammt.ru/firmware-database/?firmware_model=EVA-L19c185
You can also install FirmwareFinder app (from Playstore or XDA) to download from the app
Download the two files, update.zip and update_data_full_hw_meafnaf.zip, do not unzip, put into DLOAD folder on your SD card.
Phone better to be charged, switch off, disconnect USB, press and keep pressing both Vol+ and Vol-, then boot - it should start DLOAD
Boot and login to system, and check if you can receive further OTA updates
Click to expand...
Click to collapse
Hi..
Many thanks for the valuable information.
I will try this way....

aselaj said:
Hi..
Many thanks for the valuable information.
I will try this way....
Click to expand...
Click to collapse
If you don't receive further OTA update, you can force DLOAD up to the latestEVA-L19c185b403
Download:
https://androidhost.ru/bN4
Unzip/untar until you extract a dload folder (do not extract further) and ReleaseDoc folder.
In the latter find Software Upgrade Guide and follow it - basically, you copy dload folder to your SD card and repeat the DLOAD method

zgfg said:
You can DLOAD to L19 c185 b385 (initial Nougat), you must take FullOTA-MF-PV (PV is important) - as on the screenshot, from:
https://pro-teammt.ru/firmware-database/?firmware_model=EVA-L19c185
You can also install FirmwareFinder app (from Playstore or XDA) to download from the app
Download the two files, update.zip and update_data_full_hw_meafnaf.zip, do not unzip, put into DLOAD folder on your SD card.
Phone better to be charged, switch off, disconnect USB, press and keep pressing both Vol+ and Vol-, then boot - it should start DLOAD
Boot and login to system, and check if you can receive further OTA updates
Click to expand...
Click to collapse
Hi..
Its unable to retrieve the file from above link. https://pro-teammt.ru/firmware-database/?firmware_model=EVA-L19c185
Can you please provide another active link to download L19 c185 b385 (initial Nougat) file.
Many Thanks.

aselaj said:
Hi..
Its unable to retrieve the file from above link. https://pro-teammt.ru/firmware-database/?firmware_model=EVA-L19c185
Can you please provide another active link to download L19 c185 b385 (initial Nougat) file.
Many Thanks.
Click to expand...
Click to collapse
Just downloaded update.zip (1.33 GB) and update_data_full_hw_meafnaf.zip (865.19 MB) with no problem - EVA-L19c185b385 FullOTA-MF-PV (80560)
Maybe download failed to you because of not-reliable WiFi connection.
Try using ADM browser - it downloads a big file in parallel chunks and it can resume download upon connection breaks

zgfg said:
Just downloaded update.zip (1.33 GB) and update_data_full_hw_meafnaf.zip (865.19 MB) with no problem - EVA-L19c185b385 FullOTA-MF-PV (80560)
Maybe download failed to you because of not-reliable WiFi connection.
Try using ADM browser - it downloads a big file in parallel chunks and it can resume download upon connection breaks
Click to expand...
Click to collapse
hi.
when i trying to download error shows as the attached image.
i tried with laptop & mobile phone as well. both showing same error.
please advise.
thanks

aselaj said:
Hi All,
Please anyone advise me how to upgrade my Huawei P9 EVA L19. I'm from Sri Lanka.
My device version is C185B162 ( EMUI 4.1 ) which needs to upgrade Nougat ( Android 7).
If not possible, please let me know the best stable edition for this phone.
Many Thanks in advance.
Aselaj
Click to expand...
Click to collapse
Same issue, expext when i dload i get software install error not compatible with current version

aselaj said:
hi.
when i trying to download error shows as the attached image.
i tried with laptop & mobile phone as well. both showing same error.
please advise.
thanks
Click to expand...
Click to collapse
Same

Apher said:
Same issue, expext when i dload i get software install error not compatible with current version
Click to expand...
Click to collapse
You are not downloading correctly
Select package as on the first screenshot.
Click on Update files - FILELIST.
In the popup you will have links to download zip files, this is what you have to downliad, not xml.
Copy one by one link to ADM Browse (all from mobile phone) and download.
Don't know how to help you otherwise

zgfg said:
You are not downloading correctly
Select package as on the first screenshot.
Click on Update files - FILELIST.
In the popup you will have links to download zip files, this is what you have to downliad, not xml.
Copy one by one link to ADM Browse (all from mobile phone) and download.
Don't know how to help you otherwise
Click to expand...
Click to collapse
Do i download all of them or just update.zip?
---------- Post added at 01:34 PM ---------- Previous post was at 01:28 PM ----------
Apher said:
Do i download all of them or just update.zip?
Click to expand...
Click to collapse
Also is there one for eva-l09 i have single sim model

Apher said:
Do i download all of them or just update.zip?
---------- Post added at 01:34 PM ---------- Previous post was at 01:28 PM ----------
Also is there one for eva-l09 i have single sim model
Click to expand...
Click to collapse
Ok nvm i found one for my model

Apher said:
Do i download all of them or just update.zip?
---------- Post added at 01:34 PM ---------- Previous post was at 01:28 PM ----------
Also is there one for eva-l09 i have single sim model
Click to expand...
Click to collapse
You have to download and use for DLOAD both update.zip and update_data_full_hw_meafnaf.zip (both files must be put as is into the DLOAD folder)
Some packages may even have three update***.zip files for DLOAD
Generally, judge by names, if package name shows both L09 and L19 and if you see in the filelist two files with the same names except that one contains L09 in its name, the other L19 in its name, then (for your L19) forget that with L19 in the name.
This package, as the name clearly says is for EVA-L19c185 not for some MHA, L19, c432 or else
In the OP post it was asked for EVA-L19c185
You came later, if you have different phone you have to go to the top of the page and instead of EVA-L19c185 enter EVA-L09c432 or exactly what is your model and cust (based on Settings/About)
Then press Find my model.
Only FullOTA-MF-PV packages are for DLOAD

zgfg said:
You have to download and use for DLOAD both update.zip and update_data_full_hw_meafnaf.zip (both files must be put as is into the DLOAD folder)
Some packages may even have three update***.zip files for DLOAD
Generally, judge by names, if package name shows both L09 and L19 and if you see in the filelist two files with the same names except that one contains L09 in its name, the other L19 in its name, then (for your L19) forget that with L19 in the name.
This package, as the name clearly says is for EVA-L19c185 not for some MHA, L19, c432 or else
In the OP post it was asked for EVA-L19c185
You came later, if you have different phone you have to go to the top of the page and instead of EVA-L19c185 enter EVA-L09c432 or exactly what is your model and cust (based on Settings/About)
Then press Find my model.
Only FullOTA-MF-PV packages are for DLOAD
Click to expand...
Click to collapse
So i downloaded firmware which says its FullOTA-MF-PV but when i flash i get incompability with current version error

Apher said:
So i downloaded firmware which says its FullOTA-MF-PV but when i flash i get incompability with current version error
Click to expand...
Click to collapse
By "flashing" do you mean DLOAD or what?
With DLOAD you cannot do rebranding by going from eg c185 to c432 or so - for that Bootloader must be unlocked and other methods used
What is exactly the full EMUI name and number, best please attach screenshot from Settings/About.
And what do you want to install
If you just want to update to the latest for your model and cust, did first try OTA (both SiM and WiFi must be on), and did you try updating by HiSuite (in the app on the PC find in the bottom Install or Update, not sure how is it named)

zgfg said:
By "flashing" do you mean DLOAD or what?
With DLOAD you cannot do rebranding by going from eg c185 to c432 or so - for that Bootloader must be unlocked and other methods used
What is exactly the full EMUI name and number, best please attach screenshot from Settings/About.
And what do you want to install
If you just want to update to the latest for your model and cust, did first try OTA (both SiM and WiFi must be on), and did you try updating by HiSuite (in the app on the PC find in the bottom Install or Update, not sure how is it named)
Click to expand...
Click to collapse
I originaly had C555 but now i have C900 and i flash with dload and i try dloading C555 firmware

Apher said:
I originaly had C555 but now i have C900 and i flash with dload and i try dloading C555 firmware
Click to expand...
Click to collapse
With c900 there are no OTAs (maybe) and no FullOTA-MF-PV firmwares for DLOAD
Going to different cXXX means rebranding and requires the unlocked Bootloader
I don't see firmwares for EVA-L09c555, only for c55.
But from the other post you tried to download L09GBRc555 - frankly, I don't know what's that (3UK H3G?)
Probably rebranding to c432 would be the best choice (with unlocked Bootloader but not with simple DLOAD - it would brick the phone)

zgfg said:
With c900 there are no OTAs (maybe) and no FullOTA-MF-PV firmwares for DLOAD
Going to different cXXX means rebranding and requires the unlocked Bootloader
I don't see firmwares for EVA-L09c555, only for c55.
But from the other post you tried to download L09GBRc555 - frankly, I don't know what's that (3UK H3G?)
Probably rebranding to c432 would be the best choice (with unlocked Bootloader but not with simple DLOAD - it would brick the phone)
Click to expand...
Click to collapse
The folks at telegram told me to testpoint my phone and flash board firmware and flash oeminfo using that, and im gonna use it so i can rebrand to EVA-AL10 so i can have emui 8, i used board firmware before since i hard bricked my p9 before