Database Develop

stuck at red logo

Hey guys,
i did stupid things witch my razr i and now i'm completely lost…maybe someone can help?
I've been impatient enough to try to flash the leaked jb rom 3 days ago. That did'nt work
No, whenever i power up the phone it shows the red M logo and nothing happens.
I can power it down by holding vol+down and power for more than 4 seconds.
If i release the keys, it goes back to te red M,
If i keep holding vol+down it boot s into AP fastboot flash mode (secure boot) 20.0f
i can choose recovery and that'll work, but i don't have an update for external storage. rebooting from there leads to red M.
Normal Powerup, Factory and BP Tools are choosable, log says Booting into… but nothing happens after that, i'll stay in fastboot.
Power off works.
I tried to flash various images via »fastboot flash boot/recovery/system«, but nothing worked out.
I flashed the files from Razri_Root_Linux, two files (retail central europe) from here sbf.droid-developers, but nothing helped, every reboot leads to the red M.
I read about RSD-Lite, tried to install it under Win7, got it, but was lost after the Program always complained about an invalid xml.
Since i don't own that machine i went back to my linuxbox where i found sbf_flash, but i don't get it how to put the pieces together (which file/s to use)
Any hints on how to go from here?
[EDIT:] I downloaded 91.2.26001.Retail.en.EU.zip and did all the steps from flashandboot.bat, read
fastboot flash boot
fastboot flash system
fastboot flash recovery
next step ist to select recovery, did this an cwm comes up, sideloaded RAZRiRoot2.zip everything is pisitively quited, no errors are shown.
reboot leads to red M
wiped data/factory reset, reboot
red Logo.
I'm completely lost, please help
[\EDIT]
greetings, D.

I had same problem
Hello.
I had same problem because I did very stupid thing. I flashed homemade JB and because some apps don´t work I tried downgrade my i to ICS back....
My i stucked at the red M then I tried same thing as you and phone still booted into red M.
So I tried in windows cmd and FlashAndRoot.bat from this .zip "91.2.26001.Retail.en.EU - 4.1.2" it did nothing, but I tried to choose in fastboot mode BP Tools, then my i booted and started to flash JB what I can see in command window. Phone was still connected to PC. After next reboot my phone has work normally with JB.
I hope to help you. Let me know.
Lucki

Hi Lucki
thanks for jumping by.
Lucki_X said:
Hello.
So I tried in windows cmd and FlashAndRoot.bat from this .zip "91.2.26001.Retail.en.EU - 4.1.2" it did nothing, but I tried to choose in fastboot mode BP Tools,
Click to expand...
Click to collapse
I tried this, and display on razr i says »Booting into BP Tools mode…«
and nothing more happens, display stays on…
and after some time pc automounts a "cd-rom drive" with some motorola files (Autorun.inf MDMSetup.xml MotorolaDeviceManagerSetup.exe MDMSetup.ini MotorolaDeviceManager_2.2.28)
but it still won't reboot…
i don't know.

Hi.
I had opened command window, "FlashAndRoot.bat" was running (I pressed any key) process was running (it means freezing ) and at this time I chose in fastboot booting into BP tools mode. My phone did restart and after it "FlashAndRoot.bat" process started to flash JB. After flashing my phone is going normally with JB. But some apps don´t work in JB.
Lucki

Lucki_X said:
Hi.
I had opened command window, "FlashAndRoot.bat" was running (I pressed any key) process was running (it means freezing ) and at this time I chose in fastboot booting into BP tools mode. My phone did restart and after it "FlashAndRoot.bat" process started to flash JB. After flashing my phone is going normally with JB. But some apps don´t work in JB.
Lucki
Click to expand...
Click to collapse
Doesn't work. :crying:
since i use linux i opened FlashAndRoot.bat in texteditor and executed the comands from there in terminal
only chance for the script to stop and wait is IMHO(correct-me-if-i'm-wrong) "adb wait-for-device push RAZRiRoot2.zip /sdcard/RAZRiRoot2.zip & adb reboot bootloader"
but that message "Booting into BP Tools mode…" just stays there forever, or does it take longer than 5minutes?

dogo77 said:
but that message "Booting into BP Tools mode…" just stays there forever, or does it take longer than 5minutes?
Click to expand...
Click to collapse
In my case it booted within 10 second and ran.
I am noob, I am writing just my experience. I couldn´t give you another advice, sorry.

I'm not sure how far the real installation went, but i would find Windows computer, get RSD (6.0-6.14) and try to flash ICS first. If failed due to impossibility of downgrading, then try JB. While you are able to boot to Recovery - don't loose hope yet

okaban said:
I'm not sure how far the real installation went, but i would find Windows computer, get RSD (6.0-6.14) and try to flash ICS first. If failed due to impossibility of downgrading, then try JB. While you are able to boot to Recovery - don't loose hope yet
Click to expand...
Click to collapse
Yeah. I'm still stuck at the red logo, or indeed, at a blueish "Bootloader unlocked warnig" message since i was able to install parts of an image from sbf.droid-developers. But flashing always fails while trying to flash system.img_signed.
After reading and trying a lot these last days i think i have to install windows somewhere just to get rsd-lite to run.
sbf_flash for linux didn't work for me and fastboot gives stange warnings about "Invalid sparse file format at header magi"…
so i'll give rsd a try before i give up. As i read in posts by HSDPilot, this is the only tool that works
thanks for your help!

Help me unbrick my Xperia T...

Hey guys,
seams like there went something wrong when trying to install latest cynagen Mod to my Xperia T - Now it is blak screen, is not recognized by flashtools or fastboot (so i cannot flash anything else). The LED is also not doing anything at all. The only thing that "works" is if i keep the power button pressed longer for 10 sec, my phone vibrates and shows the Sony logo - nothing else.
What i did: I opened the bootloader (which seemed to work, bootet the device afterwards and everything was ok), then i followed this instruction to install cynagen mod: wiki.cyanogenmod.org/w/Install_CM_for_mint
After Step 5 (Open a terminal on the PC and enter the following:
fastboot -i 0xfce flash boot boot.img
fastboot -i 0xfce reboot
While the device reboots, press the Volume rockers a few times to load recovery. )
the phone was dead. So i think there was something wrong with flashing the boot.img, but i see no way how to "undo" this, becuase of no tool will see my phone on the pc...
I really appreciate any help! Thanks, Simon

pumuckli said:
Hey guys,
seams like there went something wrong when trying to install latest cynagen Mod to my Xperia T - Now it is blak screen, is not recognized by flashtools or fastboot (so i cannot flash anything else). The LED is also not doing anything at all. The only thing that "works" is if i keep the power button pressed longer for 10 sec, my phone vibrates and shows the Sony logo - nothing else.
What i did: I opened the bootloader (which seemed to work, bootet the device afterwards and everything was ok), then i followed this instruction to install cynagen mod: wiki.cyanogenmod.org/w/Install_CM_for_mint
After Step 5 (Open a terminal on the PC and enter the following:
fastboot -i 0xfce flash boot boot.img
fastboot -i 0xfce reboot
While the device reboots, press the Volume rockers a few times to load recovery. )
the phone was dead. So i think there was something wrong with flashing the boot.img, but i see no way how to "undo" this, because of no tool will see my phone on the pc...
I really appreciate any help! Thanks, Simon
Click to expand...
Click to collapse
Maybe your battery is dead. Keep the power button pressed with a rubber band while it charges (wall charger) for a few hours. Then try to put it in fastboot mode and flash a kernel/boot.img with Flashtools, which is a lot simpler and less prone to typo errors than doing it yourself in a terminal/command line.
Also, you might rather look up tutorials here in XDA instead of on the CM site; they generally tend to be a lot easier to understand and even more practical.

If the phone displays the Sony logo then there's nothing wrong with the battery probably.
Use Flashtool to install a stock FTF is the first thing to do. CM requires an unlocked bootloader, I'm assuming you have a locked bootloader.
Sent from my LT30p using XDA Free mobile app

Last CM kernels are buggy.
Try with an older kernel, that you can pick from here (our device is MINT): http://fxpblog.co/cyanogenmod/cyanogenmod-11/

[Q] [ q ] how to repair bricked (bootloader) moto x 1052

How to repair my bricked moto x xt 1052
Hi everybody...
Im new here.
I hope someone resolve it.
My moto x xt 1052 is bricked, means it is not powerup normally, no any screen displayed, no boot image, boot animation, but goes into fastboot mode sometimes on trying to go in it using hardware key pressing i.e. Power and volume down keys.
Here is the brief description what was happened......
My moto was on stock kitkat 4.4.4 for upgrading it to lollipop On 19th jan i was tried to flash cm12 over cm11 nightly as described in that thread , for that i was unlocked my bootloader, rooted it, flashed CWM touch recovery, flashed superSu zip file and flashed cm12 nightly over cm11 as described. But my device was stucked at boot logo. For resolving that issue i was flashed boot.img of prev nightly release(i.e. 1/15) through command promp using commands '' cd Downloads... cd fastboot... fastboot flash boot boot.img.
It flashesh image file successfully and device is booted successfully. I was used it till last 4days and regularly updated cm12 nightly via cmupdater.
But 4days back i was tried to remove warning message of device is ulocked bootloaded which was irritated me using same flash method and logo.bin files which was given in another thread by other members. But my BOOTLOADER IS DAMAGED and no any display was seen. I read many threads to repair it but no anyone give easy step by step guide. I was tried to repair it using motoflasher given in 1 thred. But as shown there no my device was not shown in device manager asQUSB****9** THERE is only adb interface in device manager. Also it says in motoflasher that no device was connected and output was incorrect COM port, which was refused to flash bootloader. Another thred of rescurrection of bootloader is not so easy and also download links are not useful,shows item was removed.
There is no another way, i thought bootloader is a kernel, so i was flashed zwiel kernel by same flashing method by cmd.
The problem remaims same, moto care told thay it will cost 6k for repairong which is too high. The descreltion is given in details for anyone who finds my mistakes and tell me angd give me suggestion. Xda is big deveopers forum, i know someone will help me.. So plzzz help me.
HOW CAN I REPAIR MY BOOTLOADER AND SAVE MY MOTO which will not useful then usable as a paperweight.

Have you tried to simply re flash your stock 4.4.4 firmware via fastboot since you say you can get into fastboot mode? Or rsd your 4.4.4 firmware. If you can get into fastboot mode I think you should be able to fastboot your stock 4.4.4 and be back up and running.
When in fastboot mode and phone plugged in and you type "fastboot devices" does it display a string of numbers for your device? If yes then you are good to go.

I am having a similar issue with a Sprint Moto X (1st Gen). I am able to get to fastboot mode and I have flashed the stock image for 4.4.4 using mfastboot (also re-did it using RSD lite as the boot.img gave errors using mfastboot) but the phone only still boots to a dark screen and vibrates roughly every 15 seconds.
Anyone have an idea on what else I can try? I've been scouring the boards and youtube, but haven't really come across anything on this type of issue.

Has been RDS flashing process totally completed without any errors?

The flash finishes with no errors when it goes to reboot the phone I end up at the same spot of a black screen that vibrates like its powering on then repeats every 15 seconds like its stick in a loop. Odd... I never get the smallest hint to a picture on the screen.

​
chousue said:
The flash finishes with no errors when it goes to reboot the phone I end up at the same spot of a black screen that vibrates like its powering on then repeats every 15 seconds like its stick in a loop. Odd... I never get the smallest hint to a picture on the screen.
Click to expand...
Click to collapse
Your symptom I'm quoting is what I've seen when a bad logo.bin has been flashed to the phone.
Can you try another? Some are in http://forum.xda-developers.com/moto-x/themes-apps/collection-moto-boot-services-t2885395

Thanks for the suggestion.
I tried a dew different logos but the end result is still the same. Vibrates on power up, no display at all and repeats until I hold the volume down and count to like 10 when the next buzz cycle would happen so I can get into fastboot mode again. I should note that I can't see anything in this screen as well. I was starting to wonder if it was the screen that was the issue but the bootloop has me thinking otherwise.
I have another one with a bad screen and a replacement is on the way. I guess I can test it on this one as well but I'm sure the result will be the same.
I took a gamble on this one thinking I could bring i back to life, I figured the last owner just soft bricked it and flashing the latest stock would override what mess they did. I'll tinker around some more if there are some other options otherwise I can just flip it for parts i guess.
If I run the fastboot getvar all I get all the phone info so it gives me hope that something can be done, I just don't know what, it seems like I keep cycling through the same few processes hoping for a different result. I even tried the power + Volume down for two minutes thing that's supposed to bring up the "other" recovery menu, but with no display, i don't know what happening.
In a last ditch effort I did a tear down and connection check for all the parts so everything has been removed and firmly re-attached, certainly was nice to do that there instead of on the one I know will work once I replace the screen, but it sucks to still come up empty handed. Sorry for the long rant, it's just been a long few days of trying to find ways to bring this phone back to life.

Solved with downgrading
Sorry for bad english.
I had same issue.
But solved prev saturday hole day.
Using manual method instead of rsd.
Make sure u properly installed adb and mfastboot. For that open cmd and type adb. It shows command lines and then mfastboot. It also shows command lines then you are ready to go. If not, google it for how to install adb and also for mFastboot
Then download proper stock firmware for ur device. unzip it, u will get files of system, boot etc. Copy all this files and paste into mfastboot folder. Open command prompt in that folder by pressing shift and right key of mouse.
Then boot your moto into fastboot mode by pressing power and volume down key for a seconds. If u will not get in to fastboot mode try for many times unless u get it. I will get it after trying half hour.
Connect ur device to pc and run commans given in the following link. http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
End with-- fastboot adb reboot. It will reboot ur device.
Enjoy.

Thanks for the steps, I feel like I have done that already save for the few end steps with the oem commands.
So I flashed the print image using that guide and it still vibrates every 15 seconds and no display. I grabbed the retail file from the motorola site (oddly enough they only have TMO on the file name for some reason) and I flash this and it doesn't vibrate every 15 seconds, but still no display... Maybe in the end the display is bad after all...
Like mentioned before, I already have one coming in black for the one that works for sure...so I guess I'll test it on this one as well. Just wish it was as easy to disconnect/connect as my Nokia Lumia was, that took less than 10 minutes!

So, in the end it was the display afterall. I ended up getting another replacement screen as I really did not feel like attaching it and detaching it (yeah, I'm lazy sometimes). After setting up the new screen I plugged it in to charger and what do you know, battery at 0% then the motorola bootloader unlock screen after 5 or so minutes.
Now I have two phones, lol. One screen came without the speaker on the to fro some reason... And I think I just messed up my main phone removing the frame to add in that piece so lint and such doesn't get into the phone so easily... Dang it!
Edit - Yep, now it has a nice rainbow line display across the bottom where the navigate soft button would be... Guess I have to get one more screen!

could you please help me??
Iam using moto x XT1052 indian retail model...Many days b4 I have installed 5.1 brazalian lollipop backup via twrp but now i wanna come back to stock rom 4.4.4 kitkat via rsd lite..will it work or will my phone will brick bcoz of degrading process from 5.1 to 4.4.4??
plzz answer me if yes plz tell me the method to come back to kitkat
Sent from my XT1058 using XDA Free mobile app

sadik2112009 said:
could you please help me??
Iam using moto x XT1052 indian retail model...Many days b4 I have installed 5.1 brazalian lollipop backup via twrp but now i wanna come back to stock rom 4.4.4 kitkat via rsd lite..will it work or will my phone will brick bcoz of degrading process from 5.1 to 4.4.4??
plzz answer me if yes plz tell me the method to come back to kitkat
Sent from my XT1058 using XDA Free mobile app
Click to expand...
Click to collapse
Go to the General Forum there's a dedicated thread with official roms for your particular model. Use download the ROM and flash through rsdlite. Always make a backup since it will wipe your internal storage clean.
Sent from my XT1058 using Tapatalk

sadik2112009 said:
could you please help me??
Iam using moto x XT1052 indian retail model...Many days b4 I have installed 5.1 brazalian lollipop backup via twrp but now i wanna come back to stock rom 4.4.4 kitkat via rsd lite..will it work or will my phone will brick bcoz of degrading process from 5.1 to 4.4.4??
plzz answer me if yes plz tell me the method to come back to kitkat
Sent from my XT1058 using XDA Free mobile app
Click to expand...
Click to collapse
If you installed 5.1 by using one of the TWRP backups, and did NOT flash the leaked OTA zip files, then you should have only touched /system and /boot partitions.. in that case, it would be safe to flash 4.4.4.

thank u so muchh......
KidJoe said:
​
Your symptom I'm quoting is what I've seen when a bad logo.bin has been flashed to the phone.
Can you try another? Some are in http://forum.xda-developers.com/moto-x/themes-apps/collection-moto-boot-services-t2885395
Click to expand...
Click to collapse
thank you so much... this post saved my moto x...... i am facing this issue from last 15 days. so many pages visited but nothing help, but, after doing this it rebooted. may god bless you!:angel::angel::angel::angel:

Having same problem.
Please help if anyone can!
I can't resolve it by Fastboot in cmd.
I also tried typing mfastboot in all commands.

Having same problem.
Please help if anyone can!
I can't resolve it by Fastboot in cmd.
dont display anything
not charging not boot not start anything

Travisdroidx2 said:
Have you tried to simply re flash your stock 4.4.4 firmware via fastboot since you say you can get into fastboot mode? Or rsd your 4.4.4 firmware. If you can get into fastboot mode I think you should be able to fastboot your stock 4.4.4 and be back up and running.
When in fastboot mode and phone plugged in and you type "fastboot devices" does it display a string of numbers for your device? If yes then you are good to go.
Click to expand...
Click to collapse
I have a moto x of my friend xt1053, dont not what he has done with it.
but
it is in Encryption Unsuccessful Condition.
When I connect to pc. Windows show that motorola xt1053 is connected. device manager shows MTP device under portable devices.
Mototrola USB drivers have been installed successfully.
I can not boot xt1053 into fastboot mode or recovery. Neither by adb/fastboot nor by buttons. (volume down + Power).
adb devices command does not show any numbers as it normally does when device is connected.
how get it back to working condition. any expert to help or happen to be in the same boat?

Flashing back to System Image after Nightmare Root attempt?

Hi everyone, I tried to root my phone last night and despite following the instructions it is stuck on the green and white loading screen (all night long). I thought I would try resetting it and giving it another go, but I am getting beyond frustrated now. Right now the phone is in fastboot mode (bootloader unlocked) connected to my pc. I have opened CMD and executed the following command:
C:\Users\MyPc\Desktop\Razer\aura-p-global-3110>flash_all
the following lines of code appeared
C:\Users\MyPc\Desktop\Razer\aura-p-global-3110>set fastboot_cmd=fastboot
C:\Users\MyPc\Desktop\Razer\aura-p-global-3110>fastboot flash partition:0 gpt_both0.bin
and now my CMD is doing nothing, I cannot input anything and the cursor is just flashing... been like this for about 20 minutes now. Can someone tell me what I am doing wrong? I currently have a brick of a phone and it's kinda inconvenient.
Thanks

PyroVee said:
Hi everyone, I tried to root my phone last night and despite following the instructions it is stuck on the green and white loading screen (all night long). I thought I would try resetting it and giving it another go, but I am getting beyond frustrated now. Right now the phone is in fastboot mode (bootloader unlocked) connected to my pc. I have opened CMD and executed the following command:
C:\Users\MyPc\Desktop\Razer\aura-p-global-3110>flash_all
the following lines of code appeared
C:\Users\MyPc\Desktop\Razer\aura-p-global-3110>set fastboot_cmd=fastboot
C:\Users\MyPc\Desktop\Razer\aura-p-global-3110>fastboot flash partition:0 gpt_both0.bin
and now my CMD is doing nothing, I cannot input anything and the cursor is just flashing... been like this for about 20 minutes now. Can someone tell me what I am doing wrong? I currently have a brick of a phone and it's kinda inconvenient.
Thanks
Click to expand...
Click to collapse
Have you got this solved yet?
I've never attempted to use CMD to flash my RP2 but since you're in fastboot that's where you need to be as long as you can type fastboot devices and get your phones id to appear. If so then all you need to do is have the image extracted and I placed mine in my fastboot directory and just double click the flash_all.bat file..golden! It'll flash everything and then reboot after installing ?

Mi A2 won't boot past Android One

I charged my Mi A2 overnight and woke this morning to find that it won't boot past the Mi A2 splash screen; it shows the splash screen for a few of seconds and then dies. I read advice to hold down power and 'up' keys, this just resulted in the same. I tried power and 'down' key and that got me as far as the Fast Boot splash screen, but no further (phone just continued to display that splash screen). I've tried taking the SIM out and turning it on - no change. I tried opening it up and disconnecting the battery for 3 minutes - no change. I'd be very grateful if anyone could suggest a fix. I know this is hugely unhelpful, but I can't remember what I did to the phone in terms of unlocking the bootloader and/or rooting, but I have a feeling I left it stock (I've owned the phone for a couple of years and haven't changed anything material since initial setup).

Disclaimer: you need adb tools to execute following command. You can find info where your wish about it.
Try to make it on FastBoot mode, then attach to PC and execute
fastboot reboot
If it brings you again to flashing screen, again, bring the phone in fastboot mode. Then try to change active slot.
fastboot --set-active=a
If not working with a, try with b. After setting it, launch the command to reboot again.
What recovery do you have? Pressing up + power when turning on where brings you?

Martinocom said:
Disclaimer: you need adb tools to execute following command. You can find info where your wish about it.
Try to make it on FastBoot mode, then attach to PC and execute
fastboot reboot
If it brings you again to flashing screen, again, bring the phone in fastboot mode. Then try to change active slot.
fastboot --set-active=a
If not working with a, try with b. After setting it, launch the command to reboot again.
What recovery do you have? Pressing up + power when turning on where brings you?
Click to expand...
Click to collapse
Thank you very much for your help.
Executing fastboot reboot via adb just brought me back to the Android One splash screen for a few seconds before the screen went black.
Changing the active slot to both A and B gave me the following error message:
FAILED (remote: 'Slot Change is not allowed in Lock State')
Pressing up + power when turning on just brought me to the Android One splash screen for a few seconds before the screen went black. I held those two buttons down for several minutes and the same thing kept happening: splash screen followed by black, repeatedly.
Is there anything else I can try?

You can try fastboot oem unlock or
fastboot flashing unlock to try to fix the "Locked State".
If I'm not wrong it erases your data! Before doing it please be sure and wait for some more time: maybe there is another solution for it!!!​
Main reason I'm making you this steps is that I think your phone applied some kind of system update that break something. Thanks to A/B partition maybe you can have a working system on the "not corrupted" one, so I'm trying to get you into it (either A or B)
Remember that doing this commands sometimes make the situation worse, or format your data, so please read if there are any side effects.
If nothing will work you can try to wait for someone more expert than me. Maybe you have a chance to recover from this state.
Another thing: turn on the phone (normally) without holding it in charge. I had a bug that won't let me pass the splash screen if phone was charging.
If really nothing works, try to find a tutorial on how to flash a ROM via TWRP, there are plenty of them. You will probably loose your data.

Martinocom said:
You can try fastboot oem unlock or
fastboot flashing unlock to try to fix the "Locked State".
If I'm not wrong it erases your data! Before doing it please be sure and wait for some more time: maybe there is another solution for it!!!​
Main reason I'm making you this steps is that I think your phone applied some kind of system update that break something. Thanks to A/B partition maybe you can have a working system on the "not corrupted" one, so I'm trying to get you into it (either A or B)
Remember that doing this commands sometimes make the situation worse, or format your data, so please read if there are any side effects.
If nothing will work you can try to wait for someone more expert than me. Maybe you have a chance to recover from this state.
Another thing: turn on the phone (normally) without holding it in charge. I had a bug that won't let me pass the splash screen if phone was charging.
If really nothing works, try to find a tutorial on how to flash a ROM via TWRP, there are plenty of them. You will probably loose your data.
Click to expand...
Click to collapse
Thank you.
If anyone reading knows of a way to get my phone to boot without losing my data I'd be very grateful for your help.